Guide to the Secure Configuration of Oracle Linux 7

with profile Unclassified Information in Non-federal Information Systems and Organizations (NIST 800-171)
From NIST 800-171, Section 2.2: Security requirements for protecting the confidentiality of CUI in non-federal information systems and organizations have a well-defined structure that consists of: (i) a basic security requirements section; (ii) a derived security requirements section. The basic security requirements are obtained from FIPS Publication 200, which provides the high-level and fundamental security requirements for federal information and information systems. The derived security requirements, which supplement the basic security requirements, are taken from the security controls in NIST Special Publication 800-53. This profile configures Oracle Linux 7 to the NIST Special Publication 800-53 controls identified for securing Controlled Unclassified Information (CUI).
This guide presents a catalog of security-relevant configuration settings for Oracle Linux 7. It is a rendering of content structured in the eXtensible Configuration Checklist Description Format (XCCDF) in order to support security automation. The SCAP content is is available in the scap-security-guide package which is developed at https://www.open-scap.org/security-policies/scap-security-guide.

Providing system administrators with such guidance informs them how to securely configure systems under their control in a variety of network roles. Policy makers and baseline creators can use this catalog of settings, with its associated references to higher-level security control catalogs, in order to assist them in security baseline creation. This guide is a catalog, not a checklist, and satisfaction of every item is not likely to be possible or sensible in many operational scenarios. However, the XCCDF format enables granular selection and adjustment of settings, and their association with OVAL and OCIL content provides an automated checking capability. Transformations of this document, and its associated automated checking content, are capable of providing baselines that meet a diverse set of policy objectives. Some example XCCDF Profiles, which are selections of items that form checklists and can be used as baselines, are available with this guide. They can be processed, in an automated fashion, with tools that support the Security Content Automation Protocol (SCAP). The DISA STIG, which provides required settings for US Department of Defense systems, is one example of a baseline created from this guidance.
Do not attempt to implement any of the settings in this guide without first testing them in a non-operational environment. The creators of this guidance assume no responsibility whatsoever for its use by other parties, and makes no guarantees, expressed or implied, about its quality, reliability, or any other characteristic.

Profile Information

Profile TitleUnclassified Information in Non-federal Information Systems and Organizations (NIST 800-171)
Profile IDxccdf_org.ssgproject.content_profile_cui

CPE Platforms

  • cpe:/o:oracle:linux:7

Revision History

Current version: 0.1.75

  • draft (as of 2024-11-04)

Table of Contents

  1. System Settings
    1. Installing and Maintaining Software
    2. Account and Access Control
    3. GRUB2 bootloader configuration
    4. Network Configuration and Firewalls
    5. File Permissions and Masks
    6. SELinux
  2. Services
    1. Base Services
    2. NFS and RPC
    3. SSH Server
  3. System Accounting with auditd
    1. Configure auditd Data Retention
    2. System Accounting with auditd

Checklist

Group   Guide to the Secure Configuration of Oracle Linux 7   Group contains 51 groups and 104 rules
Group   System Settings   Group contains 40 groups and 84 rules
[ref]   Contains rules that check correct system settings.
Group   Installing and Maintaining Software   Group contains 3 groups and 6 rules
[ref]   The following sections contain information on security-relevant choices during the initial operating system installation process and the setup of software updates.
Group   System and Software Integrity   Group contains 1 group and 2 rules
[ref]   System and software integrity can be gained by installing antivirus, increasing system encryption strength with FIPS, verifying installed software, enabling SELinux, installing an Intrusion Prevention System, etc. However, installing or enabling integrity checking tools cannot prevent intrusions, but they can detect that an intrusion may have occurred. Requirements for integrity checking may be highly dependent on the environment in which the system will be used. Snapshot-based approaches such as AIDE may induce considerable overhead in the presence of frequent software updates.
Group   Federal Information Processing Standard (FIPS)   Group contains 2 rules
[ref]   The Federal Information Processing Standard (FIPS) is a computer security standard which is developed by the U.S. Government and industry working groups to validate the quality of cryptographic modules. The FIPS standard provides four security levels to ensure adequate coverage of different industries, implementation of cryptographic modules, and organizational sizes and requirements.

FIPS 140-2 is the current standard for validating that mechanisms used to access cryptographic modules utilize authentication that meets industry and government requirements. For government systems, this allows Security Levels 1, 2, 3, or 4 for use on Oracle Linux 7.

See http://csrc.nist.gov/publications/PubsFIPS.html for more information.

Rule   Install the dracut-fips Package   [ref]

To enable FIPS, the system requires that the dracut-fips package be installed. The dracut-fips package can be installed with the following command:
$ sudo yum install dracut-fips
Warning:  System Crypto Modules must be provided by a vendor that undergoes FIPS-140 certifications. FIPS-140 is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf To meet this, the system has to have cryptographic software provided by a vendor that has undergone this certification. This means providing documentation, test results, design information, and independent third party review by an accredited lab. While open source software is capable of meeting this, it does not meet FIPS-140 unless the vendor submits to this process.
Rationale:
Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data. The operating system must implement cryptographic modules adhering to the higher standards approved by the federal government since this provides assurance they have been tested and validated.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_dracut-fips_installed
References:
cis-csc12, 15, 8
cjis5.10.1.2
cobit5APO13.01, DSS01.04, DSS05.02, DSS05.03
cui3.13.11, 3.13.8
disaCCI-000068, CCI-000803, CCI-002450
isa-62443-20094.3.3.6.6
isa-62443-2013SR 1.13, SR 2.6, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
iso27001-2013A.11.2.6, A.13.1.1, A.13.2.1, A.14.1.3, A.6.2.1, A.6.2.2
nerc-cipCIP-003-8 R4.2, CIP-007-3 R5.1
nistSC-12(2), SC-12(3), IA-7, SC-13, CM-6(a), SC-12
nist-csfPR.AC-3, PR.PT-4
os-srgSRG-OS-000033-GPOS-00014, SRG-OS-000396-GPOS-00176, SRG-OS-000478-GPOS-00223

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include install_dracut-fips

class install_dracut-fips {
  package { 'dracut-fips':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.10.1.2
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_dracut-fips_installed

- name: Ensure dracut-fips is installed
  package:
    name: dracut-fips
    state: present
  when: ( not ( lookup("env", "container") == "bwrap-osbuild" ) and "kernel" in ansible_facts.packages
    )
  tags:
  - CJIS-5.10.1.2
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_dracut-fips_installed


[[packages]]
name = "dracut-fips"
version = "*"

Complexity:low
Disruption:low
Reboot:false
Strategy:enable

package --add=dracut-fips

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if ( ! ( [ "${container:-}" == "bwrap-osbuild" ] ) && rpm --quiet -q kernel ); then

if ! rpm -q --quiet "dracut-fips" ; then
    yum install -y "dracut-fips"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable FIPS Mode in GRUB2   [ref]

To ensure FIPS mode is enabled, install package dracut-fips, and rebuild initramfs by running the following commands:
$ sudo yum install dracut-fips
dracut -f
After the dracut command has been run, add the argument fips=1 to the default GRUB 2 command line for the Linux operating system in /etc/default/grub, in the manner below:
GRUB_CMDLINE_LINUX="crashkernel=auto rd.lvm.lv=VolGroup/LogVol06 rd.lvm.lv=VolGroup/lv_swap rhgb quiet rd.shell=0 fips=1"
Finally, rebuild the grub.cfg file by using the
grub2-mkconfig -o
command as follows:
  • On BIOS-based machines, issue the following command as root:
    ~]# grub2-mkconfig -o /boot/grub2/grub.cfg
  • On UEFI-based machines, issue the following command as root:
    ~]# grub2-mkconfig -o /boot/efi/EFI/redhat/grub.cfg
Warning:  Running
dracut -f
will overwrite the existing initramfs file.
Warning:  The system needs to be rebooted for these changes to take effect.
Warning:  System Crypto Modules must be provided by a vendor that undergoes FIPS-140 certifications. FIPS-140 is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf To meet this, the system has to have cryptographic software provided by a vendor that has undergone this certification. This means providing documentation, test results, design information, and independent third party review by an accredited lab. While open source software is capable of meeting this, it does not meet FIPS-140 unless the vendor submits to this process.
Rationale:
Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data. The operating system must implement cryptographic modules adhering to the higher standards approved by the federal government since this provides assurance they have been tested and validated.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_grub2_enable_fips_mode
References:
cis-csc12, 15, 8
cjis5.10.1.2
cobit5APO13.01, DSS01.04, DSS05.02, DSS05.03
cui3.13.8, 3.13.11
disaCCI-000068, CCI-000803, CCI-001199, CCI-002450, CCI-002476
isa-62443-20094.3.3.6.6
isa-62443-2013SR 1.13, SR 2.6, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
iso27001-2013A.11.2.6, A.13.1.1, A.13.2.1, A.14.1.3, A.6.2.1, A.6.2.2
nerc-cipCIP-003-8 R4.2, CIP-007-3 R5.1
nistSC-12(2), SC-12(3), IA-7, SC-13, CM-6(a), SC-12
nist-csfPR.AC-3, PR.PT-4
os-srgSRG-OS-000033-GPOS-00014, SRG-OS-000185-GPOS-00079, SRG-OS-000396-GPOS-00176, SRG-OS-000405-GPOS-00184, SRG-OS-000478-GPOS-00223
stigidOL07-00-021350
stigrefSV-221758r958408_rule

Complexity:high
Disruption:medium
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.10.1.2
  - DISA-STIG-OL07-00-021350
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - grub2_enable_fips_mode
  - high_complexity
  - high_severity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Check prelink binary installed
  stat:
    path: /usr/sbin/prelink
  register: prelink_exists
  when:
  - ( not ( lookup("env", "container") == "bwrap-osbuild" ) and "kernel" in ansible_facts.packages
    )
  - '"grub2-common" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.2
  - DISA-STIG-OL07-00-021350
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - grub2_enable_fips_mode
  - high_complexity
  - high_severity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Disable prelink
  lineinfile:
    dest: /etc/sysconfig/prelink
    regexp: ^#?PRELINKING
    line: PRELINKING=no
  when:
  - ( not ( lookup("env", "container") == "bwrap-osbuild" ) and "kernel" in ansible_facts.packages
    )
  - '"grub2-common" in ansible_facts.packages'
  - prelink_exists.stat.exists
  tags:
  - CJIS-5.10.1.2
  - DISA-STIG-OL07-00-021350
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - grub2_enable_fips_mode
  - high_complexity
  - high_severity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Revert prelinking binaries
  command: /usr/sbin/prelink -ua
  when:
  - ( not ( lookup("env", "container") == "bwrap-osbuild" ) and "kernel" in ansible_facts.packages
    )
  - '"grub2-common" in ansible_facts.packages'
  - prelink_exists.stat.exists
  tags:
  - CJIS-5.10.1.2
  - DISA-STIG-OL07-00-021350
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - grub2_enable_fips_mode
  - high_complexity
  - high_severity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Check if system supports AES-NI
  command: grep -q -m1 -o aes /proc/cpuinfo
  failed_when: aesni_supported.rc > 1
  register: aesni_supported
  check_mode: false
  when:
  - ( not ( lookup("env", "container") == "bwrap-osbuild" ) and "kernel" in ansible_facts.packages
    )
  - '"grub2-common" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.2
  - DISA-STIG-OL07-00-021350
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - grub2_enable_fips_mode
  - high_complexity
  - high_severity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Ensure dracut-fips-aesni is installed
  package:
    name: dracut-fips-aesni
    state: present
  when:
  - ( not ( lookup("env", "container") == "bwrap-osbuild" ) and "kernel" in ansible_facts.packages
    )
  - '"grub2-common" in ansible_facts.packages'
  - aesni_supported.rc == 0
  tags:
  - CJIS-5.10.1.2
  - DISA-STIG-OL07-00-021350
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - grub2_enable_fips_mode
  - high_complexity
  - high_severity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Install dracut-fips
  package:
    name: dracut-fips
    state: present
  when:
  - ( not ( lookup("env", "container") == "bwrap-osbuild" ) and "kernel" in ansible_facts.packages
    )
  - '"grub2-common" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.2
  - DISA-STIG-OL07-00-021350
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - grub2_enable_fips_mode
  - high_complexity
  - high_severity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Rebuild initramfs
  command: dracut -f
  when:
  - ( not ( lookup("env", "container") == "bwrap-osbuild" ) and "kernel" in ansible_facts.packages
    )
  - '"grub2-common" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.2
  - DISA-STIG-OL07-00-021350
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - grub2_enable_fips_mode
  - high_complexity
  - high_severity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Check fips argument exists
  command: grep 'GRUB_CMDLINE_LINUX.*fips=' /etc/default/grub
  failed_when: false
  register: fipsargcheck
  check_mode: false
  when:
  - ( not ( lookup("env", "container") == "bwrap-osbuild" ) and "kernel" in ansible_facts.packages
    )
  - '"grub2-common" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.2
  - DISA-STIG-OL07-00-021350
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - grub2_enable_fips_mode
  - high_complexity
  - high_severity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Replace existing fips argument
  replace:
    path: /etc/default/grub
    regexp: fips=.
    replace: fips=1
  when:
  - ( not ( lookup("env", "container") == "bwrap-osbuild" ) and "kernel" in ansible_facts.packages
    )
  - '"grub2-common" in ansible_facts.packages'
  - fipsargcheck.rc == 0
  tags:
  - CJIS-5.10.1.2
  - DISA-STIG-OL07-00-021350
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - grub2_enable_fips_mode
  - high_complexity
  - high_severity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Add fips argument
  replace:
    path: /etc/default/grub
    regexp: (GRUB_CMDLINE_LINUX=.*)"
    replace: \1 fips=1"
  when:
  - ( not ( lookup("env", "container") == "bwrap-osbuild" ) and "kernel" in ansible_facts.packages
    )
  - '"grub2-common" in ansible_facts.packages'
  - fipsargcheck.rc != 0
  tags:
  - CJIS-5.10.1.2
  - DISA-STIG-OL07-00-021350
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - grub2_enable_fips_mode
  - high_complexity
  - high_severity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Get boot device uuid
  command: findmnt --noheadings --output uuid --target /boot
  register: bootuuid
  check_mode: false
  when:
  - ( not ( lookup("env", "container") == "bwrap-osbuild" ) and "kernel" in ansible_facts.packages
    )
  - '"grub2-common" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.2
  - DISA-STIG-OL07-00-021350
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - grub2_enable_fips_mode
  - high_complexity
  - high_severity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Check boot argument exists
  command: grep 'GRUB_CMDLINE_LINUX.*boot=' /etc/default/grub
  failed_when: false
  register: bootargcheck
  check_mode: false
  when:
  - ( not ( lookup("env", "container") == "bwrap-osbuild" ) and "kernel" in ansible_facts.packages
    )
  - '"grub2-common" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.2
  - DISA-STIG-OL07-00-021350
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - grub2_enable_fips_mode
  - high_complexity
  - high_severity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Replace existing boot argument
  replace:
    path: /etc/default/grub
    regexp: boot=\w*-\w*-\w*-\w*-\w*
    replace: boot={{ bootuuid.stdout }}
  when:
  - ( not ( lookup("env", "container") == "bwrap-osbuild" ) and "kernel" in ansible_facts.packages
    )
  - '"grub2-common" in ansible_facts.packages'
  - bootargcheck.rc == 0
  tags:
  - CJIS-5.10.1.2
  - DISA-STIG-OL07-00-021350
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - grub2_enable_fips_mode
  - high_complexity
  - high_severity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Add boot argument
  replace:
    path: /etc/default/grub
    regexp: (GRUB_CMDLINE_LINUX=.*)"
    replace: \1 boot=UUID={{ bootuuid.stdout }}"
  when:
  - ( not ( lookup("env", "container") == "bwrap-osbuild" ) and "kernel" in ansible_facts.packages
    )
  - '"grub2-common" in ansible_facts.packages'
  - bootargcheck.rc != 0
  tags:
  - CJIS-5.10.1.2
  - DISA-STIG-OL07-00-021350
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - grub2_enable_fips_mode
  - high_complexity
  - high_severity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Update bootloader menu
  command: /sbin/grubby --update-kernel=ALL --args="fips=1 boot=UUID={{ bootuuid.stdout
    }}"
  when:
  - ( not ( lookup("env", "container") == "bwrap-osbuild" ) and "kernel" in ansible_facts.packages
    )
  - '"grub2-common" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.2
  - DISA-STIG-OL07-00-021350
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - grub2_enable_fips_mode
  - high_complexity
  - high_severity
  - medium_disruption
  - reboot_required
  - restrict_strategy


package --add=dracut-fips --add=dracut-fips-aesni

# Remediation is applicable only in certain platforms
if ( ! ( [ "${container:-}" == "bwrap-osbuild" ] ) && rpm --quiet -q kernel ) && { rpm --quiet -q grub2-common; }; then

# prelink not installed
if test -e /etc/sysconfig/prelink -o -e /usr/sbin/prelink; then
    if grep -q ^PRELINKING /etc/sysconfig/prelink
    then
        sed -i 's/^PRELINKING[:blank:]*=[:blank:]*[:alpha:]*/PRELINKING=no/' /etc/sysconfig/prelink
    else
        printf '\n' >> /etc/sysconfig/prelink
        printf '%s\n' '# Set PRELINKING=no per security requirements' 'PRELINKING=no' >> /etc/sysconfig/prelink
    fi

    # Undo previous prelink changes to binaries if prelink is available.
    if test -x /usr/sbin/prelink; then
        /usr/sbin/prelink -ua
    fi
fi

if grep -q -m1 -o aes /proc/cpuinfo; then
	if ! rpm -q --quiet "dracut-fips-aesni" ; then
    yum install -y "dracut-fips-aesni"
fi
fi
if ! rpm -q --quiet "dracut-fips" ; then
    yum install -y "dracut-fips"
fi

dracut -f

# Correct the form of default kernel command line in  grub
if grep -q '^GRUB_CMDLINE_LINUX=.*fips=.*"'  /etc/default/grub; then
	# modify the GRUB command-line if a fips= arg already exists
	sed -i 's/\(^GRUB_CMDLINE_LINUX=".*\)fips=[^[:space:]]*\(.*"\)/\1 fips=1 \2/'  /etc/default/grub
else
	# no existing fips=arg is present, append it
	sed -i 's/\(^GRUB_CMDLINE_LINUX=".*\)"/\1 fips=1"/'  /etc/default/grub
fi

# Get the UUID of the device mounted at root (/).
ROOT_UUID=$(findmnt --noheadings --output uuid --target /)

# Get the UUID of the device mounted at /boot.
BOOT_UUID=$(findmnt --noheadings --output uuid --target /boot)

if [ "${ROOT_UUID}" == "${BOOT_UUID}" ]; then
	# root UUID same as boot UUID, so do not modify the GRUB command-line or add boot arg to kernel command line
	# Correct the form of kernel command line for each installed kernel in the bootloader
	/sbin/grubby --update-kernel=ALL --args="fips=1"
else
	# root UUID different from boot UUID, so modify the GRUB command-line and add boot arg to kernel command line
	if grep -q '^GRUB_CMDLINE_LINUX=".*boot=.*"'  /etc/default/grub; then
		# modify the GRUB command-line if a boot= arg already exists
		sed -i 's/\(^GRUB_CMDLINE_LINUX=".*\)boot=[^[:space:]]*\(.*"\)/\1 boot=UUID='"${BOOT_UUID} \2/" /etc/default/grub
	else
		# no existing boot=arg is present, append it
		sed -i 's/\(^GRUB_CMDLINE_LINUX=".*\)"/\1 boot=UUID='${BOOT_UUID}'"/'  /etc/default/grub
	fi
	# Correct the form of kernel command line for each installed kernel in the bootloader
	/sbin/grubby --update-kernel=ALL --args="fips=1 boot=UUID=${BOOT_UUID}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Updating Software   Group contains 4 rules
[ref]   The yum command line tool is used to install and update software packages. The system also provides a graphical software update tool in the System menu, in the Administration submenu, called Software Update.

Oracle Linux 7 systems contain an installed software catalog called the RPM database, which records metadata of installed packages. Consistently using yum or the graphical Software Update for all software installation allows for insight into the current inventory of installed software on the system.

Rule   Ensure gpgcheck Enabled In Main yum Configuration   [ref]

The gpgcheck option controls whether RPM packages' signatures are always checked prior to installation. To configure yum to check package signatures before installing them, ensure the following line appears in /etc/yum.conf in the [main] section:
gpgcheck=1
Rationale:
Changes to any software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor.
Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA).
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_gpgcheck_globally_activated
References:
cis-csc11, 2, 3, 9
cjis5.10.4.1
cobit5APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02
cui3.4.8
disaCCI-003992
hipaa164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i)
isa-62443-20094.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6
iso27001-2013A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4
nistCM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), SA-12, SA-12(10), CM-11(a), CM-11(b)
nist-csfPR.DS-6, PR.DS-8, PR.IP-1
osppFPT_TUD_EXT.1, FPT_TUD_EXT.2
pcidssReq-6.2
os-srgSRG-OS-000366-GPOS-00153
stigidOL07-00-020050
anssiR59
pcidss46.3.3, 6.3
stigrefSV-221710r1015187_rule

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.10.4.1
  - DISA-STIG-OL07-00-020050
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3
  - PCI-DSSv4-6.3.3
  - configure_strategy
  - ensure_gpgcheck_globally_activated
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed

- name: Ensure GPG check is globally activated
  ini_file:
    dest: /etc/yum.conf
    section: main
    option: gpgcheck
    value: 1
    no_extra_spaces: true
    create: false
  when: '"yum" in ansible_facts.packages'
  tags:
  - CJIS-5.10.4.1
  - DISA-STIG-OL07-00-020050
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3
  - PCI-DSSv4-6.3.3
  - configure_strategy
  - ensure_gpgcheck_globally_activated
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed

# Remediation is applicable only in certain platforms
if rpm --quiet -q yum; then

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^gpgcheck")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^gpgcheck\\>" "/etc/yum.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^gpgcheck\\>.*/$escaped_formatted_output/gi" "/etc/yum.conf"
else
    if [[ -s "/etc/yum.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/yum.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/yum.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/yum.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure gpgcheck Enabled for Local Packages   [ref]

yum should be configured to verify the signature(s) of local packages prior to installation. To configure yum to verify signatures of local packages, set the localpkg_gpgcheck to 1 in /etc/yum.conf.
Rationale:
Changes to any software components can have significant effects to the overall security of the operating system. This requirement ensures the software has not been tampered and has been provided by a trusted vendor.

Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_gpgcheck_local_packages
References:
cis-csc11, 3, 9
cobit5BAI10.01, BAI10.02, BAI10.03, BAI10.05
cui3.4.8
disaCCI-003992
hipaa164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i)
isa-62443-20094.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 7.6
iso27001-2013A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4
nistCM-11(a), CM-11(b), CM-6(a), CM-5(3), SA-12, SA-12(10)
nist-csfPR.IP-1
osppFPT_TUD_EXT.1, FPT_TUD_EXT.2
os-srgSRG-OS-000366-GPOS-00153
stigidOL07-00-020060
anssiR59
stigrefSV-221711r1015188_rule

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-OL07-00-020060
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - ensure_gpgcheck_local_packages
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed
  - unknown_strategy

- name: Ensure GPG check Enabled for Local Packages (yum)
  block:

  - name: Check stats of yum
    stat:
      path: /etc/yum.conf
    register: pkg

  - name: Check if config file of yum is a symlink
    ansible.builtin.set_fact:
      pkg_config_file_symlink: '{{ pkg.stat.lnk_target if pkg.stat.lnk_target is match("^/.*")
        else "/etc/yum.conf" | dirname ~ "/" ~ pkg.stat.lnk_target }}'
    when: pkg.stat.lnk_target is defined

  - name: Ensure GPG check Enabled for Local Packages (yum)
    ini_file:
      dest: '{{ pkg_config_file_symlink |  default("/etc/yum.conf") }}'
      section: main
      option: localpkg_gpgcheck
      value: 1
      no_extra_spaces: true
      create: true
  when: '"yum" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-020060
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - ensure_gpgcheck_local_packages
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed
  - unknown_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q yum; then

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^localpkg_gpgcheck")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^localpkg_gpgcheck\\>" "/etc/yum.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^localpkg_gpgcheck\\>.*/$escaped_formatted_output/gi" "/etc/yum.conf"
else
    if [[ -s "/etc/yum.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/yum.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/yum.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/yum.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure gpgcheck Enabled for All yum Package Repositories   [ref]

To ensure signature checking is not disabled for any repos, remove any lines from files in /etc/yum.repos.d of the form:
gpgcheck=0
Rationale:
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA)."
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_gpgcheck_never_disabled
References:
cis-csc11, 2, 3, 9
cjis5.10.4.1
cobit5APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02
cui3.4.8
disaCCI-003992
hipaa164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i)
isa-62443-20094.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6
iso27001-2013A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4
nistCM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), SA-12, SA-12(10), CM-11(a), CM-11(b)
nist-csfPR.DS-6, PR.DS-8, PR.IP-1
osppFPT_TUD_EXT.1, FPT_TUD_EXT.2
pcidssReq-6.2
os-srgSRG-OS-000366-GPOS-00153
anssiR59
pcidss46.3.3, 6.3

Complexity:low
Disruption:medium
Reboot:false
Strategy:enable
- name: Grep for yum repo section names
  shell: |
    set -o pipefail
    grep -HEr '^\[.+\]' -r /etc/yum.repos.d/
  register: repo_grep_results
  failed_when: repo_grep_results.rc not in [0, 1]
  changed_when: false
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3
  - PCI-DSSv4-6.3.3
  - enable_strategy
  - ensure_gpgcheck_never_disabled
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed

- name: Set gpgcheck=1 for each yum repo
  ini_file:
    path: '{{ item[0] }}'
    section: '{{ item[1] }}'
    option: gpgcheck
    value: '1'
    no_extra_spaces: true
  loop: '{{ repo_grep_results.stdout |regex_findall( ''(.+\.repo):\[(.+)\]\n?'' )
    if repo_grep_results is not skipped else [] }}'
  when: repo_grep_results is not skipped
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3
  - PCI-DSSv4-6.3.3
  - enable_strategy
  - ensure_gpgcheck_never_disabled
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed


sed -i 's/gpgcheck\s*=.*/gpgcheck=1/g' /etc/yum.repos.d/*

Rule   Ensure Oracle Linux GPG Key Installed   [ref]

To ensure the system can cryptographically verify base software packages come from Oracle (and to connect to the Unbreakable Linux Network to receive them), the Oracle GPG key must properly be installed. To install the Oracle GPG key, run:
$ sudo uln_register
If the system is not connected to the Internet, then install the Oracle GPG key from trusted media such as the Oracle installation CD-ROM or DVD. Assuming the disc is mounted in /media/cdrom, use the following command as the root user to import it into the keyring:
$ sudo rpm --import /media/cdrom/RPM-GPG-KEY-oracle
Alternatively, the key may be pre-loaded during the Oracle installation. In such cases, the key can be installed by running the following command:
sudo rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle
Rationale:
Changes to software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor. The Oracle GPG key is necessary to cryptographically verify packages are from Oracle.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_oracle_gpgkey_installed
References:
cis-csc11, 2, 3, 9
cobit5APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02
disaCCI-001749
isa-62443-20094.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6
iso27001-2013A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4
nistCM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), CM-11(a), CM-11(b)
nist-csfPR.DS-6, PR.DS-8, PR.IP-1
pcidssReq-6.2
stigidOL07-00-010019
cis1.2.2
anssiR59
stigrefSV-256975r1015198_rule

Complexity:medium
Disruption:medium
Reboot:false
Strategy:restrict
- name: Ensure Oracle Linux GPG Key Installed - Read GPG key directory permission
  ansible.builtin.stat:
    path: /etc/pki/rpm-gpg/
  register: gpg_key_directory_permission
  check_mode: false
  tags:
  - DISA-STIG-OL07-00-010019
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - ensure_oracle_gpgkey_installed
  - high_severity
  - medium_complexity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy

- name: Ensure Oracle Linux GPG Key Installed - Retrieve GPG key fingerprints information
  ansible.builtin.command: gpg --with-fingerprint --with-colons "/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle"
  changed_when: false
  register: gpg_fingerprints
  check_mode: false
  tags:
  - DISA-STIG-OL07-00-010019
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - ensure_oracle_gpgkey_installed
  - high_severity
  - medium_complexity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy

- name: Ensure Oracle Linux GPG Key Installed - Set fact for installed fingerprints
  ansible.builtin.set_fact:
    gpg_installed_fingerprints: |-
      {{ gpg_fingerprints.stdout | regex_findall('^pub.*
      (?:^fpr[:]*)([0-9A-Fa-f]*)', '\1') | list }}
  tags:
  - DISA-STIG-OL07-00-010019
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - ensure_oracle_gpgkey_installed
  - high_severity
  - medium_complexity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy

- name: Ensure Oracle Linux GPG Key Installed - Set fact for valid fingerprints
  ansible.builtin.set_fact:
    gpg_valid_fingerprints:
    - 42144123FECFC55B9086313D72F97B74EC551F03
    - ''
  tags:
  - DISA-STIG-OL07-00-010019
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - ensure_oracle_gpgkey_installed
  - high_severity
  - medium_complexity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy

- name: Ensure Oracle Linux GPG Key Installed - Import Oracle GPG key securely
  ansible.builtin.rpm_key:
    state: present
    key: /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle
  when:
  - gpg_key_directory_permission.stat.mode <= '0755'
  - (gpg_installed_fingerprints | difference(gpg_valid_fingerprints)) | length ==
    0
  - gpg_installed_fingerprints | length > 0
  tags:
  - DISA-STIG-OL07-00-010019
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - ensure_oracle_gpgkey_installed
  - high_severity
  - medium_complexity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy

# OL fingerprints below retrieved from: https://linux.oracle.com/security/gpg/#gpg
readonly OL_RELEASE_FINGERPRINT="42144123FECFC55B9086313D72F97B74EC551F03"
readonly OL_AUXILIARY_FINGERPRINT=""

FINGERPRINTS_REGEX="${OL_RELEASE_FINGERPRINT}"

if [[ -n "$OL_AUXILIARY_FINGERPRINT" ]]; then
    FINGERPRINTS_REGEX+="|${OL_AUXILIARY_FINGERPRINT}"
fi

# Location of the key we would like to import (once it's integrity verified)
readonly OL_RELEASE_KEY="/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle"

RPM_GPG_DIR_PERMS=$(stat -c %a "$(dirname "$OL_RELEASE_KEY")")

# Verify /etc/pki/rpm-gpg directory permissions are safe
if [ "${RPM_GPG_DIR_PERMS}" -le "755" ]
then
  # If they are safe, try to obtain fingerprints from the key file
  # (to ensure there won't be e.g. CRC error)
  
    readarray -t GPG_OUT < <(gpg --with-fingerprint --with-colons "$OL_RELEASE_KEY" | grep "^fpr" | cut -d ":" -f 10)
  

  GPG_RESULT=$?
  # No CRC error, safe to proceed
  if [ "${GPG_RESULT}" -eq "0" ]
  then
    # Filter just hexadecimal fingerprints from gpg's output from
    # processing of a key file
    echo "${GPG_OUT[*]}" | grep -vE "$FINGERPRINTS_REGEX" || {
      # If $ OL_RELEASE_KEY file doesn't contain any keys with unknown fingerprint, import it
      rpm --import "${OL_RELEASE_KEY}"
    }
  fi
fi
Group   Account and Access Control   Group contains 13 groups and 25 rules
[ref]   In traditional Unix security, if an attacker gains shell access to a certain login account, they can perform any action or access any file to which that account has access. Therefore, making it more difficult for unauthorized people to gain shell access to accounts, particularly to privileged accounts, is a necessary part of securing a system. This section introduces mechanisms for restricting access to accounts under Oracle Linux 7.
Group   Protect Accounts by Configuring PAM   Group contains 3 groups and 12 rules
[ref]   PAM, or Pluggable Authentication Modules, is a system which implements modular authentication for Linux programs. PAM provides a flexible and configurable architecture for authentication, and it should be configured to minimize exposure to unnecessary risk. This section contains guidance on how to accomplish that.

PAM is implemented as a set of shared objects which are loaded and invoked whenever an application wishes to authenticate a user. Typically, the application must be running as root in order to take advantage of PAM, because PAM's modules often need to be able to access sensitive stores of account information, such as /etc/shadow. Traditional privileged network listeners (e.g. sshd) or SUID programs (e.g. sudo) already meet this requirement. An SUID root application, userhelper, is provided so that programs which are not SUID or privileged themselves can still take advantage of PAM.

PAM looks in the directory /etc/pam.d for application-specific configuration information. For instance, if the program login attempts to authenticate a user, then PAM's libraries follow the instructions in the file /etc/pam.d/login to determine what actions should be taken.

One very important file in /etc/pam.d is /etc/pam.d/system-auth. This file, which is included by many other PAM configuration files, defines 'default' system authentication measures. Modifying this file is a good way to make far-reaching authentication changes, for instance when implementing a centralized authentication service.
Warning:  Be careful when making changes to PAM's configuration files. The syntax for these files is complex, and modifications can have unexpected consequences. The default configurations shipped with applications should be sufficient for most users.
Warning:  Running authconfig or system-config-authentication will re-write the PAM configuration files, destroying any manually made changes and replacing them with a series of system defaults. One reference to the configuration file syntax can be found at https://fossies.org/linux/Linux-PAM-docs/doc/sag/Linux-PAM_SAG.pdf.
Group   Set Lockouts for Failed Password Attempts   Group contains 4 rules
[ref]   The pam_faillock PAM module provides the capability to lock out user accounts after a number of failed login attempts. Its documentation is available in /usr/share/doc/pam-VERSION/txts/README.pam_faillock.

Warning:  Locking out user accounts presents the risk of a denial-of-service attack. The lockout policy must weigh whether the risk of such a denial-of-service attack outweighs the benefits of thwarting password guessing attacks.

Rule   Limit Password Reuse   [ref]

Do not allow users to reuse recent passwords. This can be accomplished by using the remember option for the pam_unix or pam_pwhistory PAM modules.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report.
Warning:  Newer versions of authselect contain an authselect feature to easily and properly enable pam_pwhistory.so module. If this feature is not yet available in your system, an authselect custom profile must be used to avoid integrity issues in PAM files.
Rationale:
Preventing re-use of previous passwords helps ensure that a compromised password is not re-used by a user.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_remember
References:
cis-csc1, 12, 15, 16, 5
cjis5.6.2.1.1
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui3.5.8
disaCCI-000200
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(f), IA-5(1)(e)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
pcidssReq-8.2.5
os-srgSRG-OS-000077-GPOS-00045
anssiR31
pcidss48.3.7, 8.3

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
- name: XCCDF Value var_password_pam_unix_remember # promote to variable
  set_fact:
    var_password_pam_unix_remember: !!str 5
  tags:
    - always

- name: Limit Password Reuse - Check if system relies on authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Limit Password Reuse - Collect the available authselect features
  ansible.builtin.command:
    cmd: authselect list-features sssd
  register: result_authselect_available_features
  changed_when: false
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Limit Password Reuse - Enable pam_pwhistory.so using authselect feature
  block:

  - name: Limit Password Reuse - Check integrity of authselect current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Limit Password Reuse - Informative message based on the authselect integrity
      check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Limit Password Reuse - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Limit Password Reuse - Ensure "with-pwhistory" feature is enabled using
      authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-pwhistory
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-pwhistory")

  - name: Limit Password Reuse - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  - result_authselect_available_features.stdout is search("with-pwhistory")
  tags:
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Limit Password Reuse - Enable pam_pwhistory.so in appropriate PAM files
  block:

  - name: Limit Password Reuse - Define the PAM file to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: Limit Password Reuse - Check if system relies on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Limit Password Reuse - Ensure authselect custom profile is used if authselect
      is present
    block:

    - name: Limit Password Reuse - Check integrity of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Limit Password Reuse - Informative message based on the authselect integrity
        check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Limit Password Reuse - Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Limit Password Reuse - Define the current authselect profile as a local
        fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Limit Password Reuse - Define the new authselect custom profile as a local
        fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Limit Password Reuse - Get authselect current features to also enable
        them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Limit Password Reuse - Check if any custom profile with the same name
        was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Limit Password Reuse - Create an authselect custom profile based on the
        current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Limit Password Reuse - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Limit Password Reuse - Ensure the authselect custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Limit Password Reuse - Restore the authselect features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Limit Password Reuse - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Limit Password Reuse - Change the PAM file to be edited according to the
        custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Limit Password Reuse - Define a fact for control already filtered in case
      filters are used
    ansible.builtin.set_fact:
      pam_module_control: requisite

  - name: Limit Password Reuse - Check if expected PAM module line is present in {{
      pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ pam_module_control | regex_escape() }}\s+pam_pwhistory.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: Limit Password Reuse - Include or update the PAM module line in {{ pam_file_path
      }}
    block:

    - name: Limit Password Reuse - Check if required PAM module line is present in
        {{ pam_file_path }} with different control
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: Limit Password Reuse - Ensure the correct control for the required PAM
        module line in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
        replace: \1{{ pam_module_control }} \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: Limit Password Reuse - Ensure the required PAM module line is included
        in {{ pam_file_path }}
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        insertafter: ^password.*requisite.*pam_pwquality\.so
        line: password    {{ pam_module_control }}    pam_pwhistory.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: Limit Password Reuse - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - |
    (result_authselect_available_features.stdout is defined and result_authselect_available_features.stdout is not search("with-pwhistory")) or result_authselect_available_features is not defined
  tags:
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Limit Password Reuse - Check the presence of /etc/security/pwhistory.conf
    file
  ansible.builtin.stat:
    path: /etc/security/pwhistory.conf
  register: result_pwhistory_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Limit Password Reuse - pam_pwhistory.so parameters are configured in /etc/security/pwhistory.conf
    file
  block:

  - name: Limit Password Reuse - Ensure the pam_pwhistory.so remember parameter in
      /etc/security/pwhistory.conf
    ansible.builtin.lineinfile:
      path: /etc/security/pwhistory.conf
      regexp: ^\s*remember\s*=
      line: remember = {{ var_password_pam_unix_remember }}
      state: present

  - name: Limit Password Reuse - Ensure the pam_pwhistory.so remember parameter is
      removed from PAM files
    block:

    - name: Limit Password Reuse - Check if /etc/pam.d/system-auth file is present
      ansible.builtin.stat:
        path: /etc/pam.d/system-auth
      register: result_pam_file_present

    - name: Limit Password Reuse - Check the proper remediation for the system
      block:

      - name: Limit Password Reuse - Define the PAM file to be edited as a local fact
        ansible.builtin.set_fact:
          pam_file_path: /etc/pam.d/system-auth

      - name: Limit Password Reuse - Check if system relies on authselect tool
        ansible.builtin.stat:
          path: /usr/bin/authselect
        register: result_authselect_present

      - name: Limit Password Reuse - Ensure authselect custom profile is used if authselect
          is present
        block:

        - name: Limit Password Reuse - Check integrity of authselect current profile
          ansible.builtin.command:
            cmd: authselect check
          register: result_authselect_check_cmd
          changed_when: false
          failed_when: false

        - name: Limit Password Reuse - Informative message based on the authselect
            integrity check result
          ansible.builtin.assert:
            that:
            - result_authselect_check_cmd.rc == 0
            fail_msg:
            - authselect integrity check failed. Remediation aborted!
            - This remediation could not be applied because an authselect profile
              was not selected or the selected profile is not intact.
            - It is not recommended to manually edit the PAM files when authselect
              tool is available.
            - In cases where the default authselect profile does not cover a specific
              demand, a custom authselect profile is recommended.
            success_msg:
            - authselect integrity check passed

        - name: Limit Password Reuse - Get authselect current profile
          ansible.builtin.shell:
            cmd: authselect current -r | awk '{ print $1 }'
          register: result_authselect_profile
          changed_when: false
          when:
          - result_authselect_check_cmd is success

        - name: Limit Password Reuse - Define the current authselect profile as a
            local fact
          ansible.builtin.set_fact:
            authselect_current_profile: '{{ result_authselect_profile.stdout }}'
            authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
          when:
          - result_authselect_profile is not skipped
          - result_authselect_profile.stdout is match("custom/")

        - name: Limit Password Reuse - Define the new authselect custom profile as
            a local fact
          ansible.builtin.set_fact:
            authselect_current_profile: '{{ result_authselect_profile.stdout }}'
            authselect_custom_profile: custom/hardening
          when:
          - result_authselect_profile is not skipped
          - result_authselect_profile.stdout is not match("custom/")

        - name: Limit Password Reuse - Get authselect current features to also enable
            them in the custom profile
          ansible.builtin.shell:
            cmd: authselect current | tail -n+3 | awk '{ print $2 }'
          register: result_authselect_features
          changed_when: false
          when:
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")

        - name: Limit Password Reuse - Check if any custom profile with the same name
            was already created
          ansible.builtin.stat:
            path: /etc/authselect/{{ authselect_custom_profile }}
          register: result_authselect_custom_profile_present
          changed_when: false
          when:
          - authselect_current_profile is not match("custom/")

        - name: Limit Password Reuse - Create an authselect custom profile based on
            the current profile
          ansible.builtin.command:
            cmd: authselect create-profile hardening -b {{ authselect_current_profile
              }}
          when:
          - result_authselect_check_cmd is success
          - authselect_current_profile is not match("custom/")
          - not result_authselect_custom_profile_present.stat.exists

        - name: Limit Password Reuse - Ensure authselect changes are applied
          ansible.builtin.command:
            cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")
          - authselect_custom_profile is not match(authselect_current_profile)

        - name: Limit Password Reuse - Ensure the authselect custom profile is selected
          ansible.builtin.command:
            cmd: authselect select {{ authselect_custom_profile }}
          register: result_pam_authselect_select_profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")
          - authselect_custom_profile is not match(authselect_current_profile)

        - name: Limit Password Reuse - Restore the authselect features in the custom
            profile
          ansible.builtin.command:
            cmd: authselect enable-feature {{ item }}
          loop: '{{ result_authselect_features.stdout_lines }}'
          register: result_pam_authselect_restore_features
          when:
          - result_authselect_profile is not skipped
          - result_authselect_features is not skipped
          - result_pam_authselect_select_profile is not skipped

        - name: Limit Password Reuse - Ensure authselect changes are applied
          ansible.builtin.command:
            cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - result_pam_authselect_restore_features is not skipped

        - name: Limit Password Reuse - Change the PAM file to be edited according
            to the custom authselect profile
          ansible.builtin.set_fact:
            pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
              | basename }}
        when:
        - result_authselect_present.stat.exists

      - name: Limit Password Reuse - Define a fact for control already filtered in
          case filters are used
        ansible.builtin.set_fact:
          pam_module_control: ''

      - name: Limit Password Reuse - Ensure the "remember" option from "pam_pwhistory.so"
          is not present in {{ pam_file_path }}
        ansible.builtin.replace:
          dest: '{{ pam_file_path }}'
          regexp: (.*password.*pam_pwhistory.so.*)\bremember\b=?[0-9a-zA-Z]*(.*)
          replace: \1\2
        register: result_pam_option_removal

      - name: Limit Password Reuse - Ensure authselect changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b
        when:
        - result_authselect_present.stat.exists
        - result_pam_option_removal is changed
      when:
      - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_pwhistory_conf_check.stat.exists
  tags:
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Limit Password Reuse - pam_pwhistory.so parameters are configured in PAM files
  block:

  - name: Limit Password Reuse - Define the PAM file to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: Limit Password Reuse - Check if system relies on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Limit Password Reuse - Ensure authselect custom profile is used if authselect
      is present
    block:

    - name: Limit Password Reuse - Check integrity of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Limit Password Reuse - Informative message based on the authselect integrity
        check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Limit Password Reuse - Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Limit Password Reuse - Define the current authselect profile as a local
        fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Limit Password Reuse - Define the new authselect custom profile as a local
        fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Limit Password Reuse - Get authselect current features to also enable
        them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Limit Password Reuse - Check if any custom profile with the same name
        was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Limit Password Reuse - Create an authselect custom profile based on the
        current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Limit Password Reuse - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Limit Password Reuse - Ensure the authselect custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Limit Password Reuse - Restore the authselect features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Limit Password Reuse - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Limit Password Reuse - Change the PAM file to be edited according to the
        custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Limit Password Reuse - Define a fact for control already filtered in case
      filters are used
    ansible.builtin.set_fact:
      pam_module_control: requisite

  - name: Limit Password Reuse - Check if expected PAM module line is present in {{
      pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ pam_module_control | regex_escape() }}\s+pam_pwhistory.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: Limit Password Reuse - Include or update the PAM module line in {{ pam_file_path
      }}
    block:

    - name: Limit Password Reuse - Check if required PAM module line is present in
        {{ pam_file_path }} with different control
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: Limit Password Reuse - Ensure the correct control for the required PAM
        module line in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
        replace: \1{{ pam_module_control }} \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: Limit Password Reuse - Ensure the required PAM module line is included
        in {{ pam_file_path }}
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        line: password    {{ pam_module_control }}    pam_pwhistory.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: Limit Password Reuse - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0

  - name: Limit Password Reuse - Define a fact for control already filtered in case
      filters are used
    ansible.builtin.set_fact:
      pam_module_control: requisite

  - name: Limit Password Reuse - Check if the required PAM module option is present
      in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ pam_module_control | regex_escape() }}\s+pam_pwhistory.so\s*.*\sremember\b
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_module_accounts_password_pam_unix_remember_option_present

  - name: Limit Password Reuse - Ensure the "remember" PAM option for "pam_pwhistory.so"
      is included in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+{{ pam_module_control | regex_escape() }}\s+pam_pwhistory.so.*)
      line: \1 remember={{ var_password_pam_unix_remember }}
      state: present
    register: result_pam_accounts_password_pam_unix_remember_add
    when:
    - result_pam_module_accounts_password_pam_unix_remember_option_present.found ==
      0

  - name: Limit Password Reuse - Ensure the required value for "remember" PAM option
      from "pam_pwhistory.so" in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+{{ pam_module_control | regex_escape() }}\s+pam_pwhistory.so\s+.*)(remember)=[0-9a-zA-Z]+\s*(.*)
      line: \1\2={{ var_password_pam_unix_remember }} \3
    register: result_pam_accounts_password_pam_unix_remember_edit
    when:
    - result_pam_module_accounts_password_pam_unix_remember_option_present.found >
      0

  - name: Limit Password Reuse - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - (result_pam_remember_add is defined and result_pam_remember_add.changed) or
      (result_pam_remember_edit is defined and result_pam_remember_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - not result_pwhistory_conf_check.stat.exists
  tags:
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_unix_remember='5'






if [ -f /usr/bin/authselect ]; then
    if authselect list-features sssd | grep -q with-pwhistory; then
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi
        authselect enable-feature with-pwhistory

        authselect apply-changes -b
    else
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
        if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*" "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1requisite \2/" "$PAM_FILE_PATH"
            else
                LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                if [ ! -z $LAST_MATCH_LINE ]; then
                    sed -i --follow-symlinks $LAST_MATCH_LINE" a password     requisite    pam_pwhistory.so" "$PAM_FILE_PATH"
                else
                    echo "password    requisite    pam_pwhistory.so" >> "$PAM_FILE_PATH"
                fi
            fi
        fi
    fi
else
    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*" "/etc/pam.d/system-auth"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "/etc/pam.d/system-auth")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1requisite \2/" "/etc/pam.d/system-auth"
        else
            LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "/etc/pam.d/system-auth" | tail -n 1 | cut -d: -f 1)
            if [ ! -z $LAST_MATCH_LINE ]; then
                sed -i --follow-symlinks $LAST_MATCH_LINE" a password     requisite    pam_pwhistory.so" "/etc/pam.d/system-auth"
            else
                echo "password    requisite    pam_pwhistory.so" >> "/etc/pam.d/system-auth"
            fi
        fi
    fi
fi

PWHISTORY_CONF="/etc/security/pwhistory.conf"
if [ -f $PWHISTORY_CONF ]; then
    regex="^\s*remember\s*="
    line="remember = $var_password_pam_unix_remember"
    if ! grep -q $regex $PWHISTORY_CONF; then
        echo $line >> $PWHISTORY_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(remember\s*=\s*\)\(\S\+\)|\1'"$var_password_pam_unix_remember"'|g' $PWHISTORY_CONF
    fi
    if [ -e "/etc/pam.d/system-auth" ] ; then
        PAM_FILE_PATH="/etc/pam.d/system-auth"
        if [ -f /usr/bin/authselect ]; then
            
            if ! authselect check; then
            echo "
            authselect integrity check failed. Remediation aborted!
            This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
            It is not recommended to manually edit the PAM files when authselect tool is available.
            In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
            exit 1
            fi

            CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
            # If not already in use, a custom profile is created preserving the enabled features.
            if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                authselect create-profile hardening -b $CURRENT_PROFILE
                CURRENT_PROFILE="custom/hardening"
                
                authselect apply-changes -b --backup=before-hardening-custom-profile
                authselect select $CURRENT_PROFILE
                for feature in $ENABLED_FEATURES; do
                    authselect enable-feature $feature;
                done
                
                authselect apply-changes -b --backup=after-hardening-custom-profile
            fi
            PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
            PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

            authselect apply-changes -b
        fi
        
    if grep -qP "^\s*password\s.*\bpam_pwhistory.so\s.*\bremember\b" "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks "s/(.*password.*pam_pwhistory.so.*)\bremember\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
    fi
        if [ -f /usr/bin/authselect ]; then
            
            authselect apply-changes -b
        fi
    else
        echo "/etc/pam.d/system-auth was not found" >&2
    fi
else
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*" "$PAM_FILE_PATH"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1requisite \2/" "$PAM_FILE_PATH"
        else
            echo "password    requisite    pam_pwhistory.so" >> "$PAM_FILE_PATH"
        fi
    fi
    # Check the option
    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*\sremember\b" "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks "/\s*password\s+requisite\s+pam_pwhistory.so.*/ s/$/ remember=$var_password_pam_unix_remember/" "$PAM_FILE_PATH"
    else
        sed -i -E --follow-symlinks "s/(\s*password\s+requisite\s+pam_pwhistory.so\s+.*)(remember=)[[:alnum:]]+\s*(.*)/\1\2$var_password_pam_unix_remember \3/" "$PAM_FILE_PATH"
    fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Lock Accounts After Failed Password Attempts   [ref]

This rule configures the system to lock out accounts after a number of incorrect login attempts using pam_faillock.so. pam_faillock.so module requires multiple entries in pam files. These entries must be carefully defined to work as expected. Ensure that the file /etc/security/faillock.conf contains the following entry: deny = <count> Where count should be less than or equal to 3 and greater than 0. In order to avoid errors when manually editing these files, it is recommended to use the appropriate tools, such as authselect or authconfig, depending on the OS version.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. If the system supports the /etc/security/faillock.conf file, the pam_faillock parameters should be defined in faillock.conf file.
Rationale:
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, also known as brute-forcing, is reduced. Limits are imposed by locking the account.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny
References:
cis-csc1, 12, 15, 16
cjis5.5.3
cobit5DSS05.04, DSS05.10, DSS06.10
cui3.1.8
disaCCI-000044, CCI-002238
isa-62443-20094.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nistCM-6(a), AC-7(a)
nist-csfPR.AC-7
osppFIA_AFL.1
pcidssReq-8.1.6
os-srgSRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005
stigidOL07-00-010320
anssiR31
pcidss48.3.4, 8.3
stigrefSV-221690r958388_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.5.3
  - DISA-STIG-OL07-00-010320
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Check if system relies on authselect
    tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CJIS-5.5.3
  - DISA-STIG-OL07-00-010320
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Remediation where authselect
    tool is present
  block:

  - name: Lock Accounts After Failed Password Attempts - Check integrity of authselect
      current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Lock Accounts After Failed Password Attempts - Informative message based
      on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Lock Accounts After Failed Password Attempts - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Lock Accounts After Failed Password Attempts - Ensure "with-faillock" feature
      is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-faillock
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-faillock")

  - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
      are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CJIS-5.5.3
  - DISA-STIG-OL07-00-010320
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Remediation where authselect
    tool is not present
  block:

  - name: Lock Accounts After Failed Password Attempts - Check if pam_faillock.so
      is already enabled
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail)
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_is_enabled

  - name: Lock Accounts After Failed Password Attempts - Enable pam_faillock.so preauth
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so preauth
      insertbefore: ^auth.*sufficient.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Lock Accounts After Failed Password Attempts - Enable pam_faillock.so authfail
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so authfail
      insertbefore: ^auth.*required.*pam_deny\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Lock Accounts After Failed Password Attempts - Enable pam_faillock.so account
      section editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: account     required      pam_faillock.so
      insertbefore: ^account.*required.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_authselect_present.stat.exists
  tags:
  - CJIS-5.5.3
  - DISA-STIG-OL07-00-010320
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_deny # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_deny: !!str 3
  tags:
    - always

- name: Lock Accounts After Failed Password Attempts - Check the presence of /etc/security/faillock.conf
    file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CJIS-5.5.3
  - DISA-STIG-OL07-00-010320
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Ensure the pam_faillock.so
    deny parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*deny\s*=
    line: deny = {{ var_accounts_passwords_pam_faillock_deny }}
    state: present
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CJIS-5.5.3
  - DISA-STIG-OL07-00-010320
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Ensure the pam_faillock.so
    deny parameter not in PAM files
  block:

  - name: Lock Accounts After Failed Password Attempts - Check if /etc/pam.d/system-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/system-auth
    register: result_pam_file_present

  - name: Lock Accounts After Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Lock Accounts After Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/system-auth

    - name: Lock Accounts After Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Lock Accounts After Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Lock Accounts After Failed Password Attempts - Informative message based
          on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Lock Accounts After Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Check if any custom profile
          with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Lock Accounts After Failed Password Attempts - Change the PAM file to
          be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Lock Accounts After Failed Password Attempts - Define a fact for control
        already filtered in case filters are used
      ansible.builtin.set_fact:
        pam_module_control: ''

    - name: Lock Accounts After Failed Password Attempts - Ensure the "deny" option
        from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bdeny\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists

  - name: Lock Accounts After Failed Password Attempts - Check if /etc/pam.d/password-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/password-auth
    register: result_pam_file_present

  - name: Lock Accounts After Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Lock Accounts After Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/password-auth

    - name: Lock Accounts After Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Lock Accounts After Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Lock Accounts After Failed Password Attempts - Informative message based
          on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Lock Accounts After Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Check if any custom profile
          with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Lock Accounts After Failed Password Attempts - Change the PAM file to
          be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Lock Accounts After Failed Password Attempts - Define a fact for control
        already filtered in case filters are used
      ansible.builtin.set_fact:
        pam_module_control: ''

    - name: Lock Accounts After Failed Password Attempts - Ensure the "deny" option
        from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bdeny\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CJIS-5.5.3
  - DISA-STIG-OL07-00-010320
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Ensure the pam_faillock.so
    deny parameter in PAM files
  block:

  - name: Lock Accounts After Failed Password Attempts - Check if pam_faillock.so
      deny parameter is already enabled in pam files
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail).*deny
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_deny_parameter_is_present

  - name: Lock Accounts After Failed Password Attempts - Ensure the inclusion of pam_faillock.so
      preauth deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
      line: \1required\3 deny={{ var_accounts_passwords_pam_faillock_deny }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found == 0

  - name: Lock Accounts After Failed Password Attempts - Ensure the inclusion of pam_faillock.so
      authfail deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
      line: \1required\3 deny={{ var_accounts_passwords_pam_faillock_deny }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found == 0

  - name: Lock Accounts After Failed Password Attempts - Ensure the desired value
      for pam_faillock.so preauth deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)(deny)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_deny }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found > 0

  - name: Lock Accounts After Failed Password Attempts - Ensure the desired value
      for pam_faillock.so authfail deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)(deny)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_deny }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found > 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_faillock_conf_check.stat.exists
  tags:
  - CJIS-5.5.3
  - DISA-STIG-OL07-00-010320
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_faillock_deny='3'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*deny\s*="
    line="deny = $var_accounts_passwords_pam_faillock_deny"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(deny\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_deny"'|g' $FAILLOCK_CONF
    fi
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP "^\s*auth\s.*\bpam_faillock.so\s.*\bdeny\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "s/(.*auth.*pam_faillock.so.*)\bdeny\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so (preauth|authfail).*deny' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*silent.*/ s/$/ deny='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ deny='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*silent.*\)\('"deny"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_deny"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"deny"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_deny"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set Interval For Counting Failed Password Attempts   [ref]

Utilizing pam_faillock.so, the fail_interval directive configures the system to lock out an account after a number of incorrect login attempts within a specified time period. Ensure that the file /etc/security/faillock.conf contains the following entry: fail_interval = <interval-in-seconds> where interval-in-seconds is 900 or greater. In order to avoid errors when manually editing these files, it is recommended to use the appropriate tools, such as authselect or authconfig, depending on the OS version.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. If the system supports the /etc/security/faillock.conf file, the pam_faillock parameters should be defined in faillock.conf file.
Rationale:
By limiting the number of failed logon attempts the risk of unauthorized system access via user password guessing, otherwise known as brute-forcing, is reduced. Limits are imposed by locking the account.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_interval
References:
cis-csc1, 12, 15, 16
cobit5DSS05.04, DSS05.10, DSS06.10
disaCCI-000044, CCI-002238
isa-62443-20094.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nistCM-6(a), AC-7(a)
nist-csfPR.AC-7
osppFIA_AFL.1
os-srgSRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005
stigidOL07-00-010320
anssiR31
stigrefSV-221690r958388_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-OL07-00-010320
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Check if system relies
    on authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-010320
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Remediation where authselect
    tool is present
  block:

  - name: Set Interval For Counting Failed Password Attempts - Check integrity of
      authselect current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Set Interval For Counting Failed Password Attempts - Informative message
      based on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Set Interval For Counting Failed Password Attempts - Get authselect current
      features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Set Interval For Counting Failed Password Attempts - Ensure "with-faillock"
      feature is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-faillock
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-faillock")

  - name: Set Interval For Counting Failed Password Attempts - Ensure authselect changes
      are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - DISA-STIG-OL07-00-010320
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Remediation where authselect
    tool is not present
  block:

  - name: Set Interval For Counting Failed Password Attempts - Check if pam_faillock.so
      is already enabled
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail)
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_is_enabled

  - name: Set Interval For Counting Failed Password Attempts - Enable pam_faillock.so
      preauth editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so preauth
      insertbefore: ^auth.*sufficient.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Set Interval For Counting Failed Password Attempts - Enable pam_faillock.so
      authfail editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so authfail
      insertbefore: ^auth.*required.*pam_deny\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Set Interval For Counting Failed Password Attempts - Enable pam_faillock.so
      account section editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: account     required      pam_faillock.so
      insertbefore: ^account.*required.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_authselect_present.stat.exists
  tags:
  - DISA-STIG-OL07-00-010320
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_fail_interval # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_fail_interval: !!str 900
  tags:
    - always

- name: Set Interval For Counting Failed Password Attempts - Check the presence of
    /etc/security/faillock.conf file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-010320
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Ensure the pam_faillock.so
    fail_interval parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*fail_interval\s*=
    line: fail_interval = {{ var_accounts_passwords_pam_faillock_fail_interval }}
    state: present
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - DISA-STIG-OL07-00-010320
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Ensure the pam_faillock.so
    fail_interval parameter not in PAM files
  block:

  - name: Set Interval For Counting Failed Password Attempts - Check if /etc/pam.d/system-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/system-auth
    register: result_pam_file_present

  - name: Set Interval For Counting Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Set Interval For Counting Failed Password Attempts - Define the PAM file
        to be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/system-auth

    - name: Set Interval For Counting Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
        custom profile is used if authselect is present
      block:

      - name: Set Interval For Counting Failed Password Attempts - Check integrity
          of authselect current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Set Interval For Counting Failed Password Attempts - Informative message
          based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Set Interval For Counting Failed Password Attempts - Get authselect
          current profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Set Interval For Counting Failed Password Attempts - Define the current
          authselect profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Define the new
          authselect custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Get authselect
          current features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Check if any custom
          profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Interval For Counting Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Interval For Counting Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Set Interval For Counting Failed Password Attempts - Change the PAM
          file to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Set Interval For Counting Failed Password Attempts - Define a fact for
        control already filtered in case filters are used
      ansible.builtin.set_fact:
        pam_module_control: ''

    - name: Set Interval For Counting Failed Password Attempts - Ensure the "fail_interval"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bfail_interval\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists

  - name: Set Interval For Counting Failed Password Attempts - Check if /etc/pam.d/password-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/password-auth
    register: result_pam_file_present

  - name: Set Interval For Counting Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Set Interval For Counting Failed Password Attempts - Define the PAM file
        to be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/password-auth

    - name: Set Interval For Counting Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
        custom profile is used if authselect is present
      block:

      - name: Set Interval For Counting Failed Password Attempts - Check integrity
          of authselect current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Set Interval For Counting Failed Password Attempts - Informative message
          based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Set Interval For Counting Failed Password Attempts - Get authselect
          current profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Set Interval For Counting Failed Password Attempts - Define the current
          authselect profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Define the new
          authselect custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Get authselect
          current features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Check if any custom
          profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Interval For Counting Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Interval For Counting Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Set Interval For Counting Failed Password Attempts - Change the PAM
          file to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Set Interval For Counting Failed Password Attempts - Define a fact for
        control already filtered in case filters are used
      ansible.builtin.set_fact:
        pam_module_control: ''

    - name: Set Interval For Counting Failed Password Attempts - Ensure the "fail_interval"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bfail_interval\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - DISA-STIG-OL07-00-010320
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Ensure the pam_faillock.so
    fail_interval parameter in PAM files
  block:

  - name: Set Interval For Counting Failed Password Attempts - Check if pam_faillock.so
      fail_interval parameter is already enabled in pam files
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail).*fail_interval
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_fail_interval_parameter_is_present

  - name: Set Interval For Counting Failed Password Attempts - Ensure the inclusion
      of pam_faillock.so preauth fail_interval parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
      line: \1required\3 fail_interval={{ var_accounts_passwords_pam_faillock_fail_interval
        }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_fail_interval_parameter_is_present.found == 0

  - name: Set Interval For Counting Failed Password Attempts - Ensure the inclusion
      of pam_faillock.so authfail fail_interval parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
      line: \1required\3 fail_interval={{ var_accounts_passwords_pam_faillock_fail_interval
        }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_fail_interval_parameter_is_present.found == 0

  - name: Set Interval For Counting Failed Password Attempts - Ensure the desired
      value for pam_faillock.so preauth fail_interval parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)(fail_interval)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_fail_interval }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_fail_interval_parameter_is_present.found > 0

  - name: Set Interval For Counting Failed Password Attempts - Ensure the desired
      value for pam_faillock.so authfail fail_interval parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)(fail_interval)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_fail_interval }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_fail_interval_parameter_is_present.found > 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_faillock_conf_check.stat.exists
  tags:
  - DISA-STIG-OL07-00-010320
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_faillock_fail_interval='900'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*fail_interval\s*="
    line="fail_interval = $var_accounts_passwords_pam_faillock_fail_interval"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(fail_interval\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_fail_interval"'|g' $FAILLOCK_CONF
    fi
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP "^\s*auth\s.*\bpam_faillock.so\s.*\bfail_interval\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "s/(.*auth.*pam_faillock.so.*)\bfail_interval\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so (preauth|authfail).*fail_interval' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*silent.*/ s/$/ fail_interval='"$var_accounts_passwords_pam_faillock_fail_interval"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ fail_interval='"$var_accounts_passwords_pam_faillock_fail_interval"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*silent.*\)\('"fail_interval"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_fail_interval"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"fail_interval"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_fail_interval"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set Lockout Time for Failed Password Attempts   [ref]

This rule configures the system to lock out accounts during a specified time period after a number of incorrect login attempts using pam_faillock.so. Ensure that the file /etc/security/faillock.conf contains the following entry: unlock_time=<interval-in-seconds> where interval-in-seconds is 0 or greater. pam_faillock.so module requires multiple entries in pam files. These entries must be carefully defined to work as expected. In order to avoid any errors when manually editing these files, it is recommended to use the appropriate tools, such as authselect or authconfig, depending on the OS version. If unlock_time is set to 0, manual intervention by an administrator is required to unlock a user. This should be done using the faillock tool.
Warning:  If the system supports the new /etc/security/faillock.conf file but the pam_faillock.so parameters are defined directly in /etc/pam.d/system-auth and /etc/pam.d/password-auth, the remediation will migrate the unlock_time parameter to /etc/security/faillock.conf to ensure compatibility with authselect tool. The parameters deny and fail_interval, if used, also have to be migrated by their respective remediation.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. If the system supports the /etc/security/faillock.conf file, the pam_faillock parameters should be defined in faillock.conf file.
Rationale:
By limiting the number of failed logon attempts the risk of unauthorized system access via user password guessing, otherwise known as brute-forcing, is reduced. Limits are imposed by locking the account.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_unlock_time
References:
cis-csc1, 12, 15, 16
cjis5.5.3
cobit5DSS05.04, DSS05.10, DSS06.10
cui3.1.8
disaCCI-000044, CCI-002238
isa-62443-20094.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nistCM-6(a), AC-7(b)
nist-csfPR.AC-7
osppFIA_AFL.1
pcidssReq-8.1.7
os-srgSRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005
stigidOL07-00-010320
anssiR31
pcidss48.3.4, 8.3
stigrefSV-221690r958388_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.5.3
  - DISA-STIG-OL07-00-010320
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Check if system relies on
    authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CJIS-5.5.3
  - DISA-STIG-OL07-00-010320
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Remediation where authselect
    tool is present
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check integrity of authselect
      current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Set Lockout Time for Failed Password Attempts - Informative message based
      on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Set Lockout Time for Failed Password Attempts - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Set Lockout Time for Failed Password Attempts - Ensure "with-faillock" feature
      is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-faillock
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-faillock")

  - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
      are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CJIS-5.5.3
  - DISA-STIG-OL07-00-010320
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Remediation where authselect
    tool is not present
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check if pam_faillock.so
      is already enabled
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail)
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_is_enabled

  - name: Set Lockout Time for Failed Password Attempts - Enable pam_faillock.so preauth
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so preauth
      insertbefore: ^auth.*sufficient.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Enable pam_faillock.so authfail
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so authfail
      insertbefore: ^auth.*required.*pam_deny\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Enable pam_faillock.so account
      section editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: account     required      pam_faillock.so
      insertbefore: ^account.*required.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_authselect_present.stat.exists
  tags:
  - CJIS-5.5.3
  - DISA-STIG-OL07-00-010320
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_unlock_time # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_unlock_time: !!str 0
  tags:
    - always

- name: Set Lockout Time for Failed Password Attempts - Check the presence of /etc/security/faillock.conf
    file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CJIS-5.5.3
  - DISA-STIG-OL07-00-010320
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Ensure the pam_faillock.so
    unlock_time parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*unlock_time\s*=
    line: unlock_time = {{ var_accounts_passwords_pam_faillock_unlock_time }}
    state: present
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CJIS-5.5.3
  - DISA-STIG-OL07-00-010320
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Ensure the pam_faillock.so
    unlock_time parameter not in PAM files
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check if /etc/pam.d/system-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/system-auth
    register: result_pam_file_present

  - name: Set Lockout Time for Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Set Lockout Time for Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/system-auth

    - name: Set Lockout Time for Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Set Lockout Time for Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Set Lockout Time for Failed Password Attempts - Informative message
          based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Set Lockout Time for Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Check if any custom
          profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Change the PAM file
          to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Set Lockout Time for Failed Password Attempts - Define a fact for control
        already filtered in case filters are used
      ansible.builtin.set_fact:
        pam_module_control: ''

    - name: Set Lockout Time for Failed Password Attempts - Ensure the "unlock_time"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bunlock_time\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists

  - name: Set Lockout Time for Failed Password Attempts - Check if /etc/pam.d/password-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/password-auth
    register: result_pam_file_present

  - name: Set Lockout Time for Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Set Lockout Time for Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/password-auth

    - name: Set Lockout Time for Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Set Lockout Time for Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Set Lockout Time for Failed Password Attempts - Informative message
          based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Set Lockout Time for Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Check if any custom
          profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Change the PAM file
          to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Set Lockout Time for Failed Password Attempts - Define a fact for control
        already filtered in case filters are used
      ansible.builtin.set_fact:
        pam_module_control: ''

    - name: Set Lockout Time for Failed Password Attempts - Ensure the "unlock_time"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bunlock_time\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CJIS-5.5.3
  - DISA-STIG-OL07-00-010320
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Ensure the pam_faillock.so
    unlock_time parameter in PAM files
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check if pam_faillock.so
      unlock_time parameter is already enabled in pam files
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail).*unlock_time
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_unlock_time_parameter_is_present

  - name: Set Lockout Time for Failed Password Attempts - Ensure the inclusion of
      pam_faillock.so preauth unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
      line: \1required\3 unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
        }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Ensure the inclusion of
      pam_faillock.so authfail unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
      line: \1required\3 unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
        }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Ensure the desired value
      for pam_faillock.so preauth unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)(unlock_time)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_unlock_time }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found > 0

  - name: Set Lockout Time for Failed Password Attempts - Ensure the desired value
      for pam_faillock.so authfail unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)(unlock_time)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_unlock_time }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found > 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_faillock_conf_check.stat.exists
  tags:
  - CJIS-5.5.3
  - DISA-STIG-OL07-00-010320
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_faillock_unlock_time='0'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*unlock_time\s*="
    line="unlock_time = $var_accounts_passwords_pam_faillock_unlock_time"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(unlock_time\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_unlock_time"'|g' $FAILLOCK_CONF
    fi
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP "^\s*auth\s.*\bpam_faillock.so\s.*\bunlock_time\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "s/(.*auth.*pam_faillock.so.*)\bunlock_time\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so (preauth|authfail).*unlock_time' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*silent.*/ s/$/ unlock_time='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ unlock_time='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*silent.*\)\('"unlock_time"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"unlock_time"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Set Password Quality Requirements   Group contains 1 group and 8 rules
[ref]   The default pam_pwquality PAM module provides strength checking for passwords. It performs a number of checks, such as making sure passwords are not similar to dictionary words, are of at least a certain length, are not the previous password reversed, and are not simply a change of case from the previous password. It can also require passwords to be in certain character classes. The pam_pwquality module is the preferred way of configuring password requirements.

The man pages pam_pwquality(8) provide information on the capabilities and configuration of each.
Group   Set Password Quality Requirements with pam_pwquality   Group contains 8 rules
[ref]   The pam_pwquality PAM module can be configured to meet requirements for a variety of policies.

For example, to configure pam_pwquality to require at least one uppercase character, lowercase character, digit, and other (special) character, make sure that pam_pwquality exists in /etc/pam.d/system-auth:
password    requisite     pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=
If no such line exists, add one as the first line of the password section in /etc/pam.d/system-auth. Next, modify the settings in /etc/security/pwquality.conf to match the following:
difok = 4
minlen = 14
dcredit = -1
ucredit = -1
lcredit = -1
ocredit = -1
maxrepeat = 3
The arguments can be modified to ensure compliance with your organization's security policy. Discussion of each parameter follows.

Rule   Ensure PAM Enforces Password Requirements - Minimum Digit Characters   [ref]

The pam_pwquality module's dcredit parameter controls requirements for usage of digits in a password. When set to a negative number, any password will be required to contain that many digits. When set to a positive number, pam_pwquality will grant +1 additional length credit for each digit. Modify the dcredit setting in /etc/security/pwquality.conf to require the use of a digit in passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised. Requiring digits makes password guessing attacks more difficult by ensuring a larger search space.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_dcredit
References:
cis-csc1, 12, 15, 16, 5
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-004066
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(a), CM-6(a), IA-5(4)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
osppFMT_SMF_EXT.1
pcidssReq-8.2.3
os-srgSRG-OS-000071-GPOS-00039
stigidOL07-00-010140
anssiR31
pcidss48.3.6, 8.3
stigrefSV-221671r1015168_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-OL07-00-010140
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.6
  - accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_dcredit # promote to variable
  set_fact:
    var_password_pam_dcredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters - Check
    if /etc/pam.d/system-auth file is present
  ansible.builtin.stat:
    path: /etc/pam.d/system-auth
  register: result_pam_file_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-010140
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.6
  - accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters - Check
    the proper remediation for the system
  block:

  - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters - Define
      the PAM file to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters - Check
      if system relies on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters - Ensure
      authselect custom profile is used if authselect is present
    block:

    - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters -
        Check integrity of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters -
        Informative message based on the authselect integrity check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters -
        Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters -
        Define the current authselect profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters -
        Define the new authselect custom profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters -
        Get authselect current features to also enable them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters -
        Check if any custom profile with the same name was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters -
        Create an authselect custom profile based on the current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters -
        Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters -
        Ensure the authselect custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters -
        Restore the authselect features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters -
        Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters -
        Change the PAM file to be edited according to the custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters - Define
      a fact for control already filtered in case filters are used
    ansible.builtin.set_fact:
      pam_module_control: ''

  - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters - Ensure
      the "dcredit" option from "pam_pwquality.so" is not present in {{ pam_file_path
      }}
    ansible.builtin.replace:
      dest: '{{ pam_file_path }}'
      regexp: (.*password.*pam_pwquality.so.*)\bdcredit\b=?[0-9a-zA-Z]*(.*)
      replace: \1\2
    register: result_pam_option_removal

  - name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters - Ensure
      authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - result_pam_option_removal is changed
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_file_present.stat.exists
  tags:
  - DISA-STIG-OL07-00-010140
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.6
  - accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters - Ensure
    PAM variable dcredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*dcredit
    line: dcredit = {{ var_password_pam_dcredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-010140
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.6
  - accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_dcredit='-1'





if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bdcredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bdcredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^dcredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_dcredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^dcredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^dcredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Different Characters   [ref]

The pam_pwquality module's difok parameter sets the number of characters in a password that must not be present in and old password during a password change.

Modify the difok setting in /etc/security/pwquality.conf to equal 4 to require differing characters when changing passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute–force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.

Requiring a minimum number of different characters during password changes ensures that newly changed passwords should not resemble previously compromised ones. Note that passwords which are changed on compromised systems will still be compromised, however.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_difok
References:
cis-csc1, 12, 15, 16, 5
cjis5.6.2.1.1
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-004066
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(b), CM-6(a), IA-5(4)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
os-srgSRG-OS-000072-GPOS-00040
stigidOL07-00-010160
stigrefSV-221673r1015170_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.6.2.1.1
  - DISA-STIG-OL07-00-010160
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(b)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_difok
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_difok # promote to variable
  set_fact:
    var_password_pam_difok: !!str 4
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Different Characters -
    Check if /etc/pam.d/system-auth file is present
  ansible.builtin.stat:
    path: /etc/pam.d/system-auth
  register: result_pam_file_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CJIS-5.6.2.1.1
  - DISA-STIG-OL07-00-010160
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(b)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_difok
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure PAM Enforces Password Requirements - Minimum Different Characters -
    Check the proper remediation for the system
  block:

  - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
      - Define the PAM file to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
      - Check if system relies on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
      - Ensure authselect custom profile is used if authselect is present
    block:

    - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
        - Check integrity of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
        - Informative message based on the authselect integrity check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
        - Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
        - Define the current authselect profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
        - Define the new authselect custom profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
        - Get authselect current features to also enable them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
        - Check if any custom profile with the same name was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
        - Create an authselect custom profile based on the current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
        - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
        - Ensure the authselect custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
        - Restore the authselect features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
        - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
        - Change the PAM file to be edited according to the custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
      - Define a fact for control already filtered in case filters are used
    ansible.builtin.set_fact:
      pam_module_control: ''

  - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
      - Ensure the "difok" option from "pam_pwquality.so" is not present in {{ pam_file_path
      }}
    ansible.builtin.replace:
      dest: '{{ pam_file_path }}'
      regexp: (.*password.*pam_pwquality.so.*)\bdifok\b=?[0-9a-zA-Z]*(.*)
      replace: \1\2
    register: result_pam_option_removal

  - name: Ensure PAM Enforces Password Requirements - Minimum Different Characters
      - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - result_pam_option_removal is changed
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_file_present.stat.exists
  tags:
  - CJIS-5.6.2.1.1
  - DISA-STIG-OL07-00-010160
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(b)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_difok
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure PAM Enforces Password Requirements - Minimum Different Characters -
    Ensure PAM variable difok is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*difok
    line: difok = {{ var_password_pam_difok }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CJIS-5.6.2.1.1
  - DISA-STIG-OL07-00-010160
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(b)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_difok
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_difok='4'





if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bdifok\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bdifok\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^difok")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_difok"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^difok\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^difok\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters   [ref]

The pam_pwquality module's lcredit parameter controls requirements for usage of lowercase letters in a password. When set to a negative number, any password will be required to contain that many lowercase characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each lowercase character. Modify the lcredit setting in /etc/security/pwquality.conf to require the use of a lowercase character in passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.
Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possble combinations that need to be tested before the password is compromised. Requiring a minimum number of lowercase characters makes password guessing attacks more difficult by ensuring a larger search space.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_lcredit
References:
cis-csc1, 12, 15, 16, 5
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-004066
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(a), CM-6(a), IA-5(4)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
osppFMT_SMF_EXT.1
pcidssReq-8.2.3
os-srgSRG-OS-000070-GPOS-00038
stigidOL07-00-010130
anssiR31
pcidss48.3.6, 8.3
stigrefSV-221670r1015167_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-OL07-00-010130
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.6
  - accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_lcredit # promote to variable
  set_fact:
    var_password_pam_lcredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters -
    Check if /etc/pam.d/system-auth file is present
  ansible.builtin.stat:
    path: /etc/pam.d/system-auth
  register: result_pam_file_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-010130
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.6
  - accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters -
    Check the proper remediation for the system
  block:

  - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
      - Define the PAM file to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
      - Check if system relies on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
      - Ensure authselect custom profile is used if authselect is present
    block:

    - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
        - Check integrity of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
        - Informative message based on the authselect integrity check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
        - Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
        - Define the current authselect profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
        - Define the new authselect custom profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
        - Get authselect current features to also enable them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
        - Check if any custom profile with the same name was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
        - Create an authselect custom profile based on the current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
        - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
        - Ensure the authselect custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
        - Restore the authselect features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
        - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
        - Change the PAM file to be edited according to the custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
      - Define a fact for control already filtered in case filters are used
    ansible.builtin.set_fact:
      pam_module_control: ''

  - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
      - Ensure the "lcredit" option from "pam_pwquality.so" is not present in {{ pam_file_path
      }}
    ansible.builtin.replace:
      dest: '{{ pam_file_path }}'
      regexp: (.*password.*pam_pwquality.so.*)\blcredit\b=?[0-9a-zA-Z]*(.*)
      replace: \1\2
    register: result_pam_option_removal

  - name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters
      - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - result_pam_option_removal is changed
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_file_present.stat.exists
  tags:
  - DISA-STIG-OL07-00-010130
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.6
  - accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters -
    Ensure PAM variable lcredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*lcredit
    line: lcredit = {{ var_password_pam_lcredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-010130
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.6
  - accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_lcredit='-1'





if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\blcredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\blcredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^lcredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_lcredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^lcredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^lcredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating Characters from Same Character Class   [ref]

The pam_pwquality module's maxclassrepeat parameter controls requirements for consecutive repeating characters from the same character class. When set to a positive number, it will reject passwords which contain more than that number of consecutive characters from the same character class. Modify the maxclassrepeat setting in /etc/security/pwquality.conf to equal 4 to prevent a run of (4 + 1) or more identical characters.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.
Password complexity is one factor of several that determines how long it takes to crack a password. The more complex a password, the greater the number of possible combinations that need to be tested before the password is compromised.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_maxclassrepeat
References:
cis-csc1, 12, 15, 16, 5
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-004066
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(a), CM-6(a), IA-5(4)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
os-srgSRG-OS-000072-GPOS-00040, SRG-OS-000730-GPOS-00190
stigidOL07-00-010190
stigrefSV-221676r1015173_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-OL07-00-010190
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_maxclassrepeat
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_maxclassrepeat # promote to variable
  set_fact:
    var_password_pam_maxclassrepeat: !!str 4
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
    Characters from Same Character Class - Check if /etc/pam.d/system-auth file is
    present
  ansible.builtin.stat:
    path: /etc/pam.d/system-auth
  register: result_pam_file_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-010190
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_maxclassrepeat
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
    Characters from Same Character Class - Check the proper remediation for the system
  block:

  - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
      Characters from Same Character Class - Define the PAM file to be edited as a
      local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
      Characters from Same Character Class - Check if system relies on authselect
      tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
      Characters from Same Character Class - Ensure authselect custom profile is used
      if authselect is present
    block:

    - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
        Characters from Same Character Class - Check integrity of authselect current
        profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
        Characters from Same Character Class - Informative message based on the authselect
        integrity check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
        Characters from Same Character Class - Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
        Characters from Same Character Class - Define the current authselect profile
        as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
        Characters from Same Character Class - Define the new authselect custom profile
        as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
        Characters from Same Character Class - Get authselect current features to
        also enable them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
        Characters from Same Character Class - Check if any custom profile with the
        same name was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
        Characters from Same Character Class - Create an authselect custom profile
        based on the current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
        Characters from Same Character Class - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
        Characters from Same Character Class - Ensure the authselect custom profile
        is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
        Characters from Same Character Class - Restore the authselect features in
        the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
        Characters from Same Character Class - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
        Characters from Same Character Class - Change the PAM file to be edited according
        to the custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
      Characters from Same Character Class - Define a fact for control already filtered
      in case filters are used
    ansible.builtin.set_fact:
      pam_module_control: ''

  - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
      Characters from Same Character Class - Ensure the "maxclassrepeat" option from
      "pam_pwquality.so" is not present in {{ pam_file_path }}
    ansible.builtin.replace:
      dest: '{{ pam_file_path }}'
      regexp: (.*password.*pam_pwquality.so.*)\bmaxclassrepeat\b=?[0-9a-zA-Z]*(.*)
      replace: \1\2
    register: result_pam_option_removal

  - name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
      Characters from Same Character Class - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - result_pam_option_removal is changed
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_file_present.stat.exists
  tags:
  - DISA-STIG-OL07-00-010190
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_maxclassrepeat
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
    Characters from Same Character Class - Ensure PAM variable maxclassrepeat is set
    accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*maxclassrepeat
    line: maxclassrepeat = {{ var_password_pam_maxclassrepeat }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-010190
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_maxclassrepeat
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_maxclassrepeat='4'





if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bmaxclassrepeat\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bmaxclassrepeat\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^maxclassrepeat")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_maxclassrepeat"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^maxclassrepeat\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^maxclassrepeat\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set Password Maximum Consecutive Repeating Characters   [ref]

The pam_pwquality module's maxrepeat parameter controls requirements for consecutive repeating characters. When set to a positive number, it will reject passwords which contain more than that number of consecutive characters. Modify the maxrepeat setting in /etc/security/pwquality.conf to equal 3 to prevent a run of (3 + 1) or more identical characters.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.

Passwords with excessive repeating characters may be more vulnerable to password-guessing attacks.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_maxrepeat
References:
cis-csc1, 12, 15, 16, 5
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-004066
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), CM-6(a), IA-5(4)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
os-srgSRG-OS-000072-GPOS-00040
stigidOL07-00-010180
stigrefSV-221675r1015172_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-OL07-00-010180
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_maxrepeat
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_maxrepeat # promote to variable
  set_fact:
    var_password_pam_maxrepeat: !!str 3
  tags:
    - always

- name: Set Password Maximum Consecutive Repeating Characters - Check if /etc/pam.d/system-auth
    file is present
  ansible.builtin.stat:
    path: /etc/pam.d/system-auth
  register: result_pam_file_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-010180
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_maxrepeat
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Password Maximum Consecutive Repeating Characters - Check the proper remediation
    for the system
  block:

  - name: Set Password Maximum Consecutive Repeating Characters - Define the PAM file
      to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: Set Password Maximum Consecutive Repeating Characters - Check if system
      relies on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Set Password Maximum Consecutive Repeating Characters - Ensure authselect
      custom profile is used if authselect is present
    block:

    - name: Set Password Maximum Consecutive Repeating Characters - Check integrity
        of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Set Password Maximum Consecutive Repeating Characters - Informative message
        based on the authselect integrity check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Set Password Maximum Consecutive Repeating Characters - Get authselect
        current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Set Password Maximum Consecutive Repeating Characters - Define the current
        authselect profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Set Password Maximum Consecutive Repeating Characters - Define the new
        authselect custom profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Set Password Maximum Consecutive Repeating Characters - Get authselect
        current features to also enable them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Set Password Maximum Consecutive Repeating Characters - Check if any custom
        profile with the same name was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Set Password Maximum Consecutive Repeating Characters - Create an authselect
        custom profile based on the current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Set Password Maximum Consecutive Repeating Characters - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Set Password Maximum Consecutive Repeating Characters - Ensure the authselect
        custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Set Password Maximum Consecutive Repeating Characters - Restore the authselect
        features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Set Password Maximum Consecutive Repeating Characters - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Set Password Maximum Consecutive Repeating Characters - Change the PAM
        file to be edited according to the custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Set Password Maximum Consecutive Repeating Characters - Define a fact for
      control already filtered in case filters are used
    ansible.builtin.set_fact:
      pam_module_control: ''

  - name: Set Password Maximum Consecutive Repeating Characters - Ensure the "maxrepeat"
      option from "pam_pwquality.so" is not present in {{ pam_file_path }}
    ansible.builtin.replace:
      dest: '{{ pam_file_path }}'
      regexp: (.*password.*pam_pwquality.so.*)\bmaxrepeat\b=?[0-9a-zA-Z]*(.*)
      replace: \1\2
    register: result_pam_option_removal

  - name: Set Password Maximum Consecutive Repeating Characters - Ensure authselect
      changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - result_pam_option_removal is changed
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_file_present.stat.exists
  tags:
  - DISA-STIG-OL07-00-010180
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_maxrepeat
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Password Maximum Consecutive Repeating Characters - Ensure PAM variable
    maxrepeat is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*maxrepeat
    line: maxrepeat = {{ var_password_pam_maxrepeat }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-010180
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_maxrepeat
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_maxrepeat='3'





if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bmaxrepeat\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bmaxrepeat\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^maxrepeat")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_maxrepeat"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^maxrepeat\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^maxrepeat\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Length   [ref]

The pam_pwquality module's minlen parameter controls requirements for minimum characters required in a password. Add minlen=12 after pam_pwquality to set minimum password length requirements.
Rationale:
The shorter the password, the lower the number of possible combinations that need to be tested before the password is compromised.
Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password length is one factor of several that helps to determine strength and how long it takes to crack a password. Use of more characters in a password helps to exponentially increase the time and/or resources required to compromise the password.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_minlen
References:
cis-csc1, 12, 15, 16, 5
cjis5.6.2.1.1
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-004066
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(a), CM-6(a), IA-5(4)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
osppFMT_SMF_EXT.1
pcidssReq-8.2.3
os-srgSRG-OS-000078-GPOS-00046
stigidOL07-00-010280
anssiR31, R68
pcidss48.3.6, 8.3
stigrefSV-221686r1015181_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.6.2.1.1
  - DISA-STIG-OL07-00-010280
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.6
  - accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_minlen # promote to variable
  set_fact:
    var_password_pam_minlen: !!str 12
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Length - Check if /etc/pam.d/system-auth
    file is present
  ansible.builtin.stat:
    path: /etc/pam.d/system-auth
  register: result_pam_file_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CJIS-5.6.2.1.1
  - DISA-STIG-OL07-00-010280
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.6
  - accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure PAM Enforces Password Requirements - Minimum Length - Check the proper
    remediation for the system
  block:

  - name: Ensure PAM Enforces Password Requirements - Minimum Length - Define the
      PAM file to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: Ensure PAM Enforces Password Requirements - Minimum Length - Check if system
      relies on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Ensure PAM Enforces Password Requirements - Minimum Length - Ensure authselect
      custom profile is used if authselect is present
    block:

    - name: Ensure PAM Enforces Password Requirements - Minimum Length - Check integrity
        of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Ensure PAM Enforces Password Requirements - Minimum Length - Informative
        message based on the authselect integrity check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Ensure PAM Enforces Password Requirements - Minimum Length - Get authselect
        current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Ensure PAM Enforces Password Requirements - Minimum Length - Define the
        current authselect profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Length - Define the
        new authselect custom profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Length - Get authselect
        current features to also enable them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Length - Check if
        any custom profile with the same name was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Length - Create an
        authselect custom profile based on the current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Ensure PAM Enforces Password Requirements - Minimum Length - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Minimum Length - Ensure the
        authselect custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Minimum Length - Restore the
        authselect features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Ensure PAM Enforces Password Requirements - Minimum Length - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Ensure PAM Enforces Password Requirements - Minimum Length - Change the
        PAM file to be edited according to the custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Ensure PAM Enforces Password Requirements - Minimum Length - Define a fact
      for control already filtered in case filters are used
    ansible.builtin.set_fact:
      pam_module_control: ''

  - name: Ensure PAM Enforces Password Requirements - Minimum Length - Ensure the
      "minlen" option from "pam_pwquality.so" is not present in {{ pam_file_path }}
    ansible.builtin.replace:
      dest: '{{ pam_file_path }}'
      regexp: (.*password.*pam_pwquality.so.*)\bminlen\b=?[0-9a-zA-Z]*(.*)
      replace: \1\2
    register: result_pam_option_removal

  - name: Ensure PAM Enforces Password Requirements - Minimum Length - Ensure authselect
      changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - result_pam_option_removal is changed
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_file_present.stat.exists
  tags:
  - CJIS-5.6.2.1.1
  - DISA-STIG-OL07-00-010280
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.6
  - accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure PAM Enforces Password Requirements - Minimum Length - Ensure PAM variable
    minlen is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*minlen
    line: minlen = {{ var_password_pam_minlen }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CJIS-5.6.2.1.1
  - DISA-STIG-OL07-00-010280
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.6
  - accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_minlen='12'





if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bminlen\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bminlen\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^minlen")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_minlen"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^minlen\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^minlen\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Special Characters   [ref]

The pam_pwquality module's ocredit= parameter controls requirements for usage of special (or "other") characters in a password. When set to a negative number, any password will be required to contain that many special characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each special character. Modify the ocredit setting in /etc/security/pwquality.conf to equal -1 to require use of a special character in passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised. Requiring a minimum number of special characters makes password guessing attacks more difficult by ensuring a larger search space.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_ocredit
References:
cis-csc1, 12, 15, 16, 5
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-004066
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(a), CM-6(a), IA-5(4)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
osppFMT_SMF_EXT.1
os-srgSRG-OS-000266-GPOS-00101
stigidOL07-00-010150
anssiR31
stigrefSV-221672r1015169_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-OL07-00-010150
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_ocredit # promote to variable
  set_fact:
    var_password_pam_ocredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Special Characters - Check
    if /etc/pam.d/system-auth file is present
  ansible.builtin.stat:
    path: /etc/pam.d/system-auth
  register: result_pam_file_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-010150
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure PAM Enforces Password Requirements - Minimum Special Characters - Check
    the proper remediation for the system
  block:

  - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters -
      Define the PAM file to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters -
      Check if system relies on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters -
      Ensure authselect custom profile is used if authselect is present
    block:

    - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters
        - Check integrity of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters
        - Informative message based on the authselect integrity check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters
        - Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters
        - Define the current authselect profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters
        - Define the new authselect custom profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters
        - Get authselect current features to also enable them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters
        - Check if any custom profile with the same name was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters
        - Create an authselect custom profile based on the current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters
        - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters
        - Ensure the authselect custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters
        - Restore the authselect features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters
        - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters
        - Change the PAM file to be edited according to the custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters -
      Define a fact for control already filtered in case filters are used
    ansible.builtin.set_fact:
      pam_module_control: ''

  - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters -
      Ensure the "ocredit" option from "pam_pwquality.so" is not present in {{ pam_file_path
      }}
    ansible.builtin.replace:
      dest: '{{ pam_file_path }}'
      regexp: (.*password.*pam_pwquality.so.*)\bocredit\b=?[0-9a-zA-Z]*(.*)
      replace: \1\2
    register: result_pam_option_removal

  - name: Ensure PAM Enforces Password Requirements - Minimum Special Characters -
      Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - result_pam_option_removal is changed
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_file_present.stat.exists
  tags:
  - DISA-STIG-OL07-00-010150
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure PAM Enforces Password Requirements - Minimum Special Characters - Ensure
    PAM variable ocredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*ocredit
    line: ocredit = {{ var_password_pam_ocredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-010150
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_ocredit='-1'





if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bocredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bocredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ocredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_ocredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ocredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^ocredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters   [ref]

The pam_pwquality module's ucredit= parameter controls requirements for usage of uppercase letters in a password. When set to a negative number, any password will be required to contain that many uppercase characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each uppercase character. Modify the ucredit setting in /etc/security/pwquality.conf to require the use of an uppercase character in passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_ucredit
References:
cis-csc1, 12, 15, 16, 5
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-004066
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(a), CM-6(a), IA-5(4)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
osppFMT_SMF_EXT.1
pcidssReq-8.2.3
os-srgSRG-OS-000069-GPOS-00037, SRG-OS-000070-GPOS-00038
stigidOL07-00-010120
anssiR31
stigrefSV-221669r1015166_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-OL07-00-010120
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_ucredit # promote to variable
  set_fact:
    var_password_pam_ucredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters -
    Check if /etc/pam.d/system-auth file is present
  ansible.builtin.stat:
    path: /etc/pam.d/system-auth
  register: result_pam_file_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-010120
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters -
    Check the proper remediation for the system
  block:

  - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
      - Define the PAM file to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
      - Check if system relies on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
      - Ensure authselect custom profile is used if authselect is present
    block:

    - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
        - Check integrity of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
        - Informative message based on the authselect integrity check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
        - Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
        - Define the current authselect profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
        - Define the new authselect custom profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
        - Get authselect current features to also enable them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
        - Check if any custom profile with the same name was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
        - Create an authselect custom profile based on the current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
        - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
        - Ensure the authselect custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
        - Restore the authselect features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
        - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
        - Change the PAM file to be edited according to the custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
      - Define a fact for control already filtered in case filters are used
    ansible.builtin.set_fact:
      pam_module_control: ''

  - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
      - Ensure the "ucredit" option from "pam_pwquality.so" is not present in {{ pam_file_path
      }}
    ansible.builtin.replace:
      dest: '{{ pam_file_path }}'
      regexp: (.*password.*pam_pwquality.so.*)\bucredit\b=?[0-9a-zA-Z]*(.*)
      replace: \1\2
    register: result_pam_option_removal

  - name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters
      - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - result_pam_option_removal is changed
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_file_present.stat.exists
  tags:
  - DISA-STIG-OL07-00-010120
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters -
    Ensure PAM variable ucredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*ucredit
    line: ucredit = {{ var_password_pam_ucredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-010120
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_ucredit='-1'





if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bucredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bucredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ucredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_ucredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ucredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^ucredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Protect Physical Console Access   Group contains 2 groups and 6 rules
[ref]   It is impossible to fully protect a system from an attacker with physical access, so securing the space in which the system is located should be considered a necessary step. However, there are some steps which, if taken, make it more difficult for an attacker to quickly or undetectably modify a system from its console.
Group   Configure Screen Locking   Group contains 1 group and 1 rule
[ref]   When a user must temporarily leave an account logged-in, screen locking should be employed to prevent passersby from abusing the account. User education and training is particularly important for screen locking to be effective, and policies can be implemented to reinforce this.

Automatic screen locking is only meant as a safeguard for those cases where a user forgot to lock the screen.
Group   Configure Console Screen Locking   Group contains 1 rule
[ref]   A console screen locking mechanism is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not logout because of the temporary nature of the absence. Rather than relying on the user to manually lock their operation system session prior to vacating the vicinity, operating systems need to be able to identify when a user's session has idled and take action to initiate the session lock.

Rule   Install the screen Package   [ref]

To enable console screen locking, install the screen package. The screen package can be installed with the following command:
$ sudo yum install screen
Instruct users to begin new terminal sessions with the following command:
$ screen
The console can now be locked with the following key combination:
ctrl+a x
Rationale:
A session time-out lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not logout because of the temporary nature of the absence. Rather than relying on the user to manually lock their operation system session prior to vacating the vicinity, operating systems need to be able to identify when a user's session has idled and take action to initiate the session lock.

The screen package allows for a session lock to be implemented and configured.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_screen_installed
References:
cis-csc1, 12, 15, 16
cobit5DSS05.04, DSS05.10, DSS06.10
cui3.1.10
disaCCI-000057, CCI-000058
isa-62443-20094.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nistCM-6(a)
nist-csfPR.AC-7
osppFMT_MOF_EXT.1
os-srgSRG-OS-000029-GPOS-00010
stigidOL07-00-010090
stigrefSV-255900r958402_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include install_screen

class install_screen {
  package { 'screen':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-OL07-00-010090
  - NIST-800-171-3.1.10
  - NIST-800-53-CM-6(a)
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_screen_installed

- name: Ensure screen is installed
  package:
    name: screen
    state: present
  when: '"kernel" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-010090
  - NIST-800-171-3.1.10
  - NIST-800-53-CM-6(a)
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_screen_installed


[[packages]]
name = "screen"
version = "*"

Complexity:low
Disruption:low
Reboot:false
Strategy:enable

package --add=screen

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

if ! rpm -q --quiet "screen" ; then
    yum install -y "screen"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable debug-shell SystemD Service   [ref]

SystemD's debug-shell service is intended to diagnose SystemD related boot issues with various systemctl commands. Once enabled and following a system reboot, the root shell will be available on tty9 which is access by pressing CTRL-ALT-F9. The debug-shell service should only be used for SystemD related issues and should otherwise be disabled.

By default, the debug-shell SystemD service is already disabled. The debug-shell service can be disabled with the following command:
$ sudo systemctl mask --now debug-shell.service
Rationale:
This prevents attackers with physical access from trivially bypassing security on the machine through valid troubleshooting configurations and gaining root access when the system is rebooted.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_service_debug-shell_disabled
References:
cui3.4.5
disaCCI-000366, CCI-002235
hipaa164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
nistCM-6
osppFIA_UAU.1
os-srgSRG-OS-000324-GPOS-00125, SRG-OS-000480-GPOS-00227

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include disable_debug-shell

class disable_debug-shell {
  service {'debug-shell':
    enable => false,
    ensure => 'stopped',
  }
}

Complexity:low
Disruption:low
Reboot:false
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-171-3.4.5
  - NIST-800-53-CM-6
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_debug-shell_disabled

- name: Disable debug-shell SystemD Service - Collect systemd Services Present in
    the System
  ansible.builtin.command: systemctl -q list-unit-files --type service
  register: service_exists
  changed_when: false
  failed_when: service_exists.rc not in [0, 1]
  check_mode: false
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.4.5
  - NIST-800-53-CM-6
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_debug-shell_disabled

- name: Disable debug-shell SystemD Service - Ensure debug-shell.service is Masked
  ansible.builtin.systemd:
    name: debug-shell.service
    state: stopped
    enabled: false
    masked: true
  when:
  - '"kernel" in ansible_facts.packages'
  - service_exists.stdout_lines is search("debug-shell.service", multiline=True)
  tags:
  - NIST-800-171-3.4.5
  - NIST-800-53-CM-6
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_debug-shell_disabled

- name: Unit Socket Exists - debug-shell.socket
  ansible.builtin.command: systemctl -q list-unit-files debug-shell.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.4.5
  - NIST-800-53-CM-6
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_debug-shell_disabled

- name: Disable debug-shell SystemD Service - Disable Socket debug-shell
  ansible.builtin.systemd:
    name: debug-shell.socket
    enabled: false
    state: stopped
    masked: true
  when:
  - '"kernel" in ansible_facts.packages'
  - socket_file_exists.stdout_lines is search("debug-shell.socket", multiline=True)
  tags:
  - NIST-800-171-3.4.5
  - NIST-800-53-CM-6
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_debug-shell_disabled


[customizations.services]
masked = ["debug-shell"]

Complexity:low
Disruption:low
Reboot:false
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'debug-shell.service'
"$SYSTEMCTL_EXEC" disable 'debug-shell.service'
"$SYSTEMCTL_EXEC" mask 'debug-shell.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files debug-shell.socket; then
    "$SYSTEMCTL_EXEC" stop 'debug-shell.socket'
    "$SYSTEMCTL_EXEC" mask 'debug-shell.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'debug-shell.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Ctrl-Alt-Del Burst Action   [ref]

By default, SystemD will reboot the system if the Ctrl-Alt-Del key sequence is pressed Ctrl-Alt-Delete more than 7 times in 2 seconds.

To configure the system to ignore the CtrlAltDelBurstAction setting, add or modify the following to /etc/systemd/system.conf:
CtrlAltDelBurstAction=none
Warning:  Disabling the Ctrl-Alt-Del key sequence in /etc/init/control-alt-delete.conf DOES NOT disable the Ctrl-Alt-Del key sequence if running in runlevel 6 (e.g. in GNOME, KDE, etc.)! The Ctrl-Alt-Del key sequence will only be disabled if running in the non-graphical runlevel 3.
Rationale:
A locally logged-in user who presses Ctrl-Alt-Del, when at the console, can reboot the system. If accidentally pressed, as could happen in the case of mixed OS environment, this can create the risk of short-term loss of availability of systems due to unintentional reboot.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_disable_ctrlaltdel_burstaction
References:
cis-csc12, 13, 14, 15, 16, 18, 3, 5
cobit5APO01.06, DSS05.04, DSS05.07, DSS06.02
cui3.4.5
disaCCI-000366, CCI-002235
hipaa164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-20094.3.3.7.3
isa-62443-2013SR 2.1, SR 5.2
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistCM-6(a), AC-6(1), CM-6(a)
nist-csfPR.AC-4, PR.DS-5
osppFAU_GEN.1.2
os-srgSRG-OS-000324-GPOS-00125, SRG-OS-000480-GPOS-00227

Complexity:low
Disruption:low
Reboot:false
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(a)
  - disable_ctrlaltdel_burstaction
  - disable_strategy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed

- name: Disable Ctrl-Alt-Del Burst Action
  lineinfile:
    dest: /etc/systemd/system.conf
    state: present
    regexp: ^CtrlAltDelBurstAction
    line: CtrlAltDelBurstAction=none
    create: true
  when:
  - '"kernel" in ansible_facts.packages'
  - '"systemd" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(a)
  - disable_ctrlaltdel_burstaction
  - disable_strategy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed

# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel && { rpm --quiet -q systemd; }; then

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^CtrlAltDelBurstAction=")

# shellcheck disable=SC2059
printf -v formatted_output "%s=%s" "$stripped_key" "none"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^CtrlAltDelBurstAction=\\>" "/etc/systemd/system.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^CtrlAltDelBurstAction=\\>.*/$escaped_formatted_output/gi" "/etc/systemd/system.conf"
else
    if [[ -s "/etc/systemd/system.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/systemd/system.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/systemd/system.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/systemd/system.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Ctrl-Alt-Del Reboot Activation   [ref]

By default, SystemD will reboot the system if the Ctrl-Alt-Del key sequence is pressed.

To configure the system to ignore the Ctrl-Alt-Del key sequence from the command line instead of rebooting the system, do either of the following:
ln -sf /dev/null /etc/systemd/system/ctrl-alt-del.target
or
systemctl mask ctrl-alt-del.target


Do not simply delete the /usr/lib/systemd/system/ctrl-alt-del.service file, as this file may be restored during future system updates.
Rationale:
A locally logged-in user who presses Ctrl-Alt-Del, when at the console, can reboot the system. If accidentally pressed, as could happen in the case of mixed OS environment, this can create the risk of short-term loss of availability of systems due to unintentional reboot.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_disable_ctrlaltdel_reboot
References:
cis-csc12, 13, 14, 15, 16, 18, 3, 5
cobit5APO01.06, DSS05.04, DSS05.07, DSS06.02
cui3.4.5
disaCCI-000366, CCI-002235
hipaa164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-20094.3.3.7.3
isa-62443-2013SR 2.1, SR 5.2
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistCM-6(a), AC-6(1)
nist-csfPR.AC-4, PR.DS-5
osppFAU_GEN.1.2
os-srgSRG-OS-000324-GPOS-00125, SRG-OS-000480-GPOS-00227
stigidOL07-00-020230
stigrefSV-221717r991589_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-OL07-00-020230
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - disable_ctrlaltdel_reboot
  - disable_strategy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed

- name: Disable Ctrl-Alt-Del Reboot Activation
  systemd:
    name: ctrl-alt-del.target
    force: true
    masked: true
    state: stopped
  when: '"kernel" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-020230
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - disable_ctrlaltdel_reboot
  - disable_strategy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed

# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

if [[ "$OSCAP_BOOTC_BUILD" == "YES" ]] ; then
    systemctl disable ctrl-alt-del.target
    systemctl mask ctrl-alt-del.target
else
    systemctl disable --now ctrl-alt-del.target
    systemctl mask --now ctrl-alt-del.target
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify that Interactive Boot is Disabled   [ref]

Oracle Linux 7 systems support an "interactive boot" option that can be used to prevent services from being started. On a Oracle Linux 7 system, interactive boot can be enabled by providing a 1, yes, true, or on value to the systemd.confirm_spawn kernel argument in /etc/default/grub. Remove any instance of
systemd.confirm_spawn=(1|yes|true|on)
from the kernel arguments in that file to disable interactive boot. Recovery booting must also be disabled. Confirm that GRUB_DISABLE_RECOVERY=true is set in /etc/default/grub. It is also required to change the runtime configuration, run:
/sbin/grubby --update-kernel=ALL --remove-args="systemd.confirm_spawn"
grub2-mkconfig -o /boot/grub2/grub.cfg
Rationale:
Using interactive or recovery boot, the console user could disable auditing, firewalls, or other services, weakening system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_grub2_disable_interactive_boot
References:
cis-csc11, 12, 14, 15, 16, 18, 3, 5
cobit5DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06
cui3.1.2, 3.4.5
disaCCI-000366
hipaa164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7
iso27001-2013A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nistSC-2(1), CM-6(a)
nist-csfPR.AC-4, PR.AC-6, PR.PT-3
os-srgSRG-OS-000480-GPOS-00227

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-171-3.1.2
  - NIST-800-171-3.4.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-2(1)
  - grub2_disable_interactive_boot
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Verify GRUB_DISABLE_RECOVERY=true
  lineinfile:
    path: /etc/default/grub
    regexp: ^GRUB_DISABLE_RECOVERY=.*
    line: GRUB_DISABLE_RECOVERY=true
    state: present
  when:
  - '"kernel" in ansible_facts.packages'
  - '"grub2-common" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.2
  - NIST-800-171-3.4.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-2(1)
  - grub2_disable_interactive_boot
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Verify that Interactive Boot is Disabled in /etc/default/grub
  replace:
    dest: /etc/default/grub
    regexp: systemd.confirm_spawn(=(1|yes|true|on)|\b)
    replace: systemd.confirm_spawn=no
  when:
  - '"kernel" in ansible_facts.packages'
  - '"grub2-common" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.2
  - NIST-800-171-3.4.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-2(1)
  - grub2_disable_interactive_boot
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Verify that Interactive Boot is Disabled (runtime)
  command: /sbin/grubby --update-kernel=ALL --remove-args="systemd.confirm_spawn"
  when:
  - '"kernel" in ansible_facts.packages'
  - '"grub2-common" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.2
  - NIST-800-171-3.4.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-2(1)
  - grub2_disable_interactive_boot
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Regen grub.cfg handle updated GRUB_DISABLE_RECOVERY and confirm_spawn
  command: grub2-mkconfig -o  /boot/grub2/grub.cfg
  when:
  - '"kernel" in ansible_facts.packages'
  - '"grub2-common" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.2
  - NIST-800-171-3.4.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-2(1)
  - grub2_disable_interactive_boot
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel && { rpm --quiet -q grub2-common; }; then

# Verify that Interactive Boot is Disabled in /etc/default/grub
CONFIRM_SPAWN_YES="systemd.confirm_spawn\(=\(1\|yes\|true\|on\)\|\b\)"
CONFIRM_SPAWN_NO="systemd.confirm_spawn=no"

if grep -q "\(GRUB_CMDLINE_LINUX\|GRUB_CMDLINE_LINUX_DEFAULT\)" /etc/default/grub
then
	sed -i "s/${CONFIRM_SPAWN_YES}/${CONFIRM_SPAWN_NO}/" /etc/default/grub
fi

# make sure GRUB_DISABLE_RECOVERY=true
if grep -q '^GRUB_DISABLE_RECOVERY=.*'  '/etc/default/grub' ; then
       # modify the GRUB command-line if an GRUB_DISABLE_RECOVERY= arg already exists
       sed -i 's/GRUB_DISABLE_RECOVERY=.*/GRUB_DISABLE_RECOVERY=true/' /etc/default/grub
else
       # no GRUB_DISABLE_RECOVERY=arg is present, append it to file
       echo "GRUB_DISABLE_RECOVERY=true"  >> '/etc/default/grub'
fi



# Remove 'systemd.confirm_spawn' kernel argument also from runtime settings
/sbin/grubby --update-kernel=ALL --remove-args="systemd.confirm_spawn"


#Regen grub.cfg handle updated GRUB_DISABLE_RECOVERY and confirm_spawn
grub2-mkconfig -o /boot/grub2/grub.cfg

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Require Authentication for Single User Mode   [ref]

Single-user mode is intended as a system recovery method, providing a single user root access to the system by providing a boot option at startup.

By default, single-user mode is protected by requiring a password and is set in /usr/lib/systemd/system/rescue.service.
Rationale:
This prevents attackers with physical access from trivially bypassing security on the machine and gaining root access. Such accesses are further prevented by configuring the bootloader password.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_require_singleuser_auth
References:
cis-csc1, 11, 12, 14, 15, 16, 18, 3, 5
cobit5DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10
cui3.1.1, 3.4.5
disaCCI-000213
hipaa164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3
nistIA-2, AC-3, CM-6(a)
nist-csfPR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3
osppFIA_UAU.1
os-srgSRG-OS-000080-GPOS-00048
stigidOL07-00-010481
stigrefSV-221699r958472_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-OL07-00-010481
  - NIST-800-171-3.1.1
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - require_singleuser_auth
  - restrict_strategy

- name: Require single user mode password
  lineinfile:
    create: true
    dest: /usr/lib/systemd/system/rescue.service
    regexp: ^#?ExecStart=
    line: ExecStart=-/bin/sh -c "/sbin/sulogin; /usr/bin/systemctl --fail --no-block
      default"
  when: '"kernel" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-010481
  - NIST-800-171-3.1.1
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - require_singleuser_auth
  - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

found=false

# set value in all files if they contain section or key
for f in $(echo -n "/etc/systemd/system/rescue.service.d/10-oscap.conf"); do
    if [ ! -e "$f" ]; then
        continue
    fi

    # find key in section and change value
    if grep -qzosP "[[:space:]]*\[Service\]([^\n\[]*\n+)+?[[:space:]]*ExecStart" "$f"; then

            sed -i "s/ExecStart[^(\n)]*/ExecStart=-/bin/sh -c "/sbin/sulogin; /usr/bin/systemctl --fail --no-block default"/" "$f"

            found=true

    # find section and add key = value to it
    elif grep -qs "[[:space:]]*\[Service\]" "$f"; then

            sed -i "/[[:space:]]*\[Service\]/a ExecStart=-/bin/sh -c "/sbin/sulogin; /usr/bin/systemctl --fail --no-block default"" "$f"

            found=true
    fi
done

# if section not in any file, append section with key = value to FIRST file in files parameter
if ! $found ; then
    file=$(echo "/etc/systemd/system/rescue.service.d/10-oscap.conf" | cut -f1 -d ' ')
    mkdir -p "$(dirname "$file")"

    echo -e "[Service]\nExecStart=-/bin/sh -c "/sbin/sulogin; /usr/bin/systemctl --fail --no-block default"" >> "$file"

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Protect Accounts by Restricting Password-Based Login   Group contains 3 groups and 3 rules
[ref]   Conventionally, Unix shell accounts are accessed by providing a username and password to a login program, which tests these values for correctness using the /etc/passwd and /etc/shadow files. Password-based login is vulnerable to guessing of weak passwords, and to sniffing and man-in-the-middle attacks against passwords entered over a network or at an insecure console. Therefore, mechanisms for accessing accounts by entering usernames and passwords should be restricted to those which are operationally necessary.
Group   Set Password Expiration Parameters   Group contains 1 rule
[ref]   The file /etc/login.defs controls several password-related settings. Programs such as passwd, su, and login consult /etc/login.defs to determine behavior with regard to password aging, expiration warnings, and length. See the man page login.defs(5) for more information.

Users should be forced to change their passwords, in order to decrease the utility of compromised passwords. However, the need to change passwords often should be balanced against the risk that users will reuse or write down passwords if forced to change them too often. Forcing password changes every 90-360 days, depending on the environment, is recommended. Set the appropriate value as PASS_MAX_DAYS and apply it to existing accounts with the -M flag.

The PASS_MIN_DAYS (-m) setting prevents password changes for 7 days after the first change, to discourage password cycling. If you use this setting, train users to contact an administrator for an emergency password change in case a new password becomes compromised. The PASS_WARN_AGE (-W) setting gives users 7 days of warnings at login time that their passwords are about to expire.

For example, for each existing human user USER, expiration parameters could be adjusted to a 180 day maximum password age, 7 day minimum password age, and 7 day warning period with the following command:
$ sudo chage -M 180 -m 7 -W 7 USER
Group   Verify Proper Storage and Existence of Password Hashes   Group contains 1 rule
[ref]   By default, password hashes for local accounts are stored in the second field (colon-separated) in /etc/shadow. This file should be readable only by processes running with root credentials, preventing users from casually accessing others' password hashes and attempting to crack them. However, it remains possible to misconfigure the system and store password hashes in world-readable files such as /etc/passwd, or to even store passwords themselves in plaintext on the system. Using system-provided tools for password change/creation should allow administrators to avoid such misconfiguration.

Rule   Prevent Login to Accounts With Empty Password   [ref]

If an account is configured for password authentication but does not have an assigned password, it may be possible to log into the account without authentication. Remove any instances of the nullok in /etc/pam.d/system-auth and /etc/pam.d/password-auth to prevent logins with empty passwords.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. Note that this rule is not applicable for systems running within a container. Having user with empty password within a container is not considered a risk, because it should not be possible to directly login into a container anyway.
Rationale:
If an account has an empty password, anyone could log in and run commands with the privileges of that account. Accounts with empty passwords should never be used in operational environments.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_no_empty_passwords
References:
cis-csc1, 12, 13, 14, 15, 16, 18, 3, 5
cjis5.5.2
cobit5APO01.06, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.10
cui3.1.1, 3.1.5
disaCCI-000366
hipaa164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 5.2
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nistIA-5(1)(a), IA-5(c), CM-6(a)
nist-csfPR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5
osppFIA_UAU.1
pcidssReq-8.2.3
os-srgSRG-OS-000480-GPOS-00227
stigidOL07-00-010290
pcidss48.3.1, 8.3
stigrefSV-221687r991589_rule

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.5.2
  - DISA-STIG-OL07-00-010290
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.1
  - configure_strategy
  - high_severity
  - low_complexity
  - medium_disruption
  - no_empty_passwords
  - no_reboot_needed

- name: Prevent Login to Accounts With Empty Password - Check if system relies on
    authselect
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.5.2
  - DISA-STIG-OL07-00-010290
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.1
  - configure_strategy
  - high_severity
  - low_complexity
  - medium_disruption
  - no_empty_passwords
  - no_reboot_needed

- name: Prevent Login to Accounts With Empty Password - Remediate using authselect
  block:

  - name: Prevent Login to Accounts With Empty Password - Check integrity of authselect
      current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Prevent Login to Accounts With Empty Password - Informative message based
      on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Prevent Login to Accounts With Empty Password - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Prevent Login to Accounts With Empty Password - Ensure "without-nullok"
      feature is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature without-nullok
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("without-nullok")

  - name: Prevent Login to Accounts With Empty Password - Ensure authselect changes
      are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"kernel" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CJIS-5.5.2
  - DISA-STIG-OL07-00-010290
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.1
  - configure_strategy
  - high_severity
  - low_complexity
  - medium_disruption
  - no_empty_passwords
  - no_reboot_needed

- name: Prevent Login to Accounts With Empty Password - Remediate directly editing
    PAM files
  ansible.builtin.replace:
    dest: '{{ item }}'
    regexp: nullok
  loop:
  - /etc/pam.d/system-auth
  - /etc/pam.d/password-auth
  when:
  - '"kernel" in ansible_facts.packages'
  - not result_authselect_present.stat.exists
  tags:
  - CJIS-5.5.2
  - DISA-STIG-OL07-00-010290
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3
  - PCI-DSSv4-8.3.1
  - configure_strategy
  - high_severity
  - low_complexity
  - medium_disruption
  - no_empty_passwords
  - no_reboot_needed

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%23%20Generated%20by%20authselect%20on%20Sat%20Oct%2027%2014%3A59%3A36%202018%0A%23%20Do%20not%20modify%20this%20file%20manually.%0A%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_env.so%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_faildelay.so%20delay%3D2000000%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_fprintd.so%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20try_first_pass%0Aauth%20%20%20%20%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet_success%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20forward_pass%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3C%201000%20quiet%0Aaccount%20%20%20%20%20%5Bdefault%3Dbad%20success%3Dok%20user_unknown%3Dignore%5D%20pam_sss.so%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_permit.so%0A%0Apassword%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_pwquality.so%20try_first_pass%20local_users_only%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20sha512%20shadow%20try_first_pass%20use_authtok%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20use_authtok%0Apassword%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_keyinit.so%20revoke%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_limits.so%0A-session%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_systemd.so%0Asession%20%20%20%20%20%5Bsuccess%3D1%20default%3Dignore%5D%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20service%20in%20crond%20quiet%20use_uid%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%0A
        mode: 0644
        path: /etc/pam.d/password-auth
        overwrite: true
      - contents:
          source: data:,%23%20Generated%20by%20authselect%20on%20Sat%20Oct%2027%2014%3A59%3A36%202018%0A%23%20Do%20not%20modify%20this%20file%20manually.%0A%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_env.so%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_faildelay.so%20delay%3D2000000%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_fprintd.so%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20try_first_pass%0Aauth%20%20%20%20%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet_success%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20forward_pass%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3C%201000%20quiet%0Aaccount%20%20%20%20%20%5Bdefault%3Dbad%20success%3Dok%20user_unknown%3Dignore%5D%20pam_sss.so%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_permit.so%0A%0Apassword%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_pwquality.so%20try_first_pass%20local_users_only%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20sha512%20shadow%20try_first_pass%20use_authtok%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20use_authtok%0Apassword%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_keyinit.so%20revoke%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_limits.so%0A-session%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_systemd.so%0Asession%20%20%20%20%20%5Bsuccess%3D1%20default%3Dignore%5D%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20service%20in%20crond%20quiet%20use_uid%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%0A
        mode: 0644
        path: /etc/pam.d/system-auth
        overwrite: true

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature without-nullok

authselect apply-changes -b
else
    
if grep -qP "^\s*auth\s+sufficient\s+pam_unix.so\s.*\bnullok\b" "/etc/pam.d/system-auth"; then
    sed -i -E --follow-symlinks "s/(.*auth.*sufficient.*pam_unix.so.*)\snullok=?[[:alnum:]]*(.*)/\1\2/g" "/etc/pam.d/system-auth"
fi
    
if grep -qP "^\s*password\s+sufficient\s+pam_unix.so\s.*\bnullok\b" "/etc/pam.d/system-auth"; then
    sed -i -E --follow-symlinks "s/(.*password.*sufficient.*pam_unix.so.*)\snullok=?[[:alnum:]]*(.*)/\1\2/g" "/etc/pam.d/system-auth"
fi
    
if grep -qP "^\s*auth\s+sufficient\s+pam_unix.so\s.*\bnullok\b" "/etc/pam.d/password-auth"; then
    sed -i -E --follow-symlinks "s/(.*auth.*sufficient.*pam_unix.so.*)\snullok=?[[:alnum:]]*(.*)/\1\2/g" "/etc/pam.d/password-auth"
fi
    
if grep -qP "^\s*password\s+sufficient\s+pam_unix.so\s.*\bnullok\b" "/etc/pam.d/password-auth"; then
    sed -i -E --follow-symlinks "s/(.*password.*sufficient.*pam_unix.so.*)\snullok=?[[:alnum:]]*(.*)/\1\2/g" "/etc/pam.d/password-auth"
fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Restrict Root Logins   Group contains 1 rule
[ref]   Direct root logins should be allowed only for emergency use. In normal situations, the administrator should access the system via a unique unprivileged account, and then use su or sudo to execute privileged commands. Discouraging administrators from accessing the root account directly ensures an audit trail in organizations with multiple administrators. Locking down the channels through which root can connect directly also reduces opportunities for password-guessing against the root account. The login program uses the file /etc/securetty to determine which interfaces should allow root logins. The virtual devices /dev/console and /dev/tty* represent the system consoles (accessible via the Ctrl-Alt-F1 through Ctrl-Alt-F6 keyboard sequences on a default installation). The default securetty file also contains /dev/vc/*. These are likely to be deprecated in most environments, but may be retained for compatibility. Root should also be prohibited from connecting via network protocols. Other sections of this document include guidance describing how to prevent root from logging in via SSH.
Group   Secure Session Configuration Files for Login Accounts   Group contains 1 group and 4 rules
[ref]   When a user logs into a Unix account, the system configures the user's session by reading a number of files. Many of these files are located in the user's home directory, and may have weak permissions as a result of user error or misconfiguration. If an attacker can modify or even read certain types of account configuration information, they can often gain full access to the affected user's account. Therefore, it is important to test and correct configuration file permissions for interactive accounts, particularly those of privileged users such as root or system administrators.
Group   Ensure that Users Have Sensible Umask Values   Group contains 3 rules
[ref]   The umask setting controls the default permissions for the creation of new files. With a default umask setting of 077, files and directories created by users will not be readable by any other user on the system. Users who wish to make specific files group- or world-readable can accomplish this by using the chmod command. Additionally, users can make all their files readable to their group by default by setting a umask of 027 in their shell configuration files. If default per-user groups exist (that is, if every user has a default group whose name is the same as that user's username and whose only member is the user), then it may even be safe for users to select a umask of 007, making it very easy to intentionally share files with groups of which the user is a member.

Rule   Ensure the Default Bash Umask is Set Correctly   [ref]

To ensure the default umask for users of the Bash shell is set properly, add or correct the umask setting in /etc/bashrc to read as follows:
umask 027
         
Rationale:
The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_umask_etc_bashrc
References:
cis-csc18
cobit5APO13.01, BAI03.01, BAI03.02, BAI03.03
disaCCI-000366
isa-62443-20094.3.4.3.3
iso27001-2013A.14.1.1, A.14.2.1, A.14.2.5, A.6.1.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistAC-6(1), CM-6(a)
nist-csfPR.IP-2
os-srgSRG-OS-000480-GPOS-00228, SRG-OS-000480-GPOS-00227
anssiR36

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_user_umask # promote to variable
  set_fact:
    var_accounts_user_umask: !!str 027
  tags:
    - always

- name: Check if umask in /etc/bashrc is already set
  ansible.builtin.lineinfile:
    path: /etc/bashrc
    regexp: ^[^#]*\bumask\s+\d+$
    state: absent
  check_mode: true
  changed_when: false
  register: umask_replace
  when: '"bash" in ansible_facts.packages'
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Replace user umask in /etc/bashrc
  ansible.builtin.replace:
    path: /etc/bashrc
    regexp: ^([^#]*\b)umask\s+\d+$
    replace: \g<1>umask {{ var_accounts_user_umask }}
  when:
  - '"bash" in ansible_facts.packages'
  - umask_replace.found > 0
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default umask is Appended Correctly
  ansible.builtin.lineinfile:
    create: true
    path: /etc/bashrc
    line: umask {{ var_accounts_user_umask }}
  when:
  - '"bash" in ansible_facts.packages'
  - umask_replace.found == 0
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q bash; then

var_accounts_user_umask='027'






grep -q "^[^#]*\bumask" /etc/bashrc && \
  sed -i -E -e "s/^([^#]*\bumask)[[:space:]]+[[:digit:]]+/\1 $var_accounts_user_umask/g" /etc/bashrc
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/bashrc
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure the Default C Shell Umask is Set Correctly   [ref]

To ensure the default umask for users of the C shell is set properly, add or correct the umask setting in /etc/csh.cshrc to read as follows:
umask 027
         
Rationale:
The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_umask_etc_csh_cshrc
References:
cis-csc18
cobit5APO13.01, BAI03.01, BAI03.02, BAI03.03
disaCCI-000366
isa-62443-20094.3.4.3.3
iso27001-2013A.14.1.1, A.14.2.1, A.14.2.5, A.6.1.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistAC-6(1), CM-6(a)
nist-csfPR.IP-2
os-srgSRG-OS-000480-GPOS-00228, SRG-OS-000480-GPOS-00227

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value var_accounts_user_umask # promote to variable
  set_fact:
    var_accounts_user_umask: !!str 027
  tags:
    - always

- name: Check if umask in /etc/csh.cshrc is already set
  ansible.builtin.lineinfile:
    path: /etc/csh.cshrc
    regexp: ^(\s*)umask\s+.*
    state: absent
  check_mode: true
  changed_when: false
  register: umask_replace
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_csh_cshrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Replace user umask in /etc/csh.cshrc
  ansible.builtin.replace:
    path: /etc/csh.cshrc
    regexp: ^(\s*)umask(\s+).*
    replace: \g<1>umask\g<2>{{ var_accounts_user_umask }}
  when: umask_replace.found > 0
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_csh_cshrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default umask is Appended Correctly
  ansible.builtin.lineinfile:
    create: true
    path: /etc/csh.cshrc
    line: umask {{ var_accounts_user_umask }}
  when: umask_replace.found == 0
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_csh_cshrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy


var_accounts_user_umask='027'


grep -q "^\s*umask" /etc/csh.cshrc && \
  sed -i -E -e "s/^(\s*umask).*/\1 $var_accounts_user_umask/g" /etc/csh.cshrc
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/csh.cshrc
fi

Rule   Ensure the Default Umask is Set Correctly in /etc/profile   [ref]

To ensure the default umask controlled by /etc/profile is set properly, add or correct the umask setting in /etc/profile to read as follows:
umask 027
         
Note that /etc/profile also reads scrips within /etc/profile.d directory. These scripts are also valid files to set umask value. Therefore, they should also be considered during the check and properly remediated, if necessary.
Rationale:
The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_umask_etc_profile
References:
cis-csc18
cobit5APO13.01, BAI03.01, BAI03.02, BAI03.03
disaCCI-000366
isa-62443-20094.3.4.3.3
iso27001-2013A.14.1.1, A.14.2.1, A.14.2.5, A.6.1.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistAC-6(1), CM-6(a)
nist-csfPR.IP-2
os-srgSRG-OS-000480-GPOS-00228, SRG-OS-000480-GPOS-00227
anssiR36

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value var_accounts_user_umask # promote to variable
  set_fact:
    var_accounts_user_umask: !!str 027
  tags:
    - always

- name: Ensure the Default Umask is Set Correctly in /etc/profile - Locate Profile
    Configuration Files Where umask Is Defined
  ansible.builtin.find:
    paths:
    - /etc/profile.d
    patterns:
    - sh.local
    - '*.sh'
    contains: ^[\s]*umask\s+\d+
  register: result_profile_d_files
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default Umask is Set Correctly in /etc/profile - Replace Existing
    umask Value in Files From /etc/profile.d
  ansible.builtin.replace:
    path: '{{ item.path }}'
    regexp: ^(\s*)umask\s+\d+
    replace: \1umask {{ var_accounts_user_umask }}
  loop: '{{ result_profile_d_files.files }}'
  register: result_umask_replaced_profile_d
  when: result_profile_d_files.matched
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default Umask is Set Correctly in /etc/profile - Ensure umask Is
    Set in /etc/profile if Not Already Set Elsewhere
  ansible.builtin.lineinfile:
    create: true
    mode: 420
    path: /etc/profile
    line: umask {{ var_accounts_user_umask }}
  when: not result_profile_d_files.matched
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default Umask is Set Correctly in /etc/profile - Ensure umask Value
    For All Existing umask Definition in /etc/profile
  ansible.builtin.replace:
    path: /etc/profile
    regexp: ^(\s*)umask\s+\d+
    replace: \1umask {{ var_accounts_user_umask }}
  register: result_umask_replaced_profile
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict

var_accounts_user_umask='027'


readarray -t profile_files < <(find /etc/profile.d/ -type f -name '*.sh' -or -name 'sh.local')

for file in "${profile_files[@]}" /etc/profile; do
  grep -qE '^[^#]*umask' "$file" && sed -i -E "s/^(\s*umask\s*)[0-7]+/\1$var_accounts_user_umask/g" "$file"
done

if ! grep -qrE '^[^#]*umask' /etc/profile*; then
  echo "umask $var_accounts_user_umask" >> /etc/profile
fi
Group   GRUB2 bootloader configuration   Group contains 1 group and 2 rules
[ref]   During the boot process, the boot loader is responsible for starting the execution of the kernel and passing options to it. The boot loader allows for the selection of different kernels - possibly on different partitions or media. The default Oracle Linux 7 boot loader for x86 systems is called GRUB2. Options it can pass to the kernel include single-user mode, which provides root access without any authentication, and the ability to disable SELinux. To prevent local users from modifying the boot parameters and endangering security, protect the boot loader configuration with a password and ensure its configuration file's permissions are set properly.
Group   UEFI GRUB2 bootloader configuration   Group contains 1 rule
[ref]   UEFI GRUB2 bootloader configuration
Warning:  UEFI generally uses vfat file systems, which does not support Unix-style permissions managed by chmod command. In this case, in order to change file permissions for files within /boot/efi it is necessary to update the mount options in /etc/fstab file and reboot the system.

Rule   Set the UEFI Boot Loader Password   [ref]

The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings.

Since plaintext passwords are a security risk, generate a hash for the password by running the following command:
# grub2-setpassword
When prompted, enter the password that was selected.

Warning:  To prevent hard-coded passwords, automatic remediation of this control is not available. Remediation must be automated as a component of machine provisioning, or followed manually as outlined above. Also, do NOT manually add the superuser account and password to the grub.cfg file as the grub2-mkconfig command overwrites this file.
Rationale:
Password protection on the boot loader configuration ensures users with physical access cannot trivially alter important bootloader settings. These include which kernel to use, and whether to enter single-user mode.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_grub2_uefi_password
References:
cis-csc11, 12, 14, 15, 16, 18, 3, 5
cobit5DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06
cui3.4.5
disaCCI-000213
hipaa164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7
iso27001-2013A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nistCM-6(a)
nist-csfPR.AC-4, PR.AC-6, PR.PT-3
osppFIA_UAU.1
os-srgSRG-OS-000080-GPOS-00048
stigidOL07-00-010491
anssiR5
stigrefSV-221702r958472_rule

Rule   Disable vsyscalls   [ref]

To disable use of virtual syscalls, add the argument vsyscall=none to the default GRUB 2 command line for the Linux operating system. To ensure that vsyscall=none is added as a kernel command line argument to newly installed kernels, add vsyscall=none to the default Grub2 command line for Linux operating systems. Modify the line within /etc/default/grub as shown below:
GRUB_CMDLINE_LINUX="... vsyscall=none ..."
Run the following command to update command line for already installed kernels:
# grubby --update-kernel=ALL --args="vsyscall=none"
Warning:  The vsyscall emulation is only available on x86_64 architecture (CONFIG_X86_VSYSCALL_EMULATION) making this rule not applicable to other CPU architectures.
Rationale:
Virtual Syscalls provide an opportunity of attack for a user who has control of the return instruction pointer.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_grub2_vsyscall_argument
References:
disaCCI-000366, CCI-001084
nistCM-7(a)
osppFPT_ASLR_EXT.1
os-srgSRG-OS-000480-GPOS-00227, SRG-OS-000134-GPOS-00068

Complexity:medium
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-53-CM-7(a)
  - grub2_vsyscall_argument
  - low_disruption
  - medium_complexity
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Check vsyscall argument exists
  command: grep '^\s*GRUB_CMDLINE_LINUX=.*vsyscall=' /etc/default/grub
  failed_when: false
  register: argcheck
  when:
  - '"grub2-common" in ansible_facts.packages'
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and ansible_architecture == "x86_64" )
  tags:
  - NIST-800-53-CM-7(a)
  - grub2_vsyscall_argument
  - low_disruption
  - medium_complexity
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Check vsyscall argument exists
  command: grep '^\s*GRUB_CMDLINE_LINUX=' /etc/default/grub
  failed_when: false
  register: linecheck
  when:
  - '"grub2-common" in ansible_facts.packages'
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and ansible_architecture == "x86_64" )
  tags:
  - NIST-800-53-CM-7(a)
  - grub2_vsyscall_argument
  - low_disruption
  - medium_complexity
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Add vsyscall argument
  ansible.builtin.lineinfile:
    line: GRUB_CMDLINE_LINUX="vsyscall=none "
    state: present
    dest: /etc/default/grub
    create: true
    mode: '0644'
  when:
  - '"grub2-common" in ansible_facts.packages'
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and ansible_architecture == "x86_64" )
  - argcheck is not skipped and linecheck is not skipped and argcheck.rc != 0 and
    linecheck.rc != 0
  tags:
  - NIST-800-53-CM-7(a)
  - grub2_vsyscall_argument
  - low_disruption
  - medium_complexity
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Replace existing vsyscall argument
  replace:
    path: /etc/default/grub
    regexp: vsyscall=[a-zA-Z0-9,]+
    replace: vsyscall=none
  when:
  - '"grub2-common" in ansible_facts.packages'
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and ansible_architecture == "x86_64" )
  - argcheck is not skipped and linecheck is not skipped and argcheck.rc == 0 and
    linecheck.rc == 0
  tags:
  - NIST-800-53-CM-7(a)
  - grub2_vsyscall_argument
  - low_disruption
  - medium_complexity
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Add vsyscall argument
  replace:
    path: /etc/default/grub
    regexp: (^\s*GRUB_CMDLINE_LINUX=.*)"
    replace: \1 vsyscall=none"
  when:
  - '"grub2-common" in ansible_facts.packages'
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and ansible_architecture == "x86_64" )
  - argcheck is not skipped and linecheck is not skipped and argcheck.rc != 0 and
    linecheck.rc == 0
  tags:
  - NIST-800-53-CM-7(a)
  - grub2_vsyscall_argument
  - low_disruption
  - medium_complexity
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Update grub defaults and the bootloader menu
  command: /sbin/grubby --update-kernel=ALL --args="vsyscall=none"
  when:
  - '"grub2-common" in ansible_facts.packages'
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and ansible_architecture == "x86_64" )
  tags:
  - NIST-800-53-CM-7(a)
  - grub2_vsyscall_argument
  - low_disruption
  - medium_complexity
  - medium_severity
  - reboot_required
  - restrict_strategy

[customizations.kernel]
append = "vsyscall=none"

# Remediation is applicable only in certain platforms
if rpm --quiet -q grub2-common && { ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && grep -q x86_64 /proc/sys/kernel/osrelease ); }; then

# Correct the form of default kernel command line in GRUB
if grep -q '^\s*GRUB_CMDLINE_LINUX=.*vsyscall=.*"'  '/etc/default/grub' ; then
       # modify the GRUB command-line if an vsyscall= arg already exists
       sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)vsyscall=[^[:space:]]\+\(.*\"\)/\1vsyscall=none\2/"  '/etc/default/grub'
# Add to already existing GRUB_CMDLINE_LINUX parameters
elif grep -q '^\s*GRUB_CMDLINE_LINUX='  '/etc/default/grub' ; then
       # no vsyscall=arg is present, append it
       sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)\"/\1 vsyscall=none\"/"  '/etc/default/grub'
# Add GRUB_CMDLINE_LINUX parameters line
else
       echo "GRUB_CMDLINE_LINUX=\"vsyscall=none\"" >> '/etc/default/grub'
fi
grubby --update-kernel=ALL --args=vsyscall=none

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Network Configuration and Firewalls   Group contains 10 groups and 26 rules
[ref]   Most systems must be connected to a network of some sort, and this brings with it the substantial risk of network attack. This section discusses the security impact of decisions about networking which must be made when configuring a system.

This section also discusses firewalls, network access controls, and other network security frameworks, which allow system-level rules to be written that can limit an attackers' ability to connect to your system. These rules can specify that network traffic should be allowed or denied from certain IP addresses, hosts, and networks. The rules can also specify which of the system's network services are available to particular hosts or networks.
Group   firewalld   Group contains 1 group and 1 rule
[ref]   The dynamic firewall daemon firewalld provides a dynamically managed firewall with support for network “zones” to assign a level of trust to a network and its associated connections and interfaces. It has support for IPv4 and IPv6 firewall settings. It supports Ethernet bridges and has a separation of runtime and permanent configuration options. It also has an interface for services or applications to add firewall rules directly.
A graphical configuration tool, firewall-config, is used to configure firewalld, which in turn uses iptables tool to communicate with Netfilter in the kernel which implements packet filtering.
The firewall service provided by firewalld is dynamic rather than static because changes to the configuration can be made at anytime and are immediately implemented. There is no need to save or apply the changes. No unintended disruption of existing network connections occurs as no part of the firewall has to be reloaded.
Group   Inspect and Activate Default firewalld Rules   Group contains 1 rule
[ref]   Firewalls can be used to separate networks into different zones based on the level of trust the user has decided to place on the devices and traffic within that network. NetworkManager informs firewalld to which zone an interface belongs. An interface's assigned zone can be changed by NetworkManager or via the firewall-config tool.
The zone settings in /etc/firewalld/ are a range of preset settings which can be quickly applied to a network interface. These are the zones provided by firewalld sorted according to the default trust level of the zones from untrusted to trusted:
  • drop

    Any incoming network packets are dropped, there is no reply. Only outgoing network connections are possible.

  • block

    Any incoming network connections are rejected with an icmp-host-prohibited message for IPv4 and icmp6-adm-prohibited for IPv6. Only network connections initiated from within the system are possible.

  • public

    For use in public areas. You do not trust the other computers on the network to not harm your computer. Only selected incoming connections are accepted.

  • external

    For use on external networks with masquerading enabled especially for routers. You do not trust the other computers on the network to not harm your computer. Only selected incoming connections are accepted.

  • dmz

    For computers in your demilitarized zone that are publicly-accessible with limited access to your internal network. Only selected incoming connections are accepted.

  • work

    For use in work areas. You mostly trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted.

  • home

    For use in home areas. You mostly trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted.

  • internal

    For use on internal networks. You mostly trust the other computers on the networks to not harm your computer. Only selected incoming connections are accepted.

  • trusted

    All network connections are accepted.


It is possible to designate one of these zones to be the default zone. When interface connections are added to NetworkManager, they are assigned to the default zone. On installation, the default zone in firewalld is set to be the public zone.
To find out all the settings of a zone, for example the public zone, enter the following command as root:
# firewall-cmd --zone=public --list-all
Example output of this command might look like the following:
# firewall-cmd --zone=public --list-all
public
  interfaces:
  services: mdns dhcpv6-client ssh
  ports:
  forward-ports:
  icmp-blocks: source-quench
To view the network zones currently active, enter the following command as root:
# firewall-cmd --get-service
The following listing displays the result of this command on common Oracle Linux 7 system:
# firewall-cmd --get-service
amanda-client bacula bacula-client dhcp dhcpv6 dhcpv6-client dns ftp
high-availability http https imaps ipp ipp-client ipsec kerberos kpasswd
ldap ldaps libvirt libvirt-tls mdns mountd ms-wbt mysql nfs ntp openvpn
pmcd pmproxy pmwebapi pmwebapis pop3s postgresql proxy-dhcp radius rpc-bind
samba samba-client smtp ssh telnet tftp tftp-client transmission-client
vnc-server wbem-https
Finally to view the network zones that will be active after the next firewalld service reload, enter the following command as root:
# firewall-cmd --get-service --permanent

Rule   Verify firewalld Enabled   [ref]

The firewalld service can be enabled with the following command:
$ sudo systemctl enable firewalld.service
Rationale:
Access control methods provide the ability to enhance system security posture by restricting services and known good IP addresses and address ranges. This prevents connections from unknown hosts and protocols.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_service_firewalld_enabled
References:
cis-csc11, 3, 9
cobit5BAI10.01, BAI10.02, BAI10.03, BAI10.05
cui3.1.3, 3.4.7
disaCCI-000382, CCI-000366, CCI-002314
isa-62443-20094.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 7.6
iso27001-2013A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4
nerc-cipCIP-003-8 R4, CIP-003-8 R5, CIP-004-6 R3
nistAC-4, CM-7(b), CA-3(5), SC-7(21), CM-6(a)
nist-csfPR.IP-1
osppFMT_SMF_EXT.1
os-srgSRG-OS-000096-GPOS-00050, SRG-OS-000297-GPOS-00115, SRG-OS-000480-GPOS-00227, SRG-OS-000480-GPOS-00231, SRG-OS-000480-GPOS-00232
stigidOL07-00-040520
bsiSYS.1.6.A5, SYS.1.6.A21
pcidss41.2.1, 1.2
stigrefSV-221868r991589_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include enable_firewalld

class enable_firewalld {
  service {'firewalld':
    enable => true,
    ensure => 'running',
  }
}

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-OL07-00-040520
  - NIST-800-171-3.1.3
  - NIST-800-171-3.4.7
  - NIST-800-53-AC-4
  - NIST-800-53-CA-3(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(21)
  - PCI-DSSv4-1.2
  - PCI-DSSv4-1.2.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_firewalld_enabled

- name: Verify firewalld Enabled - Enable service firewalld
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Verify firewalld Enabled - Enable Service firewalld
    ansible.builtin.systemd:
      name: firewalld
      enabled: true
      state: started
      masked: false
    when:
    - '"firewalld" in ansible_facts.packages'
  when:
  - '"kernel" in ansible_facts.packages'
  - '"firewalld" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-040520
  - NIST-800-171-3.1.3
  - NIST-800-171-3.4.7
  - NIST-800-53-AC-4
  - NIST-800-53-CA-3(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(21)
  - PCI-DSSv4-1.2
  - PCI-DSSv4-1.2.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_firewalld_enabled


[customizations.services]
enabled = ["firewalld"]

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel && { rpm --quiet -q firewalld; }; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'firewalld.service'
"$SYSTEMCTL_EXEC" start 'firewalld.service'
"$SYSTEMCTL_EXEC" enable 'firewalld.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   IPv6   Group contains 1 group and 6 rules
[ref]   The system includes support for Internet Protocol version 6. A major and often-mentioned improvement over IPv4 is its enormous increase in the number of available addresses. Another important feature is its support for automatic configuration of many network settings.
Group   Configure IPv6 Settings if Necessary   Group contains 6 rules
[ref]   A major feature of IPv6 is the extent to which systems implementing it can automatically configure their networking devices using information from the network. From a security perspective, manually configuring important configuration information is preferable to accepting it from the network in an unauthenticated fashion.

Rule   Configure Accepting Router Advertisements on All IPv6 Interfaces   [ref]

To set the runtime status of the net.ipv6.conf.all.accept_ra kernel parameter, run the following command:
$ sudo sysctl -w net.ipv6.conf.all.accept_ra=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.all.accept_ra = 0
Rationale:
An illicit router advertisement message could result in a man-in-the-middle attack.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra
References:
cis-csc11, 14, 3, 9
cobit5BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
cui3.1.20
disaCCI-000366
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nistCM-7(a), CM-7(b), CM-6(a)
nist-csfPR.IP-1, PR.PT-3
os-srgSRG-OS-000480-GPOS-00227

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_ra

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.all.accept_ra.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_ra

- name: Comment out any occurrences of net.ipv6.conf.all.accept_ra from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.all.accept_ra
    replace: '#net.ipv6.conf.all.accept_ra'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_ra
- name: XCCDF Value sysctl_net_ipv6_conf_all_accept_ra_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_accept_ra_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.accept_ra is set
  sysctl:
    name: net.ipv6.conf.all.accept_ra
    value: '{{ sysctl_net_ipv6_conf_all_accept_ra_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_ra

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv6.conf.all.accept_ra from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_ra.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_ra" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_accept_ra_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_ra
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.accept_ra="$sysctl_net_ipv6_conf_all_accept_ra_value"

#
# If net.ipv6.conf.all.accept_ra present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_ra = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_ra")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_ra_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_ra\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_ra\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Accepting ICMP Redirects for All IPv6 Interfaces   [ref]

To set the runtime status of the net.ipv6.conf.all.accept_redirects kernel parameter, run the following command:
$ sudo sysctl -w net.ipv6.conf.all.accept_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.all.accept_redirects = 0
Rationale:
An illicit ICMP redirect message could result in a man-in-the-middle attack.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_redirects
References:
cis-csc11, 14, 3, 9
cobit5BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
cui3.1.20
disaCCI-000366
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nistCM-7(a), CM-7(b), CM-6(a), CM-6(b), CM-6.1(iv)
nist-csfPR.IP-1, PR.PT-3
os-srgSRG-OS-000480-GPOS-00227
anssiR13

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_redirects

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.all.accept_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_redirects

- name: Comment out any occurrences of net.ipv6.conf.all.accept_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.all.accept_redirects
    replace: '#net.ipv6.conf.all.accept_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_redirects
- name: XCCDF Value sysctl_net_ipv6_conf_all_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.accept_redirects is set
  sysctl:
    name: net.ipv6.conf.all.accept_redirects
    value: '{{ sysctl_net_ipv6_conf_all_accept_redirects_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_redirects

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv6.conf.all.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_accept_redirects_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.accept_redirects="$sysctl_net_ipv6_conf_all_accept_redirects_value"

#
# If net.ipv6.conf.all.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfaces   [ref]

To set the runtime status of the net.ipv6.conf.all.accept_source_route kernel parameter, run the following command:
$ sudo sysctl -w net.ipv6.conf.all.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.all.accept_source_route = 0
Rationale:
Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv6 forwarding is enabled and the system is functioning as a router.

Accepting source-routed packets in the IPv6 protocol has few legitimate uses. It should be disabled unless it is absolutely required.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_source_route
References:
cis-csc1, 12, 13, 14, 15, 16, 18, 4, 6, 8, 9
cobit5APO01.06, APO13.01, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.07, DSS06.02
cui3.1.20
disaCCI-000366
isa-62443-20094.2.3.4, 4.3.3.4, 4.4.3.3
isa-62443-2013SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nistCM-7(a), CM-7(b), CM-6(a)
nist-csfDE.AE-1, ID.AM-3, PR.AC-5, PR.DS-5, PR.PT-4
os-srgSRG-OS-000480-GPOS-00227
stigidOL07-00-040830
anssiR13
stigrefSV-221894r991589_rule

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-OL07-00-040830
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_source_route

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.all.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-040830
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_source_route

- name: Comment out any occurrences of net.ipv6.conf.all.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.all.accept_source_route
    replace: '#net.ipv6.conf.all.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-040830
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_source_route
- name: XCCDF Value sysctl_net_ipv6_conf_all_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.accept_source_route is set
  sysctl:
    name: net.ipv6.conf.all.accept_source_route
    value: '{{ sysctl_net_ipv6_conf_all_accept_source_route_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-040830
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_source_route

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv6.conf.all.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_source_route" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_accept_source_route_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.accept_source_route="$sysctl_net_ipv6_conf_all_accept_source_route_value"

#
# If net.ipv6.conf.all.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Accepting Router Advertisements on all IPv6 Interfaces by Default   [ref]

To set the runtime status of the net.ipv6.conf.default.accept_ra kernel parameter, run the following command:
$ sudo sysctl -w net.ipv6.conf.default.accept_ra=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.default.accept_ra = 0
Rationale:
An illicit router advertisement message could result in a man-in-the-middle attack.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra
References:
cis-csc11, 14, 3, 9
cobit5BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
cui3.1.20
disaCCI-000366
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nistCM-7(a), CM-7(b), CM-6(a)
nist-csfPR.IP-1, PR.PT-3
os-srgSRG-OS-000480-GPOS-00227

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_ra

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.default.accept_ra.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_ra

- name: Comment out any occurrences of net.ipv6.conf.default.accept_ra from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.default.accept_ra
    replace: '#net.ipv6.conf.default.accept_ra'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_ra
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_ra_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_ra_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_ra is set
  sysctl:
    name: net.ipv6.conf.default.accept_ra
    value: '{{ sysctl_net_ipv6_conf_default_accept_ra_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_ra

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv6.conf.default.accept_ra from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_ra.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_ra" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_accept_ra_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_ra
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_ra="$sysctl_net_ipv6_conf_default_accept_ra_value"

#
# If net.ipv6.conf.default.accept_ra present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_ra = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_ra")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_ra_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_ra\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_ra\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv6 Interfaces   [ref]

To set the runtime status of the net.ipv6.conf.default.accept_redirects kernel parameter, run the following command:
$ sudo sysctl -w net.ipv6.conf.default.accept_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.default.accept_redirects = 0
Rationale:
An illicit ICMP redirect message could result in a man-in-the-middle attack.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_redirects
References:
cis-csc11, 14, 3, 9
cobit5BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
cui3.1.20
disaCCI-000366
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nistCM-7(a), CM-7(b), CM-6(a)
nist-csfPR.IP-1, PR.PT-3
os-srgSRG-OS-000480-GPOS-00227
anssiR13

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_redirects

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.default.accept_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_redirects

- name: Comment out any occurrences of net.ipv6.conf.default.accept_redirects from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.default.accept_redirects
    replace: '#net.ipv6.conf.default.accept_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_redirects
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_redirects is set
  sysctl:
    name: net.ipv6.conf.default.accept_redirects
    value: '{{ sysctl_net_ipv6_conf_default_accept_redirects_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_redirects

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv6.conf.default.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_accept_redirects_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_redirects="$sysctl_net_ipv6_conf_default_accept_redirects_value"

#
# If net.ipv6.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default   [ref]

To set the runtime status of the net.ipv6.conf.default.accept_source_route kernel parameter, run the following command:
$ sudo sysctl -w net.ipv6.conf.default.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.default.accept_source_route = 0
Rationale:
Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv6 forwarding is enabled and the system is functioning as a router. Accepting source-routed packets in the IPv6 protocol has few legitimate uses. It should be disabled unless it is absolutely required.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_source_route
References:
cis-csc1, 12, 13, 14, 15, 16, 18, 4, 6, 8, 9
cobit5APO01.06, APO13.01, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.07, DSS06.02
cui3.1.20
disaCCI-000366
isa-62443-20094.2.3.4, 4.3.3.4, 4.4.3.3
isa-62443-2013SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nistCM-7(a), CM-7(b), CM-6(a), CM-6(b), CM-6.1(iv)
nist-csfDE.AE-1, ID.AM-3, PR.AC-5, PR.DS-5, PR.PT-4
pcidssReq-1.4.3
os-srgSRG-OS-000480-GPOS-00227
anssiR13
pcidss41.4.2, 1.4

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.default.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route

- name: Comment out any occurrences of net.ipv6.conf.default.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.default.accept_source_route
    replace: '#net.ipv6.conf.default.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_source_route is set
  sysctl:
    name: net.ipv6.conf.default.accept_source_route
    value: '{{ sysctl_net_ipv6_conf_default_accept_source_route_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv6.conf.default.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_source_route" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_accept_source_route_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_source_route="$sysctl_net_ipv6_conf_default_accept_source_route_value"

#
# If net.ipv6.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Kernel Parameters Which Affect Networking   Group contains 2 groups and 16 rules
[ref]   The sysctl utility is used to set parameters which affect the operation of the Linux kernel. Kernel parameters which affect networking and have security implications are described here.
Group   Network Related Kernel Runtime Parameters for Hosts and Routers   Group contains 13 rules
[ref]   Certain kernel parameters should be set for systems which are acting as either hosts or routers to improve the system's ability defend against certain types of IPv4 protocol attacks.

Rule   Disable Accepting ICMP Redirects for All IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.accept_redirects kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.all.accept_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.accept_redirects = 0
Rationale:
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.
This feature of the IPv4 protocol has few legitimate uses. It should be disabled unless absolutely required."
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_redirects
References:
cis-csc1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9
cjis5.10.1.1
cobit5APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06
cui3.1.20
disaCCI-000366
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2
nistCM-7(a), CM-7(b), CM-6(a), SC-7(a)
nist-csfDE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3
os-srgSRG-OS-000480-GPOS-00227
stigidOL07-00-040641
anssiR12
stigrefSV-221879r991589_rule

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040641
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_redirects

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.accept_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040641
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_redirects

- name: Comment out any occurrences of net.ipv4.conf.all.accept_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.accept_redirects
    replace: '#net.ipv4.conf.all.accept_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040641
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_all_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.accept_redirects is set
  sysctl:
    name: net.ipv4.conf.all.accept_redirects
    value: '{{ sysctl_net_ipv4_conf_all_accept_redirects_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040641
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_redirects

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv4.conf.all.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.accept_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_accept_redirects_value='0'


#
# Set runtime for net.ipv4.conf.all.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.accept_redirects="$sysctl_net_ipv4_conf_all_accept_redirects_value"

#
# If net.ipv4.conf.all.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.accept_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.accept_source_route kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.all.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.accept_source_route = 0
Rationale:
Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv4 forwarding is enabled and the system is functioning as a router.

Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_source_route
References:
cis-csc1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cobit5APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui3.1.20
disaCCI-000366
isa-62443-20094.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nistCM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a)
nist-csfDE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
os-srgSRG-OS-000480-GPOS-00227
stigidOL07-00-040610
anssiR12
stigrefSV-221873r991589_rule

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-OL07-00-040610
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_source_route

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-040610
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_source_route

- name: Comment out any occurrences of net.ipv4.conf.all.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.accept_source_route
    replace: '#net.ipv4.conf.all.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-040610
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_source_route
- name: XCCDF Value sysctl_net_ipv4_conf_all_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.accept_source_route is set
  sysctl:
    name: net.ipv4.conf.all.accept_source_route
    value: '{{ sysctl_net_ipv4_conf_all_accept_source_route_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-040610
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_source_route

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv4.conf.all.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.accept_source_route" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_accept_source_route_value='0'


#
# Set runtime for net.ipv4.conf.all.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.accept_source_route="$sysctl_net_ipv4_conf_all_accept_source_route_value"

#
# If net.ipv4.conf.all.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable Kernel Parameter to Log Martian Packets on all IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.log_martians kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.all.log_martians=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.log_martians = 1
Rationale:
The presence of "martian" packets (which have impossible addresses) as well as spoofed packets, source-routed packets, and redirects could be a sign of nefarious network activity. Logging these packets enables this activity to be detected.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_log_martians
References:
cis-csc1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9
cobit5APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.04, DSS03.05, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.06
cui3.1.20
disaCCI-000366
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.11.2.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.2.1, A.6.2.2, A.9.1.2
nistCM-7(a), CM-7(b), SC-5(3)(a)
nist-csfDE.CM-1, PR.AC-3, PR.DS-4, PR.IP-1, PR.PT-3, PR.PT-4
os-srgSRG-OS-000480-GPOS-00227

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_all_log_martians
  - unknown_severity

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.log_martians.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_all_log_martians
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.conf.all.log_martians from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.log_martians
    replace: '#net.ipv4.conf.all.log_martians'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_all_log_martians
  - unknown_severity
- name: XCCDF Value sysctl_net_ipv4_conf_all_log_martians_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_log_martians_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.log_martians is set
  sysctl:
    name: net.ipv4.conf.all.log_martians
    value: '{{ sysctl_net_ipv4_conf_all_log_martians_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_all_log_martians
  - unknown_severity

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv4.conf.all.log_martians from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.log_martians.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.log_martians" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_log_martians_value='1'


#
# Set runtime for net.ipv4.conf.all.log_martians
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.log_martians="$sysctl_net_ipv4_conf_all_log_martians_value"

#
# If net.ipv4.conf.all.log_martians present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.log_martians = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.log_martians")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_log_martians_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.log_martians\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.log_martians\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.rp_filter kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.all.rp_filter=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.rp_filter = 1
Rationale:
Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_rp_filter
References:
cis-csc1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9
cobit5APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02
cui3.1.20
disaCCI-000366
isa-62443-20094.2.3.4, 4.3.3.4, 4.4.3.3
isa-62443-2013SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nistCM-7(a), CM-7(b), CM-6(a), SC-7(a)
nist-csfDE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4
pcidssReq-1.4.3
os-srgSRG-OS-000480-GPOS-00227
stigidOL07-00-040611
anssiR12
pcidss41.4.3, 1.4
stigrefSV-221874r991589_rule

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-OL07-00-040611
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.rp_filter.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-040611
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter

- name: Comment out any occurrences of net.ipv4.conf.all.rp_filter from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.rp_filter
    replace: '#net.ipv4.conf.all.rp_filter'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-040611
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter
- name: XCCDF Value sysctl_net_ipv4_conf_all_rp_filter_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_rp_filter_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.rp_filter is set
  sysctl:
    name: net.ipv4.conf.all.rp_filter
    value: '{{ sysctl_net_ipv4_conf_all_rp_filter_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-040611
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv4.conf.all.rp_filter from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.rp_filter.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.rp_filter" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_rp_filter_value='1'


#
# Set runtime for net.ipv4.conf.all.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.rp_filter="$sysctl_net_ipv4_conf_all_rp_filter_value"

#
# If net.ipv4.conf.all.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.rp_filter = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.rp_filter")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_rp_filter_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.rp_filter\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.rp_filter\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for Accepting Secure ICMP Redirects on all IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.secure_redirects kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.all.secure_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.secure_redirects = 0
Rationale:
Accepting "secure" ICMP redirects (from those gateways listed as default gateways) has few legitimate uses. It should be disabled unless it is absolutely required.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_secure_redirects
References:
cis-csc1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cobit5APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui3.1.20
disaCCI-001503, CCI-001551
isa-62443-20094.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nistCM-7(a), CM-7(b), CM-6(a), SC-7(a)
nist-csfDE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
pcidssReq-1.4.3
os-srgSRG-OS-000480-GPOS-00227
anssiR12
pcidss41.4.3, 1.4

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_secure_redirects

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.secure_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_secure_redirects

- name: Comment out any occurrences of net.ipv4.conf.all.secure_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.secure_redirects
    replace: '#net.ipv4.conf.all.secure_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_secure_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_all_secure_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_secure_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.secure_redirects is set
  sysctl:
    name: net.ipv4.conf.all.secure_redirects
    value: '{{ sysctl_net_ipv4_conf_all_secure_redirects_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_secure_redirects

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv4.conf.all.secure_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.secure_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.secure_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_secure_redirects_value='0'


#
# Set runtime for net.ipv4.conf.all.secure_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.secure_redirects="$sysctl_net_ipv4_conf_all_secure_redirects_value"

#
# If net.ipv4.conf.all.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.secure_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.secure_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_secure_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.secure_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.secure_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.default.accept_redirects kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.default.accept_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.accept_redirects = 0
Rationale:
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.
This feature of the IPv4 protocol has few legitimate uses. It should be disabled unless absolutely required.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_redirects
References:
cis-csc1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cjis5.10.1.1
cobit5APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui3.1.20
disaCCI-000366
isa-62443-20094.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nistCM-7(a), CM-7(b), CM-6(a), SC-7(a)
nist-csfDE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
pcidssReq-1.4.3
os-srgSRG-OS-000480-GPOS-00227
stigidOL07-00-040640
anssiR12
pcidss41.4.3, 1.4
stigrefSV-221878r991589_rule

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040640
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_redirects

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.accept_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040640
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_redirects

- name: Comment out any occurrences of net.ipv4.conf.default.accept_redirects from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.accept_redirects
    replace: '#net.ipv4.conf.default.accept_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040640
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_default_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.accept_redirects is set
  sysctl:
    name: net.ipv4.conf.default.accept_redirects
    value: '{{ sysctl_net_ipv4_conf_default_accept_redirects_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040640
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_redirects

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv4.conf.default.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.accept_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_accept_redirects_value='0'


#
# Set runtime for net.ipv4.conf.default.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.accept_redirects="$sysctl_net_ipv4_conf_default_accept_redirects_value"

#
# If net.ipv4.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Default   [ref]

To set the runtime status of the net.ipv4.conf.default.accept_source_route kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.default.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.accept_source_route = 0
Rationale:
Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures.
Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required, such as when IPv4 forwarding is enabled and the system is legitimately functioning as a router.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_source_route
References:
cis-csc1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cjis5.10.1.1
cobit5APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui3.1.20
disaCCI-000366
isa-62443-20094.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nistCM-7(a), CM-7(b), SC-5, SC-7(a)
nist-csfDE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
os-srgSRG-OS-000480-GPOS-00227
stigidOL07-00-040620
anssiR12
stigrefSV-221876r991589_rule

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040620
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_source_route

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040620
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_source_route

- name: Comment out any occurrences of net.ipv4.conf.default.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.accept_source_route
    replace: '#net.ipv4.conf.default.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040620
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_source_route
- name: XCCDF Value sysctl_net_ipv4_conf_default_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.accept_source_route is set
  sysctl:
    name: net.ipv4.conf.default.accept_source_route
    value: '{{ sysctl_net_ipv4_conf_default_accept_source_route_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040620
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_source_route

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv4.conf.default.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.accept_source_route" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_accept_source_route_value='0'


#
# Set runtime for net.ipv4.conf.default.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.accept_source_route="$sysctl_net_ipv4_conf_default_accept_source_route_value"

#
# If net.ipv4.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable Kernel Paremeter to Log Martian Packets on all IPv4 Interfaces by Default   [ref]

To set the runtime status of the net.ipv4.conf.default.log_martians kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.default.log_martians=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.log_martians = 1
Rationale:
The presence of "martian" packets (which have impossible addresses) as well as spoofed packets, source-routed packets, and redirects could be a sign of nefarious network activity. Logging these packets enables this activity to be detected.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_log_martians
References:
cis-csc1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9
cobit5APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.04, DSS03.05, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.06
cui3.1.20
disaCCI-000366
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.11.2.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.2.1, A.6.2.2, A.9.1.2
nistCM-7(a), CM-7(b), SC-5(3)(a)
nist-csfDE.CM-1, PR.AC-3, PR.DS-4, PR.IP-1, PR.PT-3, PR.PT-4
os-srgSRG-OS-000480-GPOS-00227

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_default_log_martians
  - unknown_severity

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.log_martians.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_default_log_martians
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.conf.default.log_martians from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.log_martians
    replace: '#net.ipv4.conf.default.log_martians'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_default_log_martians
  - unknown_severity
- name: XCCDF Value sysctl_net_ipv4_conf_default_log_martians_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_log_martians_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.log_martians is set
  sysctl:
    name: net.ipv4.conf.default.log_martians
    value: '{{ sysctl_net_ipv4_conf_default_log_martians_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_default_log_martians
  - unknown_severity

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv4.conf.default.log_martians from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.log_martians.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.log_martians" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_log_martians_value='1'


#
# Set runtime for net.ipv4.conf.default.log_martians
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.log_martians="$sysctl_net_ipv4_conf_default_log_martians_value"

#
# If net.ipv4.conf.default.log_martians present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.log_martians = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.log_martians")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_log_martians_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.log_martians\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.log_martians\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces by Default   [ref]

To set the runtime status of the net.ipv4.conf.default.rp_filter kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.default.rp_filter=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.rp_filter = 1
Rationale:
Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_rp_filter
References:
cis-csc1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9
cobit5APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02
cui3.1.20
disaCCI-000366
isa-62443-20094.2.3.4, 4.3.3.4, 4.4.3.3
isa-62443-2013SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nistCM-7(a), CM-7(b), CM-6(a), SC-7(a)
nist-csfDE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4
os-srgSRG-OS-000480-GPOS-00227
stigidOL07-00-040612
anssiR12
stigrefSV-221875r991589_rule

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-OL07-00-040612
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_rp_filter

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.rp_filter.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-040612
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_rp_filter

- name: Comment out any occurrences of net.ipv4.conf.default.rp_filter from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.rp_filter
    replace: '#net.ipv4.conf.default.rp_filter'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-040612
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_rp_filter
- name: XCCDF Value sysctl_net_ipv4_conf_default_rp_filter_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_rp_filter_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.rp_filter is set
  sysctl:
    name: net.ipv4.conf.default.rp_filter
    value: '{{ sysctl_net_ipv4_conf_default_rp_filter_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-040612
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_rp_filter

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv4.conf.default.rp_filter from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.rp_filter.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.rp_filter" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_rp_filter_value='1'


#
# Set runtime for net.ipv4.conf.default.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.rp_filter="$sysctl_net_ipv4_conf_default_rp_filter_value"

#
# If net.ipv4.conf.default.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.rp_filter = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.rp_filter")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_rp_filter_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.rp_filter\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.rp_filter\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Configure Kernel Parameter for Accepting Secure Redirects By Default   [ref]

To set the runtime status of the net.ipv4.conf.default.secure_redirects kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.default.secure_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.secure_redirects = 0
Rationale:
Accepting "secure" ICMP redirects (from those gateways listed as default gateways) has few legitimate uses. It should be disabled unless it is absolutely required.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_secure_redirects
References:
cis-csc1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cobit5APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui3.1.20
disaCCI-001551
isa-62443-20094.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nistCM-7(a), CM-7(b), SC-5, SC-7(a)
nist-csfDE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
os-srgSRG-OS-000480-GPOS-00227
anssiR12

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_secure_redirects

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.secure_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_secure_redirects

- name: Comment out any occurrences of net.ipv4.conf.default.secure_redirects from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.secure_redirects
    replace: '#net.ipv4.conf.default.secure_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_secure_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_default_secure_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_secure_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.secure_redirects is set
  sysctl:
    name: net.ipv4.conf.default.secure_redirects
    value: '{{ sysctl_net_ipv4_conf_default_secure_redirects_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_secure_redirects

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv4.conf.default.secure_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.secure_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.secure_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_secure_redirects_value='0'


#
# Set runtime for net.ipv4.conf.default.secure_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.secure_redirects="$sysctl_net_ipv4_conf_default_secure_redirects_value"

#
# If net.ipv4.conf.default.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.secure_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.secure_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_secure_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.secure_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.secure_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable Kernel Parameter to Ignore ICMP Broadcast Echo Requests on IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.icmp_echo_ignore_broadcasts kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.icmp_echo_ignore_broadcasts = 1
Rationale:
Responding to broadcast (ICMP) echoes facilitates network mapping and provides a vector for amplification attacks.
Ignoring ICMP echo requests (pings) sent to broadcast or multicast addresses makes the system slightly more difficult to enumerate on the network.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_echo_ignore_broadcasts
References:
cis-csc1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cjis5.10.1.1
cobit5APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui3.1.20
disaCCI-000366
isa-62443-20094.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nistCM-7(a), CM-7(b), SC-5
nist-csfDE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
pcidssReq-1.4.3
os-srgSRG-OS-000480-GPOS-00227
stigidOL07-00-040630
pcidss41.4.2, 1.4
stigrefSV-221877r991589_rule

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040630
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.icmp_echo_ignore_broadcasts.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040630
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts

- name: Comment out any occurrences of net.ipv4.icmp_echo_ignore_broadcasts from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.icmp_echo_ignore_broadcasts
    replace: '#net.ipv4.icmp_echo_ignore_broadcasts'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040630
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts
- name: XCCDF Value sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value # promote to variable
  set_fact:
    sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.icmp_echo_ignore_broadcasts is set
  sysctl:
    name: net.ipv4.icmp_echo_ignore_broadcasts
    value: '{{ sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040630
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv4.icmp_echo_ignore_broadcasts from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.icmp_echo_ignore_broadcasts.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.icmp_echo_ignore_broadcasts" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value='1'


#
# Set runtime for net.ipv4.icmp_echo_ignore_broadcasts
#
/sbin/sysctl -q -n -w net.ipv4.icmp_echo_ignore_broadcasts="$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value"

#
# If net.ipv4.icmp_echo_ignore_broadcasts present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_echo_ignore_broadcasts = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.icmp_echo_ignore_broadcasts")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.icmp_echo_ignore_broadcasts\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.icmp_echo_ignore_broadcasts\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable Kernel Parameter to Ignore Bogus ICMP Error Responses on IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.icmp_ignore_bogus_error_responses kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.icmp_ignore_bogus_error_responses=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.icmp_ignore_bogus_error_responses = 1
Rationale:
Ignoring bogus ICMP error responses reduces log size, although some activity would not be logged.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_ignore_bogus_error_responses
References:
cis-csc1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9
cobit5APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06
cui3.1.20
disaCCI-000366
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2
nerc-cipCIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nistCM-7(a), CM-7(b), SC-5
nist-csfDE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3
pcidssReq-1.4.3
os-srgSRG-OS-000480-GPOS-00227
anssiR12
pcidss41.4.2, 1.4

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.icmp_ignore_bogus_error_responses.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.icmp_ignore_bogus_error_responses
    from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.icmp_ignore_bogus_error_responses
    replace: '#net.ipv4.icmp_ignore_bogus_error_responses'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity
- name: XCCDF Value sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value # promote to variable
  set_fact:
    sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.icmp_ignore_bogus_error_responses is set
  sysctl:
    name: net.ipv4.icmp_ignore_bogus_error_responses
    value: '{{ sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv4.icmp_ignore_bogus_error_responses from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.icmp_ignore_bogus_error_responses.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.icmp_ignore_bogus_error_responses" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value='1'


#
# Set runtime for net.ipv4.icmp_ignore_bogus_error_responses
#
/sbin/sysctl -q -n -w net.ipv4.icmp_ignore_bogus_error_responses="$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value"

#
# If net.ipv4.icmp_ignore_bogus_error_responses present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_ignore_bogus_error_responses = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.icmp_ignore_bogus_error_responses")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.icmp_ignore_bogus_error_responses\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.icmp_ignore_bogus_error_responses\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable Kernel Parameter to Use TCP Syncookies on Network Interfaces   [ref]

To set the runtime status of the net.ipv4.tcp_syncookies kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.tcp_syncookies=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.tcp_syncookies = 1
Rationale:
A TCP SYN flood attack can cause a denial of service by filling a system's TCP connection table with connections in the SYN_RCVD state. Syncookies can be used to track a connection when a subsequent ACK is received, verifying the initiator is attempting a valid connection and is not a flood source. This feature is activated when a flood condition is detected, and enables the system to continue servicing valid connection requests.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_syncookies
References:
cis-csc1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9
cjis5.10.1.1
cobit5APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02
cui3.1.20
disaCCI-001095, CCI-000366, CCI-002385
isa-62443-20094.2.3.4, 4.3.3.4, 4.4.3.3
isa-62443-2013SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nistCM-7(a), CM-7(b), SC-5(1), SC-5(2), SC-5(3)(a), CM-6(a)
nist-csfDE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4
pcidssReq-1.4.1
os-srgSRG-OS-000480-GPOS-00227, SRG-OS-000420-GPOS-00186, SRG-OS-000142-GPOS-00071
anssiR12
pcidss41.4.3, 1.4

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.tcp_syncookies.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies

- name: Comment out any occurrences of net.ipv4.tcp_syncookies from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.tcp_syncookies
    replace: '#net.ipv4.tcp_syncookies'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies
- name: XCCDF Value sysctl_net_ipv4_tcp_syncookies_value # promote to variable
  set_fact:
    sysctl_net_ipv4_tcp_syncookies_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.tcp_syncookies is set
  sysctl:
    name: net.ipv4.tcp_syncookies
    value: '{{ sysctl_net_ipv4_tcp_syncookies_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv4.tcp_syncookies from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.tcp_syncookies.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.tcp_syncookies" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_tcp_syncookies_value='1'


#
# Set runtime for net.ipv4.tcp_syncookies
#
/sbin/sysctl -q -n -w net.ipv4.tcp_syncookies="$sysctl_net_ipv4_tcp_syncookies_value"

#
# If net.ipv4.tcp_syncookies present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.tcp_syncookies = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.tcp_syncookies")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_tcp_syncookies_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.tcp_syncookies\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.tcp_syncookies\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Network Parameters for Hosts Only   Group contains 3 rules
[ref]   If the system is not going to be used as a router, then setting certain kernel parameters ensure that the host will not perform routing of network traffic.

Rule   Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.send_redirects kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.all.send_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.send_redirects = 0
Rationale:
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table possibly revealing portions of the network topology.
The ability to send ICMP redirects is only appropriate for systems acting as routers.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_send_redirects
References:
cis-csc1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cjis5.10.1.1
cobit5APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui3.1.20
disaCCI-000366
isa-62443-20094.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nistCM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a)
nist-csfDE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
os-srgSRG-OS-000480-GPOS-00227
stigidOL07-00-040660
anssiR12
pcidss41.4.5, 1.4
stigrefSV-221881r991589_rule

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040660
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.5
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_send_redirects

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.send_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040660
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.5
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_send_redirects

- name: Comment out any occurrences of net.ipv4.conf.all.send_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.send_redirects
    replace: '#net.ipv4.conf.all.send_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040660
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.5
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_send_redirects

- name: Ensure sysctl net.ipv4.conf.all.send_redirects is set to 0
  sysctl:
    name: net.ipv4.conf.all.send_redirects
    value: '0'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040660
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.5
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_send_redirects

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv4.conf.all.send_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.send_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.send_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.ipv4.conf.all.send_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.send_redirects="0"

#
# If net.ipv4.conf.all.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.all.send_redirects = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.send_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.send_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.send_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Default   [ref]

To set the runtime status of the net.ipv4.conf.default.send_redirects kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.default.send_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.send_redirects = 0
Rationale:
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table possibly revealing portions of the network topology.
The ability to send ICMP redirects is only appropriate for systems acting as routers.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_send_redirects
References:
cis-csc1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cjis5.10.1.1
cobit5APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui3.1.20
disaCCI-000366
isa-62443-20094.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nistCM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a)
nist-csfDE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
os-srgSRG-OS-000480-GPOS-00227
stigidOL07-00-040650
anssiR12
pcidss41.4.5, 1.4
stigrefSV-221880r991589_rule

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040650
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.5
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_send_redirects

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.send_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040650
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.5
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_send_redirects

- name: Comment out any occurrences of net.ipv4.conf.default.send_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.send_redirects
    replace: '#net.ipv4.conf.default.send_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040650
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.5
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_send_redirects

- name: Ensure sysctl net.ipv4.conf.default.send_redirects is set to 0
  sysctl:
    name: net.ipv4.conf.default.send_redirects
    value: '0'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-OL07-00-040650
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.5
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_send_redirects

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv4.conf.default.send_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.send_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.send_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.ipv4.conf.default.send_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.send_redirects="0"

#
# If net.ipv4.conf.default.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.default.send_redirects = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.send_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.send_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.send_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for IP Forwarding on IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.ip_forward kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.ip_forward=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.ip_forward = 0
Warning:  Certain technologies such as virtual machines, containers, etc. rely on IPv4 forwarding to enable and use networking. Disabling IPv4 forwarding would cause those technologies to stop working. Therefore, this rule should not be used in profiles or benchmarks that target usage of IPv4 forwarding.
Rationale:
Routing protocol daemons are typically used on routers to exchange network topology information with other routers. If this capability is used when not required, system network information may be unnecessarily transmitted across the network.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_ip_forward
References:
cis-csc1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9
cobit5APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06
cui3.1.20
disaCCI-000366
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2
nerc-cipCIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nistCM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a)
nist-csfDE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3, PR.PT-4
pcidssReq-1.3.1, Req-1.3.2
os-srgSRG-OS-000480-GPOS-00227
stigidOL07-00-040740
anssiR12
pcidss41.4.3, 1.4
stigrefSV-221889r991589_rule

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-OL07-00-040740
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_ip_forward

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.ip_forward.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: '"kernel" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-040740
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_ip_forward

- name: Comment out any occurrences of net.ipv4.ip_forward from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.ip_forward
    replace: '#net.ipv4.ip_forward'
  loop: '{{ find_sysctl_d.files }}'
  when: '"kernel" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-040740
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_ip_forward

- name: Ensure sysctl net.ipv4.ip_forward is set to 0
  sysctl:
    name: net.ipv4.ip_forward
    value: '0'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: '"kernel" in ansible_facts.packages'
  tags:
  - DISA-STIG-OL07-00-040740
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_ip_forward

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

# Comment out any occurrences of net.ipv4.ip_forward from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.ip_forward.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.ip_forward" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.ipv4.ip_forward
#
/sbin/sysctl -q -n -w net.ipv4.ip_forward="0"

#
# If net.ipv4.ip_forward present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.ip_forward = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.ip_forward")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.ip_forward\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.ip_forward\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Uncommon Network Protocols   Group contains 2 rules
[ref]   The system includes support for several network protocols which are not commonly used. Although security vulnerabilities in kernel networking code are not frequently discovered, the consequences can be dramatic. Ensuring uncommon network protocols are disabled reduces the system's risk to attacks targeted at its implementation of those protocols.
Warning:  Although these protocols are not commonly used, avoid disruption in your network environment by ensuring they are not needed prior to disabling them.

Rule   Disable DCCP Support   [ref]

The Datagram Congestion Control Protocol (DCCP) is a relatively new transport layer protocol, designed to support streaming media and telephony. To configure the system to prevent the dccp kernel module from being loaded, add the following line to the file /etc/modprobe.d/dccp.conf:
install dccp /bin/false
To configure the system to prevent the dccp from being used, add the following line to file /etc/modprobe.d/dccp.conf:
blacklist dccp
Rationale:
Disabling DCCP protects the system against exploitation of any flaws in its implementation.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_kernel_module_dccp_disabled
References:
cis-csc11, 14, 3, 9
cjis5.10.1
cobit5BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
cui3.4.6
disaCCI-001958
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nistCM-7(a), CM-7(b), CM-6(a)
nist-csfPR.IP-1, PR.PT-3
pcidssReq-1.4.2
os-srgSRG-OS-000096-GPOS-00050, SRG-OS-000378-GPOS-00163
stigidOL07-00-020101
pcidss41.4.2, 1.4
stigrefSV-221713r958820_rule

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.10.1
  - DISA-STIG-OL07-00-020101
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.2
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - kernel_module_dccp_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

- name: Ensure kernel module 'dccp' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/dccp.conf
    regexp: install\s+dccp
    line: install dccp /bin/false
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1
  - DISA-STIG-OL07-00-020101
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.2
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - kernel_module_dccp_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

- name: Ensure kernel module 'dccp' is blacklisted
  lineinfile:
    create: true
    dest: /etc/modprobe.d/dccp.conf
    regexp: ^blacklist dccp$
    line: blacklist dccp
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1
  - DISA-STIG-OL07-00-020101
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.2
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - kernel_module_dccp_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel; then

if LC_ALL=C grep -q -m 1 "^install dccp" /etc/modprobe.d/dccp.conf ; then
	
	sed -i 's#^install dccp.*#install dccp /bin/false#g' /etc/modprobe.d/dccp.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/dccp.conf
	echo "install dccp /bin/false" >> /etc/modprobe.d/dccp.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist dccp$" /etc/modprobe.d/dccp.conf ; then
	echo "blacklist dccp" >> /etc/modprobe.d/dccp.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable SCTP Support   [ref]

The Stream Control Transmission Protocol (SCTP) is a transport layer protocol, designed to support the idea of message-oriented communication, with several streams of messages within one connection. To configure the system to prevent the sctp kernel module from being loaded, add the following line to the file /etc/modprobe.d/sctp.conf:
install sctp /bin/false
To configure the system to prevent the sctp from being used, add the following line to file /etc/modprobe.d/sctp.conf:
blacklist sctp
Rationale:
Disabling SCTP protects the system against exploitation of any flaws in its implementation.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_kernel_module_sctp_disabled
References:
cis-csc11, 14, 3, 9
cjis5.10.1
cobit5BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
cui3.4.6
disaCCI-000381
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nistCM-7(a), CM-7(b), CM-6(a)
nist-csfPR.IP-1, PR.PT-3
pcidssReq-1.4.2
os-srgSRG-OS-000095-GPOS-00049, SRG-OS-000480-GPOS-00227
pcidss41.4.2, 1.4

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.10.1
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.2
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - kernel_module_sctp_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

- name: Ensure kernel module 'sctp' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/sctp.conf
    regexp: install\s+sctp
    line: install sctp /bin/false
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.2
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - kernel_module_sctp_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

- name: Ensure kernel module 'sctp' is blacklisted
  lineinfile:
    create: true
    dest: /etc/modprobe.d/sctp.conf
    regexp: ^blacklist sctp$
    line: blacklist sctp
  when: '"kernel" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.2
  - PCI-DSSv4-1.4
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - kernel_module_sctp_disab