| Group
Guide to the Secure Configuration of Red Hat Enterprise Linux CoreOS 4
Group contains 23 groups and 51 rules |
| Group
System Settings
Group contains 11 groups and 12 rules |
[ref]
Contains rules that check correct system settings. |
| Group
Installing and Maintaining Software
Group contains 2 groups and 2 rules |
[ref]
The following sections contain information on
security-relevant choices during the initial operating system
installation process and the setup of software
updates. |
| Group
System and Software Integrity
Group contains 1 group and 2 rules |
[ref]
System and software integrity can be gained by installing antivirus, increasing
system encryption strength with FIPS, verifying installed software, enabling SELinux,
installing an Intrusion Prevention System, etc. However, installing or enabling integrity
checking tools cannot prevent intrusions, but they can detect that an intrusion
may have occurred. Requirements for integrity checking may be highly dependent on
the environment in which the system will be used. Snapshot-based approaches such
as AIDE may induce considerable overhead in the presence of frequent software updates. |
| Group
System Cryptographic Policies
Group contains 2 rules |
[ref]
Linux has the capability to centrally configure cryptographic polices. The command
update-crypto-policies is used to set the policy applicable for the various
cryptographic back-ends, such as SSL/TLS libraries. The configured cryptographic
policies will be the default policy used by these backends unless the application
user configures them otherwise. When the system has been configured to use the
centralized cryptographic policies, the administrator is assured that any application
that utilizes the supported backends will follow a policy that adheres to the
configured profile.
Currently the supported backends are:
- GnuTLS library
- OpenSSL library
- NSS library
- OpenJDK
- Libkrb5
- BIND
- OpenSSH
Applications and languages which rely on any of these backends will follow the
system policies as well. Examples are apache httpd, nginx, php, and others. |
Rule
Configure System Cryptography Policy
[ref] | To configure the system cryptography policy to use ciphers only from the DEFAULT:NO-SHA1
policy, create a MachineConfig as follows:
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
metadata:
labels:
machineconfiguration.openshift.io/role: master
name: 50-master-configure-crypto-policy
spec:
config:
ignition:
version: 3.1.0
systemd:
units:
- name: configure-crypto-policy.service
enabled: true
contents: |
[Unit]
Before=kubelet.service
[Service]
Type=oneshot
ExecStart=update-crypto-policies --set DEFAULT:NO-SHA1
RemainAfterExit=yes
[Install]
WantedBy=multi-user.target
This will configure the crypto policy appropriately in all the
nodes labeled with the "master" role.
Note that this needs to be done for each MachineConfigPool
For more information on how to configure nodes with the Machine Config
Operator see
the relevant documentation.
The rule checks if settings for selected crypto policy are configured as expected. Configuration files in the /etc/crypto-policies/back-ends are either symlinks to correct files provided by Crypto-policies package or they are regular files in case crypto policy customizations are applied.
Crypto policies may be customized by crypto policy modules, in which case it is delimited from the base policy using a colon. Warning:
The system needs to be rebooted for these changes to take effect. Warning:
System Crypto Modules must be provided by a vendor that undergoes
FIPS-140 certifications.
FIPS-140 is applicable to all Federal agencies that use
cryptographic-based security systems to protect sensitive information
in computer and telecommunication systems (including voice systems) as
defined in Section 5131 of the Information Technology Management Reform
Act of 1996, Public Law 104-106. This standard shall be used in
designing and implementing cryptographic modules that Federal
departments and agencies operate or are operated for them under
contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf
To meet this, the system has to have cryptographic software provided by
a vendor that has undergone this certification. This means providing
documentation, test results, design information, and independent third
party review by an accredited lab. While open source software is
capable of meeting this, it does not meet FIPS-140 unless the vendor
submits to this process. | | Rationale: | Centralized cryptographic policies simplify applying secure ciphers across an operating system and
the applications that run on that operating system. Use of weak or untested encryption algorithms
undermines the purposes of utilizing encryption to protect data. | | Severity: | high | | Rule ID: | xccdf_org.ssgproject.content_rule_configure_crypto_policy | | Identifiers: | CCE-82541-4 | | References: | | hipaa | 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.312(e)(1), 164.312(e)(2)(ii) | | ism | 1446 | | nerc-cip | CIP-003-8 R4.2, CIP-007-3 R5.1, CIP-007-3 R7.1 | | nist | AC-17(a), AC-17(2), CM-6(a), MA-4(6), SC-13, SC-12(2), SC-12(3) | | ospp | FCS_COP.1(1), FCS_COP.1(2), FCS_COP.1(3), FCS_COP.1(4), FCS_CKM.1, FCS_CKM.2, FCS_TLSC_EXT.1 | | os-srg | SRG-OS-000396-GPOS-00176, SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174 | | pcidss4 | 2.2.7 |
| |
|
Rule
Configure SSH to use System Crypto Policy
[ref] | Crypto Policies provide a centralized control over crypto algorithms usage of many packages.
SSH is supported by crypto policy, but the SSH configuration may be
set up to ignore it.
To check that Crypto Policies settings are configured correctly, ensure that
the CRYPTO_POLICY variable is either commented or not set at all
in the /etc/sysconfig/sshd. | | Rationale: | Overriding the system crypto policy makes the behavior of the SSH service violate expectations,
and makes system configuration more fragmented. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_configure_ssh_crypto_policy | | References: | | disa | CCI-001453 | | hipaa | 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.312(e)(1), 164.312(e)(2)(ii) | | nerc-cip | CIP-003-8 R4.2, CIP-007-3 R5.1, CIP-007-3 R7.1 | | nist | AC-17(a), AC-17(2), CM-6(a), MA-4(6), SC-13 | | ospp | FCS_SSH_EXT.1, FCS_SSHS_EXT.1, FCS_SSHC_EXT.1 | | pcidss | Req-2.2 | | os-srg | SRG-OS-000250-GPOS-00093 | | pcidss4 | 2.2.7 |
| |
|
| Group
Account and Access Control
Group contains 3 groups and 2 rules |
[ref]
In traditional Unix security, if an attacker gains
shell access to a certain login account, they can perform any action
or access any file to which that account has access. Therefore,
making it more difficult for unauthorized people to gain shell
access to accounts, particularly to privileged accounts, is a
necessary part of securing a system. This section introduces
mechanisms for restricting access to accounts under
Red Hat Enterprise Linux CoreOS 4. |
| Group
Protect Accounts by Restricting Password-Based Login
Group contains 2 groups and 2 rules |
[ref]
Conventionally, Unix shell accounts are accessed by
providing a username and password to a login program, which tests
these values for correctness using the /etc/passwd and
/etc/shadow files. Password-based login is vulnerable to
guessing of weak passwords, and to sniffing and man-in-the-middle
attacks against passwords entered over a network or at an insecure
console. Therefore, mechanisms for accessing accounts by entering
usernames and passwords should be restricted to those which are
operationally necessary. |
| Group
Verify Proper Storage and Existence of Password
Hashes
Group contains 1 rule |
[ref]
By default, password hashes for local accounts are stored
in the second field (colon-separated) in
/etc/shadow. This file should be readable only by
processes running with root credentials, preventing users from
casually accessing others' password hashes and attempting
to crack them.
However, it remains possible to misconfigure the system
and store password hashes
in world-readable files such as /etc/passwd, or
to even store passwords themselves in plaintext on the system.
Using system-provided tools for password change/creation
should allow administrators to avoid such misconfiguration. |
Rule
Prevent Login to Accounts With Empty Password
[ref] | If an account is configured for password authentication
but does not have an assigned password, it may be possible to log
into the account without authentication. Remove any instances of the
nullok in
/etc/pam.d/system-auth and
/etc/pam.d/password-auth
to prevent logins with empty passwords. Warning:
If the system relies on authselect tool to manage PAM settings, the remediation
will also use authselect tool. However, if any manual modification was made in
PAM files, the authselect integrity check will fail and the remediation will be
aborted in order to preserve intentional changes. In this case, an informative message will
be shown in the remediation report.
Note that this rule is not applicable for systems running within a
container. Having user with empty password within a container is not
considered a risk, because it should not be possible to directly login into
a container anyway. | | Rationale: | If an account has an empty password, anyone could log in and
run commands with the privileges of that account. Accounts with
empty passwords should never be used in operational environments. | | Severity: | high | | Rule ID: | xccdf_org.ssgproject.content_rule_no_empty_passwords | | Identifiers: | CCE-82553-9 | | References: | | cis-csc | 1, 12, 13, 14, 15, 16, 18, 3, 5 | | cjis | 5.5.2 | | cobit5 | APO01.06, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.10 | | cui | 3.1.1, 3.1.5 | | disa | CCI-000366 | | hipaa | 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii) | | isa-62443-2009 | 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4 | | isa-62443-2013 | SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 5.2 | | iso27001-2013 | A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5 | | nist | IA-5(1)(a), IA-5(c), CM-6(a) | | nist-csf | PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5 | | ospp | FIA_UAU.1 | | pcidss | Req-8.2.3 | | os-srg | SRG-OS-000480-GPOS-00227 | | pcidss4 | 8.3.1 |
| |
|
| Group
Restrict Root Logins
Group contains 1 rule |
[ref]
Direct root logins should be allowed only for emergency use.
In normal situations, the administrator should access the system
via a unique unprivileged account, and then use su or sudo to execute
privileged commands. Discouraging administrators from accessing the
root account directly ensures an audit trail in organizations with
multiple administrators. Locking down the channels through which
root can connect directly also reduces opportunities for
password-guessing against the root account. The login program
uses the file /etc/securetty to determine which interfaces
should allow root logins.
The virtual devices /dev/console
and /dev/tty* represent the system consoles (accessible via
the Ctrl-Alt-F1 through Ctrl-Alt-F6 keyboard sequences on a default
installation). The default securetty file also contains /dev/vc/*.
These are likely to be deprecated in most environments, but may be retained
for compatibility. Root should also be prohibited from connecting
via network protocols. Other sections of this document
include guidance describing how to prevent root from logging in via SSH. |
Rule
Verify Only Root Has UID 0
[ref] | If any account other than root has a UID of 0, this misconfiguration should
be investigated and the accounts other than root should be removed or have
their UID changed.
If the account is associated with system commands or applications the UID
should be changed to one greater than "0" but less than "1000."
Otherwise assign a UID greater than "1000" that has not already been
assigned. | | Rationale: | An account has root authority if it has a UID of 0. Multiple accounts
with a UID of 0 afford more opportunity for potential intruders to
guess a password for a privileged account. Proper configuration of
sudo is recommended to afford multiple system administrators
access to root privileges in an accountable manner. | | Severity: | high | | Rule ID: | xccdf_org.ssgproject.content_rule_accounts_no_uid_except_zero | | Identifiers: | CCE-82699-0 | | References: | | cis-csc | 1, 12, 13, 14, 15, 16, 18, 3, 5 | | cobit5 | APO01.06, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.10 | | cui | 3.1.1, 3.1.5 | | disa | CCI-000366 | | isa-62443-2009 | 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4 | | isa-62443-2013 | SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 5.2 | | iso27001-2013 | A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5 | | nerc-cip | CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3 | | nist | IA-2, AC-6(5), IA-4(b) | | nist-csf | PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5 | | pcidss | Req-8.5 | | os-srg | SRG-OS-000480-GPOS-00227 | | pcidss4 | 8.2.1 |
| |
|
| Group
File Permissions and Masks
Group contains 2 groups and 6 rules |
[ref]
Traditional Unix security relies heavily on file and
directory permissions to prevent unauthorized users from reading or
modifying files to which they should not have access.
Several of the commands in this section search filesystems
for files or directories with certain characteristics, and are
intended to be run on every local partition on a given system.
When the variable PART appears in one of the commands below,
it means that the command is intended to be run repeatedly, with the
name of each local partition substituted for PART in turn.
The following command prints a list of all xfs partitions on the local
system, which is the default filesystem for Red Hat Enterprise Linux CoreOS 4
installations:
$ mount -t xfs | awk '{print $3}'
For any systems that use a different
local filesystem type, modify this command as appropriate. |
| Group
Restrict Programs from Dangerous Execution Patterns
Group contains 1 group and 6 rules |
[ref]
The recommendations in this section are designed to
ensure that the system's features to protect against potentially
dangerous program execution are activated.
These protections are applied at the system initialization or
kernel level, and defend against certain types of badly-configured
or compromised programs. |
| Group
Enable ExecShield
Group contains 2 rules |
[ref]
ExecShield describes kernel features that provide
protection against exploitation of memory corruption errors such as buffer
overflows. These features include random placement of the stack and other
memory regions, prevention of execution in memory that should only hold data,
and special handling of text buffers. These protections are enabled by default
on 32-bit systems and controlled through sysctl variables
kernel.exec-shield and kernel.randomize_va_space. On the latest
64-bit systems, kernel.exec-shield cannot be enabled or disabled with
sysctl. |
Rule
Restrict Exposed Kernel Pointer Addresses Access
[ref] | To set the runtime status of the kernel.kptr_restrict kernel parameter, run the following command: $ sudo sysctl -w kernel.kptr_restrict=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: kernel.kptr_restrict = 1
| | Rationale: | Exposing kernel pointers (through procfs or seq_printf()) exposes kernel
writeable structures which may contain functions pointers. If a write vulnerability
occurs in the kernel, allowing write access to any of this structure, the kernel can
be compromised. This option disallow any program without the CAP_SYSLOG capability
to get the addresses of kernel pointers by replacing them with 0. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_sysctl_kernel_kptr_restrict | | Identifiers: | CCE-82498-7 | | References: | | disa | CCI-002824, CCI-000366 | | nerc-cip | CIP-002-5 R1.1, CIP-002-5 R1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 4.1, CIP-004-6 4.2, CIP-004-6 R2.2.3, CIP-004-6 R2.2.4, CIP-004-6 R2.3, CIP-004-6 R4, CIP-005-6 R1, CIP-005-6 R1.1, CIP-005-6 R1.2, CIP-007-3 R3, CIP-007-3 R3.1, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, CIP-007-3 R8.4, CIP-009-6 R.1.1, CIP-009-6 R4 | | nist | SC-30, SC-30(2), SC-30(5), CM-6(a) | | os-srg | SRG-OS-000132-GPOS-00067, SRG-OS-000433-GPOS-00192, SRG-OS-000480-GPOS-00227 | | anssi | R9 |
| |
|
Rule
Enable Randomized Layout of Virtual Address Space
[ref] | To set the runtime status of the kernel.randomize_va_space kernel parameter, run the following command: $ sudo sysctl -w kernel.randomize_va_space=2
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: kernel.randomize_va_space = 2
| | Rationale: | Address space layout randomization (ASLR) makes it more difficult for an
attacker to predict the location of attack code they have introduced into a
process's address space during an attempt at exploitation. Additionally,
ASLR makes it more difficult for an attacker to know the location of
existing code in order to re-purpose it using return oriented programming
(ROP) techniques. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_sysctl_kernel_randomize_va_space | | Identifiers: | CCE-88128-4 | | References: | | cui | 3.1.7 | | disa | CCI-000366, CCI-002824 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3), 164.308(a)(4), 164.310(b), 164.310(c), 164.312(a), 164.312(e) | | nerc-cip | CIP-002-5 R1.1, CIP-002-5 R1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 4.1, CIP-004-6 4.2, CIP-004-6 R2.2.3, CIP-004-6 R2.2.4, CIP-004-6 R2.3, CIP-004-6 R4, CIP-005-6 R1, CIP-005-6 R1.1, CIP-005-6 R1.2, CIP-007-3 R3, CIP-007-3 R3.1, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, CIP-007-3 R8.4, CIP-009-6 R.1.1, CIP-009-6 R4 | | nist | SC-30, SC-30(2), CM-6(a) | | pcidss | Req-2.2.1 | | os-srg | SRG-OS-000433-GPOS-00193, SRG-OS-000480-GPOS-00227 | | app-srg-ctr | SRG-APP-000450-CTR-001105, CNTR-OS-000810, CNTR-OS-000860, CNTR-OS-000870 | | anssi | R9 | | pcidss4 | 3.3.1.1 |
| |
|
Rule
Restrict Access to Kernel Message Buffer
[ref] | To set the runtime status of the kernel.dmesg_restrict kernel parameter, run the following command: $ sudo sysctl -w kernel.dmesg_restrict=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: kernel.dmesg_restrict = 1
| | Rationale: | Unprivileged access to the kernel syslog can expose sensitive kernel
address information. | | Severity: | low | | Rule ID: | xccdf_org.ssgproject.content_rule_sysctl_kernel_dmesg_restrict | | Identifiers: | CCE-82499-5 | | References: | | cui | 3.1.5 | | disa | CCI-001090, CCI-001314 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3), 164.308(a)(4), 164.310(b), 164.310(c), 164.312(a), 164.312(e) | | nist | SI-11(a), SI-11(b) | | os-srg | SRG-OS-000132-GPOS-00067, SRG-OS-000138-GPOS-00069 | | app-srg-ctr | SRG-APP-000243-CTR-000600, CNTR-OS-000560, CNTR-OS-000570, CNTR-OS-000580, CNTR-OS-000590, CNTR-OS-000600, CNTR-OS-000610 | | anssi | R9 |
| |
|
Rule
Disable Access to Network bpf() Syscall From Unprivileged Processes
[ref] | To set the runtime status of the kernel.unprivileged_bpf_disabled kernel parameter, run the following command: $ sudo sysctl -w kernel.unprivileged_bpf_disabled=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: kernel.unprivileged_bpf_disabled = 1
| | Rationale: | Loading and accessing the packet filters programs and maps using the bpf()
syscall has the potential of revealing sensitive information about the kernel state. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_sysctl_kernel_unprivileged_bpf_disabled | | Identifiers: | CCE-82504-2 | | References: | | |
|
Rule
Restrict usage of ptrace to descendant processes
[ref] | To set the runtime status of the kernel.yama.ptrace_scope kernel parameter, run the following command: $ sudo sysctl -w kernel.yama.ptrace_scope=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: kernel.yama.ptrace_scope = 1
| | Rationale: | Unrestricted usage of ptrace allows compromised binaries to run ptrace
on another processes of the user. Like this, the attacker can steal
sensitive information from the target processes (e.g. SSH sessions, web browser, ...)
without any additional assistance from the user (i.e. without resorting to phishing).
| | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_sysctl_kernel_yama_ptrace_scope | | Identifiers: | CCE-82501-8 | | References: | | |
|
Rule
Harden the operation of the BPF just-in-time compiler
[ref] | To set the runtime status of the net.core.bpf_jit_harden kernel parameter, run the following command: $ sudo sysctl -w net.core.bpf_jit_harden=2
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: net.core.bpf_jit_harden = 2
| | Rationale: | When hardened, the extended Berkeley Packet Filter just-in-time compiler
will randomize any kernel addresses in the BPF programs and maps,
and will not expose the JIT addresses in /proc/kallsyms. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_sysctl_net_core_bpf_jit_harden | | Identifiers: | CCE-82505-9 | | References: | | |
|
| Group
SELinux
Group contains 2 rules |
[ref]
SELinux is a feature of the Linux kernel which can be
used to guard against misconfigured or compromised programs.
SELinux enforces the idea that programs should be limited in what
files they can access and what actions they can take.
The default SELinux policy, as configured on Red Hat Enterprise Linux CoreOS 4, has been
sufficiently developed and debugged that it should be usable on
almost any system with minimal configuration and a small
amount of system administrator training. This policy prevents
system services - including most of the common network-visible
services such as mail servers, FTP servers, and DNS servers - from
accessing files which those services have no valid reason to
access. This action alone prevents a huge amount of possible damage
from network attacks against services, from trojaned software, and
so forth.
This guide recommends that SELinux be enabled using the
default (targeted) policy on every Red Hat Enterprise Linux CoreOS 4 system, unless that
system has unusual requirements which make a stronger policy
appropriate. |
Rule
Configure SELinux Policy
[ref] | The SELinux targeted policy is appropriate for
general-purpose desktops and servers, as well as systems in many other roles.
To configure the system to use this policy, add or correct the following line
in /etc/selinux/config:
SELINUXTYPE=targeted
Other policies, such as mls, provide additional security labeling
and greater confinement but are not compatible with many general-purpose
use cases. | | Rationale: | Setting the SELinux policy to targeted or a more specialized policy
ensures the system will confine processes that are likely to be
targeted for exploitation, such as network or system services.
Note: During the development or debugging of SELinux modules, it is common to
temporarily place non-production systems in permissive mode. In such
temporary cases, SELinux policies should be developed, and once work
is completed, the system should be reconfigured to
targeted. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_selinux_policytype | | Identifiers: | CCE-82532-3 | | References: | | bsi | APP.4.4.A4 | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 18, 3, 4, 5, 6, 8, 9 | | cobit5 | APO01.06, APO11.04, APO13.01, BAI03.05, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.03, DSS06.06, MEA02.01 | | cui | 3.1.2, 3.7.2 | | disa | CCI-002165, CCI-002696 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3), 164.308(a)(4), 164.310(b), 164.310(c), 164.312(a), 164.312(e) | | isa-62443-2009 | 4.2.3.4, 4.3.3.2.2, 4.3.3.3.9, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, 4.4.3.3 | | isa-62443-2013 | SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6 | | iso27001-2013 | A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5 | | nerc-cip | CIP-003-8 R5.1.1, CIP-003-8 R5.2, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-004-6 R3.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, CIP-007-3 R6.5 | | nist | AC-3, AC-3(3)(a), AU-9, SC-7(21) | | nist-csf | DE.AE-1, ID.AM-3, PR.AC-4, PR.AC-5, PR.AC-6, PR.DS-5, PR.PT-1, PR.PT-3, PR.PT-4 | | os-srg | SRG-OS-000445-GPOS-00199 | | app-srg-ctr | SRG-APP-000233-CTR-000585, CNTR-OS-000540 | | anssi | R46, R64 | | pcidss4 | 1.2.6 |
| |
|
Rule
Ensure SELinux State is Enforcing
[ref] | The SELinux state should be set to enforcing at
system boot time. In the file /etc/selinux/config, add or correct the
following line to configure the system to boot into enforcing mode:
SELINUX=enforcing
| | Rationale: | Setting the SELinux state to enforcing ensures SELinux is able to confine
potentially compromised processes to the security policy, which is designed to
prevent them from causing damage to the system or further elevating their
privileges. | | Severity: | high | | Rule ID: | xccdf_org.ssgproject.content_rule_selinux_state | | Identifiers: | CCE-82531-5 | | References: | | bsi | APP.4.4.A4 | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 18, 3, 4, 5, 6, 8, 9 | | cobit5 | APO01.06, APO11.04, APO13.01, BAI03.05, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.03, DSS06.06, MEA02.01 | | cui | 3.1.2, 3.7.2 | | disa | CCI-001084, CCI-002165, CCI-002696 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3), 164.308(a)(4), 164.310(b), 164.310(c), 164.312(a), 164.312(e) | | isa-62443-2009 | 4.2.3.4, 4.3.3.2.2, 4.3.3.3.9, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, 4.4.3.3 | | isa-62443-2013 | SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6 | | iso27001-2013 | A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5 | | nerc-cip | CIP-003-8 R5.1.1, CIP-003-8 R5.2, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-004-6 R3.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, CIP-007-3 R6.5 | | nist | AC-3, AC-3(3)(a), AU-9, SC-7(21) | | nist-csf | DE.AE-1, ID.AM-3, PR.AC-4, PR.AC-5, PR.AC-6, PR.DS-5, PR.PT-1, PR.PT-3, PR.PT-4 | | os-srg | SRG-OS-000445-GPOS-00199, SRG-OS-000134-GPOS-00068 | | anssi | R37, R79 | | pcidss4 | 1.2.6 | | app-srg-ctr | CNTR-OS-000540 |
| |
|
| Group
Services
Group contains 2 groups and 9 rules |
[ref]
The best protection against vulnerable software is running less software. This section describes how to review
the software which Red Hat Enterprise Linux CoreOS 4 installs on a system and disable software which is not needed. It
then enumerates the software packages installed on a default Red Hat Enterprise Linux CoreOS 4 system and provides guidance about which
ones can be safely disabled.
Red Hat Enterprise Linux CoreOS 4 provides a convenient minimal install option that essentially installs the bare necessities for a functional
system. When building Red Hat Enterprise Linux CoreOS 4 systems, it is highly recommended to select the minimal packages and then build up
the system from there. |
| Group
SSH Server
Group contains 1 group and 9 rules |
[ref]
The SSH protocol is recommended for remote login and
remote file transfer. SSH provides confidentiality and integrity
for data exchanged between two systems, as well as server
authentication, through the use of public key cryptography. The
implementation included with the system is called OpenSSH, and more
detailed documentation is available from its website,
https://www.openssh.com.
Its server program is called sshd and provided by the RPM package
openssh-server. |
| Group
Configure OpenSSH Server if Necessary
Group contains 9 rules |
[ref]
If the system needs to act as an SSH server, then
certain changes should be made to the OpenSSH daemon configuration
file /etc/ssh/sshd_config. The following recommendations can be
applied to this file. See the sshd_config(5) man page for more
detailed information. |
Rule
Disable SSH Access via Empty Passwords
[ref] | Disallow SSH login with empty passwords.
The default SSH configuration disables logins with empty passwords. The appropriate
configuration is used if no value is set for PermitEmptyPasswords.
To explicitly disallow SSH login from accounts with empty passwords,
add or correct the following line in
/etc/ssh/sshd_config:
PermitEmptyPasswords no
Any accounts with empty passwords should be disabled immediately, and PAM configuration
should prevent users from being able to assign themselves empty passwords. | | Rationale: | Configuring this setting for the SSH daemon provides additional assurance
that remote login via SSH will require a password, even in the event of
misconfiguration elsewhere. | | Severity: | high | | Rule ID: | xccdf_org.ssgproject.content_rule_sshd_disable_empty_passwords | | References: | | cis-csc | 11, 12, 13, 14, 15, 16, 18, 3, 5, 9 | | cjis | 5.5.6 | | cobit5 | APO01.06, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.03, DSS06.06 | | cui | 3.1.1, 3.1.5 | | disa | CCI-000366, CCI-000766 | | hipaa | 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii) | | isa-62443-2009 | 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3 | | isa-62443-2013 | SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 5.2, SR 7.6 | | iso27001-2013 | A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5 | | nist | AC-17(a), CM-7(a), CM-7(b), CM-6(a) | | nist-csf | PR.AC-4, PR.AC-6, PR.DS-5, PR.IP-1, PR.PT-3 | | ospp | FIA_UAU.1 | | pcidss | Req-2.2.4 | | os-srg | SRG-OS-000106-GPOS-00053, SRG-OS-000480-GPOS-00229, SRG-OS-000480-GPOS-00227 | | pcidss4 | 2.2.6 |
| |
|
Rule
Disable GSSAPI Authentication
[ref] | Unless needed, SSH should not permit extraneous or unnecessary
authentication mechanisms like GSSAPI.
The default SSH configuration disallows authentications based on GSSAPI. The appropriate
configuration is used if no value is set for GSSAPIAuthentication.
To explicitly disable GSSAPI authentication, add or correct the following line in
/etc/ssh/sshd_config:
GSSAPIAuthentication no
| | Rationale: | GSSAPI authentication is used to provide additional authentication mechanisms to
applications. Allowing GSSAPI authentication through SSH exposes the system's
GSSAPI to remote hosts, increasing the attack surface of the system. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_sshd_disable_gssapi_auth | | References: | | cis-csc | 11, 3, 9 | | cobit5 | BAI10.01, BAI10.02, BAI10.03, BAI10.05 | | cui | 3.1.12 | | disa | CCI-000318, CCI-000368, CCI-001812, CCI-001813, CCI-001814, CCI-000366 | | hipaa | 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii) | | isa-62443-2009 | 4.3.4.3.2, 4.3.4.3.3 | | isa-62443-2013 | SR 7.6 | | ism | 0418, 1055, 1402 | | iso27001-2013 | A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4 | | nist | CM-7(a), CM-7(b), CM-6(a), AC-17(a) | | nist-csf | PR.IP-1 | | ospp | FTP_ITC_EXT.1, FCS_SSH_EXT.1.2 | | os-srg | SRG-OS-000364-GPOS-00151, SRG-OS-000480-GPOS-00227 |
| |
|
Rule
Disable SSH Support for .rhosts Files
[ref] | SSH can emulate the behavior of the obsolete rsh
command in allowing users to enable insecure access to their
accounts via .rhosts files.
The default SSH configuration disables support for .rhosts. The appropriate
configuration is used if no value is set for IgnoreRhosts.
To explicitly disable support for .rhosts files, add or correct the following line in
/etc/ssh/sshd_config:
IgnoreRhosts yes
| | Rationale: | SSH trust relationships mean a compromise on one host
can allow an attacker to move trivially to other hosts. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_sshd_disable_rhosts | | Identifiers: | CCE-82665-1 | | References: | | cis-csc | 11, 12, 14, 15, 16, 18, 3, 5, 9 | | cjis | 5.5.6 | | cobit5 | BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06 | | cui | 3.1.12 | | disa | CCI-000366 | | isa-62443-2009 | 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3 | | isa-62443-2013 | SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6 | | iso27001-2013 | A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5 | | nist | AC-17(a), CM-7(a), CM-7(b), CM-6(a) | | nist-csf | PR.AC-4, PR.AC-6, PR.IP-1, PR.PT-3 | | ospp | FIA_UAU.1 | | os-srg | SRG-OS-000480-GPOS-00227 | | pcidss4 | 2.2.6 |
| |
|
Rule
Disable SSH Root Login
[ref] | The root user should never be allowed to login to a
system directly over a network.
To disable root login via SSH, add or correct the following line in
/etc/ssh/sshd_config:
PermitRootLogin no
| | Rationale: | Even though the communications channel may be encrypted, an additional layer of
security is gained by extending the policy of not logging directly on as root.
In addition, logging in with a user-specific account provides individual
accountability of actions performed on the system and also helps to minimize
direct attack attempts on root's password. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_sshd_disable_root_login | | Identifiers: | CCE-89550-8 | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 18, 3, 5 | | cjis | 5.5.6 | | cobit5 | APO01.06, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.06, DSS06.10 | | cui | 3.1.1, 3.1.5 | | disa | CCI-000366, CCI-000770 | | hipaa | 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii) | | isa-62443-2009 | 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4 | | isa-62443-2013 | SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 5.2 | | iso27001-2013 | A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5 | | nerc-cip | CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3 | | nist | AC-6(2), AC-17(a), IA-2, IA-2(5), CM-7(a), CM-7(b), CM-6(a) | | nist-csf | PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5, PR.PT-3 | | ospp | FAU_GEN.1 | | pcidss | Req-2.2.4 | | os-srg | SRG-OS-000109-GPOS-00056, SRG-OS-000480-GPOS-00227 | | app-srg-ctr | SRG-APP-000148-CTR-000335, SRG-APP-000190-CTR-000500, CNTR-OS-000400, CNTR-OS-000490 | | anssi | R33 | | pcidss4 | 2.2.6 |
| |
|
Rule
Disable SSH Support for User Known Hosts
[ref] | SSH can allow system users to connect to systems if a cache of the remote
systems public keys is available. This should be disabled.
To ensure this behavior is disabled, add or correct the following line in
/etc/ssh/sshd_config:
IgnoreUserKnownHosts yes
| | Rationale: | Configuring this setting for the SSH daemon provides additional
assurance that remote login via SSH will require a password, even
in the event of misconfiguration elsewhere. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_sshd_disable_user_known_hosts | | References: | | cis-csc | 11, 3, 9 | | cobit5 | BAI10.01, BAI10.02, BAI10.03, BAI10.05 | | cui | 3.1.12 | | disa | CCI-000366 | | hipaa | 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii) | | isa-62443-2009 | 4.3.4.3.2, 4.3.4.3.3 | | isa-62443-2013 | SR 7.6 | | iso27001-2013 | A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4 | | nist | AC-17(a), CM-7(a), CM-7(b), CM-6(a) | | nist-csf | PR.IP-1 | | ospp | FIA_UAU.1 | | os-srg | SRG-OS-000480-GPOS-00227 |
| |
|
Rule
Do Not Allow SSH Environment Options
[ref] | Ensure that users are not able to override environment variables of the SSH daemon.
The default SSH configuration disables environment processing. The appropriate
configuration is used if no value is set for PermitUserEnvironment.
To explicitly disable Environment options, add or correct the following
/etc/ssh/sshd_config:
PermitUserEnvironment no
| | Rationale: | SSH environment options potentially allow users to bypass
access restriction in some configurations. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_sshd_do_not_permit_user_env | | References: | | cis-csc | 11, 3, 9 | | cjis | 5.5.6 | | cobit5 | BAI10.01, BAI10.02, BAI10.03, BAI10.05 | | cui | 3.1.12 | | disa | CCI-000366 | | hipaa | 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii) | | isa-62443-2009 | 4.3.4.3.2, 4.3.4.3.3 | | isa-62443-2013 | SR 7.6 | | iso27001-2013 | A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4 | | nist | AC-17(a), CM-7(a), CM-7(b), CM-6(a) | | nist-csf | PR.IP-1 | | pcidss | Req-2.2.4 | | os-srg | SRG-OS-000480-GPOS-00229 | | pcidss4 | 2.2.6 |
| |
|
Rule
Enable Use of Strict Mode Checking
[ref] | SSHs StrictModes option checks file and ownership permissions in
the user's home directory .ssh folder before accepting login. If world-
writable permissions are found, logon is rejected.
The default SSH configuration has StrictModes enabled. The appropriate
configuration is used if no value is set for StrictModes.
To explicitly enable StrictModes in SSH, add or correct the following line in
/etc/ssh/sshd_config:
StrictModes yes
| | Rationale: | If other users have access to modify user-specific SSH configuration files, they
may be able to log into the system as another user. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_sshd_enable_strictmodes | | References: | | cis-csc | 12, 13, 14, 15, 16, 18, 3, 5 | | cobit5 | APO01.06, DSS05.04, DSS05.07, DSS06.02 | | cui | 3.1.12 | | disa | CCI-000366 | | hipaa | 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii) | | isa-62443-2009 | 4.3.3.7.3 | | isa-62443-2013 | SR 2.1, SR 5.2 | | iso27001-2013 | A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5 | | nerc-cip | CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2 | | nist | AC-6, AC-17(a), CM-6(a) | | nist-csf | PR.AC-4, PR.DS-5 | | os-srg | SRG-OS-000480-GPOS-00227 |
| |
|
Rule
Enable SSH Print Last Log
[ref] | Ensure that SSH will display the date and time of the last successful account logon.
The default SSH configuration enables print of the date and time of the last login.
The appropriate configuration is used if no value is set for PrintLastLog.
To explicitly enable LastLog in SSH, add or correct the following line in
/etc/ssh/sshd_config:
PrintLastLog yes
| | Rationale: | Providing users feedback on when account accesses last occurred facilitates user
recognition and reporting of unauthorized account use. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_sshd_print_last_log | | References: | | cis-csc | 1, 12, 15, 16 | | cobit5 | DSS05.04, DSS05.10, DSS06.10 | | disa | CCI-000052 | | isa-62443-2009 | 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9 | | isa-62443-2013 | SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9 | | iso27001-2013 | A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3 | | nist | AC-9, AC-9(1) | | nist-csf | PR.AC-7 | | os-srg | SRG-OS-000480-GPOS-00227 |
| |
|
Rule
Set LogLevel to INFO
[ref] | The INFO parameter specifices that record login and logout activity will be logged.
The default SSH configuration sets the log level to INFO. The appropriate
configuration is used if no value is set for LogLevel.
To explicitly specify the log level in SSH, add or correct the following line in
/etc/ssh/sshd_config:
LogLevel INFO
| | Rationale: | SSH provides several logging levels with varying amounts of verbosity. DEBUG is specifically
not recommended other than strictly for debugging SSH communications since it provides
so much data that it is difficult to identify important security information. INFO level is the
basic level that only records login activity of SSH users. In many situations, such as Incident
Response, it is important to determine when a particular user was active on a system. The
logout record can eliminate those users who disconnected, which helps narrow the field. | | Severity: | low | | Rule ID: | xccdf_org.ssgproject.content_rule_sshd_set_loglevel_info | | References: | | |
|
| Group
System Accounting with auditd
Group contains 7 groups and 30 rules |
[ref]
The audit service provides substantial capabilities
for recording system activities. By default, the service audits about
SELinux AVC denials and certain types of security-relevant events
such as system logins, account modifications, and authentication
events performed by programs such as sudo.
Under its default configuration, auditd has modest disk space
requirements, and should not noticeably impact system performance.
NOTE: The Linux Audit daemon auditd can be configured to use
the augenrules program to read audit rules files ( *.rules)
located in /etc/audit/rules.d location and compile them to create
the resulting form of the /etc/audit/audit.rules configuration file
during the daemon startup (default configuration). Alternatively, the auditd
daemon can use the auditctl utility to read audit rules from the
/etc/audit/audit.rules configuration file during daemon startup,
and load them into the kernel. The expected behavior is configured via the
appropriate ExecStartPost directive setting in the
/usr/lib/systemd/system/auditd.service configuration file.
To instruct the auditd daemon to use the augenrules program
to read audit rules (default configuration), use the following setting:
ExecStartPost=-/sbin/augenrules --load
in the /usr/lib/systemd/system/auditd.service configuration file.
In order to instruct the auditd daemon to use the auditctl
utility to read audit rules, use the following setting:
ExecStartPost=-/sbin/auditctl -R /etc/audit/audit.rules
in the /usr/lib/systemd/system/auditd.service configuration file.
Refer to [Service] section of the /usr/lib/systemd/system/auditd.service
configuration file for further details.
Government networks often have substantial auditing
requirements and auditd can be configured to meet these
requirements.
Examining some example audit records demonstrates how the Linux audit system
satisfies common requirements.
The following example from Red Hat Enterprise Linux 7 Documentation available at
https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html-single/selinux_users_and_administrators_guide/index#sect-Security-Enhanced_Linux-Fixing_Problems-Raw_Audit_Messages
shows the substantial amount of information captured in a
two typical "raw" audit messages, followed by a breakdown of the most important
fields. In this example the message is SELinux-related and reports an AVC
denial (and the associated system call) that occurred when the Apache HTTP
Server attempted to access the /var/www/html/file1 file (labeled with
the samba_share_t type):
type=AVC msg=audit(1226874073.147:96): avc: denied { getattr } for pid=2465 comm="httpd"
path="/var/www/html/file1" dev=dm-0 ino=284133 scontext=unconfined_u:system_r:httpd_t:s0
tcontext=unconfined_u:object_r:samba_share_t:s0 tclass=file
type=SYSCALL msg=audit(1226874073.147:96): arch=40000003 syscall=196 success=no exit=-13
a0=b98df198 a1=bfec85dc a2=54dff4 a3=2008171 items=0 ppid=2463 pid=2465 auid=502 uid=48
gid=48 euid=48 suid=48 fsuid=48 egid=48 sgid=48 fsgid=48 tty=(none) ses=6 comm="httpd"
exe="/usr/sbin/httpd" subj=unconfined_u:system_r:httpd_t:s0 key=(null)
msg=audit(1226874073.147:96)- The number in parentheses is the unformatted time stamp (Epoch time)
for the event, which can be converted to standard time by using the
date command.
{ getattr }- The item in braces indicates the permission that was denied.
getattr
indicates the source process was trying to read the target file's status information.
This occurs before reading files. This action is denied due to the file being
accessed having the wrong label. Commonly seen permissions include getattr,
read, and write.
comm="httpd"- The executable that launched the process. The full path of the executable is
found in the
exe= section of the system call (SYSCALL) message,
which in this case, is exe="/usr/sbin/httpd".
path="/var/www/html/file1"- The path to the object (target) the process attempted to access.
scontext="unconfined_u:system_r:httpd_t:s0"- The SELinux context of the process that attempted the denied action. In
this case, it is the SELinux context of the Apache HTTP Server, which is running
in the
httpd_t domain.
tcontext="unconfined_u:object_r:samba_share_t:s0"- The SELinux context of the object (target) the process attempted to access.
In this case, it is the SELinux context of
file1. Note: the samba_share_t
type is not accessible to processes running in the httpd_t domain.
- From the system call (
SYSCALL) message, two items are of interest:
success=no: indicates whether the denial (AVC) was enforced or not.
success=no indicates the system call was not successful (SELinux denied
access). success=yes indicates the system call was successful - this can
be seen for permissive domains or unconfined domains, such as initrc_t
and kernel_t.
exe="/usr/sbin/httpd": the full path to the executable that launched
the process, which in this case, is exe="/usr/sbin/httpd".
|
| Group
Configure auditd Rules for Comprehensive Auditing
Group contains 5 groups and 23 rules |
[ref]
The auditd program can perform comprehensive
monitoring of system activity. This section describes recommended
configuration settings for comprehensive auditing, but a full
description of the auditing system's capabilities is beyond the
scope of this guide. The mailing list linux-audit@redhat.com exists
to facilitate community discussion of the auditing system.
The audit subsystem supports extensive collection of events, including:
- Tracing of arbitrary system calls (identified by name or number)
on entry or exit.
- Filtering by PID, UID, call success, system call argument (with
some limitations), etc.
- Monitoring of specific files for modifications to the file's
contents or metadata.
Auditing rules at startup are controlled by the file /etc/audit/audit.rules.
Add rules to it to meet the auditing requirements for your organization.
Each line in /etc/audit/audit.rules represents a series of arguments
that can be passed to auditctl and can be individually tested
during runtime. See documentation in /usr/share/doc/audit-VERSION
and
in the related man pages for more details.
If copying any example audit rulesets from /usr/share/doc/audit-VERSION,
be sure to comment out the
lines containing arch= which are not appropriate for your system's
architecture. Then review and understand the following rules,
ensuring rules are activated as needed for the appropriate
architecture.
After reviewing all the rules, reading the following sections, and
editing as needed, the new rules can be activated as follows:
$ sudo service auditd restart
|
| Group
Record Events that Modify the System's Discretionary Access Controls
Group contains 2 rules |
[ref]
At a minimum, the audit system should collect file permission
changes for all users and root. Note that the "-F arch=b32" lines should be
present even on a 64 bit system. These commands identify system calls for
auditing. Even if the system is 64 bit it can still execute 32 bit system
calls. Additionally, these rules can be configured in a number of ways while
still achieving the desired effect. An example of this is that the "-S" calls
could be split up and placed on separate lines, however, this is less efficient.
Add the following to /etc/audit/audit.rules:
-a always,exit -F arch=b32 -S chmod,fchmod,fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b32 -S chown,fchown,fchownat,lchown -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b32 -S setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod
If your system is 64 bit then these lines should be duplicated and the
arch=b32 replaced with arch=b64 as follows:
-a always,exit -F arch=b64 -S chmod,fchmod,fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b64 -S chown,fchown,fchownat,lchown -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b64 -S setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod
|
Rule
Record Events that Modify the System's Discretionary Access Controls - chmod
[ref] | At a minimum, the audit system should collect file permission
changes for all users and root. If the auditd daemon is configured to
use the augenrules program to read audit rules during daemon startup
(the default), add the following line to a file with suffix .rules in
the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following line to
/etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
Warning:
Note that these rules can be configured in a
number of ways while still achieving the desired effect. Here the system calls
have been placed independent of other system calls. Grouping these system
calls with others as identifying earlier in this guide is more efficient. | | Rationale: | The changing of file permissions could indicate that a user is attempting to
gain access to information that would otherwise be disallowed. Auditing DAC modifications
can facilitate the identification of patterns of abuse among both authorized and
unauthorized users. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_chmod | | Identifiers: | CCE-82556-2 | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9 | | cjis | 5.4.1.1 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-000126, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6 | | iso27001-2013 | A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2 | | nist | AU-2(d), AU-12(c), CM-6(a) | | nist-csf | DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4 | | ospp | FAU_GEN.1.1.c | | pcidss | Req-10.5.5 | | os-srg | SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000466-GPOS-00210, SRG-OS-000458-GPOS-00203 | | app-srg-ctr | SRG-APP-000091-CTR-000160, SRG-APP-000492-CTR-001220, SRG-APP-000493-CTR-001225, SRG-APP-000494-CTR-001230, SRG-APP-000500-CTR-001260, SRG-APP-000507-CTR-001295, SRG-APP-000495-CTR-001235, SRG-APP-000499-CTR-001255, CNTR-OS-000160, CNTR-OS-000930, CNTR-OS-000950 | | anssi | R73 | | pcidss4 | 10.3.4 |
| |
|
Rule
Record Events that Modify the System's Discretionary Access Controls - chown
[ref] | At a minimum, the audit system should collect file permission
changes for all users and root. If the auditd daemon is configured to
use the augenrules program to read audit rules during daemon startup
(the default), add the following line to a file with suffix .rules in
the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following line to
/etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
Warning:
Note that these rules can be configured in a
number of ways while still achieving the desired effect. Here the system calls
have been placed independent of other system calls. Grouping these system
calls with others as identifying earlier in this guide is more efficient. | | Rationale: | The changing of file permissions could indicate that a user is attempting to
gain access to information that would otherwise be disallowed. Auditing DAC modifications
can facilitate the identification of patterns of abuse among both authorized and
unauthorized users. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_chown | | Identifiers: | CCE-82557-0 | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9 | | cjis | 5.4.1.1 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-000126, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6 | | iso27001-2013 | A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2 | | nist | AU-2(d), AU-12(c), CM-6(a) | | nist-csf | DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4 | | ospp | FAU_GEN.1.1.c | | pcidss | Req-10.5.5 | | os-srg | SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000466-GPOS-00210, SRG-OS-000458-GPOS-00203, SRG-OS-000474-GPOS-00219 | | app-srg-ctr | SRG-APP-000091-CTR-000160, SRG-APP-000492-CTR-001220, SRG-APP-000493-CTR-001225, SRG-APP-000494-CTR-001230, SRG-APP-000500-CTR-001260, SRG-APP-000507-CTR-001295, SRG-APP-000495-CTR-001235, SRG-APP-000499-CTR-001255, CNTR-OS-000160, CNTR-OS-000930, CNTR-OS-000950 | | anssi | R73 | | pcidss4 | 10.3.4 |
| |
|
| Group
Record Execution Attempts to Run SELinux Privileged Commands
Group contains 6 rules |
[ref]
At a minimum, the audit system should collect the execution of
SELinux privileged commands for all users and root. |
Rule
Record Any Attempts to Run chcon
[ref] | At a minimum, the audit system should collect any execution attempt
of the chcon command for all users and root. If the auditd
daemon is configured to use the augenrules program to read audit rules
during daemon startup (the default), add the following lines to a file with suffix
.rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/bin/chcon -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following lines to
/etc/audit/audit.rules file:
-a always,exit -F path=/usr/bin/chcon -F auid>=1000 -F auid!=unset -F key=privileged
| | Rationale: | Misuse of privileged functions, either intentionally or unintentionally by
authorized users, or by unauthorized external entities that have compromised system accounts,
is a serious and ongoing concern and can have significant adverse impacts on organizations.
Auditing the use of privileged functions is one way to detect such misuse and identify
the risk from insider and advanced persistent threats.
Privileged programs are subject to escalation-of-privilege attacks,
which attempt to subvert their normal role of providing some necessary but
limited capability. As such, motivation exists to monitor these programs for
unusual activity. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_execution_chcon | | Identifiers: | CCE-82569-5 | | References: | | cis-csc | 1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2 | | iso27001-2013 | A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2 | | nist | AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1 | | ospp | FAU_GEN.1.1.c | | os-srg | SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000468-GPOS-00212, SRG-OS-000471-GPOS-00215, SRG-OS-000463-GPOS-00207, SRG-OS-000465-GPOS-00209 | | app-srg-ctr | SRG-APP-000495-CTR-001235, SRG-APP-000496-CTR-001240, SRG-APP-000497-CTR-001245, SRG-APP-000498-CTR-001250, SRG-APP-000501-CTR-001265, SRG-APP-000502-CTR-001270, CNTR-OS-000930, CNTR-OS-000940, CNTR-OS-000960 |
| |
|
Rule
Record Any Attempts to Run restorecon
[ref] | At a minimum, the audit system should collect any execution attempt
of the restorecon command for all users and root. If the auditd
daemon is configured to use the augenrules program to read audit rules
during daemon startup (the default), add the following lines to a file with suffix
.rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/restorecon -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following lines to
/etc/audit/audit.rules file:
-a always,exit -F path=/usr/sbin/restorecon -F auid>=1000 -F auid!=unset -F key=privileged
| | Rationale: | Misuse of privileged functions, either intentionally or unintentionally by
authorized users, or by unauthorized external entities that have compromised system accounts,
is a serious and ongoing concern and can have significant adverse impacts on organizations.
Auditing the use of privileged functions is one way to detect such misuse and identify
the risk from insider and advanced persistent threats.
Privileged programs are subject to escalation-of-privilege attacks,
which attempt to subvert their normal role of providing some necessary but
limited capability. As such, motivation exists to monitor these programs for
unusual activity. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_execution_restorecon | | Identifiers: | CCE-82570-3 | | References: | | cis-csc | 1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-000172, CCI-002884 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2 | | iso27001-2013 | A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2 | | nist | AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1 | | ospp | FAU_GEN.1.1.c | | os-srg | SRG-OS-000392-GPOS-00172, SRG-OS-000463-GPOS-00207, SRG-OS-000465-GPOS-00209 |
| |
|
Rule
Record Any Attempts to Run semanage
[ref] | At a minimum, the audit system should collect any execution attempt
of the semanage command for all users and root. If the auditd
daemon is configured to use the augenrules program to read audit rules
during daemon startup (the default), add the following lines to a file with suffix
.rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/semanage -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following lines to
/etc/audit/audit.rules file:
-a always,exit -F path=/usr/sbin/semanage -F auid>=1000 -F auid!=unset -F key=privileged
| | Rationale: | Misuse of privileged functions, either intentionally or unintentionally by
authorized users, or by unauthorized external entities that have compromised system accounts,
is a serious and ongoing concern and can have significant adverse impacts on organizations.
Auditing the use of privileged functions is one way to detect such misuse and identify
the risk from insider and advanced persistent threats.
Privileged programs are subject to escalation-of-privilege attacks,
which attempt to subvert their normal role of providing some necessary but
limited capability. As such, motivation exists to monitor these programs for
unusual activity. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_execution_semanage | | Identifiers: | CCE-82571-1 | | References: | | cis-csc | 1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-000169, CCI-000172, CCI-002884 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2 | | iso27001-2013 | A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2 | | nerc-cip | CIP-004-6 R2.2.2, CIP-004-6 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3 | | nist | AC-2(4), AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1 | | ospp | FAU_GEN.1.1.c | | os-srg | SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000463-GPOS-00207, SRG-OS-000465-GPOS-00209 | | app-srg-ctr | SRG-APP-000495-CTR-001235, SRG-APP-000496-CTR-001240, SRG-APP-000497-CTR-001245, SRG-APP-000498-CTR-001250, CNTR-OS-000930, CNTR-OS-000940 |
| |
|
Rule
Record Any Attempts to Run setfiles
[ref] | At a minimum, the audit system should collect any execution attempt
of the setfiles command for all users and root. If the auditd
daemon is configured to use the augenrules program to read audit rules
during daemon startup (the default), add the following lines to a file with suffix
.rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/setfiles -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following lines to
/etc/audit/audit.rules file:
-a always,exit -F path=/usr/sbin/setfiles -F auid>=1000 -F auid!=unset -F key=privileged
| | Rationale: | Misuse of privileged functions, either intentionally or unintentionally by
authorized users, or by unauthorized external entities that have compromised system accounts,
is a serious and ongoing concern and can have significant adverse impacts on organizations.
Auditing the use of privileged functions is one way to detect such misuse and identify
the risk from insider and advanced persistent threats.
Privileged programs are subject to escalation-of-privilege attacks,
which attempt to subvert their normal role of providing some necessary but
limited capability. As such, motivation exists to monitor these programs for
unusual activity. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_execution_setfiles | | Identifiers: | CCE-82572-9 | | References: | | disa | CCI-000169, CCI-000172, CCI-002884 | | nist | AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | os-srg | SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000463-GPOS-00207, SRG-OS-000465-GPOS-00209 | | app-srg-ctr | SRG-APP-000495-CTR-001235, SRG-APP-000496-CTR-001240, SRG-APP-000497-CTR-001245, SRG-APP-000498-CTR-001250, CNTR-OS-000930, CNTR-OS-000940 |
| |
|
Rule
Record Any Attempts to Run setsebool
[ref] | At a minimum, the audit system should collect any execution attempt
of the setsebool command for all users and root. If the auditd
daemon is configured to use the augenrules program to read audit rules
during daemon startup (the default), add the following lines to a file with suffix
.rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/setsebool -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following lines to
/etc/audit/audit.rules file:
-a always,exit -F path=/usr/sbin/setsebool -F auid>=1000 -F auid!=unset -F key=privileged
| | Rationale: | Misuse of privileged functions, either intentionally or unintentionally by
authorized users, or by unauthorized external entities that have compromised system accounts,
is a serious and ongoing concern and can have significant adverse impacts on organizations.
Auditing the use of privileged functions is one way to detect such misuse and identify
the risk from insider and advanced persistent threats.
Privileged programs are subject to escalation-of-privilege attacks,
which attempt to subvert their normal role of providing some necessary but
limited capability. As such, motivation exists to monitor these programs for
unusual activity. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_execution_setsebool | | Identifiers: | CCE-82573-7 | | References: | | cis-csc | 1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2 | | iso27001-2013 | A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2 | | nist | AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1 | | ospp | FAU_GEN.1.1.c | | os-srg | SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000463-GPOS-00207, SRG-OS-000465-GPOS-00209 | | app-srg-ctr | SRG-APP-000495-CTR-001235, SRG-APP-000496-CTR-001240, SRG-APP-000497-CTR-001245, SRG-APP-000498-CTR-001250, CNTR-OS-000930, CNTR-OS-000940 |
| |
|
Rule
Record Any Attempts to Run seunshare
[ref] | At a minimum, the audit system should collect any execution attempt
of the seunshare command for all users and root. If the auditd
daemon is configured to use the augenrules program to read audit rules
during daemon startup (the default), add the following lines to a file with suffix
.rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/seunshare -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following lines to
/etc/audit/audit.rules file:
-a always,exit -F path=/usr/sbin/seunshare -F auid>=1000 -F auid!=unset -F key=privileged
| | Rationale: | Misuse of privileged functions, either intentionally or unintentionally by
authorized users, or by unauthorized external entities that have compromised system accounts,
is a serious and ongoing concern and can have significant adverse impacts on organizations.
Auditing the use of privileged functions is one way to detect such misuse and identify
the risk from insider and advanced persistent threats.
Privileged programs are subject to escalation-of-privilege attacks,
which attempt to subvert their normal role of providing some necessary but
limited capability. As such, motivation exists to monitor these programs for
unusual activity. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_execution_seunshare | | Identifiers: | CCE-82574-5 | | References: | | disa | CCI-000172 | | nist | AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | ospp | FAU_GEN.1.1.c |
| |
|
| Group
Record Information on Kernel Modules Loading and Unloading
Group contains 3 rules |
[ref]
To capture kernel module loading and unloading events, use following lines, setting ARCH to
either b32 for 32-bit system, or having two lines for both b32 and b64 in case your system is 64-bit:
-a always,exit -F arch=ARCH -S init_module,delete_module -F key=modules
Place to add the lines depends on a way auditd daemon is configured. If it is configured
to use the augenrules program (the default), add the lines to a file with suffix
.rules in the directory /etc/audit/rules.d.
If the auditd daemon is configured to use the auditctl utility,
add the lines to file /etc/audit/audit.rules. |
Rule
Ensure auditd Collects Information on Kernel Module Unloading - delete_module
[ref] | To capture kernel module unloading events, use following line, setting ARCH to
either b32 for 32-bit system, or having two lines for both b32 and b64 in case your system is 64-bit:
-a always,exit -F arch=ARCH -S delete_module -F key=modules
Place to add the line depends on a way auditd daemon is configured. If it is configured
to use the augenrules program (the default), add the line to a file with suffix
.rules in the directory /etc/audit/rules.d.
If the auditd daemon is configured to use the auditctl utility,
add the line to file /etc/audit/audit.rules. | | Rationale: | The removal of kernel modules can be used to alter the behavior of
the kernel and potentially introduce malicious code into kernel space. It is important
to have an audit trail of modules that have been introduced into the kernel. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_kernel_module_loading_delete | | Identifiers: | CCE-82580-2 | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6 | | iso27001-2013 | A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2 | | nist | AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4 | | ospp | FAU_GEN.1.1.c | | pcidss | Req-10.2.7 | | os-srg | SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000471-GPOS-00216, SRG-OS-000477-GPOS-00222 | | app-srg-ctr | SRG-APP-000495-CTR-001235, SRG-APP-000504-CTR-001280, CNTR-OS-000930, CNTR-OS-000980 | | anssi | R73 |
| |
|
Rule
Ensure auditd Collects Information on Kernel Module Loading and Unloading - finit_module
[ref] | If the auditd daemon is configured to use the augenrules program
to read audit rules during daemon startup (the default), add the following lines to a file
with suffix .rules in the directory /etc/audit/rules.d to capture kernel module
loading and unloading events, setting ARCH to either b32 or b64 as appropriate for your system:
-a always,exit -F arch=ARCH -S finit_module -F key=modules
If the auditd daemon is configured to use the auditctl utility to read audit
rules during daemon startup, add the following lines to /etc/audit/audit.rules file
in order to capture kernel module loading and unloading events, setting ARCH to either b32 or
b64 as appropriate for your system:
-a always,exit -F arch=ARCH -S finit_module -F key=modules
| | Rationale: | The addition/removal of kernel modules can be used to alter the behavior of
the kernel and potentially introduce malicious code into kernel space. It is important
to have an audit trail of modules that have been introduced into the kernel. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_kernel_module_loading_finit | | Identifiers: | CCE-82581-0 | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6 | | iso27001-2013 | A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2 | | nist | AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4 | | ospp | FAU_GEN.1.1.c | | pcidss | Req-10.2.7 | | os-srg | SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000471-GPOS-00216, SRG-OS-000477-GPOS-00222 | | app-srg-ctr | SRG-APP-000495-CTR-001235, SRG-APP-000504-CTR-001280, CNTR-OS-000930, CNTR-OS-000980 | | anssi | R73 |
| |
|
Rule
Ensure auditd Collects Information on Kernel Module Loading - init_module
[ref] | To capture kernel module loading events, use following line, setting ARCH to
either b32 for 32-bit system, or having two lines for both b32 and b64 in case your system is 64-bit:
-a always,exit -F arch=ARCH -S init_module -F key=modules
Place to add the line depends on a way auditd daemon is configured. If it is configured
to use the augenrules program (the default), add the line to a file with suffix
.rules in the directory /etc/audit/rules.d.
If the auditd daemon is configured to use the auditctl utility,
add the line to file /etc/audit/audit.rules. | | Rationale: | The addition of kernel modules can be used to alter the behavior of
the kernel and potentially introduce malicious code into kernel space. It is important
to have an audit trail of modules that have been introduced into the kernel. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_kernel_module_loading_init | | Identifiers: | CCE-82582-8 | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6 | | iso27001-2013 | A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2 | | nist | AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4 | | ospp | FAU_GEN.1.1.c | | pcidss | Req-10.2.7 | | os-srg | SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000471-GPOS-00216, SRG-OS-000477-GPOS-00222 | | app-srg-ctr | SRG-APP-000495-CTR-001235, SRG-APP-000504-CTR-001280, CNTR-OS-000930, CNTR-OS-000980 | | anssi | R73 |
| |
|
| Group
Record Attempts to Alter Logon and Logout Events
Group contains 4 rules |
[ref]
The audit system already collects login information for all users
and root. If the auditd daemon is configured to use the
augenrules program to read audit rules during daemon startup (the
default), add the following lines to a file with suffix .rules in the
directory /etc/audit/rules.d in order to watch for attempted manual
edits of files involved in storing logon events:
-w /var/log/tallylog -p wa -k logins
-w /var/run/faillock -p wa -k logins
-w /var/log/lastlog -p wa -k logins
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following lines to
/etc/audit/audit.rules file in order to watch for unattempted manual
edits of files involved in storing logon events:
-w /var/log/tallylog -p wa -k logins
-w /var/run/faillock -p wa -k logins
-w /var/log/lastlog -p wa -k logins
|
Rule
Record Attempts to Alter Logon and Logout Events
[ref] | The audit system already collects login information for all users
and root. If the auditd daemon is configured to use the
augenrules program to read audit rules during daemon startup (the
default), add the following lines to a file with suffix .rules in the
directory /etc/audit/rules.d in order to watch for attempted manual
edits of files involved in storing logon events:
-w /var/log/tallylog -p wa -k logins
-w /var/run/faillock -p wa -k logins
-w /var/log/lastlog -p wa -k logins
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following lines to
/etc/audit/audit.rules file in order to watch for unattempted manual
edits of files involved in storing logon events:
-w /var/log/tallylog -p wa -k logins
-w /var/run/faillock -p wa -k logins
-w /var/log/lastlog -p wa -k logins
Warning:
This rule checks for multiple syscalls related to login events;
it was written with DISA STIG in mind. Other policies should use a
separate rule for each syscall that needs to be checked. For example:
audit_rules_login_events_tallylogaudit_rules_login_events_faillockaudit_rules_login_events_lastlog
| | Rationale: | Manual editing of these files may indicate nefarious activity, such
as an attacker attempting to remove evidence of an intrusion. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_login_events | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9 | | cjis | 5.4.1.1 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-000172, CCI-002884 | | isa-62443-2009 | 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6 | | iso27001-2013 | A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2 | | nist | AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4 | | pcidss | Req-10.2.3 |
| |
|
Rule
Record Attempts to Alter Logon and Logout Events - faillock
[ref] | The audit system already collects login information for all users
and root. If the auditd daemon is configured to use the
augenrules program to read audit rules during daemon startup (the
default), add the following lines to a file with suffix .rules in the
directory /etc/audit/rules.d in order to watch for attempted manual
edits of files involved in storing logon events:
-w /var/run/faillock -p wa -k logins
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following lines to
/etc/audit/audit.rules file in order to watch for unattempted manual
edits of files involved in storing logon events:
-w /var/run/faillock -p wa -k logins
| | Rationale: | Manual editing of these files may indicate nefarious activity, such
as an attacker attempting to remove evidence of an intrusion. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_login_events_faillock | | Identifiers: | CCE-82583-6 | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-000126, CCI-000172, CCI-002884 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6 | | iso27001-2013 | A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2 | | nist | AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4 | | ospp | FAU_GEN.1.1.c | | pcidss | Req-10.2.3 | | os-srg | SRG-OS-000392-GPOS-00172, SRG-OS-000470-GPOS-00214, SRG-OS-000473-GPOS-00218 | | app-srg-ctr | SRG-APP-000503-CTR-001275, SRG-APP-000506-CTR-001290, CNTR-OS-000970, CNTR-OS-001000 | | anssi | R73 | | pcidss4 | 10.2.1.3 |
| |
|
Rule
Record Attempts to Alter Logon and Logout Events - lastlog
[ref] | The audit system already collects login information for all users
and root. If the auditd daemon is configured to use the
augenrules program to read audit rules during daemon startup (the
default), add the following lines to a file with suffix .rules in the
directory /etc/audit/rules.d in order to watch for attempted manual
edits of files involved in storing logon events:
-w /var/log/lastlog -p wa -k logins
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following lines to
/etc/audit/audit.rules file in order to watch for unattempted manual
edits of files involved in storing logon events:
-w /var/log/lastlog -p wa -k logins
| | Rationale: | Manual editing of these files may indicate nefarious activity, such
as an attacker attempting to remove evidence of an intrusion. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_login_events_lastlog | | Identifiers: | CCE-82584-4 | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-000126, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6 | | iso27001-2013 | A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2 | | nist | AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4 | | ospp | FAU_GEN.1.1.c | | pcidss | Req-10.2.3 | | os-srg | SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000473-GPOS-00218, SRG-OS-000470-GPOS-00214 | | app-srg-ctr | SRG-APP-000495-CTR-001235, SRG-APP-000503-CTR-001275, SRG-APP-000506-CTR-001290, CNTR-OS-000930, CNTR-OS-000970, CNTR-OS-001000 | | anssi | R73 | | pcidss4 | 10.2.1.3 |
| |
|
Rule
Record Attempts to Alter Logon and Logout Events - tallylog
[ref] | The audit system already collects login information for all users
and root. If the auditd daemon is configured to use the
augenrules program to read audit rules during daemon startup (the
default), add the following lines to a file with suffix .rules in the
directory /etc/audit/rules.d in order to watch for attempted manual
edits of files involved in storing logon events:
-w /var/log/tallylog -p wa -k logins
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following lines to
/etc/audit/audit.rules file in order to watch for unattempted manual
edits of files involved in storing logon events:
-w /var/log/tallylog -p wa -k logins
| | Rationale: | Manual editing of these files may indicate nefarious activity, such
as an attacker attempting to remove evidence of an intrusion. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_login_events_tallylog | | Identifiers: | CCE-82585-1 | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-000172, CCI-002884, CCI-000126 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6 | | iso27001-2013 | A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2 | | nist | AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4 | | ospp | FAU_GEN.1.1.c | | pcidss | Req-10.2.3 | | os-srg | SRG-OS-000392-GPOS-00172, SRG-OS-000470-GPOS-00214, SRG-OS-000473-GPOS-00218 | | app-srg-ctr | SRG-APP-000503-CTR-001275, CNTR-OS-000970 | | pcidss4 | 10.2.1.3 |
| |
|
| Group
Records Events that Modify Date and Time Information
Group contains 5 rules |
[ref]
Arbitrary changes to the system time can be used to obfuscate
nefarious activities in log files, as well as to confuse network services that
are highly dependent upon an accurate system time. All changes to the system
time should be audited. |
Rule
Record attempts to alter time through adjtimex
[ref] | If the auditd daemon is configured to use the
augenrules program to read audit rules during daemon startup (the
default), add the following line to a file with suffix .rules in the
directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S adjtimex -F key=audit_time_rules
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S adjtimex -F key=audit_time_rules
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following line to
/etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S adjtimex -F key=audit_time_rules
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S adjtimex -F key=audit_time_rules
The -k option allows for the specification of a key in string form that can be
used for better reporting capability through ausearch and aureport. Multiple
system calls can be defined on the same line to save space if desired, but is
not required. See an example of multiple combined syscalls:
-a always,exit -F arch=b64 -S adjtimex,settimeofday -F key=audit_time_rules
| | Rationale: | Arbitrary changes to the system time can be used to obfuscate
nefarious activities in log files, as well as to confuse network services that
are highly dependent upon an accurate system time (such as sshd). All changes
to the system time should be audited. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_time_adjtimex | | Identifiers: | CCE-82614-9 | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9 | | cjis | 5.4.1.1 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-001487, CCI-000169 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6 | | iso27001-2013 | A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2 | | nist | AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4 | | pcidss | Req-10.4.2.b | | anssi | R73 | | pcidss4 | 10.6.3 |
| |
|
Rule
Record Attempts to Alter Time Through clock_settime
[ref] | If the auditd daemon is configured to use the
augenrules program to read audit rules during daemon startup (the
default), add the following line to a file with suffix .rules in the
directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S clock_settime -F a0=0x0 -F key=time-change
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S clock_settime -F a0=0x0 -F key=time-change
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following line to
/etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S clock_settime -F a0=0x0 -F key=time-change
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S clock_settime -F a0=0x0 -F key=time-change
The -k option allows for the specification of a key in string form that can
be used for better reporting capability through ausearch and aureport.
Multiple system calls can be defined on the same line to save space if
desired, but is not required. See an example of multiple combined syscalls:
-a always,exit -F arch=b64 -S adjtimex,settimeofday -F key=audit_time_rules
| | Rationale: | Arbitrary changes to the system time can be used to obfuscate
nefarious activities in log files, as well as to confuse network services that
are highly dependent upon an accurate system time (such as sshd). All changes
to the system time should be audited. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_time_clock_settime | | Identifiers: | CCE-82615-6 | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9 | | cjis | 5.4.1.1 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-001487, CCI-000169 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6 | | iso27001-2013 | A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2 | | nist | AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4 | | pcidss | Req-10.4.2.b | | anssi | R73 | | pcidss4 | 10.6.3 |
| |
|
Rule
Record attempts to alter time through settimeofday
[ref] | If the auditd daemon is configured to use the
augenrules program to read audit rules during daemon startup (the
default), add the following line to a file with suffix .rules in the
directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S settimeofday -F key=audit_time_rules
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S settimeofday -F key=audit_time_rules
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following line to
/etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S settimeofday -F key=audit_time_rules
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S settimeofday -F key=audit_time_rules
The -k option allows for the specification of a key in string form that can be
used for better reporting capability through ausearch and aureport. Multiple
system calls can be defined on the same line to save space if desired, but is
not required. See an example of multiple combined syscalls:
-a always,exit -F arch=b64 -S adjtimex,settimeofday -F key=audit_time_rules
| | Rationale: | Arbitrary changes to the system time can be used to obfuscate
nefarious activities in log files, as well as to confuse network services that
are highly dependent upon an accurate system time (such as sshd). All changes
to the system time should be audited. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_time_settimeofday | | Identifiers: | CCE-82616-4 | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9 | | cjis | 5.4.1.1 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-001487, CCI-000169 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6 | | iso27001-2013 | A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2 | | nist | AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4 | | pcidss | Req-10.4.2.b | | pcidss4 | 10.6.3 |
| |
|
Rule
Record Attempts to Alter Time Through stime
[ref] | If the auditd daemon is configured to use the
augenrules program to read audit rules during daemon startup (the
default), add the following line to a file with suffix .rules in the
directory /etc/audit/rules.d for both 32 bit and 64 bit systems:
-a always,exit -F arch=b32 -S stime -F key=audit_time_rules
Since the 64 bit version of the "stime" system call is not defined in the audit
lookup table, the corresponding "-F arch=b64" form of this rule is not expected
to be defined on 64 bit systems (the aforementioned "-F arch=b32" stime rule
form itself is sufficient for both 32 bit and 64 bit systems). If the
auditd daemon is configured to use the auditctl utility to
read audit rules during daemon startup, add the following line to
/etc/audit/audit.rules file for both 32 bit and 64 bit systems:
-a always,exit -F arch=b32 -S stime -F key=audit_time_rules
Since the 64 bit version of the "stime" system call is not defined in the audit
lookup table, the corresponding "-F arch=b64" form of this rule is not expected
to be defined on 64 bit systems (the aforementioned "-F arch=b32" stime rule
form itself is sufficient for both 32 bit and 64 bit systems). The -k option
allows for the specification of a key in string form that can be used for
better reporting capability through ausearch and aureport. Multiple system
calls can be defined on the same line to save space if desired, but is not
required. See an example of multiple combined system calls:
-a always,exit -F arch=b64 -S adjtimex,settimeofday -F key=audit_time_rules
| | Rationale: | Arbitrary changes to the system time can be used to obfuscate
nefarious activities in log files, as well as to confuse network services that
are highly dependent upon an accurate system time (such as sshd). All changes
to the system time should be audited. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_time_stime | | Identifiers: | CCE-82617-2 | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9 | | cjis | 5.4.1.1 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-001487, CCI-000169 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6 | | iso27001-2013 | A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2 | | nist | AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4 | | pcidss | Req-10.4.2.b | | anssi | R73 | | pcidss4 | 10.6.3 |
| |
|
Rule
Record Attempts to Alter the localtime File
[ref] | If the auditd daemon is configured to use the
augenrules program to read audit rules during daemon startup (the default),
add the following line to a file with suffix .rules in the directory
/etc/audit/rules.d:
-w /etc/localtime -p wa -k audit_time_rules
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following line to
/etc/audit/audit.rules file:
-w /etc/localtime -p wa -k audit_time_rules
The -k option allows for the specification of a key in string form that can
be used for better reporting capability through ausearch and aureport and
should always be used. | | Rationale: | Arbitrary changes to the system time can be used to obfuscate
nefarious activities in log files, as well as to confuse network services that
are highly dependent upon an accurate system time (such as sshd). All changes
to the system time should be audited. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_time_watch_localtime | | Identifiers: | CCE-82618-0 | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9 | | cjis | 5.4.1.1 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-001487, CCI-000169 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6 | | iso27001-2013 | A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2 | | nist | AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4 | | pcidss | Req-10.4.2.b | | anssi | R73 | | pcidss4 | 10.6.3 |
| |
|
Rule
Record Events that Modify the System's Network Environment
[ref] | If the auditd daemon is configured to use the
augenrules program to read audit rules during daemon startup (the
default), add the following lines to a file with suffix .rules in the
directory /etc/audit/rules.d, setting ARCH to either b32 or b64 as
appropriate for your system:
-a always,exit -F arch=ARCH -S sethostname,setdomainname -F key=audit_rules_networkconfig_modification
-w /etc/issue -p wa -k audit_rules_networkconfig_modification
-w /etc/issue.net -p wa -k audit_rules_networkconfig_modification
-w /etc/hosts -p wa -k audit_rules_networkconfig_modification
-w /etc/sysconfig/network -p wa -k audit_rules_networkconfig_modification
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following lines to
/etc/audit/audit.rules file, setting ARCH to either b32 or b64 as
appropriate for your system:
-a always,exit -F arch=ARCH -S sethostname,setdomainname -F key=audit_rules_networkconfig_modification
-w /etc/issue -p wa -k audit_rules_networkconfig_modification
-w /etc/issue.net -p wa -k audit_rules_networkconfig_modification
-w /etc/hosts -p wa -k audit_rules_networkconfig_modification
-w /etc/sysconfig/network -p wa -k audit_rules_networkconfig_modification
| | Rationale: | The network environment should not be modified by anything other
than administrator action. Any change to network parameters should be
audited. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_networkconfig_modification | | Identifiers: | CCE-82588-5 | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9 | | cjis | 5.4.1.1 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6 | | iso27001-2013 | A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2 | | nist | AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4 | | pcidss | Req-10.5.5 | | anssi | R73 | | pcidss4 | 10.3.4 |
| |
|
Rule
Ensure auditd Collects System Administrator Actions
[ref] | At a minimum, the audit system should collect administrator actions
for all users and root. If the auditd daemon is configured to use the
augenrules program to read audit rules during daemon startup (the default),
add the following line to a file with suffix .rules in the directory
/etc/audit/rules.d:
-w /etc/sudoers -p wa -k actions
-w /etc/sudoers.d/ -p wa -k actions
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following line to
/etc/audit/audit.rules file:
-w /etc/sudoers -p wa -k actions
-w /etc/sudoers.d/ -p wa -k actions
| | Rationale: | The actions taken by system administrators should be audited to keep a record
of what was executed on the system, as well as, for accountability purposes. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_sysadmin_actions | | Identifiers: | CCE-82613-1 | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 18, 19, 2, 3, 4, 5, 6, 7, 8, 9 | | cjis | 5.4.1.1 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS06.03, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-000126, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.2.3.10, 4.3.2.6.7, 4.3.3.2.2, 4.3.3.3.9, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.8, 4.3.3.6.6, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 1.1, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6 | | iso27001-2013 | A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5 | | nist | AC-2(7)(b), AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-1, PR.AC-3, PR.AC-4, PR.AC-6, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4 | | ospp | FAU_GEN.1.1.c | | pcidss | Req-10.2.2, Req-10.2.5.b | | os-srg | SRG-OS-000004-GPOS-00004, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000304-GPOS-00121, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000470-GPOS-00214, SRG-OS-000471-GPOS-00215, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000304-GPOS-00121, SRG-OS-000466-GPOS-00210, SRG-OS-000476-GPOS-00221 | | app-srg-ctr | SRG-APP-000026-CTR-000070, SRG-APP-000027-CTR-000075, SRG-APP-000028-CTR-000080, SRG-APP-000291-CTR-000675, SRG-APP-000292-CTR-000680, SRG-APP-000293-CTR-000685, SRG-APP-000294-CTR-000690, SRG-APP-000319-CTR-000745, SRG-APP-000320-CTR-000750, SRG-APP-000509-CTR-001305, CNTR-OS-000050, CNTR-OS-000060, CNTR-OS-000070 | | anssi | R73 | | pcidss4 | 10.2.1.5 |
| |
|
Rule
Record Events that Modify User/Group Information
[ref] | If the auditd daemon is configured to use the
augenrules program to read audit rules during daemon startup (the
default), add the following lines to a file with suffix .rules in the
directory /etc/audit/rules.d, in order to capture events that modify
account changes:
-w /etc/group -p wa -k audit_rules_usergroup_modification
-w /etc/passwd -p wa -k audit_rules_usergroup_modification
-w /etc/gshadow -p wa -k audit_rules_usergroup_modification
-w /etc/shadow -p wa -k audit_rules_usergroup_modification
-w /etc/security/opasswd -p wa -k audit_rules_usergroup_modification
If the auditd daemon is configured to use the auditctl
utility to read audit rules during daemon startup, add the following lines to
/etc/audit/audit.rules file, in order to capture events that modify
account changes:
-w /etc/group -p wa -k audit_rules_usergroup_modification
-w /etc/passwd -p wa -k audit_rules_usergroup_modification
-w /etc/gshadow -p wa -k audit_rules_usergroup_modification
-w /etc/shadow -p wa -k audit_rules_usergroup_modification
-w /etc/security/opasswd -p wa -k audit_rules_usergroup_modification
Warning:
This rule checks for multiple syscalls related to account changes;
it was written with DISA STIG in mind. Other policies should use a
separate rule for each syscall that needs to be checked. For example:
audit_rules_usergroup_modification_groupaudit_rules_usergroup_modification_gshadowaudit_rules_usergroup_modification_passwd
| | Rationale: | In addition to auditing new user and group accounts, these watches
will alert the system administrator(s) to any modifications. Any unexpected
users, groups, or modifications should be investigated for legitimacy. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 18, 19, 2, 3, 4, 5, 6, 7, 8, 9 | | cjis | 5.4.1.1 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS06.03, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.1.7 | | disa | CCI-000018, CCI-000130, CCI-000172, CCI-001403, CCI-002130 | | isa-62443-2009 | 4.2.3.10, 4.3.2.6.7, 4.3.3.2.2, 4.3.3.3.9, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.8, 4.3.3.6.6, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 1.1, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6 | | iso27001-2013 | A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5 | | nerc-cip | CIP-004-6 R2.2.2, CIP-004-6 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3 | | nist | AC-2(4), AU-2(d), AU-12(c), AC-6(9), CM-6(a) | | nist-csf | DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-1, PR.AC-3, PR.AC-4, PR.AC-6, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4 | | pcidss | Req-10.2.5 | | os-srg | SRG-OS-000004-GPOS-00004, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000239-GPOS-00089, SRG-OS-000241-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000476-GPOS-00221 | | app-srg-ctr | SRG-APP-000026-CTR-000070, SRG-APP-000027-CTR-000075, SRG-APP-000028-CTR-000080, SRG-APP-000291-CTR-000675, SRG-APP-000292-CTR-000680, SRG-APP-000293-CTR-000685, SRG-APP-000294-CTR-000690, SRG-APP-000319-CTR-000745, SRG-APP-000320-CTR-000750, SRG-APP-000509-CTR-001305, CNTR-OS-000050, CNTR-OS-000060, CNTR-OS-000070 |
| |
|
| Group
Configure auditd Data Retention
Group contains 6 rules |
[ref]
The audit system writes data to /var/log/audit/audit.log. By default,
auditd rotates 5 logs by size (6MB), retaining a maximum of 30MB of
data in total, and refuses to write entries when the disk is too
full. This minimizes the risk of audit data filling its partition
and impacting other services. This also minimizes the risk of the audit
daemon temporarily disabling the system if it cannot write audit log (which
it can be configured to do).
For a busy
system or a system which is thoroughly auditing system activity, the default settings
for data retention may be
insufficient. The log file size needed will depend heavily on what types
of events are being audited. First configure auditing to log all the events of
interest. Then monitor the log size manually for awhile to determine what file
size will allow you to keep the required data for the correct time period.
Using a dedicated partition for /var/log/audit prevents the
auditd logs from disrupting system functionality if they fill, and,
more importantly, prevents other activity in /var from filling the
partition and stopping the audit trail. (The audit logs are size-limited and
therefore unlikely to grow without bound unless configured to do so.) Some
machines may have requirements that no actions occur which cannot be audited.
If this is the case, then auditd can be configured to halt the machine
if it runs out of space. Note: Since older logs are rotated,
configuring auditd this way does not prevent older logs from being
rotated away before they can be viewed.
If your system is configured to halt when logging cannot be performed, make
sure this can never happen under normal circumstances! Ensure that
/var/log/audit is on its own partition, and that this partition is
larger than the maximum amount of data auditd will retain
normally.
|
Rule
Configure auditd flush priority
[ref] | The auditd service can be configured to
synchronously write audit event data to disk. Add or correct the following
line in /etc/audit/auditd.conf to ensure that audit event data is
fully synchronized with the log files on the disk:
flush = incremental_async
| | Rationale: | Audit data should be synchronously written to disk to ensure
log integrity. These parameters assure that all audit event data is fully
synchronized with the log files on the disk. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_auditd_data_retention_flush | | Identifiers: | CCE-82508-3 | | References: | | cis-csc | 1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.3.1 | | disa | CCI-001576 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e) | | isa-62443-2009 | 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2 | | iso27001-2013 | A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2 | | nerc-cip | CIP-004-6 R2.2.3, CIP-004-6 R3.3, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, CIP-007-3 R6.5 | | nist | AU-11, CM-6(a) | | nist-csf | DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1 | | os-srg | SRG-OS-000480-GPOS-00227 |
| |
|
Rule
Set number of records to cause an explicit flush to audit logs
[ref] | To configure Audit daemon to issue an explicit flush to disk command
after writing 50 records, set freq to 50
in /etc/audit/auditd.conf. | | Rationale: | If option freq isn't set to 50, the flush to disk
may happen after higher number of records, increasing the danger
of audit loss. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_auditd_freq | | Identifiers: | CCE-82512-5 | | References: | | |
|
Rule
Include Local Events in Audit Logs
[ref] | To configure Audit daemon to include local events in Audit logs, set
local_events to yes in /etc/audit/auditd.conf.
This is the default setting. | | Rationale: | If option local_events isn't set to yes only events from
network will be aggregated. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_auditd_local_events | | Identifiers: | CCE-82509-1 | | References: | | disa | CCI-000366 | | nist | CM-6 | | ospp | FAU_GEN.1 | | os-srg | SRG-OS-000062-GPOS-00031, SRG-OS-000480-GPOS-00227 |
| |
|
Rule
Resolve information before writing to audit logs
[ref] | To configure Audit daemon to resolve all uid, gid, syscall,
architecture, and socket address information before writing the
events to disk, set log_format to ENRICHED
in /etc/audit/auditd.conf. | | Rationale: | If option log_format isn't set to ENRICHED, the
audit records will be stored in a format exactly as the kernel sends them. | | Severity: | low | | Rule ID: | xccdf_org.ssgproject.content_rule_auditd_log_format | | Identifiers: | CCE-82511-7 | | References: | | disa | CCI-000366 | | nist | CM-6, AU-3 | | ospp | FAU_GEN.1.2 | | os-srg | SRG-OS-000255-GPOS-00096, SRG-OS-000480-GPOS-00227 | | app-srg-ctr | SRG-APP-000096-CTR-000175, SRG-APP-000097-CTR-000180, SRG-APP-000098-CTR-000185, SRG-APP-000099-CTR-000190, SRG-APP-000100-CTR-000195, SRG-APP-000100-CTR-000200, SRG-APP-000109-CTR-000215, SRG-APP-000290-CTR-000670, SRG-APP-000357-CTR-000800, CNTR-OS-000190, CNTR-OS-000200, CNTR-OS-000210, CNTR-OS-000670 |
| |
|
Rule
Set type of computer node name logging in audit logs
[ref] | To configure Audit daemon to use a unique identifier
as computer node name in the audit events,
set name_format to hostname
in /etc/audit/auditd.conf. Warning:
Whenever the variable var_auditd_name_format uses a multiple value option, for example
A|B|C , the first value will be used when remediating this rule. | | Rationale: | If option name_format is left at its default value of
none, audit events from different computers may be hard
to distinguish. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_auditd_name_format | | Identifiers: | CCE-82513-3 | | References: | | disa | CCI-001851 | | nist | CM-6, AU-3 | | ospp | FAU_GEN.1.2 | | os-srg | SRG-OS-000039-GPOS-00017, SRG-OS-000342-GPOS-00133, SRG-OS-000479-GPOS-00224 | | pcidss4 | 10.2.2 |
| |
|
Rule
Write Audit Logs to the Disk
[ref] | To configure Audit daemon to write Audit logs to the disk, set
write_logs to yes in /etc/audit/auditd.conf.
This is the default setting. | | Rationale: | If write_logs isn't set to yes, the Audit logs will
not be written to the disk. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_auditd_write_logs | | Identifiers: | CCE-82510-9 | | References: | | |
|
Rule
Enable auditd Service
[ref] | The auditd service is an essential userspace component of
the Linux Auditing System, as it is responsible for writing audit records to
disk.
The auditd service can be enabled with the following manifest:
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
metadata:
labels:
machineconfiguration.openshift.io/role: master
name: 75-master-auditd-enable
spec:
config:
ignition:
version: 3.1.0
systemd:
units:
- name: auditd.service
enabled: true
This will enable the auditd service in all the
nodes labeled with the "master" role.
Note that this needs to be done for each MachineConfigPool
For more information on how to configure nodes with the Machine Config
Operator see
the relevant documentation.
| | Rationale: | Without establishing what type of events occurred, it would be difficult
to establish, correlate, and investigate the events leading up to an outage or attack.
Ensuring the auditd service is active ensures audit records
generated by the kernel are appropriately recorded.
Additionally, a properly configured audit subsystem ensures that actions of
individual system users can be uniquely traced to those users so they
can be held accountable for their actions. | | Severity: | medium | | Rule ID: | xccdf_org.ssgproject.content_rule_service_auditd_enabled | | Identifiers: | CCE-82463-1 | | References: | | cis-csc | 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9 | | cjis | 5.4.1.1 | | cobit5 | APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01 | | cui | 3.3.1, 3.3.2, 3.3.6 | | disa | CCI-000126, CCI-000130, CCI-000131, CCI-000132, CCI-000133, CCI-000134, CCI-000135, CCI-000154, CCI-000158, CCI-000172, CCI-000366, CCI-001464, CCI-001487, CCI-001814, CCI-001875, CCI-001876, CCI-001877, CCI-002884, CCI-001878, CCI-001879, CCI-001880, CCI-001881, CCI-001882, CCI-001889, CCI-001914, CCI-000169 | | hipaa | 164.308(a)(1)(ii)(D), 164.308(a)(5)(ii)(C), 164.310(a)(2)(iv), 164.310(d)(2)(iii), 164.312(b) | | isa-62443-2009 | 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4 | | isa-62443-2013 | SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6 | | iso27001-2013 | A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2 | | nerc-cip | CIP-004-6 R3.3, CIP-007-3 R6.5 | | nist | AC-2(g), AU-3, AU-10, AU-2(d), AU-12(c), AU-14(1), AC-6(9), CM-6(a), SI-4(23) | | nist-csf | DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4 | | ospp | FAU_GEN.1 | | pcidss | Req-10.1 | | os-srg | SRG-OS-000062-GPOS-00031, SRG-OS-000037-GPOS-00015, SRG-OS-000038-GPOS-00016, SRG-OS-000039-GPOS-00017, SRG-OS-000040-GPOS-00018, SRG-OS-000041-GPOS-00019, SRG-OS-000042-GPOS-00021, SRG-OS-000051-GPOS-00024, SRG-OS-000054-GPOS-00025, SRG-OS-000122-GPOS-00063, SRG-OS-000254-GPOS-00095, SRG-OS-000255-GPOS-00096, SRG-OS-000337-GPOS-00129, SRG-OS-000348-GPOS-00136, SRG-OS-000349-GPOS-00137, SRG-OS-000350-GPOS-00138, SRG-OS-000351-GPOS-00139, SRG-OS-000352-GPOS-00140, SRG-OS-000353-GPOS-00141, SRG-OS-000354-GPOS-00142, SRG-OS-000358-GPOS-00145, SRG-OS-000365-GPOS-00152, SRG-OS-000392-GPOS-00172, SRG-OS-000475-GPOS-00220 | | app-srg-ctr | SRG-APP-000095-CTR-000170, SRG-APP-000409-CTR-000990, SRG-APP-000508-CTR-001300, SRG-APP-000510-CTR-001310, CNTR-OS-000150, CNTR-OS-000180 | | anssi | R33, R73 | | pcidss4 | 10.2.1 |
| |
|