Guide to the Secure Configuration of Red Hat Enterprise Linux 10

with profile Australian Cyber Security Centre (ACSC) ISM Official - Secret
This profile contains configuration checks for Red Hat Enterprise Linux 10 that align to the Australian Cyber Security Centre (ACSC) Information Security Manual (ISM). The ISM uses a risk-based approach to cyber security. This profile provides a guide to aligning Red Hat Enterprise Linux security controls with the ISM, which can be used to select controls specific to an organisation's security posture and risk profile. A copy of the ISM can be found at the ACSC website: https://www.cyber.gov.au/ism
This guide presents a catalog of security-relevant configuration settings for Red Hat Enterprise Linux 10. It is a rendering of content structured in the eXtensible Configuration Checklist Description Format (XCCDF) in order to support security automation. The SCAP content is is available in the scap-security-guide package which is developed at https://www.open-scap.org/security-policies/scap-security-guide.

Providing system administrators with such guidance informs them how to securely configure systems under their control in a variety of network roles. Policy makers and baseline creators can use this catalog of settings, with its associated references to higher-level security control catalogs, in order to assist them in security baseline creation. This guide is a catalog, not a checklist, and satisfaction of every item is not likely to be possible or sensible in many operational scenarios. However, the XCCDF format enables granular selection and adjustment of settings, and their association with OVAL and OCIL content provides an automated checking capability. Transformations of this document, and its associated automated checking content, are capable of providing baselines that meet a diverse set of policy objectives. Some example XCCDF Profiles, which are selections of items that form checklists and can be used as baselines, are available with this guide. They can be processed, in an automated fashion, with tools that support the Security Content Automation Protocol (SCAP). The DISA STIG, which provides required settings for US Department of Defense systems, is one example of a baseline created from this guidance.
Do not attempt to implement any of the settings in this guide without first testing them in a non-operational environment. The creators of this guidance assume no responsibility whatsoever for its use by other parties, and makes no guarantees, expressed or implied, about its quality, reliability, or any other characteristic.

Profile Information

Profile TitleAustralian Cyber Security Centre (ACSC) ISM Official - Secret
Profile IDxccdf_org.ssgproject.content_profile_ism_o_secret

CPE Platforms

  • cpe:/o:redhat:enterprise_linux:10

Revision History

Current version: 0.1.74

  • draft (as of 2024-06-20)

Table of Contents

  1. System Settings
    1. Installing and Maintaining Software
    2. Account and Access Control
    3. Configure Syslog
    4. Network Configuration and Firewalls
    5. File Permissions and Masks
    6. SELinux
  2. Services
    1. Avahi Server
    2. Application Whitelisting Daemon
    3. Kerberos
    4. LDAP
    5. Network Time Protocol
    6. Obsolete Services
    7. Proxy Server
    8. Network Routing
    9. SNMP Server
    10. SSH Server
    11. System Security Services Daemon
    12. USBGuard daemon
  3. System Accounting with auditd
    1. Configure auditd Rules for Comprehensive Auditing
    2. Configure auditd Data Retention
    3. System Accounting with auditd

Checklist

Group   Guide to the Secure Configuration of Red Hat Enterprise Linux 10   Group contains 76 groups and 172 rules
Group   System Settings   Group contains 43 groups and 98 rules
[ref]   Contains rules that check correct system settings.
Group   Installing and Maintaining Software   Group contains 9 groups and 23 rules
[ref]   The following sections contain information on security-relevant choices during the initial operating system installation process and the setup of software updates.
Group   System and Software Integrity   Group contains 5 groups and 9 rules
[ref]   System and software integrity can be gained by installing antivirus, increasing system encryption strength with FIPS, verifying installed software, enabling SELinux, installing an Intrusion Prevention System, etc. However, installing or enabling integrity checking tools cannot prevent intrusions, but they can detect that an intrusion may have occurred. Requirements for integrity checking may be highly dependent on the environment in which the system will be used. Snapshot-based approaches such as AIDE may induce considerable overhead in the presence of frequent software updates.
Group   Software Integrity Checking   Group contains 2 groups and 3 rules
[ref]   Both the AIDE (Advanced Intrusion Detection Environment) software and the RPM package management system provide mechanisms for verifying the integrity of installed software. AIDE uses snapshots of file metadata (such as hashes) and compares these to current system files in order to detect changes.

The RPM package management system can conduct integrity checks by comparing information in its metadata database with files installed on the system.
Group   Verify Integrity with RPM   Group contains 2 rules
[ref]   The RPM package management system includes the ability to verify the integrity of installed packages by comparing the installed files with information about the files taken from the package metadata stored in the RPM database. Although an attacker could corrupt the RPM database (analogous to attacking the AIDE database as described above), this check can still reveal modification of important files. To list which files on the system differ from what is expected by the RPM database:
$ rpm -qVa
See the man page for rpm to see a complete explanation of each column.

Rule   Verify File Hashes with RPM   [ref]

Without cryptographic integrity protections, system executables and files can be altered by unauthorized users without detection. The RPM package management system can check the hashes of installed software packages, including many that are important to system security. To verify that the cryptographic hash of system files and commands matches vendor values, run the following command to list which files on the system have hashes that differ from what is expected by the RPM database:
$ rpm -Va --noconfig | grep '^..5'
If the file was not expected to change, investigate the cause of the change using audit logs or other means. The package can then be reinstalled to restore the file. Run the following command to determine which package owns the file:
$ rpm -qf FILENAME
          
The package can be reinstalled from a dnf repository using the command:
$ sudo dnf reinstall PACKAGENAME
          
Alternatively, the package can be reinstalled from trusted media using the command:
$ sudo rpm -Uvh PACKAGENAME
          
Warning:  This rule can take a long time to perform the check and might consume a considerable amount of resources depending on the number of packages present on the system. It is not a problem in most cases, but especially systems with a large number of installed packages can be affected. See https://access.redhat.com/articles/6999111.
Rationale:
The hashes of important files like system executables should match the information given by the RPM database. Executables with erroneous hashes could be a sign of nefarious activity on the system.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_rpm_verify_hashes
References:
cis-csc11, 2, 3, 9
cjis5.10.4.1
cobit5APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02
cui3.3.8, 3.4.1
disaCCI-000366, CCI-001749
hipaa164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i)
isa-62443-20094.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6
iso27001-2013A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4
nistCM-6(d), CM-6(c), SI-7, SI-7(1), SI-7(6), AU-9(3)
nist-csfPR.DS-6, PR.DS-8, PR.IP-1
pcidssReq-11.5
os-srgSRG-OS-000480-GPOS-00227
pcidss411.5.2

Complexity:high
Disruption:medium
Reboot:false
Strategy:restrict
- name: 'Set fact: Package manager reinstall command'
  set_fact:
    package_manager_reinstall_cmd: dnf reinstall -y
  when: ansible_distribution in [ "Fedora", "RedHat", "CentOS", "OracleLinux" ]
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.3.8
  - NIST-800-171-3.4.1
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(c)
  - NIST-800-53-CM-6(d)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - NIST-800-53-SI-7(6)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - high_complexity
  - high_severity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy
  - rpm_verify_hashes

- name: 'Set fact: Package manager reinstall command (zypper)'
  set_fact:
    package_manager_reinstall_cmd: zypper in -f -y
  when: ansible_distribution == "SLES"
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.3.8
  - NIST-800-171-3.4.1
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(c)
  - NIST-800-53-CM-6(d)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - NIST-800-53-SI-7(6)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - high_complexity
  - high_severity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy
  - rpm_verify_hashes

- name: Read files with incorrect hash
  command: rpm -Va --nodeps --nosize --nomtime --nordev --nocaps --nolinkto --nouser
    --nogroup --nomode --noghost --noconfig
  register: files_with_incorrect_hash
  changed_when: false
  failed_when: files_with_incorrect_hash.rc > 1
  check_mode: false
  when: (package_manager_reinstall_cmd is defined)
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.3.8
  - NIST-800-171-3.4.1
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(c)
  - NIST-800-53-CM-6(d)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - NIST-800-53-SI-7(6)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - high_complexity
  - high_severity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy
  - rpm_verify_hashes

- name: Create list of packages
  command: rpm -qf "{{ item }}"
  with_items: '{{ files_with_incorrect_hash.stdout_lines | map(''regex_findall'',
    ''^[.]+[5]+.* (\/.*)'', ''\1'') | map(''join'') | select(''match'', ''(\/.*)'')
    | list | unique }}'
  register: list_of_packages
  changed_when: false
  check_mode: false
  when:
  - files_with_incorrect_hash.stdout_lines is defined
  - (files_with_incorrect_hash.stdout_lines | length > 0)
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.3.8
  - NIST-800-171-3.4.1
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(c)
  - NIST-800-53-CM-6(d)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - NIST-800-53-SI-7(6)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - high_complexity
  - high_severity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy
  - rpm_verify_hashes

- name: Reinstall packages of files with incorrect hash
  command: '{{ package_manager_reinstall_cmd }} ''{{ item }}'''
  with_items: '{{ list_of_packages.results | map(attribute=''stdout_lines'') | list
    | unique }}'
  when:
  - files_with_incorrect_hash.stdout_lines is defined
  - (package_manager_reinstall_cmd is defined and (files_with_incorrect_hash.stdout_lines
    | length > 0))
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.3.8
  - NIST-800-171-3.4.1
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(c)
  - NIST-800-53-CM-6(d)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - NIST-800-53-SI-7(6)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - high_complexity
  - high_severity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy
  - rpm_verify_hashes


# Find which files have incorrect hash (not in /etc, because of the system related config files) and then get files names
files_with_incorrect_hash="$(rpm -Va --noconfig | grep -E '^..5' | awk '{print $NF}' )"

if [ -n "$files_with_incorrect_hash" ]; then
    # From files names get package names and change newline to space, because rpm writes each package to new line
    packages_to_reinstall="$(rpm -qf $files_with_incorrect_hash | tr '\n' ' ')"

    
    dnf reinstall -y $packages_to_reinstall
    
fi

Rule   Verify and Correct Ownership with RPM   [ref]

The RPM package management system can check file ownership permissions of installed software packages, including many that are important to system security. After locating a file with incorrect permissions, which can be found with:
rpm -Va | awk '{ if (substr($0,6,1)=="U" || substr($0,7,1)=="G") print $NF }'
run the following command to determine which package owns it:
$ rpm -qf FILENAME
          
Next, run the following command to reset its permissions to the correct values:
$ sudo rpm --setugids PACKAGENAME
          
Warning:  Profiles may require that specific files be owned by root while the default owner defined by the vendor is different. Such files will be reported as a finding and need to be evaluated according to your policy and deployment environment.
Warning:  This rule can take a long time to perform the check and might consume a considerable amount of resources depending on the number of packages present on the system. It is not a problem in most cases, but especially systems with a large number of installed packages can be affected. See https://access.redhat.com/articles/6999111.
Rationale:
Ownership of binaries and configuration files that is incorrect could allow an unauthorized user to gain privileges that they should not have. The ownership set by the vendor should be maintained. Any deviations from this baseline should be investigated.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_rpm_verify_ownership
References:
cis-csc1, 11, 12, 13, 14, 15, 16, 18, 3, 5, 6, 9
cjis5.10.4.1
cobit5APO01.06, APO11.04, BAI03.05, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.04, DSS05.07, DSS06.02, MEA02.01
cui3.3.8, 3.4.1
disaCCI-001494, CCI-001496
isa-62443-20094.3.3.3.9, 4.3.3.5.8, 4.3.3.7.3, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4
isa-62443-2013SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 5.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.5.1, A.12.6.2, A.12.7.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R4.2, CIP-003-8 R6, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2
nistCM-6(d), CM-6(c), SI-7, SI-7(1), SI-7(6), AU-9(3)
nist-csfPR.AC-4, PR.DS-5, PR.IP-1, PR.PT-1
pcidssReq-11.5
os-srgSRG-OS-000256-GPOS-00097, SRG-OS-000257-GPOS-00098, SRG-OS-000278-GPOS-00108
pcidss411.5.2

Complexity:high
Disruption:medium
Reboot:false
Strategy:restrict
- name: Read list of files with incorrect ownership
  command: rpm -Va --nodeps --nosignature --nofiledigest --nosize --nomtime --nordev
    --nocaps --nolinkto --nomode
  register: files_with_incorrect_ownership
  failed_when: files_with_incorrect_ownership.rc > 1
  changed_when: false
  check_mode: false
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.3.8
  - NIST-800-171-3.4.1
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(c)
  - NIST-800-53-CM-6(d)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - NIST-800-53-SI-7(6)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - high_complexity
  - high_severity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy
  - rpm_verify_ownership

- name: Create list of packages
  command: rpm -qf "{{ item }}"
  with_items: '{{ files_with_incorrect_ownership.stdout_lines | map(''regex_findall'',
    ''^[.]+[U|G]+.* (\/.*)'', ''\1'') | map(''join'') | select(''match'', ''(\/.*)'')
    | list | unique }}'
  register: list_of_packages
  changed_when: false
  check_mode: false
  when: (files_with_incorrect_ownership.stdout_lines | length > 0)
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.3.8
  - NIST-800-171-3.4.1
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(c)
  - NIST-800-53-CM-6(d)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - NIST-800-53-SI-7(6)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - high_complexity
  - high_severity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy
  - rpm_verify_ownership

- name: Correct file ownership with RPM
  command: rpm --setugids '{{ item }}'
  with_items: '{{ list_of_packages.results | map(attribute=''stdout_lines'') | list
    | unique }}'
  when: (files_with_incorrect_ownership.stdout_lines | length > 0)
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.3.8
  - NIST-800-171-3.4.1
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(c)
  - NIST-800-53-CM-6(d)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - NIST-800-53-SI-7(6)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - high_complexity
  - high_severity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy
  - rpm_verify_ownership

Complexity:high
Disruption:medium
Reboot:false
Strategy:restrict

# Declare array to hold set of RPM packages we need to correct permissions for
declare -A SETPERMS_RPM_DICT

# Create a list of files on the system having permissions different from what
# is expected by the RPM database
readarray -t FILES_WITH_INCORRECT_PERMS < <(rpm -Va --nofiledigest | awk '{ if (substr($0,6,1)=="U" || substr($0,7,1)=="G") print $NF }')

for FILE_PATH in "${FILES_WITH_INCORRECT_PERMS[@]}"
do
        RPM_PACKAGE=$(rpm -qf "$FILE_PATH")
	# Use an associative array to store packages as it's keys, not having to care about duplicates.
	SETPERMS_RPM_DICT["$RPM_PACKAGE"]=1
done

# For each of the RPM packages left in the list -- reset its permissions to the
# correct values
for RPM_PACKAGE in "${!SETPERMS_RPM_DICT[@]}"
do
        rpm --setugids "${RPM_PACKAGE}"
done
Group   Verify Integrity with AIDE   Group contains 1 rule
[ref]   AIDE conducts integrity checks by comparing information about files with previously-gathered information. Ideally, the AIDE database is created immediately after initial system configuration, and then again after any software update. AIDE is highly configurable, with further configuration information located in /usr/share/doc/aide-VERSION .

Rule   Install AIDE   [ref]

The aide package can be installed with the following command:
$ sudo dnf install aide
Rationale:
The AIDE package must be installed if it is to be available for integrity checking.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_aide_installed
References:
cis-csc1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9
cjis5.10.1.3
cobit5APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06
disaCCI-002696, CCI-002699, CCI-001744
isa-62443-20094.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6
ism1034, 1288, 1341, 1417
iso27001-2013A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3
nistCM-6(a)
nist-csfDE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3
pcidssReq-11.5
os-srgSRG-OS-000445-GPOS-00199
anssiR76, R79
cis6.1.1
pcidss411.5.2


[[packages]]
name = "aide"
version = "*"

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Ensure aide is installed
  package:
    name: aide
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_aide_installed

Complexity:low
Disruption:low
Reboot:false
Strategy:enable

package --add=aide

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include install_aide

class install_aide {
  package { 'aide':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "aide" ; then
    dnf install -y "aide"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Federal Information Processing Standard (FIPS)   Group contains 2 rules
[ref]   The Federal Information Processing Standard (FIPS) is a computer security standard which is developed by the U.S. Government and industry working groups to validate the quality of cryptographic modules. The FIPS standard provides four security levels to ensure adequate coverage of different industries, implementation of cryptographic modules, and organizational sizes and requirements.

FIPS 140-2 is the current standard for validating that mechanisms used to access cryptographic modules utilize authentication that meets industry and government requirements. For government systems, this allows Security Levels 1, 2, 3, or 4 for use on Red Hat Enterprise Linux 10.

See http://csrc.nist.gov/publications/PubsFIPS.html for more information.

Rule   Enable Dracut FIPS Module   [ref]

To enable FIPS mode, run the following command:
fips-mode-setup --enable
To enable FIPS, the system requires that the fips module is added in dracut configuration. Check if /etc/dracut.conf.d/40-fips.conf contain add_dracutmodules+=" fips "
Warning:  The system needs to be rebooted for these changes to take effect.
Warning:  System Crypto Modules must be provided by a vendor that undergoes FIPS-140 certifications. FIPS-140 is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf To meet this, the system has to have cryptographic software provided by a vendor that has undergone this certification. This means providing documentation, test results, design information, and independent third party review by an accredited lab. While open source software is capable of meeting this, it does not meet FIPS-140 unless the vendor submits to this process.
Rationale:
Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data. The operating system must implement cryptographic modules adhering to the higher standards approved by the federal government since this provides assurance they have been tested and validated.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_enable_dracut_fips_module
References:
disaCCI-000068, CCI-000803, CCI-002450
ism1446
nerc-cipCIP-003-8 R4.2, CIP-007-3 R5.1
nistSC-12(2), SC-12(3), IA-7, SC-13, CM-6(a), SC-12
osppFCS_RBG_EXT.1
os-srgSRG-OS-000478-GPOS-00223

Complexity:medium
Disruption:medium
Reboot:true
Strategy:restrict
- name: Check to see the current status of FIPS mode
  command: /usr/bin/fips-mode-setup --check
  register: is_fips_enabled
  changed_when: false
  failed_when: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and not ( lookup("env", "container") == "bwrap-osbuild" ) )
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - enable_dracut_fips_module
  - high_severity
  - medium_complexity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Enable FIPS mode
  command: /usr/bin/fips-mode-setup --enable
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and not ( lookup("env", "container") == "bwrap-osbuild" ) )
  - is_fips_enabled.stdout.find('FIPS mode is enabled.') == -1
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - enable_dracut_fips_module
  - high_severity
  - medium_complexity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Enable Dracut FIPS Module
  lineinfile:
    path: /etc/dracut.conf.d/40-fips.conf
    line: add_dracutmodules+=" fips "
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and not ( lookup("env", "container") == "bwrap-osbuild" ) )
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - enable_dracut_fips_module
  - high_severity
  - medium_complexity
  - medium_disruption
  - reboot_required
  - restrict_strategy

# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && ! ( [ "${container:-}" == "bwrap-osbuild" ] ) ); then

fips-mode-setup --enable
FIPS_CONF="/etc/dracut.conf.d/40-fips.conf"
if ! grep "^add_dracutmodules+=\" fips \"" $FIPS_CONF; then
    echo "add_dracutmodules+=\" fips \"" >> $FIPS_CONF
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable FIPS Mode   [ref]

To enable FIPS mode, run the following command:
fips-mode-setup --enable

The fips-mode-setup command will configure the system in FIPS mode by automatically configuring the following:
  • Setting the kernel FIPS mode flag (/proc/sys/crypto/fips_enabled) to 1
  • Creating /etc/system-fips
  • Setting the system crypto policy in /etc/crypto-policies/config to FIPS
  • Loading the Dracut fips module
Warning:  The system needs to be rebooted for these changes to take effect.
Warning:  This rule DOES NOT CHECK if the components of the operating system are FIPS certified. You can find the list of FIPS certified modules at https://csrc.nist.gov/projects/cryptographic-module-validation-program/validated-modules/search. This rule checks if the system is running in FIPS mode. See the rule description for more information about what it means.
Rationale:
Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data. The operating system must implement cryptographic modules adhering to the higher standards approved by the federal government since this provides assurance they have been tested and validated.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_enable_fips_mode
References:
disaCCI-000068, CCI-000803, CCI-002450
ism1446
nerc-cipCIP-003-8 R4.2, CIP-007-3 R5.1
nistCM-3(6), SC-12(2), SC-12(3), IA-7, SC-13, CM-6(a), SC-12
osppFCS_COP.1(1), FCS_COP.1(2), FCS_COP.1(3), FCS_COP.1(4), FCS_CKM.1, FCS_CKM.2, FCS_TLSC_EXT.1, FCS_RBG_EXT.1
os-srgSRG-OS-000478-GPOS-00223, SRG-OS-000396-GPOS-00176


[customizations]
fips = true

Complexity:medium
Disruption:medium
Reboot:true
Strategy:restrict
- name: XCCDF Value var_system_crypto_policy # promote to variable
  set_fact:
    var_system_crypto_policy: !!str FIPS
  tags:
    - always

- name: Enable FIPS Mode - Check to See the Current Status of FIPS Mode
  ansible.builtin.command: /usr/bin/fips-mode-setup --check
  register: is_fips_enabled
  failed_when: false
  changed_when: false
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and not ( lookup("env", "container") == "bwrap-osbuild" ) )
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-3(6)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - enable_fips_mode
  - high_severity
  - medium_complexity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Enable FIPS Mode - Enable FIPS Mode
  ansible.builtin.command: /usr/bin/fips-mode-setup --enable
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and not ( lookup("env", "container") == "bwrap-osbuild" ) )
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - is_fips_enabled.stdout.find('FIPS mode is enabled.') == -1
  tags:
  - NIST-800-53-CM-3(6)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - enable_fips_mode
  - high_severity
  - medium_complexity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Enable FIPS Mode - Configure Crypto Policy
  ansible.builtin.lineinfile:
    path: /etc/crypto-policies/config
    regexp: ^(?!#)(\S+)$
    line: '{{ var_system_crypto_policy }}'
    create: true
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and not ( lookup("env", "container") == "bwrap-osbuild" ) )
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-3(6)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - enable_fips_mode
  - high_severity
  - medium_complexity
  - medium_disruption
  - reboot_required
  - restrict_strategy

- name: Enable FIPS Mode - Verify that Crypto Policy is Set (runtime)
  ansible.builtin.command: /usr/bin/update-crypto-policies --set {{ var_system_crypto_policy
    }}
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and not ( lookup("env", "container") == "bwrap-osbuild" ) )
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-3(6)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-7
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - enable_fips_mode
  - high_severity
  - medium_complexity
  - medium_disruption
  - reboot_required
  - restrict_strategy

# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && ! ( [ "${container:-}" == "bwrap-osbuild" ] ) ) && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

var_system_crypto_policy='FIPS'


fips-mode-setup --enable

stderr_of_call=$(update-crypto-policies --set ${var_system_crypto_policy} 2>&1 > /dev/null)
rc=$?

if test "$rc" = 127; then
	echo "$stderr_of_call" >&2
	echo "Make sure that the script is installed on the remediated system." >&2
	echo "See output of the 'dnf provides update-crypto-policies' command" >&2
	echo "to see what package to (re)install" >&2

	false  # end with an error code
elif test "$rc" != 0; then
	echo "Error invoking the update-crypto-policies script: $stderr_of_call" >&2
	false  # end with an error code
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   System Cryptographic Policies   Group contains 4 rules
[ref]   Linux has the capability to centrally configure cryptographic polices. The command update-crypto-policies is used to set the policy applicable for the various cryptographic back-ends, such as SSL/TLS libraries. The configured cryptographic policies will be the default policy used by these backends unless the application user configures them otherwise. When the system has been configured to use the centralized cryptographic policies, the administrator is assured that any application that utilizes the supported backends will follow a policy that adheres to the configured profile. Currently the supported backends are:
  • GnuTLS library
  • OpenSSL library
  • NSS library
  • OpenJDK
  • Libkrb5
  • BIND
  • OpenSSH
Applications and languages which rely on any of these backends will follow the system policies as well. Examples are apache httpd, nginx, php, and others.

Rule   Configure System Cryptography Policy   [ref]

To configure the system cryptography policy to use ciphers only from the FIPS policy, run the following command:
$ sudo update-crypto-policies --set FIPS
         
The rule checks if settings for selected crypto policy are configured as expected. Configuration files in the /etc/crypto-policies/back-ends are either symlinks to correct files provided by Crypto-policies package or they are regular files in case crypto policy customizations are applied. Crypto policies may be customized by crypto policy modules, in which case it is delimited from the base policy using a colon.
Warning:  The system needs to be rebooted for these changes to take effect.
Warning:  System Crypto Modules must be provided by a vendor that undergoes FIPS-140 certifications. FIPS-140 is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf To meet this, the system has to have cryptographic software provided by a vendor that has undergone this certification. This means providing documentation, test results, design information, and independent third party review by an accredited lab. While open source software is capable of meeting this, it does not meet FIPS-140 unless the vendor submits to this process.
Rationale:
Centralized cryptographic policies simplify applying secure ciphers across an operating system and the applications that run on that operating system. Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_configure_crypto_policy
References:
hipaa164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.312(e)(1), 164.312(e)(2)(ii)
ism1446
nerc-cipCIP-003-8 R4.2, CIP-007-3 R5.1, CIP-007-3 R7.1
nistAC-17(a), AC-17(2), CM-6(a), MA-4(6), SC-13, SC-12(2), SC-12(3)
osppFCS_COP.1(1), FCS_COP.1(2), FCS_COP.1(3), FCS_COP.1(4), FCS_CKM.1, FCS_CKM.2, FCS_TLSC_EXT.1
os-srgSRG-OS-000396-GPOS-00176, SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174
cis1.6.1
pcidss42.2.7

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value var_system_crypto_policy # promote to variable
  set_fact:
    var_system_crypto_policy: !!str FIPS
  tags:
    - always

- name: Configure System Cryptography Policy
  lineinfile:
    path: /etc/crypto-policies/config
    regexp: ^(?!#)(\S+)$
    line: '{{ var_system_crypto_policy }}'
    create: true
  tags:
  - NIST-800-53-AC-17(2)
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-MA-4(6)
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - PCI-DSSv4-2.2.7
  - configure_crypto_policy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - restrict_strategy

- name: Verify that Crypto Policy is Set (runtime)
  command: /usr/bin/update-crypto-policies --set {{ var_system_crypto_policy }}
  tags:
  - NIST-800-53-AC-17(2)
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-MA-4(6)
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - PCI-DSSv4-2.2.7
  - configure_crypto_policy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    systemd:
      units:
        - name: configure-crypto-policy.service
          enabled: true
          contents: |
            [Unit]
            Before=kubelet.service
            [Service]
            Type=oneshot
            ExecStart=update-crypto-policies --set {{.var_system_crypto_policy}}
            RemainAfterExit=yes
            [Install]
            WantedBy=multi-user.target


var_system_crypto_policy='FIPS'


stderr_of_call=$(update-crypto-policies --set ${var_system_crypto_policy} 2>&1 > /dev/null)
rc=$?

if test "$rc" = 127; then
	echo "$stderr_of_call" >&2
	echo "Make sure that the script is installed on the remediated system." >&2
	echo "See output of the 'dnf provides update-crypto-policies' command" >&2
	echo "to see what package to (re)install" >&2

	false  # end with an error code
elif test "$rc" != 0; then
	echo "Error invoking the update-crypto-policies script: $stderr_of_call" >&2
	false  # end with an error code
fi

Rule   Configure Kerberos to use System Crypto Policy   [ref]

Crypto Policies provide a centralized control over crypto algorithms usage of many packages. Kerberos is supported by crypto policy, but it's configuration may be set up to ignore it. To check that Crypto Policies settings for Kerberos are configured correctly, examine that there is a symlink at /etc/krb5.conf.d/crypto-policies targeting /etc/cypto-policies/back-ends/krb5.config. If the symlink exists, Kerberos is configured to use the system-wide crypto policy settings.
Rationale:
Overriding the system crypto policy makes the behavior of Kerberos violate expectations, and makes system configuration more fragmented.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_configure_kerberos_crypto_policy
References:
ism0418, 1055, 1402
nerc-cipCIP-003-8 R4.2, CIP-007-3 R5.1
nistSC-13, SC-12(2), SC-12(3)
os-srgSRG-OS-000120-GPOS-00061

Complexity:low
Disruption:low
Reboot:true
Strategy:configure
- name: Configure Kerberos to use System Crypto Policy
  file:
    src: /etc/crypto-policies/back-ends/krb5.config
    path: /etc/krb5.conf.d/crypto-policies
    state: link
  tags:
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - configure_kerberos_crypto_policy
  - configure_strategy
  - high_severity
  - low_complexity
  - low_disruption
  - reboot_required

Complexity:low
Disruption:low
Reboot:true
Strategy:configure

rm -f /etc/krb5.conf.d/crypto-policies
ln -s /etc/crypto-policies/back-ends/krb5.config /etc/krb5.conf.d/crypto-policies

Rule   Configure SSH to use System Crypto Policy   [ref]

Crypto Policies provide a centralized control over crypto algorithms usage of many packages. SSH is supported by crypto policy, but the SSH configuration may be set up to ignore it. To check that Crypto Policies settings are configured correctly, ensure that the CRYPTO_POLICY variable is either commented or not set at all in the /etc/sysconfig/sshd.
Rationale:
Overriding the system crypto policy makes the behavior of the SSH service violate expectations, and makes system configuration more fragmented.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_configure_ssh_crypto_policy
References:
disaCCI-001453
hipaa164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.312(e)(1), 164.312(e)(2)(ii)
nerc-cipCIP-003-8 R4.2, CIP-007-3 R5.1, CIP-007-3 R7.1
nistAC-17(a), AC-17(2), CM-6(a), MA-4(6), SC-13
osppFCS_SSH_EXT.1, FCS_SSHS_EXT.1, FCS_SSHC_EXT.1
pcidssReq-2.2
os-srgSRG-OS-000250-GPOS-00093
cis1.6.2
pcidss42.2.7

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Configure SSH to use System Crypto Policy
  lineinfile:
    dest: /etc/sysconfig/sshd
    state: absent
    regexp: (?i)^\s*CRYPTO_POLICY.*$
  tags:
  - NIST-800-53-AC-17(2)
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-MA-4(6)
  - NIST-800-53-SC-13
  - PCI-DSS-Req-2.2
  - PCI-DSSv4-2.2.7
  - configure_ssh_crypto_policy
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required


SSH_CONF="/etc/sysconfig/sshd"

sed -i "/^\s*CRYPTO_POLICY.*$/Id" $SSH_CONF

Rule   OpenSSL uses strong entropy source   [ref]

By default, OpenSSL doesn't always use a SP800-90A compliant random number generator. A way to configure OpenSSL to always use a strong source is to setup a wrapper that defines a shell function that shadows the actual openssl binary, and that ensures that the -rand /dev/random option is added to every openssl invocation. To do so, place the following shell snippet exactly as-is to /etc/profile.d/openssl-rand.sh:
# provide a default -rand /dev/random option to openssl commands that
# support it

# written inefficiently for maximum shell compatibility
openssl()
(
  openssl_bin=/usr/bin/openssl

  case "$*" in
    # if user specified -rand, honor it
    *\ -rand\ *|*\ -help*) exec $openssl_bin "$@" ;;
  esac

  cmds=`$openssl_bin list -digest-commands -cipher-commands | tr '\n' ' '`
  for i in `$openssl_bin list -commands`; do
    if $openssl_bin list -options "$i" | grep -q '^rand '; then
      cmds=" $i $cmds"
    fi
  done

  case "$cmds" in
    *\ "$1"\ *)
      cmd="$1"; shift
      exec $openssl_bin "$cmd" -rand /dev/random "$@" ;;
  esac

  exec $openssl_bin "$@"
)
Warning:  This setting can cause problems on computers without the hardware random generator, because insufficient entropy blocks the program until enough entropy is available.
Rationale:
This rule ensures that openssl invocations always uses SP800-90A compliant random number generator as a default behavior.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_openssl_use_strong_entropy
References:
ism1277, 1552
osppFCS_RBG_EXT.1.2
os-srgSRG-OS-000480-GPOS-00227

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Put a file with shell wrapper to configure OpenSSL to always use strong entropy
  copy:
    dest: /etc/profile.d/openssl-rand.sh
    content: |
      # provide a default -rand /dev/random option to openssl commands that
      # support it

      # written inefficiently for maximum shell compatibility
      openssl()
      (
        openssl_bin=/usr/bin/openssl

        case "$*" in
          # if user specified -rand, honor it
          *\ -rand\ *|*\ -help*) exec $openssl_bin "$@" ;;
        esac

        cmds=`$openssl_bin list -digest-commands -cipher-commands | tr '\n' ' '`
        for i in `$openssl_bin list -commands`; do
          if $openssl_bin list -options "$i" | grep -q '^rand '; then
            cmds=" $i $cmds"
          fi
        done

        case "$cmds" in
          *\ "$1"\ *)
            cmd="$1"; shift
            exec $openssl_bin "$cmd" -rand /dev/random "$@" ;;
        esac

        exec $openssl_bin "$@"
      )
  tags:
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - openssl_use_strong_entropy
  - restrict_strategy
Group   Sudo   Group contains 4 rules
[ref]   Sudo, which stands for "su 'do'", provides the ability to delegate authority to certain users, groups of users, or system administrators. When configured for system users and/or groups, Sudo can allow a user or group to execute privileged commands that normally only root is allowed to execute.

For more information on Sudo and addition Sudo configuration options, see https://www.sudo.ws.

Rule   Install sudo Package   [ref]

The sudo package can be installed with the following command:
$ sudo dnf install sudo
Rationale:
sudo is a program designed to allow a system administrator to give limited root privileges to users and log root activity. The basic philosophy is to give as few privileges as possible but still allow system users to get their work done.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_sudo_installed
Identifiers:

CCE-87100-4

References:
ism1382, 1384, 1386
nistCM-6(a)
osppFMT_MOF_EXT.1
os-srgSRG-OS-000324-GPOS-00125
anssiR33
cis5.2.1
pcidss42.2.6


[[packages]]
name = "sudo"
version = "*"

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Ensure sudo is installed
  package:
    name: sudo
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-87100-4
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_sudo_installed

Complexity:low
Disruption:low
Reboot:false
Strategy:enable

package --add=sudo

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include install_sudo

class install_sudo {
  package { 'sudo':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "sudo" ; then
    dnf install -y "sudo"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure Users Re-Authenticate for Privilege Escalation - sudo !authenticate   [ref]

The sudo !authenticate option, when specified, allows a user to execute commands using sudo without having to authenticate. This should be disabled by making sure that the !authenticate option does not exist in /etc/sudoers configuration file or any sudo configuration snippets in /etc/sudoers.d/.
Rationale:
Without re-authentication, users may access resources or perform tasks for which they do not have authorization.

When operating systems provide the capability to escalate a functional capability, it is critical that the user re-authenticate.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sudo_remove_no_authenticate
References:
cis-csc1, 12, 15, 16, 5
cobit5DSS05.04, DSS05.10, DSS06.03, DSS06.10
disaCCI-002038
isa-62443-20094.3.3.5.1, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-11, CM-6(a)
nist-csfPR.AC-1, PR.AC-7
os-srgSRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157, SRG-OS-000373-GPOS-00158

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Find /etc/sudoers.d/ files
  ansible.builtin.find:
    paths:
    - /etc/sudoers.d/
  register: sudoers
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-11
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_remove_no_authenticate

- name: Remove lines containing !authenticate from sudoers files
  ansible.builtin.replace:
    regexp: (^(?!#).*[\s]+\!authenticate.*$)
    replace: '# \g<1>'
    path: '{{ item.path }}'
    validate: /usr/sbin/visudo -cf %s
  with_items:
  - path: /etc/sudoers
  - '{{ sudoers.files }}'
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-11
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_remove_no_authenticate

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict

for f in /etc/sudoers /etc/sudoers.d/* ; do
  if [ ! -e "$f" ] ; then
    continue
  fi
  matching_list=$(grep -P '^(?!#).*[\s]+\!authenticate.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      # comment out "!authenticate" matches to preserve user data
      sed -i "s/^${entry}$/# &/g" $f
    done <<< "$matching_list"

    /usr/sbin/visudo -cf $f &> /dev/null || echo "Fail to validate $f with visudo"
  fi
done

Rule   Ensure Users Re-Authenticate for Privilege Escalation - sudo NOPASSWD   [ref]

The sudo NOPASSWD tag, when specified, allows a user to execute commands using sudo without having to authenticate. This should be disabled by making sure that the NOPASSWD tag does not exist in /etc/sudoers configuration file or any sudo configuration snippets in /etc/sudoers.d/.
Rationale:
Without re-authentication, users may access resources or perform tasks for which they do not have authorization.

When operating systems provide the capability to escalate a functional capability, it is critical that the user re-authenticate.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sudo_remove_nopasswd
References:
cis-csc1, 12, 15, 16, 5
cobit5DSS05.04, DSS05.10, DSS06.03, DSS06.10
disaCCI-002038
isa-62443-20094.3.3.5.1, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-11, CM-6(a)
nist-csfPR.AC-1, PR.AC-7
os-srgSRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157, SRG-OS-000373-GPOS-00158

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Find /etc/sudoers.d/ files
  ansible.builtin.find:
    paths:
    - /etc/sudoers.d/
  register: sudoers
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-11
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_remove_nopasswd

- name: Remove lines containing NOPASSWD from sudoers files
  ansible.builtin.replace:
    regexp: (^(?!#).*[\s]+NOPASSWD[\s]*\:.*$)
    replace: '# \g<1>'
    path: '{{ item.path }}'
    validate: /usr/sbin/visudo -cf %s
  with_items:
  - path: /etc/sudoers
  - '{{ sudoers.files }}'
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-11
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_remove_nopasswd

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict

for f in /etc/sudoers /etc/sudoers.d/* ; do
  if [ ! -e "$f" ] ; then
    continue
  fi
  matching_list=$(grep -P '^(?!#).*[\s]+NOPASSWD[\s]*\:.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      # comment out "NOPASSWD" matches to preserve user data
      sed -i "s/^${entry}$/# &/g" $f
    done <<< "$matching_list"

    /usr/sbin/visudo -cf $f &> /dev/null || echo "Fail to validate $f with visudo"
  fi
done

Rule   Ensure Users Re-Authenticate for Privilege Escalation - sudo   [ref]

The sudo NOPASSWD and !authenticate option, when specified, allows a user to execute commands using sudo without having to authenticate. This should be disabled by making sure that NOPASSWD and/or !authenticate do not exist in /etc/sudoers configuration file or any sudo configuration snippets in /etc/sudoers.d/."
Rationale:
Without re-authentication, users may access resources or perform tasks for which they do not have authorization.

When operating systems provide the capability to escalate a functional capability, it is critical that the user re-authenticate.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sudo_require_authentication
References:
cis-csc1, 12, 15, 16, 5
cobit5DSS05.04, DSS05.10, DSS06.03, DSS06.10
disaCCI-002038
isa-62443-20094.3.3.5.1, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-11, CM-6(a)
nist-csfPR.AC-1, PR.AC-7
os-srgSRG-OS-000373-GPOS-00156
cis5.2.4
pcidss42.2.6

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Find /etc/sudoers.d/ files
  ansible.builtin.find:
    paths:
    - /etc/sudoers.d/
  register: sudoers
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-11
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_require_authentication

- name: Remove lines containing NOPASSWD from sudoers files
  ansible.builtin.replace:
    regexp: (^(?!#).*[\s]+NOPASSWD[\s]*\:.*$)
    replace: '# \g<1>'
    path: '{{ item.path }}'
    validate: /usr/sbin/visudo -cf %s
  with_items:
  - path: /etc/sudoers
  - '{{ sudoers.files }}'
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-11
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_require_authentication

- name: Find /etc/sudoers.d/ files
  ansible.builtin.find:
    paths:
    - /etc/sudoers.d/
  register: sudoers
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-11
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_require_authentication

- name: Remove lines containing !authenticate from sudoers files
  ansible.builtin.replace:
    regexp: (^(?!#).*[\s]+\!authenticate.*$)
    replace: '# \g<1>'
    path: '{{ item.path }}'
    validate: /usr/sbin/visudo -cf %s
  with_items:
  - path: /etc/sudoers
  - '{{ sudoers.files }}'
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-11
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_require_authentication

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict

for f in /etc/sudoers /etc/sudoers.d/* ; do
  if [ ! -e "$f" ] ; then
    continue
  fi
  matching_list=$(grep -P '^(?!#).*[\s]+NOPASSWD[\s]*\:.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      # comment out "NOPASSWD" matches to preserve user data
      sed -i "s/^${entry}$/# &/g" $f
    done <<< "$matching_list"

    /usr/sbin/visudo -cf $f &> /dev/null || echo "Fail to validate $f with visudo"
  fi
done

for f in /etc/sudoers /etc/sudoers.d/* ; do
  if [ ! -e "$f" ] ; then
    continue
  fi
  matching_list=$(grep -P '^(?!#).*[\s]+\!authenticate.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      # comment out "!authenticate" matches to preserve user data
      sed -i "s/^${entry}$/# &/g" $f
    done <<< "$matching_list"

    /usr/sbin/visudo -cf $f &> /dev/null || echo "Fail to validate $f with visudo"
  fi
done
Group   System Tooling / Utilities   Group contains 3 rules
[ref]   The following checks evaluate the system for recommended base packages -- both for installation and removal.

Rule   Install dnf-plugin-subscription-manager Package   [ref]

The dnf-plugin-subscription-manager package can be installed with the following command:
$ sudo dnf install dnf-plugin-subscription-manager
Rationale:
This package provides plugins to interact with repositories and subscriptions from the Red Hat entitlement platform; contains subscription-manager and product-id plugins.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_dnf-plugin-subscription-manager_installed
References:
ism0940, 1144, 1467, 1472, 1483, 1493, 1494, 1495
osppFPT_TUD_EXT.1, FPT_TUD_EXT.2
os-srgSRG-OS-000366-GPOS-00153


[[packages]]
name = "dnf-plugin-subscription-manager"
version = "*"

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Ensure dnf-plugin-subscription-manager is installed
  package:
    name: dnf-plugin-subscription-manager
    state: present
  tags:
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_dnf-plugin-subscription-manager_installed

Complexity:low
Disruption:low
Reboot:false
Strategy:enable

package --add=dnf-plugin-subscription-manager

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include install_dnf-plugin-subscription-manager

class install_dnf-plugin-subscription-manager {
  package { 'dnf-plugin-subscription-manager':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Reboot:false
Strategy:enable

if ! rpm -q --quiet "dnf-plugin-subscription-manager" ; then
    dnf install -y "dnf-plugin-subscription-manager"
fi

Rule   Install rear Package   [ref]

The rear package can be installed with the following command:
$ sudo dnf install rear
Rationale:
rear contains the Relax-and-Recover (ReaR) utility. ReaR produces a bootable image of a system and restores from backup using this image.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_rear_installed


[[packages]]
name = "rear"
version = "*"

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Ensure rear is installed
  package:
    name: rear
    state: present
  when: not ( ( ( ansible_architecture == "aarch64" and ansible_distribution == 'OracleLinux'
    and ansible_distribution_version is version('9.0', '>=') ) or ( ansible_architecture
    == "aarch64" and ansible_distribution == 'RedHat' and ansible_distribution_version
    is version('9.0', '>=') ) or ( ansible_distribution == 'RedHat' and ansible_distribution_version
    is version('8.4', '<=') and ansible_architecture == "s390x" ) ) )
  tags:
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_rear_installed

Complexity:low
Disruption:low
Reboot:false
Strategy:enable

package --add=rear

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include install_rear

class install_rear {
  package { 'rear':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if ! ( ( ( grep -q aarch64 /proc/sys/kernel/osrelease && grep -qP "^ID=[\"']?ol[\"']?$" "/etc/os-release" && { real="$(grep -P "^VERSION_ID=[\"']?[\w.]+[\"']?$" /etc/os-release | sed "s/^VERSION_ID=[\"']\?\([^\"']\+\)[\"']\?$/\1/")"; expected="9.0"; printf "%s\n%s" "$expected" "$real" | sort -VC; } ) || ( grep -q aarch64 /proc/sys/kernel/osrelease && grep -qP "^ID=[\"']?rhel[\"']?$" "/etc/os-release" && { real="$(grep -P "^VERSION_ID=[\"']?[\w.]+[\"']?$" /etc/os-release | sed "s/^VERSION_ID=[\"']\?\([^\"']\+\)[\"']\?$/\1/")"; expected="9.0"; printf "%s\n%s" "$expected" "$real" | sort -VC; } ) || ( grep -qP "^ID=[\"']?rhel[\"']?$" "/etc/os-release" && { real="$(grep -P "^VERSION_ID=[\"']?[\w.]+[\"']?$" /etc/os-release | sed "s/^VERSION_ID=[\"']\?\([^\"']\+\)[\"']\?$/\1/")"; expected="8.4"; printf "%s\n%s" "$real" "$expected" | sort -VC; } && grep -q s390x /proc/sys/kernel/osrelease ) ) ); then

if ! rpm -q --quiet "rear" ; then
    dnf install -y "rear"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Install subscription-manager Package   [ref]

The subscription-manager package can be installed with the following command:
$ sudo dnf install subscription-manager
Rationale:
Red Hat Subscription Manager is a local service which tracks installed products and subscriptions on a local system to help manage subscription assignments. It communicates with the backend subscription service (the Customer Portal or an on-premise server such as Subscription Asset Manager) and works with content management tools such as .
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_subscription-manager_installed
References:
ism0940, 1144, 1467, 1472, 1483, 1493, 1494, 1495
osppFPT_TUD_EXT.1, FPT_TUD_EXT.2
os-srgSRG-OS-000366-GPOS-00153


[[packages]]
name = "subscription-manager"
version = "*"

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Ensure subscription-manager is installed
  package:
    name: subscription-manager
    state: present
  tags:
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_subscription-manager_installed

Complexity:low
Disruption:low
Reboot:false
Strategy:enable

package --add=subscription-manager

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include install_subscription-manager

class install_subscription-manager {
  package { 'subscription-manager':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Reboot:false
Strategy:enable

if ! rpm -q --quiet "subscription-manager" ; then
    dnf install -y "subscription-manager"
fi
Group   Updating Software   Group contains 7 rules
[ref]   The dnf command line tool is used to install and update software packages. The system also provides a graphical software update tool in the System menu, in the Administration submenu, called Software Update.

Red Hat Enterprise Linux 10 systems contain an installed software catalog called the RPM database, which records metadata of installed packages. Consistently using dnf or the graphical Software Update for all software installation allows for insight into the current inventory of installed software on the system.

Rule   Configure dnf-automatic to Install Available Updates Automatically   [ref]

To ensure that the packages comprising the available updates will be automatically installed by dnf-automatic, set apply_updates to yes under [commands] section in /etc/dnf/automatic.conf.
Rationale:
Installing software updates is a fundamental mitigation against the exploitation of publicly-known vulnerabilities. If the most recent security patches and updates are not installed, unauthorized users may take advantage of weaknesses in the unpatched software. The lack of prompt attention to patching could result in a system compromise. The automated installation of updates ensures that recent security patches are applied in a timely manner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_dnf-automatic_apply_updates
References:
ism0940, 1144, 1467, 1472, 1483, 1493, 1494, 1495
nistSI-2(5), CM-6(a), SI-2(c)
osppFMT_SMF_EXT.1
os-srgSRG-OS-000191-GPOS-00080
anssiR61

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Configure dnf-automatic to Install Available Updates Automatically
  ini_file:
    dest: /etc/dnf/automatic.conf
    section: commands
    option: apply_updates
    value: 'yes'
    create: true
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-2(5)
  - NIST-800-53-SI-2(c)
  - dnf-automatic_apply_updates
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy


found=false

# set value in all files if they contain section or key
for f in $(echo -n "/etc/dnf/automatic.conf"); do
    if [ ! -e "$f" ]; then
        continue
    fi

    # find key in section and change value
    if grep -qzosP "[[:space:]]*\[commands\]([^\n\[]*\n+)+?[[:space:]]*apply_updates" "$f"; then
            sed -i "s/apply_updates[^(\n)]*/apply_updates = yes/" "$f"
            found=true

    # find section and add key = value to it
    elif grep -qs "[[:space:]]*\[commands\]" "$f"; then
            sed -i "/[[:space:]]*\[commands\]/a apply_updates = yes" "$f"
            found=true
    fi
done

# if section not in any file, append section with key = value to FIRST file in files parameter
if ! $found ; then
    file=$(echo "/etc/dnf/automatic.conf" | cut -f1 -d ' ')
    mkdir -p "$(dirname "$file")"
    echo -e "[commands]\napply_updates = yes" >> "$file"
fi

Rule   Configure dnf-automatic to Install Only Security Updates   [ref]

To configure dnf-automatic to install only security updates automatically, set upgrade_type to security under [commands] section in /etc/dnf/automatic.conf.
Rationale:
By default, dnf-automatic installs all available updates. Reducing the amount of updated packages only to updates that were issued as a part of a security advisory increases the system stability.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_dnf-automatic_security_updates_only
References:
nistSI-2(5), CM-6(a), SI-2(c)
osppFMT_SMF_EXT.1
os-srgSRG-OS-000191-GPOS-00080
anssiR61

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Configure dnf-automatic to Install Only Security Updates
  ini_file:
    dest: /etc/dnf/automatic.conf
    section: commands
    option: upgrade_type
    value: security
    create: true
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-2(5)
  - NIST-800-53-SI-2(c)
  - dnf-automatic_security_updates_only
  - low_complexity
  - low_severity
  - medium_disruption
  - no_reboot_needed
  - unknown_strategy


found=false

# set value in all files if they contain section or key
for f in $(echo -n "/etc/dnf/automatic.conf"); do
    if [ ! -e "$f" ]; then
        continue
    fi

    # find key in section and change value
    if grep -qzosP "[[:space:]]*\[commands\]([^\n\[]*\n+)+?[[:space:]]*upgrade_type" "$f"; then
            sed -i "s/upgrade_type[^(\n)]*/upgrade_type = security/" "$f"
            found=true

    # find section and add key = value to it
    elif grep -qs "[[:space:]]*\[commands\]" "$f"; then
            sed -i "/[[:space:]]*\[commands\]/a upgrade_type = security" "$f"
            found=true
    fi
done

# if section not in any file, append section with key = value to FIRST file in files parameter
if ! $found ; then
    file=$(echo "/etc/dnf/automatic.conf" | cut -f1 -d ' ')
    mkdir -p "$(dirname "$file")"
    echo -e "[commands]\nupgrade_type = security" >> "$file"
fi

Rule   Ensure gpgcheck Enabled In Main dnf Configuration   [ref]

The gpgcheck option controls whether RPM packages' signatures are always checked prior to installation. To configure dnf to check package signatures before installing them, ensure the following line appears in /etc/dnf/dnf.conf in the [main] section:
gpgcheck=1
Rationale:
Changes to any software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor.
Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA).
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_gpgcheck_globally_activated
References:
cis-csc11, 2, 3, 9
cjis5.10.4.1
cobit5APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02
cui3.4.8
disaCCI-001749
hipaa164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i)
isa-62443-20094.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6
iso27001-2013A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4
nistCM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), SA-12, SA-12(10), CM-11(a), CM-11(b)
nist-csfPR.DS-6, PR.DS-8, PR.IP-1
osppFPT_TUD_EXT.1, FPT_TUD_EXT.2
pcidssReq-6.2
os-srgSRG-OS-000366-GPOS-00153
anssiR59
cis1.2.1.2
pcidss46.3.3

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - configure_strategy
  - ensure_gpgcheck_globally_activated
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed

- name: Ensure GPG check is globally activated
  ini_file:
    dest: /etc/dnf/dnf.conf
    section: main
    option: gpgcheck
    value: 1
    no_extra_spaces: true
    create: false
  when: '"dnf" in ansible_facts.packages'
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - configure_strategy
  - ensure_gpgcheck_globally_activated
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed

# Remediation is applicable only in certain platforms
if rpm --quiet -q dnf; then

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^gpgcheck")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^gpgcheck\\>" "/etc/dnf/dnf.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^gpgcheck\\>.*/$escaped_formatted_output/gi" "/etc/dnf/dnf.conf"
else
    if [[ -s "/etc/dnf/dnf.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/dnf/dnf.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/dnf/dnf.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/dnf/dnf.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure gpgcheck Enabled for Local Packages   [ref]

dnf should be configured to verify the signature(s) of local packages prior to installation. To configure dnf to verify signatures of local packages, set the localpkg_gpgcheck to 1 in /etc/dnf/dnf.conf.
Rationale:
Changes to any software components can have significant effects to the overall security of the operating system. This requirement ensures the software has not been tampered and has been provided by a trusted vendor.

Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_gpgcheck_local_packages
References:
cis-csc11, 3, 9
cobit5BAI10.01, BAI10.02, BAI10.03, BAI10.05
cui3.4.8
disaCCI-001749
hipaa164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i)
isa-62443-20094.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 7.6
iso27001-2013A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4
nistCM-11(a), CM-11(b), CM-6(a), CM-5(3), SA-12, SA-12(10)
nist-csfPR.IP-1
osppFPT_TUD_EXT.1, FPT_TUD_EXT.2
os-srgSRG-OS-000366-GPOS-00153
anssiR59

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - ensure_gpgcheck_local_packages
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed
  - unknown_strategy

- name: Ensure GPG check Enabled for Local Packages (dnf)
  block:

  - name: Check stats of dnf
    stat:
      path: /etc/dnf/dnf.conf
    register: pkg

  - name: Check if config file of dnf is a symlink
    ansible.builtin.set_fact:
      pkg_config_file_symlink: '{{ pkg.stat.lnk_target if pkg.stat.lnk_target is match("^/.*")
        else "/etc/dnf/dnf.conf" | dirname ~ "/" ~ pkg.stat.lnk_target }}'
    when: pkg.stat.lnk_target is defined

  - name: Ensure GPG check Enabled for Local Packages (dnf)
    ini_file:
      dest: '{{ pkg_config_file_symlink |  default("/etc/dnf/dnf.conf") }}'
      section: main
      option: localpkg_gpgcheck
      value: 1
      no_extra_spaces: true
      create: true
  when: '"dnf" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - ensure_gpgcheck_local_packages
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed
  - unknown_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q dnf; then

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^localpkg_gpgcheck")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^localpkg_gpgcheck\\>" "/etc/dnf/dnf.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^localpkg_gpgcheck\\>.*/$escaped_formatted_output/gi" "/etc/dnf/dnf.conf"
else
    if [[ -s "/etc/dnf/dnf.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/dnf/dnf.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/dnf/dnf.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/dnf/dnf.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure gpgcheck Enabled for All dnf Package Repositories   [ref]

To ensure signature checking is not disabled for any repos, remove any lines from files in /etc/yum.repos.d of the form:
gpgcheck=0
Rationale:
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA)."
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_gpgcheck_never_disabled
References:
cis-csc11, 2, 3, 9
cjis5.10.4.1
cobit5APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02
cui3.4.8
disaCCI-001749
hipaa164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i)
isa-62443-20094.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6
iso27001-2013A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4
nistCM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), SA-12, SA-12(10), CM-11(a), CM-11(b)
nist-csfPR.DS-6, PR.DS-8, PR.IP-1
osppFPT_TUD_EXT.1, FPT_TUD_EXT.2
pcidssReq-6.2
os-srgSRG-OS-000366-GPOS-00153
anssiR59
pcidss46.3.3

Complexity:low
Disruption:medium
Reboot:false
Strategy:enable
- name: Grep for dnf repo section names
  shell: |
    set -o pipefail
    grep -HEr '^\[.+\]' -r /etc/yum.repos.d/
  register: repo_grep_results
  failed_when: repo_grep_results.rc not in [0, 1]
  changed_when: false
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - enable_strategy
  - ensure_gpgcheck_never_disabled
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed

- name: Set gpgcheck=1 for each dnf repo
  ini_file:
    path: '{{ item[0] }}'
    section: '{{ item[1] }}'
    option: gpgcheck
    value: '1'
    no_extra_spaces: true
  loop: '{{ repo_grep_results.stdout |regex_findall( ''(.+\.repo):\[(.+)\]\n?'' )
    if repo_grep_results is not skipped else [] }}'
  when: repo_grep_results is not skipped
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - enable_strategy
  - ensure_gpgcheck_never_disabled
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed


sed -i 's/gpgcheck\s*=.*/gpgcheck=1/g' /etc/yum.repos.d/*

Rule   Ensure Red Hat GPG Key Installed   [ref]

To ensure the system can cryptographically verify base software packages come from Red Hat (and to connect to the Red Hat Network to receive them), the Red Hat GPG key must properly be installed. To install the Red Hat GPG key, run:
$ sudo subscription-manager register
If the system is not connected to the Internet or an RHN Satellite, then install the Red Hat GPG key from trusted media such as the Red Hat installation CD-ROM or DVD. Assuming the disc is mounted in /media/cdrom, use the following command as the root user to import it into the keyring:
$ sudo rpm --import /media/cdrom/RPM-GPG-KEY
Alternatively, the key may be pre-loaded during the RHEL installation. In such cases, the key can be installed by running the following command:
sudo rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
Rationale:
Changes to software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor. The Red Hat GPG key is necessary to cryptographically verify packages are from Red Hat.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_redhat_gpgkey_installed
References:
cis-csc11, 2, 3, 9
cjis5.10.4.1
cobit5APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02
cui3.4.8
disaCCI-001749
hipaa164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i)
isa-62443-20094.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6
iso27001-2013A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4
nerc-cipCIP-003-8 R4.2, CIP-003-8 R6, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nistCM-5(3), SI-7, SC-12, SC-12(3), CM-6(a)
nist-csfPR.DS-6, PR.DS-8, PR.IP-1
osppFPT_TUD_EXT.1, FPT_TUD_EXT.2
pcidssReq-6.2
os-srgSRG-OS-000366-GPOS-00153
anssiR59
pcidss46.3.3

Complexity:medium
Disruption:medium
Reboot:false
Strategy:restrict
- name: Read permission of GPG key directory
  stat:
    path: /etc/pki/rpm-gpg/
  register: gpg_key_directory_permission
  check_mode: false
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - ensure_redhat_gpgkey_installed
  - high_severity
  - medium_complexity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy

- name: Read signatures in GPG key
  command: gpg --with-fingerprint --with-colons "/etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release"
  changed_when: false
  register: gpg_fingerprints
  check_mode: false
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - ensure_redhat_gpgkey_installed
  - high_severity
  - medium_complexity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy

- name: Set Fact - Installed GPG Fingerprints
  set_fact:
    gpg_installed_fingerprints: |-
      {{ gpg_fingerprints.stdout | regex_findall('^pub.*
      (?:^fpr[:]*)([0-9A-Fa-f]*)', '\1') | list }}
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - ensure_redhat_gpgkey_installed
  - high_severity
  - medium_complexity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy

- name: Set Fact - Valid fingerprints
  set_fact:
    gpg_valid_fingerprints:
    - ''
    - ''
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - ensure_redhat_gpgkey_installed
  - high_severity
  - medium_complexity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy

- name: Import RedHat GPG key
  rpm_key:
    state: present
    key: /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
  when:
  - gpg_key_directory_permission.stat.mode <= '0755'
  - (gpg_installed_fingerprints | difference(gpg_valid_fingerprints)) | length ==
    0
  - gpg_installed_fingerprints | length > 0
  - ansible_distribution == "RedHat"
  tags:
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - ensure_redhat_gpgkey_installed
  - high_severity
  - medium_complexity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy

# The two fingerprints below are retrieved from https://access.redhat.com/security/team/key
readonly REDHAT_RELEASE_FINGERPRINT=""
readonly REDHAT_AUXILIARY_FINGERPRINT=""

# Location of the key we would like to import (once it's integrity verified)
readonly REDHAT_RELEASE_KEY="/etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release"

RPM_GPG_DIR_PERMS=$(stat -c %a "$(dirname "$REDHAT_RELEASE_KEY")")

# Verify /etc/pki/rpm-gpg directory permissions are safe
if [ "${RPM_GPG_DIR_PERMS}" -le "755" ]
then
  # If they are safe, try to obtain fingerprints from the key file
  # (to ensure there won't be e.g. CRC error).

  readarray -t GPG_OUT < <(gpg --with-fingerprint --with-colons "$REDHAT_RELEASE_KEY" | grep "^fpr" | cut -d ":" -f 10)

  GPG_RESULT=$?
  # No CRC error, safe to proceed
  if [ "${GPG_RESULT}" -eq "0" ]
  then
    echo "${GPG_OUT[*]}" | grep -vE "${REDHAT_RELEASE_FINGERPRINT}|${REDHAT_AUXILIARY_FINGERPRINT}" || {
      # If $REDHAT_RELEASE_KEY file doesn't contain any keys with unknown fingerprint, import it
      rpm --import "${REDHAT_RELEASE_KEY}"
    }
  fi
fi

Rule   Ensure Software Patches Installed   [ref]



NOTE: U.S. Defense systems are required to be patched within 30 days or sooner as local policy dictates.
Warning:  Red Hat Enterprise Linux 10 does not have a corresponding OVAL CVE Feed. Therefore, this will result in a "not checked" result during a scan.
Rationale:
Installing software updates is a fundamental mitigation against the exploitation of publicly-known vulnerabilities. If the most recent security patches and updates are not installed, unauthorized users may take advantage of weaknesses in the unpatched software. The lack of prompt attention to patching could result in a system compromise.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_security_patches_up_to_date
References:
cis-csc18, 20, 4
cjis5.10.4.1
cobit5APO12.01, APO12.02, APO12.03, APO12.04, BAI03.10, DSS05.01, DSS05.02
disaCCI-000366, CCI-001227
isa-62443-20094.2.3, 4.2.3.12, 4.2.3.7, 4.2.3.9
iso27001-2013A.12.6.1, A.14.2.3, A.16.1.3, A.18.2.2, A.18.2.3
nistSI-2(5), SI-2(c), CM-6(a)
nist-csfID.RA-1, PR.IP-12
osppFMT_MOF_EXT.1
pcidssReq-6.2
os-srgSRG-OS-000480-GPOS-00227
anssiR61
pcidss46.3.3
Group   Account and Access Control   Group contains 12 groups and 32 rules
[ref]   In traditional Unix security, if an attacker gains shell access to a certain login account, they can perform any action or access any file to which that account has access. Therefore, making it more difficult for unauthorized people to gain shell access to accounts, particularly to privileged accounts, is a necessary part of securing a system. This section introduces mechanisms for restricting access to accounts under Red Hat Enterprise Linux 10.
Group   Protect Accounts by Configuring PAM   Group contains 4 groups and 17 rules
[ref]   PAM, or Pluggable Authentication Modules, is a system which implements modular authentication for Linux programs. PAM provides a flexible and configurable architecture for authentication, and it should be configured to minimize exposure to unnecessary risk. This section contains guidance on how to accomplish that.

PAM is implemented as a set of shared objects which are loaded and invoked whenever an application wishes to authenticate a user. Typically, the application must be running as root in order to take advantage of PAM, because PAM's modules often need to be able to access sensitive stores of account information, such as /etc/shadow. Traditional privileged network listeners (e.g. sshd) or SUID programs (e.g. sudo) already meet this requirement. An SUID root application, userhelper, is provided so that programs which are not SUID or privileged themselves can still take advantage of PAM.

PAM looks in the directory /etc/pam.d for application-specific configuration information. For instance, if the program login attempts to authenticate a user, then PAM's libraries follow the instructions in the file /etc/pam.d/login to determine what actions should be taken.

One very important file in /etc/pam.d is /etc/pam.d/system-auth. This file, which is included by many other PAM configuration files, defines 'default' system authentication measures. Modifying this file is a good way to make far-reaching authentication changes, for instance when implementing a centralized authentication service.
Warning:  Be careful when making changes to PAM's configuration files. The syntax for these files is complex, and modifications can have unexpected consequences. The default configurations shipped with applications should be sufficient for most users.
Warning:  Running authconfig or system-config-authentication will re-write the PAM configuration files, destroying any manually made changes and replacing them with a series of system defaults. One reference to the configuration file syntax can be found at https://fossies.org/linux/Linux-PAM-docs/doc/sag/Linux-PAM_SAG.pdf.
Group   Set Lockouts for Failed Password Attempts   Group contains 6 rules
[ref]   The pam_faillock PAM module provides the capability to lock out user accounts after a number of failed login attempts. Its documentation is available in /usr/share/doc/pam-VERSION/txts/README.pam_faillock.

Warning:  Locking out user accounts presents the risk of a denial-of-service attack. The lockout policy must weigh whether the risk of such a denial-of-service attack outweighs the benefits of thwarting password guessing attacks.

Rule   Lock Accounts After Failed Password Attempts   [ref]

This rule configures the system to lock out accounts after a number of incorrect login attempts using pam_faillock.so. pam_faillock.so module requires multiple entries in pam files. These entries must be carefully defined to work as expected. Ensure that the file /etc/security/faillock.conf contains the following entry: deny = <count> Where count should be less than or equal to 3 and greater than 0. In order to avoid errors when manually editing these files, it is recommended to use the appropriate tools, such as authselect or authconfig, depending on the OS version.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. If the system supports the /etc/security/faillock.conf file, the pam_faillock parameters should be defined in faillock.conf file.
Rationale:
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, also known as brute-forcing, is reduced. Limits are imposed by locking the account.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny
References:
cis-csc1, 12, 15, 16
cjis5.5.3
cobit5DSS05.04, DSS05.10, DSS06.10
cui3.1.8
disaCCI-000044, CCI-002236, CCI-002237, CCI-002238
isa-62443-20094.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nistCM-6(a), AC-7(a)
nist-csfPR.AC-7
osppFIA_AFL.1
pcidssReq-8.1.6
os-srgSRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005
anssiR31
cis5.3.3.1.1
pcidss48.3.4

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Check if system relies on authselect
    tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Remediation where authselect
    tool is present
  block:

  - name: Lock Accounts After Failed Password Attempts - Check integrity of authselect
      current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Lock Accounts After Failed Password Attempts - Informative message based
      on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Lock Accounts After Failed Password Attempts - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Lock Accounts After Failed Password Attempts - Ensure "with-faillock" feature
      is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-faillock
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-faillock")

  - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
      are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Remediation where authselect
    tool is not present
  block:

  - name: Lock Accounts After Failed Password Attempts - Check if pam_faillock.so
      is already enabled
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail)
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_is_enabled

  - name: Lock Accounts After Failed Password Attempts - Enable pam_faillock.so preauth
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so preauth
      insertbefore: ^auth.*sufficient.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Lock Accounts After Failed Password Attempts - Enable pam_faillock.so authfail
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so authfail
      insertbefore: ^auth.*required.*pam_deny\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Lock Accounts After Failed Password Attempts - Enable pam_faillock.so account
      section editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: account     required      pam_faillock.so
      insertbefore: ^account.*required.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_authselect_present.stat.exists
  tags:
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_deny # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_deny: !!str 3
  tags:
    - always

- name: Lock Accounts After Failed Password Attempts - Check the presence of /etc/security/faillock.conf
    file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Ensure the pam_faillock.so
    deny parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*deny\s*=
    line: deny = {{ var_accounts_passwords_pam_faillock_deny }}
    state: present
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Ensure the pam_faillock.so
    deny parameter not in PAM files
  block:

  - name: Lock Accounts After Failed Password Attempts - Check if /etc/pam.d/system-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/system-auth
    register: result_pam_file_present

  - name: Lock Accounts After Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Lock Accounts After Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/system-auth

    - name: Lock Accounts After Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Lock Accounts After Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Lock Accounts After Failed Password Attempts - Informative message based
          on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Lock Accounts After Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Check if any custom profile
          with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Lock Accounts After Failed Password Attempts - Change the PAM file to
          be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Lock Accounts After Failed Password Attempts - Ensure the "deny" option
        from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bdeny\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists

  - name: Lock Accounts After Failed Password Attempts - Check if /etc/pam.d/password-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/password-auth
    register: result_pam_file_present

  - name: Lock Accounts After Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Lock Accounts After Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/password-auth

    - name: Lock Accounts After Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Lock Accounts After Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Lock Accounts After Failed Password Attempts - Informative message based
          on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Lock Accounts After Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Check if any custom profile
          with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Lock Accounts After Failed Password Attempts - Change the PAM file to
          be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Lock Accounts After Failed Password Attempts - Ensure the "deny" option
        from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bdeny\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Ensure the pam_faillock.so
    deny parameter in PAM files
  block:

  - name: Lock Accounts After Failed Password Attempts - Check if pam_faillock.so
      deny parameter is already enabled in pam files
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail).*deny
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_deny_parameter_is_present

  - name: Lock Accounts After Failed Password Attempts - Ensure the inclusion of pam_faillock.so
      preauth deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
      line: \1required\3 deny={{ var_accounts_passwords_pam_faillock_deny }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found == 0

  - name: Lock Accounts After Failed Password Attempts - Ensure the inclusion of pam_faillock.so
      authfail deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
      line: \1required\3 deny={{ var_accounts_passwords_pam_faillock_deny }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found == 0

  - name: Lock Accounts After Failed Password Attempts - Ensure the desired value
      for pam_faillock.so preauth deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)(deny)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_deny }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found > 0

  - name: Lock Accounts After Failed Password Attempts - Ensure the desired value
      for pam_faillock.so authfail deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)(deny)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_deny }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found > 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_faillock_conf_check.stat.exists
  tags:
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_faillock_deny='3'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*deny\s*="
    line="deny = $var_accounts_passwords_pam_faillock_deny"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(deny\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_deny"'|g' $FAILLOCK_CONF
    fi
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP '^\s*auth\s.*\bpam_faillock.so\s.*\bdeny\b' "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks 's/(.*auth.*pam_faillock.so.*)\bdeny\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so (preauth|authfail).*deny' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*silent.*/ s/$/ deny='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ deny='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*silent.*\)\('"deny"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_deny"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"deny"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_deny"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Configure the root Account for Failed Password Attempts   [ref]

This rule configures the system to lock out the root account after a number of incorrect login attempts using pam_faillock.so. pam_faillock.so module requires multiple entries in pam files. These entries must be carefully defined to work as expected. In order to avoid errors when manually editing these files, it is recommended to use the appropriate tools, such as authselect or authconfig, depending on the OS version.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. If the system supports the /etc/security/faillock.conf file, the pam_faillock parameters should be defined in faillock.conf file.
Rationale:
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, also known as brute-forcing, is reduced. Limits are imposed by locking the account.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny_root
References:
cis-csc1, 12, 15, 16
cobit5DSS05.04, DSS05.10, DSS06.10
disaCCI-002238, CCI-000044
isa-62443-20094.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nistCM-6(a), AC-7(b), IA-5(c)
nist-csfPR.AC-7
osppFMT_MOF_EXT.1
os-srgSRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005
anssiR31
cis5.3.3.1.3

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_faillock_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Check if system
    relies on authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_faillock_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Remediation where
    authselect tool is present
  block:

  - name: Configure the root Account for Failed Password Attempts - Check integrity
      of authselect current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Configure the root Account for Failed Password Attempts - Informative message
      based on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Configure the root Account for Failed Password Attempts - Get authselect
      current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Configure the root Account for Failed Password Attempts - Ensure "with-faillock"
      feature is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-faillock
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-faillock")

  - name: Configure the root Account for Failed Password Attempts - Ensure authselect
      changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_faillock_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Remediation where
    authselect tool is not present
  block:

  - name: Configure the root Account for Failed Password Attempts - Check if pam_faillock.so
      is already enabled
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail)
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_is_enabled

  - name: Configure the root Account for Failed Password Attempts - Enable pam_faillock.so
      preauth editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so preauth
      insertbefore: ^auth.*sufficient.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Configure the root Account for Failed Password Attempts - Enable pam_faillock.so
      authfail editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so authfail
      insertbefore: ^auth.*required.*pam_deny\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Configure the root Account for Failed Password Attempts - Enable pam_faillock.so
      account section editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: account     required      pam_faillock.so
      insertbefore: ^account.*required.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_authselect_present.stat.exists
  tags:
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_faillock_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Check the presence
    of /etc/security/faillock.conf file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_faillock_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Ensure the pam_faillock.so
    even_deny_root parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*even_deny_root
    line: even_deny_root
    state: present
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_faillock_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Ensure the pam_faillock.so
    even_deny_root parameter not in PAM files
  block:

  - name: Configure the root Account for Failed Password Attempts - Check if /etc/pam.d/system-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/system-auth
    register: result_pam_file_present

  - name: Configure the root Account for Failed Password Attempts - Check the proper
      remediation for the system
    block:

    - name: Configure the root Account for Failed Password Attempts - Define the PAM
        file to be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/system-auth

    - name: Configure the root Account for Failed Password Attempts - Check if system
        relies on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Configure the root Account for Failed Password Attempts - Ensure authselect
        custom profile is used if authselect is present
      block:

      - name: Configure the root Account for Failed Password Attempts - Check integrity
          of authselect current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Configure the root Account for Failed Password Attempts - Informative
          message based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Configure the root Account for Failed Password Attempts - Get authselect
          current profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Configure the root Account for Failed Password Attempts - Define the
          current authselect profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Configure the root Account for Failed Password Attempts - Define the
          new authselect custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Configure the root Account for Failed Password Attempts - Get authselect
          current features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Configure the root Account for Failed Password Attempts - Check if any
          custom profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Configure the root Account for Failed Password Attempts - Create an
          authselect custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Configure the root Account for Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Configure the root Account for Failed Password Attempts - Ensure the
          authselect custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Configure the root Account for Failed Password Attempts - Restore the
          authselect features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Configure the root Account for Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Configure the root Account for Failed Password Attempts - Change the
          PAM file to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Configure the root Account for Failed Password Attempts - Ensure the "even_deny_root"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\beven_deny_root\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Configure the root Account for Failed Password Attempts - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists

  - name: Configure the root Account for Failed Password Attempts - Check if /etc/pam.d/password-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/password-auth
    register: result_pam_file_present

  - name: Configure the root Account for Failed Password Attempts - Check the proper
      remediation for the system
    block:

    - name: Configure the root Account for Failed Password Attempts - Define the PAM
        file to be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/password-auth

    - name: Configure the root Account for Failed Password Attempts - Check if system
        relies on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Configure the root Account for Failed Password Attempts - Ensure authselect
        custom profile is used if authselect is present
      block:

      - name: Configure the root Account for Failed Password Attempts - Check integrity
          of authselect current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Configure the root Account for Failed Password Attempts - Informative
          message based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Configure the root Account for Failed Password Attempts - Get authselect
          current profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Configure the root Account for Failed Password Attempts - Define the
          current authselect profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Configure the root Account for Failed Password Attempts - Define the
          new authselect custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Configure the root Account for Failed Password Attempts - Get authselect
          current features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Configure the root Account for Failed Password Attempts - Check if any
          custom profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Configure the root Account for Failed Password Attempts - Create an
          authselect custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Configure the root Account for Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Configure the root Account for Failed Password Attempts - Ensure the
          authselect custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Configure the root Account for Failed Password Attempts - Restore the
          authselect features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Configure the root Account for Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Configure the root Account for Failed Password Attempts - Change the
          PAM file to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Configure the root Account for Failed Password Attempts - Ensure the "even_deny_root"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\beven_deny_root\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Configure the root Account for Failed Password Attempts - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_faillock_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Ensure the pam_faillock.so
    even_deny_root parameter in PAM files
  block:

  - name: Configure the root Account for Failed Password Attempts - Check if pam_faillock.so
      even_deny_root parameter is already enabled in pam files
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail).*even_deny_root
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_even_deny_root_parameter_is_present

  - name: Configure the root Account for Failed Password Attempts - Ensure the inclusion
      of pam_faillock.so preauth even_deny_root parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
      line: \1required\3 even_deny_root
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_even_deny_root_parameter_is_present.found == 0

  - name: Configure the root Account for Failed Password Attempts - Ensure the inclusion
      of pam_faillock.so authfail even_deny_root parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
      line: \1required\3 even_deny_root
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_even_deny_root_parameter_is_present.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_faillock_conf_check.stat.exists
  tags:
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_faillock_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*even_deny_root"
    line="even_deny_root"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    fi
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP '^\s*auth\s.*\bpam_faillock.so\s.*\beven_deny_root\b' "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks 's/(.*auth.*pam_faillock.so.*)\beven_deny_root\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so (preauth|authfail).*even_deny_root' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*silent.*/ s/$/ even_deny_root/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ even_deny_root/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set Interval For Counting Failed Password Attempts   [ref]

Utilizing pam_faillock.so, the fail_interval directive configures the system to lock out an account after a number of incorrect login attempts within a specified time period. Ensure that the file /etc/security/faillock.conf contains the following entry: fail_interval = <interval-in-seconds> where interval-in-seconds is 900 or greater. In order to avoid errors when manually editing these files, it is recommended to use the appropriate tools, such as authselect or authconfig, depending on the OS version.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. If the system supports the /etc/security/faillock.conf file, the pam_faillock parameters should be defined in faillock.conf file.
Rationale:
By limiting the number of failed logon attempts the risk of unauthorized system access via user password guessing, otherwise known as brute-forcing, is reduced. Limits are imposed by locking the account.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_interval
References:
cis-csc1, 12, 15, 16
cobit5DSS05.04, DSS05.10, DSS06.10
disaCCI-000044, CCI-002236, CCI-002237, CCI-002238
isa-62443-20094.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nistCM-6(a), AC-7(a)
nist-csfPR.AC-7
osppFIA_AFL.1
os-srgSRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005
anssiR31

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Check if system relies
    on authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Remediation where authselect
    tool is present
  block:

  - name: Set Interval For Counting Failed Password Attempts - Check integrity of
      authselect current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Set Interval For Counting Failed Password Attempts - Informative message
      based on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Set Interval For Counting Failed Password Attempts - Get authselect current
      features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Set Interval For Counting Failed Password Attempts - Ensure "with-faillock"
      feature is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-faillock
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-faillock")

  - name: Set Interval For Counting Failed Password Attempts - Ensure authselect changes
      are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Remediation where authselect
    tool is not present
  block:

  - name: Set Interval For Counting Failed Password Attempts - Check if pam_faillock.so
      is already enabled
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail)
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_is_enabled

  - name: Set Interval For Counting Failed Password Attempts - Enable pam_faillock.so
      preauth editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so preauth
      insertbefore: ^auth.*sufficient.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Set Interval For Counting Failed Password Attempts - Enable pam_faillock.so
      authfail editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so authfail
      insertbefore: ^auth.*required.*pam_deny\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Set Interval For Counting Failed Password Attempts - Enable pam_faillock.so
      account section editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: account     required      pam_faillock.so
      insertbefore: ^account.*required.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_authselect_present.stat.exists
  tags:
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_fail_interval # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_fail_interval: !!str 900
  tags:
    - always

- name: Set Interval For Counting Failed Password Attempts - Check the presence of
    /etc/security/faillock.conf file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Ensure the pam_faillock.so
    fail_interval parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*fail_interval\s*=
    line: fail_interval = {{ var_accounts_passwords_pam_faillock_fail_interval }}
    state: present
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Ensure the pam_faillock.so
    fail_interval parameter not in PAM files
  block:

  - name: Set Interval For Counting Failed Password Attempts - Check if /etc/pam.d/system-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/system-auth
    register: result_pam_file_present

  - name: Set Interval For Counting Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Set Interval For Counting Failed Password Attempts - Define the PAM file
        to be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/system-auth

    - name: Set Interval For Counting Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
        custom profile is used if authselect is present
      block:

      - name: Set Interval For Counting Failed Password Attempts - Check integrity
          of authselect current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Set Interval For Counting Failed Password Attempts - Informative message
          based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Set Interval For Counting Failed Password Attempts - Get authselect
          current profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Set Interval For Counting Failed Password Attempts - Define the current
          authselect profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Define the new
          authselect custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Get authselect
          current features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Check if any custom
          profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Interval For Counting Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Interval For Counting Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Set Interval For Counting Failed Password Attempts - Change the PAM
          file to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Set Interval For Counting Failed Password Attempts - Ensure the "fail_interval"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bfail_interval\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists

  - name: Set Interval For Counting Failed Password Attempts - Check if /etc/pam.d/password-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/password-auth
    register: result_pam_file_present

  - name: Set Interval For Counting Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Set Interval For Counting Failed Password Attempts - Define the PAM file
        to be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/password-auth

    - name: Set Interval For Counting Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
        custom profile is used if authselect is present
      block:

      - name: Set Interval For Counting Failed Password Attempts - Check integrity
          of authselect current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Set Interval For Counting Failed Password Attempts - Informative message
          based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Set Interval For Counting Failed Password Attempts - Get authselect
          current profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Set Interval For Counting Failed Password Attempts - Define the current
          authselect profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Define the new
          authselect custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Get authselect
          current features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Check if any custom
          profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Interval For Counting Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Interval For Counting Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Set Interval For Counting Failed Password Attempts - Change the PAM
          file to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Set Interval For Counting Failed Password Attempts - Ensure the "fail_interval"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bfail_interval\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Ensure the pam_faillock.so
    fail_interval parameter in PAM files
  block:

  - name: Set Interval For Counting Failed Password Attempts - Check if pam_faillock.so
      fail_interval parameter is already enabled in pam files
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail).*fail_interval
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_fail_interval_parameter_is_present

  - name: Set Interval For Counting Failed Password Attempts - Ensure the inclusion
      of pam_faillock.so preauth fail_interval parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
      line: \1required\3 fail_interval={{ var_accounts_passwords_pam_faillock_fail_interval
        }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_fail_interval_parameter_is_present.found == 0

  - name: Set Interval For Counting Failed Password Attempts - Ensure the inclusion
      of pam_faillock.so authfail fail_interval parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
      line: \1required\3 fail_interval={{ var_accounts_passwords_pam_faillock_fail_interval
        }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_fail_interval_parameter_is_present.found == 0

  - name: Set Interval For Counting Failed Password Attempts - Ensure the desired
      value for pam_faillock.so preauth fail_interval parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)(fail_interval)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_fail_interval }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_fail_interval_parameter_is_present.found > 0

  - name: Set Interval For Counting Failed Password Attempts - Ensure the desired
      value for pam_faillock.so authfail fail_interval parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)(fail_interval)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_fail_interval }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_fail_interval_parameter_is_present.found > 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_faillock_conf_check.stat.exists
  tags:
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_faillock_fail_interval='900'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*fail_interval\s*="
    line="fail_interval = $var_accounts_passwords_pam_faillock_fail_interval"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(fail_interval\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_fail_interval"'|g' $FAILLOCK_CONF
    fi
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP '^\s*auth\s.*\bpam_faillock.so\s.*\bfail_interval\b' "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks 's/(.*auth.*pam_faillock.so.*)\bfail_interval\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so (preauth|authfail).*fail_interval' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*silent.*/ s/$/ fail_interval='"$var_accounts_passwords_pam_faillock_fail_interval"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ fail_interval='"$var_accounts_passwords_pam_faillock_fail_interval"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*silent.*\)\('"fail_interval"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_fail_interval"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"fail_interval"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_fail_interval"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set Lockout Time for Failed Password Attempts   [ref]

This rule configures the system to lock out accounts during a specified time period after a number of incorrect login attempts using pam_faillock.so. Ensure that the file /etc/security/faillock.conf contains the following entry: unlock_time=<interval-in-seconds> where interval-in-seconds is 0 or greater. pam_faillock.so module requires multiple entries in pam files. These entries must be carefully defined to work as expected. In order to avoid any errors when manually editing these files, it is recommended to use the appropriate tools, such as authselect or authconfig, depending on the OS version. If unlock_time is set to 0, manual intervention by an administrator is required to unlock a user. This should be done using the faillock tool.
Warning:  If the system supports the new /etc/security/faillock.conf file but the pam_faillock.so parameters are defined directly in /etc/pam.d/system-auth and /etc/pam.d/password-auth, the remediation will migrate the unlock_time parameter to /etc/security/faillock.conf to ensure compatibility with authselect tool. The parameters deny and fail_interval, if used, also have to be migrated by their respective remediation.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. If the system supports the /etc/security/faillock.conf file, the pam_faillock parameters should be defined in faillock.conf file.
Rationale:
By limiting the number of failed logon attempts the risk of unauthorized system access via user password guessing, otherwise known as brute-forcing, is reduced. Limits are imposed by locking the account.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_unlock_time
References:
cis-csc1, 12, 15, 16
cjis5.5.3
cobit5DSS05.04, DSS05.10, DSS06.10
cui3.1.8
disaCCI-000044, CCI-002236, CCI-002237, CCI-002238
isa-62443-20094.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nistCM-6(a), AC-7(b)
nist-csfPR.AC-7
osppFIA_AFL.1
pcidssReq-8.1.7
os-srgSRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005
anssiR31
cis5.3.3.1.2
pcidss48.3.4

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Check if system relies on
    authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Remediation where authselect
    tool is present
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check integrity of authselect
      current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Set Lockout Time for Failed Password Attempts - Informative message based
      on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Set Lockout Time for Failed Password Attempts - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Set Lockout Time for Failed Password Attempts - Ensure "with-faillock" feature
      is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-faillock
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-faillock")

  - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
      are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Remediation where authselect
    tool is not present
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check if pam_faillock.so
      is already enabled
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail)
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_is_enabled

  - name: Set Lockout Time for Failed Password Attempts - Enable pam_faillock.so preauth
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so preauth
      insertbefore: ^auth.*sufficient.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Enable pam_faillock.so authfail
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so authfail
      insertbefore: ^auth.*required.*pam_deny\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Enable pam_faillock.so account
      section editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: account     required      pam_faillock.so
      insertbefore: ^account.*required.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_authselect_present.stat.exists
  tags:
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_unlock_time # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_unlock_time: !!str 0
  tags:
    - always

- name: Set Lockout Time for Failed Password Attempts - Check the presence of /etc/security/faillock.conf
    file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Ensure the pam_faillock.so
    unlock_time parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*unlock_time\s*=
    line: unlock_time = {{ var_accounts_passwords_pam_faillock_unlock_time }}
    state: present
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Ensure the pam_faillock.so
    unlock_time parameter not in PAM files
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check if /etc/pam.d/system-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/system-auth
    register: result_pam_file_present

  - name: Set Lockout Time for Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Set Lockout Time for Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/system-auth

    - name: Set Lockout Time for Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Set Lockout Time for Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Set Lockout Time for Failed Password Attempts - Informative message
          based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Set Lockout Time for Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Check if any custom
          profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Change the PAM file
          to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Set Lockout Time for Failed Password Attempts - Ensure the "unlock_time"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bunlock_time\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists

  - name: Set Lockout Time for Failed Password Attempts - Check if /etc/pam.d/password-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/password-auth
    register: result_pam_file_present

  - name: Set Lockout Time for Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Set Lockout Time for Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/password-auth

    - name: Set Lockout Time for Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Set Lockout Time for Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Set Lockout Time for Failed Password Attempts - Informative message
          based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Set Lockout Time for Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Check if any custom
          profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Change the PAM file
          to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Set Lockout Time for Failed Password Attempts - Ensure the "unlock_time"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bunlock_time\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Ensure the pam_faillock.so
    unlock_time parameter in PAM files
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check if pam_faillock.so
      unlock_time parameter is already enabled in pam files
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail).*unlock_time
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_unlock_time_parameter_is_present

  - name: Set Lockout Time for Failed Password Attempts - Ensure the inclusion of
      pam_faillock.so preauth unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
      line: \1required\3 unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
        }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Ensure the inclusion of
      pam_faillock.so authfail unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
      line: \1required\3 unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
        }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Ensure the desired value
      for pam_faillock.so preauth unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)(unlock_time)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_unlock_time }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found > 0

  - name: Set Lockout Time for Failed Password Attempts - Ensure the desired value
      for pam_faillock.so authfail unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)(unlock_time)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_unlock_time }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found > 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_faillock_conf_check.stat.exists
  tags:
  - CJIS-5.5.3
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_faillock_unlock_time='0'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*unlock_time\s*="
    line="unlock_time = $var_accounts_passwords_pam_faillock_unlock_time"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(unlock_time\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_unlock_time"'|g' $FAILLOCK_CONF
    fi
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP '^\s*auth\s.*\bpam_faillock.so\s.*\bunlock_time\b' "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks 's/(.*auth.*pam_faillock.so.*)\bunlock_time\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so (preauth|authfail).*unlock_time' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*silent.*/ s/$/ unlock_time='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ unlock_time='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*silent.*\)\('"unlock_time"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"unlock_time"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Configure the root Account lock for Failed Password Attempts via pam_tally2   [ref]

This rule configures the system to lock out the root account after a number of incorrect login attempts using pam_tally2.so.
Rationale:
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, also known as brute-forcing, is reduced. Limits are imposed by locking the account.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_tally2_deny_root
References:
cis-csc1, 12, 15, 16
cobit5DSS05.04, DSS05.10, DSS06.10
disaCCI-002238, CCI-000044
isa-62443-20094.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nistCM-6(a), AC-7(b), IA-5(c)
nist-csfPR.AC-7
osppFMT_MOF_EXT.1
os-srgSRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005
anssiR31

Rule   Set Lockout Time for Failed Password Attempts using pam_tally2   [ref]

This rule configures the system to lock out accounts during a specified time period after a number of incorrect login attempts using pam_tally2.so.
Rationale:
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, also known as brute-forcing, is reduced. Limits are imposed by locking the account.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_tally2_unlock_time
References:
cis-csc1, 12, 15, 16
cobit5DSS05.04, DSS05.10, DSS06.10
disaCCI-002238, CCI-000044
isa-62443-20094.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nistCM-6(a), AC-7(b), IA-5(c)
nist-csfPR.AC-7
osppFMT_MOF_EXT.1
pcidssReq-8.1.7
os-srgSRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005
anssiR31
pcidss48.3.4
Group   Set Password Quality Requirements   Group contains 1 group and 6 rules
[ref]   The default pam_pwquality PAM module provides strength checking for passwords. It performs a number of checks, such as making sure passwords are not similar to dictionary words, are of at least a certain length, are not the previous password reversed, and are not simply a change of case from the previous password. It can also require passwords to be in certain character classes. The pam_pwquality module is the preferred way of configuring password requirements.

The man pages pam_pwquality(8) provide information on the capabilities and configuration of each.
Group   Set Password Quality Requirements with pam_pwquality   Group contains 6 rules
[ref]   The pam_pwquality PAM module can be configured to meet requirements for a variety of policies.

For example, to configure pam_pwquality to require at least one uppercase character, lowercase character, digit, and other (special) character, make sure that pam_pwquality exists in /etc/pam.d/system-auth:
password    requisite     pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=
If no such line exists, add one as the first line of the password section in /etc/pam.d/system-auth. Next, modify the settings in /etc/security/pwquality.conf to match the following:
difok = 4
minlen = 14
dcredit = -1
ucredit = -1
lcredit = -1
ocredit = -1
maxrepeat = 3
The arguments can be modified to ensure compliance with your organization's security policy. Discussion of each parameter follows.

Rule   Ensure PAM Enforces Password Requirements - Minimum Digit Characters   [ref]

The pam_pwquality module's dcredit parameter controls requirements for usage of digits in a password. When set to a negative number, any password will be required to contain that many digits. When set to a positive number, pam_pwquality will grant +1 additional length credit for each digit. Modify the dcredit setting in /etc/security/pwquality.conf to require the use of a digit in passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised. Requiring digits makes password guessing attacks more difficult by ensuring a larger search space.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_dcredit
References:
cis-csc1, 12, 15, 16, 5
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-000194
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(a), CM-6(a), IA-5(4)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
osppFMT_SMF_EXT.1
pcidssReq-8.2.3
os-srgSRG-OS-000071-GPOS-00039
anssiR31
pcidss48.3.6

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_dcredit # promote to variable
  set_fact:
    var_password_pam_dcredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters - Ensure
    PAM variable dcredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*dcredit
    line: dcredit = {{ var_password_pam_dcredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_dcredit='-1'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^dcredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_dcredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^dcredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^dcredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters   [ref]

The pam_pwquality module's lcredit parameter controls requirements for usage of lowercase letters in a password. When set to a negative number, any password will be required to contain that many lowercase characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each lowercase character. Modify the lcredit setting in /etc/security/pwquality.conf to require the use of a lowercase character in passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.
Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possble combinations that need to be tested before the password is compromised. Requiring a minimum number of lowercase characters makes password guessing attacks more difficult by ensuring a larger search space.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_lcredit
References:
cis-csc1, 12, 15, 16, 5
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-000193
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(a), CM-6(a), IA-5(4)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
osppFMT_SMF_EXT.1
pcidssReq-8.2.3
os-srgSRG-OS-000070-GPOS-00038
anssiR31
pcidss48.3.6

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_lcredit # promote to variable
  set_fact:
    var_password_pam_lcredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters -
    Ensure PAM variable lcredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*lcredit
    line: lcredit = {{ var_password_pam_lcredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_lcredit='-1'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^lcredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_lcredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^lcredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^lcredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Different Categories   [ref]

The pam_pwquality module's minclass parameter controls requirements for usage of different character classes, or types, of character that must exist in a password before it is considered valid. For example, setting this value to three (3) requires that any password must have characters from at least three different categories in order to be approved. The default value is zero (0), meaning there are no required classes. There are four categories available:
* Upper-case characters
* Lower-case characters
* Digits
* Special characters (for example, punctuation)
Modify the minclass setting in /etc/security/pwquality.conf entry to require 3 differing categories of characters when changing passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.

Requiring a minimum number of character categories makes password guessing attacks more difficult by ensuring a larger search space.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_minclass
References:
cis-csc1, 12, 15, 16, 5
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-000195
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(a), CM-6(a), IA-5(4)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
os-srgSRG-OS-000072-GPOS-00040
anssiR68
cis5.3.3.2.3

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_minclass
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_minclass # promote to variable
  set_fact:
    var_password_pam_minclass: !!str 3
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Different Categories -
    Ensure PAM variable minclass is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*minclass
    line: minclass = {{ var_password_pam_minclass }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_minclass
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_minclass='3'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^minclass")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_minclass"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^minclass\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^minclass\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Length   [ref]

The pam_pwquality module's minlen parameter controls requirements for minimum characters required in a password. Add minlen=14 after pam_pwquality to set minimum password length requirements.
Rationale:
The shorter the password, the lower the number of possible combinations that need to be tested before the password is compromised.
Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password length is one factor of several that helps to determine strength and how long it takes to crack a password. Use of more characters in a password helps to exponentially increase the time and/or resources required to compromise the password.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_minlen
References:
cis-csc1, 12, 15, 16, 5
cjis5.6.2.1.1
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-000205
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(a), CM-6(a), IA-5(4)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
osppFMT_SMF_EXT.1
pcidssReq-8.2.3
os-srgSRG-OS-000078-GPOS-00046
anssiR31, R68
cis5.3.3.2.2
pcidss48.3.6

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.6.2.1.1
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_minlen # promote to variable
  set_fact:
    var_password_pam_minlen: !!str 14
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Length - Ensure PAM variable
    minlen is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*minlen
    line: minlen = {{ var_password_pam_minlen }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CJIS-5.6.2.1.1
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_minlen='14'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^minlen")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_minlen"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^minlen\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^minlen\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Special Characters   [ref]

The pam_pwquality module's ocredit= parameter controls requirements for usage of special (or "other") characters in a password. When set to a negative number, any password will be required to contain that many special characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each special character. Modify the ocredit setting in /etc/security/pwquality.conf to equal -1 to require use of a special character in passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised. Requiring a minimum number of special characters makes password guessing attacks more difficult by ensuring a larger search space.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_ocredit
References:
cis-csc1, 12, 15, 16, 5
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-001619
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(a), CM-6(a), IA-5(4)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
osppFMT_SMF_EXT.1
os-srgSRG-OS-000266-GPOS-00101
anssiR31

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_ocredit # promote to variable
  set_fact:
    var_password_pam_ocredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Special Characters - Ensure
    PAM variable ocredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*ocredit
    line: ocredit = {{ var_password_pam_ocredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_ocredit='-1'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ocredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_ocredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ocredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^ocredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters   [ref]

The pam_pwquality module's ucredit= parameter controls requirements for usage of uppercase letters in a password. When set to a negative number, any password will be required to contain that many uppercase characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each uppercase character. Modify the ucredit setting in /etc/security/pwquality.conf to require the use of an uppercase character in passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_ucredit
References:
cis-csc1, 12, 15, 16, 5
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-000192, CCI-000193
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(a), CM-6(a), IA-5(4)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
osppFMT_SMF_EXT.1
pcidssReq-8.2.3
os-srgSRG-OS-000069-GPOS-00037, SRG-OS-000070-GPOS-00038
anssiR31

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_ucredit # promote to variable
  set_fact:
    var_password_pam_ucredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters -
    Ensure PAM variable ucredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*ucredit
    line: ucredit = {{ var_password_pam_ucredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_ucredit='-1'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ucredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_ucredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ucredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^ucredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Set Password Hashing Algorithm   Group contains 4 rules
[ref]   The system's default algorithm for storing password hashes in /etc/shadow is SHA-512. This can be configured in several locations.

Rule   Set Password Hashing Algorithm in /etc/libuser.conf   [ref]

In /etc/libuser.conf, add or correct the following line in its [defaults] section to ensure the system will use the SHA-512 algorithm for password hashing:
crypt_style = sha512
Rationale:
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kepy in plain text.

This setting ensures user and group account administration utilities are configured to store only encrypted representations of passwords. Additionally, the crypt_style configuration option ensures the use of a strong hashing algorithm that makes password cracking attacks more difficult.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_libuserconf
References:
cis-csc1, 12, 15, 16, 5
cjis5.6.2.2
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui3.13.11
disaCCI-000196
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism0418, 1055, 1402
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(c), CM-6(a)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
pcidssReq-8.2.1
os-srgSRG-OS-000073-GPOS-00041
cis5.4.1.4
pcidss48.3.2

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.6.2.2
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_libuserconf

- name: Set Password Hashing Algorithm in /etc/libuser.conf
  lineinfile:
    dest: /etc/libuser.conf
    insertafter: ^\s*\[defaults]
    regexp: ^#?crypt_style
    line: crypt_style = sha512
    state: present
    create: true
  when: '"libuser" in ansible_facts.packages'
  tags:
  - CJIS-5.6.2.2
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_libuserconf

# Remediation is applicable only in certain platforms
if rpm --quiet -q libuser; then

LIBUSER_CONF="/etc/libuser.conf"
CRYPT_STYLE_REGEX='[[:space:]]*\[defaults](.*(\n)+)+?[[:space:]]*crypt_style[[:space:]]*'

# Try find crypt_style in [defaults] section. If it is here, then change algorithm to sha512.
# If it isn't here, then add it to [defaults] section.
if grep -qzosP $CRYPT_STYLE_REGEX $LIBUSER_CONF ; then
        sed -i "s/\(crypt_style[[:space:]]*=[[:space:]]*\).*/\1sha512/g" $LIBUSER_CONF
elif grep -qs "\[defaults]" $LIBUSER_CONF ; then
        sed -i "/[[:space:]]*\[defaults]/a crypt_style = sha512" $LIBUSER_CONF
else
        echo -e "[defaults]\ncrypt_style = sha512" >> $LIBUSER_CONF
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set Password Hashing Algorithm in /etc/login.defs   [ref]

In /etc/login.defs, add or correct the following line to ensure the system will use SHA512 as the hashing algorithm:
ENCRYPT_METHOD SHA512
         
Rationale:
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kept in plain text.

Using a stronger hashing algorithm makes password cracking attacks more difficult.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_logindefs
References:
cis-csc1, 12, 15, 16, 5
cjis5.6.2.2
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui3.13.11
disaCCI-000196
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism0418, 1055, 1402
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(c), CM-6(a)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
pcidssReq-8.2.1
os-srgSRG-OS-000073-GPOS-00041
cis5.4.1.4
pcidss48.3.2

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.6.2.2
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_logindefs
- name: XCCDF Value var_password_hashing_algorithm # promote to variable
  set_fact:
    var_password_hashing_algorithm: !!str SHA512
  tags:
    - always

- name: Set Password Hashing Algorithm in /etc/login.defs
  lineinfile:
    dest: /etc/login.defs
    regexp: ^#?ENCRYPT_METHOD
    line: ENCRYPT_METHOD {{ var_password_hashing_algorithm }}
    state: present
    create: true
  when: '"shadow-utils" in ansible_facts.packages'
  tags:
  - CJIS-5.6.2.2
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_logindefs

# Remediation is applicable only in certain platforms
if rpm --quiet -q shadow-utils; then

var_password_hashing_algorithm='SHA512'

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ENCRYPT_METHOD")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$var_password_hashing_algorithm"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ENCRYPT_METHOD\\>" "/etc/login.defs"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^ENCRYPT_METHOD\\>.*/$escaped_formatted_output/gi" "/etc/login.defs"
else
    if [[ -s "/etc/login.defs" ]] && [[ -n "$(tail -c 1 -- "/etc/login.defs" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/login.defs"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/login.defs"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set PAM''s Password Hashing Algorithm - password-auth   [ref]

The PAM system service can be configured to only store encrypted representations of passwords. In /etc/pam.d/password-auth, the password section of the file controls which PAM modules execute during a password change. Set the pam_unix.so module in the password section to include the argument sha512, as shown below:
password    sufficient    pam_unix.so sha512 other arguments...
         

This will help ensure when local users change their passwords, hashes for the new passwords will be generated using the SHA-512 algorithm. This is the default.
Rationale:
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kepy in plain text.

This setting ensures user and group account administration utilities are configured to store only encrypted representations of passwords. Additionally, the crypt_style configuration option ensures the use of a strong hashing algorithm that makes password cracking attacks more difficult.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_passwordauth
References:
cis-csc1, 12, 15, 16, 5
cjis5.6.2.2
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui3.13.11
disaCCI-000196, CCI-000803
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism0418, 1055, 1402
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(c), CM-6(a)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
pcidssReq-8.2.1
os-srgSRG-OS-000073-GPOS-00041, SRG-OS-000120-GPOS-00061
cis5.3.3.4.3

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.6.2.2
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - set_password_hashing_algorithm_passwordauth

- name: Set PAM's Password Hashing Algorithm - password-auth - Check if /etc/pam.d/password-auth
    file is present
  ansible.builtin.stat:
    path: /etc/pam.d/password-auth
  register: result_pam_file_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CJIS-5.6.2.2
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - set_password_hashing_algorithm_passwordauth

- name: Set PAM's Password Hashing Algorithm - password-auth - Check the proper remediation
    for the system
  block:

  - name: Set PAM's Password Hashing Algorithm - password-auth - Define the PAM file
      to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/password-auth

  - name: Set PAM's Password Hashing Algorithm - password-auth - Check if system relies
      on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Set PAM's Password Hashing Algorithm - password-auth - Ensure authselect
      custom profile is used if authselect is present
    block:

    - name: Set PAM's Password Hashing Algorithm - password-auth - Check integrity
        of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Set PAM's Password Hashing Algorithm - password-auth - Informative message
        based on the authselect integrity check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Set PAM's Password Hashing Algorithm - password-auth - Get authselect
        current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Set PAM's Password Hashing Algorithm - password-auth - Define the current
        authselect profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Set PAM's Password Hashing Algorithm - password-auth - Define the new
        authselect custom profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Set PAM's Password Hashing Algorithm - password-auth - Get authselect
        current features to also enable them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Set PAM's Password Hashing Algorithm - password-auth - Check if any custom
        profile with the same name was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Set PAM's Password Hashing Algorithm - password-auth - Create an authselect
        custom profile based on the current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Set PAM's Password Hashing Algorithm - password-auth - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Set PAM's Password Hashing Algorithm - password-auth - Ensure the authselect
        custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Set PAM's Password Hashing Algorithm - password-auth - Restore the authselect
        features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Set PAM's Password Hashing Algorithm - password-auth - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Set PAM's Password Hashing Algorithm - password-auth - Change the PAM
        file to be edited according to the custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Set PAM's Password Hashing Algorithm - password-auth - Check if expected
      PAM module line is present in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ 'sufficient' | regex_escape() }}\s+pam_unix.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: Set PAM's Password Hashing Algorithm - password-auth - Include or update
      the PAM module line in {{ pam_file_path }}
    block:

    - name: Set PAM's Password Hashing Algorithm - password-auth - Check if required
        PAM module line is present in {{ pam_file_path }} with different control
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_unix.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: Set PAM's Password Hashing Algorithm - password-auth - Ensure the correct
        control for the required PAM module line in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_unix.so.*)
        replace: \1sufficient \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: Set PAM's Password Hashing Algorithm - password-auth - Ensure the required
        PAM module line is included in {{ pam_file_path }}
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        line: password    sufficient    pam_unix.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: Set PAM's Password Hashing Algorithm - password-auth - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0

  - name: Set PAM's Password Hashing Algorithm - password-auth - Check if the required
      PAM module option is present in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ 'sufficient' | regex_escape() }}\s+pam_unix.so\s*.*\ssha512\b
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_module_sha512_option_present

  - name: Set PAM's Password Hashing Algorithm - password-auth - Ensure the "sha512"
      PAM option for "pam_unix.so" is included in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+{{ 'sufficient' | regex_escape() }}\s+pam_unix.so.*)
      line: \1 sha512
      state: present
    register: result_pam_sha512_add
    when:
    - result_pam_module_sha512_option_present.found == 0

  - name: Set PAM's Password Hashing Algorithm - password-auth - Ensure authselect
      changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - |-
      (result_pam_sha512_add is defined and result_pam_sha512_add.changed)
       or (result_pam_sha512_edit is defined and result_pam_sha512_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_file_present.stat.exists
  tags:
  - CJIS-5.6.2.2
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - set_password_hashing_algorithm_passwordauth

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    if ! grep -qP '^\s*password\s+'"sufficient"'\s+pam_unix.so\s*.*' "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_unix.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_unix.so.*)/\1'"sufficient"' \2/' "$PAM_FILE_PATH"
            else
                echo 'password    '"sufficient"'    pam_unix.so' >> "$PAM_FILE_PATH"
            fi
        fi
        # Check the option
        if ! grep -qP '^\s*password\s+'"sufficient"'\s+pam_unix.so\s*.*\ssha512\b' "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks '/\s*password\s+'"sufficient"'\s+pam_unix.so.*/ s/$/ sha512/' "$PAM_FILE_PATH"
        fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set PAM''s Password Hashing Algorithm   [ref]

The PAM system service can be configured to only store encrypted representations of passwords. In "/etc/pam.d/system-auth", the password section of the file controls which PAM modules execute during a password change. Set the pam_unix.so module in the password section to include the argument sha512, as shown below:
password    sufficient    pam_unix.so sha512 other arguments...
         

This will help ensure when local users change their passwords, hashes for the new passwords will be generated using the SHA-512 algorithm. This is the default.
Rationale:
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kepy in plain text.

This setting ensures user and group account administration utilities are configured to store only encrypted representations of passwords. Additionally, the crypt_style configuration option ensures the use of a strong hashing algorithm that makes password cracking attacks more difficult.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_systemauth
References:
cis-csc1, 12, 15, 16, 5
cjis5.6.2.2
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui3.13.11
disaCCI-000196, CCI-000803
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism0418, 1055, 1402
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(c), CM-6(a)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
pcidssReq-8.2.1
os-srgSRG-OS-000073-GPOS-00041, SRG-OS-000120-GPOS-00061
anssiR68
cis5.3.3.4.3
pcidss48.3.2

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.6.2.2
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - set_password_hashing_algorithm_systemauth

- name: Set PAM's Password Hashing Algorithm - Check if /etc/pam.d/system-auth file
    is present
  ansible.builtin.stat:
    path: /etc/pam.d/system-auth
  register: result_pam_file_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CJIS-5.6.2.2
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - set_password_hashing_algorithm_systemauth

- name: Set PAM's Password Hashing Algorithm - Check the proper remediation for the
    system
  block:

  - name: Set PAM's Password Hashing Algorithm - Define the PAM file to be edited
      as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: Set PAM's Password Hashing Algorithm - Check if system relies on authselect
      tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Set PAM's Password Hashing Algorithm - Ensure authselect custom profile
      is used if authselect is present
    block:

    - name: Set PAM's Password Hashing Algorithm - Check integrity of authselect current
        profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Set PAM's Password Hashing Algorithm - Informative message based on the
        authselect integrity check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Set PAM's Password Hashing Algorithm - Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Set PAM's Password Hashing Algorithm - Define the current authselect profile
        as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Set PAM's Password Hashing Algorithm - Define the new authselect custom
        profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Set PAM's Password Hashing Algorithm - Get authselect current features
        to also enable them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Set PAM's Password Hashing Algorithm - Check if any custom profile with
        the same name was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Set PAM's Password Hashing Algorithm - Create an authselect custom profile
        based on the current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Set PAM's Password Hashing Algorithm - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Set PAM's Password Hashing Algorithm - Ensure the authselect custom profile
        is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Set PAM's Password Hashing Algorithm - Restore the authselect features
        in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Set PAM's Password Hashing Algorithm - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Set PAM's Password Hashing Algorithm - Change the PAM file to be edited
        according to the custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Set PAM's Password Hashing Algorithm - Check if expected PAM module line
      is present in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ 'sufficient' | regex_escape() }}\s+pam_unix.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: Set PAM's Password Hashing Algorithm - Include or update the PAM module
      line in {{ pam_file_path }}
    block:

    - name: Set PAM's Password Hashing Algorithm - Check if required PAM module line
        is present in {{ pam_file_path }} with different control
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_unix.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: Set PAM's Password Hashing Algorithm - Ensure the correct control for
        the required PAM module line in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_unix.so.*)
        replace: \1sufficient \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: Set PAM's Password Hashing Algorithm - Ensure the required PAM module
        line is included in {{ pam_file_path }}
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        line: password    sufficient    pam_unix.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: Set PAM's Password Hashing Algorithm - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0

  - name: Set PAM's Password Hashing Algorithm - Check if the required PAM module
      option is present in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ 'sufficient' | regex_escape() }}\s+pam_unix.so\s*.*\ssha512\b
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_module_sha512_option_present

  - name: Set PAM's Password Hashing Algorithm - Ensure the "sha512" PAM option for
      "pam_unix.so" is included in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+{{ 'sufficient' | regex_escape() }}\s+pam_unix.so.*)
      line: \1 sha512
      state: present
    register: result_pam_sha512_add
    when:
    - result_pam_module_sha512_option_present.found == 0

  - name: Set PAM's Password Hashing Algorithm - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - |-
      (result_pam_sha512_add is defined and result_pam_sha512_add.changed)
       or (result_pam_sha512_edit is defined and result_pam_sha512_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_file_present.stat.exists
  tags:
  - CJIS-5.6.2.2
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - set_password_hashing_algorithm_systemauth

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    if ! grep -qP '^\s*password\s+'"sufficient"'\s+pam_unix.so\s*.*' "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_unix.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_unix.so.*)/\1'"sufficient"' \2/' "$PAM_FILE_PATH"
            else
                echo 'password    '"sufficient"'    pam_unix.so' >> "$PAM_FILE_PATH"
            fi
        fi
        # Check the option
        if ! grep -qP '^\s*password\s+'"sufficient"'\s+pam_unix.so\s*.*\ssha512\b' "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks '/\s*password\s+'"sufficient"'\s+pam_unix.so.*/ s/$/ sha512/' "$PAM_FILE_PATH"
        fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Protect Physical Console Access   Group contains 2 groups and 7 rules
[ref]   It is impossible to fully protect a system from an attacker with physical access, so securing the space in which the system is located should be considered a necessary step. However, there are some steps which, if taken, make it more difficult for an attacker to quickly or undetectably modify a system from its console.
Group   Configure Screen Locking   Group contains 1 group and 5 rules
[ref]   When a user must temporarily leave an account logged-in, screen locking should be employed to prevent passersby from abusing the account. User education and training is particularly important for screen locking to be effective, and policies can be implemented to reinforce this.

Automatic screen locking is only meant as a safeguard for those cases where a user forgot to lock the screen.
Group   Hardware Tokens for Authentication   Group contains 5 rules

Rule   Install the opensc Package For Multifactor Authentication   [ref]

The opensc package can be installed with the following command:
$ sudo dnf install opensc
Rationale:
Using an authentication device, such as a CAC or token that is separate from the information system, ensures that even if the information system is compromised, that compromise will not affect credentials stored on the authentication device.

Multifactor solutions that require devices separate from information systems gaining access include, for example, hardware tokens providing time-based or challenge-response authenticators and smart cards such as the U.S. Government Personal Identity Verification card and the DoD Common Access Card.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_opensc_installed
References:
disaCCI-001954, CCI-001953
ism1382, 1384, 1386
nistCM-6(a)
os-srgSRG-OS-000375-GPOS-00160, SRG-OS-000376-GPOS-00161


[[packages]]
name = "opensc"
version = "*"

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Ensure opensc is installed
  package:
    name: opensc
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_opensc_installed

Complexity:low
Disruption:low
Reboot:false
Strategy:enable

package --add=opensc

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include install_opensc

class install_opensc {
  package { 'opensc':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "opensc" ; then
    dnf install -y "opensc"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Install the pcsc-lite package   [ref]

The pcsc-lite package can be installed with the following command:
$ sudo dnf install pcsc-lite
Rationale:
The pcsc-lite package must be installed if it is to be available for multifactor authentication using smartcards.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_pcsc-lite_installed
References:
disaCCI-001954
ism1382, 1384, 1386
nistCM-6(a)
os-srgSRG-OS-000375-GPOS-00160


[[packages]]
name = "pcsc-lite"
version = "*"

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Ensure pcsc-lite is installed
  package:
    name: pcsc-lite
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_pcsc-lite_installed

Complexity:low
Disruption:low
Reboot:false
Strategy:enable

package --add=pcsc-lite

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include install_pcsc-lite

class install_pcsc-lite {
  package { 'pcsc-lite':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "pcsc-lite" ; then
    dnf install -y "pcsc-lite"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable the pcscd Service   [ref]

The pcscd service can be enabled with the following command:
$ sudo systemctl enable pcscd.service
Rationale:
Using an authentication device, such as a CAC or token that is separate from the information system, ensures that even if the information system is compromised, that compromise will not affect credentials stored on the authentication device.

Multifactor solutions that require devices separate from information systems gaining access include, for example, hardware tokens providing time-based or challenge-response authenticators and smart cards such as the U.S. Government Personal Identity Verification card and the DoD Common Access Card.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_service_pcscd_enabled
References:
disaCCI-001954
ism1382, 1384, 1386
nistIA-2(1), IA-2(2), IA-2(3), IA-2(4), IA-2(6), IA-2(7), IA-2(11), CM-6(a)
pcidssReq-8.3
os-srgSRG-OS-000375-GPOS-00160


[customizations.services]
enabled = ["pcscd"]

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Enable service pcscd
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Start service pcscd
    systemd:
      name: pcscd
      state: started
      masked: 'no'
    when:
    - '"pcsc-lite" in ansible_facts.packages'

  - name: Enable service pcscd
    ansible.builtin.command:
      cmd: systemctl enable pcscd
    when:
    - '"pcsc-lite" in ansible_facts.packages'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2(1)
  - NIST-800-53-IA-2(11)
  - NIST-800-53-IA-2(2)
  - NIST-800-53-IA-2(3)
  - NIST-800-53-IA-2(4)
  - NIST-800-53-IA-2(6)
  - NIST-800-53-IA-2(7)
  - PCI-DSS-Req-8.3
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_pcscd_enabled

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include enable_pcscd

class enable_pcscd {
  service {'pcscd':
    enable => true,
    ensure => 'running',
  }
}

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'pcscd.service'
"$SYSTEMCTL_EXEC" start 'pcscd.service'
"$SYSTEMCTL_EXEC" enable 'pcscd.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Configure opensc Smart Card Drivers   [ref]

The OpenSC smart card tool can auto-detect smart card drivers; however, setting the smart card drivers in use by your organization helps to prevent users from using unauthorized smart cards. The default smart card driver for this profile is default. To configure the OpenSC driver, edit the /etc/opensc.conf and add the following line into the file in the app default block, so it will look like:
app default {
   ...
   card_drivers = default;
}
Rationale:
Smart card login provides two-factor authentication stronger than that provided by a username and password combination. Smart cards leverage PKI (public key infrastructure) in order to provide and verify credentials. Configuring the smart card driver in use by your organization helps to prevent users from using unauthorized smart cards.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_configure_opensc_card_drivers
References:
cis-csc1, 12, 15, 16, 5
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-000765, CCI-000766, CCI-000767, CCI-000768, CCI-000771, CCI-000772, CCI-000884
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism1382, 1384, 1386
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-2(1), IA-2(2), IA-2(3), IA-2(4), IA-2(6), IA-2(7), IA-2(11), CM-6(a)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
pcidssReq-8.3
os-srgSRG-OS-000104-GPOS-00051, SRG-OS-000106-GPOS-00053, SRG-OS-000107-GPOS-00054, SRG-OS-000109-GPOS-00056, SRG-OS-000108-GPOS-00055, SRG-OS-000108-GPOS-00057, SRG-OS-000108-GPOS-00058

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: XCCDF Value var_smartcard_drivers # promote to variable
  set_fact:
    var_smartcard_drivers: !!str default
  tags:
    - always

- name: Check existence of opensc conf
  stat:
    path: /etc/opensc-{{ ansible_architecture }}.conf
  register: opensc_conf_cd
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2(1)
  - NIST-800-53-IA-2(11)
  - NIST-800-53-IA-2(2)
  - NIST-800-53-IA-2(3)
  - NIST-800-53-IA-2(4)
  - NIST-800-53-IA-2(6)
  - NIST-800-53-IA-2(7)
  - PCI-DSS-Req-8.3
  - configure_opensc_card_drivers
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Configure smartcard driver block
  block:

  - name: Check if card_drivers is defined
    command: /usr/bin/opensc-tool -G app:default:card_drivers
    changed_when: false
    register: card_drivers

  - name: Configure opensc Smart Card Drivers
    command: |
      /usr/bin/opensc-tool -S app:default:card_drivers:{{ var_smartcard_drivers }}
    when:
    - card_drivers.stdout != var_smartcard_drivers
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - opensc_conf_cd.stat.exists
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2(1)
  - NIST-800-53-IA-2(11)
  - NIST-800-53-IA-2(2)
  - NIST-800-53-IA-2(3)
  - NIST-800-53-IA-2(4)
  - NIST-800-53-IA-2(6)
  - NIST-800-53-IA-2(7)
  - PCI-DSS-Req-8.3
  - configure_opensc_card_drivers
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_smartcard_drivers='default'


OPENSC_TOOL="/usr/bin/opensc-tool"

if [ -f "${OPENSC_TOOL}" ]; then
    ${OPENSC_TOOL} -S app:default:card_drivers:$var_smartcard_drivers
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Force opensc To Use Defined Smart Card Driver   [ref]

The OpenSC smart card middleware can auto-detect smart card drivers; however by forcing the smart card driver in use by your organization, opensc will no longer autodetect or use other drivers unless specified. This helps to prevent users from using unauthorized smart cards. The default smart card driver for this profile is default. To force the OpenSC driver, edit the /etc/opensc.conf. Look for a line similar to:
# force_card_driver = customcos;
and change it to:
force_card_driver = default;
Rationale:
Smart card login provides two-factor authentication stronger than that provided by a username and password combination. Smart cards leverage PKI (public key infrastructure) in order to provide and verify credentials. Forcing the smart card driver in use by your organization helps to prevent users from using unauthorized smart cards.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_force_opensc_card_drivers
References:
cis-csc1, 12, 15, 16, 5
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-000765, CCI-000766, CCI-000767, CCI-000768, CCI-000771, CCI-000772, CCI-000884
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism1382, 1384, 1386
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-2(1), IA-2(2), IA-2(3), IA-2(4), IA-2(6), IA-2(7), IA-2(11), CM-6(a)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
pcidssReq-8.3
os-srgSRG-OS-000104-GPOS-00051, SRG-OS-000106-GPOS-00053, SRG-OS-000107-GPOS-00054, SRG-OS-000109-GPOS-00056, SRG-OS-000108-GPOS-00055, SRG-OS-000108-GPOS-00057, SRG-OS-000108-GPOS-00058

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: XCCDF Value var_smartcard_drivers # promote to variable
  set_fact:
    var_smartcard_drivers: !!str default
  tags:
    - always

- name: Check existence of opensc conf
  stat:
    path: /etc/opensc-{{ ansible_architecture }}.conf
  register: opensc_conf_fcd
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2(1)
  - NIST-800-53-IA-2(11)
  - NIST-800-53-IA-2(2)
  - NIST-800-53-IA-2(3)
  - NIST-800-53-IA-2(4)
  - NIST-800-53-IA-2(6)
  - NIST-800-53-IA-2(7)
  - PCI-DSS-Req-8.3
  - configure_strategy
  - force_opensc_card_drivers
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Force smartcard driver block
  block:

  - name: Check if force_card_driver is defined
    command: /usr/bin/opensc-tool -G app:default:force_card_driver
    changed_when: false
    register: force_card_driver

  - name: Force opensc To Use Defined Smart Card Driver
    command: |
      /usr/bin/opensc-tool -S app:default:force_card_driver:{{ var_smartcard_drivers }}
    when:
    - force_card_driver.stdout != var_smartcard_drivers
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - opensc_conf_fcd.stat.exists
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2(1)
  - NIST-800-53-IA-2(11)
  - NIST-800-53-IA-2(2)
  - NIST-800-53-IA-2(3)
  - NIST-800-53-IA-2(4)
  - NIST-800-53-IA-2(6)
  - NIST-800-53-IA-2(7)
  - PCI-DSS-Req-8.3
  - configure_strategy
  - force_opensc_card_drivers
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_smartcard_drivers='default'


OPENSC_TOOL="/usr/bin/opensc-tool"

if [ -f "${OPENSC_TOOL}" ]; then
    ${OPENSC_TOOL} -S app:default:force_card_driver:$var_smartcard_drivers
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Require Authentication for Emergency Systemd Target   [ref]

Emergency mode is intended as a system recovery method, providing a single user root access to the system during a failed boot sequence.

By default, Emergency mode is protected by requiring a password and is set in /usr/lib/systemd/system/emergency.service.
Rationale:
This prevents attackers with physical access from trivially bypassing security on the machine and gaining root access. Such accesses are further prevented by configuring the bootloader password.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_require_emergency_target_auth
References:
cis-csc1, 11, 12, 14, 15, 16, 18, 3, 5
cobit5DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10
cui3.1.1, 3.4.5
disaCCI-000213
hipaa164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nistIA-2, AC-3, CM-6(a)
nist-csfPR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3
osppFIA_UAU.1
os-srgSRG-OS-000080-GPOS-00048

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Require emergency mode password
  lineinfile:
    create: true
    dest: /usr/lib/systemd/system/emergency.service
    regexp: ^#?ExecStart=
    line: ExecStart=-/bin/sh -c "/sbin/sulogin; /usr/bin/systemctl --fail --no-block
      default"
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.1
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - require_emergency_target_auth
  - restrict_strategy

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

service_file="/usr/lib/systemd/system/emergency.service"


sulogin='/bin/sh -c "/sbin/sulogin; /usr/bin/systemctl --fail --no-block default"'


if grep "^ExecStart=.*" "$service_file" ; then
    sed -i "s%^ExecStart=.*%ExecStart=-$sulogin%" "$service_file"
else
    echo "ExecStart=-$sulogin" >> "$service_file"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Require Authentication for Single User Mode   [ref]

Single-user mode is intended as a system recovery method, providing a single user root access to the system by providing a boot option at startup.

By default, single-user mode is protected by requiring a password and is set in /usr/lib/systemd/system/rescue.service.
Rationale:
This prevents attackers with physical access from trivially bypassing security on the machine and gaining root access. Such accesses are further prevented by configuring the bootloader password.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_require_singleuser_auth
References:
cis-csc1, 11, 12, 14, 15, 16, 18, 3, 5
cobit5DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10
cui3.1.1, 3.4.5
disaCCI-000213
hipaa164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3
nistIA-2, AC-3, CM-6(a)
nist-csfPR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3
osppFIA_UAU.1
os-srgSRG-OS-000080-GPOS-00048

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Require single user mode password
  lineinfile:
    create: true
    dest: /usr/lib/systemd/system/rescue.service
    regexp: ^#?ExecStart=
    line: ExecStart=-/bin/sh -c "/sbin/sulogin; /usr/bin/systemctl --fail --no-block
      default"
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.1
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - require_singleuser_auth
  - restrict_strategy

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

service_file="/usr/lib/systemd/system/rescue.service"

sulogin='/bin/sh -c "/sbin/sulogin; /usr/bin/systemctl --fail --no-block default"'

if grep "^ExecStart=.*" "$service_file" ; then
    sed -i "s%^ExecStart=.*%ExecStart=-$sulogin%" "$service_file"
else
    echo "ExecStart=-$sulogin" >> "$service_file"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Protect Accounts by Restricting Password-Based Login   Group contains 3 groups and 7 rules
[ref]   Conventionally, Unix shell accounts are accessed by providing a username and password to a login program, which tests these values for correctness using the /etc/passwd and /etc/shadow files. Password-based login is vulnerable to guessing of weak passwords, and to sniffing and man-in-the-middle attacks against passwords entered over a network or at an insecure console. Therefore, mechanisms for accessing accounts by entering usernames and passwords should be restricted to those which are operationally necessary.
Group   Set Password Expiration Parameters   Group contains 4 rules
[ref]   The file /etc/login.defs controls several password-related settings. Programs such as passwd, su, and login consult /etc/login.defs to determine behavior with regard to password aging, expiration warnings, and length. See the man page login.defs(5) for more information.

Users should be forced to change their passwords, in order to decrease the utility of compromised passwords. However, the need to change passwords often should be balanced against the risk that users will reuse or write down passwords if forced to change them too often. Forcing password changes every 90-360 days, depending on the environment, is recommended. Set the appropriate value as PASS_MAX_DAYS and apply it to existing accounts with the -M flag.

The PASS_MIN_DAYS (-m) setting prevents password changes for 7 days after the first change, to discourage password cycling. If you use this setting, train users to contact an administrator for an emergency password change in case a new password becomes compromised. The PASS_WARN_AGE (-W) setting gives users 7 days of warnings at login time that their passwords are about to expire.

For example, for each existing human user USER, expiration parameters could be adjusted to a 180 day maximum password age, 7 day minimum password age, and 7 day warning period with the following command:
$ sudo chage -M 180 -m 7 -W 7 USER
Group   Verify Proper Storage and Existence of Password Hashes   Group contains 1 rule
[ref]   By default, password hashes for local accounts are stored in the second field (colon-separated) in /etc/shadow. This file should be readable only by processes running with root credentials, preventing users from casually accessing others' password hashes and attempting to crack them. However, it remains possible to misconfigure the system and store password hashes in world-readable files such as /etc/passwd, or to even store passwords themselves in plaintext on the system. Using system-provided tools for password change/creation should allow administrators to avoid such misconfiguration.

Rule   Prevent Login to Accounts With Empty Password   [ref]

If an account is configured for password authentication but does not have an assigned password, it may be possible to log into the account without authentication. Remove any instances of the nullok in /etc/pam.d/system-auth and /etc/pam.d/password-auth to prevent logins with empty passwords.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. Note that this rule is not applicable for systems running within a container. Having user with empty password within a container is not considered a risk, because it should not be possible to directly login into a container anyway.
Rationale:
If an account has an empty password, anyone could log in and run commands with the privileges of that account. Accounts with empty passwords should never be used in operational environments.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_no_empty_passwords
References:
cis-csc1, 12, 13, 14, 15, 16, 18, 3, 5
cjis5.5.2
cobit5APO01.06, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.10
cui3.1.1, 3.1.5
disaCCI-000366
hipaa164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 5.2
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nistIA-5(1)(a), IA-5(c), CM-6(a)
nist-csfPR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5
osppFIA_UAU.1
pcidssReq-8.2.3
os-srgSRG-OS-000480-GPOS-00227
cis5.3.3.4.1
pcidss48.3.1

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Prevent Login to Accounts With Empty Password - Check if system relies on
    authselect
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.2
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.1
  - configure_strategy
  - high_severity
  - low_complexity
  - medium_disruption
  - no_empty_passwords
  - no_reboot_needed

- name: Prevent Login to Accounts With Empty Password - Remediate using authselect
  block:

  - name: Prevent Login to Accounts With Empty Password - Check integrity of authselect
      current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Prevent Login to Accounts With Empty Password - Informative message based
      on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Prevent Login to Accounts With Empty Password - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Prevent Login to Accounts With Empty Password - Ensure "without-nullok"
      feature is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature without-nullok
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("without-nullok")

  - name: Prevent Login to Accounts With Empty Password - Ensure authselect changes
      are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - result_authselect_present.stat.exists
  tags:
  - CJIS-5.5.2
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.1
  - configure_strategy
  - high_severity
  - low_complexity
  - medium_disruption
  - no_empty_passwords
  - no_reboot_needed

- name: Prevent Login to Accounts With Empty Password - Remediate directly editing
    PAM files
  ansible.builtin.replace:
    dest: '{{ item }}'
    regexp: nullok
  loop:
  - /etc/pam.d/system-auth
  - /etc/pam.d/password-auth
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - not result_authselect_present.stat.exists
  tags:
  - CJIS-5.5.2
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.1
  - configure_strategy
  - high_severity
  - low_complexity
  - medium_disruption
  - no_empty_passwords
  - no_reboot_needed

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%23%20Generated%20by%20authselect%20on%20Sat%20Oct%2027%2014%3A59%3A36%202018%0A%23%20Do%20not%20modify%20this%20file%20manually.%0A%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_env.so%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_faildelay.so%20delay%3D2000000%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_fprintd.so%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20try_first_pass%0Aauth%20%20%20%20%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet_success%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20forward_pass%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3C%201000%20quiet%0Aaccount%20%20%20%20%20%5Bdefault%3Dbad%20success%3Dok%20user_unknown%3Dignore%5D%20pam_sss.so%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_permit.so%0A%0Apassword%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_pwquality.so%20try_first_pass%20local_users_only%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20sha512%20shadow%20try_first_pass%20use_authtok%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20use_authtok%0Apassword%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_keyinit.so%20revoke%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_limits.so%0A-session%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_systemd.so%0Asession%20%20%20%20%20%5Bsuccess%3D1%20default%3Dignore%5D%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20service%20in%20crond%20quiet%20use_uid%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%0A
        mode: 0644
        path: /etc/pam.d/password-auth
        overwrite: true
      - contents:
          source: data:,%23%20Generated%20by%20authselect%20on%20Sat%20Oct%2027%2014%3A59%3A36%202018%0A%23%20Do%20not%20modify%20this%20file%20manually.%0A%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_env.so%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_faildelay.so%20delay%3D2000000%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_fprintd.so%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20try_first_pass%0Aauth%20%20%20%20%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet_success%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20forward_pass%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3C%201000%20quiet%0Aaccount%20%20%20%20%20%5Bdefault%3Dbad%20success%3Dok%20user_unknown%3Dignore%5D%20pam_sss.so%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_permit.so%0A%0Apassword%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_pwquality.so%20try_first_pass%20local_users_only%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20sha512%20shadow%20try_first_pass%20use_authtok%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20use_authtok%0Apassword%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_keyinit.so%20revoke%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_limits.so%0A-session%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_systemd.so%0Asession%20%20%20%20%20%5Bsuccess%3D1%20default%3Dignore%5D%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20service%20in%20crond%20quiet%20use_uid%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%0A
        mode: 0644
        path: /etc/pam.d/system-auth
        overwrite: true

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature without-nullok

authselect apply-changes -b
else
    
if grep -qP '^\s*auth\s+'"sufficient"'\s+pam_unix.so\s.*\bnullok\b' "/etc/pam.d/system-auth"; then
    sed -i -E --follow-symlinks 's/(.*auth.*'"sufficient"'.*pam_unix.so.*)\snullok=?[[:alnum:]]*(.*)/\1\2/g' "/etc/pam.d/system-auth"
fi
    
if grep -qP '^\s*password\s+'"sufficient"'\s+pam_unix.so\s.*\bnullok\b' "/etc/pam.d/system-auth"; then
    sed -i -E --follow-symlinks 's/(.*password.*'"sufficient"'.*pam_unix.so.*)\snullok=?[[:alnum:]]*(.*)/\1\2/g' "/etc/pam.d/system-auth"
fi
    
if grep -qP '^\s*auth\s+'"sufficient"'\s+pam_unix.so\s.*\bnullok\b' "/etc/pam.d/password-auth"; then
    sed -i -E --follow-symlinks 's/(.*auth.*'"sufficient"'.*pam_unix.so.*)\snullok=?[[:alnum:]]*(.*)/\1\2/g' "/etc/pam.d/password-auth"
fi
    
if grep -qP '^\s*password\s+'"sufficient"'\s+pam_unix.so\s.*\bnullok\b' "/etc/pam.d/password-auth"; then
    sed -i -E --follow-symlinks 's/(.*password.*'"sufficient"'.*pam_unix.so.*)\snullok=?[[:alnum:]]*(.*)/\1\2/g' "/etc/pam.d/password-auth"
fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Restrict Root Logins   Group contains 2 rules
[ref]   Direct root logins should be allowed only for emergency use. In normal situations, the administrator should access the system via a unique unprivileged account, and then use su or sudo to execute privileged commands. Discouraging administrators from accessing the root account directly ensures an audit trail in organizations with multiple administrators. Locking down the channels through which root can connect directly also reduces opportunities for password-guessing against the root account. The login program uses the file /etc/securetty to determine which interfaces should allow root logins. The virtual devices /dev/console and /dev/tty* represent the system consoles (accessible via the Ctrl-Alt-F1 through Ctrl-Alt-F6 keyboard sequences on a default installation). The default securetty file also contains /dev/vc/*. These are likely to be deprecated in most environments, but may be retained for compatibility. Root should also be prohibited from connecting via network protocols. Other sections of this document include guidance describing how to prevent root from logging in via SSH.

Rule   Verify Only Root Has UID 0   [ref]

If any account other than root has a UID of 0, this misconfiguration should be investigated and the accounts other than root should be removed or have their UID changed.
If the account is associated with system commands or applications the UID should be changed to one greater than "0" but less than "1000." Otherwise assign a UID greater than "1000" that has not already been assigned.
Rationale:
An account has root authority if it has a UID of 0. Multiple accounts with a UID of 0 afford more opportunity for potential intruders to guess a password for a privileged account. Proper configuration of sudo is recommended to afford multiple system administrators access to root privileges in an accountable manner.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_accounts_no_uid_except_zero
References:
cis-csc1, 12, 13, 14, 15, 16, 18, 3, 5
cobit5APO01.06, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.10
cui3.1.1, 3.1.5
disaCCI-000366
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 5.2
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3
nistIA-2, AC-6(5), IA-4(b)
nist-csfPR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5
pcidssReq-8.5
os-srgSRG-OS-000480-GPOS-00227
cis5.4.2.1
pcidss48.2.1

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Get all /etc/passwd file entries
  getent:
    database: passwd
    split: ':'
  tags:
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-AC-6(5)
  - NIST-800-53-IA-2
  - NIST-800-53-IA-4(b)
  - PCI-DSS-Req-8.5
  - PCI-DSSv4-8.2.1
  - accounts_no_uid_except_zero
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - restrict_strategy

- name: Lock the password of the user accounts other than root with uid 0
  command: passwd -l {{ item.key }}
  loop: '{{ getent_passwd | dict2items | rejectattr(''key'', ''search'', ''root'')
    | list }}'
  when: item.value.1  == '0'
  tags:
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-AC-6(5)
  - NIST-800-53-IA-2
  - NIST-800-53-IA-4(b)
  - PCI-DSS-Req-8.5
  - PCI-DSSv4-8.2.1
  - accounts_no_uid_except_zero
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - restrict_strategy

awk -F: '$3 == 0 && $1 != "root" { print $1 }' /etc/passwd | xargs --no-run-if-empty --max-lines=1 passwd -l

Rule   Ensure that System Accounts Do Not Run a Shell Upon Login   [ref]

Some accounts are not associated with a human user of the system, and exist to perform some administrative functions. Should an attacker be able to log into these accounts, they should not be granted access to a shell.

The login shell for each local account is stored in the last field of each line in /etc/passwd. System accounts are those user accounts with a user ID less than 1000. The user ID is stored in the third field. If any system account other than root has a login shell, disable it with the command:
$ sudo usermod -s /sbin/nologin account
         
Warning:  Do not perform the steps in this section on the root account. Doing so might cause the system to become inaccessible.
Rationale:
Ensuring shells are not given to system accounts upon login makes it more difficult for attackers to make use of system accounts.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_no_shelllogin_for_systemaccounts
References:
cis-csc1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8
cobit5DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS06.03
disaCCI-000366
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2
ism1491
iso27001-2013A.12.4.1, A.12.4.3, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nistAC-6, CM-6(a), CM-6(b), CM-6.1(iv)
nist-csfDE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6
os-srgSRG-OS-000480-GPOS-00227
cis5.4.2.7
pcidss48.2.2

Complexity:low
Disruption:medium
Reboot:false
Strategy:restrict
- name: Ensure that System Accounts Do Not Run a Shell Upon Login - Get All Local
    Users From /etc/passwd
  ansible.builtin.getent:
    database: passwd
    split: ':'
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSSv4-8.2.2
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - no_shelllogin_for_systemaccounts
  - restrict_strategy

- name: Ensure that System Accounts Do Not Run a Shell Upon Login - Create local_users
    Variable From getent_passwd Facts
  ansible.builtin.set_fact:
    local_users: '{{ ansible_facts.getent_passwd | dict2items }}'
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSSv4-8.2.2
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - no_shelllogin_for_systemaccounts
  - restrict_strategy

- name: Ensure that System Accounts Do Not Run a Shell Upon Login -  Disable Login
    Shell for System Accounts
  ansible.builtin.user:
    name: '{{ item.key }}'
    shell: /sbin/nologin
  loop: '{{ local_users }}'
  when:
  - item.key not in ['root']
  - item.value[1]|int < 1000
  - item.value[5] not in ['/sbin/shutdown', '/sbin/halt', '/bin/sync']
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSSv4-8.2.2
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - no_shelllogin_for_systemaccounts
  - restrict_strategy

Complexity:low
Disruption:medium
Reboot:false
Strategy:restrict

readarray -t systemaccounts < <(awk -F: '($3 < 1000 && $3 != root \
  && $7 != "\/sbin\/shutdown" && $7 != "\/sbin\/halt" && $7 != "\/bin\/sync") \
  { print $1 }' /etc/passwd)

for systemaccount in "${systemaccounts[@]}"; do
    usermod -s /sbin/nologin "$systemaccount"
done

Rule   Enable authselect   [ref]

Configure user authentication setup to use the authselect tool. If authselect profile is selected, the rule will enable the sssd profile.
Warning:  If the sudo authselect select command returns an error informing that the chosen profile cannot be selected, it is probably because PAM files have already been modified by the administrator. If this is the case, in order to not overwrite the desired changes made by the administrator, the current PAM settings should be investigated before forcing the selection of the chosen authselect profile.
Rationale:
Authselect is a successor to authconfig. It is a tool to select system authentication and identity sources from a list of supported profiles instead of letting the administrator manually build the PAM stack. That way, it avoids potential breakage of configuration, as it ships several tested profiles that are well tested and supported to solve different use-cases.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_enable_authselect
References:
disaCCI-000213
hipaa164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
nistAC-3
osppFIA_UAU.1, FIA_AFL.1
os-srgSRG-OS-000480-GPOS-00227
anssiR31
cisenable_authselect
pcidss48.3.4


var_authselect_profile='sssd'


authselect current

if test "$?" -ne 0; then
    authselect select "$var_authselect_profile"

    if test "$?" -ne 0; then
        if rpm --quiet --verify pam; then
            authselect select --force "$var_authselect_profile"
        else
	        echo "authselect is not used but files from the 'pam' package have been altered, so the authselect configuration won't be forced." >&2
        fi
    fi
fi
Group   Configure Syslog   Group contains 3 groups and 10 rules
[ref]   The syslog service has been the default Unix logging mechanism for many years. It has a number of downsides, including inconsistent log format, lack of authentication for received messages, and lack of authentication, encryption, or reliable transport for messages sent over a network. However, due to its long history, syslog is a de facto standard which is supported by almost all Unix applications.

In Red Hat Enterprise Linux 10, rsyslog has replaced ksyslogd as the syslog daemon of choice, and it includes some additional security features such as reliable, connection-oriented (i.e. TCP) transmission of logs, the option to log to database formats, and the encryption of log data en route to a central logging server. This section discusses how to configure rsyslog for best effect, and how to use tools provided with the system to maintain and monitor logs.
Group   Ensure Proper Configuration of Log Files   Group contains 4 rules
[ref]   The file /etc/rsyslog.conf controls where log message are written. These are controlled by lines called rules, which consist of a selector and an action. These rules are often customized depending on the role of the system, the requirements of the environment, and whatever may enable the administrator to most effectively make use of log data. The default rules in Red Hat Enterprise Linux 10 are:
*.info;mail.none;authpriv.none;cron.none                /var/log/messages
authpriv.*                                              /var/log/secure
mail.*                                                  -/var/log/maillog
cron.*                                                  /var/log/cron
*.emerg                                                 *
uucp,news.crit                                          /var/log/spooler
local7.*                                                /var/log/boot.log
See the man page rsyslog.conf(5) for more information. Note that the rsyslog daemon can be configured to use a timestamp format that some log processing programs may not understand. If this occurs, edit the file /etc/rsyslog.conf and add or edit the following line:
$ ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat

Rule   Ensure cron Is Logging To Rsyslog   [ref]

Cron logging must be implemented to spot intrusions or trace cron job status. If cron is not logging to rsyslog, it can be implemented by adding the following to the RULES section of /etc/rsyslog.conf: If the legacy syntax is used:
cron.*                                                  /var/log/cron
If the modern syntax (RainerScript) is used:
cron.* action(type="omfile" file="/var/log/cron")
Rationale:
Cron logging can be used to trace the successful or unsuccessful execution of cron jobs. It can also be used to spot intrusions into the use of the cron facility by unauthorized and malicious users.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_rsyslog_cron_logging
References:
cis-csc1, 14, 15, 16, 3, 5, 6
cobit5APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01
disaCCI-000366
isa-62443-20094.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4
isa-62443-2013SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1
ism0988, 1405
iso27001-2013A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.15.2.1, A.15.2.2
nistCM-6(a)
nist-csfID.SC-4, PR.PT-1
osppFAU_GEN.1.1.c
os-srgSRG-OS-000480-GPOS-00227

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! grep -s "^\s*cron\.\*\s*/var/log/cron$" /etc/rsyslog.conf /etc/rsyslog.d/*.conf; then
	mkdir -p /etc/rsyslog.d
	echo "cron.*	/var/log/cron" >> /etc/rsyslog.d/cron.conf
fi

systemctl restart rsyslog.service

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure Log Files Are Owned By Appropriate Group   [ref]

The group-owner of all log files written by rsyslog should be root. These log files are determined by the second part of each Rule line in /etc/rsyslog.conf and typically all appear in /var/log. For each log file LOGFILE referenced in /etc/rsyslog.conf, run the following command to inspect the file's group owner:
$ ls -l LOGFILE
        
If the owner is not root, run the following command to correct this:
$ sudo chgrp root LOGFILE
        
Rationale:
The log files generated by rsyslog contain valuable information regarding system configuration, user authentication, and other such information. Log files should be protected from unauthorized access.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_rsyslog_files_groupownership
References:
cis-csc12, 13, 14, 15, 16, 18, 3, 5
cobit5APO01.06, DSS05.04, DSS05.07, DSS06.02
disaCCI-001314
isa-62443-20094.3.3.7.3
isa-62443-2013SR 2.1, SR 5.2
ism0988, 1405
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistCM-6(a), AC-6(1)
nist-csfPR.AC-4, PR.DS-5
pcidssReq-10.5.1, Req-10.5.2
anssiR71
cis6.2.4.1
pcidss410.3.2

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Ensure Log Files Are Owned By Appropriate Group - Set rsyslog logfile configuration
    facts
  ansible.builtin.set_fact:
    rsyslog_etc_config: /etc/rsyslog.conf
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - Get IncludeConfig directive
  ansible.builtin.shell: |
    set -o pipefail
    grep -e '$IncludeConfig' {{ rsyslog_etc_config }} | cut -d ' ' -f 2 || true
  register: rsyslog_old_inc
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - Get include files directives
  ansible.builtin.shell: |
    set -o pipefail
    awk '/)/{f=0} /include\(/{f=1} f{ nf=gensub("^(include\\(|\\s*)file=\"(\\S+)\".*","\\2",1); if($0!=nf){ print nf }}' {{ rsyslog_etc_config }} || true
  register: rsyslog_new_inc
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - Aggregate rsyslog includes
  ansible.builtin.set_fact:
    include_config_output: '{{ rsyslog_old_inc.stdout_lines + rsyslog_new_inc.stdout_lines
      }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_old_inc is not skipped and rsyslog_new_inc is not skipped
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - List all config files
  ansible.builtin.find:
    paths: '{{ item | dirname }}'
    patterns: '{{ item | basename }}'
    hidden: false
    follow: true
  loop: '{{ include_config_output | list + [rsyslog_etc_config] }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - include_config_output is defined
  register: rsyslog_config_files
  failed_when: false
  changed_when: false
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - Extract log files old format
  ansible.builtin.shell: |
    set -o pipefail
    grep -oP '^[^(\s|#|\$)]+[\s]+.*[\s]+-?(/+[^:;\s]+);*\.*$' {{ item.1.path }} | \
    awk '{print $NF}' | \
    sed -e 's/^-//' || true
  loop: '{{ rsyslog_config_files.results | default([]) | subelements(''files'') }}'
  register: log_files_old
  changed_when: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_config_files is not skipped
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - Extract log files new format
  ansible.builtin.shell: |
    set -o pipefail
    grep -ozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" {{ item.1.path }} | \
    grep -aoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)" | \
    grep -oE "\"([/[:alnum:][:punct:]]*)\"" | \
    tr -d "\""|| true
  loop: '{{ rsyslog_config_files.results | default([]) | subelements(''files'') }}'
  register: log_files_new
  changed_when: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_config_files is not skipped
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - Sum all log files found
  ansible.builtin.set_fact:
    log_files: '{{ log_files_new.results | map(attribute=''stdout_lines'') | list
      | flatten | unique + log_files_old.results | map(attribute=''stdout_lines'')
      | list | flatten | unique }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group -Setup log files attribute
  ansible.builtin.file:
    path: '{{ item }}'
    group: root
    state: file
  loop: '{{ log_files | list | flatten | unique }}'
  failed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# List of log file paths to be inspected for correct permissions
# * Primarily inspect log file paths listed in /etc/rsyslog.conf
RSYSLOG_ETC_CONFIG="/etc/rsyslog.conf"
# * And also the log file paths listed after rsyslog's $IncludeConfig directive
#   (store the result into array for the case there's shell glob used as value of IncludeConfig)
readarray -t OLD_INC < <(grep -e "\$IncludeConfig[[:space:]]\+[^[:space:];]\+" /etc/rsyslog.conf | cut -d ' ' -f 2)
readarray -t RSYSLOG_INCLUDE_CONFIG < <(for INCPATH in "${OLD_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)
readarray -t NEW_INC < <(sed -n '/^\s*include(/,/)/Ip' /etc/rsyslog.conf | sed -n 's@.*file\s*=\s*"\([/[:alnum:][:punct:]]*\)".*@\1@Ip')
readarray -t RSYSLOG_INCLUDE < <(for INCPATH in "${NEW_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)

# Declare an array to hold the final list of different log file paths
declare -a LOG_FILE_PATHS

# Array to hold all rsyslog config entries
RSYSLOG_CONFIGS=()
RSYSLOG_CONFIGS=("${RSYSLOG_ETC_CONFIG}" "${RSYSLOG_INCLUDE_CONFIG[@]}" "${RSYSLOG_INCLUDE[@]}")

# Get full list of files to be checked
# RSYSLOG_CONFIGS may contain globs such as
# /etc/rsyslog.d/*.conf /etc/rsyslog.d/*.frule
# So, loop over the entries in RSYSLOG_CONFIGS and use find to get the list of included files.
RSYSLOG_CONFIG_FILES=()
for ENTRY in "${RSYSLOG_CONFIGS[@]}"
do
	# If directory, rsyslog will search for config files in recursively.
	# However, files in hidden sub-directories or hidden files will be ignored.
	if [ -d "${ENTRY}" ]
	then
		readarray -t FINDOUT < <(find "${ENTRY}" -not -path '*/.*' -type f)
		RSYSLOG_CONFIG_FILES+=("${FINDOUT[@]}")
	elif [ -f "${ENTRY}" ]
	then
		RSYSLOG_CONFIG_FILES+=("${ENTRY}")
	else
		echo "Invalid include object: ${ENTRY}"
	fi
done

# Browse each file selected above as containing paths of log files
# ('/etc/rsyslog.conf' and '/etc/rsyslog.d/*.conf' in the default configuration)
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	# From each of these files extract just particular log file path(s), thus:
	# * Ignore lines starting with space (' '), comment ('#"), or variable syntax ('$') characters,
	# * Ignore empty lines,
	# * Strip quotes and closing brackets from paths.
	# * Ignore paths that match /dev|/etc.*\.conf, as those are paths, but likely not log files
	# * From the remaining valid rows select only fields constituting a log file path
	# Text file column is understood to represent a log file path if and only if all of the
	# following are met:
	# * it contains at least one slash '/' character,
	# * it is preceded by space
	# * it doesn't contain space (' '), colon (':'), and semicolon (';') characters
	# Search log file for path(s) only in case it exists!
	if [[ -f "${LOG_FILE}" ]]
	then
		NORMALIZED_CONFIG_FILE_LINES=$(sed -e "/^[#|$]/d" "${LOG_FILE}")
		LINES_WITH_PATHS=$(grep '[^/]*\s\+\S*/\S\+$' <<< "${NORMALIZED_CONFIG_FILE_LINES}")
		FILTERED_PATHS=$(awk '{if(NF>=2&&($NF~/^\//||$NF~/^-\//)){sub(/^-\//,"/",$NF);print $NF}}' <<< "${LINES_WITH_PATHS}")
		CLEANED_PATHS=$(sed -e "s/[\"')]//g; /\\/etc.*\.conf/d; /\\/dev\\//d" <<< "${FILTERED_PATHS}")
		MATCHED_ITEMS=$(sed -e "/^$/d" <<< "${CLEANED_PATHS}")
		# Since above sed command might return more than one item (delimited by newline), split
		# the particular matches entries into new array specific for this log file
		readarray -t ARRAY_FOR_LOG_FILE <<< "$MATCHED_ITEMS"
		# Concatenate the two arrays - previous content of $LOG_FILE_PATHS array with
		# items from newly created array for this log file
		LOG_FILE_PATHS+=("${ARRAY_FOR_LOG_FILE[@]}")
		# Delete the temporary array
		unset ARRAY_FOR_LOG_FILE
	fi
done

# Check for RainerScript action log format which might be also multiline so grep regex is a bit
# curly:
# extract possibly multiline action omfile expressions
# extract File="logfile" expression
# match only "logfile" expression
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	ACTION_OMFILE_LINES=$(grep -iozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" "${LOG_FILE}")
	OMFILE_LINES=$(echo "${ACTION_OMFILE_LINES}"| grep -iaoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)")
	LOG_FILE_PATHS+=("$(echo "${OMFILE_LINES}"| grep -oE "\"([/[:alnum:][:punct:]]*)\""|tr -d "\"")")
done

# Ensure the correct attribute if file exists
FILE_CMD="chgrp"
for LOG_FILE_PATH in "${LOG_FILE_PATHS[@]}"
do
	# Sanity check - if particular $LOG_FILE_PATH is empty string, skip it from further processing
	if [ -z "$LOG_FILE_PATH" ]
	then
		continue
	fi
	$FILE_CMD "root" "$LOG_FILE_PATH"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure Log Files Are Owned By Appropriate User   [ref]

The owner of all log files written by rsyslog should be root. These log files are determined by the second part of each Rule line in /etc/rsyslog.conf and typically all appear in /var/log. For each log file LOGFILE referenced in /etc/rsyslog.conf, run the following command to inspect the file's owner:
$ ls -l LOGFILE
        
If the owner is not root, run the following command to correct this:
$ sudo chown root LOGFILE
        
Rationale:
The log files generated by rsyslog contain valuable information regarding system configuration, user authentication, and other such information. Log files should be protected from unauthorized access.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_rsyslog_files_ownership
References:
cis-csc12, 13, 14, 15, 16, 18, 3, 5
cobit5APO01.06, DSS05.04, DSS05.07, DSS06.02
disaCCI-001314
isa-62443-20094.3.3.7.3
isa-62443-2013SR 2.1, SR 5.2
ism0988, 1405
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistCM-6(a), AC-6(1)
nist-csfPR.AC-4, PR.DS-5
pcidssReq-10.5.1, Req-10.5.2
anssiR71
cis6.2.4.1
pcidss410.3.2

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Ensure Log Files Are Owned By Appropriate User - Set rsyslog logfile configuration
    facts
  ansible.builtin.set_fact:
    rsyslog_etc_config: /etc/rsyslog.conf
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - Get IncludeConfig directive
  ansible.builtin.shell: |
    set -o pipefail
    grep -e '$IncludeConfig' {{ rsyslog_etc_config }} | cut -d ' ' -f 2 || true
  register: rsyslog_old_inc
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - Get include files directives
  ansible.builtin.shell: |
    set -o pipefail
    awk '/)/{f=0} /include\(/{f=1} f{ nf=gensub("^(include\\(|\\s*)file=\"(\\S+)\".*","\\2",1); if($0!=nf){ print nf }}' {{ rsyslog_etc_config }} || true
  register: rsyslog_new_inc
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - Aggregate rsyslog includes
  ansible.builtin.set_fact:
    include_config_output: '{{ rsyslog_old_inc.stdout_lines + rsyslog_new_inc.stdout_lines
      }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_old_inc is not skipped and rsyslog_new_inc is not skipped
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - List all config files
  ansible.builtin.find:
    paths: '{{ item | dirname }}'
    patterns: '{{ item | basename }}'
    hidden: false
    follow: true
  loop: '{{ include_config_output | list + [rsyslog_etc_config] }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - include_config_output is defined
  register: rsyslog_config_files
  failed_when: false
  changed_when: false
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - Extract log files old format
  ansible.builtin.shell: |
    set -o pipefail
    grep -oP '^[^(\s|#|\$)]+[\s]+.*[\s]+-?(/+[^:;\s]+);*\.*$' {{ item.1.path }} | \
    awk '{print $NF}' | \
    sed -e 's/^-//' || true
  loop: '{{ rsyslog_config_files.results | default([]) | subelements(''files'') }}'
  register: log_files_old
  changed_when: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_config_files is not skipped
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - Extract log files new format
  ansible.builtin.shell: |
    set -o pipefail
    grep -ozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" {{ item.1.path }} | \
    grep -aoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)" | \
    grep -oE "\"([/[:alnum:][:punct:]]*)\"" | \
    tr -d "\""|| true
  loop: '{{ rsyslog_config_files.results | default([]) | subelements(''files'') }}'
  register: log_files_new
  changed_when: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_config_files is not skipped
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - Sum all log files found
  ansible.builtin.set_fact:
    log_files: '{{ log_files_new.results | map(attribute=''stdout_lines'') | list
      | flatten | unique + log_files_old.results | map(attribute=''stdout_lines'')
      | list | flatten | unique }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User -Setup log files attribute
  ansible.builtin.file:
    path: '{{ item }}'
    owner: root
    state: file
  loop: '{{ log_files | list | flatten | unique }}'
  failed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# List of log file paths to be inspected for correct permissions
# * Primarily inspect log file paths listed in /etc/rsyslog.conf
RSYSLOG_ETC_CONFIG="/etc/rsyslog.conf"
# * And also the log file paths listed after rsyslog's $IncludeConfig directive
#   (store the result into array for the case there's shell glob used as value of IncludeConfig)
readarray -t OLD_INC < <(grep -e "\$IncludeConfig[[:space:]]\+[^[:space:];]\+" /etc/rsyslog.conf | cut -d ' ' -f 2)
readarray -t RSYSLOG_INCLUDE_CONFIG < <(for INCPATH in "${OLD_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)
readarray -t NEW_INC < <(sed -n '/^\s*include(/,/)/Ip' /etc/rsyslog.conf | sed -n 's@.*file\s*=\s*"\([/[:alnum:][:punct:]]*\)".*@\1@Ip')
readarray -t RSYSLOG_INCLUDE < <(for INCPATH in "${NEW_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)

# Declare an array to hold the final list of different log file paths
declare -a LOG_FILE_PATHS

# Array to hold all rsyslog config entries
RSYSLOG_CONFIGS=()
RSYSLOG_CONFIGS=("${RSYSLOG_ETC_CONFIG}" "${RSYSLOG_INCLUDE_CONFIG[@]}" "${RSYSLOG_INCLUDE[@]}")

# Get full list of files to be checked
# RSYSLOG_CONFIGS may contain globs such as
# /etc/rsyslog.d/*.conf /etc/rsyslog.d/*.frule
# So, loop over the entries in RSYSLOG_CONFIGS and use find to get the list of included files.
RSYSLOG_CONFIG_FILES=()
for ENTRY in "${RSYSLOG_CONFIGS[@]}"
do
	# If directory, rsyslog will search for config files in recursively.
	# However, files in hidden sub-directories or hidden files will be ignored.
	if [ -d "${ENTRY}" ]
	then
		readarray -t FINDOUT < <(find "${ENTRY}" -not -path '*/.*' -type f)
		RSYSLOG_CONFIG_FILES+=("${FINDOUT[@]}")
	elif [ -f "${ENTRY}" ]
	then
		RSYSLOG_CONFIG_FILES+=("${ENTRY}")
	else
		echo "Invalid include object: ${ENTRY}"
	fi
done

# Browse each file selected above as containing paths of log files
# ('/etc/rsyslog.conf' and '/etc/rsyslog.d/*.conf' in the default configuration)
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	# From each of these files extract just particular log file path(s), thus:
	# * Ignore lines starting with space (' '), comment ('#"), or variable syntax ('$') characters,
	# * Ignore empty lines,
	# * Strip quotes and closing brackets from paths.
	# * Ignore paths that match /dev|/etc.*\.conf, as those are paths, but likely not log files
	# * From the remaining valid rows select only fields constituting a log file path
	# Text file column is understood to represent a log file path if and only if all of the
	# following are met:
	# * it contains at least one slash '/' character,
	# * it is preceded by space
	# * it doesn't contain space (' '), colon (':'), and semicolon (';') characters
	# Search log file for path(s) only in case it exists!
	if [[ -f "${LOG_FILE}" ]]
	then
		NORMALIZED_CONFIG_FILE_LINES=$(sed -e "/^[#|$]/d" "${LOG_FILE}")
		LINES_WITH_PATHS=$(grep '[^/]*\s\+\S*/\S\+$' <<< "${NORMALIZED_CONFIG_FILE_LINES}")
		FILTERED_PATHS=$(awk '{if(NF>=2&&($NF~/^\//||$NF~/^-\//)){sub(/^-\//,"/",$NF);print $NF}}' <<< "${LINES_WITH_PATHS}")
		CLEANED_PATHS=$(sed -e "s/[\"')]//g; /\\/etc.*\.conf/d; /\\/dev\\//d" <<< "${FILTERED_PATHS}")
		MATCHED_ITEMS=$(sed -e "/^$/d" <<< "${CLEANED_PATHS}")
		# Since above sed command might return more than one item (delimited by newline), split
		# the particular matches entries into new array specific for this log file
		readarray -t ARRAY_FOR_LOG_FILE <<< "$MATCHED_ITEMS"
		# Concatenate the two arrays - previous content of $LOG_FILE_PATHS array with
		# items from newly created array for this log file
		LOG_FILE_PATHS+=("${ARRAY_FOR_LOG_FILE[@]}")
		# Delete the temporary array
		unset ARRAY_FOR_LOG_FILE
	fi
done

# Check for RainerScript action log format which might be also multiline so grep regex is a bit
# curly:
# extract possibly multiline action omfile expressions
# extract File="logfile" expression
# match only "logfile" expression
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	ACTION_OMFILE_LINES=$(grep -iozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" "${LOG_FILE}")
	OMFILE_LINES=$(echo "${ACTION_OMFILE_LINES}"| grep -iaoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)")
	LOG_FILE_PATHS+=("$(echo "${OMFILE_LINES}"| grep -oE "\"([/[:alnum:][:punct:]]*)\""|tr -d "\"")")
done

# Ensure the correct attribute if file exists
FILE_CMD="chown"
for LOG_FILE_PATH in "${LOG_FILE_PATHS[@]}"
do
	# Sanity check - if particular $LOG_FILE_PATH is empty string, skip it from further processing
	if [ -z "$LOG_FILE_PATH" ]
	then
		continue
	fi
	$FILE_CMD "root" "$LOG_FILE_PATH"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure System Log Files Have Correct Permissions   [ref]

The file permissions for all log files written by rsyslog should be set to 640, or more restrictive. These log files are determined by the second part of each Rule line in /etc/rsyslog.conf and typically all appear in /var/log. For each log file LOGFILE referenced in /etc/rsyslog.conf, run the following command to inspect the file's permissions:
$ ls -l LOGFILE
        
If the permissions are not 640 or more restrictive, run the following command to correct this:
$ sudo chmod 640 LOGFILE
        
"
Rationale:
Log files can contain valuable information regarding system configuration. If the system log files are not protected unauthorized users could change the logged data, eliminating their forensic value.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_rsyslog_files_permissions
References:
disaCCI-001314
ism0988, 1405
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistCM-6(a), AC-6(1)
pcidssReq-10.5.1, Req-10.5.2
anssiR71
cis6.2.4.1
pcidss410.3.1

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Ensure System Log Files Have Correct Permissions - Set rsyslog logfile configuration
    facts
  ansible.builtin.set_fact:
    rsyslog_etc_config: /etc/rsyslog.conf
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - Get IncludeConfig directive
  ansible.builtin.shell: |
    set -o pipefail
    grep -e '$IncludeConfig' {{ rsyslog_etc_config }} | cut -d ' ' -f 2 || true
  register: rsyslog_old_inc
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - Get include files directives
  ansible.builtin.shell: |
    set -o pipefail
    awk '/)/{f=0} /include\(/{f=1} f{ nf=gensub("^(include\\(|\\s*)file=\"(\\S+)\".*","\\2",1); if($0!=nf){ print nf }}' {{ rsyslog_etc_config }} || true
  register: rsyslog_new_inc
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - Aggregate rsyslog includes
  ansible.builtin.set_fact:
    include_config_output: '{{ rsyslog_old_inc.stdout_lines + rsyslog_new_inc.stdout_lines
      }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_old_inc is not skipped and rsyslog_new_inc is not skipped
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - List all config files
  ansible.builtin.find:
    paths: '{{ item | dirname }}'
    patterns: '{{ item | basename }}'
    hidden: false
    follow: true
  loop: '{{ include_config_output | list + [rsyslog_etc_config] }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - include_config_output is defined
  register: rsyslog_config_files
  failed_when: false
  changed_when: false
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - Extract log files old format
  ansible.builtin.shell: |
    set -o pipefail
    grep -oP '^[^(\s|#|\$)]+[\s]+.*[\s]+-?(/+[^:;\s]+);*\.*$' {{ item.1.path }} | \
    awk '{print $NF}' | \
    sed -e 's/^-//' || true
  loop: '{{ rsyslog_config_files.results | default([]) | subelements(''files'') }}'
  register: log_files_old
  changed_when: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_config_files is not skipped
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - Extract log files new format
  ansible.builtin.shell: |
    set -o pipefail
    grep -ozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" {{ item.1.path }} | \
    grep -aoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)" | \
    grep -oE "\"([/[:alnum:][:punct:]]*)\"" | \
    tr -d "\""|| true
  loop: '{{ rsyslog_config_files.results | default([]) | subelements(''files'') }}'
  register: log_files_new
  changed_when: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_config_files is not skipped
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - Sum all log files found
  ansible.builtin.set_fact:
    log_files: '{{ log_files_new.results | map(attribute=''stdout_lines'') | list
      | flatten | unique + log_files_old.results | map(attribute=''stdout_lines'')
      | list | flatten | unique }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions -Setup log files attribute
  ansible.builtin.file:
    path: '{{ item }}'
    mode: '0640'
    state: file
  loop: '{{ log_files | list | flatten | unique }}'
  failed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# List of log file paths to be inspected for correct permissions
# * Primarily inspect log file paths listed in /etc/rsyslog.conf
RSYSLOG_ETC_CONFIG="/etc/rsyslog.conf"
# * And also the log file paths listed after rsyslog's $IncludeConfig directive
#   (store the result into array for the case there's shell glob used as value of IncludeConfig)
readarray -t OLD_INC < <(grep -e "\$IncludeConfig[[:space:]]\+[^[:space:];]\+" /etc/rsyslog.conf | cut -d ' ' -f 2)
readarray -t RSYSLOG_INCLUDE_CONFIG < <(for INCPATH in "${OLD_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)
readarray -t NEW_INC < <(sed -n '/^\s*include(/,/)/Ip' /etc/rsyslog.conf | sed -n 's@.*file\s*=\s*"\([/[:alnum:][:punct:]]*\)".*@\1@Ip')
readarray -t RSYSLOG_INCLUDE < <(for INCPATH in "${NEW_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)

# Declare an array to hold the final list of different log file paths
declare -a LOG_FILE_PATHS

# Array to hold all rsyslog config entries
RSYSLOG_CONFIGS=()
RSYSLOG_CONFIGS=("${RSYSLOG_ETC_CONFIG}" "${RSYSLOG_INCLUDE_CONFIG[@]}" "${RSYSLOG_INCLUDE[@]}")

# Get full list of files to be checked
# RSYSLOG_CONFIGS may contain globs such as
# /etc/rsyslog.d/*.conf /etc/rsyslog.d/*.frule
# So, loop over the entries in RSYSLOG_CONFIGS and use find to get the list of included files.
RSYSLOG_CONFIG_FILES=()
for ENTRY in "${RSYSLOG_CONFIGS[@]}"
do
	# If directory, rsyslog will search for config files in recursively.
	# However, files in hidden sub-directories or hidden files will be ignored.
	if [ -d "${ENTRY}" ]
	then
		readarray -t FINDOUT < <(find "${ENTRY}" -not -path '*/.*' -type f)
		RSYSLOG_CONFIG_FILES+=("${FINDOUT[@]}")
	elif [ -f "${ENTRY}" ]
	then
		RSYSLOG_CONFIG_FILES+=("${ENTRY}")
	else
		echo "Invalid include object: ${ENTRY}"
	fi
done

# Browse each file selected above as containing paths of log files
# ('/etc/rsyslog.conf' and '/etc/rsyslog.d/*.conf' in the default configuration)
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	# From each of these files extract just particular log file path(s), thus:
	# * Ignore lines starting with space (' '), comment ('#"), or variable syntax ('$') characters,
	# * Ignore empty lines,
	# * Strip quotes and closing brackets from paths.
	# * Ignore paths that match /dev|/etc.*\.conf, as those are paths, but likely not log files
	# * From the remaining valid rows select only fields constituting a log file path
	# Text file column is understood to represent a log file path if and only if all of the
	# following are met:
	# * it contains at least one slash '/' character,
	# * it is preceded by space
	# * it doesn't contain space (' '), colon (':'), and semicolon (';') characters
	# Search log file for path(s) only in case it exists!
	if [[ -f "${LOG_FILE}" ]]
	then
		NORMALIZED_CONFIG_FILE_LINES=$(sed -e "/^[#|$]/d" "${LOG_FILE}")
		LINES_WITH_PATHS=$(grep '[^/]*\s\+\S*/\S\+$' <<< "${NORMALIZED_CONFIG_FILE_LINES}")
		FILTERED_PATHS=$(awk '{if(NF>=2&&($NF~/^\//||$NF~/^-\//)){sub(/^-\//,"/",$NF);print $NF}}' <<< "${LINES_WITH_PATHS}")
		CLEANED_PATHS=$(sed -e "s/[\"')]//g; /\\/etc.*\.conf/d; /\\/dev\\//d" <<< "${FILTERED_PATHS}")
		MATCHED_ITEMS=$(sed -e "/^$/d" <<< "${CLEANED_PATHS}")
		# Since above sed command might return more than one item (delimited by newline), split
		# the particular matches entries into new array specific for this log file
		readarray -t ARRAY_FOR_LOG_FILE <<< "$MATCHED_ITEMS"
		# Concatenate the two arrays - previous content of $LOG_FILE_PATHS array with
		# items from newly created array for this log file
		LOG_FILE_PATHS+=("${ARRAY_FOR_LOG_FILE[@]}")
		# Delete the temporary array
		unset ARRAY_FOR_LOG_FILE
	fi
done

# Check for RainerScript action log format which might be also multiline so grep regex is a bit
# curly:
# extract possibly multiline action omfile expressions
# extract File="logfile" expression
# match only "logfile" expression
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	ACTION_OMFILE_LINES=$(grep -iozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" "${LOG_FILE}")
	OMFILE_LINES=$(echo "${ACTION_OMFILE_LINES}"| grep -iaoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)")
	LOG_FILE_PATHS+=("$(echo "${OMFILE_LINES}"| grep -oE "\"([/[:alnum:][:punct:]]*)\""|tr -d "\"")")
done

# Ensure the correct attribute if file exists
FILE_CMD="chmod"
for LOG_FILE_PATH in "${LOG_FILE_PATHS[@]}"
do
	# Sanity check - if particular $LOG_FILE_PATH is empty string, skip it from further processing
	if [ -z "$LOG_FILE_PATH" ]
	then
		continue
	fi
	$FILE_CMD "0640" "$LOG_FILE_PATH"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Configure rsyslogd to Accept Remote Messages If Acting as a Log Server   Group contains 1 rule
[ref]   By default, rsyslog does not listen over the network for log messages. If needed, modules can be enabled to allow the rsyslog daemon to receive messages from other systems and for the system thus to act as a log server. If the system is not a log server, then lines concerning these modules should remain commented out.

Rule   Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server   [ref]

The rsyslog daemon should not accept remote messages unless the system acts as a log server. To ensure that it is not listening on the network, ensure any of the following lines are not found in rsyslog configuration files. If using legacy syntax:
$ModLoad imtcp
$InputTCPServerRun port
$ModLoad imudp
$UDPServerRun port
$ModLoad imrelp
$InputRELPServerRun port
        
If using RainerScript syntax:
module(load="imtcp")
module(load="imudp")
input(type="imtcp" port="514")
input(type="imudp" port="514")
Rationale:
Any process which receives messages from the network incurs some risk of receiving malicious messages. This risk can be eliminated for rsyslog by configuring it not to listen on the network.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_rsyslog_nolisten
References:
cis-csc1, 11, 12, 13, 14, 15, 16, 18, 3, 4, 5, 6, 8, 9
cobit5APO01.06, APO11.04, APO13.01, BAI03.05, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.07, DSS06.02, MEA02.01
disaCCI-000318, CCI-000366, CCI-000368, CCI-001812, CCI-001813, CCI-001814
isa-62443-20094.2.3.4, 4.3.3.3.9, 4.3.3.4, 4.3.3.5.8, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, 4.4.3.3
isa-62443-2013SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
ism0988, 1405
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.5.1, A.12.6.2, A.12.7.1, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nistCM-7(a), CM-7(b), CM-6(a)
nist-csfDE.AE-1, ID.AM-3, PR.AC-5, PR.DS-5, PR.IP-1, PR.PT-1, PR.PT-4
os-srgSRG-OS-000480-GPOS-00227

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Define Rsyslog Config Lines Regex in Legacy Syntax
  ansible.builtin.set_fact:
    rsyslog_listen_legacy_regex: ^\s*\$(((Input(TCP|RELP)|UDP)ServerRun)|ModLoad\s+(imtcp|imudp|imrelp))
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Search for Legacy Config Lines in Rsyslog Main Config File
  ansible.builtin.find:
    paths: /etc
    pattern: rsyslog.conf
    contains: '{{ rsyslog_listen_legacy_regex }}'
  register: rsyslog_listen_legacy_main_file
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Search for Legacy Config Lines in Rsyslog Include Files
  ansible.builtin.find:
    paths: /etc/rsyslog.d/
    pattern: '*.conf'
    contains: '{{ rsyslog_listen_legacy_regex }}'
  register: rsyslog_listen_legacy_include_files
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Assemble List of Config Files With Listen Lines in Legacy Syntax
  ansible.builtin.set_fact:
    rsyslog_legacy_remote_listen_files: '{{ rsyslog_listen_legacy_main_file.files
      | map(attribute=''path'') | list + rsyslog_listen_legacy_include_files.files
      | map(attribute=''path'') | list }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Comment Listen Config Lines Wherever Defined Using Legacy Syntax
  ansible.builtin.replace:
    path: '{{ item }}'
    regexp: '{{ rsyslog_listen_legacy_regex }}'
    replace: '# \1'
  loop: '{{ rsyslog_legacy_remote_listen_files }}'
  register: rsyslog_listen_legacy_comment
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_legacy_remote_listen_files | length > 0
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Define Rsyslog Config Lines Regex in RainerScript Syntax
  ansible.builtin.set_fact:
    rsyslog_listen_rainer_regex: ^\s*(module|input)\((load|type)="(imtcp|imudp)".*$
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Search for RainerScript Config Lines in Rsyslog Main Config File
  ansible.builtin.find:
    paths: /etc
    pattern: rsyslog.conf
    contains: '{{ rsyslog_listen_rainer_regex }}'
  register: rsyslog_rainer_remote_main_file
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Search for RainerScript Config Lines in Rsyslog Include Files
  ansible.builtin.find:
    paths: /etc/rsyslog.d/
    pattern: '*.conf'
    contains: '{{ rsyslog_listen_rainer_regex }}'
  register: rsyslog_rainer_remote_include_files
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Assemble List of Config Files With Listen Lines in RainerScript
  ansible.builtin.set_fact:
    rsyslog_rainer_remote_listen_files: '{{ rsyslog_rainer_remote_main_file.files
      | map(attribute=''path'') | list + rsyslog_rainer_remote_include_files.files
      | map(attribute=''path'') | list }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Comment Listen Config Lines Wherever Defined Using RainerScript
  ansible.builtin.replace:
    path: '{{ item }}'
    regexp: '{{ rsyslog_listen_rainer_regex }}'
    replace: '# \1'
  loop: '{{ rsyslog_rainer_remote_listen_files }}'
  register: rsyslog_listen_rainer_comment
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_rainer_remote_listen_files | length > 0
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

- name: Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server
    - Restart Rsyslog if Any Line Were Commented Out
  ansible.builtin.service:
    name: rsyslog
    state: restarted
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_listen_legacy_comment is changed or rsyslog_listen_rainer_comment is changed
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_nolisten

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

legacy_regex='^\s*\$(((Input(TCP|RELP)|UDP)ServerRun)|ModLoad\s+(imtcp|imudp|imrelp))'
rainer_regex='^\s*(module|input)\((load|type)="(imtcp|imudp)".*$'

readarray -t legacy_targets < <(grep -l -E -r "${legacy_regex[@]}" /etc/rsyslog.conf /etc/rsyslog.d/)
readarray -t rainer_targets < <(grep -l -E -r "${rainer_regex[@]}" /etc/rsyslog.conf /etc/rsyslog.d/)

config_changed=false
if [ ${#legacy_targets[@]} -gt 0 ]; then
    for target in "${legacy_targets[@]}"; do
        sed -E -i "/$legacy_regex/ s/^/# /" "$target"
    done
    config_changed=true
fi

if [ ${#rainer_targets[@]} -gt 0 ]; then
    for target in "${rainer_targets[@]}"; do
        sed -E -i "/$rainer_regex/ s/^/# /" "$target"
    done
    config_changed=true
fi

if $config_changed; then
    systemctl restart rsyslog.service
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Rsyslog Logs Sent To Remote Host   Group contains 3 rules
[ref]   If system logs are to be useful in detecting malicious activities, it is necessary to send logs to a remote server. An intruder who has compromised the root account on a system may delete the log entries which indicate that the system was attacked before they are seen by an administrator.

However, it is recommended that logs be stored on the local host in addition to being sent to the loghost, especially if rsyslog has been configured to use the UDP protocol to send messages over a network. UDP does not guarantee reliable delivery, and moderately busy sites will lose log messages occasionally, especially in periods of high traffic which may be the result of an attack. In addition, remote rsyslog messages are not authenticated in any way by default, so it is easy for an attacker to introduce spurious messages to the central log server. Also, some problems cause loss of network connectivity, which will prevent the sending of messages to the central server. For all of these reasons, it is better to store log messages both centrally and on each host, so that they can be correlated if necessary.

Rule   Ensure Logs Sent To Remote Host   [ref]

To configure rsyslog to send logs to a remote log server, open /etc/rsyslog.conf and read and understand the last section of the file, which describes the multiple directives necessary to activate remote logging. Along with these other directives, the system can be configured to forward its logs to a particular log server by adding or correcting one of the following lines, substituting logcollector appropriately. The choice of protocol depends on the environment of the system; although TCP and RELP provide more reliable message delivery, they may not be supported in all environments.
To use UDP for log message delivery:
*.* @logcollector
        

To use TCP for log message delivery:
*.* @@logcollector
        

To use RELP for log message delivery:
*.* :omrelp:logcollector
        

There must be a resolvable DNS CNAME or Alias record set to "logcollector" for logs to be sent correctly to the centralized logging utility.
Warning:  It is important to configure queues in case the client is sending log messages to a remote server. If queues are not configured, the system will stop functioning when the connection to the remote server is not available. Please consult Rsyslog documentation for more information about configuration of queues. The example configuration which should go into /etc/rsyslog.conf can look like the following lines:
$ActionQueueType LinkedList
$ActionQueueFileName queuefilename
$ActionQueueMaxDiskSpace 1g
$ActionQueueSaveOnShutdown on
$ActionResumeRetryCount -1
Rationale:
A log server (loghost) receives syslog messages from one or more systems. This data can be used as an additional log source in the event a system is compromised and its local logs are suspect. Forwarding log messages to a remote loghost also provides system administrators with a centralized place to view the status of multiple hosts within the enterprise.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_rsyslog_remote_loghost
References:
cis-csc1, 13, 14, 15, 16, 2, 3, 5, 6
cobit5APO11.04, APO13.01, BAI03.05, BAI04.04, DSS05.04, DSS05.07, MEA02.01
disaCCI-000366, CCI-001348, CCI-000136, CCI-001851
hipaa164.308(a)(1)(ii)(D), 164.308(a)(5)(ii)(B), 164.308(a)(5)(ii)(C), 164.308(a)(6)(ii), 164.308(a)(8), 164.310(d)(2)(iii), 164.312(b), 164.314(a)(2)(i)(C), 164.314(a)(2)(iii)
isa-62443-20094.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4
isa-62443-2013SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 7.1, SR 7.2
ism0988, 1405
iso27001-2013A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.17.2.1
nerc-cipCIP-003-8 R5.2, CIP-004-6 R3.3
nistCM-6(a), AU-4(1), AU-9(2)
nist-csfPR.DS-4, PR.PT-1
osppFAU_GEN.1.1.c
os-srgSRG-OS-000479-GPOS-00224, SRG-OS-000480-GPOS-00227, SRG-OS-000342-GPOS-00133
anssiR71

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value rsyslog_remote_loghost_address # promote to variable
  set_fact:
    rsyslog_remote_loghost_address: !!str logcollector
  tags:
    - always

- name: Set rsyslog remote loghost
  lineinfile:
    dest: /etc/rsyslog.conf
    regexp: ^\*\.\*
    line: '*.* @@{{ rsyslog_remote_loghost_address }}'
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AU-4(1)
  - NIST-800-53-AU-9(2)
  - NIST-800-53-CM-6(a)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - rsyslog_remote_loghost

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

rsyslog_remote_loghost_address='logcollector'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^\*\.\*")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "@@$rsyslog_remote_loghost_address"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^\*\.\*\\>" "/etc/rsyslog.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^\*\.\*\\>.*/$escaped_formatted_output/gi" "/etc/rsyslog.conf"
else
    if [[ -s "/etc/rsyslog.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/rsyslog.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/rsyslog.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/rsyslog.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Configure TLS for rsyslog remote logging   [ref]

Configure rsyslog to use Transport Layer Security (TLS) support for logging to remote server for the Forwarding Output Module in /etc/rsyslog.conf using action. You can use the following command:
echo 'action(type="omfwd" protocol="tcp" Target="<remote system>" port="6514"
    StreamDriver="gtls" StreamDriverMode="1" StreamDriverAuthMode="x509/name" streamdriver.CheckExtendedKeyPurpose="on")' >> /etc/rsyslog.conf
Replace the <remote system> in the above command with an IP address or a host name of the remote logging server.
Rationale:
For protection of data being logged, the connection to the remote logging server needs to be authenticated and encrypted.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_rsyslog_remote_tls
References:
ism0988, 1405
nistAU-9(3), CM-6(a)
osppFCS_TLSC_EXT.1, FTP_ITC_EXT.1.1, FIA_X509_EXT.1.1, FMT_SMF_EXT.1.1
os-srgSRG-OS-000480-GPOS-00227, SRG-OS-000120-GPOS-00061
anssiR71

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: XCCDF Value rsyslog_remote_loghost_address # promote to variable
  set_fact:
    rsyslog_remote_loghost_address: !!str logcollector
  tags:
    - always

- name: 'Configure TLS for rsyslog remote logging: search for omfwd action directive
    in rsyslog include files'
  ansible.builtin.find:
    paths: /etc/rsyslog.d/
    pattern: '*.conf'
    contains: ^\s*action\s*\(\s*type\s*=\s*"omfwd".*
  register: rsyslog_includes_with_directive
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_remote_tls

- name: 'Configure TLS for rsyslog remote logging: search for omfwd action directive
    in rsyslog main config file'
  ansible.builtin.find:
    paths: /etc
    pattern: rsyslog.conf
    contains: ^\s*action\s*\(\s*type\s*=\s*"omfwd".*
  register: rsyslog_main_file_with_directive
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_remote_tls

- name: 'Configure TLS for rsyslog remote logging: declare Rsyslog option parameters
    to be inserted if entirely missing'
  ansible.builtin.set_fact:
    rsyslog_parameters_to_add_if_missing:
    - protocol
    - target
    - port
    - StreamDriver
    - StreamDriverMode
    - StreamDriverAuthMode
    - streamdriver.CheckExtendedKeyPurpose
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_remote_tls

- name: 'Configure TLS for rsyslog remote logging: declare Rsyslog option values to
    be inserted if entirely missing'
  ansible.builtin.set_fact:
    rsyslog_values_to_add_if_missing:
    - tcp
    - '{{ rsyslog_remote_loghost_address }}'
    - '6514'
    - gtls
    - '1'
    - x509/name
    - 'on'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_remote_tls

- name: 'Configure TLS for rsyslog remote logging: declare Rsyslog option parameters
    to be replaced if defined with wrong values'
  ansible.builtin.set_fact:
    rsyslog_parameters_to_replace_if_wrong_value:
    - protocol
    - StreamDriver
    - StreamDriverMode
    - StreamDriverAuthMode
    - streamdriver.CheckExtendedKeyPurpose
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_remote_tls

- name: 'Configure TLS for rsyslog remote logging: declare Rsyslog option values to
    be replaced when having wrong value'
  ansible.builtin.set_fact:
    rsyslog_values_to_replace_if_wrong_value:
    - tcp
    - gtls
    - '1'
    - x509/name
    - 'on'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_remote_tls

- name: 'Configure TLS for rsyslog remote logging: assemble list of files with existing
    directives'
  ansible.builtin.set_fact:
    rsyslog_files: '{{ rsyslog_includes_with_directive.files | map(attribute=''path'')
      | list + rsyslog_main_file_with_directive.files | map(attribute=''path'') |
      list }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_remote_tls

- name: 'Configure TLS for rsyslog remote logging: try to fix existing directives'
  block:

  - name: 'Configure TLS for rsyslog remote logging: Fix existing omfwd directives
      by adjusting the value'
    ansible.builtin.replace:
      path: '{{ item[0] }}'
      regexp: (?i)^(\s*action\s*\(\s*type\s*=\s*"omfwd"[\s\S]*)({{ item[1][0] | regex_escape()
        }}\s*=\s*"\S*")([\s\S]*\))$
      replace: \1{{ item[1][0] }}="{{ item[1][1] }}"\3
    loop: '{{ rsyslog_files | product (rsyslog_parameters_to_replace_if_wrong_value
      | zip(rsyslog_values_to_replace_if_wrong_value)) | list }}'

  - name: 'Configure TLS for rsyslog remote logging: Fix existing omfwd directives
      by adding parameter and value'
    ansible.builtin.replace:
      path: '{{ item[0] }}'
      regexp: (?i)^(\s*action\s*\(\s*type\s*=\s*"omfwd"(?:[\s\S](?!{{ item[1][0] |
        regex_escape() }}))*.)(\))$
      replace: \1 {{ item[1][0] }}="{{ item[1][1] }}" \2
    loop: '{{ rsyslog_files | product (rsyslog_parameters_to_add_if_missing | zip(rsyslog_values_to_add_if_missing))
      | list }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_includes_with_directive.matched or rsyslog_main_file_with_directive.matched
  tags:
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_remote_tls

- name: 'Configure TLS for rsyslog remote logging: Add missing rsyslog directive'
  ansible.builtin.lineinfile:
    dest: /etc/rsyslog.conf
    line: action(type="omfwd" protocol="tcp" Target="{{ rsyslog_remote_loghost_address
      }}" port="6514" StreamDriver="gtls" StreamDriverMode="1" StreamDriverAuthMode="x509/name"
      streamdriver.CheckExtendedKeyPurpose="on")
    create: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - not rsyslog_includes_with_directive.matched and not rsyslog_main_file_with_directive.matched
  tags:
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_remote_tls

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

rsyslog_remote_loghost_address='logcollector'

params_to_add_if_missing=("protocol" "target" "port" "StreamDriver" "StreamDriverMode" "StreamDriverAuthMode" "streamdriver.CheckExtendedKeyPurpose")
values_to_add_if_missing=("tcp" "$rsyslog_remote_loghost_address" "6514" "gtls" "1" "x509/name" "on")
params_to_replace_if_wrong_value=("protocol" "StreamDriver" "StreamDriverMode" "StreamDriverAuthMode" "streamdriver.CheckExtendedKeyPurpose")
values_to_replace_if_wrong_value=("tcp" "gtls" "1" "x509/name" "on")

files_containing_omfwd=("$(grep -ilE '^[^#]*\s*action\s*\(\s*type\s*=\s*"omfwd".*' /etc/rsyslog.conf /etc/rsyslog.d/*.conf)")
if [ -n "${files_containing_omfwd[*]}" ]; then
    for file in "${files_containing_omfwd[@]}"; do
        for ((i=0; i<${#params_to_replace_if_wrong_value[@]}; i++)); do
            sed -i -E -e 'H;$!d;x;s/^\n//' -e "s|(\s*action\s*\(\s*type\s*=\s*[\"]omfwd[\"].*?)${params_to_replace_if_wrong_value[$i]}\s*=\s*[\"]\S*[\"](.*\))|\1${params_to_replace_if_wrong_value[$i]}=\"${values_to_replace_if_wrong_value[$i]}\"\2|gI" "$file"
        done
        for ((i=0; i<${#params_to_add_if_missing[@]}; i++)); do
            if ! grep -qPzi "(?s)\s*action\s*\(\s*type\s*=\s*[\"]omfwd[\"].*?${params_to_add_if_missing[$i]}.*?\).*" "$file"; then
                sed -i -E -e 'H;$!d;x;s/^\n//' -e "s|(\s*action\s*\(\s*type\s*=\s*[\"]omfwd[\"])|\1\n${params_to_add_if_missing[$i]}=\"${values_to_add_if_missing[$i]}\"|gI" "$file"
            fi
        done
    done
else
    echo "action(type=\"omfwd\" protocol=\"tcp\" Target=\"$rsyslog_remote_loghost_address\" port=\"6514\" StreamDriver=\"gtls\" StreamDriverMode=\"1\" StreamDriverAuthMode=\"x509/name\" streamdriver.CheckExtendedKeyPurpose=\"on\")"  >> /etc/rsyslog.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Configure CA certificate for rsyslog remote logging   [ref]

Configure CA certificate for rsyslog logging to remote server using Transport Layer Security (TLS) using correct path for the DefaultNetstreamDriverCAFile global option in /etc/rsyslog.conf, for example with the following command:
echo 'global(DefaultNetstreamDriverCAFile="/etc/pki/tls/cert.pem")' >> /etc/rsyslog.conf
Replace the /etc/pki/tls/cert.pem in the above command with the path to the file with CA certificate generated for the purpose of remote logging.
Warning:  Automatic remediation is not available as each organization has unique requirements.
Rationale:
The CA certificate needs to be set or rsyslog.service fails to start with
error: ca certificate is not set, cannot continue
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_rsyslog_remote_tls_cacert
References:
ism0988, 1405
osppFCS_TLSC_EXT.1
os-srgSRG-OS-000480-GPOS-00227
anssiR71

Rule   Ensure rsyslog is Installed   [ref]

Rsyslog is installed by default. The rsyslog package can be installed with the following command:
 $ sudo dnf install rsyslog
Rationale:
The rsyslog package provides the rsyslog daemon, which provides system logging services.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_rsyslog_installed
References:
cis-csc1, 14, 15, 16, 3, 5, 6
cobit5APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01
disaCCI-001311, CCI-001312, CCI-000366
hipaa164.312(a)(2)(ii)
isa-62443-20094.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4
isa-62443-2013SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9
iso27001-2013A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1
nistCM-6(a)
nist-csfPR.PT-1
osppFTP_ITC_EXT.1.1
os-srgSRG-OS-000479-GPOS-00224, SRG-OS-000051-GPOS-00024, SRG-OS-000480-GPOS-00227


[[packages]]
name = "rsyslog"
version = "*"

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Ensure rsyslog is installed
  package:
    name: rsyslog
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_rsyslog_installed

Complexity:low
Disruption:low
Reboot:false
Strategy:enable

package --add=rsyslog

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include install_rsyslog

class install_rsyslog {
  package { 'rsyslog':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "rsyslog" ; then
    dnf install -y "rsyslog"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable rsyslog Service   [ref]

The rsyslog service provides syslog-style logging by default on Red Hat Enterprise Linux 10. The rsyslog service can be enabled with the following command:
$ sudo systemctl enable rsyslog.service
Rationale:
The rsyslog service must be running in order to provide logging services, which are essential to system administration.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_service_rsyslog_enabled
References:
cis-csc1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9
cobit5APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO13.01, BAI03.05, BAI04.04, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01
disaCCI-001311, CCI-001312, CCI-001557, CCI-001851, CCI-000366
hipaa164.312(a)(2)(ii)
isa-62443-20094.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4
isa-62443-2013SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, SR 7.1, SR 7.2
iso27001-2013A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, A.17.2.1
nistCM-6(a), AU-4(1)
nist-csfDE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.DS-4, PR.PT-1
os-srgSRG-OS-000480-GPOS-00227


[customizations.services]
enabled = ["rsyslog"]

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Enable rsyslog Service - Enable service rsyslog
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Enable rsyslog Service - Enable Service rsyslog
    ansible.builtin.systemd:
      name: rsyslog
      enabled: true
      state: started
      masked: false
    when:
    - '"rsyslog" in ansible_facts.packages'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AU-4(1)
  - NIST-800-53-CM-6(a)
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_rsyslog_enabled

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include enable_rsyslog

class enable_rsyslog {
  service {'rsyslog':
    enable => true,
    ensure => 'running',
  }
}

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'rsyslog.service'
"$SYSTEMCTL_EXEC" start 'rsyslog.service'
"$SYSTEMCTL_EXEC" enable 'rsyslog.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Network Configuration and Firewalls   Group contains 7 groups and 8 rules
[ref]   Most systems must be connected to a network of some sort, and this brings with it the substantial risk of network attack. This section discusses the security impact of decisions about networking which must be made when configuring a system.

This section also discusses firewalls, network access controls, and other network security frameworks, which allow system-level rules to be written that can limit an attackers' ability to connect to your system. These rules can specify that network traffic should be allowed or denied from certain IP addresses, hosts, and networks. The rules can also specify which of the system's network services are available to particular hosts or networks.
Group   firewalld   Group contains 2 groups and 4 rules
[ref]   The dynamic firewall daemon firewalld provides a dynamically managed firewall with support for network “zones” to assign a level of trust to a network and its associated connections and interfaces. It has support for IPv4 and IPv6 firewall settings. It supports Ethernet bridges and has a separation of runtime and permanent configuration options. It also has an interface for services or applications to add firewall rules directly.
A graphical configuration tool, firewall-config, is used to configure firewalld, which in turn uses iptables tool to communicate with Netfilter in the kernel which implements packet filtering.
The firewall service provided by firewalld is dynamic rather than static because changes to the configuration can be made at anytime and are immediately implemented. There is no need to save or apply the changes. No unintended disruption of existing network connections occurs as no part of the firewall has to be reloaded.
Group   Inspect and Activate Default firewalld Rules   Group contains 2 rules
[ref]   Firewalls can be used to separate networks into different zones based on the level of trust the user has decided to place on the devices and traffic within that network. NetworkManager informs firewalld to which zone an interface belongs. An interface's assigned zone can be changed by NetworkManager or via the firewall-config tool.
The zone settings in /etc/firewalld/ are a range of preset settings which can be quickly applied to a network interface. These are the zones provided by firewalld sorted according to the default trust level of the zones from untrusted to trusted:
  • drop

    Any incoming network packets are dropped, there is no reply. Only outgoing network connections are possible.

  • block

    Any incoming network connections are rejected with an icmp-host-prohibited message for IPv4 and icmp6-adm-prohibited for IPv6. Only network connections initiated from within the system are possible.

  • public

    For use in public areas. You do not trust the other computers on the network to not harm your computer. Only selected incoming connections are accepted.

  • external

    For use on external networks with masquerading enabled especially for routers. You do not trust the other computers on the network to not harm your computer. Only selected incoming connections are accepted.

  • dmz

    For computers in your demilitarized zone that are publicly-accessible with limited access to your internal network. Only selected incoming connections are accepted.

  • work

    For use in work areas. You mostly trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted.

  • home

    For use in home areas. You mostly trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted.

  • internal

    For use on internal networks. You mostly trust the other computers on the networks to not harm your computer. Only selected incoming connections are accepted.

  • trusted

    All network connections are accepted.


It is possible to designate one of these zones to be the default zone. When interface connections are added to NetworkManager, they are assigned to the default zone. On installation, the default zone in firewalld is set to be the public zone.
To find out all the settings of a zone, for example the public zone, enter the following command as root:
# firewall-cmd --zone=public --list-all
Example output of this command might look like the following:
# firewall-cmd --zone=public --list-all
public
  interfaces:
  services: mdns dhcpv6-client ssh
  ports:
  forward-ports:
  icmp-blocks: source-quench
To view the network zones currently active, enter the following command as root:
# firewall-cmd --get-service
The following listing displays the result of this command on common Red Hat Enterprise Linux 10 system:
# firewall-cmd --get-service
amanda-client bacula bacula-client dhcp dhcpv6 dhcpv6-client dns ftp
high-availability http https imaps ipp ipp-client ipsec kerberos kpasswd
ldap ldaps libvirt libvirt-tls mdns mountd ms-wbt mysql nfs ntp openvpn
pmcd pmproxy pmwebapi pmwebapis pop3s postgresql proxy-dhcp radius rpc-bind
samba samba-client smtp ssh telnet tftp tftp-client transmission-client
vnc-server wbem-https
Finally to view the network zones that will be active after the next firewalld service reload, enter the following command as root:
# firewall-cmd --get-service --permanent

Rule   Install firewalld Package   [ref]

The firewalld package can be installed with the following command:
$ sudo dnf install firewalld
Rationale:
"Firewalld" provides an easy and effective way to block/limit remote access to the system via ports, services, and protocols. Remote access services, such as those providing remote access to network devices and information systems, which lack automated control capabilities, increase risk and make remote user access management difficult at best. Remote access is access to DoD nonpublic information systems by an authorized user (or an information system) communicating through an external, non-organization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless. Red Hat Enterprise Linux 10 functionality (e.g., SSH) must be capable of taking enforcement action if the audit reveals unauthorized activity. Automated control of remote access sessions allows organizations to ensure ongoing compliance with remote access policies by enforcing connection rules of remote access applications on a variety of information system components (e.g., servers, workstations, notebook computers, smartphones, and tablets)."
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_firewalld_installed
References:
disaCCI-002314
nistCM-6(a)
osppFMT_SMF_EXT.1
os-srgSRG-OS-000096-GPOS-00050, SRG-OS-000297-GPOS-00115, SRG-OS-000298-GPOS-00116, SRG-OS-000480-GPOS-00227, SRG-OS-000480-GPOS-00232
cis4.1.2
pcidss41.2.1


[[packages]]
name = "firewalld"
version = "*"

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Ensure firewalld is installed
  package:
    name: firewalld
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-1.2.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_firewalld_installed

Complexity:low
Disruption:low
Reboot:false
Strategy:enable

package --add=firewalld

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include install_firewalld

class install_firewalld {
  package { 'firewalld':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "firewalld" ; then
    dnf install -y "firewalld"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify firewalld Enabled   [ref]

The firewalld service can be enabled with the following command:
$ sudo systemctl enable firewalld.service
Rationale:
Access control methods provide the ability to enhance system security posture by restricting services and known good IP addresses and address ranges. This prevents connections from unknown hosts and protocols.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_service_firewalld_enabled
References:
cis-csc11, 3, 9
cobit5BAI10.01, BAI10.02, BAI10.03, BAI10.05
cui3.1.3, 3.4.7
disaCCI-000366, CCI-000382, CCI-002314
isa-62443-20094.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 7.6
iso27001-2013A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4
nerc-cipCIP-003-8 R4, CIP-003-8 R5, CIP-004-6 R3
nistAC-4, CM-7(b), CA-3(5), SC-7(21), CM-6(a)
nist-csfPR.IP-1
osppFMT_SMF_EXT.1
os-srgSRG-OS-000096-GPOS-00050, SRG-OS-000297-GPOS-00115, SRG-OS-000480-GPOS-00227, SRG-OS-000480-GPOS-00231, SRG-OS-000480-GPOS-00232
cis4.1.2
pcidss41.2.1


[customizations.services]
enabled = ["firewalld"]

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-171-3.1.3
  - NIST-800-171-3.4.7
  - NIST-800-53-AC-4
  - NIST-800-53-CA-3(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(21)
  - PCI-DSSv4-1.2.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_firewalld_enabled

- name: Verify firewalld Enabled - Enable service firewalld
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Verify firewalld Enabled - Enable Service firewalld
    ansible.builtin.systemd:
      name: firewalld
      enabled: true
      state: started
      masked: false
    when:
    - '"firewalld" in ansible_facts.packages'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"firewalld" in ansible_facts.packages'
  tags:
  - NIST-800-171-3.1.3
  - NIST-800-171-3.4.7
  - NIST-800-53-AC-4
  - NIST-800-53-CA-3(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(21)
  - PCI-DSSv4-1.2.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_firewalld_enabled

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include enable_firewalld

class enable_firewalld {
  service {'firewalld':
    enable => true,
    ensure => 'running',
  }
}

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q firewalld; }; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'firewalld.service'
"$SYSTEMCTL_EXEC" start 'firewalld.service'
"$SYSTEMCTL_EXEC" enable 'firewalld.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Strengthen the Default Ruleset   Group contains 2 rules
[ref]   The default rules can be strengthened. The system scripts that activate the firewall rules expect them to be defined in configuration files under the /etc/firewalld/services and /etc/firewalld/zones directories.

The following recommendations describe how to strengthen the default ruleset configuration file. An alternative to editing this configuration file is to create a shell script that makes calls to the firewall-cmd program to load in rules under the /etc/firewalld/services and /etc/firewalld/zones directories.

Instructions apply to both unless otherwise noted. Language and address conventions for regular firewalld rules are used throughout this section.
Warning:  The program firewall-config allows additional services to penetrate the default firewall rules and automatically adjusts the firewalld ruleset(s).

Rule   Configure the Firewalld Ports   [ref]

Configure the firewalld ports to allow approved services to have access to the system. To configure firewalld to open ports, run the following command:
firewall-cmd --permanent --add-port=port_number/tcp
         
To configure firewalld to allow access for pre-defined services, run the following command:
firewall-cmd --permanent --add-service=service_name
         
Rationale:
In order to prevent unauthorized connection of devices, unauthorized transfer of information, or unauthorized tunneling (i.e., embedding of data types within data types), organizations must disable or restrict unused or unnecessary physical and logical ports/protocols on information systems.

Operating systems are capable of providing a wide variety of functions and services. Some of the functions and services provided by default may not be necessary to support essential organizational operations. Additionally, it is sometimes convenient to provide multiple services from a single component (e.g., VPN and IPS); however, doing so increases risk over limiting the services provided by one component.

To support the requirements and principles of least functionality, the operating system must support the organizational requirements, providing only essential capabilities and limiting the use of ports, protocols, and/or services to only those required, authorized, and approved to conduct official business.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_configure_firewalld_ports
References:
cis-csc11, 12, 14, 15, 3, 8, 9
cobit5APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06
disaCCI-000382, CCI-002314
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
ism1416
iso27001-2013A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2
nistAC-4, CM-7(b), CA-3(5), SC-7(21), CM-6(a)
nist-csfPR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4
os-srgSRG-OS-000096-GPOS-00050, SRG-OS-000297-GPOS-00115
pcidss41.3.1

Rule   Set Default firewalld Zone for Incoming Packets   [ref]

To set the default zone to drop for the built-in default zone which processes incoming IPv4 and IPv6 packets, modify the following line in /etc/firewalld/firewalld.conf to be:
DefaultZone=drop
Warning:  To prevent denying any access to the system, automatic remediation of this control is not available. Remediation must be automated as a component of machine provisioning, or followed manually as outlined above.
Rationale:
In firewalld the default zone is applied only after all the applicable rules in the table are examined for a match. Setting the default zone to drop implements proper design for a firewall, i.e. any packets which are not explicitly permitted should not be accepted.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_firewalld_default_zone
References:
cis-csc11, 14, 3, 9
cjis5.10.1
cobit5BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
cui3.1.3, 3.4.7, 3.13.6
disaCCI-000366
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
ism1416
iso27001-2013A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nistCA-3(5), CM-7(b), SC-7(23), CM-6(a)
nist-csfPR.IP-1, PR.PT-3
osppFMT_MOF_EXT.1
pcidssReq-1.4
os-srgSRG-OS-000480-GPOS-00227
pcidss41.3.1
Group   IPv6   Group contains 1 group and 1 rule
[ref]   The system includes support for Internet Protocol version 6. A major and often-mentioned improvement over IPv4 is its enormous increase in the number of available addresses. Another important feature is its support for automatic configuration of many network settings.
Group   Configure IPv6 Settings if Necessary   Group contains 1 rule
[ref]   A major feature of IPv6 is the extent to which systems implementing it can automatically configure their networking devices using information from the network. From a security perspective, manually configuring important configuration information is preferable to accepting it from the network in an unauthenticated fashion.

Rule   Manually Assign Global IPv6 Address   [ref]

To manually assign an IP address for an interface, edit the file /etc/sysconfig/network-scripts/ifcfg-interface . Add or correct the following line (substituting the correct IPv6 address):
IPV6ADDR=2001:0DB8::ABCD/64
Manually assigning an IP address is preferable to accepting one from routers or from the network otherwise. The example address here is an IPv6 address reserved for documentation purposes, as defined by RFC3849.
Rationale:
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_network_ipv6_static_address
References:
disaCCI-000366
ism1315, 1319
Group   Wireless Networking   Group contains 1 group and 1 rule
[ref]   Wireless networking, such as 802.11 (WiFi) and Bluetooth, can present a security risk to sensitive or classified systems and networks. Wireless networking hardware is much more likely to be included in laptop or portable systems than in desktops or servers.

Removal of hardware provides the greatest assurance that the wireless capability remains disabled. Acquisition policies often include provisions to prevent the purchase of equipment that will be used in sensitive spaces and includes wireless capabilities. If it is impractical to remove the wireless hardware, and policy permits the device to enter sensitive spaces as long as wireless is disabled, efforts should instead focus on disabling wireless capability via software.
Group   Disable Wireless Through Software Configuration   Group contains 1 rule
[ref]   If it is impossible to remove the wireless hardware from the device in question, disable as much of it as possible through software. The following methods can disable software support for wireless networking, but note that these methods do not prevent malicious software or careless users from re-activating the devices.

Rule   Deactivate Wireless Network Interfaces   [ref]

Deactivating wireless network interfaces should prevent normal usage of the wireless capability.

Configure the system to disable all wireless network interfaces with the following command:
$ sudo nmcli radio all off
Rationale:
The use of wireless networking can introduce many different attack vectors into the organization's network. Common attack vectors such as malicious association and ad hoc networks will allow an attacker to spoof a wireless access point (AP), allowing validated systems to connect to the malicious AP and enabling the attacker to monitor and record network traffic. These malicious APs can also serve to create a man-in-the-middle attack or be used to create a denial of service to valid network resources.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_wireless_disable_interfaces
References:
cis-csc11, 12, 14, 15, 3, 8, 9
cobit5APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06
cui3.1.16
disaCCI-000085, CCI-002418, CCI-002421, CCI-001443, CCI-001444
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
ism1315, 1319
iso27001-2013A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2
nistAC-18(a), AC-18(3), CM-7(a), CM-7(b), CM-6(a), MP-7
nist-csfPR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4
pcidssReq-1.3.3
os-srgSRG-OS-000299-GPOS-00117, SRG-OS-000300-GPOS-00118, SRG-OS-000424-GPOS-00188, SRG-OS-000481-GPOS-000481
cis3.1.2
pcidss41.3.3

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-171-3.1.16
  - NIST-800-53-AC-18(3)
  - NIST-800-53-AC-18(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - PCI-DSS-Req-1.3.3
  - PCI-DSSv4-1.3.3
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy
  - wireless_disable_interfaces

- name: Service facts
  ansible.builtin.service_facts: null
  tags:
  - NIST-800-171-3.1.16
  - NIST-800-53-AC-18(3)
  - NIST-800-53-AC-18(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - PCI-DSS-Req-1.3.3
  - PCI-DSSv4-1.3.3
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy
  - wireless_disable_interfaces

- name: Ensure NetworkManager is installed
  ansible.builtin.package:
    name: '{{ item }}'
    state: present
  with_items:
  - NetworkManager
  tags:
  - NIST-800-171-3.1.16
  - NIST-800-53-AC-18(3)
  - NIST-800-53-AC-18(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - PCI-DSS-Req-1.3.3
  - PCI-DSSv4-1.3.3
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy
  - wireless_disable_interfaces

- name: NetworkManager Deactivate Wireless Network Interfaces
  command: nmcli radio wifi off
  when:
  - '''NetworkManager'' in ansible_facts.packages'
  - ansible_facts.services['NetworkManager.service'].state == 'running'
  tags:
  - NIST-800-171-3.1.16
  - NIST-800-53-AC-18(3)
  - NIST-800-53-AC-18(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - PCI-DSS-Req-1.3.3
  - PCI-DSSv4-1.3.3
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy
  - wireless_disable_interfaces


if ! rpm -q --quiet "NetworkManager" ; then
    dnf install -y "NetworkManager"
fi

if command -v nmcli >/dev/null 2>&1 && systemctl is-active NetworkManager >/dev/null 2>&1; then
    nmcli radio all off
fi

if command -v wicked >/dev/null 2>&1 && systemctl is-active wickedd >/dev/null 2>&1; then
  if [ -n "$(find /sys/class/net/*/ -type d -name wireless)" ]; then
    interfaces=$(find /sys/class/net/*/wireless -type d -name wireless | xargs -0 dirname | xargs basename)
    for iface in $interfaces; do
      wicked ifdown $iface
      sed -i 's/STARTMODE=.*/STARTMODE=off/' /etc/sysconfig/network/ifcfg-$iface
    done
  fi
fi

Rule   Prevent non-Privileged Users from Modifying Network Interfaces using nmcli   [ref]

By default, non-privileged users are given permissions to modify networking interfaces and configurations using the nmcli command. Non-privileged users should not be making configuration changes to network configurations. To ensure that non-privileged users do not have permissions to make changes to the network configuration using nmcli, create the following configuration in /etc/polkit-1/localauthority/20-org.d/10-nm-harden-access.pkla:
[Disable General User Access to NetworkManager]
Identity=default
Action=org.freedesktop.NetworkManager.*
ResultAny=no
ResultInactive=no
ResultActive=auth_admin
Rationale:
Allowing non-privileged users to make changes to network settings can allow untrusted access, prevent system availability, and/or can lead to a compromise or attack.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_network_nmcli_permissions
References:
cui3.1.16
ism0418, 1055, 1402
nistAC-18(4), CM-6(a)
pcidss41.2.8

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q polkit; then

printf "[Disable General User Access to NetworkManager]\nIdentity=default\nAction=org.freedesktop.NetworkManager.*\nResultAny=no\nResultInactive=no\nResultActive=auth_admin\n" > /etc/polkit-1/localauthority/20-org.d/10-nm-harden-access.pkla

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure System is Not Acting as a Network Sniffer   [ref]

The system should not be acting as a network sniffer, which can capture all traffic on the network to which it is connected. Run the following to determine if any interface is running in promiscuous mode:
$ ip link | grep PROMISC
Promiscuous mode of an interface can be disabled with the following command:
$ sudo ip link set dev device_name multicast off promisc off
Rationale:
Network interfaces in promiscuous mode allow for the capture of all network traffic visible to the system. If unauthorized individuals can access these applications, it may allow them to collect information such as logon IDs, passwords, and key exchanges between systems.

If the system is being used to perform a network troubleshooting function, the use of these tools must be documented with the Information Systems Security Manager (ISSM) and restricted to only authorized personnel.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_network_sniffer_disabled
References:
cis-csc1, 11, 14, 3, 9
cobit5APO11.06, APO12.06, BAI03.10, BAI09.01, BAI09.02, BAI09.03, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.05, DSS04.05, DSS05.02, DSS05.05, DSS06.06
disaCCI-000366
isa-62443-20094.2.3.4, 4.3.3.3.7, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, SR 7.8
iso27001-2013A.11.1.2, A.11.2.4, A.11.2.5, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.16.1.6, A.8.1.1, A.8.1.2, A.9.1.2
nistCM-7(a), CM-7(b), CM-6(a), CM-7(2), MA-3
nist-csfDE.DP-5, ID.AM-1, PR.IP-1, PR.MA-1, PR.PT-3
os-srgSRG-OS-000480-GPOS-00227
pcidss41.4.5

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Ensure System is Not Acting as a Network Sniffer - Gather network interfaces
  ansible.builtin.command:
    cmd: ip -o link show
  register: network_interfaces
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(2)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MA-3
  - PCI-DSSv4-1.4.5
  - low_complexity
  - low_disruption
  - medium_severity
  - network_sniffer_disabled
  - no_reboot_needed
  - restrict_strategy

- name: Ensure System is Not Acting as a Network Sniffer - Disable promiscuous mode
  ansible.builtin.command:
    cmd: ip link set dev {{ item.split(':')[1] }} multicast off promisc off
  loop: '{{ network_interfaces.stdout_lines }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - network_interfaces.stdout_lines is defined and "item.split(':') | length == 3"
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(2)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MA-3
  - PCI-DSSv4-1.4.5
  - low_complexity
  - low_disruption
  - medium_severity
  - network_sniffer_disabled
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

for interface in $(ip -o link show | cut -d ":" -f 2); do
    ip link set dev $interface multicast off promisc off
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   File Permissions and Masks   Group contains 5 groups and 19 rules
[ref]   Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which they should not have access.

Several of the commands in this section search filesystems for files or directories with certain characteristics, and are intended to be run on every local partition on a given system. When the variable PART appears in one of the commands below, it means that the command is intended to be run repeatedly, with the name of each local partition substituted for PART in turn.

The following command prints a list of all xfs partitions on the local system, which is the default filesystem for Red Hat Enterprise Linux 10 installations:
$ mount -t xfs | awk '{print $3}'
For any systems that use a different local filesystem type, modify this command as appropriate.
Group   Verify Permissions on Important Files and Directories   Group contains 1 group and 8 rules
[ref]   Permissions for many files on a system must be set restrictively to ensure sensitive information is properly protected. This section discusses important permission restrictions which can be verified to ensure that no harmful discrepancies have arisen.
Group   Verify File Permissions Within Some Important Directories   Group contains 4 rules
[ref]   Some directories contain files whose confidentiality or integrity is notably important and may also be susceptible to misconfiguration over time, particularly if unpackaged software is installed. As such, an argument exists to verify that files' permissions within these directories remain configured correctly and restrictively.

Rule   Verify that System Executables Have Root Ownership   [ref]

System executables are stored in the following directories by default:
/bin
/sbin
/usr/bin
/usr/libexec
/usr/local/bin
/usr/local/sbin
/usr/sbin
All files in these directories should be owned by the root user. If any file FILE in these directories is found to be owned by a user other than root, correct its ownership with the following command:
$ sudo chown root FILE
         
Rationale:
System binaries are executed by privileged users as well as system services, and restrictive permissions are necessary to ensure that their execution of these programs cannot be co-opted.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_ownership_binary_dirs
References:
cis-csc12, 13, 14, 15, 16, 18, 3, 5
cobit5APO01.06, DSS05.04, DSS05.07, DSS06.02
disaCCI-001499
isa-62443-20094.3.3.7.3
isa-62443-2013SR 2.1, SR 5.2
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistCM-5(6), CM-5(6).1, CM-6(a), AC-6(1)
nist-csfPR.AC-4, PR.DS-5
os-srgSRG-OS-000259-GPOS-00100
anssiR50

Complexity:medium
Disruption:medium
Reboot:false
Strategy:restrict
- name: Read list of system executables without root ownership
  command: find /bin/ /usr/bin/ /usr/local/bin/ /sbin/ /usr/sbin/ /usr/local/sbin/
    /usr/libexec \! -user root
  register: no_root_system_executables
  changed_when: false
  failed_when: false
  check_mode: false
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - file_ownership_binary_dirs
  - medium_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set ownership to root of system executables
  file:
    path: '{{ item }}'
    owner: root
  with_items: '{{ no_root_system_executables.stdout_lines }}'
  when: no_root_system_executables.stdout_lines | length > 0
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - file_ownership_binary_dirs
  - medium_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

find /bin/ \
/usr/bin/ \
/usr/local/bin/ \
/sbin/ \
/usr/sbin/ \
/usr/local/sbin/ \
/usr/libexec \
\! -user root -execdir chown root {} \;

Rule   Verify that Shared Library Files Have Root Ownership   [ref]

System-wide shared library files, which are linked to executables during process load time or run time, are stored in the following directories by default:
/lib
/lib64
/usr/lib
/usr/lib64
Kernel modules, which can be added to the kernel during runtime, are also stored in /lib/modules. All files in these directories should be owned by the root user. If the directory, or any file in these directories, is found to be owned by a user other than root correct its ownership with the following command:
$ sudo chown root FILE
         
Rationale:
Files from shared library directories are loaded into the address space of processes (including privileged ones) or of the kernel itself at runtime. Proper ownership is necessary to protect the integrity of the system.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_ownership_library_dirs
References:
cis-csc12, 13, 14, 15, 16, 18, 3, 5
cobit5APO01.06, DSS05.04, DSS05.07, DSS06.02
disaCCI-001499
isa-62443-20094.3.3.7.3
isa-62443-2013SR 2.1, SR 5.2
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistCM-5(6), CM-5(6).1, CM-6(a), AC-6(1)
nist-csfPR.AC-4, PR.DS-5
os-srgSRG-OS-000259-GPOS-00100

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Find /lib/ file(s) matching ^.*$ recursively
  command: find -H /lib/  -type f ! -uid 0 -regextype posix-extended -regex "^.*$"
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_ownership_library_dirs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner on /lib/ file(s) matching ^.*$
  file:
    path: '{{ item }}'
    owner: '0'
    state: file
  with_items:
  - '{{ files_found.stdout_lines }}'
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_ownership_library_dirs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Find /lib64/ file(s) matching ^.*$ recursively
  command: find -H /lib64/  -type f ! -uid 0 -regextype posix-extended -regex "^.*$"
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_ownership_library_dirs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner on /lib64/ file(s) matching ^.*$
  file:
    path: '{{ item }}'
    owner: '0'
    state: file
  with_items:
  - '{{ files_found.stdout_lines }}'
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_ownership_library_dirs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Find /usr/lib/ file(s) matching ^.*$ recursively
  command: find -H /usr/lib/  -type f ! -uid 0 -regextype posix-extended -regex "^.*$"
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_ownership_library_dirs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner on /usr/lib/ file(s) matching ^.*$
  file:
    path: '{{ item }}'
    owner: '0'
    state: file
  with_items:
  - '{{ files_found.stdout_lines }}'
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_ownership_library_dirs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Find /usr/lib64/ file(s) matching ^.*$ recursively
  command: find -H /usr/lib64/  -type f ! -uid 0 -regextype posix-extended -regex
    "^.*$"
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_ownership_library_dirs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner on /usr/lib64/ file(s) matching ^.*$
  file:
    path: '{{ item }}'
    owner: '0'
    state: file
  with_items:
  - '{{ files_found.stdout_lines }}'
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_ownership_library_dirs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:false
Strategy:configure

find /lib/  -type f ! -uid 0 -regextype posix-extended -regex '^.*$' -exec chown 0 {} \;

find /lib64/  -type f ! -uid 0 -regextype posix-extended -regex '^.*$' -exec chown 0 {} \;

find /usr/lib/  -type f ! -uid 0 -regextype posix-extended -regex '^.*$' -exec chown 0 {} \;

find /usr/lib64/  -type f ! -uid 0 -regextype posix-extended -regex '^.*$' -exec chown 0 {} \;

Rule   Verify that System Executables Have Restrictive Permissions   [ref]

System executables are stored in the following directories by default:
/bin
/sbin
/usr/bin
/usr/libexec
/usr/local/bin
/usr/local/sbin
/usr/sbin
All files in these directories should not be group-writable or world-writable. If any file FILE in these directories is found to be group-writable or world-writable, correct its permission with the following command:
$ sudo chmod go-w FILE
         
Rationale:
System binaries are executed by privileged users, as well as system services, and restrictive permissions are necessary to ensure execution of these programs cannot be co-opted.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_binary_dirs
References:
cis-csc12, 13, 14, 15, 16, 18, 3, 5
cobit5APO01.06, DSS05.04, DSS05.07, DSS06.02
disaCCI-001499
isa-62443-20094.3.3.7.3
isa-62443-2013SR 2.1, SR 5.2
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistCM-5(6), CM-5(6).1, CM-6(a), AC-6(1)
nist-csfPR.AC-4, PR.DS-5
os-srgSRG-OS-000259-GPOS-00100
anssiR50

Complexity:medium
Disruption:medium
Reboot:false
Strategy:restrict
- name: Read list of world and group writable system executables
  ansible.builtin.command: find /bin /usr/bin /usr/local/bin /sbin /usr/sbin /usr/local/sbin
    /usr/libexec -perm /022 -type f
  register: world_writable_library_files
  changed_when: false
  failed_when: false
  check_mode: false
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - file_permissions_binary_dirs
  - medium_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Remove world/group writability of system executables
  ansible.builtin.file:
    path: '{{ item }}'
    mode: go-w
    state: file
  with_items: '{{ world_writable_library_files.stdout_lines }}'
  when: world_writable_library_files.stdout_lines | length > 0
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - file_permissions_binary_dirs
  - medium_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

DIRS="/bin /usr/bin /usr/local/bin /sbin /usr/sbin /usr/local/sbin /usr/libexec"
for dirPath in $DIRS; do
	find "$dirPath" -perm /022 -exec chmod go-w '{}' \;
done

Rule   Verify that Shared Library Files Have Restrictive Permissions   [ref]

System-wide shared library files, which are linked to executables during process load time or run time, are stored in the following directories by default:
/lib
/lib64
/usr/lib
/usr/lib64
Kernel modules, which can be added to the kernel during runtime, are stored in /lib/modules. All files in these directories should not be group-writable or world-writable. If any file in these directories is found to be group-writable or world-writable, correct its permission with the following command:
$ sudo chmod go-w FILE
         
Rationale:
Files from shared library directories are loaded into the address space of processes (including privileged ones) or of the kernel itself at runtime. Restrictive permissions are necessary to protect the integrity of the system.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_library_dirs
References:
cis-csc12, 13, 14, 15, 16, 18, 3, 5
cobit5APO01.06, DSS05.04, DSS05.07, DSS06.02
disaCCI-001499
isa-62443-20094.3.3.7.3
isa-62443-2013SR 2.1, SR 5.2
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistCM-6(a), CM-5(6), CM-5(6).1, AC-6(1)
nist-csfPR.AC-4, PR.DS-5
os-srgSRG-OS-000259-GPOS-00100

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Find /lib/ file(s) recursively
  command: find -H /lib/  -perm /g+w,o+w  -type f -regextype posix-extended -regex
    "^.*$"
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_library_dirs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set permissions for /lib/ file(s)
  file:
    path: '{{ item }}'
    mode: g-w,o-w
    state: file
  with_items:
  - '{{ files_found.stdout_lines }}'
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_library_dirs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Find /lib64/ file(s) recursively
  command: find -H /lib64/  -perm /g+w,o+w  -type f -regextype posix-extended -regex
    "^.*$"
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_library_dirs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set permissions for /lib64/ file(s)
  file:
    path: '{{ item }}'
    mode: g-w,o-w
    state: file
  with_items:
  - '{{ files_found.stdout_lines }}'
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_library_dirs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Find /usr/lib/ file(s) recursively
  command: find -H /usr/lib/  -perm /g+w,o+w  -type f -regextype posix-extended -regex
    "^.*$"
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_library_dirs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set permissions for /usr/lib/ file(s)
  file:
    path: '{{ item }}'
    mode: g-w,o-w
    state: file
  with_items:
  - '{{ files_found.stdout_lines }}'
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_library_dirs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Find /usr/lib64/ file(s) recursively
  command: find -H /usr/lib64/  -perm /g+w,o+w  -type f -regextype posix-extended
    -regex "^.*$"
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_library_dirs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set permissions for /usr/lib64/ file(s)
  file:
    path: '{{ item }}'
    mode: g-w,o-w
    state: file
  with_items:
  - '{{ files_found.stdout_lines }}'
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-5(6)
  - NIST-800-53-CM-5(6).1
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_library_dirs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:false
Strategy:configure





find -H /lib/  -perm /g+w,o+w  -type f -regextype posix-extended -regex '^.*$' -exec chmod g-w,o-w {} \;

find -H /lib64/  -perm /g+w,o+w  -type f -regextype posix-extended -regex '^.*$' -exec chmod g-w,o-w {} \;

find -H /usr/lib/  -perm /g+w,o+w  -type f -regextype posix-extended -regex '^.*$' -exec chmod g-w,o-w {} \;

find -H /usr/lib64/  -perm /g+w,o+w  -type f -regextype posix-extended -regex '^.*$' -exec chmod g-w,o-w {} \;

Rule   Verify that All World-Writable Directories Have Sticky Bits Set   [ref]

When the so-called 'sticky bit' is set on a directory, only the owner of a given file may remove that file from the directory. Without the sticky bit, any user with write access to a directory may remove any file in the directory. Setting the sticky bit prevents users from removing each other's files. In cases where there is no reason for a directory to be world-writable, a better solution is to remove that permission rather than to set the sticky bit. However, if a directory is used by a particular application, consult that application's documentation instead of blindly changing modes.
To set the sticky bit on a world-writable directory DIR, run the following command:
$ sudo chmod +t DIR
        
Warning:  This rule can take a long time to perform the check and might consume a considerable amount of resources depending on the number of directories present on the system. It is not a problem in most cases, but especially systems with a large number of directories can be affected. See https://access.redhat.com/articles/6999111.
Rationale:
Failing to set the sticky bit on public directories allows unauthorized users to delete files in the directory structure.

The only authorized public directories are those temporary directories supplied with the system, or those designed to be temporary file repositories. The setting is normally reserved for directories used by the system, by users for temporary file storage (such as /tmp), and for directories requiring global read/write access.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_dir_perms_world_writable_sticky_bits
References:
cis-csc12, 13, 14, 15, 16, 18, 3, 5
cobit5APO01.06, DSS05.04, DSS05.07, DSS06.02
disaCCI-001090
isa-62443-20094.3.3.7.3
isa-62443-2013SR 2.1, SR 5.2
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistCM-6(a), AC-6(1)
nist-csfPR.AC-4, PR.DS-5
os-srgSRG-OS-000138-GPOS-00069
anssiR54
cis7.1.11
pcidss42.2.6

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Verify that All World-Writable Directories Have Sticky Bits Set - Define Excluded
    (Non-Local) File Systems and Paths
  ansible.builtin.set_fact:
    excluded_fstypes:
    - afs
    - ceph
    - cifs
    - smb3
    - smbfs
    - sshfs
    - ncpfs
    - ncp
    - nfs
    - nfs4
    - gfs
    - gfs2
    - glusterfs
    - gpfs
    - pvfs2
    - ocfs2
    - lustre
    - davfs
    - fuse.sshfs
    excluded_paths:
    - dev
    - proc
    - run
    - sys
    search_paths: []
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - dir_perms_world_writable_sticky_bits
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Verify that All World-Writable Directories Have Sticky Bits Set - Find Relevant
    Root Directories Ignoring Pre-Defined Excluded Paths
  ansible.builtin.find:
    paths: /
    file_type: directory
    excludes: '{{ excluded_paths }}'
    hidden: true
    recurse: false
  register: result_relevant_root_dirs
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - dir_perms_world_writable_sticky_bits
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Verify that All World-Writable Directories Have Sticky Bits Set - Include
    Relevant Root Directories in a List of Paths to be Searched
  ansible.builtin.set_fact:
    search_paths: '{{ search_paths | union([item.path]) }}'
  loop: '{{ result_relevant_root_dirs.files }}'
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - dir_perms_world_writable_sticky_bits
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Verify that All World-Writable Directories Have Sticky Bits Set - Increment
    Search Paths List with Local Partitions Mount Points
  ansible.builtin.set_fact:
    search_paths: '{{ search_paths | union([item.mount]) }}'
  loop: '{{ ansible_mounts }}'
  when:
  - item.fstype not in excluded_fstypes
  - item.mount != '/'
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - dir_perms_world_writable_sticky_bits
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Verify that All World-Writable Directories Have Sticky Bits Set - Increment
    Search Paths List with Local NFS File System Targets
  ansible.builtin.set_fact:
    search_paths: '{{ search_paths | union([