The port option in /etc/chrony.conf can be set to 0 to make chrony daemon to never open any listening port for server operation and to operate strictly in a client-only mode.
In order to prevent unauthorized connection of devices, unauthorized transfer of information, or unauthorized tunneling (i.e., embedding of data types within data types), organizations must disable or restrict unused or unnecessary physical and logical ports/protocols on information systems. Operating systems are capable of providing a wide variety of functions and services. Some of the functions and services provided by default may not be necessary to support essential organizational operations. Additionally, it is sometimes convenient to provide multiple services from a single component (e.g., VPN and IPS); however, doing so increases risk over limiting the services provided by any one component. To support the requirements and principles of least functionality, the operating system must support the organizational requirements, providing only essential capabilities and limiting the use of ports, protocols, and/or services to only those required, authorized, and approved to conduct official business or to address authorized quality of life issues.
Chrony is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More information on chrony can be found at https://chrony-project.org/. Chrony can be configured to be a client and/or a server. Add or edit server or pool lines to /etc/chrony.conf as appropriate:
server <remote-server>Multiple servers may be configured.
If chrony is in use on the system proper configuration is vital to ensuring time synchronization is working properly.
The cmdport option in /etc/chrony.conf can be set to 0 to stop chrony daemon from listening on the UDP port 323 for management connections made by chronyc.
Minimizing the exposure of the server functionality of the chrony daemon diminishes the attack surface.
The maxpoll should be configured to $var_time_service_set_maxpoll in /etc/ntp.conf or /etc/chrony.conf (or /etc/chrony.d/) to continuously poll time servers. To configure maxpoll in /etc/ntp.conf or /etc/chrony.conf (or /etc/chrony.d/) add the following after each server, pool or peer entry:
maxpoll $var_time_service_set_maxpollto server directives. If using chrony, any pool directives should be configured too.
Inaccurate time stamps make it more difficult to correlate events and can lead to an inaccurate analysis. Determining the correct time a particular event occurred on a system is critical when conducting forensic analysis and investigating system events. Sources outside the configured acceptable allowance (drift) may be inaccurate. Synchronizing internal information system clocks provides uniformity of time stamps for information systems with multiple system clocks and systems connected over a network. Organizations should consider endpoints that may not have regular access to the authoritative time server (e.g., mobile, teleworking, and tactical endpoints).
Depending on specific functional requirements of a concrete
production environment, the Fedora system can be
configured to utilize the services of the chronyd NTP daemon (the
default), or services of the ntpd NTP daemon. Refer to
https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/system_administrators_guide/ch-configuring_ntp_using_the_chrony_suite
for more detailed comparison of the features of both of the choices, and for
further guidance how to choose between the two NTP daemons.
Additional NTP servers can be specified for time synchronization. To do so,
perform the following:
server ntpserver
Specifying additional NTP servers increases the availability of accurate time data, in the event that one of the specified servers becomes unavailable. This is typical for a system acting as an NTP server for other systems.
Depending on specific functional requirements of a concrete
production environment, the Fedora system can be
configured to utilize the services of the chronyd NTP daemon (the
default), or services of the ntpd NTP daemon. Refer to
https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/system_administrators_guide/ch-configuring_ntp_using_the_chrony_suite
for more detailed comparison of the features of both of the choices, and for
further guidance how to choose between the two NTP daemons.
To specify a remote NTP server for time synchronization, perform the following:
server ntpserverThis instructs the NTP software to contact that remote server to obtain time data.
Synchronizing with an NTP server makes it possible to collate system logs from multiple sources or correlate computer events with real time events.
chrony is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More information on chrony can be found at https://chrony-project.org/. Chrony can be configured to be a client and/or a server. To ensure that chronyd is running under chrony user account, remove any -u ... option from OPTIONS other than -u chrony, as chrony is run under its own user by default. This recommendation only applies if chrony is in use on the system.
If chrony is in use on the system proper configuration is vital to ensuring time synchronization is working properly.
The system should be configured to use time servers that support Network Time Security (NTS). The specified time server must support NTS and must be configured to use NTS. To configure NTS for given time server add nts to each server or pool line in /etc/chrony.conf.
Network Time Security (NTS) uses Transport Layer Security (TLS) to secure Network Time Protocol (NTP) communications. Not using NTS could allow an attacker to interpret and modify the data sent back from the time server Inaccurate time stamps make it more difficult to correlate events and can lead to an inaccurate analysis. Determining the correct time a particular event occurred on a system is critical when conducting forensic analysis and investigating system events. Sources outside the configured acceptable allowance (drift) may be inaccurate.
Check that Chrony only has time sources configured with the server directive.
Depending on the infrastructure being used the pool directive may not be supported. Using the server directive allows for better control of where the system gets time data from.
Chrony is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More information on chrony can be found at https://chrony-project.org/. Chrony can be configured to be a client and/or a server. Add or edit server or pool lines to /etc/chrony.conf as appropriate:
server <remote-server>Multiple servers may be configured.
If chrony is in use on the system proper configuration is vital to ensuring time synchronization is working properly.
Synchronizing internal information system clocks provides uniformity of time stamps for information systems with multiple system clocks and systems connected over a network.
Inaccurate time stamps make it more difficult to correlate events and can lead to an inaccurate analysis. Determining the correct time a particular event occurred on a system is critical when conducting forensic analysis and investigating system events.
To properly set the group owner of /etc/chrony.keys, run the command:
$ sudo chgrp chrony /etc/chrony.keys
The ownership of the /etc/chrony.keys file by the chrony group is important because this file hosts chrony cryptographic keys. Protection of this file is critical for system security. Assigning the ownership to chrony ensures exclusive control of the chrony cryptography keys.
To properly set the owner of /etc/chrony.keys, run the command:
$ sudo chown root /etc/chrony.keys
The ownership of the /etc/chrony.keys file by the chrony user is important because this file hosts chrony cryptographic keys. Protection of this file is critical for system security. Assigning the ownership to chrony ensures exclusive control of the chrony cryptographic keys.
To properly set the permissions of /etc/chrony.keys, run the command:
$ sudo chmod 0640 /etc/chrony.keys
Setting correct permissions on the /etc/chrony.keys file is important because this file hosts chrony cryptographic keys. Protection of this file is critical for system security. Assigning the correct mode ensures exclusive control of the chrony cryptographic keys.
ntpd is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More information on NTP can be found at http://www.ntp.org. ntp can be configured to be a client and/or a server. To ensure that ntpd implements correct server restrictions, make sure that the following lines exist in the file /etc/ntpd.conf:
restrict -4 default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noqueryThis recommendation only applies if ntp is in use on the system.
If ntp is in use on the system proper configuration is vital to ensuring time synchronization is working properly.
ntp is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More information on NTP can be found at http://www.ntp.org. ntp can be configured to be a client and/or a server. To ensure that ntpd is running as ntp user, Add or edit the OPTIONS variable in /etc/sysconfig/ntpd to include ' -u ntp:ntp ':
OPTIONS="-u ntp:ntp"This recommendation only applies if ntp is in use on the system.
If ntp is in use on the system proper configuration is vital to ensuring time synchronization is working properly. Running ntpd under dedicated user accounts limits the attack surface for potential attacker exploiting security flaws in the daemon or the protocol.
Additional NTP servers can be specified for time synchronization in the file /etc/ntp.conf. To do so, add additional lines of the following form, substituting the IP address or hostname of a remote NTP server for ntpserver:
server ntpserver
Specifying additional NTP servers increases the availability of accurate time data, in the event that one of the specified servers becomes unavailable. This is typical for a system acting as an NTP server for other systems.
To specify a remote NTP server for time synchronization, edit the file /etc/ntp.conf. Add or correct the following lines, substituting the IP or hostname of a remote NTP server for ntpserver:
server ntpserverThis instructs the NTP software to contact that remote server to obtain time data.
Synchronizing with an NTP server makes it possible to collate system logs from multiple sources or correlate computer events with real time events.
System time should be synchronized between all systems in an environment. This is
typically done by establishing an authoritative time server or set of servers and having all
systems synchronize their clocks to them.
The chrony package can be installed with the following command:
$ sudo dnf install chrony
Time synchronization is important to support time sensitive security mechanisms like Kerberos and also ensures log files have consistent time records across the enterprise, which aids in forensic investigations.
The ntpd service should be installed.
Time synchronization (using NTP) is required by almost all network and administrative tasks (syslog, cryptographic based services (authentication, etc.), etc.). Ntpd is regulary maintained and updated, supporting security features such as RFC 5906.
The ntpd service should not be installed.
Inaccurate time stamps make it more difficult to correlate events and can lead to an inaccurate analysis. Determining the correct time a particular event occurred on a system is critical when conducting forensic analysis and investigating system events. Sources outside the configured acceptable allowance (drift) may be inaccurate.
The systemd_timesyncd service should be installed.
Time synchronization (using NTP) is required by almost all network and administrative tasks (syslog, cryptographic based services (authentication, etc.), etc.). systemd_timesyncd is a part of the systemd suite and acts as a NTP client.
The systemd_timesyncd service should not be installed.
Inaccurate time stamps make it more difficult to correlate events and can lead to an inaccurate analysis. Determining the correct time a particular event occurred on a system is critical when conducting forensic analysis and investigating system events. Sources outside the configured acceptable allowance (drift) may be inaccurate.
chrony is a daemon which implements the Network Time Protocol (NTP) is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More information on chrony can be found at https://chrony-project.org/. Chrony can be configured to be a client and/or a server. To enable Chronyd service, you can run: # systemctl enable chronyd.service This recommendation only applies if chrony is in use on the system.
If chrony is in use on the system proper configuration is vital to ensuring time synchronization is working properly.
Run the following command to determine the current status of the
chronyd service:
$ sudo systemctl is-active chronydIf the service is running, it should return the following:
activeNote: The chronyd daemon is enabled by default.
ntpd service:
$ sudo systemctl is-active ntpdIf the service is running, it should return the following:
activeNote: The ntpd daemon is not enabled by default. Though as mentioned in the previous sections in certain environments the ntpd daemon might be preferred to be used rather than the chronyd one. Refer to: https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/system_administrators_guide/ch-configuring_ntp_using_the_chrony_suite for guidance which NTP daemon to choose depending on the environment used.
Enabling some of chronyd or ntpd services ensures
that the NTP daemon will be running and that the system will synchronize its
time to any servers specified. This is important whether the system is
configured to be a client (and synchronize only its own clock) or it is also
acting as an NTP server to other systems. Synchronizing time is essential for
authentication services such as Kerberos, but it is also important for
maintaining accurate logs and auditing possible security breaches.
The chronyd and ntpd NTP daemons offer all of the
functionality of ntpdate, which is now deprecated.
The ntp service can be enabled with the following command:
$ sudo systemctl enable ntp.service
Enabling the ntp service ensures that the ntp
service will be running and that the system will synchronize its time to
any servers specified. This is important whether the system is configured to be
a client (and synchronize only its own clock) or it is also acting as an NTP
server to other systems. Synchronizing time is essential for authentication
services such as Kerberos, but it is also important for maintaining accurate
logs and auditing possible security breaches.
The NTP daemon offers all of the functionality of ntpdate, which is now
deprecated.
The ntpd service can be enabled with the following command:
$ sudo systemctl enable ntpd.service
Enabling the ntpd service ensures that the ntpd
service will be running and that the system will synchronize its time to
any servers specified. This is important whether the system is configured to be
a client (and synchronize only its own clock) or it is also acting as an NTP
server to other systems. Synchronizing time is essential for authentication
services such as Kerberos, but it is also important for maintaining accurate
logs and auditing possible security breaches.
The NTP daemon offers all of the functionality of ntpdate, which is now
deprecated.
The systemd_timesyncd service can be enabled with the following command:
$ sudo systemctl enable systemd_timesyncd.service
Enabling the systemd_timesyncd service ensures that this host
uses the ntp protocol to fetch time data from a ntp server.
Synchronizing time is essential for authentication
services such as Kerberos, but it is also important for maintaining accurate
logs and auditing possible security breaches.
Additional information on Ubuntu network time protocol is
available at
https://help.ubuntu.com/lts/serverguide/NTP.html.en.
systemd-timesyncd is a daemon that has been added for synchronizing the system clock across the network. The systemd-timesyncd daemon implements: - Implements an SNTP client - Runs with minimal privileges - Saves the current clock to disk every time a new NTP sync has been acquired - Is hooked up with networkd to only operate when network connectivity is available Add or edit server or pool lines to /etc/systemd/timesyncd.conf as appropriate:
server <remote-server>Multiple servers may be configured.
Configuring systemd-timesyncd ensures time synchronization is working properly.
systemd-timesyncd server configuration should have RootDistanceMaxSec is listed in accordance with local policy. This setting describes the maximum estimated time required for a packet to travel to the server connected.
Configuring systemd-timesyncd RootDistanceMaxSec ensures time synchronization is using servers that are close enough to the client.