Guide to the Secure Configuration of Red Hat Enterprise Linux 8

with profile CIS Red Hat Enterprise Linux 8 Benchmark for Level 1 - Server
This profile defines a baseline that aligns to the "Level 1 - Server" configuration from the Center for Internet Security® Red Hat Enterprise Linux 8 Benchmark™, v2.0.0, released 2022-02-23. This profile includes Center for Internet Security® Red Hat Enterprise Linux 8 CIS Benchmarks™ content.
This guide presents a catalog of security-relevant configuration settings for Red Hat Enterprise Linux 8. It is a rendering of content structured in the eXtensible Configuration Checklist Description Format (XCCDF) in order to support security automation. The SCAP content is is available in the scap-security-guide package which is developed at https://www.open-scap.org/security-policies/scap-security-guide.

Providing system administrators with such guidance informs them how to securely configure systems under their control in a variety of network roles. Policy makers and baseline creators can use this catalog of settings, with its associated references to higher-level security control catalogs, in order to assist them in security baseline creation. This guide is a catalog, not a checklist, and satisfaction of every item is not likely to be possible or sensible in many operational scenarios. However, the XCCDF format enables granular selection and adjustment of settings, and their association with OVAL and OCIL content provides an automated checking capability. Transformations of this document, and its associated automated checking content, are capable of providing baselines that meet a diverse set of policy objectives. Some example XCCDF Profiles, which are selections of items that form checklists and can be used as baselines, are available with this guide. They can be processed, in an automated fashion, with tools that support the Security Content Automation Protocol (SCAP). The DISA STIG, which provides required settings for US Department of Defense systems, is one example of a baseline created from this guidance.
Do not attempt to implement any of the settings in this guide without first testing them in a non-operational environment. The creators of this guidance assume no responsibility whatsoever for its use by other parties, and makes no guarantees, expressed or implied, about its quality, reliability, or any other characteristic.

Profile Information

Profile TitleCIS Red Hat Enterprise Linux 8 Benchmark for Level 1 - Server
Profile IDxccdf_org.ssgproject.content_profile_cis_server_l1

CPE Platforms

  • cpe:/o:redhat:enterprise_linux:8.0
  • cpe:/o:redhat:enterprise_linux:8.1
  • cpe:/o:redhat:enterprise_linux:8.10
  • cpe:/o:redhat:enterprise_linux:8.2
  • cpe:/o:redhat:enterprise_linux:8.3
  • cpe:/o:redhat:enterprise_linux:8.4
  • cpe:/o:redhat:enterprise_linux:8.5
  • cpe:/o:redhat:enterprise_linux:8.6
  • cpe:/o:redhat:enterprise_linux:8.7
  • cpe:/o:redhat:enterprise_linux:8.8
  • cpe:/o:redhat:enterprise_linux:8.9
  • cpe:/o:redhat:enterprise_linux:8

Revision History

Current version: 0.1.71

  • draft (as of 2023-10-04)

Table of Contents

  1. System Settings
    1. Installing and Maintaining Software
    2. Account and Access Control
    3. GRUB2 bootloader configuration
    4. Configure Syslog
    5. Network Configuration and Firewalls
    6. File Permissions and Masks
    7. SELinux
  2. Services
    1. Avahi Server
    2. Cron and At Daemons
    3. DHCP
    4. DNS Server
    5. FTP Server
    6. Web Server
    7. IMAP and POP3 Server
    8. LDAP
    9. Mail Server Software
    10. NFS and RPC
    11. Network Time Protocol
    12. Obsolete Services
    13. Print Support
    14. Proxy Server
    15. Samba(SMB) Microsoft Windows File Sharing Server
    16. SNMP Server
    17. SSH Server
    18. X Window System

Checklist

Group   Guide to the Secure Configuration of Red Hat Enterprise Linux 8   Group contains 105 groups and 283 rules
Group   System Settings   Group contains 59 groups and 201 rules
[ref]   Contains rules that check correct system settings.
Group   Installing and Maintaining Software   Group contains 10 groups and 16 rules
[ref]   The following sections contain information on security-relevant choices during the initial operating system installation process and the setup of software updates.
Group   System and Software Integrity   Group contains 3 groups and 5 rules
[ref]   System and software integrity can be gained by installing antivirus, increasing system encryption strength with FIPS, verifying installed software, enabling SELinux, installing an Intrusion Prevention System, etc. However, installing or enabling integrity checking tools cannot prevent intrusions, but they can detect that an intrusion may have occurred. Requirements for integrity checking may be highly dependent on the environment in which the system will be used. Snapshot-based approaches such as AIDE may induce considerable overhead in the presence of frequent software updates.
Group   Software Integrity Checking   Group contains 1 group and 3 rules
[ref]   Both the AIDE (Advanced Intrusion Detection Environment) software and the RPM package management system provide mechanisms for verifying the integrity of installed software. AIDE uses snapshots of file metadata (such as hashes) and compares these to current system files in order to detect changes.

The RPM package management system can conduct integrity checks by comparing information in its metadata database with files installed on the system.
Group   Verify Integrity with AIDE   Group contains 3 rules
[ref]   AIDE conducts integrity checks by comparing information about files with previously-gathered information. Ideally, the AIDE database is created immediately after initial system configuration, and then again after any software update. AIDE is highly configurable, with further configuration information located in /usr/share/doc/aide-VERSION.

Rule   Install AIDE   [ref]

The aide package can be installed with the following command:
$ sudo yum install aide
Rationale:
The AIDE package must be installed if it is to be available for integrity checking.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_aide_installed
Identifiers and References

Identifiers:  CCE-80844-4

References:  BP28(R51), 1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9, 5.10.1.3, APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06, CCI-002696, CCI-002699, CCI-001744, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6, 1034, 1288, 1341, 1417, A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3, CM-6(a), DE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3, Req-11.5, 11.5.2, SRG-OS-000445-GPOS-00199, RHEL-08-010359, 1.3.1, SV-251710r880730_rule


Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include install_aide

class install_aide {
  package { 'aide':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Reboot:false
Strategy:enable

package --add=aide


[[packages]]
name = "aide"
version = "*"

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "aide" ; then
    yum install -y "aide"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Ensure aide is installed
  package:
    name: aide
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-80844-4
  - CJIS-5.10.1.3
  - DISA-STIG-RHEL-08-010359
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_aide_installed

Rule   Build and Test AIDE Database   [ref]

Run the following command to generate a new database:
$ sudo /usr/sbin/aide --init
By default, the database will be written to the file /var/lib/aide/aide.db.new.gz. Storing the database, the configuration file /etc/aide.conf, and the binary /usr/sbin/aide (or hashes of these files), in a secure location (such as on read-only media) provides additional assurance about their integrity. The newly-generated database can be installed as follows:
$ sudo cp /var/lib/aide/aide.db.new.gz /var/lib/aide/aide.db.gz
To initiate a manual check, run the following command:
$ sudo /usr/sbin/aide --check
If this check produces any unexpected output, investigate.
Rationale:
For AIDE to be effective, an initial database of "known-good" information about files must be captured and it should be able to be verified against the installed files.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_aide_build_database
Identifiers and References

Identifiers:  CCE-80675-2

References:  BP28(R51), 1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9, 5.10.1.3, APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3, CM-6(a), DE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3, Req-11.5, 11.5.2, SRG-OS-000445-GPOS-00199, RHEL-08-010359, 1.3.1, SV-251710r880730_rule


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "aide" ; then
    yum install -y "aide"
fi

/usr/sbin/aide --init
/bin/cp -p /var/lib/aide/aide.db.new.gz /var/lib/aide/aide.db.gz

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Build and Test AIDE Database - Ensure AIDE Is Installed
  ansible.builtin.package:
    name: '{{ item }}'
    state: present
  with_items:
  - aide
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-80675-2
  - CJIS-5.10.1.3
  - DISA-STIG-RHEL-08-010359
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Build and Test AIDE Database
  ansible.builtin.command: /usr/sbin/aide --init
  changed_when: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-80675-2
  - CJIS-5.10.1.3
  - DISA-STIG-RHEL-08-010359
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Check Whether the Stock AIDE Database Exists
  ansible.builtin.stat:
    path: /var/lib/aide/aide.db.new.gz
  register: aide_database_stat
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-80675-2
  - CJIS-5.10.1.3
  - DISA-STIG-RHEL-08-010359
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Stage AIDE Database
  ansible.builtin.copy:
    src: /var/lib/aide/aide.db.new.gz
    dest: /var/lib/aide/aide.db.gz
    backup: true
    remote_src: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - (aide_database_stat.stat.exists is defined and aide_database_stat.stat.exists)
  tags:
  - CCE-80675-2
  - CJIS-5.10.1.3
  - DISA-STIG-RHEL-08-010359
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Rule   Configure Periodic Execution of AIDE   [ref]

At a minimum, AIDE should be configured to run a weekly scan. To implement a daily execution of AIDE at 4:05am using cron, add the following line to /etc/crontab:
05 4 * * * root /usr/sbin/aide --check
To implement a weekly execution of AIDE at 4:05am using cron, add the following line to /etc/crontab:
05 4 * * 0 root /usr/sbin/aide --check
AIDE can be executed periodically through other means; this is merely one example. The usage of cron's special time codes, such as @daily and @weekly is acceptable.
Rationale:
By default, AIDE does not install itself for periodic execution. Periodically running AIDE is necessary to reveal unexpected changes in installed files.

Unauthorized changes to the baseline configuration could make the system vulnerable to various attacks or allow unauthorized access to the operating system. Changes to operating system configurations can have unintended side effects, some of which may be relevant to security.

Detecting such changes and providing an automated response can help avoid unintended, negative consequences that could ultimately affect the security state of the operating system. The operating system's Information Management Officer (IMO)/Information System Security Officer (ISSO) and System Administrators (SAs) must be notified via email and/or monitoring system trap when there is an unauthorized modification of a configuration item.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_aide_periodic_cron_checking
Identifiers and References

Identifiers:  CCE-80676-0

References:  BP28(R51), 1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9, 5.10.1.3, APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06, CCI-001744, CCI-002699, CCI-002702, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3, SI-7, SI-7(1), CM-6(a), DE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3, Req-11.5, 11.5.2, SRG-OS-000363-GPOS-00150, SRG-OS-000446-GPOS-00200, SRG-OS-000447-GPOS-00201, 1.3.2


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "aide" ; then
    yum install -y "aide"
fi

if ! grep -q "/usr/sbin/aide --check" /etc/crontab ; then
    echo "05 4 * * * root /usr/sbin/aide --check" >> /etc/crontab
else
    sed -i '\!^.* --check.*$!d' /etc/crontab
    echo "05 4 * * * root /usr/sbin/aide --check" >> /etc/crontab
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Ensure AIDE is installed
  package:
    name: '{{ item }}'
    state: present
  with_items:
  - aide
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-80676-0
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set cron package name - RedHat
  set_fact:
    cron_pkg_name: cronie
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_os_family == "RedHat" or ansible_os_family == "Suse"
  tags:
  - CCE-80676-0
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set cron package name - Debian
  set_fact:
    cron_pkg_name: cron
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_os_family == "Debian"
  tags:
  - CCE-80676-0
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Install cron
  package:
    name: '{{ cron_pkg_name }}'
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-80676-0
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure Periodic Execution of AIDE
  cron:
    name: run AIDE check
    minute: 5
    hour: 4
    weekday: 0
    user: root
    job: /usr/sbin/aide --check
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-80676-0
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
Group   System Cryptographic Policies   Group contains 2 rules
[ref]   Linux has the capability to centrally configure cryptographic polices. The command update-crypto-policies is used to set the policy applicable for the various cryptographic back-ends, such as SSL/TLS libraries. The configured cryptographic policies will be the default policy used by these backends unless the application user configures them otherwise. When the system has been configured to use the centralized cryptographic policies, the administrator is assured that any application that utilizes the supported backends will follow a policy that adheres to the configured profile. Currently the supported backends are:
  • GnuTLS library
  • OpenSSL library
  • NSS library
  • OpenJDK
  • Libkrb5
  • BIND
  • OpenSSH
Applications and languages which rely on any of these backends will follow the system policies as well. Examples are apache httpd, nginx, php, and others.

Rule   Configure System Cryptography Policy   [ref]

To configure the system cryptography policy to use ciphers only from the DEFAULT policy, run the following command:
$ sudo update-crypto-policies --set DEFAULT
The rule checks if settings for selected crypto policy are configured as expected. Configuration files in the /etc/crypto-policies/back-ends are either symlinks to correct files provided by Crypto-policies package or they are regular files in case crypto policy customizations are applied. Crypto policies may be customized by crypto policy modules, in which case it is delimited from the base policy using a colon.
Warning:  The system needs to be rebooted for these changes to take effect.
Warning:  System Crypto Modules must be provided by a vendor that undergoes FIPS-140 certifications. FIPS-140 is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf To meet this, the system has to have cryptographic software provided by a vendor that has undergone this certification. This means providing documentation, test results, design information, and independent third party review by an accredited lab. While open source software is capable of meeting this, it does not meet FIPS-140 unless the vendor submits to this process.
Rationale:
Centralized cryptographic policies simplify applying secure ciphers across an operating system and the applications that run on that operating system. Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_configure_crypto_policy
Identifiers and References

Identifiers:  CCE-80935-0

References:  164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.312(e)(1), 164.312(e)(2)(ii), 1446, CIP-003-8 R4.2, CIP-007-3 R5.1, CIP-007-3 R7.1, AC-17(a), AC-17(2), CM-6(a), MA-4(6), SC-13, SC-12(2), SC-12(3), FCS_COP.1(1), FCS_COP.1(2), FCS_COP.1(3), FCS_COP.1(4), FCS_CKM.1, FCS_CKM.2, FCS_TLSC_EXT.1, SRG-OS-000396-GPOS-00176, SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174, RHEL-08-010020, 1.10, 1.11, SV-230223r877398_rule



var_system_crypto_policy='DEFAULT'


stderr_of_call=$(update-crypto-policies --set ${var_system_crypto_policy} 2>&1 > /dev/null)
rc=$?

if test "$rc" = 127; then
	echo "$stderr_of_call" >&2
	echo "Make sure that the script is installed on the remediated system." >&2
	echo "See output of the 'dnf provides update-crypto-policies' command" >&2
	echo "to see what package to (re)install" >&2

	false  # end with an error code
elif test "$rc" != 0; then
	echo "Error invoking the update-crypto-policies script: $stderr_of_call" >&2
	false  # end with an error code
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    systemd:
      units:
        - name: configure-crypto-policy.service
          enabled: true
          contents: |
            [Unit]
            Before=kubelet.service
            [Service]
            Type=oneshot
            ExecStart=update-crypto-policies --set {{.var_system_crypto_policy}}
            RemainAfterExit=yes
            [Install]
            WantedBy=multi-user.target

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value var_system_crypto_policy # promote to variable
  set_fact:
    var_system_crypto_policy: !!str DEFAULT
  tags:
    - always

- name: Configure System Cryptography Policy
  lineinfile:
    path: /etc/crypto-policies/config
    regexp: ^(?!#)(\S+)$
    line: '{{ var_system_crypto_policy }}'
    create: true
  tags:
  - CCE-80935-0
  - DISA-STIG-RHEL-08-010020
  - NIST-800-53-AC-17(2)
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-MA-4(6)
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - configure_crypto_policy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - restrict_strategy

- name: Verify that Crypto Policy is Set (runtime)
  command: /usr/bin/update-crypto-policies --set {{ var_system_crypto_policy }}
  tags:
  - CCE-80935-0
  - DISA-STIG-RHEL-08-010020
  - NIST-800-53-AC-17(2)
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-MA-4(6)
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - configure_crypto_policy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - restrict_strategy

Rule   Configure SSH to use System Crypto Policy   [ref]

Crypto Policies provide a centralized control over crypto algorithms usage of many packages. SSH is supported by crypto policy, but the SSH configuration may be set up to ignore it. To check that Crypto Policies settings are configured correctly, ensure that the CRYPTO_POLICY variable is either commented or not set at all in the /etc/sysconfig/sshd.
Rationale:
Overriding the system crypto policy makes the behavior of the SSH service violate expectations, and makes system configuration more fragmented.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_configure_ssh_crypto_policy
Identifiers and References

Identifiers:  CCE-80939-2

References:  CCI-001453, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.312(e)(1), 164.312(e)(2)(ii), CIP-003-8 R4.2, CIP-007-3 R5.1, CIP-007-3 R7.1, AC-17(a), AC-17(2), CM-6(a), MA-4(6), SC-13, FCS_SSH_EXT.1, FCS_SSHS_EXT.1, FCS_SSHC_EXT.1, Req-2.2, 2.2, SRG-OS-000250-GPOS-00093, RHEL-08-010287, 5.2.14, SV-244526r877394_rule



SSH_CONF="/etc/sysconfig/sshd"

sed -i "/^\s*CRYPTO_POLICY.*$/Id" $SSH_CONF

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Configure SSH to use System Crypto Policy
  lineinfile:
    dest: /etc/sysconfig/sshd
    state: absent
    regexp: ^(?i)\s*CRYPTO_POLICY.*$
  tags:
  - CCE-80939-2
  - DISA-STIG-RHEL-08-010287
  - NIST-800-53-AC-17(2)
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-MA-4(6)
  - NIST-800-53-SC-13
  - PCI-DSS-Req-2.2
  - PCI-DSSv4-2.2
  - configure_ssh_crypto_policy
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
Group   Disk Partitioning   Group contains 1 rule
[ref]   To ensure separation and protection of data, there are top-level system directories which should be placed on their own physical partition or logical volume. The installer's default partitioning scheme creates separate logical volumes for /, /boot, and swap.
  • If starting with any of the default layouts, check the box to \"Review and modify partitioning.\" This allows for the easy creation of additional logical volumes inside the volume group already created, though it may require making /'s logical volume smaller to create space. In general, using logical volumes is preferable to using partitions because they can be more easily adjusted later.
  • If creating a custom layout, create the partitions mentioned in the previous paragraph (which the installer will require anyway), as well as separate ones described in the following sections.
If a system has already been installed, and the default partitioning scheme was used, it is possible but nontrivial to modify it to create separate logical volumes for the directories listed above. The Logical Volume Manager (LVM) makes this possible. See the LVM HOWTO at http://tldp.org/HOWTO/LVM-HOWTO/ for more detailed information on LVM.

Rule   Ensure /tmp Located On Separate Partition   [ref]

The /tmp directory is a world-writable directory used for temporary file storage. Ensure it has its own partition or logical volume at installation time, or migrate it using LVM.
Rationale:
The /tmp partition is used as temporary storage by many programs. Placing /tmp in its own partition enables the setting of more restrictive mount options, which can help protect programs which use it.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_partition_for_tmp
Identifiers and References

Identifiers:  CCE-80851-9

References:  BP28(R12), 12, 15, 8, APO13.01, DSS05.02, CCI-000366, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.13.1.1, A.13.2.1, A.14.1.3, CM-6(a), SC-5(2), PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-08-010543, 1.1.2.1, SV-230295r627750_rule


Complexity:low
Disruption:high
Reboot:false
Strategy:enable

part /tmp


[[customizations.filesystem]]
mountpoint = "/tmp"
size = 1073741824
Group   GNOME Desktop Environment   Group contains 2 groups and 5 rules
[ref]   GNOME is a graphical desktop environment bundled with many Linux distributions that allow users to easily interact with the operating system graphically rather than textually. The GNOME Graphical Display Manager (GDM) provides login, logout, and user switching contexts as well as display server management.

GNOME is developed by the GNOME Project and is considered the default Red Hat Graphical environment.

For more information on GNOME and the GNOME Project, see https://www.gnome.org.
Group   Configure GNOME Login Screen   Group contains 2 rules

Rule   Disable the GNOME3 Login User List   [ref]

In the default graphical environment, users logging directly into the system are greeted with a login screen that displays all known users. This functionality should be disabled by setting disable-user-list to true.

To disable, add or edit disable-user-list to /etc/dconf/db/gdm.d/00-security-settings. For example:
[org/gnome/login-screen]
disable-user-list=true
Once the setting has been added, add a lock to /etc/dconf/db/gdm.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/login-screen/disable-user-list
After the settings have been set, run dconf update.
Rationale:
Leaving the user list enabled is a security risk since it allows anyone with physical access to the system to quickly enumerate known user accounts without logging in.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_dconf_gnome_disable_user_list
Identifiers and References

Identifiers:  CCE-86195-5

References:  CM-6(a), AC-23, SRG-OS-000480-GPOS-00227, RHEL-08-020032, 1.8.3, SV-244536r743857_rule


# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/login-screen\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|gdm.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/gdm.d/00-security-settings"
DBDIR="/etc/dconf/db/gdm.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*disable-user-list\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)disable-user-list(\s*=)/#\1disable-user-list\2/g" "${SETTINGSFILES[@]}"
    fi
fi


[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/login-screen\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/login-screen]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "true")"
if grep -q "^\\s*disable-user-list\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*disable-user-list\\s*=\\s*.*/disable-user-list=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/login-screen\\]|a\\disable-user-list=${escaped_value}" "${DCONFFILE}"
fi

dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/login-screen/disable-user-list$" "/etc/dconf/db/" \
            | grep -v 'distro\|ibus\|gdm.d' | grep ":" | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/gdm.d/locks"

mkdir -p "${LOCKSFOLDER}"

# Comment out the configurations in databases different from the target one
if [[ ! -z "${LOCKFILES}" ]]
then
    sed -i -E "s|^/org/gnome/login-screen/disable-user-list$|#&|" "${LOCKFILES[@]}"
fi

if ! grep -qr "^/org/gnome/login-screen/disable-user-list$" /etc/dconf/db/gdm.d/
then
    echo "/org/gnome/login-screen/disable-user-list" >> "/etc/dconf/db/gdm.d/locks/00-security-settings-lock"
fi

dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-86195-5
  - DISA-STIG-RHEL-08-020032
  - NIST-800-53-AC-23
  - NIST-800-53-CM-6(a)
  - dconf_gnome_disable_user_list
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Disable the GNOME3 Login User List
  ini_file:
    dest: /etc/dconf/db/gdm.d/00-security-settings
    section: org/gnome/login-screen
    option: disable-user-list
    value: 'true'
    no_extra_spaces: true
    create: true
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-86195-5
  - DISA-STIG-RHEL-08-020032
  - NIST-800-53-AC-23
  - NIST-800-53-CM-6(a)
  - dconf_gnome_disable_user_list
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Prevent user modification of GNOME3 disablement of Login User List
  lineinfile:
    path: /etc/dconf/db/gdm.d/locks/00-security-settings-lock
    regexp: ^/org/gnome/login-screen/disable-user-list$
    line: /org/gnome/login-screen/disable-user-list
    create: true
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-86195-5
  - DISA-STIG-RHEL-08-020032
  - NIST-800-53-AC-23
  - NIST-800-53-CM-6(a)
  - dconf_gnome_disable_user_list
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Dconf Update
  command: dconf update
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-86195-5
  - DISA-STIG-RHEL-08-020032
  - NIST-800-53-AC-23
  - NIST-800-53-CM-6(a)
  - dconf_gnome_disable_user_list
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

Rule   Disable XDMCP in GDM   [ref]

XDMCP is an unencrypted protocol, and therefore, presents a security risk, see e.g. XDMCP Gnome docs. To disable XDMCP support in Gnome, set Enable to false under the [xdmcp] configuration section in /etc/gdm/custom.conf. For example:
[xdmcp]
Enable=false
Rationale:
XDMCP provides unencrypted remote access through the Gnome Display Manager (GDM) which does not provide for the confidentiality and integrity of user passwords or the remote session. If a privileged user were to login using XDMCP, the privileged user password could be compromised due to typed XEvents and keystrokes will traversing over the network in clear text.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_gnome_gdm_disable_xdmcp
Identifiers and References

Identifiers:  CCE-86007-2

References:  1.8.4


# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm; then

# Try find '[xdmcp]' and 'Enable' in '/etc/gdm/custom.conf', if it exists, set
# to 'false', if it isn't here, add it, if '[xdmcp]' doesn't exist, add it there
if grep -qzosP '[[:space:]]*\[xdmcp]([^\n\[]*\n+)+?[[:space:]]*Enable' '/etc/gdm/custom.conf'; then
    
    sed -i "s/Enable[^(\n)]*/Enable=false/" '/etc/gdm/custom.conf'
elif grep -qs '[[:space:]]*\[xdmcp]' '/etc/gdm/custom.conf'; then
    sed -i "/[[:space:]]*\[xdmcp]/a Enable=false" '/etc/gdm/custom.conf'
else
    if test -d "/etc/gdm"; then
        printf '%s\n' '[xdmcp]' "Enable=false" >> '/etc/gdm/custom.conf'
    else
        echo "Config file directory '/etc/gdm' doesnt exist, not remediating, assuming non-applicability." >&2
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-86007-2
  - gnome_gdm_disable_xdmcp
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed
  - unknown_strategy

- name: Disable XDMCP in GDM
  ini_file:
    path: /etc/gdm/custom.conf
    section: xdmcp
    option: Enable
    value: 'false'
    create: true
    mode: 420
  when: '"gdm" in ansible_facts.packages'
  tags:
  - CCE-86007-2
  - gnome_gdm_disable_xdmcp
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed
  - unknown_strategy
Group   GNOME Media Settings   Group contains 2 rules
[ref]   GNOME media settings that apply to the graphical interface.

Rule   Disable GNOME3 Automounting   [ref]

The system's default desktop environment, GNOME3, will mount devices and removable media (such as DVDs, CDs and USB flash drives) whenever they are inserted into the system. To disable automount within GNOME3, add or set automount to false in /etc/dconf/db/local.d/00-security-settings. For example:
[org/gnome/desktop/media-handling]
automount=false
Once the settings have been added, add a lock to /etc/dconf/db/local.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/desktop/media-handling/automount
After the settings have been set, run dconf update.
Rationale:
Disabling automatic mounting in GNOME3 can prevent the introduction of malware via removable media. It will, however, also prevent desktop users from legitimate use of removable media.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_dconf_gnome_disable_automount
Identifiers and References

Identifiers:  CCE-89904-7

References:  12, 16, APO13.01, DSS01.04, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS06.03, 3.1.7, CCI-000366, CCI-000778, CCI-001958, 4.3.3.2.2, 4.3.3.5.2, 4.3.3.6.6, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.13, SR 1.2, SR 1.4, SR 1.5, SR 1.9, SR 2.1, SR 2.6, A.11.2.6, A.13.1.1, A.13.2.1, A.6.2.1, A.6.2.2, A.7.1.1, A.9.2.1, CM-7(a), CM-7(b), CM-6(a), PR.AC-3, PR.AC-6, SRG-OS-000114-GPOS-00059, SRG-OS-000378-GPOS-00163, SRG-OS-000480-GPOS-00227, 1.8.5


# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/desktop/media-handling\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|local.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/local.d/00-security-settings"
DBDIR="/etc/dconf/db/local.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*automount\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)automount(\s*=)/#\1automount\2/g" "${SETTINGSFILES[@]}"
    fi
fi


[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/desktop/media-handling\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/desktop/media-handling]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "false")"
if grep -q "^\\s*automount\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*automount\\s*=\\s*.*/automount=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/desktop/media-handling\\]|a\\automount=${escaped_value}" "${DCONFFILE}"
fi

dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/desktop/media-handling/automount$" "/etc/dconf/db/" \
            | grep -v 'distro\|ibus\|local.d' | grep ":" | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/local.d/locks"

mkdir -p "${LOCKSFOLDER}"

# Comment out the configurations in databases different from the target one
if [[ ! -z "${LOCKFILES}" ]]
then
    sed -i -E "s|^/org/gnome/desktop/media-handling/automount$|#&|" "${LOCKFILES[@]}"
fi

if ! grep -qr "^/org/gnome/desktop/media-handling/automount$" /etc/dconf/db/local.d/
then
    echo "/org/gnome/desktop/media-handling/automount" >> "/etc/dconf/db/local.d/locks/00-security-settings-lock"
fi

dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-89904-7
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - dconf_gnome_disable_automount
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Disable GNOME3 Automounting - automount
  ini_file:
    dest: /etc/dconf/db/local.d/00-security-settings
    section: org/gnome/desktop/media-handling
    option: automount
    value: 'false'
    create: true
    no_extra_spaces: true
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-89904-7
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - dconf_gnome_disable_automount
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Prevent user modification of GNOME3 Automounting - automount
  lineinfile:
    path: /etc/dconf/db/local.d/locks/00-security-settings-lock
    regexp: ^/org/gnome/desktop/media-handling/automount$
    line: /org/gnome/desktop/media-handling/automount
    create: true
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-89904-7
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - dconf_gnome_disable_automount
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Dconf Update
  command: dconf update
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-89904-7
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - dconf_gnome_disable_automount
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

Rule   Disable GNOME3 Automount Opening   [ref]

The system's default desktop environment, GNOME3, will mount devices and removable media (such as DVDs, CDs and USB flash drives) whenever they are inserted into the system. To disable automount-open within GNOME3, add or set automount-open to false in /etc/dconf/db/local.d/00-security-settings. For example:
[org/gnome/desktop/media-handling]
automount-open=false
Once the settings have been added, add a lock to /etc/dconf/db/local.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/desktop/media-handling/automount-open
After the settings have been set, run dconf update.
Rationale:
Automatically mounting file systems permits easy introduction of unknown devices, thereby facilitating malicious activity. Disabling automatic mounting in GNOME3 can prevent the introduction of malware via removable media. It will, however, also prevent desktop users from legitimate use of removable media.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_dconf_gnome_disable_automount_open
Identifiers and References

Identifiers:  CCE-83693-2

References:  12, 16, APO13.01, DSS01.04, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS06.03, 3.1.7, CCI-000366, CCI-000778, CCI-001958, 4.3.3.2.2, 4.3.3.5.2, 4.3.3.6.6, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.13, SR 1.2, SR 1.4, SR 1.5, SR 1.9, SR 2.1, SR 2.6, A.11.2.6, A.13.1.1, A.13.2.1, A.6.2.1, A.6.2.2, A.7.1.1, A.9.2.1, CM-7(a), CM-7(b), CM-6(a), PR.AC-3, PR.AC-6, SRG-OS-000114-GPOS-00059, SRG-OS-000378-GPOS-00163, SRG-OS-000480-GPOS-00227, 1.8.5


# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/desktop/media-handling\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|local.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/local.d/00-security-settings"
DBDIR="/etc/dconf/db/local.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*automount-open\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)automount-open(\s*=)/#\1automount-open\2/g" "${SETTINGSFILES[@]}"
    fi
fi


[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/desktop/media-handling\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/desktop/media-handling]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "false")"
if grep -q "^\\s*automount-open\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*automount-open\\s*=\\s*.*/automount-open=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/desktop/media-handling\\]|a\\automount-open=${escaped_value}" "${DCONFFILE}"
fi

dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/desktop/media-handling/automount-open$" "/etc/dconf/db/" \
            | grep -v 'distro\|ibus\|local.d' | grep ":" | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/local.d/locks"

mkdir -p "${LOCKSFOLDER}"

# Comment out the configurations in databases different from the target one
if [[ ! -z "${LOCKFILES}" ]]
then
    sed -i -E "s|^/org/gnome/desktop/media-handling/automount-open$|#&|" "${LOCKFILES[@]}"
fi

if ! grep -qr "^/org/gnome/desktop/media-handling/automount-open$" /etc/dconf/db/local.d/
then
    echo "/org/gnome/desktop/media-handling/automount-open" >> "/etc/dconf/db/local.d/locks/00-security-settings-lock"
fi

dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83693-2
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - dconf_gnome_disable_automount_open
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Disable GNOME3 Automounting - automount-open
  ini_file:
    dest: /etc/dconf/db/local.d/00-security-settings
    section: org/gnome/desktop/media-handling
    option: automount-open
    value: 'false'
    create: true
    no_extra_spaces: true
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83693-2
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - dconf_gnome_disable_automount_open
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Prevent user modification of GNOME3 Automounting - automount-open
  lineinfile:
    path: /etc/dconf/db/local.d/locks/00-security-settings-lock
    regexp: ^/org/gnome/desktop/media-handling/automount-open$
    line: /org/gnome/desktop/media-handling/automount-open
    create: true
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83693-2
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - dconf_gnome_disable_automount_open
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Dconf Update
  command: dconf update
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83693-2
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - dconf_gnome_disable_automount_open
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

Rule   Make sure that the dconf databases are up-to-date with regards to respective keyfiles   [ref]

By default, DConf uses a binary database as a data backend. The system-level database is compiled from keyfiles in the /etc/dconf/db/ directory by the
dconf update
command. More specifically, content present in the following directories:
/etc/dconf/db/gdm.d
/etc/dconf/db/local.d
Rationale:
Unlike text-based keyfiles, the binary database is impossible to check by OVAL. Therefore, in order to evaluate dconf configuration, both have to be true at the same time - configuration files have to be compliant, and the database needs to be more recent than those keyfiles, which gives confidence that it reflects them.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_dconf_db_up_to_date
Identifiers and References

Identifiers:  CCE-81003-6

References:  164.308(a)(1)(ii)(B), 164.308(a)(5)(ii)(A), Req-6.2, 6.3.3, SRG-OS-000480-GPOS-00227, 1.8.2


# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-81003-6
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - dconf_db_up_to_date
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed
  - unknown_strategy

- name: Run dconf update
  ansible.builtin.command:
    cmd: dconf update
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-81003-6
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - dconf_db_up_to_date
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed
  - unknown_strategy
Group   Sudo   Group contains 4 rules
[ref]   Sudo, which stands for "su 'do'", provides the ability to delegate authority to certain users, groups of users, or system administrators. When configured for system users and/or groups, Sudo can allow a user or group to execute privileged commands that normally only root is allowed to execute.

For more information on Sudo and addition Sudo configuration options, see https://www.sudo.ws.

Rule   Install sudo Package   [ref]

The sudo package can be installed with the following command:
$ sudo yum install sudo
Rationale:
sudo is a program designed to allow a system administrator to give limited root privileges to users and log root activity. The basic philosophy is to give as few privileges as possible but still allow system users to get their work done.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_sudo_installed
Identifiers and References

Identifiers:  CCE-82214-8

References:  BP28(R19), 1382, 1384, 1386, CM-6(a), FMT_MOF_EXT.1, 10.2.1.5, SRG-OS-000324-GPOS-00125, 5.3.1


Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include install_sudo

class install_sudo {
  package { 'sudo':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Reboot:false
Strategy:enable

package --add=sudo


[[packages]]
name = "sudo"
version = "*"

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "sudo" ; then
    yum install -y "sudo"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Ensure sudo is installed
  package:
    name: sudo
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-82214-8
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-10.2.1.5
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_sudo_installed

Rule   Ensure Only Users Logged In To Real tty Can Execute Sudo - sudo use_pty   [ref]

The sudo use_pty tag, when specified, will only execute sudo commands from users logged in to a real tty. This should be enabled by making sure that the use_pty tag exists in /etc/sudoers configuration file or any sudo configuration snippets in /etc/sudoers.d/.
Rationale:
Requiring that sudo commands be run in a pseudo-terminal can prevent an attacker from retaining access to the user's terminal after the main program has finished executing.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sudo_add_use_pty
Identifiers and References

Identifiers:  CCE-83798-9

References:  BP28(R58), Req-10.2.5, 10.2.1.5, 5.3.2


Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q sudo; then

if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults[\s]*\buse_pty\b.*$' /etc/sudoers; then
        # sudoers file doesn't define Option use_pty
        echo "Defaults use_pty" >> /etc/sudoers
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83798-9
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_add_use_pty

- name: Ensure use_pty is enabled in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    regexp: ^[\s]*Defaults.*\buse_pty\b.*$
    line: Defaults use_pty
    validate: /usr/sbin/visudo -cf %s
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-83798-9
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_add_use_pty

Rule   Ensure Sudo Logfile Exists - sudo logfile   [ref]

A custom log sudo file can be configured with the 'logfile' tag. This rule configures a sudo custom logfile at the default location suggested by CIS, which uses /var/log/sudo.log.
Rationale:
A sudo log file simplifies auditing of sudo commands.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_sudo_custom_logfile
Identifiers and References

Identifiers:  CCE-83601-5

References:  Req-10.2.5, 10.2.1.5, 5.3.3


Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q sudo; then

var_sudo_logfile='/var/log/sudo.log'


if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults[\s]*\blogfile=("(?:\\"|\\\\|[^"\\\n])*"\B|[^"](?:(?:\\,|\\"|\\ |\\\\|[^", \\\n])*)\b)\b.*$' /etc/sudoers; then
        # sudoers file doesn't define Option logfile
        echo "Defaults logfile=${var_sudo_logfile}" >> /etc/sudoers
    else
        # sudoers file defines Option logfile, remediate if appropriate value is not set
        if ! grep -P "^[\s]*Defaults.*\blogfile=${var_sudo_logfile}\b.*$" /etc/sudoers; then
            
            escaped_variable=${var_sudo_logfile//$'/'/$'\/'}
            sed -Ei "s/(^[\s]*Defaults.*\blogfile=)[-]?.+(\b.*$)/\1$escaped_variable\2/" /etc/sudoers
        fi
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83601-5
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_custom_logfile
- name: XCCDF Value var_sudo_logfile # promote to variable
  set_fact:
    var_sudo_logfile: !!str /var/log/sudo.log
  tags:
    - always

- name: Ensure logfile is enabled with the appropriate value in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    regexp: ^[\s]*Defaults\s(.*)\blogfile=[-]?.+\b(.*)$
    line: Defaults \1logfile={{ var_sudo_logfile }}\2
    validate: /usr/sbin/visudo -cf %s
    backrefs: true
  register: edit_sudoers_logfile_option
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-83601-5
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_custom_logfile

- name: Enable logfile option with appropriate value in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    line: Defaults logfile={{ var_sudo_logfile }}
    validate: /usr/sbin/visudo -cf %s
  when:
  - '"sudo" in ansible_facts.packages'
  - edit_sudoers_logfile_option is defined and not edit_sudoers_logfile_option.changed
  tags:
  - CCE-83601-5
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_custom_logfile

Rule   Require Re-Authentication When Using the sudo Command   [ref]

The sudo timestamp_timeout tag sets the amount of time sudo password prompt waits. The default timestamp_timeout value is 5 minutes. The timestamp_timeout should be configured by making sure that the timestamp_timeout tag exists in /etc/sudoers configuration file or any sudo configuration snippets in /etc/sudoers.d/. If the value is set to an integer less than 0, the user's time stamp will not expire and the user will not have to re-authenticate for privileged actions until the user's session is terminated.
Rationale:
Without re-authentication, users may access resources or perform tasks for which they do not have authorization.

When operating systems provide the capability to escalate a functional capability, it is critical that the user re-authenticate.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sudo_require_reauthentication
Identifiers and References

Identifiers:  CCE-87838-9

References:  CCI-002038, IA-11, SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157, SRG-OS-000373-GPOS-00158, RHEL-08-010384, 5.3.5, 5.3.6, SV-237643r861088_rule


Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q sudo; then

var_sudo_timestamp_timeout='5'


if grep -Px '^[\s]*Defaults.*timestamp_timeout[\s]*=.*' /etc/sudoers.d/*; then
    find /etc/sudoers.d/ -type f -exec sed -Ei "/^[[:blank:]]*Defaults.*timestamp_timeout[[:blank:]]*=.*/d" {} \;
fi

if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults.*timestamp_timeout[\s]*=[\s]*[-]?\w+.*$' /etc/sudoers; then
        # sudoers file doesn't define Option timestamp_timeout
        echo "Defaults timestamp_timeout=${var_sudo_timestamp_timeout}" >> /etc/sudoers
    else
        # sudoers file defines Option timestamp_timeout, remediate if appropriate value is not set
        if ! grep -P "^[\s]*Defaults.*timestamp_timeout[\s]*=[\s]*${var_sudo_timestamp_timeout}.*$" /etc/sudoers; then
            
            sed -Ei "s/(^[[:blank:]]*Defaults.*timestamp_timeout[[:blank:]]*=)[[:blank:]]*[-]?\w+(.*$)/\1${var_sudo_timestamp_timeout}\2/" /etc/sudoers
        fi
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-87838-9
  - DISA-STIG-RHEL-08-010384
  - NIST-800-53-IA-11
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_require_reauthentication
- name: XCCDF Value var_sudo_timestamp_timeout # promote to variable
  set_fact:
    var_sudo_timestamp_timeout: !!str 5
  tags:
    - always

- name: Find out if /etc/sudoers.d/* files contain 'Defaults timestamp_timeout' to
    be deduplicated
  find:
    path: /etc/sudoers.d
    patterns: '*'
    contains: ^[\s]*Defaults\s.*\btimestamp_timeout[\s]*=.*
  register: sudoers_d_defaults_timestamp_timeout
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-87838-9
  - DISA-STIG-RHEL-08-010384
  - NIST-800-53-IA-11
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_require_reauthentication

- name: Remove found occurrences of 'Defaults timestamp_timeout' from /etc/sudoers.d/*
    files
  lineinfile:
    path: '{{ item.path }}'
    regexp: ^[\s]*Defaults\s.*\btimestamp_timeout[\s]*=.*
    state: absent
  with_items: '{{ sudoers_d_defaults_timestamp_timeout.files }}'
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-87838-9
  - DISA-STIG-RHEL-08-010384
  - NIST-800-53-IA-11
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_require_reauthentication

- name: Ensure timestamp_timeout is enabled with the appropriate value in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    regexp: ^[\s]*Defaults\s(.*)\btimestamp_timeout[\s]*=[\s]*[-]?\w+\b(.*)$
    line: Defaults \1timestamp_timeout={{ var_sudo_timestamp_timeout }}\2
    validate: /usr/sbin/visudo -cf %s
    backrefs: true
  register: edit_sudoers_timestamp_timeout_option
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-87838-9
  - DISA-STIG-RHEL-08-010384
  - NIST-800-53-IA-11
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_require_reauthentication

- name: Enable timestamp_timeout option with appropriate value in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    line: Defaults timestamp_timeout={{ var_sudo_timestamp_timeout }}
    validate: /usr/sbin/visudo -cf %s
  when:
  - '"sudo" in ansible_facts.packages'
  - edit_sudoers_timestamp_timeout_option is defined and not edit_sudoers_timestamp_timeout_option.changed
  tags:
  - CCE-87838-9
  - DISA-STIG-RHEL-08-010384
  - NIST-800-53-IA-11
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_require_reauthentication
Group   Updating Software   Group contains 1 rule
[ref]   The yum command line tool is used to install and update software packages. The system also provides a graphical software update tool in the System menu, in the Administration submenu, called Software Update.

Red Hat Enterprise Linux 8 systems contain an installed software catalog called the RPM database, which records metadata of installed packages. Consistently using yum or the graphical Software Update for all software installation allows for insight into the current inventory of installed software on the system.

Rule   Ensure gpgcheck Enabled In Main yum Configuration   [ref]

The gpgcheck option controls whether RPM packages' signatures are always checked prior to installation. To configure yum to check package signatures before installing them, ensure the following line appears in /etc/yum.conf in the [main] section:
gpgcheck=1
Rationale:
Changes to any software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor.
Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA).
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_gpgcheck_globally_activated
Identifiers and References

Identifiers:  CCE-80790-9

References:  BP28(R15), 11, 2, 3, 9, 5.10.4.1, APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02, 3.4.8, CCI-001749, 164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i), 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, CM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), SA-12, SA-12(10), CM-11(a), CM-11(b), PR.DS-6, PR.DS-8, PR.IP-1, FPT_TUD_EXT.1, FPT_TUD_EXT.2, Req-6.2, 6.3.3, SRG-OS-000366-GPOS-00153, RHEL-08-010370, 1.2.3, SV-230264r880711_rule


# Remediation is applicable only in certain platforms
if rpm --quiet -q yum; then

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^gpgcheck")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^gpgcheck\\>" "/etc/yum.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^gpgcheck\\>.*/$escaped_formatted_output/gi" "/etc/yum.conf"
else
    if [[ -s "/etc/yum.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/yum.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/yum.conf"
    fi
    cce="CCE-80790-9"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/yum.conf" >> "/etc/yum.conf"
    printf '%s\n' "$formatted_output" >> "/etc/yum.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-80790-9
  - CJIS-5.10.4.1
  - DISA-STIG-RHEL-08-010370
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - configure_strategy
  - ensure_gpgcheck_globally_activated
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed

- name: Ensure GPG check is globally activated
  ini_file:
    dest: /etc/yum.conf
    section: main
    option: gpgcheck
    value: 1
    no_extra_spaces: true
    create: false
  when: '"yum" in ansible_facts.packages'
  tags:
  - CCE-80790-9
  - CJIS-5.10.4.1
  - DISA-STIG-RHEL-08-010370
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - configure_strategy
  - ensure_gpgcheck_globally_activated
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed
Group   Account and Access Control   Group contains 16 groups and 63 rules
[ref]   In traditional Unix security, if an attacker gains shell access to a certain login account, they can perform any action or access any file to which that account has access. Therefore, making it more difficult for unauthorized people to gain shell access to accounts, particularly to privileged accounts, is a necessary part of securing a system. This section introduces mechanisms for restricting access to accounts under Red Hat Enterprise Linux 8.
Group   Warning Banners for System Accesses   Group contains 1 group and 14 rules
[ref]   Each system should expose as little information about itself as possible.

System banners, which are typically displayed just before a login prompt, give out information about the service or the host's operating system. This might include the distribution name and the system kernel version, and the particular version of a network service. This information can assist intruders in gaining access to the system as it can reveal whether the system is running vulnerable software. Most network services can be configured to limit what information is displayed.

Many organizations implement security policies that require a system banner provide notice of the system's ownership, provide warning to unauthorized users, and remind authorized users of their consent to monitoring.
Group   Implement a GUI Warning Banner   Group contains 2 rules

Rule   Enable GNOME3 Login Warning Banner   [ref]

In the default graphical environment, displaying a login warning banner in the GNOME Display Manager's login screen can be enabled on the login screen by setting banner-message-enable to true.

To enable, add or edit banner-message-enable to /etc/dconf/db/gdm.d/00-security-settings. For example:
[org/gnome/login-screen]
banner-message-enable=true
Once the setting has been added, add a lock to /etc/dconf/db/gdm.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/login-screen/banner-message-enable
After the settings have been set, run dconf update. The banner text must also be set.
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.

For U.S. Government systems, system use notifications are required only for access via login interfaces with human users and are not required when such human interfaces do not exist.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_dconf_gnome_banner_enabled
Identifiers and References

Identifiers:  CCE-80768-5

References:  1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, 3.1.9, CCI-000048, CCI-000050, CCI-001384, CCI-001385, CCI-001386, CCI-001387, CCI-001388, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, AC-8(a), AC-8(b), AC-8(c), PR.AC-7, FMT_MOF_EXT.1, SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088, RHEL-08-010049, 1.8.2, SV-244519r743806_rule


# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm; then

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/login-screen\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|gdm.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/gdm.d/00-security-settings"
DBDIR="/etc/dconf/db/gdm.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*banner-message-enable\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)banner-message-enable(\s*=)/#\1banner-message-enable\2/g" "${SETTINGSFILES[@]}"
    fi
fi


[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/login-screen\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/login-screen]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "true")"
if grep -q "^\\s*banner-message-enable\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*banner-message-enable\\s*=\\s*.*/banner-message-enable=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/login-screen\\]|a\\banner-message-enable=${escaped_value}" "${DCONFFILE}"
fi

dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/login-screen/banner-message-enable$" "/etc/dconf/db/" \
            | grep -v 'distro\|ibus\|gdm.d' | grep ":" | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/gdm.d/locks"

mkdir -p "${LOCKSFOLDER}"

# Comment out the configurations in databases different from the target one
if [[ ! -z "${LOCKFILES}" ]]
then
    sed -i -E "s|^/org/gnome/login-screen/banner-message-enable$|#&|" "${LOCKFILES[@]}"
fi

if ! grep -qr "^/org/gnome/login-screen/banner-message-enable$" /etc/dconf/db/gdm.d/
then
    echo "/org/gnome/login-screen/banner-message-enable" >> "/etc/dconf/db/gdm.d/locks/00-security-settings-lock"
fi

dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-80768-5
  - DISA-STIG-RHEL-08-010049
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(b)
  - NIST-800-53-AC-8(c)
  - dconf_gnome_banner_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Enable GNOME3 Login Warning Banner
  ini_file:
    dest: /etc/dconf/db/gdm.d/00-security-settings
    section: org/gnome/login-screen
    option: banner-message-enable
    value: 'true'
    create: true
    no_extra_spaces: true
  when: '"gdm" in ansible_facts.packages'
  tags:
  - CCE-80768-5
  - DISA-STIG-RHEL-08-010049
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(b)
  - NIST-800-53-AC-8(c)
  - dconf_gnome_banner_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Prevent user modification of GNOME banner-message-enabled
  lineinfile:
    path: /etc/dconf/db/gdm.d/locks/00-security-settings-lock
    regexp: ^/org/gnome/login-screen/banner-message-enable$
    line: /org/gnome/login-screen/banner-message-enable
    create: true
  when: '"gdm" in ansible_facts.packages'
  tags:
  - CCE-80768-5
  - DISA-STIG-RHEL-08-010049
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(b)
  - NIST-800-53-AC-8(c)
  - dconf_gnome_banner_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Dconf Update
  command: dconf update
  when: '"gdm" in ansible_facts.packages'
  tags:
  - CCE-80768-5
  - DISA-STIG-RHEL-08-010049
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(b)
  - NIST-800-53-AC-8(c)
  - dconf_gnome_banner_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

Rule   Modify the System Login Banner   [ref]

To configure the system login banner edit /etc/issue. Replace the default text with a message compliant with the local site policy or a legal disclaimer. The DoD required text is either:

You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests -- not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.


OR:

I've read & consent to terms in IS user agreem't.
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.

System use notifications are required only for access via login interfaces with human users and are not required when such human interfaces do not exist.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_banner_etc_issue
Identifiers and References

Identifiers:  CCE-80763-6

References:  1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, 3.1.9, CCI-000048, CCI-000050, CCI-001384, CCI-001385, CCI-001386, CCI-001387, CCI-001388, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, AC-8(a), AC-8(c), PR.AC-7, FMT_MOF_EXT.1, SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088, RHEL-08-010060, 1.7.2, SV-230227r627750_rule


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

login_banner_text='^(Authorized[\s\n]+uses[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.|^(?!.*(\\|fedora|rhel|sle|ubuntu)).*)$'


# Multiple regexes transform the banner regex into a usable banner
# 0 - Remove anchors around the banner text
login_banner_text=$(echo "$login_banner_text" | sed 's/^\^\(.*\)\$$/\1/g')
# 1 - Keep only the first banners if there are multiple
#    (dod_banners contains the long and short banner)
login_banner_text=$(echo "$login_banner_text" | sed 's/^(\(.*\.\)|.*)$/\1/g')
# 2 - Add spaces ' '. (Transforms regex for "space or newline" into a " ")
login_banner_text=$(echo "$login_banner_text" | sed 's/\[\\s\\n\]+/ /g')
# 3 - Adds newlines. (Transforms "(?:\[\\n\]+|(?:\\n)+)" into "\n")
login_banner_text=$(echo "$login_banner_text" | sed 's/(?:\[\\n\]+|(?:\\\\n)+)/\n/g')
# 4 - Remove any leftover backslash. (From any parethesis in the banner, for example).
login_banner_text=$(echo "$login_banner_text" | sed 's/\\//g')
formatted=$(echo "$login_banner_text" | fold -sw 80)
cat <<EOF >/etc/issue
$formatted
EOF

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: XCCDF Value login_banner_text # promote to variable
  set_fact:
    login_banner_text: !!str ^(Authorized[\s\n]+uses[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.|^(?!.*(\\|fedora|rhel|sle|ubuntu)).*)$
  tags:
    - always

- name: Modify the System Login Banner - Ensure Correct Banner
  copy:
    dest: /etc/issue
    content: '{{ login_banner_text | regex_replace("^\^(.*)\$$", "\1") | regex_replace("^\((.*\.)\|.*\)$",
      "\1") | regex_replace("\[\\s\\n\]\+"," ") | regex_replace("\(\?:\[\\n\]\+\|\(\?:\\\\n\)\+\)",
      "\n") | regex_replace("\\", "") | wordwrap() }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-80763-6
  - DISA-STIG-RHEL-08-010060
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(c)
  - banner_etc_issue
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

Rule   Modify the System Login Banner for Remote Connections   [ref]

To configure the system login banner edit /etc/issue.net. Replace the default text with a message compliant with the local site policy or a legal disclaimer. The DoD required text is either:

You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests -- not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.


OR:

I've read & consent to terms in IS user agreem't.
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.

System use notifications are required only for access via login interfaces with human users and are not required when such human interfaces do not exist.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_banner_etc_issue_net
Identifiers and References

Identifiers:  CCE-86147-6

References:  CCI-000048, CCI-001384, CCI-001385, CCI-001386, CCI-001387, CCI-001388, SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088, 1.7.3


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

remote_login_banner_text='^(Authorized[\s\n]+uses[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.|^(?!.*(\\|fedora|rhel|sle|ubuntu)).*)$'


# Multiple regexes transform the banner regex into a usable banner
# 0 - Remove anchors around the banner text
remote_login_banner_text=$(echo "$remote_login_banner_text" | sed 's/^\^\(.*\)\$$/\1/g')
# 1 - Keep only the first banners if there are multiple
#    (dod_banners contains the long and short banner)
remote_login_banner_text=$(echo "$remote_login_banner_text" | sed 's/^(\(.*\.\)|.*)$/\1/g')
# 2 - Add spaces ' '. (Transforms regex for "space or newline" into a " ")
remote_login_banner_text=$(echo "$remote_login_banner_text" | sed 's/\[\\s\\n\]+/ /g')
# 3 - Adds newlines. (Transforms "(?:\[\\n\]+|(?:\\n)+)" into "\n")
remote_login_banner_text=$(echo "$remote_login_banner_text" | sed 's/(?:\[\\n\]+|(?:\\\\n)+)/\n/g')
# 4 - Remove any leftover backslash. (From any parethesis in the banner, for example).
remote_login_banner_text=$(echo "$remote_login_banner_text" | sed 's/\\//g')
formatted=$(echo "$remote_login_banner_text" | fold -sw 80)

cat <<EOF >/etc/issue.net
$formatted
EOF

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: XCCDF Value remote_login_banner_text # promote to variable
  set_fact:
    remote_login_banner_text: !!str ^(Authorized[\s\n]+uses[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.|^(?!.*(\\|fedora|rhel|sle|ubuntu)).*)$
  tags:
    - always

- name: Modify the System Login Banner for Remote Connections - ensure correct banner
  copy:
    dest: /etc/issue.net
    content: '{{ remote_login_banner_text | regex_replace("^\^(.*)\$$", "\1") | regex_replace("^\((.*\.)\|.*\)$",
      "\1") | regex_replace("\[\\s\\n\]\+"," ") | regex_replace("\(\?:\[\\n\]\+\|\(\?:\\\\n\)\+\)",
      "\n") | regex_replace("\\", "") | wordwrap() }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-86147-6
  - banner_etc_issue_net
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

Rule   Modify the System Message of the Day Banner   [ref]

To configure the system message banner edit /etc/motd. Replace the default text with a message compliant with the local site policy or a legal disclaimer. The DoD required text is either:

You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests -- not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.


OR:

I've read & consent to terms in IS user agreem't.
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.

System use notifications are required only for access via login interfaces with human users and are not required when such human interfaces do not exist.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_banner_etc_motd
Identifiers and References

Identifiers:  CCE-83496-0

References:  1.7.1


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

motd_banner_text='^(Authorized[\s\n]+uses[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.|^(?!.*(\\|fedora|rhel|sle|ubuntu)).*)$'


# Multiple regexes transform the banner regex into a usable banner
# 0 - Remove anchors around the banner text
motd_banner_text=$(echo "$motd_banner_text" | sed 's/^\^\(.*\)\$$/\1/g')
# 1 - Keep only the first banners if there are multiple
#    (dod_banners contains the long and short banner)
motd_banner_text=$(echo "$motd_banner_text" | sed 's/^(\(.*\.\)|.*)$/\1/g')
# 2 - Add spaces ' '. (Transforms regex for "space or newline" into a " ")
motd_banner_text=$(echo "$motd_banner_text" | sed 's/\[\\s\\n\]+/ /g')
# 3 - Adds newlines. (Transforms "(?:\[\\n\]+|(?:\\n)+)" into "\n")
motd_banner_text=$(echo "$motd_banner_text" | sed 's/(?:\[\\n\]+|(?:\\\\n)+)/\n/g')
# 4 - Remove any leftover backslash. (From any parethesis in the banner, for example).
motd_banner_text=$(echo "$motd_banner_text" | sed 's/\\//g')
formatted=$(echo "$motd_banner_text" | fold -sw 80)

cat <<EOF >/etc/motd
$formatted
EOF

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: XCCDF Value motd_banner_text # promote to variable
  set_fact:
    motd_banner_text: !!str ^(Authorized[\s\n]+uses[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.|^(?!.*(\\|fedora|rhel|sle|ubuntu)).*)$
  tags:
    - always

- name: Modify the System Message of the Day Banner - ensure correct banner
  copy:
    dest: /etc/motd
    content: '{{ motd_banner_text | regex_replace("^\^(.*)\$$", "\1") | regex_replace("^\((.*\.)\|.*\)$",
      "\1") | regex_replace("\[\\s\\n\]\+"," ") | regex_replace("\(\?:\[\\n\]\+\|\(\?:\\\\n\)\+\)",
      "\n") | regex_replace("\\", "") | wordwrap() }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83496-0
  - banner_etc_motd
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

Rule   Verify Group Ownership of System Login Banner   [ref]

To properly set the group owner of /etc/issue, run the command:
$ sudo chgrp root /etc/issue
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper group ownership will ensure that only root user can modify the banner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_etc_issue
Identifiers and References

Identifiers:  CCE-83708-8

References:  1.7.5


Complexity:low
Disruption:low
Reboot:false
Strategy:configure
chgrp 0 /etc/issue

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Test for existence /etc/issue
  stat:
    path: /etc/issue
  register: file_exists
  tags:
  - CCE-83708-8
  - configure_strategy
  - file_groupowner_etc_issue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/issue
  file:
    path: /etc/issue
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-83708-8
  - configure_strategy
  - file_groupowner_etc_issue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Rule   Verify Group Ownership of System Login Banner for Remote Connections   [ref]

To properly set the group owner of /etc/issue.net, run the command:
$ sudo chgrp root /etc/issue.net
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper group ownership will ensure that only root user can modify the banner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_etc_issue_net
Identifiers and References

Identifiers:  CCE-86051-0

References:  1.7.6


Complexity:low
Disruption:low
Reboot:false
Strategy:configure
chgrp 0 /etc/issue.net

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Test for existence /etc/issue.net
  stat:
    path: /etc/issue.net
  register: file_exists
  tags:
  - CCE-86051-0
  - configure_strategy
  - file_groupowner_etc_issue_net
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/issue.net
  file:
    path: /etc/issue.net
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-86051-0
  - configure_strategy
  - file_groupowner_etc_issue_net
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Rule   Verify Group Ownership of Message of the Day Banner   [ref]

To properly set the group owner of /etc/motd, run the command:
$ sudo chgrp root /etc/motd
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper group ownership will ensure that only root user can modify the banner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_etc_motd
Identifiers and References

Identifiers:  CCE-83728-6

References:  1.7.4


Complexity:low
Disruption:low
Reboot:false
Strategy:configure
chgrp 0 /etc/motd

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Test for existence /etc/motd
  stat:
    path: /etc/motd
  register: file_exists
  tags:
  - CCE-83728-6
  - configure_strategy
  - file_groupowner_etc_motd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/motd
  file:
    path: /etc/motd
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-83728-6
  - configure_strategy
  - file_groupowner_etc_motd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Rule   Verify ownership of System Login Banner   [ref]

To properly set the owner of /etc/issue, run the command:
$ sudo chown root /etc/issue 
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper ownership will ensure that only root user can modify the banner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_etc_issue
Identifiers and References

Identifiers:  CCE-83718-7

References:  1.7.5


Complexity:low
Disruption:low
Reboot:false
Strategy:configure
chown 0 /etc/issue

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Test for existence /etc/issue
  stat:
    path: /etc/issue
  register: file_exists
  tags:
  - CCE-83718-7
  - configure_strategy
  - file_owner_etc_issue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/issue
  file:
    path: /etc/issue
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-83718-7
  - configure_strategy
  - file_owner_etc_issue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Rule   Verify ownership of System Login Banner for Remote Connections   [ref]

To properly set the owner of /etc/issue.net, run the command:
$ sudo chown root /etc/issue.net 
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper ownership will ensure that only root user can modify the banner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_etc_issue_net
Identifiers and References

Identifiers:  CCE-86054-4

References:  1.7.6


Complexity:low
Disruption:low
Reboot:false
Strategy:configure
chown 0 /etc/issue.net

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Test for existence /etc/issue.net
  stat:
    path: /etc/issue.net
  register: file_exists
  tags:
  - CCE-86054-4
  - configure_strategy
  - file_owner_etc_issue_net
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/issue.net
  file:
    path: /etc/issue.net
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-86054-4
  - configure_strategy
  - file_owner_etc_issue_net
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Rule   Verify ownership of Message of the Day Banner   [ref]

To properly set the owner of /etc/motd, run the command:
$ sudo chown root /etc/motd 
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper ownership will ensure that only root user can modify the banner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_etc_motd
Identifiers and References

Identifiers:  CCE-83738-5

References:  1.7.4


Complexity:low
Disruption:low
Reboot:false
Strategy:configure
chown 0 /etc/motd

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Test for existence /etc/motd
  stat:
    path: /etc/motd
  register: file_exists
  tags:
  - CCE-83738-5
  - configure_strategy
  - file_owner_etc_motd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/motd
  file:
    path: /etc/motd
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-83738-5
  - configure_strategy
  - file_owner_etc_motd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Rule   Verify permissions on System Login Banner   [ref]

To properly set the permissions of /etc/issue, run the command:
$ sudo chmod 0644 /etc/issue
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper permissions will ensure that only root user can modify the banner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_etc_issue
Identifiers and References

Identifiers:  CCE-83348-3

References:  1.7.5


Complexity:low
Disruption:low
Reboot:false
Strategy:configure





chmod u-xs,g-xws,o-xwt /etc/issue

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Test for existence /etc/issue
  stat:
    path: /etc/issue
  register: file_exists
  tags:
  - CCE-83348-3
  - configure_strategy
  - file_permissions_etc_issue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwt on /etc/issue
  file:
    path: /etc/issue
    mode: u-xs,g-xws,o-xwt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-83348-3
  - configure_strategy
  - file_permissions_etc_issue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Rule   Verify permissions on System Login Banner for Remote Connections   [ref]

To properly set the permissions of /etc/issue.net, run the command:
$ sudo chmod 0644 /etc/issue.net
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper permissions will ensure that only root user can modify the banner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_etc_issue_net
Identifiers and References

Identifiers:  CCE-86047-8

References:  1.7.6


Complexity:low
Disruption:low
Reboot:false
Strategy:configure





chmod u-xs,g-xws,o-xwt /etc/issue.net

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Test for existence /etc/issue.net
  stat:
    path: /etc/issue.net
  register: file_exists
  tags:
  - CCE-86047-8
  - configure_strategy
  - file_permissions_etc_issue_net
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwt on /etc/issue.net
  file:
    path: /etc/issue.net
    mode: u-xs,g-xws,o-xwt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-86047-8
  - configure_strategy
  - file_permissions_etc_issue_net
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Rule   Verify permissions on Message of the Day Banner   [ref]

To properly set the permissions of /etc/motd, run the command:
$ sudo chmod 0644 /etc/motd
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper permissions will ensure that only root user can modify the banner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_etc_motd
Identifiers and References

Identifiers:  CCE-83338-4

References:  1.7.4


Complexity:low
Disruption:low
Reboot:false
Strategy:configure





chmod u-xs,g-xws,o-xwt /etc/motd

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Test for existence /etc/motd
  stat:
    path: /etc/motd
  register: file_exists
  tags:
  - CCE-83338-4
  - configure_strategy
  - file_permissions_etc_motd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwt on /etc/motd
  file:
    path: /etc/motd
    mode: u-xs,g-xws,o-xwt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-83338-4
  - configure_strategy
  - file_permissions_etc_motd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
Group   Protect Accounts by Configuring PAM   Group contains 4 groups and 10 rules
[ref]   PAM, or Pluggable Authentication Modules, is a system which implements modular authentication for Linux programs. PAM provides a flexible and configurable architecture for authentication, and it should be configured to minimize exposure to unnecessary risk. This section contains guidance on how to accomplish that.

PAM is implemented as a set of shared objects which are loaded and invoked whenever an application wishes to authenticate a user. Typically, the application must be running as root in order to take advantage of PAM, because PAM's modules often need to be able to access sensitive stores of account information, such as /etc/shadow. Traditional privileged network listeners (e.g. sshd) or SUID programs (e.g. sudo) already meet this requirement. An SUID root application, userhelper, is provided so that programs which are not SUID or privileged themselves can still take advantage of PAM.

PAM looks in the directory /etc/pam.d for application-specific configuration information. For instance, if the program login attempts to authenticate a user, then PAM's libraries follow the instructions in the file /etc/pam.d/login to determine what actions should be taken.

One very important file in /etc/pam.d is /etc/pam.d/system-auth. This file, which is included by many other PAM configuration files, defines 'default' system authentication measures. Modifying this file is a good way to make far-reaching authentication changes, for instance when implementing a centralized authentication service.
Warning:  Be careful when making changes to PAM's configuration files. The syntax for these files is complex, and modifications can have unexpected consequences. The default configurations shipped with applications should be sufficient for most users.
Warning:  Running authconfig or system-config-authentication will re-write the PAM configuration files, destroying any manually made changes and replacing them with a series of system defaults. One reference to the configuration file syntax can be found at https://fossies.org/linux/Linux-PAM-docs/doc/sag/Linux-PAM_SAG.pdf.
Group   Set Lockouts for Failed Password Attempts   Group contains 4 rules
[ref]   The pam_faillock PAM module provides the capability to lock out user accounts after a number of failed login attempts. Its documentation is available in /usr/share/doc/pam-VERSION/txts/README.pam_faillock.

Warning:  Locking out user accounts presents the risk of a denial-of-service attack. The lockout policy must weigh whether the risk of such a denial-of-service attack outweighs the benefits of thwarting password guessing attacks.

Rule   Limit Password Reuse: password-auth   [ref]

Do not allow users to reuse recent passwords. This can be accomplished by using the remember option for the pam_pwhistory PAM module.

On systems with newer versions of authselect, the pam_pwhistory PAM module can be enabled via authselect feature:
authselect enable-feature with-pwhistory
Otherwise, it should be enabled using an authselect custom profile.

Newer systems also have the /etc/security/pwhistory.conf file for setting pam_pwhistory module options. This file should be used whenever available. Otherwise, the pam_pwhistory module options can be set in PAM files.

The value for remember option must be equal or greater than 5
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report.
Warning:  Newer versions of authselect contain an authselect feature to easily and properly enable pam_pwhistory.so module. If this feature is not yet available in your system, an authselect custom profile must be used to avoid integrity issues in PAM files. If a custom profile was created and used in the system before this authselect feature was available, the new feature can't be used with this custom profile and the remediation will fail. In this case, the custom profile should be recreated or manually updated.
Rationale:
Preventing re-use of previous passwords helps ensure that a compromised password is not re-used by a user.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_pwhistory_remember_password_auth
Identifiers and References

Identifiers:  CCE-83478-8

References:  1, 12, 15, 16, 5, 5.6.2.1.1, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.5.8, CCI-000200, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(f), IA-5(1)(e), PR.AC-1, PR.AC-6, PR.AC-7, Req-8.2.5, SRG-OS-000077-GPOS-00045, RHEL-08-020220, 5.5.3, SV-230368r902759_rule


# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_remember='5'
var_password_pam_remember_control_flag='requisite,required'


var_password_pam_remember_control_flag="$(echo $var_password_pam_remember_control_flag | cut -d \, -f 1)"

if [ -f /usr/bin/authselect ]; then
    if authselect list-features minimal | grep -q with-pwhistory; then
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi
        authselect enable-feature with-pwhistory

        authselect apply-changes -b
    else
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
        if ! grep -qP '^\s*password\s+'"$var_password_pam_remember_control_flag"'\s+pam_pwhistory.so\s*.*' "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"$var_password_pam_remember_control_flag"' \2/' "$PAM_FILE_PATH"
            else
                LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                if [ ! -z $LAST_MATCH_LINE ]; then
                    sed -i --follow-symlinks $LAST_MATCH_LINE' a password     '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' "$PAM_FILE_PATH"
                else
                    echo 'password    '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' >> "$PAM_FILE_PATH"
                fi
            fi
        fi
    fi
else
    if ! grep -qP '^\s*password\s+'"$var_password_pam_remember_control_flag"'\s+pam_pwhistory.so\s*.*' "/etc/pam.d/password-auth"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "/etc/pam.d/password-auth")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"$var_password_pam_remember_control_flag"' \2/' "/etc/pam.d/password-auth"
        else
            LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "/etc/pam.d/password-auth" | tail -n 1 | cut -d: -f 1)
            if [ ! -z $LAST_MATCH_LINE ]; then
                sed -i --follow-symlinks $LAST_MATCH_LINE' a password     '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' "/etc/pam.d/password-auth"
            else
                echo 'password    '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' >> "/etc/pam.d/password-auth"
            fi
        fi
    fi
fi

PWHISTORY_CONF="/etc/security/pwhistory.conf"
if [ -f $PWHISTORY_CONF ]; then
    regex="^\s*remember\s*="
    line="remember = $var_password_pam_remember"
    if ! grep -q $regex $PWHISTORY_CONF; then
        echo $line >> $PWHISTORY_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(remember\s*=\s*\)\(\S\+\)|\1'"$var_password_pam_remember"'|g' $PWHISTORY_CONF
    fi
    if [ -e "/etc/pam.d/password-auth" ] ; then
        PAM_FILE_PATH="/etc/pam.d/password-auth"
        if [ -f /usr/bin/authselect ]; then
            
            if ! authselect check; then
            echo "
            authselect integrity check failed. Remediation aborted!
            This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
            It is not recommended to manually edit the PAM files when authselect tool is available.
            In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
            exit 1
            fi

            CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
            # If not already in use, a custom profile is created preserving the enabled features.
            if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                authselect create-profile hardening -b $CURRENT_PROFILE
                CURRENT_PROFILE="custom/hardening"
                
                authselect apply-changes -b --backup=before-hardening-custom-profile
                authselect select $CURRENT_PROFILE
                for feature in $ENABLED_FEATURES; do
                    authselect enable-feature $feature;
                done
                
                authselect apply-changes -b --backup=after-hardening-custom-profile
            fi
            PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
            PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

            authselect apply-changes -b
        fi
        
    if grep -qP '^\s*password\s.*\bpam_pwhistory.so\s.*\bremember\b' "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks 's/(.*password.*pam_pwhistory.so.*)\bremember\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
    fi
        if [ -f /usr/bin/authselect ]; then
            
            authselect apply-changes -b
        fi
    else
        echo "/etc/pam.d/password-auth was not found" >&2
    fi
else
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*' "$PAM_FILE_PATH"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"requisite"' \2/' "$PAM_FILE_PATH"
        else
            echo 'password    '"requisite"'    pam_pwhistory.so' >> "$PAM_FILE_PATH"
        fi
    fi
    # Check the option
    if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*\sremember\b' "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks '/\s*password\s+'"requisite"'\s+pam_pwhistory.so.*/ s/$/ remember='"$var_password_pam_remember"'/' "$PAM_FILE_PATH"
    else
        sed -i -E --follow-symlinks 's/(\s*password\s+'"requisite"'\s+pam_pwhistory.so\s+.*)('"remember"'=)[[:alnum:]]+\s*(.*)/\1\2'"$var_password_pam_remember"' \3/' "$PAM_FILE_PATH"
    fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83478-8
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-08-020220
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
- name: XCCDF Value var_password_pam_remember # promote to variable
  set_fact:
    var_password_pam_remember: !!str 5
  tags:
    - always
- name: XCCDF Value var_password_pam_remember_control_flag # promote to variable
  set_fact:
    var_password_pam_remember_control_flag: !!str requisite,required
  tags:
    - always

- name: 'Limit Password Reuse: password-auth - Check if system relies on authselect
    tool'
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83478-8
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-08-020220
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: password-auth - Collect the available authselect features'
  ansible.builtin.command:
    cmd: authselect list-features minimal
  register: result_authselect_available_features
  changed_when: false
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CCE-83478-8
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-08-020220
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: password-auth - Enable pam_pwhistory.so using authselect
    feature'
  block:

  - name: 'Limit Password Reuse: password-auth - Check integrity of authselect current
      profile'
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: 'Limit Password Reuse: password-auth - Informative message based on the
      authselect integrity check result'
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: 'Limit Password Reuse: password-auth - Get authselect current features'
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: 'Limit Password Reuse: password-auth - Ensure "with-pwhistory" feature is
      enabled using authselect tool'
    ansible.builtin.command:
      cmd: authselect enable-feature with-pwhistory
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-pwhistory")

  - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  - result_authselect_available_features.stdout is search("with-pwhistory")
  tags:
  - CCE-83478-8
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-08-020220
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: password-auth - Enable pam_pwhistory.so in appropriate
    PAM files'
  block:

  - name: 'Limit Password Reuse: password-auth - Define the PAM file to be edited
      as a local fact'
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/password-auth

  - name: 'Limit Password Reuse: password-auth - Check if system relies on authselect
      tool'
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: 'Limit Password Reuse: password-auth - Ensure authselect custom profile
      is used if authselect is present'
    block:

    - name: 'Limit Password Reuse: password-auth - Check integrity of authselect current
        profile'
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: 'Limit Password Reuse: password-auth - Informative message based on the
        authselect integrity check result'
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: 'Limit Password Reuse: password-auth - Get authselect current profile'
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: 'Limit Password Reuse: password-auth - Define the current authselect profile
        as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: 'Limit Password Reuse: password-auth - Define the new authselect custom
        profile as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: 'Limit Password Reuse: password-auth - Get authselect current features
        to also enable them in the custom profile'
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: password-auth - Check if any custom profile with
        the same name was already created'
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: password-auth - Create an authselect custom profile
        based on the current profile'
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: password-auth - Ensure the authselect custom profile
        is selected'
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: password-auth - Restore the authselect features
        in the custom profile'
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: 'Limit Password Reuse: password-auth - Change the PAM file to be edited
        according to the custom authselect profile'
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: 'Limit Password Reuse: password-auth - Check if expected PAM module line
      is present in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ '{{ var_password_pam_remember_control_flag.split(",")[0]
        }}' | regex_escape() }}\s+pam_pwhistory.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: 'Limit Password Reuse: password-auth - Include or update the PAM module
      line in {{ pam_file_path }}'
    block:

    - name: 'Limit Password Reuse: password-auth - Check if required PAM module line
        is present in {{ pam_file_path }} with different control'
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: 'Limit Password Reuse: password-auth - Ensure the correct control for
        the required PAM module line in {{ pam_file_path }}'
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
        replace: \1{{ var_password_pam_remember_control_flag.split(",")[0] }} \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: 'Limit Password Reuse: password-auth - Ensure the required PAM module
        line is included in {{ pam_file_path }}'
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        insertafter: ^password.*requisite.*pam_pwquality\.so
        line: password    {{ var_password_pam_remember_control_flag.split(",")[0]
          }}    pam_pwhistory.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - |
    (result_authselect_available_features.stdout is defined and result_authselect_available_features.stdout is not search("with-pwhistory")) or result_authselect_available_features is not defined
  tags:
  - CCE-83478-8
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-08-020220
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: password-auth - Check the presence of /etc/security/pwhistory.conf
    file'
  ansible.builtin.stat:
    path: /etc/security/pwhistory.conf
  register: result_pwhistory_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83478-8
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-08-020220
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: password-auth - pam_pwhistory.so parameters are configured
    in /etc/security/pwhistory.conf file'
  block:

  - name: 'Limit Password Reuse: password-auth - Ensure the pam_pwhistory.so remember
      parameter in /etc/security/pwhistory.conf'
    ansible.builtin.lineinfile:
      path: /etc/security/pwhistory.conf
      regexp: ^\s*remember\s*=
      line: remember = {{ var_password_pam_remember }}
      state: present

  - name: 'Limit Password Reuse: password-auth - Ensure the pam_pwhistory.so remember
      parameter is removed from PAM files'
    block:

    - name: 'Limit Password Reuse: password-auth - Check if /etc/pam.d/password-auth
        file is present'
      ansible.builtin.stat:
        path: /etc/pam.d/password-auth
      register: result_pam_file_present

    - name: 'Limit Password Reuse: password-auth - Check the proper remediation for
        the system'
      block:

      - name: 'Limit Password Reuse: password-auth - Define the PAM file to be edited
          as a local fact'
        ansible.builtin.set_fact:
          pam_file_path: /etc/pam.d/password-auth

      - name: 'Limit Password Reuse: password-auth - Check if system relies on authselect
          tool'
        ansible.builtin.stat:
          path: /usr/bin/authselect
        register: result_authselect_present

      - name: 'Limit Password Reuse: password-auth - Ensure authselect custom profile
          is used if authselect is present'
        block:

        - name: 'Limit Password Reuse: password-auth - Check integrity of authselect
            current profile'
          ansible.builtin.command:
            cmd: authselect check
          register: result_authselect_check_cmd
          changed_when: false
          failed_when: false

        - name: 'Limit Password Reuse: password-auth - Informative message based on
            the authselect integrity check result'
          ansible.builtin.assert:
            that:
            - result_authselect_check_cmd.rc == 0
            fail_msg:
            - authselect integrity check failed. Remediation aborted!
            - This remediation could not be applied because an authselect profile
              was not selected or the selected profile is not intact.
            - It is not recommended to manually edit the PAM files when authselect
              tool is available.
            - In cases where the default authselect profile does not cover a specific
              demand, a custom authselect profile is recommended.
            success_msg:
            - authselect integrity check passed

        - name: 'Limit Password Reuse: password-auth - Get authselect current profile'
          ansible.builtin.shell:
            cmd: authselect current -r | awk '{ print $1 }'
          register: result_authselect_profile
          changed_when: false
          when:
          - result_authselect_check_cmd is success

        - name: 'Limit Password Reuse: password-auth - Define the current authselect
            profile as a local fact'
          ansible.builtin.set_fact:
            authselect_current_profile: '{{ result_authselect_profile.stdout }}'
            authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
          when:
          - result_authselect_profile is not skipped
          - result_authselect_profile.stdout is match("custom/")

        - name: 'Limit Password Reuse: password-auth - Define the new authselect custom
            profile as a local fact'
          ansible.builtin.set_fact:
            authselect_current_profile: '{{ result_authselect_profile.stdout }}'
            authselect_custom_profile: custom/hardening
          when:
          - result_authselect_profile is not skipped
          - result_authselect_profile.stdout is not match("custom/")

        - name: 'Limit Password Reuse: password-auth - Get authselect current features
            to also enable them in the custom profile'
          ansible.builtin.shell:
            cmd: authselect current | tail -n+3 | awk '{ print $2 }'
          register: result_authselect_features
          changed_when: false
          when:
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")

        - name: 'Limit Password Reuse: password-auth - Check if any custom profile
            with the same name was already created'
          ansible.builtin.stat:
            path: /etc/authselect/{{ authselect_custom_profile }}
          register: result_authselect_custom_profile_present
          changed_when: false
          when:
          - authselect_current_profile is not match("custom/")

        - name: 'Limit Password Reuse: password-auth - Create an authselect custom
            profile based on the current profile'
          ansible.builtin.command:
            cmd: authselect create-profile hardening -b {{ authselect_current_profile
              }}
          when:
          - result_authselect_check_cmd is success
          - authselect_current_profile is not match("custom/")
          - not result_authselect_custom_profile_present.stat.exists

        - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are
            applied'
          ansible.builtin.command:
            cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")
          - authselect_custom_profile is not match(authselect_current_profile)

        - name: 'Limit Password Reuse: password-auth - Ensure the authselect custom
            profile is selected'
          ansible.builtin.command:
            cmd: authselect select {{ authselect_custom_profile }}
          register: result_pam_authselect_select_profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")
          - authselect_custom_profile is not match(authselect_current_profile)

        - name: 'Limit Password Reuse: password-auth - Restore the authselect features
            in the custom profile'
          ansible.builtin.command:
            cmd: authselect enable-feature {{ item }}
          loop: '{{ result_authselect_features.stdout_lines }}'
          register: result_pam_authselect_restore_features
          when:
          - result_authselect_profile is not skipped
          - result_authselect_features is not skipped
          - result_pam_authselect_select_profile is not skipped

        - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are
            applied'
          ansible.builtin.command:
            cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - result_pam_authselect_restore_features is not skipped

        - name: 'Limit Password Reuse: password-auth - Change the PAM file to be edited
            according to the custom authselect profile'
          ansible.builtin.set_fact:
            pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
              | basename }}
        when:
        - result_authselect_present.stat.exists

      - name: 'Limit Password Reuse: password-auth - Ensure the "remember" option
          from "pam_pwhistory.so" is not present in {{ pam_file_path }}'
        ansible.builtin.replace:
          dest: '{{ pam_file_path }}'
          regexp: (.*password.*pam_pwhistory.so.*)\bremember\b=?[0-9a-zA-Z]*(.*)
          replace: \1\2
        register: result_pam_option_removal

      - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are
          applied'
        ansible.builtin.command:
          cmd: authselect apply-changes -b
        when:
        - result_authselect_present.stat.exists
        - result_pam_option_removal is changed
      when:
      - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_pwhistory_conf_check.stat.exists
  tags:
  - CCE-83478-8
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-08-020220
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: password-auth - pam_pwhistory.so parameters are configured
    in PAM files'
  block:

  - name: 'Limit Password Reuse: password-auth - Define the PAM file to be edited
      as a local fact'
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/password-auth

  - name: 'Limit Password Reuse: password-auth - Check if system relies on authselect
      tool'
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: 'Limit Password Reuse: password-auth - Ensure authselect custom profile
      is used if authselect is present'
    block:

    - name: 'Limit Password Reuse: password-auth - Check integrity of authselect current
        profile'
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: 'Limit Password Reuse: password-auth - Informative message based on the
        authselect integrity check result'
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: 'Limit Password Reuse: password-auth - Get authselect current profile'
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: 'Limit Password Reuse: password-auth - Define the current authselect profile
        as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: 'Limit Password Reuse: password-auth - Define the new authselect custom
        profile as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: 'Limit Password Reuse: password-auth - Get authselect current features
        to also enable them in the custom profile'
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: password-auth - Check if any custom profile with
        the same name was already created'
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: password-auth - Create an authselect custom profile
        based on the current profile'
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: password-auth - Ensure the authselect custom profile
        is selected'
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: password-auth - Restore the authselect features
        in the custom profile'
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: 'Limit Password Reuse: password-auth - Change the PAM file to be edited
        according to the custom authselect profile'
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: 'Limit Password Reuse: password-auth - Check if expected PAM module line
      is present in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ 'requisite' | regex_escape() }}\s+pam_pwhistory.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: 'Limit Password Reuse: password-auth - Include or update the PAM module
      line in {{ pam_file_path }}'
    block:

    - name: 'Limit Password Reuse: password-auth - Check if required PAM module line
        is present in {{ pam_file_path }} with different control'
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: 'Limit Password Reuse: password-auth - Ensure the correct control for
        the required PAM module line in {{ pam_file_path }}'
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
        replace: \1requisite \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: 'Limit Password Reuse: password-auth - Ensure the required PAM module
        line is included in {{ pam_file_path }}'
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        line: password    requisite    pam_pwhistory.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0

  - name: 'Limit Password Reuse: password-auth - Check if the required PAM module
      option is present in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ 'requisite' | regex_escape() }}\s+pam_pwhistory.so\s*.*\sremember\b
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_module_remember_option_present

  - name: 'Limit Password Reuse: password-auth - Ensure the "remember" PAM option
      for "pam_pwhistory.so" is included in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+{{ 'requisite' | regex_escape() }}\s+pam_pwhistory.so.*)
      line: \1 remember={{ var_password_pam_remember }}
      state: present
    register: result_pam_remember_add
    when:
    - result_pam_module_remember_option_present.found == 0

  - name: 'Limit Password Reuse: password-auth - Ensure the required value for "remember"
      PAM option from "pam_pwhistory.so" in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+{{ 'requisite' | regex_escape() }}\s+pam_pwhistory.so\s+.*)(remember)=[0-9a-zA-Z]+\s*(.*)
      line: \1\2={{ var_password_pam_remember }} \3
    register: result_pam_remember_edit
    when:
    - result_pam_module_remember_option_present.found > 0

  - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - (result_pam_remember_add is defined and result_pam_remember_add.changed) or
      (result_pam_remember_edit is defined and result_pam_remember_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - not result_pwhistory_conf_check.stat.exists
  tags:
  - CCE-83478-8
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-08-020220
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

Rule   Limit Password Reuse: system-auth   [ref]

Do not allow users to reuse recent passwords. This can be accomplished by using the remember option for the pam_pwhistory PAM module.

On systems with newer versions of authselect, the pam_pwhistory PAM module can be enabled via authselect feature:
authselect enable-feature with-pwhistory
Otherwise, it should be enabled using an authselect custom profile.

Newer systems also have the /etc/security/pwhistory.conf file for setting pam_pwhistory module options. This file should be used whenever available. Otherwise, the pam_pwhistory module options can be set in PAM files.

The value for remember option must be equal or greater than 5
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report.
Warning:  Newer versions of authselect contain an authselect feature to easily and properly enable pam_pwhistory.so module. If this feature is not yet available in your system, an authselect custom profile must be used to avoid integrity issues in PAM files.
Rationale:
Preventing re-use of previous passwords helps ensure that a compromised password is not re-used by a user.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_pwhistory_remember_system_auth
Identifiers and References

Identifiers:  CCE-83480-4

References:  1, 12, 15, 16, 5, 5.6.2.1.1, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.5.8, CCI-000200, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(f), IA-5(1)(e), PR.AC-1, PR.AC-6, PR.AC-7, Req-8.2.5, SRG-OS-000077-GPOS-00045, RHEL-08-020221, 5.5.3, SV-251717r902749_rule


# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_remember='5'
var_password_pam_remember_control_flag='requisite,required'


var_password_pam_remember_control_flag="$(echo $var_password_pam_remember_control_flag | cut -d \, -f 1)"

if [ -f /usr/bin/authselect ]; then
    if authselect list-features minimal | grep -q with-pwhistory; then
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi
        authselect enable-feature with-pwhistory

        authselect apply-changes -b
    else
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
        if ! grep -qP '^\s*password\s+'"$var_password_pam_remember_control_flag"'\s+pam_pwhistory.so\s*.*' "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"$var_password_pam_remember_control_flag"' \2/' "$PAM_FILE_PATH"
            else
                LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                if [ ! -z $LAST_MATCH_LINE ]; then
                    sed -i --follow-symlinks $LAST_MATCH_LINE' a password     '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' "$PAM_FILE_PATH"
                else
                    echo 'password    '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' >> "$PAM_FILE_PATH"
                fi
            fi
        fi
    fi
else
    if ! grep -qP '^\s*password\s+'"$var_password_pam_remember_control_flag"'\s+pam_pwhistory.so\s*.*' "/etc/pam.d/system-auth"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "/etc/pam.d/system-auth")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"$var_password_pam_remember_control_flag"' \2/' "/etc/pam.d/system-auth"
        else
            LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "/etc/pam.d/system-auth" | tail -n 1 | cut -d: -f 1)
            if [ ! -z $LAST_MATCH_LINE ]; then
                sed -i --follow-symlinks $LAST_MATCH_LINE' a password     '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' "/etc/pam.d/system-auth"
            else
                echo 'password    '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' >> "/etc/pam.d/system-auth"
            fi
        fi
    fi
fi

PWHISTORY_CONF="/etc/security/pwhistory.conf"
if [ -f $PWHISTORY_CONF ]; then
    regex="^\s*remember\s*="
    line="remember = $var_password_pam_remember"
    if ! grep -q $regex $PWHISTORY_CONF; then
        echo $line >> $PWHISTORY_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(remember\s*=\s*\)\(\S\+\)|\1'"$var_password_pam_remember"'|g' $PWHISTORY_CONF
    fi
    if [ -e "/etc/pam.d/system-auth" ] ; then
        PAM_FILE_PATH="/etc/pam.d/system-auth"
        if [ -f /usr/bin/authselect ]; then
            
            if ! authselect check; then
            echo "
            authselect integrity check failed. Remediation aborted!
            This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
            It is not recommended to manually edit the PAM files when authselect tool is available.
            In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
            exit 1
            fi

            CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
            # If not already in use, a custom profile is created preserving the enabled features.
            if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                authselect create-profile hardening -b $CURRENT_PROFILE
                CURRENT_PROFILE="custom/hardening"
                
                authselect apply-changes -b --backup=before-hardening-custom-profile
                authselect select $CURRENT_PROFILE
                for feature in $ENABLED_FEATURES; do
                    authselect enable-feature $feature;
                done
                
                authselect apply-changes -b --backup=after-hardening-custom-profile
            fi
            PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
            PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

            authselect apply-changes -b
        fi
        
    if grep -qP '^\s*password\s.*\bpam_pwhistory.so\s.*\bremember\b' "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks 's/(.*password.*pam_pwhistory.so.*)\bremember\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
    fi
        if [ -f /usr/bin/authselect ]; then
            
            authselect apply-changes -b
        fi
    else
        echo "/etc/pam.d/system-auth was not found" >&2
    fi
else
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*' "$PAM_FILE_PATH"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"requisite"' \2/' "$PAM_FILE_PATH"
        else
            echo 'password    '"requisite"'    pam_pwhistory.so' >> "$PAM_FILE_PATH"
        fi
    fi
    # Check the option
    if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*\sremember\b' "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks '/\s*password\s+'"requisite"'\s+pam_pwhistory.so.*/ s/$/ remember='"$var_password_pam_remember"'/' "$PAM_FILE_PATH"
    else
        sed -i -E --follow-symlinks 's/(\s*password\s+'"requisite"'\s+pam_pwhistory.so\s+.*)('"remember"'=)[[:alnum:]]+\s*(.*)/\1\2'"$var_password_pam_remember"' \3/' "$PAM_FILE_PATH"
    fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83480-4
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-08-020221
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
- name: XCCDF Value var_password_pam_remember # promote to variable
  set_fact:
    var_password_pam_remember: !!str 5
  tags:
    - always
- name: XCCDF Value var_password_pam_remember_control_flag # promote to variable
  set_fact:
    var_password_pam_remember_control_flag: !!str requisite,required
  tags:
    - always

- name: 'Limit Password Reuse: system-auth - Check if system relies on authselect
    tool'
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83480-4
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-08-020221
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: system-auth - Collect the available authselect features'
  ansible.builtin.command:
    cmd: authselect list-features minimal
  register: result_authselect_available_features
  changed_when: false
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CCE-83480-4
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-08-020221
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: system-auth - Enable pam_pwhistory.so using authselect
    feature'
  block:

  - name: 'Limit Password Reuse: system-auth - Check integrity of authselect current
      profile'
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: 'Limit Password Reuse: system-auth - Informative message based on the authselect
      integrity check result'
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: 'Limit Password Reuse: system-auth - Get authselect current features'
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: 'Limit Password Reuse: system-auth - Ensure "with-pwhistory" feature is
      enabled using authselect tool'
    ansible.builtin.command:
      cmd: authselect enable-feature with-pwhistory
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-pwhistory")

  - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  - result_authselect_available_features.stdout is search("with-pwhistory")
  tags:
  - CCE-83480-4
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-08-020221
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: system-auth - Enable pam_pwhistory.so in appropriate
    PAM files'
  block:

  - name: 'Limit Password Reuse: system-auth - Define the PAM file to be edited as
      a local fact'
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: 'Limit Password Reuse: system-auth - Check if system relies on authselect
      tool'
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: 'Limit Password Reuse: system-auth - Ensure authselect custom profile is
      used if authselect is present'
    block:

    - name: 'Limit Password Reuse: system-auth - Check integrity of authselect current
        profile'
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: 'Limit Password Reuse: system-auth - Informative message based on the
        authselect integrity check result'
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: 'Limit Password Reuse: system-auth - Get authselect current profile'
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: 'Limit Password Reuse: system-auth - Define the current authselect profile
        as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: 'Limit Password Reuse: system-auth - Define the new authselect custom
        profile as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: 'Limit Password Reuse: system-auth - Get authselect current features to
        also enable them in the custom profile'
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: system-auth - Check if any custom profile with
        the same name was already created'
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: system-auth - Create an authselect custom profile
        based on the current profile'
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: system-auth - Ensure the authselect custom profile
        is selected'
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: system-auth - Restore the authselect features in
        the custom profile'
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: 'Limit Password Reuse: system-auth - Change the PAM file to be edited
        according to the custom authselect profile'
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: 'Limit Password Reuse: system-auth - Check if expected PAM module line is
      present in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ '{{ var_password_pam_remember_control_flag.split(",")[0]
        }}' | regex_escape() }}\s+pam_pwhistory.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: 'Limit Password Reuse: system-auth - Include or update the PAM module line
      in {{ pam_file_path }}'
    block:

    - name: 'Limit Password Reuse: system-auth - Check if required PAM module line
        is present in {{ pam_file_path }} with different control'
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: 'Limit Password Reuse: system-auth - Ensure the correct control for the
        required PAM module line in {{ pam_file_path }}'
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
        replace: \1{{ var_password_pam_remember_control_flag.split(",")[0] }} \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: 'Limit Password Reuse: system-auth - Ensure the required PAM module line
        is included in {{ pam_file_path }}'
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        insertafter: ^password.*requisite.*pam_pwquality\.so
        line: password    {{ var_password_pam_remember_control_flag.split(",")[0]
          }}    pam_pwhistory.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - |
    (result_authselect_available_features.stdout is defined and result_authselect_available_features.stdout is not search("with-pwhistory")) or result_authselect_available_features is not defined
  tags:
  - CCE-83480-4
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-08-020221
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: system-auth - Check the presence of /etc/security/pwhistory.conf
    file'
  ansible.builtin.stat:
    path: /etc/security/pwhistory.conf
  register: result_pwhistory_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83480-4
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-08-020221
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: system-auth - pam_pwhistory.so parameters are configured
    in /etc/security/pwhistory.conf file'
  block:

  - name: 'Limit Password Reuse: system-auth - Ensure the pam_pwhistory.so remember
      parameter in /etc/security/pwhistory.conf'
    ansible.builtin.lineinfile:
      path: /etc/security/pwhistory.conf
      regexp: ^\s*remember\s*=
      line: remember = {{ var_password_pam_remember }}
      state: present

  - name: 'Limit Password Reuse: system-auth - Ensure the pam_pwhistory.so remember
      parameter is removed from PAM files'
    block:

    - name: 'Limit Password Reuse: system-auth - Check if /etc/pam.d/system-auth file
        is present'
      ansible.builtin.stat:
        path: /etc/pam.d/system-auth
      register: result_pam_file_present

    - name: 'Limit Password Reuse: system-auth - Check the proper remediation for
        the system'
      block:

      - name: 'Limit Password Reuse: system-auth - Define the PAM file to be edited
          as a local fact'
        ansible.builtin.set_fact:
          pam_file_path: /etc/pam.d/system-auth

      - name: 'Limit Password Reuse: system-auth - Check if system relies on authselect
          tool'
        ansible.builtin.stat:
          path: /usr/bin/authselect
        register: result_authselect_present

      - name: 'Limit Password Reuse: system-auth - Ensure authselect custom profile
          is used if authselect is present'
        block:

        - name: 'Limit Password Reuse: system-auth - Check integrity of authselect
            current profile'
          ansible.builtin.command:
            cmd: authselect check
          register: result_authselect_check_cmd
          changed_when: false
          failed_when: false

        - name: 'Limit Password Reuse: system-auth - Informative message based on
            the authselect integrity check result'
          ansible.builtin.assert:
            that:
            - result_authselect_check_cmd.rc == 0
            fail_msg:
            - authselect integrity check failed. Remediation aborted!
            - This remediation could not be applied because an authselect profile
              was not selected or the selected profile is not intact.
            - It is not recommended to manually edit the PAM files when authselect
              tool is available.
            - In cases where the default authselect profile does not cover a specific
              demand, a custom authselect profile is recommended.
            success_msg:
            - authselect integrity check passed

        - name: 'Limit Password Reuse: system-auth - Get authselect current profile'
          ansible.builtin.shell:
            cmd: authselect current -r | awk '{ print $1 }'
          register: result_authselect_profile
          changed_when: false
          when:
          - result_authselect_check_cmd is success

        - name: 'Limit Password Reuse: system-auth - Define the current authselect
            profile as a local fact'
          ansible.builtin.set_fact:
            authselect_current_profile: '{{ result_authselect_profile.stdout }}'
            authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
          when:
          - result_authselect_profile is not skipped
          - result_authselect_profile.stdout is match("custom/")

        - name: 'Limit Password Reuse: system-auth - Define the new authselect custom
            profile as a local fact'
          ansible.builtin.set_fact:
            authselect_current_profile: '{{ result_authselect_profile.stdout }}'
            authselect_custom_profile: custom/hardening
          when:
          - result_authselect_profile is not skipped
          - result_authselect_profile.stdout is not match("custom/")

        - name: 'Limit Password Reuse: system-auth - Get authselect current features
            to also enable them in the custom profile'
          ansible.builtin.shell:
            cmd: authselect current | tail -n+3 | awk '{ print $2 }'
          register: result_authselect_features
          changed_when: false
          when:
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")

        - name: 'Limit Password Reuse: system-auth - Check if any custom profile with
            the same name was already created'
          ansible.builtin.stat:
            path: /etc/authselect/{{ authselect_custom_profile }}
          register: result_authselect_custom_profile_present
          changed_when: false
          when:
          - authselect_current_profile is not match("custom/")

        - name: 'Limit Password Reuse: system-auth - Create an authselect custom profile
            based on the current profile'
          ansible.builtin.command:
            cmd: authselect create-profile hardening -b {{ authselect_current_profile
              }}
          when:
          - result_authselect_check_cmd is success
          - authselect_current_profile is not match("custom/")
          - not result_authselect_custom_profile_present.stat.exists

        - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are
            applied'
          ansible.builtin.command:
            cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")
          - authselect_custom_profile is not match(authselect_current_profile)

        - name: 'Limit Password Reuse: system-auth - Ensure the authselect custom
            profile is selected'
          ansible.builtin.command:
            cmd: authselect select {{ authselect_custom_profile }}
          register: result_pam_authselect_select_profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")
          - authselect_custom_profile is not match(authselect_current_profile)

        - name: 'Limit Password Reuse: system-auth - Restore the authselect features
            in the custom profile'
          ansible.builtin.command:
            cmd: authselect enable-feature {{ item }}
          loop: '{{ result_authselect_features.stdout_lines }}'
          register: result_pam_authselect_restore_features
          when:
          - result_authselect_profile is not skipped
          - result_authselect_features is not skipped
          - result_pam_authselect_select_profile is not skipped

        - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are
            applied'
          ansible.builtin.command:
            cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - result_pam_authselect_restore_features is not skipped

        - name: 'Limit Password Reuse: system-auth - Change the PAM file to be edited
            according to the custom authselect profile'
          ansible.builtin.set_fact:
            pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
              | basename }}
        when:
        - result_authselect_present.stat.exists

      - name: 'Limit Password Reuse: system-auth - Ensure the "remember" option from
          "pam_pwhistory.so" is not present in {{ pam_file_path }}'
        ansible.builtin.replace:
          dest: '{{ pam_file_path }}'
          regexp: (.*password.*pam_pwhistory.so.*)\bremember\b=?[0-9a-zA-Z]*(.*)
          replace: \1\2
        register: result_pam_option_removal

      - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
        ansible.builtin.command:
          cmd: authselect apply-changes -b
        when:
        - result_authselect_present.stat.exists
        - result_pam_option_removal is changed
      when:
      - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_pwhistory_conf_check.stat.exists
  tags:
  - CCE-83480-4
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-08-020221
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: system-auth - pam_pwhistory.so parameters are configured
    in PAM files'
  block:

  - name: 'Limit Password Reuse: system-auth - Define the PAM file to be edited as
      a local fact'
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: 'Limit Password Reuse: system-auth - Check if system relies on authselect
      tool'
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: 'Limit Password Reuse: system-auth - Ensure authselect custom profile is
      used if authselect is present'
    block:

    - name: 'Limit Password Reuse: system-auth - Check integrity of authselect current
        profile'
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: 'Limit Password Reuse: system-auth - Informative message based on the
        authselect integrity check result'
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: 'Limit Password Reuse: system-auth - Get authselect current profile'
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: 'Limit Password Reuse: system-auth - Define the current authselect profile
        as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: 'Limit Password Reuse: system-auth - Define the new authselect custom
        profile as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: 'Limit Password Reuse: system-auth - Get authselect current features to
        also enable them in the custom profile'
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: system-auth - Check if any custom profile with
        the same name was already created'
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: system-auth - Create an authselect custom profile
        based on the current profile'
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: system-auth - Ensure the authselect custom profile
        is selected'
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: system-auth - Restore the authselect features in
        the custom profile'
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: 'Limit Password Reuse: system-auth - Change the PAM file to be edited
        according to the custom authselect profile'
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: 'Limit Password Reuse: system-auth - Check if expected PAM module line is
      present in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ 'requisite' | regex_escape() }}\s+pam_pwhistory.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: 'Limit Password Reuse: system-auth - Include or update the PAM module line
      in {{ pam_file_path }}'
    block:

    - name: 'Limit Password Reuse: system-auth - Check if required PAM module line
        is present in {{ pam_file_path }} with different control'
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: 'Limit Password Reuse: system-auth - Ensure the correct control for the
        required PAM module line in {{ pam_file_path }}'
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
        replace: \1requisite \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: 'Limit Password Reuse: system-auth - Ensure the required PAM module line
        is included in {{ pam_file_path }}'
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        line: password    requisite    pam_pwhistory.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0

  - name: 'Limit Password Reuse: system-auth - Check if the required PAM module option
      is present in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ 'requisite' | regex_escape() }}\s+pam_pwhistory.so\s*.*\sremember\b
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_module_remember_option_present

  - name: 'Limit Password Reuse: system-auth - Ensure the "remember" PAM option for
      "pam_pwhistory.so" is included in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+{{ 'requisite' | regex_escape() }}\s+pam_pwhistory.so.*)
      line: \1 remember={{ var_password_pam_remember }}
      state: present
    register: result_pam_remember_add
    when:
    - result_pam_module_remember_option_present.found == 0

  - name: 'Limit Password Reuse: system-auth - Ensure the required value for "remember"
      PAM option from "pam_pwhistory.so" in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+{{ 'requisite' | regex_escape() }}\s+pam_pwhistory.so\s+.*)(remember)=[0-9a-zA-Z]+\s*(.*)
      line: \1\2={{ var_password_pam_remember }} \3
    register: result_pam_remember_edit
    when:
    - result_pam_module_remember_option_present.found > 0

  - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - (result_pam_remember_add is defined and result_pam_remember_add.changed) or
      (result_pam_remember_edit is defined and result_pam_remember_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - not result_pwhistory_conf_check.stat.exists
  tags:
  - CCE-83480-4
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-08-020221
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

Rule   Lock Accounts After Failed Password Attempts   [ref]

This rule configures the system to lock out accounts after a number of incorrect login attempts using pam_faillock.so. pam_faillock.so module requires multiple entries in pam files. These entries must be carefully defined to work as expected. Ensure that the file /etc/security/faillock.conf contains the following entry: deny = <count> Where count should be less than or equal to 3 and greater than 0. In order to avoid errors when manually editing these files, it is recommended to use the appropriate tools, such as authselect or authconfig, depending on the OS version.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. If the system supports the /etc/security/faillock.conf file, the pam_faillock parameters should be defined in faillock.conf file.
Rationale:
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, also known as brute-forcing, is reduced. Limits are imposed by locking the account.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny
Identifiers and References

Identifiers:  CCE-80667-9

References:  BP28(R18), 1, 12, 15, 16, 5.5.3, DSS05.04, DSS05.10, DSS06.10, 3.1.8, CCI-000044, CCI-002236, CCI-002237, CCI-002238, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), AC-7(a), PR.AC-7, FIA_AFL.1, Req-8.1.6, 8.3.4, SRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005, RHEL-08-020011, 5.4.2, 5.5.2, SV-230333r743966_rule


# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_faillock_deny='3'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*deny\s*="
    line="deny = $var_accounts_passwords_pam_faillock_deny"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(deny\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_deny"'|g' $FAILLOCK_CONF
    fi
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP '^\s*auth\s.*\bpam_faillock.so\s.*\bdeny\b' "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks 's/(.*auth.*pam_faillock.so.*)\bdeny\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so (preauth|authfail).*deny' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*silent.*/ s/$/ deny='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ deny='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*silent.*\)\('"deny"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_deny"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"deny"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_deny"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-80667-9
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020011
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Check if system relies on authselect
    tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-80667-9
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020011
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Remediation where authselect
    tool is present
  block:

  - name: Lock Accounts After Failed Password Attempts - Check integrity of authselect
      current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Lock Accounts After Failed Password Attempts - Informative message based
      on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Lock Accounts After Failed Password Attempts - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Lock Accounts After Failed Password Attempts - Ensure "with-faillock" feature
      is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-faillock
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-faillock")

  - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
      are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CCE-80667-9
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020011
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Remediation where authselect
    tool is not present
  block:

  - name: Lock Accounts After Failed Password Attempts - Check if pam_faillock.so
      is already enabled
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail)
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_is_enabled

  - name: Lock Accounts After Failed Password Attempts - Enable pam_faillock.so preauth
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so preauth
      insertbefore: ^auth.*sufficient.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Lock Accounts After Failed Password Attempts - Enable pam_faillock.so authfail
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so authfail
      insertbefore: ^auth.*required.*pam_deny\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Lock Accounts After Failed Password Attempts - Enable pam_faillock.so account
      section editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: account     required      pam_faillock.so
      insertbefore: ^account.*required.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_authselect_present.stat.exists
  tags:
  - CCE-80667-9
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020011
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_deny # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_deny: !!str 3
  tags:
    - always

- name: Lock Accounts After Failed Password Attempts - Check the presence of /etc/security/faillock.conf
    file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-80667-9
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020011
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Ensure the pam_faillock.so
    deny parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*deny\s*=
    line: deny = {{ var_accounts_passwords_pam_faillock_deny }}
    state: present
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CCE-80667-9
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020011
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Ensure the pam_faillock.so
    deny parameter not in PAM files
  block:

  - name: Lock Accounts After Failed Password Attempts - Check if /etc/pam.d/system-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/system-auth
    register: result_pam_file_present

  - name: Lock Accounts After Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Lock Accounts After Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/system-auth

    - name: Lock Accounts After Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Lock Accounts After Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Lock Accounts After Failed Password Attempts - Informative message based
          on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Lock Accounts After Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Check if any custom profile
          with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Lock Accounts After Failed Password Attempts - Change the PAM file to
          be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Lock Accounts After Failed Password Attempts - Ensure the "deny" option
        from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bdeny\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists

  - name: Lock Accounts After Failed Password Attempts - Check if /etc/pam.d/password-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/password-auth
    register: result_pam_file_present

  - name: Lock Accounts After Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Lock Accounts After Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/password-auth

    - name: Lock Accounts After Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Lock Accounts After Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Lock Accounts After Failed Password Attempts - Informative message based
          on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Lock Accounts After Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Check if any custom profile
          with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Lock Accounts After Failed Password Attempts - Change the PAM file to
          be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Lock Accounts After Failed Password Attempts - Ensure the "deny" option
        from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bdeny\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CCE-80667-9
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020011
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Ensure the pam_faillock.so
    deny parameter in PAM files
  block:

  - name: Lock Accounts After Failed Password Attempts - Check if pam_faillock.so
      deny parameter is already enabled in pam files
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail).*deny
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_deny_parameter_is_present

  - name: Lock Accounts After Failed Password Attempts - Ensure the inclusion of pam_faillock.so
      preauth deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
      line: \1required\3 deny={{ var_accounts_passwords_pam_faillock_deny }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found == 0

  - name: Lock Accounts After Failed Password Attempts - Ensure the inclusion of pam_faillock.so
      authfail deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
      line: \1required\3 deny={{ var_accounts_passwords_pam_faillock_deny }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found == 0

  - name: Lock Accounts After Failed Password Attempts - Ensure the desired value
      for pam_faillock.so preauth deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)(deny)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_deny }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found > 0

  - name: Lock Accounts After Failed Password Attempts - Ensure the desired value
      for pam_faillock.so authfail deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)(deny)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_deny }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found > 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_faillock_conf_check.stat.exists
  tags:
  - CCE-80667-9
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020011
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Rule   Set Lockout Time for Failed Password Attempts   [ref]

This rule configures the system to lock out accounts during a specified time period after a number of incorrect login attempts using pam_faillock.so. Ensure that the file /etc/security/faillock.conf contains the following entry: unlock_time=<interval-in-seconds> where interval-in-seconds is 900 or greater. pam_faillock.so module requires multiple entries in pam files. These entries must be carefully defined to work as expected. In order to avoid any errors when manually editing these files, it is recommended to use the appropriate tools, such as authselect or authconfig, depending on the OS version. If unlock_time is set to 0, manual intervention by an administrator is required to unlock a user. This should be done using the faillock tool.
Warning:  If the system supports the new /etc/security/faillock.conf file but the pam_faillock.so parameters are defined directly in /etc/pam.d/system-auth and /etc/pam.d/password-auth, the remediation will migrate the unlock_time parameter to /etc/security/faillock.conf to ensure compatibility with authselect tool. The parameters deny and fail_interval, if used, also have to be migrated by their respective remediation.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. If the system supports the /etc/security/faillock.conf file, the pam_faillock parameters should be defined in faillock.conf file.
Rationale:
By limiting the number of failed logon attempts the risk of unauthorized system access via user password guessing, otherwise known as brute-forcing, is reduced. Limits are imposed by locking the account.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_unlock_time
Identifiers and References

Identifiers:  CCE-80670-3

References:  BP28(R18), 1, 12, 15, 16, 5.5.3, DSS05.04, DSS05.10, DSS06.10, 3.1.8, CCI-000044, CCI-002236, CCI-002237, CCI-002238, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), AC-7(b), PR.AC-7, FIA_AFL.1, Req-8.1.7, 8.3.4, SRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005, RHEL-08-020014, RHEL-08-020015, 5.5.2, SV-230336r627750_rule, SV-230337r743972_rule


# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_faillock_unlock_time='900'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*unlock_time\s*="
    line="unlock_time = $var_accounts_passwords_pam_faillock_unlock_time"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(unlock_time\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_unlock_time"'|g' $FAILLOCK_CONF
    fi
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP '^\s*auth\s.*\bpam_faillock.so\s.*\bunlock_time\b' "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks 's/(.*auth.*pam_faillock.so.*)\bunlock_time\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so (preauth|authfail).*unlock_time' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*silent.*/ s/$/ unlock_time='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ unlock_time='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*silent.*\)\('"unlock_time"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"unlock_time"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-80670-3
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020014
  - DISA-STIG-RHEL-08-020015
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Check if system relies on
    authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-80670-3
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020014
  - DISA-STIG-RHEL-08-020015
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Remediation where authselect
    tool is present
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check integrity of authselect
      current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Set Lockout Time for Failed Password Attempts - Informative message based
      on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Set Lockout Time for Failed Password Attempts - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Set Lockout Time for Failed Password Attempts - Ensure "with-faillock" feature
      is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-faillock
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-faillock")

  - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
      are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CCE-80670-3
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020014
  - DISA-STIG-RHEL-08-020015
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Remediation where authselect
    tool is not present
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check if pam_faillock.so
      is already enabled
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail)
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_is_enabled

  - name: Set Lockout Time for Failed Password Attempts - Enable pam_faillock.so preauth
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so preauth
      insertbefore: ^auth.*sufficient.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Enable pam_faillock.so authfail
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so authfail
      insertbefore: ^auth.*required.*pam_deny\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Enable pam_faillock.so account
      section editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: account     required      pam_faillock.so
      insertbefore: ^account.*required.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_authselect_present.stat.exists
  tags:
  - CCE-80670-3
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020014
  - DISA-STIG-RHEL-08-020015
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_unlock_time # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_unlock_time: !!str 900
  tags:
    - always

- name: Set Lockout Time for Failed Password Attempts - Check the presence of /etc/security/faillock.conf
    file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-80670-3
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020014
  - DISA-STIG-RHEL-08-020015
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Ensure the pam_faillock.so
    unlock_time parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*unlock_time\s*=
    line: unlock_time = {{ var_accounts_passwords_pam_faillock_unlock_time }}
    state: present
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CCE-80670-3
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020014
  - DISA-STIG-RHEL-08-020015
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Ensure the pam_faillock.so
    unlock_time parameter not in PAM files
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check if /etc/pam.d/system-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/system-auth
    register: result_pam_file_present

  - name: Set Lockout Time for Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Set Lockout Time for Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/system-auth

    - name: Set Lockout Time for Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Set Lockout Time for Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Set Lockout Time for Failed Password Attempts - Informative message
          based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Set Lockout Time for Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Check if any custom
          profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Change the PAM file
          to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Set Lockout Time for Failed Password Attempts - Ensure the "unlock_time"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bunlock_time\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists

  - name: Set Lockout Time for Failed Password Attempts - Check if /etc/pam.d/password-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/password-auth
    register: result_pam_file_present

  - name: Set Lockout Time for Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Set Lockout Time for Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/password-auth

    - name: Set Lockout Time for Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Set Lockout Time for Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Set Lockout Time for Failed Password Attempts - Informative message
          based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Set Lockout Time for Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Check if any custom
          profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Change the PAM file
          to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Set Lockout Time for Failed Password Attempts - Ensure the "unlock_time"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bunlock_time\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CCE-80670-3
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020014
  - DISA-STIG-RHEL-08-020015
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Ensure the pam_faillock.so
    unlock_time parameter in PAM files
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check if pam_faillock.so
      unlock_time parameter is already enabled in pam files
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail).*unlock_time
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_unlock_time_parameter_is_present

  - name: Set Lockout Time for Failed Password Attempts - Ensure the inclusion of
      pam_faillock.so preauth unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
      line: \1required\3 unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
        }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Ensure the inclusion of
      pam_faillock.so authfail unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
      line: \1required\3 unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
        }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Ensure the desired value
      for pam_faillock.so preauth unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)(unlock_time)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_unlock_time }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found > 0

  - name: Set Lockout Time for Failed Password Attempts - Ensure the desired value
      for pam_faillock.so authfail unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)(unlock_time)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_unlock_time }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found > 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_faillock_conf_check.stat.exists
  tags:
  - CCE-80670-3
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020014
  - DISA-STIG-RHEL-08-020015
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
Group   Set Password Quality Requirements   Group contains 1 group and 3 rules
[ref]   The default pam_pwquality PAM module provides strength checking for passwords. It performs a number of checks, such as making sure passwords are not similar to dictionary words, are of at least a certain length, are not the previous password reversed, and are not simply a change of case from the previous password. It can also require passwords to be in certain character classes. The pam_pwquality module is the preferred way of configuring password requirements.

The man pages pam_pwquality(8) provide information on the capabilities and configuration of each.
Group   Set Password Quality Requirements with pam_pwquality   Group contains 3 rules
[ref]   The pam_pwquality PAM module can be configured to meet requirements for a variety of policies.

For example, to configure pam_pwquality to require at least one uppercase character, lowercase character, digit, and other (special) character, make sure that pam_pwquality exists in /etc/pam.d/system-auth:
password    requisite     pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=
If no such line exists, add one as the first line of the password section in /etc/pam.d/system-auth. Next, modify the settings in /etc/security/pwquality.conf to match the following:
difok = 4
minlen = 14
dcredit = -1
ucredit = -1
lcredit = -1
ocredit = -1
maxrepeat = 3
The arguments can be modified to ensure compliance with your organization's security policy. Discussion of each parameter follows.

Rule   Ensure PAM Enforces Password Requirements - Minimum Different Categories   [ref]

The pam_pwquality module's minclass parameter controls requirements for usage of different character classes, or types, of character that must exist in a password before it is considered valid. For example, setting this value to three (3) requires that any password must have characters from at least three different categories in order to be approved. The default value is zero (0), meaning there are no required classes. There are four categories available:
* Upper-case characters
* Lower-case characters
* Digits
* Special characters (for example, punctuation)
Modify the minclass setting in /etc/security/pwquality.conf entry to require 4 differing categories of characters when changing passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.

Requiring a minimum number of character categories makes password guessing attacks more difficult by ensuring a larger search space.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_minclass
Identifiers and References

Identifiers:  CCE-82046-4

References:  1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000195, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, SRG-OS-000072-GPOS-00040, RHEL-08-020160, 5.5.1, SV-230362r858781_rule


Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_minclass='4'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^minclass")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_minclass"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^minclass\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^minclass\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    cce="CCE-82046-4"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-82046-4
  - DISA-STIG-RHEL-08-020160
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_minclass
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_minclass # promote to variable
  set_fact:
    var_password_pam_minclass: !!str 4
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Different Categories -
    Ensure PAM variable minclass is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*minclass
    line: minclass = {{ var_password_pam_minclass }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-82046-4
  - DISA-STIG-RHEL-08-020160
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_minclass
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Rule   Ensure PAM Enforces Password Requirements - Minimum Length   [ref]

The pam_pwquality module's minlen parameter controls requirements for minimum characters required in a password. Add minlen=14 after pam_pwquality to set minimum password length requirements.
Rationale:
The shorter the password, the lower the number of possible combinations that need to be tested before the password is compromised.
Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password length is one factor of several that helps to determine strength and how long it takes to crack a password. Use of more characters in a password helps to exponentially increase the time and/or resources required to compromise the password.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_minlen
Identifiers and References

Identifiers:  CCE-80656-2

References:  BP28(R18), 1, 12, 15, 16, 5, 5.6.2.1.1, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000205, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_SMF_EXT.1, Req-8.2.3, 8.3.6, 8.3.9, SRG-OS-000078-GPOS-00046, RHEL-08-020230, 5.5.1, SV-230369r858785_rule


Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_minlen='14'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^minlen")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_minlen"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^minlen\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^minlen\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    cce="CCE-80656-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-80656-2
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-08-020230
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_minlen # promote to variable
  set_fact:
    var_password_pam_minlen: !!str 14
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Length - Ensure PAM variable
    minlen is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*minlen
    line: minlen = {{ var_password_pam_minlen }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-80656-2
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-08-020230
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Rule   Ensure PAM Enforces Password Requirements - Authentication Retry Prompts Permitted Per-Session   [ref]

To configure the number of retry prompts that are permitted per-session: Edit the /etc/security/pwquality.conf to include retry=3, or a lower value if site policy is more restrictive. The DoD requirement is a maximum of 3 prompts per session.
Rationale:
Setting the password retry prompts that are permitted on a per-session basis to a low value requires some software, such as SSH, to re-connect. This can slow down and draw additional attention to some types of password-guessing attacks. Note that this is different from account lockout, which is provided by the pam_faillock module.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_retry
Identifiers and References

Identifiers:  CCE-80664-6

References:  1, 11, 12, 15, 16, 3, 5, 9, 5.5.3, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000192, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), AC-7(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, PR.IP-1, FMT_MOF_EXT.1, SRG-OS-000069-GPOS-00037, SRG-OS-000480-GPOS-00227, RHEL-08-020104, 5.5.1, SV-251716r858737_rule


# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_retry='3'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^retry")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_retry"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^retry\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^retry\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    cce="CCE-80664-6"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi
	
		if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP '^\s*password\s+'".*"'\s+pam_pwquality.so\s.*\bretry\b' "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks 's/(.*password.*'".*"'.*pam_pwquality.so.*)\sretry=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi
	
		if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP '^\s*password\s+'".*"'\s+pam_pwquality.so\s.*\bretry\b' "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks 's/(.*password.*'".*"'.*pam_pwquality.so.*)\sretry=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-80664-6
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020104
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(4)
  - accounts_password_pam_retry
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
- name: XCCDF Value var_password_pam_retry # promote to variable
  set_fact:
    var_password_pam_retry: !!str 3
  tags:
    - always

- name: Ensure PAM variable retry is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^\s*retry
    line: retry = {{ var_password_pam_retry }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-80664-6
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020104
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(4)
  - accounts_password_pam_retry
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts Permitted
    Per-Session - Check if /etc/pam.d/password-auth file is present
  ansible.builtin.stat:
    path: /etc/pam.d/password-auth
  register: result_pam_file_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-80664-6
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020104
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(4)
  - accounts_password_pam_retry
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts Permitted
    Per-Session - Check the proper remediation for the system
  block:

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Define the PAM file to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/password-auth

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Check if system relies on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Ensure authselect custom profile is used if authselect
      is present
    block:

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Check integrity of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Informative message based on the authselect integrity
        check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Define the current authselect profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Define the new authselect custom profile as a local
        fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Get authselect current features to also enable them
        in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Check if any custom profile with the same name was
        already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Create an authselect custom profile based on the current
        profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Ensure the authselect custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Restore the authselect features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Change the PAM file to be edited according to the
        custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Ensure the "retry" option from "pam_pwquality.so" is
      not present in {{ pam_file_path }}
    ansible.builtin.replace:
      dest: '{{ pam_file_path }}'
      regexp: (.*password.*{{ '.*' | regex_escape() }}.*pam_pwquality.so.*)\bretry\b=?[0-9a-zA-Z]*(.*)
      replace: \1\2
    register: result_pam_option_removal

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - result_pam_option_removal is changed
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_file_present.stat.exists
  tags:
  - CCE-80664-6
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020104
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(4)
  - accounts_password_pam_retry
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts Permitted
    Per-Session - Check if /etc/pam.d/system-auth file is present
  ansible.builtin.stat:
    path: /etc/pam.d/system-auth
  register: result_pam_file_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-80664-6
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020104
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(4)
  - accounts_password_pam_retry
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts Permitted
    Per-Session - Check the proper remediation for the system
  block:

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Define the PAM file to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Check if system relies on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Ensure authselect custom profile is used if authselect
      is present
    block:

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Check integrity of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Informative message based on the authselect integrity
        check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Define the current authselect profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Define the new authselect custom profile as a local
        fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Get authselect current features to also enable them
        in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Check if any custom profile with the same name was
        already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Create an authselect custom profile based on the current
        profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Ensure the authselect custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Restore the authselect features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
        Permitted Per-Session - Change the PAM file to be edited according to the
        custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Ensure the "retry" option from "pam_pwquality.so" is
      not present in {{ pam_file_path }}
    ansible.builtin.replace:
      dest: '{{ pam_file_path }}'
      regexp: (.*password.*{{ '.*' | regex_escape() }}.*pam_pwquality.so.*)\bretry\b=?[0-9a-zA-Z]*(.*)
      replace: \1\2
    register: result_pam_option_removal

  - name: Ensure PAM Enforces Password Requirements - Authentication Retry Prompts
      Permitted Per-Session - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - result_pam_option_removal is changed
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_file_present.stat.exists
  tags:
  - CCE-80664-6
  - CJIS-5.5.3
  - DISA-STIG-RHEL-08-020104
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(4)
  - accounts_password_pam_retry
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
Group   Set Password Hashing Algorithm   Group contains 3 rules
[ref]   The system's default algorithm for storing password hashes in /etc/shadow is SHA-512. This can be configured in several locations.

Rule   Set Password Hashing Algorithm in /etc/login.defs   [ref]

In /etc/login.defs, add or correct the following line to ensure the system will use SHA512 as the hashing algorithm:
ENCRYPT_METHOD SHA512
Rationale:
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kept in plain text.

Using a stronger hashing algorithm makes password cracking attacks more difficult.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_logindefs
Identifiers and References

Identifiers:  CCE-80892-3

References:  BP28(R32), 1, 12, 15, 16, 5, 5.6.2.2, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.13.11, CCI-000196, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0418, 1055, 1402, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(c), CM-6(a), PR.AC-1, PR.AC-6, PR.AC-7, Req-8.2.1, 8.3.2, SRG-OS-000073-GPOS-00041, RHEL-08-010110, 5.5.4, SV-230231r877397_rule


# Remediation is applicable only in certain platforms
if rpm --quiet -q shadow-utils; then

var_password_hashing_algorithm='SHA512'


if grep --silent ^ENCRYPT_METHOD /etc/login.defs ; then
	sed -i "s/^ENCRYPT_METHOD .*/ENCRYPT_METHOD $var_password_hashing_algorithm/g" /etc/login.defs
else
	echo "" >> /etc/login.defs
	echo "ENCRYPT_METHOD $var_password_hashing_algorithm" >> /etc/login.defs
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-80892-3
  - CJIS-5.6.2.2
  - DISA-STIG-RHEL-08-010110
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_logindefs
- name: XCCDF Value var_password_hashing_algorithm # promote to variable
  set_fact:
    var_password_hashing_algorithm: !!str SHA512
  tags:
    - always

- name: Set Password Hashing Algorithm in /etc/login.defs
  lineinfile:
    dest: /etc/login.defs
    regexp: ^#?ENCRYPT_METHOD
    line: ENCRYPT_METHOD {{ var_password_hashing_algorithm }}
    state: present
    create: true
  when: '"shadow-utils" in ansible_facts.packages'
  tags:
  - CCE-80892-3
  - CJIS-5.6.2.2
  - DISA-STIG-RHEL-08-010110
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_logindefs

Rule   Set PAM''s Password Hashing Algorithm - password-auth   [ref]

The PAM system service can be configured to only store encrypted representations of passwords. In /etc/pam.d/password-auth, the password section of the file controls which PAM modules execute during a password change. Set the pam_unix.so module in the password section to include the argument sha512, as shown below:
password    sufficient    pam_unix.so sha512 other arguments...

This will help ensure when local users change their passwords, hashes for the new passwords will be generated using the SHA-512 algorithm. This is the default.
Rationale:
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kepy in plain text.

This setting ensures user and group account administration utilities are configured to store only encrypted representations of passwords. Additionally, the crypt_style configuration option ensures the use of a strong hashing algorithm that makes password cracking attacks more difficult.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_passwordauth
Identifiers and References

Identifiers:  CCE-85945-4

References:  BP28(R32), 1, 12, 15, 16, 5, 5.6.2.2, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.13.11, CCI-000196, CCI-000803, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0418, 1055, 1402, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(c), CM-6(a), PR.AC-1, PR.AC-6, PR.AC-7, Req-8.2.1, SRG-OS-000073-GPOS-00041, SRG-OS-000120-GPOS-00061, RHEL-08-010160, 5.5.4, SV-230237r809276_rule


# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    if ! grep -qP '^\s*password\s+'"sufficient"'\s+pam_unix.so\s*.*' "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_unix.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_unix.so.*)/\1'"sufficient"' \2/' "$PAM_FILE_PATH"
            else
                echo 'password    '"sufficient"'    pam_unix.so' >> "$PAM_FILE_PATH"
            fi
        fi
        # Check the option
        if ! grep -qP '^\s*password\s+'"sufficient"'\s+pam_unix.so\s*.*\ssha512\b' "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks '/\s*password\s+'"sufficient"'\s+pam_unix.so.*/ s/$/ sha512/' "$PAM_FILE_PATH"
        fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-85945-4
  - CJIS-5.6.2.2
  - DISA-STIG-RHEL-08-010160
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - set_password_hashing_algorithm_passwordauth

- name: Set PAM's Password Hashing Algorithm - password-auth - Check if /etc/pam.d/password-auth
    file is present
  ansible.builtin.stat:
    path: /etc/pam.d/password-auth
  register: result_pam_file_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-85945-4
  - CJIS-5.6.2.2
  - DISA-STIG-RHEL-08-010160
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - set_password_hashing_algorithm_passwordauth

- name: Set PAM's Password Hashing Algorithm - password-auth - Check the proper remediation
    for the system
  block:

  - name: Set PAM's Password Hashing Algorithm - password-auth - Define the PAM file
      to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/password-auth

  - name: Set PAM's Password Hashing Algorithm - password-auth - Check if system relies
      on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Set PAM's Password Hashing Algorithm - password-auth - Ensure authselect
      custom profile is used if authselect is present
    block:

    - name: Set PAM's Password Hashing Algorithm - password-auth - Check integrity
        of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Set PAM's Password Hashing Algorithm - password-auth - Informative message
        based on the authselect integrity check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Set PAM's Password Hashing Algorithm - password-auth - Get authselect
        current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Set PAM's Password Hashing Algorithm - password-auth - Define the current
        authselect profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Set PAM's Password Hashing Algorithm - password-auth - Define the new
        authselect custom profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Set PAM's Password Hashing Algorithm - password-auth - Get authselect
        current features to also enable them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Set PAM's Password Hashing Algorithm - password-auth - Check if any custom
        profile with the same name was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Set PAM's Password Hashing Algorithm - password-auth - Create an authselect
        custom profile based on the current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Set PAM's Password Hashing Algorithm - password-auth - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Set PAM's Password Hashing Algorithm - password-auth - Ensure the authselect
        custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Set PAM's Password Hashing Algorithm - password-auth - Restore the authselect
        features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Set PAM's Password Hashing Algorithm - password-auth - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Set PAM's Password Hashing Algorithm - password-auth - Change the PAM
        file to be edited according to the custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Set PAM's Password Hashing Algorithm - password-auth - Check if expected
      PAM module line is present in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ 'sufficient' | regex_escape() }}\s+pam_unix.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: Set PAM's Password Hashing Algorithm - password-auth - Include or update
      the PAM module line in {{ pam_file_path }}
    block:

    - name: Set PAM's Password Hashing Algorithm - password-auth - Check if required
        PAM module line is present in {{ pam_file_path }} with different control
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_unix.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: Set PAM's Password Hashing Algorithm - password-auth - Ensure the correct
        control for the required PAM module line in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_unix.so.*)
        replace: \1sufficient \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: Set PAM's Password Hashing Algorithm - password-auth - Ensure the required
        PAM module line is included in {{ pam_file_path }}
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        line: password    sufficient    pam_unix.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: Set PAM's Password Hashing Algorithm - password-auth - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0

  - name: Set PAM's Password Hashing Algorithm - password-auth - Check if the required
      PAM module option is present in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ 'sufficient' | regex_escape() }}\s+pam_unix.so\s*.*\ssha512\b
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_module_sha512_option_present

  - name: Set PAM's Password Hashing Algorithm - password-auth - Ensure the "sha512"
      PAM option for "pam_unix.so" is included in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+{{ 'sufficient' | regex_escape() }}\s+pam_unix.so.*)
      line: \1 sha512
      state: present
    register: result_pam_sha512_add
    when:
    - result_pam_module_sha512_option_present.found == 0

  - name: Set PAM's Password Hashing Algorithm - password-auth - Ensure authselect
      changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - |-
      (result_pam_sha512_add is defined and result_pam_sha512_add.changed)
       or (result_pam_sha512_edit is defined and result_pam_sha512_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_file_present.stat.exists
  tags:
  - CCE-85945-4
  - CJIS-5.6.2.2
  - DISA-STIG-RHEL-08-010160
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - set_password_hashing_algorithm_passwordauth

Rule   Set PAM''s Password Hashing Algorithm   [ref]

The PAM system service can be configured to only store encrypted representations of passwords. In "/etc/pam.d/system-auth", the password section of the file controls which PAM modules execute during a password change. Set the pam_unix.so module in the password section to include the argument sha512, as shown below:
password    sufficient    pam_unix.so sha512 other arguments...

This will help ensure when local users change their passwords, hashes for the new passwords will be generated using the SHA-512 algorithm. This is the default.
Rationale:
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kepy in plain text.

This setting ensures user and group account administration utilities are configured to store only encrypted representations of passwords. Additionally, the crypt_style configuration option ensures the use of a strong hashing algorithm that makes password cracking attacks more difficult.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_systemauth
Identifiers and References

Identifiers:  CCE-80893-1

References:  BP28(R32), 1, 12, 15, 16, 5, 5.6.2.2, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.13.11, CCI-000196, CCI-000803, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0418, 1055, 1402, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(c), CM-6(a), PR.AC-1, PR.AC-6, PR.AC-7, Req-8.2.1, 8.3.2, SRG-OS-000073-GPOS-00041, SRG-OS-000120-GPOS-00061, RHEL-08-010159, 5.5.4, SV-244524r809331_rule


# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    if ! grep -qP '^\s*password\s+'"sufficient"'\s+pam_unix.so\s*.*' "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_unix.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_unix.so.*)/\1'"sufficient"' \2/' "$PAM_FILE_PATH"
            else
                echo 'password    '"sufficient"'    pam_unix.so' >> "$PAM_FILE_PATH"
            fi
        fi
        # Check the option
        if ! grep -qP '^\s*password\s+'"sufficient"'\s+pam_unix.so\s*.*\ssha512\b' "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks '/\s*password\s+'"sufficient"'\s+pam_unix.so.*/ s/$/ sha512/' "$PAM_FILE_PATH"
        fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-80893-1
  - CJIS-5.6.2.2
  - DISA-STIG-RHEL-08-010159
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - set_password_hashing_algorithm_systemauth

- name: Set PAM's Password Hashing Algorithm - Check if /etc/pam.d/system-auth file
    is present
  ansible.builtin.stat:
    path: /etc/pam.d/system-auth
  register: result_pam_file_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-80893-1
  - CJIS-5.6.2.2
  - DISA-STIG-RHEL-08-010159
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - set_password_hashing_algorithm_systemauth

- name: Set PAM's Password Hashing Algorithm - Check the proper remediation for the
    system
  block:

  - name: Set PAM's Password Hashing Algorithm - Define the PAM file to be edited
      as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: Set PAM's Password Hashing Algorithm - Check if system relies on authselect
      tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Set PAM's Password Hashing Algorithm - Ensure authselect custom profile
      is used if authselect is present
    block:

    - name: Set PAM's Password Hashing Algorithm - Check integrity of authselect current
        profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Set PAM's Password Hashing Algorithm - Informative message based on the
        authselect integrity check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Set PAM's Password Hashing Algorithm - Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Set PAM's Password Hashing Algorithm - Define the current authselect profile
        as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Set PAM's Password Hashing Algorithm - Define the new authselect custom
        profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Set PAM's Password Hashing Algorithm - Get authselect current features
        to also enable them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Set PAM's Password Hashing Algorithm - Check if any custom profile with
        the same name was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Set PAM's Password Hashing Algorithm - Create an authselect custom profile
        based on the current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Set PAM's Password Hashing Algorithm - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Set PAM's Password Hashing Algorithm - Ensure the authselect custom profile
        is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Set PAM's Password Hashing Algorithm - Restore the authselect features
        in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Set PAM's Password Hashing Algorithm - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Set PAM's Password Hashing Algorithm - Change the PAM file to be edited
        according to the custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Set PAM's Password Hashing Algorithm - Check if expected PAM module line
      is present in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ 'sufficient' | regex_escape() }}\s+pam_unix.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: Set PAM's Password Hashing Algorithm - Include or update the PAM module
      line in {{ pam_file_path }}
    block:

    - name: Set PAM's Password Hashing Algorithm - Check if required PAM module line
        is present in {{ pam_file_path }} with different control
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_unix.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: Set PAM's Password Hashing Algorithm - Ensure the correct control for
        the required PAM module line in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_unix.so.*)
        replace: \1sufficient \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: Set PAM's Password Hashing Algorithm - Ensure the required PAM module
        line is included in {{ pam_file_path }}
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        line: password    sufficient    pam_unix.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: Set PAM's Password Hashing Algorithm - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0

  - name: Set PAM's Password Hashing Algorithm - Check if the required PAM module
      option is present in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ 'sufficient' | regex_escape() }}\s+pam_unix.so\s*.*\ssha512\b
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_module_sha512_option_present

  - name: Set PAM's Password Hashing Algorithm - Ensure the "sha512" PAM option for
      "pam_unix.so" is included in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+{{ 'sufficient' | regex_escape() }}\s+pam_unix.so.*)
      line: \1 sha512
      state: present
    register: result_pam_sha512_add
    when:
    - result_pam_module_sha512_option_present.found == 0

  - name: Set PAM's Password Hashing Algorithm - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - |-
      (result_pam_sha512_add is defined and result_pam_sha512_add.changed)
       or (result_pam_sha512_edit is defined and result_pam_sha512_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_file_present.stat.exists
  tags:
  - CCE-80893-1
  - CJIS-5.6.2.2
  - DISA-STIG-RHEL-08-010159
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - set_password_hashing_algorithm_systemauth
Group   Protect Physical Console Access   Group contains 2 rules
[ref]   It is impossible to fully protect a system from an attacker with physical access, so securing the space in which the system is located should be considered a necessary step. However, there are some steps which, if taken, make it more difficult for an attacker to quickly or undetectably modify a system from its console.

Rule   Require Authentication for Emergency Systemd Target   [ref]

Emergency mode is intended as a system recovery method, providing a single user root access to the system during a failed boot sequence.

By default, Emergency mode is protected by requiring a password and is set in /usr/lib/systemd/system/emergency.service.
Rationale:
This prevents attackers with physical access from trivially bypassing security on the machine and gaining root access. Such accesses are further prevented by configuring the bootloader password.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_require_emergency_target_auth
Identifiers and References

Identifiers:  CCE-82186-8

References:  1, 11, 12, 14, 15, 16, 18, 3, 5, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10, 3.1.1, 3.4.5, CCI-000213, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, IA-2, AC-3, CM-6(a), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3, FIA_UAU.1, SRG-OS-000080-GPOS-00048, RHEL-08-010152, 1.4.3, SV-244523r743818_rule


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

service_file="/usr/lib/systemd/system/emergency.service"


sulogin="/usr/lib/systemd/systemd-sulogin-shell emergency"


if grep "^ExecStart=.*" "$service_file" ; then
    sed -i "s%^ExecStart=.*%ExecStart=-$sulogin%" "$service_file"
else
    echo "ExecStart=-$sulogin" >> "$service_file"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Require emergency mode password
  lineinfile:
    create: true
    dest: /usr/lib/systemd/system/emergency.service
    regexp: ^#?ExecStart=
    line: ExecStart=-/usr/lib/systemd/systemd-sulogin-shell emergency
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-82186-8
  - DISA-STIG-RHEL-08-010152
  - NIST-800-171-3.1.1
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - require_emergency_target_auth
  - restrict_strategy

Rule   Require Authentication for Single User Mode   [ref]

Single-user mode is intended as a system recovery method, providing a single user root access to the system by providing a boot option at startup.

By default, single-user mode is protected by requiring a password and is set in /usr/lib/systemd/system/rescue.service.
Rationale:
This prevents attackers with physical access from trivially bypassing security on the machine and gaining root access. Such accesses are further prevented by configuring the bootloader password.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_require_singleuser_auth
Identifiers and References

Identifiers:  CCE-80855-0

References:  1, 11, 12, 14, 15, 16, 18, 3, 5, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10, 3.1.1, 3.4.5, CCI-000213, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, IA-2, AC-3, CM-6(a), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3, FIA_UAU.1, SRG-OS-000080-GPOS-00048, RHEL-08-010151, 1.4.3, SV-230236r743928_rule


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

service_file="/usr/lib/systemd/system/rescue.service"

sulogin="/usr/lib/systemd/systemd-sulogin-shell rescue"

if grep "^ExecStart=.*" "$service_file" ; then
    sed -i "s%^ExecStart=.*%ExecStart=-$sulogin%" "$service_file"
else
    echo "ExecStart=-$sulogin" >> "$service_file"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Require single user mode password
  lineinfile:
    create: true
    dest: /usr/lib/systemd/system/rescue.service
    regexp: ^#?ExecStart=
    line: ExecStart=-/usr/lib/systemd/systemd-sulogin-shell rescue
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-80855-0
  - DISA-STIG-RHEL-08-010151
  - NIST-800-171-3.1.1
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - require_singleuser_auth
  - restrict_strategy
Group   Protect Accounts by Restricting Password-Based Login   Group contains 4 groups and 24 rules
[ref]   Conventionally, Unix shell accounts are accessed by providing a username and password to a login program, which tests these values for correctness using the /etc/passwd and /etc/shadow files. Password-based login is vulnerable to guessing of weak passwords, and to sniffing and man-in-the-middle attacks against passwords entered over a network or at an insecure console. Therefore, mechanisms for accessing accounts by entering usernames and passwords should be restricted to those which are operationally necessary.
Group   Set Account Expiration Parameters   Group contains 2 rules
Group   Set Password Expiration Parameters   Group contains 7 rules
[ref]   The file /etc/login.defs controls several password-related settings. Programs such as passwd, su, and login consult /etc/login.defs to determine behavior with regard to password aging, expiration warnings, and length. See the man page login.defs(5) for more information.

Users should be forced to change their passwords, in order to decrease the utility of compromised passwords. However, the need to change passwords often should be balanced against the risk that users will reuse or write down passwords if forced to change them too often. Forcing password changes every 90-360 days, depending on the environment, is recommended. Set the appropriate value as PASS_MAX_DAYS and apply it to existing accounts with the -M flag.

The PASS_MIN_DAYS (-m) setting prevents password changes for 7 days after the first change, to discourage password cycling. If you use this setting, train users to contact an administrator for an emergency password change in case a new password becomes compromised. The PASS_WARN_AGE (-W) setting gives users 7 days of warnings at login time that their passwords are about to expire.

For example, for each existing human user USER, expiration parameters could be adjusted to a 180 day maximum password age, 7 day minimum password age, and 7 day warning period with the following command:
$ sudo chage -M 180 -m 7 -W 7 USER

Rule   Set Existing Passwords Maximum Age   [ref]

Configure non-compliant accounts to enforce a 365-day maximum password lifetime restriction by running the following command:
$ sudo chage -M 365 USER
Rationale:
Any password, no matter how complex, can eventually be cracked. Therefore, passwords need to be changed periodically. If the operating system does not limit the lifetime of passwords and force users to change their passwords, there is the risk that the operating system passwords could be compromised.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_set_max_life_existing
Identifiers and References

Identifiers:  CCE-82473-0

References:  CCI-000199, IA-5(f), IA-5(1)(d), CM-6(a), SRG-OS-000076-GPOS-00044, RHEL-08-020210, 5.6.1.1, SV-230367r627750_rule


Complexity:low
Disruption:low
Reboot:false
Strategy:restrict

var_accounts_maximum_age_login_defs='365'


while IFS= read -r i; do
    
    chage -M $var_accounts_maximum_age_login_defs $i

done <   <(awk -v var="$var_accounts_maximum_age_login_defs" -F: '(/^[^:]+:[^!*]/ && ($5 > var || $5 == "")) {print $1}' /etc/shadow)

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value var_accounts_maximum_age_login_defs # promote to variable
  set_fact:
    var_accounts_maximum_age_login_defs: !!str 365
  tags:
    - always

- name: Collect users with not correct maximum time period between password changes
  ansible.builtin.command:
    cmd: awk -F':' '(/^[^:]+:[^!*]/ && ($5 > {{ var_accounts_maximum_age_login_defs
      }} || $5 == "")) {print $1}' /etc/shadow
  register: user_names
  tags:
  - CCE-82473-0
  - DISA-STIG-RHEL-08-020210
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - accounts_password_set_max_life_existing
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Change the maximum time period between password changes
  ansible.builtin.user:
    user: '{{ item }}'
    password_expire_max: '{{ var_accounts_maximum_age_login_defs }}'
  with_items: '{{ user_names.stdout_lines }}'
  when: user_names.stdout_lines | length > 0
  tags:
  - CCE-82473-0
  - DISA-STIG-RHEL-08-020210
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - accounts_password_set_max_life_existing
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Rule   Set Existing Passwords Minimum Age   [ref]

Configure non-compliant accounts to enforce a 24 hours/1 day minimum password lifetime by running the following command:
$ sudo chage -m 1 USER
Rationale:
Enforcing a minimum password lifetime helps to prevent repeated password changes to defeat the password reuse or history enforcement requirement. If users are allowed to immediately and continually change their password, the password could be repeatedly changed in a short period of time to defeat the organization's policy regarding password reuse.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_set_min_life_existing
Identifiers and References

Identifiers:  CCE-82472-2

References:  CCI-000198, IA-5(f), IA-5(1)(d), CM-6(a), SRG-OS-000075-GPOS-00043, RHEL-08-020180, 5.6.1.2, SV-230364r627750_rule


Complexity:low
Disruption:low
Reboot:false
Strategy:restrict

var_accounts_minimum_age_login_defs='7'


while IFS= read -r i; do
    
    chage -m $var_accounts_minimum_age_login_defs $i

done <   <(awk -v var="$var_accounts_minimum_age_login_defs" -F: '(/^[^:]+:[^!*]/ && ($4 < var || $4 == "")) {print $1}' /etc/shadow)

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value var_accounts_minimum_age_login_defs # promote to variable
  set_fact:
    var_accounts_minimum_age_login_defs: !!str 7
  tags:
    - always

- name: Collect users with not correct minimum time period between password changes
  command: |
    awk -F':' '(/^[^:]+:[^!*]/ && ($4 < {{ var_accounts_minimum_age_login_defs }} || $4 == "")) {print $1}' /etc/shadow
  register: user_names
  tags:
  - CCE-82472-2
  - DISA-STIG-RHEL-08-020180
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - accounts_password_set_min_life_existing
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Change the minimum time period between password changes
  command: |
    chage -m {{ var_accounts_minimum_age_login_defs }} {{ item }}
  with_items: '{{ user_names.stdout_lines }}'
  when: user_names.stdout_lines | length > 0
  tags:
  - CCE-82472-2
  - DISA-STIG-RHEL-08-020180
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - accounts_password_set_min_life_existing
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Rule   Set Existing Passwords Warning Age   [ref]

To configure how many days prior to password expiration that a warning will be issued to users, run the command:
$ sudo chage --warndays 7 USER
The DoD requirement is 7, and CIS recommendation is no less than 7 days. This profile requirement is 7.
Rationale:
Providing an advance warning that a password will be expiring gives users time to think of a secure password. Users caught unaware may choose a simple password or write it down where it may be discovered.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_set_warn_age_existing
Identifiers and References

Identifiers:  CCE-86914-9

References:  CCI-000198, IA-5(f), IA-5(1)(d), CM-6(a), 5.6.1.3


Complexity:low
Disruption:low
Reboot:false
Strategy:configure

var_accounts_password_warn_age_login_defs='7'


while IFS= read -r i; do
    chage --warndays $var_accounts_password_warn_age_login_defs $i
done <   <(awk -v var="$var_accounts_password_warn_age_login_defs" -F: '(($6 < var || $6 == "") && $2 ~ /^\$/) {print $1}' /etc/shadow)

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: XCCDF Value var_accounts_password_warn_age_login_defs # promote to variable
  set_fact:
    var_accounts_password_warn_age_login_defs: !!str 7
  tags:
    - always

- name: Set Existing Passwords Warning Age - Collect Users With Incorrect Number of
    Days of Warning Before Password Expires
  ansible.builtin.command:
    cmd: awk -F':' '(($6 < {{ var_accounts_password_warn_age_login_defs }} || $6 ==
      "") && $2 ~ /^\$/) {print $1}' /etc/shadow
  register: result_pass_warn_age_user_names
  changed_when: false
  tags:
  - CCE-86914-9
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - accounts_password_set_warn_age_existing
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Existing Passwords Warning Age - Ensure the Number of Days of Warning
    Before Password Expires
  ansible.builtin.command:
    cmd: chage --warndays {{ var_accounts_password_warn_age_login_defs }} {{ item
      }}
  with_items: '{{ result_pass_warn_age_user_names.stdout_lines }}'
  when: result_pass_warn_age_user_names.stdout_lines | length > 0
  tags:
  - CCE-86914-9
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - accounts_password_set_warn_age_existing
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Rule   Set existing passwords a period of inactivity before they been locked   [ref]

Configure user accounts that have been inactive for over a given period of time to be automatically disabled by running the following command:
$ sudo chage --inactive 30USER
Rationale:
Inactive accounts pose a threat to system security since the users are not logging in to notice failed login attempts or other anomalies.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_set_post_pw_existing
Identifiers and References

Identifiers:  CCE-86758-0

References:  DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.5.6, CCI-000017, CCI-000795, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2, A.12.4.1, A.12.4.3, A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-004-6 R2.2.2, CIP-004-6 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, IA-4(e), AC-2(3), CM-6(a), DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, Req-8.1.4, SRG-OS-000118-GPOS-00060, 5.6.1.4


Complexity:low
Disruption:low
Reboot:false
Strategy:restrict

var_account_disable_post_pw_expiration='30'


while IFS= read -r i; do
    chage --inactive $var_account_disable_post_pw_expiration $i
done <   <(awk -v var="$var_account_disable_post_pw_expiration" -F: '(($7 > var || $7 == "") && $2 ~ /^\$/) {print $1}' /etc/shadow)

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value var_account_disable_post_pw_expiration # promote to variable
  set_fact:
    var_account_disable_post_pw_expiration: !!str 30
  tags:
    - always

- name: Collect users with not correct INACTIVE parameter set
  ansible.builtin.command:
    cmd: awk -F':' '(($7 > {{ var_account_disable_post_pw_expiration }} || $7 == "")
      && $2 ~ /^\$/) {print $1}' /etc/shadow
  register: user_names
  changed_when: false
  tags:
  - CCE-86758-0
  - NIST-800-171-3.5.6
  - NIST-800-53-AC-2(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-4(e)
  - PCI-DSS-Req-8.1.4
  - accounts_set_post_pw_existing
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Change the period of inactivity
  ansible.builtin.command:
    cmd: chage --inactive {{ var_account_disable_post_pw_expiration }} {{ item }}
  with_items: '{{ user_names.stdout_lines }}'
  when: user_names.stdout_lines | length > 0
  tags:
  - CCE-86758-0
  - NIST-800-171-3.5.6
  - NIST-800-53-AC-2(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-4(e)
  - PCI-DSS-Req-8.1.4
  - accounts_set_post_pw_existing
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
Group   Verify Proper Storage and Existence of Password Hashes   Group contains 6 rules
[ref]   By default, password hashes for local accounts are stored in the second field (colon-separated) in /etc/shadow. This file should be readable only by processes running with root credentials, preventing users from casually accessing others' password hashes and attempting to crack them. However, it remains possible to misconfigure the system and store password hashes in world-readable files such as /etc/passwd, or to even store passwords themselves in plaintext on the system. Using system-provided tools for password change/creation should allow administrators to avoid such misconfiguration.

Rule   Ensure all users last password change date is in the past   [ref]

All users should have a password change date in the past.
Warning:  Automatic remediation is not available, in order to avoid any system disruption.
Rationale:
If a user recorded password change date is in the future then they could bypass any set password expiration.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_last_change_is_in_past
Identifiers and References

Identifiers:  CCE-86525-3

References:  5.6.1.5

Rule   All GIDs referenced in /etc/passwd must be defined in /etc/group   [ref]

Add a group to the system for each GID referenced without a corresponding group.
Rationale:
If a user is assigned the Group Identifier (GID) of a group not existing on the system, and a group with the Group Identifier (GID) is subsequently created, the user may have unintended rights to any files associated with the group.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_gid_passwd_group_same
Identifiers and References

Identifiers:  CCE-80822-0

References:  1, 12, 15, 16, 5, 5.5.2, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000764, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, IA-2, CM-6(a), PR.AC-1, PR.AC-6, PR.AC-7, Req-8.5.a, 8.2.2, SRG-OS-000104-GPOS-00051, 6.2.2

Rule   Prevent Login to Accounts With Empty Password   [ref]

If an account is configured for password authentication but does not have an assigned password, it may be possible to log into the account without authentication. Remove any instances of the nullok in /etc/pam.d/system-auth and /etc/pam.d/password-auth to prevent logins with empty passwords.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. Note that this rule is not applicable for systems running within a container. Having user with empty password within a container is not considered a risk, because it should not be possible to directly login into a container anyway.
Rationale:
If an account has an empty password, anyone could log in and run commands with the privileges of that account. Accounts with empty passwords should never be used in operational environments.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_no_empty_passwords
Identifiers and References

Identifiers:  CCE-80841-0

References:  1, 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2, APO01.06, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.10, 3.1.1, 3.1.5, CCI-000366, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, IA-5(1)(a), IA-5(c), CM-6(a), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5, FIA_UAU.1, Req-8.2.3, 8.3.6, 8.3.9, SRG-OS-000480-GPOS-00227, RHEL-08-020331, RHEL-08-020332, 5.4.1, SV-244540r743869_rule, SV-244541r743872_rule


Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature without-nullok

authselect apply-changes -b
else
    
if grep -qP '^\s*auth\s+'"sufficient"'\s+pam_unix.so\s.*\bnullok\b' "/etc/pam.d/system-auth"; then
    sed -i -E --follow-symlinks 's/(.*auth.*'"sufficient"'.*pam_unix.so.*)\snullok=?[[:alnum:]]*(.*)/\1\2/g' "/etc/pam.d/system-auth"
fi
    
if grep -qP '^\s*password\s+'"sufficient"'\s+pam_unix.so\s.*\bnullok\b' "/etc/pam.d/system-auth"; then
    sed -i -E --follow-symlinks 's/(.*password.*'"sufficient"'.*pam_unix.so.*)\snullok=?[[:alnum:]]*(.*)/\1\2/g' "/etc/pam.d/system-auth"
fi
    
if grep -qP '^\s*auth\s+'"sufficient"'\s+pam_unix.so\s.*\bnullok\b' "/etc/pam.d/password-auth"; then
    sed -i -E --follow-symlinks 's/(.*auth.*'"sufficient"'.*pam_unix.so.*)\snullok=?[[:alnum:]]*(.*)/\1\2/g' "/etc/pam.d/password-auth"
fi
    
if grep -qP '^\s*password\s+'"sufficient"'\s+pam_unix.so\s.*\bnullok\b' "/etc/pam.d/password-auth"; then
    sed -i -E --follow-symlinks 's/(.*password.*'"sufficient"'.*pam_unix.so.*)\snullok=?[[:alnum:]]*(.*)/\1\2/g' "/etc/pam.d/password-auth"
fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%23%20Generated%20by%20authselect%20on%20Sat%20Oct%2027%2014%3A59%3A36%202018%0A%23%20Do%20not%20modify%20this%20file%20manually.%0A%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_env.so%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_faildelay.so%20delay%3D2000000%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_fprintd.so%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20try_first_pass%0Aauth%20%20%20%20%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet_success%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20forward_pass%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3C%201000%20quiet%0Aaccount%20%20%20%20%20%5Bdefault%3Dbad%20success%3Dok%20user_unknown%3Dignore%5D%20pam_sss.so%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_permit.so%0A%0Apassword%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_pwquality.so%20try_first_pass%20local_users_only%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20sha512%20shadow%20try_first_pass%20use_authtok%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20use_authtok%0Apassword%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_keyinit.so%20revoke%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_limits.so%0A-session%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_systemd.so%0Asession%20%20%20%20%20%5Bsuccess%3D1%20default%3Dignore%5D%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20service%20in%20crond%20quiet%20use_uid%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%0A
        mode: 0644
        path: /etc/pam.d/password-auth
        overwrite: true
      - contents:
          source: data:,%23%20Generated%20by%20authselect%20on%20Sat%20Oct%2027%2014%3A59%3A36%202018%0A%23%20Do%20not%20modify%20this%20file%20manually.%0A%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_env.so%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_faildelay.so%20delay%3D2000000%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_fprintd.so%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20try_first_pass%0Aauth%20%20%20%20%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet_success%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20forward_pass%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3C%201000%20quiet%0Aaccount%20%20%20%20%20%5Bdefault%3Dbad%20success%3Dok%20user_unknown%3Dignore%5D%20pam_sss.so%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_permit.so%0A%0Apassword%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_pwquality.so%20try_first_pass%20local_users_only%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20sha512%20shadow%20try_first_pass%20use_authtok%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20use_authtok%0Apassword%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_keyinit.so%20revoke%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_limits.so%0A-session%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_systemd.so%0Asession%20%20%20%20%20%5Bsuccess%3D1%20default%3Dignore%5D%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20service%20in%20crond%20quiet%20use_uid%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%0A
        mode: 0644
        path: /etc/pam.d/system-auth
        overwrite: true

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Prevent Login to Accounts With Empty Password - Check if system relies on
    authselect
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-80841-0
  - CJIS-5.5.2
  - DISA-STIG-RHEL-08-020331
  - DISA-STIG-RHEL-08-020332
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - configure_strategy
  - high_severity
  - low_complexity
  - medium_disruption
  - no_empty_passwords
  - no_reboot_needed

- name: Prevent Login to Accounts With Empty Password - Remediate using authselect
  block:

  - name: Prevent Login to Accounts With Empty Password - Check integrity of authselect
      current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Prevent Login to Accounts With Empty Password - Informative message based
      on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Prevent Login to Accounts With Empty Password - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Prevent Login to Accounts With Empty Password - Ensure "without-nullok"
      feature is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature without-nullok
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("without-nullok")

  - name: Prevent Login to Accounts With Empty Password - Ensure authselect changes
      are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - result_authselect_present.stat.exists
  tags:
  - CCE-80841-0
  - CJIS-5.5.2
  - DISA-STIG-RHEL-08-020331
  - DISA-STIG-RHEL-08-020332
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - configure_strategy
  - high_severity
  - low_complexity
  - medium_disruption
  - no_empty_passwords
  - no_reboot_needed

- name: Prevent Login to Accounts With Empty Password - Remediate directly editing
    PAM files
  ansible.builtin.replace:
    dest: '{{ item }}'
    regexp: nullok
  loop:
  - /etc/pam.d/system-auth
  - /etc/pam.d/password-auth
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - not result_authselect_present.stat.exists
  tags:
  - CCE-80841-0
  - CJIS-5.5.2
  - DISA-STIG-RHEL-08-020331
  - DISA-STIG-RHEL-08-020332
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - configure_strategy
  - high_severity
  - low_complexity
  - medium_disruption
  - no_empty_passwords
  - no_reboot_needed

Rule   Ensure There Are No Accounts With Blank or Null Passwords   [ref]

Check the "/etc/shadow" file for blank passwords with the following command:
$ sudo awk -F: '!$2 {print $1}' /etc/shadow
If the command returns any results, this is a finding. Configure all accounts on the system to have a password or lock the account with the following commands: Perform a password reset:
$ sudo passwd [username]
Lock an account:
$ sudo passwd -l [username]
Warning:  Note that this rule is not applicable for systems running within a container. Having user with empty password within a container is not considered a risk, because it should not be possible to directly login into a container anyway.
Rationale:
If an account has an empty password, anyone could log in and run commands with the privileges of that account. Accounts with empty passwords should never be used in operational environments.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_no_empty_passwords_etc_shadow
Identifiers and References

Identifiers:  CCE-85953-8

References:  CCI-000366, CM-6(b), CM-6.1(iv), SRG-OS-000480-GPOS-00227, RHEL-08-010121, 6.2.1, SV-251706r809342_rule


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

readarray -t users_with_empty_pass < <(sudo awk -F: '!$2 {print $1}' /etc/shadow)

for user_with_empty_pass in "${users_with_empty_pass[@]}"
do
    passwd -l $user_with_empty_pass
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Collect users with no password
  command: |
    awk -F: '!$2 {print $1}' /etc/shadow
  register: users_nopasswd
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85953-8
  - DISA-STIG-RHEL-08-010121
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - high_severity
  - low_complexity
  - low_disruption
  - no_empty_passwords_etc_shadow
  - no_reboot_needed
  - restrict_strategy

- name: Lock users with no password
  command: |
    passwd -l {{ item }}
  with_items: '{{ users_nopasswd.stdout_lines }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - users_nopasswd.stdout_lines | length > 0
  tags:
  - CCE-85953-8
  - DISA-STIG-RHEL-08-010121
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - high_severity
  - low_complexity
  - low_disruption
  - no_empty_passwords_etc_shadow
  - no_reboot_needed
  - restrict_strategy

Rule   Verify No .forward Files Exist   [ref]

The .forward file specifies an email address to forward the user's mail to.
Rationale:
Use of the .forward file poses a security risk in that sensitive data may be inadvertently transferred outside the organization. The .forward file also poses a risk as it can be used to execute commands that may perform unintended actions.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_no_forward_files
Identifiers and References

Identifiers:  CCE-86755-6

References:  6.2.14

Rule   Verify No netrc Files Exist   [ref]

The .netrc files contain login information used to auto-login into FTP servers and reside in the user's home directory. These files may contain unencrypted passwords to remote FTP servers making them susceptible to access by unauthorized users and should not be used. Any .netrc files should be removed.
Rationale:
Unencrypted passwords for remote FTP servers may be stored in .netrc files.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_no_netrc_files
Identifiers and References

Identifiers:  CCE-83444-0

References:  1, 11, 12, 14, 15, 16, 18, 3, 5, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10, CCI-000196, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-003-8 R1.3, CIP-003-8 R3, CIP-003-8 R3.1, CIP-003-8 R3.2, CIP-003-8 R3.3, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, IA-5(h), IA-5(1)(c), CM-6(a), IA-5(7), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3, 6.2.13, 6.2.15

Group   Restrict Root Logins   Group contains 6 rules
[ref]   Direct root logins should be allowed only for emergency use. In normal situations, the administrator should access the system via a unique unprivileged account, and then use su or sudo to execute privileged commands. Discouraging administrators from accessing the root account directly ensures an audit trail in organizations with multiple administrators. Locking down the channels through which root can connect directly also reduces opportunities for password-guessing against the root account. The login program uses the file /etc/securetty to determine which interfaces should allow root logins. The virtual devices /dev/console and /dev/tty* represent the system consoles (accessible via the Ctrl-Alt-F1 through Ctrl-Alt-F6 keyboard sequences on a default installation). The default securetty file also contains /dev/vc/*. These are likely to be deprecated in most environments, but may be retained for compatibility. Root should also be prohibited from connecting via network protocols. Other sections of this document include guidance describing how to prevent root from logging in via SSH.

Rule   Verify Only Root Has UID 0   [ref]

If any account other than root has a UID of 0, this misconfiguration should be investigated and the accounts other than root should be removed or have their UID changed.
If the account is associated with system commands or applications the UID should be changed to one greater than "0" but less than "1000." Otherwise assign a UID greater than "1000" that has not already been assigned.
Rationale:
An account has root authority if it has a UID of 0. Multiple accounts with a UID of 0 afford more opportunity for potential intruders to guess a password for a privileged account. Proper configuration of sudo is recommended to afford multiple system administrators access to root privileges in an accountable manner.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_accounts_no_uid_except_zero
Identifiers and References

Identifiers:  CCE-80649-7

References:  1, 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.10, 3.1.1, 3.1.5, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, IA-2, AC-6(5), IA-4(b), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5, Req-8.5, 8.2.2, 8.2.3, SRG-OS-000480-GPOS-00227, RHEL-08-040200, 6.2.8, SV-230534r627750_rule


awk -F: '$3 == 0 && $1 != "root" { print $1 }' /etc/passwd | xargs --no-run-if-empty --max-lines=1 passwd -l

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Get all /etc/passwd file entries
  getent:
    database: passwd
    split: ':'
  tags:
  - CCE-80649-7
  - DISA-STIG-RHEL-08-040200
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-AC-6(5)
  - NIST-800-53-IA-2
  - NIST-800-53-IA-4(b)
  - PCI-DSS-Req-8.5
  - PCI-DSSv4-8.2.2
  - PCI-DSSv4-8.2.3
  - accounts_no_uid_except_zero
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - restrict_strategy

- name: Lock the password of the user accounts other than root with uid 0
  command: passwd -l {{ item.key }}
  loop: '{{ getent_passwd | dict2items | rejectattr(''key'', ''search'', ''root'')
    | list }}'
  when: item.value.1  == '0'
  tags:
  - CCE-80649-7
  - DISA-STIG-RHEL-08-040200
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-AC-6(5)
  - NIST-800-53-IA-2
  - NIST-800-53-IA-4(b)
  - PCI-DSS-Req-8.5
  - PCI-DSSv4-8.2.2
  - PCI-DSSv4-8.2.3
  - accounts_no_uid_except_zero
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - restrict_strategy

Rule   Verify Root Has A Primary GID 0   [ref]

The root user should have a primary group of 0.
Rationale:
To help ensure that root-owned files are not inadvertently exposed to other users.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_accounts_root_gid_zero
Identifiers and References

Identifiers:  CCE-86297-9

References:  Req-8.1.1, 8.2.1, 5.6.4

Rule   Ensure the Group Used by pam_wheel Module Exists on System and is Empty   [ref]

Ensure that the group sugroup referenced by the pam_wheel group parameter exists and has no members. This ensures that no user can run commands with altered privileges through the su command.
Rationale:
The su program allows to run commands with a substitute user and group ID. It is commonly used to run commands as the root user. Limiting access to such command is considered a good security practice.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_ensure_pam_wheel_group_empty
Identifiers and References

Identifiers:  CCE-86071-8

References:  5.3.7


# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_pam_wheel_group_for_su='sugroup'


if ! grep -q "^${var_pam_wheel_group_for_su}:[^:]*:[^:]*:[^:]*" /etc/group; then
    groupadd ${var_pam_wheel_group_for_su}
fi

# group must be empty
grp_memb=$(groupmems -g ${var_pam_wheel_group_for_su} -l)
if [ -n "${grp_memb}" ]; then
    for memb in ${grp_memb}; do
        deluser ${memb} ${var_pam_wheel_group_for_su}
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-86071-8
  - ensure_pam_wheel_group_empty
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_pam_wheel_group_for_su # promote to variable
  set_fact:
    var_pam_wheel_group_for_su: !!str sugroup
  tags:
    - always

- name: Ensure the Group Used by pam_wheel Module Exists on System and is Empty -
    Ensure group {{ var_pam_wheel_group_for_su }} is removed
  group:
    name: '{{ var_pam_wheel_group_for_su }}'
    state: absent
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-86071-8
  - ensure_pam_wheel_group_empty
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Group Used by pam_wheel Module Exists on System and is Empty -
    Ensure group {{ var_pam_wheel_group_for_su }} exist
  group:
    name: '{{ var_pam_wheel_group_for_su }}'
    state: present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-86071-8
  - ensure_pam_wheel_group_empty
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Rule   Ensure that System Accounts Are Locked   [ref]

Some accounts are not associated with a human user of the system, and exist to perform some administrative functions. An attacker should not be able to log into these accounts.

System accounts are those user accounts with a user ID less than 1000. If any system account other than root, halt, sync, shutdown and nfsnobody has an unlocked password, disable it with the command:
$ sudo usermod -L account
Rationale:
Disabling authentication for default system accounts makes it more difficult for attackers to make use of them to compromise a system.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_no_password_auth_for_systemaccounts
Identifiers and References

Identifiers:  CCE-86112-0

References:  CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-6, CM-6(a), 5.6.2


Complexity:low
Disruption:medium
Reboot:false
Strategy:restrict

readarray -t systemaccounts < <(awk -F: \
  '($3 < 1000 && $3 != root && $3 != halt && $3 != sync && $3 != shutdown \
  && $3 != nfsnobody) { print $1 }' /etc/passwd)

for systemaccount in "${systemaccounts[@]}"; do
    usermod -L "$systemaccount"
done

Complexity:low
Disruption:medium
Reboot:false
Strategy:restrict
- name: Ensure that System Accounts Are Locked - Get All Local Users From /etc/passwd
  ansible.builtin.getent:
    database: passwd
    split: ':'
  tags:
  - CCE-86112-0
  - NIST-800-53-AC-6
  - NIST-800-53-CM-6(a)
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_password_auth_for_systemaccounts
  - no_reboot_needed
  - restrict_strategy

- name: Ensure that System Accounts Are Locked - Create local_users Variable From
    getent_passwd Facts
  ansible.builtin.set_fact:
    local_users: '{{ ansible_facts.getent_passwd | dict2items }}'
  tags:
  - CCE-86112-0
  - NIST-800-53-AC-6
  - NIST-800-53-CM-6(a)
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_password_auth_for_systemaccounts
  - no_reboot_needed
  - restrict_strategy

- name: Ensure that System Accounts Are Locked - Lock System Accounts
  ansible.builtin.user:
    name: '{{ item.key }}'
    password_lock: true
  loop: '{{ local_users }}'
  when:
  - item.value[1]|int < 1000
  - item.key not in ['root', 'halt', 'sync', 'shutdown', 'nfsnobody']
  tags:
  - CCE-86112-0
  - NIST-800-53-AC-6
  - NIST-800-53-CM-6(a)
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_password_auth_for_systemaccounts
  - no_reboot_needed
  - restrict_strategy

Rule   Ensure that System Accounts Do Not Run a Shell Upon Login   [ref]

Some accounts are not associated with a human user of the system, and exist to perform some administrative functions. Should an attacker be able to log into these accounts, they should not be granted access to a shell.

The login shell for each local account is stored in the last field of each line in /etc/passwd. System accounts are those user accounts with a user ID less than 1000. The user ID is stored in the third field. If any system account other than root has a login shell, disable it with the command:
$ sudo usermod -s /sbin/nologin account
Warning:  Do not perform the steps in this section on the root account. Doing so might cause the system to become inaccessible.
Rationale:
Ensuring shells are not given to system accounts upon login makes it more difficult for attackers to make use of system accounts.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_no_shelllogin_for_systemaccounts
Identifiers and References

Identifiers:  CCE-80843-6

References:  1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8, DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS06.03, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2, 1491, A.12.4.1, A.12.4.3, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, AC-6, CM-6(a), CM-6(b), CM-6.1(iv), DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, 8.6.1, SRG-OS-000480-GPOS-00227, 5.6.2


Complexity:low
Disruption:medium
Reboot:false
Strategy:restrict

readarray -t systemaccounts < <(awk -F: '($3 < 1000 && $3 != root \
  && $7 != "\/sbin\/shutdown" && $7 != "\/sbin\/halt" && $7 != "\/bin\/sync") \
  { print $1 }' /etc/passwd)

for systemaccount in "${systemaccounts[@]}"; do
    usermod -s /sbin/nologin "$systemaccount"
done

Complexity:low
Disruption:medium
Reboot:false
Strategy:restrict
- name: Ensure that System Accounts Do Not Run a Shell Upon Login - Get All Local
    Users From /etc/passwd
  ansible.builtin.getent:
    database: passwd
    split: ':'
  tags:
  - CCE-80843-6
  - NIST-800-53-AC-6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSSv4-8.6.1
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - no_shelllogin_for_systemaccounts
  - restrict_strategy

- name: Ensure that System Accounts Do Not Run a Shell Upon Login - Create local_users
    Variable From getent_passwd Facts
  ansible.builtin.set_fact:
    local_users: '{{ ansible_facts.getent_passwd | dict2items }}'
  tags:
  - CCE-80843-6
  - NIST-800-53-AC-6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSSv4-8.6.1
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - no_shelllogin_for_systemaccounts
  - restrict_strategy

- name: Ensure that System Accounts Do Not Run a Shell Upon Login -  Disable Login
    Shell for System Accounts
  ansible.builtin.user:
    name: '{{ item.key }}'
    shell: /sbin/nologin
  loop: '{{ local_users }}'
  when:
  - item.key not in ['root']
  - item.value[1]|int < 1000
  - item.value[5] not in ['/sbin/shutdown', '/sbin/halt', '/bin/sync']
  tags:
  - CCE-80843-6
  - NIST-800-53-AC-6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSSv4-8.6.1
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - no_shelllogin_for_systemaccounts
  - restrict_strategy

Rule   Enforce Usage of pam_wheel with Group Parameter for su Authentication   [ref]

To ensure that only users who are members of the group set in the group pam_wheel parameter can run commands with altered privileges through the su command, make sure that the following line exists in the file /etc/pam.d/su:
auth required pam_wheel.so use_uid group=sugroup
Rationale:
The su program allows to run commands with a substitute user and group ID. It is commonly used to run commands as the root user. Limiting access to such command is considered a good security practice.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_use_pam_wheel_group_for_su
Identifiers and References

Identifiers:  CCE-86064-3

References:  5.3.7


# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_pam_wheel_group_for_su='sugroup'


PAM_CONF=/etc/pam.d/su

pamstr=$(grep -P '^auth\s+required\s+pam_wheel\.so\s+(?=[^#]*\buse_uid\b)(?=[^#]*\bgroup=)' ${PAM_CONF})
if [ -z "$pamstr" ]; then
    sed -Ei '/^auth\b.*\brequired\b.*\bpam_wheel\.so/d' ${PAM_CONF} # remove any remaining uncommented pam_wheel.so line
    sed -Ei "/^auth\s+sufficient\s+pam_rootok\.so.*$/a auth required pam_wheel.so use_uid group=${var_pam_wheel_group_for_su}" ${PAM_CONF}
else
    group_val=$(echo -n "$pamstr" | grep -Eo '\bgroup=[_a-z][-0-9_a-z]*' | cut -d '=' -f 2)
    if [ -z "${group_val}" ] || [ ${group_val} != ${var_pam_wheel_group_for_su} ]; then
        sed -Ei "s/(^auth\s+required\s+pam_wheel.so\s+[^#]*group=)[_a-z][-0-9_a-z]*/\1${var_pam_wheel_group_for_su}/" ${PAM_CONF}
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-86064-3
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - use_pam_wheel_group_for_su
- name: XCCDF Value var_pam_wheel_group_for_su # promote to variable
  set_fact:
    var_pam_wheel_group_for_su: !!str sugroup
  tags:
    - always

- name: Enforce Usage of pam_wheel with Group Parameter for su Authentication - Add
    the group to the /etc/pam.d/su file
  ansible.builtin.lineinfile:
    path: /etc/pam.d/su
    state: present
    regexp: ^[\s]*#[\s]*auth[\s]+required[\s]+pam_wheel\.so[\s]+use_uid group=$
    line: auth             required        pam_wheel.so use_uid group={{ var_pam_wheel_group_for_su
      }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-86064-3
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - use_pam_wheel_group_for_su

Rule   Ensure All Groups on the System Have Unique Group ID   [ref]

Change the group name or delete groups, so each has a unique id.
Warning:  Automatic remediation of this control is not available due to the unique requirements of each system.
Rationale:
To assure accountability and prevent unauthenticated access, groups must be identified uniquely to prevent potential misuse and compromise of the system.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_group_unique_id
Identifiers and References

Identifiers:  CCE-86201-1

References:  CCI-000764, 8.2.1, SRG-OS-000104-GPOS-00051, 6.2.4

Rule   Ensure All Groups on the System Have Unique Group Names   [ref]

Change the group name or delete groups, so each has a unique name.
Warning:  Automatic remediation of this control is not available due to the unique requirements of each system.
Rationale:
To assure accountability and prevent unauthenticated access, groups must be identified uniquely to prevent potential misuse and compromise of the system.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_group_unique_name
Identifiers and References

Identifiers:  CCE-86328-2

References:  8.2.1, 6.2.6

Group   Secure Session Configuration Files for Login Accounts   Group contains 2 groups and 12 rules
[ref]   When a user logs into a Unix account, the system configures the user's session by reading a number of files. Many of these files are located in the user's home directory, and may have weak permissions as a result of user error or misconfiguration. If an attacker can modify or even read certain types of account configuration information, they can often gain full access to the affected user's account. Therefore, it is important to test and correct configuration file permissions for interactive accounts, particularly those of privileged users such as root or system administrators.
Group   Ensure that No Dangerous Directories Exist in Root's Path   Group contains 2 rules
[ref]   The active path of the root account can be obtained by starting a new root shell and running:
# echo $PATH
This will produce a colon-separated list of directories in the path.

Certain path elements could be considered dangerous, as they could lead to root executing unknown or untrusted programs, which could contain malicious code. Since root may sometimes work inside untrusted directories, the . character, which represents the current directory, should never be in the root path, nor should any directory which can be written to by an unprivileged or semi-privileged (system) user.

It is a good practice for administrators to always execute privileged commands by typing the full path to the command.

Rule   Ensure that Root's Path Does Not Include World or Group-Writable Directories   [ref]

For each element in root's path, run:
# ls -ld DIR
and ensure that write permissions are disabled for group and other.
Rationale:
Such entries increase the risk that root could execute code provided by unprivileged users, and potentially malicious code.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_root_path_dirs_no_write
Identifiers and References

Identifiers:  CCE-80672-9

References:  11, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, CCI-000366, 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, CM-6(a), CM-6(a), PR.IP-1, 6.2.7


Complexity:low
Disruption:medium
Reboot:false
Strategy:restrict
- name: Get root paths which are not symbolic links
  stat:
    path: '{{ item }}'
  changed_when: false
  failed_when: false
  register: root_paths
  with_items: '{{ ansible_env.PATH.split('':'') }}'
  tags:
  - CCE-80672-9
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(a)
  - accounts_root_path_dirs_no_write
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Disable writability to root directories
  file:
    path: '{{ item.item }}'
    mode: g-w,o-w
  with_items: '{{ root_paths.results }}'
  when:
  - root_paths.results is defined
  - item.stat.exists
  - not item.stat.islnk
  tags:
  - CCE-80672-9
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(a)
  - accounts_root_path_dirs_no_write
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Rule   Ensure that Root's Path Does Not Include Relative Paths or Null Directories   [ref]

Ensure that none of the directories in root's path is equal to a single . character, or that it contains any instances that lead to relative path traversal, such as .. or beginning a path without the slash (/) character. Also ensure that there are no "empty" elements in the path, such as in these examples:
PATH=:/bin
PATH=/bin:
PATH=/bin::/sbin
These empty elements have the same effect as a single . character.
Rationale:
Including these entries increases the risk that root could execute code from an untrusted location.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_root_path_no_dot
Identifiers and References