yum should be configured to remove previous software components after new versions have been installed. To configure yum to remove the previous software components after updating, set the clean_requirements_on_remove to 1 in /etc/yum.conf.
Previous versions of software components that are not removed from the information system after updates have been installed may be exploited by some adversaries.
To ensure that the packages comprising the available updates will be automatically installed by dnf-automatic, set apply_updates to yes under [commands] section in /etc/dnf/automatic.conf.
Installing software updates is a fundamental mitigation against the exploitation of publicly-known vulnerabilities. If the most recent security patches and updates are not installed, unauthorized users may take advantage of weaknesses in the unpatched software. The lack of prompt attention to patching could result in a system compromise. The automated installation of updates ensures that recent security patches are applied in a timely manner.
To configure dnf-automatic to install only security updates automatically, set upgrade_type to security under [commands] section in /etc/dnf/automatic.conf.
By default, dnf-automatic installs all available updates. Reducing the amount of updated packages only to updates that were issued as a part of a security advisory increases the system stability.
The operation system or installed application can be successfully bootstrapped
without the GPG key being trusted. However, you cannot install new packages or
update them until the keys are trusted.
Most packages managers implement GPG key signing to verify package integrity
during installation.
To verify GPG keys are configured correctly for your package manager,
one of the following command groups may provide the needed information
depending on the package manager in use.
In SUSE Linux distributions, the administrators have to follow the next steps:
1. Log on to the system as a user with administrator rights.
2. Locate and download package, for example zoom_x86_64.rpm
3. Locate and download the public key (GPG) from the software download site, for
example the key for zoom package is package-signing-key-5-12-6.pub
4. Import the key public key:
$ sudo rpm --import package-signing-key-5-12-6.pub
5. List the keys, for example the command:
$ sudo rpm -qa gpg-pubkey*
will provide:
gpg-pubkey-dd79b481-62fe7502
6. Get more details about the key, via the command:
$ sudo rpm -qa gpg-pubkey-dd79b481-62fe7502
7. Check the GPG key, for example the command:
$ sudo rpm -q gpg-pubkey --qf '%{name}-%{version}-%{release} --> %{summary}\n'
will provide:
gpg-pubkey-dd79b481-62fe7502 --> gpg(Zoom Video Communications, Inc. <CryptoOpsCodeSignProd@zoom.us>)
It is important to ensure that updates are obtained from a valid source to protect against spoofing that could lead to the inadvertent installation of malware on the system.
To ensure the system can cryptographically verify base software packages come from Fedora (and to connect to the Fedora Network to receive them), the Fedora GPG key must properly be installed. To install the Fedora GPG key, run one of the commands below, depending on your Fedora vesion:
$ sudo rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora--primary"
$ sudo rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora--primary"
Changes to software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor. The Fedora GPG key is necessary to cryptographically verify packages are from Fedora."
The gpgcheck option controls whether RPM packages' signatures are always checked prior to installation. To configure yum to check package signatures before installing them, ensure the following line appears in /etc/yum.conf in the [main] section:
gpgcheck=1
Changes to any software components can have significant effects on the
overall security of the operating system. This requirement ensures the
software has not been tampered with and that it has been provided by a
trusted vendor.
Accordingly, patches, service packs, device drivers, or operating system
components must be signed with a certificate recognized and approved by the
organization.
Verifying the authenticity of the software prior to installation
validates the integrity of the patch or upgrade received from a vendor.
This ensures the software has not been tampered with and that it has been
provided by a trusted vendor. Self-signed certificates are disallowed by
this requirement. Certificates used to verify the software must be from an
approved Certificate Authority (CA).
yum should be configured to verify the signature(s) of local packages prior to installation. To configure yum to verify signatures of local packages, set the localpkg_gpgcheck to 1 in /etc/yum.conf.
Changes to any software components can have significant effects to the overall security
of the operating system. This requirement ensures the software has not been tampered and
has been provided by a trusted vendor.
Accordingly, patches, service packs, device drivers, or operating system components must
be signed with a certificate recognized and approved by the organization.
To ensure signature checking is not disabled for any repos, remove any lines from files in /etc/yum.repos.d of the form:
gpgcheck=0
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA)."
Verify the operating system prevents the installation of patches, service packs, device drivers, or operating system components of local packages without verification of the repository metadata. Check that yum verifies the repository metadata prior to install with the following command. This should be configured by setting repo_gpgcheck to 1 in /etc/yum.conf.
Changes to any software components can have significant effects to the overall security of the operating system. This requirement ensures the software has not been tampered and has been provided by a trusted vendor. Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization. Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. The operating system should not have to verify the software again. NOTE: For U.S. Military systems, this requirement does not mandate DoD certificates for this purpose; however, the certificate used to verify the software must be from an approved Certificate Authority.
To ensure the system can cryptographically verify base software packages come from Oracle (and to connect to the Unbreakable Linux Network to receive them), the Oracle GPG key must properly be installed. To install the Oracle GPG key, run:
$ sudo uln_registerIf the system is not connected to the Internet, then install the Oracle GPG key from trusted media such as the Oracle installation CD-ROM or DVD. Assuming the disc is mounted in /media/cdrom, use the following command as the root user to import it into the keyring:
$ sudo rpm --import /media/cdrom/RPM-GPG-KEY-oracleAlternatively, the key may be pre-loaded during the Oracle installation. In such cases, the key can be installed by running the following command:
sudo rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle
Changes to software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor. The Oracle GPG key is necessary to cryptographically verify packages are from Oracle.
Systems need to have package manager repositories configured to ensure they receive the latest patches and updates.
If the system's package repositories are misconfigured important patches may not be identified or a rogue repository could introduce compromised software.
To ensure the system can cryptographically verify base software packages come from Red Hat (and to connect to the Red Hat Network to receive them), the Red Hat GPG key must properly be installed. To install the Red Hat GPG key, run:
$ sudo subscription-manager registerIf the system is not connected to the Internet or an RHN Satellite, then install the Red Hat GPG key from trusted media such as the Red Hat installation CD-ROM or DVD. Assuming the disc is mounted in /media/cdrom, use the following command as the root user to import it into the keyring:
$ sudo rpm --import /media/cdrom/RPM-GPG-KEYAlternatively, the key may be pre-loaded during the RHEL installation. In such cases, the key can be installed by running the following command:
sudo rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
Changes to software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor. The Red Hat GPG key is necessary to cryptographically verify packages are from Red Hat.
To ensure the system can cryptographically verify base software packages come from Amazon (and to connect to the Amazon Network to receive them), the Amazon GPG key must properly be installed. To install the Amazon GPG key, run:
$ sudo rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-amazon-linux-2023
Changes to software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor. The Amazon GPG key is necessary to cryptographically verify packages are from Amazon.
To ensure the system can cryptographically verify base software packages come from SUSE (and to connect to the SUSE to receive them), the SUSE GPG key must properly be installed. To install the SUSE GPG key, run:
$ sudo zypper install suse-build-keyIf the system is not connected to the Internet or an RHN Satellite, then install the SUSE GPG key from trusted media such as the SUSE installation CD-ROM or DVD. Assuming the disc is mounted in /media/cdrom, use the following command as the root user to import it into the keyring:
$ sudo rpm --import /media/cdrom/content.keyor
$ sudo rpm --import /media/cdrom/repodata/repomd.xml.keyAlternatively, the key may be pre-loaded during the SUSE installation. In such cases, one can use the repository cache files to install the key, for example by running the following command:
sudo rpm --import /var/cache/zypp/raw/Basesystem_Module_15_SP2_x86_64:SLE-Module-Basesystem15-SP2-Pool/repodata/repomd.xml.key
Changes to software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor. The SUSE GPG key is necessary to cryptographically verify packages are from SUSE.
The dnf-automatic package can be installed with the following command:
$ sudo yum install dnf-automatic
dnf-automatic is an alternative command line interface (CLI) to dnf upgrade suitable for automatic, regular execution.
The gnome-software package can be installed with the following command:
$ sudo yum install gnome-software
The GNOME software package must be installed so that it can be used for software and firmware updates.
Without cryptographic integrity protections, system executables and files can be altered by unauthorized users without detection. The RPM package management system can check the hashes of installed software packages, including many that are important to system security. To verify that the cryptographic hash of system files and commands matches vendor values, run the following command to list which files on the system have hashes that differ from what is expected by the RPM database:
$ rpm -Va --noconfig | grep '^..5'If the file was not expected to change, investigate the cause of the change using audit logs or other means. The package can then be reinstalled to restore the file. Run the following command to determine which package owns the file:
$ rpm -qf FILENAMEThe package can be reinstalled from a yum repository using the command:
$ sudo yum reinstall PACKAGENAMEAlternatively, the package can be reinstalled from trusted media using the command:
$ sudo rpm -Uvh PACKAGENAME
The hashes of important files like system executables should match the information given by the RPM database. Executables with erroneous hashes could be a sign of nefarious activity on the system.
The RPM package management system can check file ownership permissions of installed software packages, including many that are important to system security. After locating a file with incorrect permissions, which can be found with:
rpm -Va | awk '{ if (substr($0,6,1)=="U" || substr($0,7,1)=="G") print $NF }'
run the following command to determine which package owns it:
$ rpm -qf FILENAMENext, run the following command to reset its permissions to the correct values:
$ sudo rpm --restore PACKAGENAME
Ownership of binaries and configuration files that is incorrect could allow an unauthorized user to gain privileges that they should not have. The ownership set by the vendor should be maintained. Any deviations from this baseline should be investigated.
The RPM package management system can check file access permissions of installed software packages, including many that are important to system security. Verify that the file permissions of system files and commands match vendor values. Check the file permissions with the following command:
$ sudo rpm -Va | awk '{ if (substr($0,2,1)=="M") print $NF }'
Output indicates files that do not match vendor defaults.
After locating a file with incorrect permissions, run the following command to determine which
package owns it:
$ rpm -qf FILENAME
$ sudo rpm --restore PACKAGENAME
Permissions on system binaries and configuration files that are too generous could allow an unauthorized user to gain privileges that they should not have. The permissions set by the vendor should be maintained. Any deviations from this baseline should be investigated.
If the system is joined to the Red Hat Network, a Red Hat Satellite Server, or a yum server, run the following command to install updates:
$ sudo yum updateIf the system is not configured to use one of these sources, updates (in the form of RPM packages) can be manually downloaded from the Red Hat Network and installed using rpm.
Installing software updates is a fundamental mitigation against the exploitation of publicly-known vulnerabilities. If the most recent security patches and updates are not installed, unauthorized users may take advantage of weaknesses in the unpatched software. The lack of prompt attention to patching could result in a system compromise.
The dnf-automatic timer can be enabled with the following command:
$ sudo systemctl enable dnf-automatic.timer
The dnf-automatic is an alternative command line interface (CLI) to dnf upgrade with specific facilities to make it suitable to be executed automatically and regularly from systemd timers, cron jobs and similar. The tool is controlled by dnf-automatic.timer SystemD timer.