# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { ! ( grep -q aarch64 /proc/sys/kernel/osrelease ); }; then

# Perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do

	# First fix the -EACCES requirement
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS="-F exit=-EACCES"
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="creat open openat open_by_handle_at truncate ftruncate"
	KEY="access"
	SYSCALL_GROUPING="creat open openat open_by_handle_at truncate ftruncate"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

	# Then fix the -EPERM requirement
	# No need to change content of $GROUP variable - it's the same as for -EACCES case above
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS="-F exit=-EPERM"
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="creat open openat open_by_handle_at truncate ftruncate"
	KEY="access"
	SYSCALL_GROUPING="creat open openat open_by_handle_at truncate ftruncate"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi