Guide to the Secure Configuration of SUSE Linux Enterprise 12

with profile PCI-DSS v4 Control Baseline for SUSE Linux enterprise 12
Ensures PCI-DSS v4 security configuration settings are applied.
This guide presents a catalog of security-relevant configuration settings for SUSE Linux Enterprise 12. It is a rendering of content structured in the eXtensible Configuration Checklist Description Format (XCCDF) in order to support security automation. The SCAP content is is available in the scap-security-guide package which is developed at https://www.open-scap.org/security-policies/scap-security-guide.

Providing system administrators with such guidance informs them how to securely configure systems under their control in a variety of network roles. Policy makers and baseline creators can use this catalog of settings, with its associated references to higher-level security control catalogs, in order to assist them in security baseline creation. This guide is a catalog, not a checklist, and satisfaction of every item is not likely to be possible or sensible in many operational scenarios. However, the XCCDF format enables granular selection and adjustment of settings, and their association with OVAL and OCIL content provides an automated checking capability. Transformations of this document, and its associated automated checking content, are capable of providing baselines that meet a diverse set of policy objectives. Some example XCCDF Profiles, which are selections of items that form checklists and can be used as baselines, are available with this guide. They can be processed, in an automated fashion, with tools that support the Security Content Automation Protocol (SCAP). The DISA STIG, which provides required settings for US Department of Defense systems, is one example of a baseline created from this guidance.
Do not attempt to implement any of the settings in this guide without first testing them in a non-operational environment. The creators of this guidance assume no responsibility whatsoever for its use by other parties, and makes no guarantees, expressed or implied, about its quality, reliability, or any other characteristic.

Profile Information

Profile TitlePCI-DSS v4 Control Baseline for SUSE Linux enterprise 12
Profile IDxccdf_org.ssgproject.content_profile_pci-dss-4

CPE Platforms

  • cpe:/o:suse:linux_enterprise_desktop:12
  • cpe:/o:suse:linux_enterprise_server:12

Revision History

Current version: 0.1.74

  • draft (as of 2024-07-17)

Table of Contents

  1. System Settings
    1. Installing and Maintaining Software
    2. Account and Access Control
    3. GRUB2 bootloader configuration
    4. Configure Syslog
    5. Network Configuration and Firewalls
    6. File Permissions and Masks
  2. Services
    1. Avahi Server
    2. Cron and At Daemons
    3. DHCP
    4. DNS Server
    5. Web Server
    6. LDAP
    7. NFS and RPC
    8. Network Time Protocol
    9. Obsolete Services
    10. Print Support
    11. Samba(SMB) Microsoft Windows File Sharing Server
    12. SNMP Server
    13. SSH Server
    14. System Security Services Daemon
  3. System Accounting with auditd
    1. Configure auditd Rules for Comprehensive Auditing
    2. Configure auditd Data Retention

Checklist

Group   Guide to the Secure Configuration of SUSE Linux Enterprise 12   Group contains 89 groups and 214 rules
Group   System Settings   Group contains 47 groups and 94 rules
[ref]   Contains rules that check correct system settings.
Group   Installing and Maintaining Software   Group contains 11 groups and 23 rules
[ref]   The following sections contain information on security-relevant choices during the initial operating system installation process and the setup of software updates.
Group   System and Software Integrity   Group contains 7 groups and 13 rules
[ref]   System and software integrity can be gained by installing antivirus, increasing system encryption strength with FIPS, verifying installed software, enabling SELinux, installing an Intrusion Prevention System, etc. However, installing or enabling integrity checking tools cannot prevent intrusions, but they can detect that an intrusion may have occurred. Requirements for integrity checking may be highly dependent on the environment in which the system will be used. Snapshot-based approaches such as AIDE may induce considerable overhead in the presence of frequent software updates.
Group   Software Integrity Checking   Group contains 2 groups and 7 rules
[ref]   Both the AIDE (Advanced Intrusion Detection Environment) software and the RPM package management system provide mechanisms for verifying the integrity of installed software. AIDE uses snapshots of file metadata (such as hashes) and compares these to current system files in order to detect changes.

The RPM package management system can conduct integrity checks by comparing information in its metadata database with files installed on the system.
Group   Verify Integrity with RPM   Group contains 3 rules
[ref]   The RPM package management system includes the ability to verify the integrity of installed packages by comparing the installed files with information about the files taken from the package metadata stored in the RPM database. Although an attacker could corrupt the RPM database (analogous to attacking the AIDE database as described above), this check can still reveal modification of important files. To list which files on the system differ from what is expected by the RPM database:
$ rpm -qVa
See the man page for rpm to see a complete explanation of each column.

Rule   Verify File Hashes with RPM   [ref]

Without cryptographic integrity protections, system executables and files can be altered by unauthorized users without detection. The RPM package management system can check the hashes of installed software packages, including many that are important to system security. To verify that the cryptographic hash of system files and commands matches vendor values, run the following command to list which files on the system have hashes that differ from what is expected by the RPM database:
$ rpm -Va --noconfig | grep '^..5'
If the file was not expected to change, investigate the cause of the change using audit logs or other means. The package can then be reinstalled to restore the file. Run the following command to determine which package owns the file:
$ rpm -qf FILENAME
          
The package can be reinstalled from a zypper repository using the command:
$ sudo zypper reinstall PACKAGENAME
          
Alternatively, the package can be reinstalled from trusted media using the command:
$ sudo rpm -Uvh PACKAGENAME
          
Warning:  This rule can take a long time to perform the check and might consume a considerable amount of resources depending on the number of packages present on the system. It is not a problem in most cases, but especially systems with a large number of installed packages can be affected.
Rationale:
The hashes of important files like system executables should match the information given by the RPM database. Executables with erroneous hashes could be a sign of nefarious activity on the system.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_rpm_verify_hashes
Identifiers:

CCE-91632-0

References:
cis-csc11, 2, 3, 9
cjis5.10.4.1
cobit5APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02
cui3.3.8, 3.4.1
disaCCI-000366, CCI-001749
hipaa164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i)
isa-62443-20094.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6
iso27001-2013A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4
nistCM-6(d), CM-6(c), SI-7, SI-7(1), SI-7(6), AU-9(3)
nist-csfPR.DS-6, PR.DS-8, PR.IP-1
pcidssReq-11.5
os-srgSRG-OS-000480-GPOS-00227
pcidss411.5.2

Complexity:high
Disruption:medium
Reboot:false
Strategy:restrict
- name: 'Set fact: Package manager reinstall command'
  set_fact:
    package_manager_reinstall_cmd: zypper reinstall -y
  when: ansible_distribution in [ "Fedora", "RedHat", "CentOS", "OracleLinux" ]
  tags:
  - CCE-91632-0
  - CJIS-5.10.4.1
  - NIST-800-171-3.3.8
  - NIST-800-171-3.4.1
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(c)
  - NIST-800-53-CM-6(d)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - NIST-800-53-SI-7(6)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - high_complexity
  - high_severity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy
  - rpm_verify_hashes

- name: 'Set fact: Package manager reinstall command (zypper)'
  set_fact:
    package_manager_reinstall_cmd: zypper in -f -y
  when: ansible_distribution == "SLES"
  tags:
  - CCE-91632-0
  - CJIS-5.10.4.1
  - NIST-800-171-3.3.8
  - NIST-800-171-3.4.1
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(c)
  - NIST-800-53-CM-6(d)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - NIST-800-53-SI-7(6)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - high_complexity
  - high_severity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy
  - rpm_verify_hashes

- name: Read files with incorrect hash
  command: rpm -Va --nodeps --nosize --nomtime --nordev --nocaps --nolinkto --nouser
    --nogroup --nomode --noghost --noconfig
  register: files_with_incorrect_hash
  changed_when: false
  failed_when: files_with_incorrect_hash.rc > 1
  check_mode: false
  when: (package_manager_reinstall_cmd is defined)
  tags:
  - CCE-91632-0
  - CJIS-5.10.4.1
  - NIST-800-171-3.3.8
  - NIST-800-171-3.4.1
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(c)
  - NIST-800-53-CM-6(d)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - NIST-800-53-SI-7(6)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - high_complexity
  - high_severity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy
  - rpm_verify_hashes

- name: Create list of packages
  command: rpm -qf "{{ item }}"
  with_items: '{{ files_with_incorrect_hash.stdout_lines | map(''regex_findall'',
    ''^[.]+[5]+.* (\/.*)'', ''\1'') | map(''join'') | select(''match'', ''(\/.*)'')
    | list | unique }}'
  register: list_of_packages
  changed_when: false
  check_mode: false
  when:
  - files_with_incorrect_hash.stdout_lines is defined
  - (files_with_incorrect_hash.stdout_lines | length > 0)
  tags:
  - CCE-91632-0
  - CJIS-5.10.4.1
  - NIST-800-171-3.3.8
  - NIST-800-171-3.4.1
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(c)
  - NIST-800-53-CM-6(d)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - NIST-800-53-SI-7(6)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - high_complexity
  - high_severity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy
  - rpm_verify_hashes

- name: Reinstall packages of files with incorrect hash
  command: '{{ package_manager_reinstall_cmd }} ''{{ item }}'''
  with_items: '{{ list_of_packages.results | map(attribute=''stdout_lines'') | list
    | unique }}'
  when:
  - files_with_incorrect_hash.stdout_lines is defined
  - (package_manager_reinstall_cmd is defined and (files_with_incorrect_hash.stdout_lines
    | length > 0))
  tags:
  - CCE-91632-0
  - CJIS-5.10.4.1
  - NIST-800-171-3.3.8
  - NIST-800-171-3.4.1
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(c)
  - NIST-800-53-CM-6(d)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - NIST-800-53-SI-7(6)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - high_complexity
  - high_severity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy
  - rpm_verify_hashes


# Find which files have incorrect hash (not in /etc, because of the system related config files) and then get files names
files_with_incorrect_hash="$(rpm -Va --noconfig | grep -E '^..5' | awk '{print $NF}' )"

if [ -n "$files_with_incorrect_hash" ]; then
    # From files names get package names and change newline to space, because rpm writes each package to new line
    packages_to_reinstall="$(rpm -qf $files_with_incorrect_hash | tr '\n' ' ')"

    
    zypper install -f -y $packages_to_reinstall
    
fi

Rule   Verify and Correct Ownership with RPM   [ref]

The RPM package management system can check file ownership permissions of installed software packages, including many that are important to system security. After locating a file with incorrect permissions, which can be found with:
rpm -Va | awk '{ if (substr($0,6,1)=="U" || substr($0,7,1)=="G") print $NF }'
run the following command to determine which package owns it:
$ rpm -qf FILENAME
          
Next, run the following command to reset its permissions to the correct values:
$ sudo rpm --setugids PACKAGENAME
          
Warning:  Profiles may require that specific files be owned by root while the default owner defined by the vendor is different. Such files will be reported as a finding and need to be evaluated according to your policy and deployment environment.
Warning:  This rule can take a long time to perform the check and might consume a considerable amount of resources depending on the number of packages present on the system. It is not a problem in most cases, but especially systems with a large number of installed packages can be affected.
Rationale:
Ownership of binaries and configuration files that is incorrect could allow an unauthorized user to gain privileges that they should not have. The ownership set by the vendor should be maintained. Any deviations from this baseline should be investigated.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_rpm_verify_ownership
Identifiers:

CCE-91649-4

References:
cis-csc1, 11, 12, 13, 14, 15, 16, 18, 3, 5, 6, 9
cjis5.10.4.1
cobit5APO01.06, APO11.04, BAI03.05, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.04, DSS05.07, DSS06.02, MEA02.01
cui3.3.8, 3.4.1
disaCCI-001494, CCI-001496
isa-62443-20094.3.3.3.9, 4.3.3.5.8, 4.3.3.7.3, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4
isa-62443-2013SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 5.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.5.1, A.12.6.2, A.12.7.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R4.2, CIP-003-8 R6, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2
nistCM-6(d), CM-6(c), SI-7, SI-7(1), SI-7(6), AU-9(3)
nist-csfPR.AC-4, PR.DS-5, PR.IP-1, PR.PT-1
pcidssReq-11.5
os-srgSRG-OS-000256-GPOS-00097, SRG-OS-000257-GPOS-00098, SRG-OS-000278-GPOS-00108
cis6.1.1
pcidss411.5.2

Rule   Verify and Correct File Permissions with RPM   [ref]

The RPM package management system can check file access permissions of installed software packages, including many that are important to system security. Verify that the file permissions of system files and commands match vendor values. Check the file permissions with the following command:
$ sudo rpm -Va | awk '{ if (substr($0,2,1)=="M") print $NF }'
Output indicates files that do not match vendor defaults. After locating a file with incorrect permissions, run the following command to determine which package owns it:
$ rpm -qf FILENAME
          

Next, run the following command to reset its permissions to the correct values:
$ sudo rpm --setperms PACKAGENAME
          
Warning:  Profiles may require that specific files have stricter file permissions than defined by the vendor. Such files will be reported as a finding and need to be evaluated according to your policy and deployment environment.
Warning:  This rule can take a long time to perform the check and might consume a considerable amount of resources depending on the number of packages present on the system. It is not a problem in most cases, but especially systems with a large number of installed packages can be affected.
Rationale:
Permissions on system binaries and configuration files that are too generous could allow an unauthorized user to gain privileges that they should not have. The permissions set by the vendor should be maintained. Any deviations from this baseline should be investigated.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_rpm_verify_permissions
Identifiers:

CCE-91634-6

References:
cis-csc1, 11, 12, 13, 14, 15, 16, 18, 3, 5, 6, 9
cjis5.10.4.1
cobit5APO01.06, APO11.04, BAI03.05, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.04, DSS05.07, DSS06.02, MEA02.01
cui3.3.8, 3.4.1
disaCCI-001493, CCI-001494, CCI-001495, CCI-001496
hipaa164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i)
isa-62443-20094.3.3.3.9, 4.3.3.5.8, 4.3.3.7.3, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4
isa-62443-2013SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 5.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.5.1, A.12.6.2, A.12.7.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R4.2, CIP-003-8 R6, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2
nistCM-6(d), CM-6(c), SI-7, SI-7(1), SI-7(6), AU-9(3), CM-6(a)
nist-csfPR.AC-4, PR.DS-5, PR.IP-1, PR.PT-1
pcidssReq-11.5
os-srgSRG-OS-000256-GPOS-00097, SRG-OS-000257-GPOS-00098, SRG-OS-000258-GPOS-00099, SRG-OS-000278-GPOS-00108
cis6.1.1
pcidss411.5.2

Complexity:high
Disruption:medium
Reboot:false
Strategy:restrict
- name: Read list of files with incorrect permissions
  command: rpm -Va --nodeps --nosignature --nofiledigest --nosize --nomtime --nordev
    --nocaps --nolinkto --nouser --nogroup
  register: files_with_incorrect_permissions
  failed_when: files_with_incorrect_permissions.rc > 1
  changed_when: false
  check_mode: false
  tags:
  - CCE-91634-6
  - CJIS-5.10.4.1
  - NIST-800-171-3.3.8
  - NIST-800-171-3.4.1
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(c)
  - NIST-800-53-CM-6(d)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - NIST-800-53-SI-7(6)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - high_complexity
  - high_severity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy
  - rpm_verify_permissions

- name: Create list of packages
  command: rpm -qf "{{ item }}"
  with_items: '{{ files_with_incorrect_permissions.stdout_lines | map(''regex_findall'',
    ''^[.]+[M]+.* (\/.*)'', ''\1'') | map(''join'') | select(''match'', ''(\/.*)'')
    | list | unique }}'
  register: list_of_packages
  changed_when: false
  check_mode: false
  when: (files_with_incorrect_permissions.stdout_lines | length > 0)
  tags:
  - CCE-91634-6
  - CJIS-5.10.4.1
  - NIST-800-171-3.3.8
  - NIST-800-171-3.4.1
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(c)
  - NIST-800-53-CM-6(d)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - NIST-800-53-SI-7(6)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - high_complexity
  - high_severity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy
  - rpm_verify_permissions

- name: Correct file permissions with RPM
  command: rpm --setperms '{{ item }}'
  with_items: '{{ list_of_packages.results | map(attribute=''stdout_lines'') | list
    | unique }}'
  when: (files_with_incorrect_permissions.stdout_lines | length > 0)
  tags:
  - CCE-91634-6
  - CJIS-5.10.4.1
  - NIST-800-171-3.3.8
  - NIST-800-171-3.4.1
  - NIST-800-53-AU-9(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(c)
  - NIST-800-53-CM-6(d)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - NIST-800-53-SI-7(6)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - high_complexity
  - high_severity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy
  - rpm_verify_permissions

Complexity:high
Disruption:medium
Reboot:false
Strategy:restrict

# Declare array to hold set of RPM packages we need to correct permissions for
declare -A SETPERMS_RPM_DICT

# Create a list of files on the system having permissions different from what
# is expected by the RPM database
readarray -t FILES_WITH_INCORRECT_PERMS < <(rpm -Va --nofiledigest | awk '{ if (substr($0,2,1)=="M") print $NF }')

for FILE_PATH in "${FILES_WITH_INCORRECT_PERMS[@]}"
do
        # NOTE: some files maybe controlled by more then one package
        readarray -t RPM_PACKAGES < <(rpm -qf "${FILE_PATH}")
        for RPM_PACKAGE in "${RPM_PACKAGES[@]}"
        do
                # Use an associative array to store packages as it's keys, not having to care about duplicates.
                SETPERMS_RPM_DICT["$RPM_PACKAGE"]=1
        done
done

# For each of the RPM packages left in the list -- reset its permissions to the
# correct values
for RPM_PACKAGE in "${!SETPERMS_RPM_DICT[@]}"
do
	rpm --restore "${RPM_PACKAGE}"
done
Group   Verify Integrity with AIDE   Group contains 4 rules
[ref]   AIDE conducts integrity checks by comparing information about files with previously-gathered information. Ideally, the AIDE database is created immediately after initial system configuration, and then again after any software update. AIDE is highly configurable, with further configuration information located in /usr/share/doc/aide-VERSION .

Rule   Install AIDE   [ref]

The aide package can be installed with the following command:
$ sudo zypper install aide
Rationale:
The AIDE package must be installed if it is to be available for integrity checking.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_aide_installed
Identifiers:

CCE-83067-9

References:
cis-csc1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9
cjis5.10.1.3
cobit5APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06
disaCCI-002696, CCI-002699, CCI-001744
isa-62443-20094.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6
ism1034, 1288, 1341, 1417
iso27001-2013A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3
nistCM-6(a)
nist-csfDE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3
pcidssReq-11.5
os-srgSRG-OS-000445-GPOS-00199
stigidSLES-12-010499
cis1.4.1
anssiR76, R79
pcidss411.5.2
stigrefSV-255916r880937_rule


[[packages]]
name = "aide"
version = "*"

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Ensure aide is installed
  package:
    name: aide
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83067-9
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-12-010499
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_aide_installed

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

zypper install -y "aide"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include install_aide

class install_aide {
  package { 'aide':
    ensure => 'installed',
  }
}

Rule   Build and Test AIDE Database   [ref]

Run the following command to generate a new database:
$ sudo /usr/bin/aide --init
By default, the database will be written to the file /var/lib/aide/aide.db.new. Storing the database, the configuration file /etc/aide.conf, and the binary /usr/bin/aide (or hashes of these files), in a secure location (such as on read-only media) provides additional assurance about their integrity. The newly-generated database can be installed as follows:
$ sudo cp /var/lib/aide/aide.db.new /var/lib/aide/aide.db
To initiate a manual check, run the following command:
$ sudo /usr/bin/aide --check
If this check produces any unexpected output, investigate.
Rationale:
For AIDE to be effective, an initial database of "known-good" information about files must be captured and it should be able to be verified against the installed files.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_aide_build_database
Identifiers:

CCE-91483-8

References:
cis-csc1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9
cjis5.10.1.3
cobit5APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06
isa-62443-20094.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6
iso27001-2013A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3
nistCM-6(a)
nist-csfDE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3
pcidssReq-11.5
os-srgSRG-OS-000445-GPOS-00199
stigidSLES-12-010499
cis1.4.1
anssiR76, R79
pcidss411.5.2
stigrefSV-255916r880937_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Build and Test AIDE Database - Ensure Repositories Are Updated
  ansible.builtin.command: zypper -q --no-remote ref
  failed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91483-8
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-12-010499
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Ensure AIDE Is Installed
  ansible.builtin.package:
    name: '{{ item }}'
    state: present
  with_items:
  - aide
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91483-8
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-12-010499
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Build and Test AIDE Database
  ansible.builtin.command: /usr/bin/aide --init
  changed_when: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91483-8
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-12-010499
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Check Whether the Stock AIDE Database Exists
  ansible.builtin.stat:
    path: /var/lib/aide/aide.db.new
  register: aide_database_stat
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91483-8
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-12-010499
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Stage AIDE Database
  ansible.builtin.copy:
    src: /var/lib/aide/aide.db.new
    dest: /var/lib/aide/aide.db
    backup: true
    remote_src: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - (aide_database_stat.stat.exists is defined and aide_database_stat.stat.exists)
  tags:
  - CCE-91483-8
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-12-010499
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

zypper -q --no-remote ref


zypper install -y "aide"

/usr/bin/aide --init
/bin/cp -p /var/lib/aide/aide.db.new /var/lib/aide/aide.db

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Configure Systemd Timer Execution of AIDE   [ref]

At a minimum, AIDE should be configured to run a weekly scan. To implement a systemd service and a timer unit to run the service periodically: For example, if a systemd timer is expected to be started every day at 5AM
OnCalendar=*-*-* 05:00:0
[Timer]
section in the timer unit and a Unit section starting the AIDE check service unit should be referred.
Rationale:
AIDE provides a means to check if unauthorized changes are made to the system. AIDE itself does not setup a periodic execution, so in order to detect unauthorized changes a systemd service to run the check and a systemd timer to take care of periodical execution of that systemd service should be defined.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_aide_periodic_checking_systemd_timer
Identifiers:

CCE-92366-4

References:
cis-csc1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9
cjis5.10.1.3
cobit5APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06
disaCCI-001744, CCI-002699, CCI-002702
isa-62443-20094.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6
iso27001-2013A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3
nistSI-7, SI-7(1), CM-6(a)
nist-csfDE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3
pcidssReq-11.5
os-srgSRG-OS-000363-GPOS-00150, SRG-OS-000446-GPOS-00200, SRG-OS-000447-GPOS-00201
cis1.4.2
anssiR76
pcidss411.5.2

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92366-4
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_checking_systemd_timer
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Configure Systemd Timer Execution of AIDE - Define AIDE Periodic Check Service
  ansible.builtin.blockinfile:
    create: true
    dest: /etc/systemd/system/aidecheck.service
    owner: root
    group: root
    mode: '0644'
    block: |
      [Unit]
      Description=Aide Check
      [Service]
      Type=simple
      ExecStart=/usr/bin/aide --check
      [Install]
      WantedBy=multi-user.target
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"aide" in ansible_facts.packages'
  tags:
  - CCE-92366-4
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_checking_systemd_timer
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Configure Systemd Timer Execution of AIDE - Define AIDE Periodic Check Service
    Timer
  ansible.builtin.blockinfile:
    create: true
    dest: /etc/systemd/system/aidecheck.timer
    owner: root
    group: root
    mode: '0644'
    block: |
      [Unit]
      Description=Aide check every day at 5AM
      [Timer]
      OnCalendar=*-*-* 05:00:00
      Unit=aidecheck.service
      [Install]
      WantedBy=multi-user.target
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"aide" in ansible_facts.packages'
  tags:
  - CCE-92366-4
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_checking_systemd_timer
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Configure Systemd Timer Execution of AIDE - Ensure AIDE Service is Enabled
  ansible.builtin.systemd:
    name: aidecheck.service
    enabled: true
    daemon_reload: true
    masked: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"aide" in ansible_facts.packages'
  tags:
  - CCE-92366-4
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_checking_systemd_timer
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Configure Systemd Timer Execution of AIDE - Ensure AIDE Service Timer is Enabled
  ansible.builtin.systemd:
    name: aidecheck.timer
    state: started
    enabled: true
    daemon_reload: true
    masked: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"aide" in ansible_facts.packages'
  tags:
  - CCE-92366-4
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_checking_systemd_timer
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q aide; }; then

zypper install -y "aide"

# create unit file for periodic aide database check
cat > /etc/systemd/system/aidecheck.service <<EOF
[Unit]
Description=Aide Check
[Service]
Type=simple
ExecStart=/usr/bin/aide --check
[Install]
WantedBy=multi-user.target
EOF

# create unit file for the aide check timer
cat > /etc/systemd/system/aidecheck.timer <<EOF
[Unit]
Description=Aide check every day at 5AM
[Timer]
OnCalendar=*-*-* 05:00:00
Unit=aidecheck.service
[Install]
WantedBy=multi-user.target
EOF

#  setup service unit files attributes
chown root:root /etc/systemd/system/aidecheck.*
chmod 0644 /etc/systemd/system/aidecheck.*

# enable the aide related services
systemctl daemon-reload
systemctl enable aidecheck.service
systemctl --now enable aidecheck.timer

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Configure Periodic Execution of AIDE   [ref]

At a minimum, AIDE should be configured to run a weekly scan. To implement a daily execution of AIDE at 4:05am using cron, add the following line to /etc/crontab:
05 4 * * * root /usr/bin/aide --check
To implement a weekly execution of AIDE at 4:05am using cron, add the following line to /etc/crontab:
05 4 * * 0 root /usr/bin/aide --check
AIDE can be executed periodically through other means; this is merely one example. The usage of cron's special time codes, such as @daily and @weekly is acceptable.
Rationale:
By default, AIDE does not install itself for periodic execution. Periodically running AIDE is necessary to reveal unexpected changes in installed files.

Unauthorized changes to the baseline configuration could make the system vulnerable to various attacks or allow unauthorized access to the operating system. Changes to operating system configurations can have unintended side effects, some of which may be relevant to security.

Detecting such changes and providing an automated response can help avoid unintended, negative consequences that could ultimately affect the security state of the operating system. The operating system's Information Management Officer (IMO)/Information System Security Officer (ISSO) and System Administrators (SAs) must be notified via email and/or monitoring system trap when there is an unauthorized modification of a configuration item.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_aide_periodic_cron_checking
Identifiers:

CCE-91529-8

References:
cis-csc1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9
cjis5.10.1.3
cobit5APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06
disaCCI-001744, CCI-002699, CCI-002702
isa-62443-20094.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6
iso27001-2013A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3
nistSI-7, SI-7(1), CM-6(a)
nist-csfDE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3
pcidssReq-11.5
os-srgSRG-OS-000363-GPOS-00150, SRG-OS-000446-GPOS-00200, SRG-OS-000447-GPOS-00201
stigidSLES-12-010500
cis1.4.2
anssiR76
pcidss411.5.2
stigrefSV-217148r902840_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Ensure AIDE is installed
  package:
    name: '{{ item }}'
    state: present
  with_items:
  - aide
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91529-8
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-12-010500
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set cron package name - RedHat
  set_fact:
    cron_pkg_name: cronie
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_os_family == "RedHat" or ansible_os_family == "Suse"
  tags:
  - CCE-91529-8
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-12-010500
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set cron package name - Debian
  set_fact:
    cron_pkg_name: cron
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_os_family == "Debian"
  tags:
  - CCE-91529-8
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-12-010500
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Install cron
  package:
    name: '{{ cron_pkg_name }}'
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91529-8
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-12-010500
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure Periodic Execution of AIDE
  cron:
    name: run AIDE check
    minute: 5
    hour: 4
    weekday: 0
    user: root
    job: /usr/bin/aide --check
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91529-8
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-12-010500
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

zypper install -y "aide"

if ! grep -q "/usr/bin/aide --check" /etc/crontab ; then
    echo "05 4 * * * root /usr/bin/aide --check" >> /etc/crontab
else
    sed -i '\!^.* --check.*$!d' /etc/crontab
    echo "05 4 * * * root /usr/bin/aide --check" >> /etc/crontab
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   System Cryptographic Policies   Group contains 3 rules
[ref]   Linux has the capability to centrally configure cryptographic polices. The command update-crypto-policies is used to set the policy applicable for the various cryptographic back-ends, such as SSL/TLS libraries. The configured cryptographic policies will be the default policy used by these backends unless the application user configures them otherwise. When the system has been configured to use the centralized cryptographic policies, the administrator is assured that any application that utilizes the supported backends will follow a policy that adheres to the configured profile. Currently the supported backends are:
  • GnuTLS library
  • OpenSSL library
  • NSS library
  • OpenJDK
  • Libkrb5
  • BIND
  • OpenSSH
Applications and languages which rely on any of these backends will follow the system policies as well. Examples are apache httpd, nginx, php, and others.

Rule   Configure Libreswan to use System Crypto Policy   [ref]

Crypto Policies provide a centralized control over crypto algorithms usage of many packages. Libreswan is supported by system crypto policy, but the Libreswan configuration may be set up to ignore it. To check that Crypto Policies settings are configured correctly, ensure that the /etc/ipsec.conf includes the appropriate configuration file. In /etc/ipsec.conf, make sure that the following line is not commented out or superseded by later includes: include /etc/crypto-policies/back-ends/libreswan.config
Rationale:
Overriding the system crypto policy makes the behavior of the Libreswan service violate expectations, and makes system configuration more fragmented.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_configure_libreswan_crypto_policy
Identifiers:

CCE-91637-9

References:
nerc-cipCIP-003-8 R4.2, CIP-007-3 R5.1
nistCM-6(a), MA-4(6), SC-13, SC-12(2), SC-12(3)
osppFCS_IPSEC_EXT.1.4, FCS_IPSEC_EXT.1.6
pcidssReq-2.2
os-srgSRG-OS-000033-GPOS-00014

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Configure Libreswan to use System Crypto Policy
  lineinfile:
    path: /etc/ipsec.conf
    line: include /etc/crypto-policies/back-ends/libreswan.config
    create: true
  tags:
  - CCE-91637-9
  - NIST-800-53-CM-6(a)
  - NIST-800-53-MA-4(6)
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - PCI-DSS-Req-2.2
  - configure_libreswan_crypto_policy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - restrict_strategy


function remediate_libreswan_crypto_policy() {
    CONFIG_FILE="/etc/ipsec.conf"
    if ! grep -qP "^\s*include\s+/etc/crypto-policies/back-ends/libreswan.config\s*(?:#.*)?$" "$CONFIG_FILE" ; then
        # the file might not end with a new line
        echo -e '\ninclude /etc/crypto-policies/back-ends/libreswan.config' >> "$CONFIG_FILE"
    fi
    return 0
}

remediate_libreswan_crypto_policy

Rule   Configure OpenSSL library to use System Crypto Policy   [ref]

Crypto Policies provide a centralized control over crypto algorithms usage of many packages. OpenSSL is supported by crypto policy, but the OpenSSL configuration may be set up to ignore it. To check that Crypto Policies settings are configured correctly, you have to examine the OpenSSL config file available under /etc/ssl/openssl.cnf. This file has the ini format, and it enables crypto policy support if there is a [ crypto_policy ] section that contains the .include /etc/crypto-policies/back-ends/opensslcnf.config directive.
Rationale:
Overriding the system crypto policy makes the behavior of the Java runtime violates expectations, and makes system configuration more fragmented.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_configure_openssl_crypto_policy
Identifiers:

CCE-91638-7

References:
disaCCI-001453
nerc-cipCIP-003-8 R4.2, CIP-007-3 R5.1, CIP-007-3 R7.1
nistAC-17(a), AC-17(2), CM-6(a), MA-4(6), SC-13, SC-12(2), SC-12(3)
pcidssReq-2.2
os-srgSRG-OS-000250-GPOS-00093

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Configure OpenSSL library to use System Crypto Policy - Search for crypto_policy
    Section
  ansible.builtin.find:
    paths: /etc/ssl
    patterns: openssl.cnf
    contains: ^\s*\[\s*crypto_policy\s*]
  register: test_crypto_policy_group
  tags:
  - CCE-91638-7
  - NIST-800-53-AC-17(2)
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-MA-4(6)
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - PCI-DSS-Req-2.2
  - configure_openssl_crypto_policy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Configure OpenSSL library to use System Crypto Policy - Search for crypto_policy
    Section Together With .include Directive
  ansible.builtin.find:
    paths: /etc/ssl
    patterns: openssl.cnf
    contains: ^\s*\.include\s*(?:=\s*)?/etc/crypto-policies/back-ends/opensslcnf.config$
  register: test_crypto_policy_include_directive
  tags:
  - CCE-91638-7
  - NIST-800-53-AC-17(2)
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-MA-4(6)
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - PCI-DSS-Req-2.2
  - configure_openssl_crypto_policy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Configure OpenSSL library to use System Crypto Policy - Add .include Line
    for opensslcnf.config File in crypto_policy Section
  ansible.builtin.lineinfile:
    create: true
    insertafter: ^\s*\[\s*crypto_policy\s*]\s*
    line: .include /etc/crypto-policies/back-ends/opensslcnf.config
    path: /etc/ssl/openssl.cnf
  when:
  - test_crypto_policy_group.matched > 0
  - test_crypto_policy_include_directive.matched == 0
  tags:
  - CCE-91638-7
  - NIST-800-53-AC-17(2)
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-MA-4(6)
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - PCI-DSS-Req-2.2
  - configure_openssl_crypto_policy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Configure OpenSSL library to use System Crypto Policy - Add crypto_policy
    Section With .include for opensslcnf.config File
  ansible.builtin.lineinfile:
    create: true
    line: |-
      [crypto_policy]
      .include /etc/crypto-policies/back-ends/opensslcnf.config
    path: /etc/ssl/openssl.cnf
  when: test_crypto_policy_group.matched == 0
  tags:
  - CCE-91638-7
  - NIST-800-53-AC-17(2)
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-MA-4(6)
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - PCI-DSS-Req-2.2
  - configure_openssl_crypto_policy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy


OPENSSL_CRYPTO_POLICY_SECTION='[ crypto_policy ]'
OPENSSL_CRYPTO_POLICY_SECTION_REGEX='\[\s*crypto_policy\s*\]'

OPENSSL_CRYPTO_POLICY_INCLUSION='.include /etc/crypto-policies/back-ends/opensslcnf.config'

OPENSSL_CRYPTO_POLICY_INCLUSION_REGEX='^\s*\.include\s*(?:=\s*)?/etc/crypto-policies/back-ends/opensslcnf.config$'



  


function remediate_openssl_crypto_policy() {
	CONFIG_FILE=/etc/ssl/openssl.cnf
	if test -f "$CONFIG_FILE"; then
		if ! grep -q "^\\s*$OPENSSL_CRYPTO_POLICY_SECTION_REGEX" "$CONFIG_FILE"; then
			printf '\n%s\n\n%s' "$OPENSSL_CRYPTO_POLICY_SECTION" "$OPENSSL_CRYPTO_POLICY_INCLUSION" >> "$CONFIG_FILE"
			return 0
		elif ! grep -q "^\\s*$OPENSSL_CRYPTO_POLICY_INCLUSION_REGEX" "$CONFIG_FILE"; then
			sed -i "s|$OPENSSL_CRYPTO_POLICY_SECTION_REGEX|&\\n\\n$OPENSSL_CRYPTO_POLICY_INCLUSION\\n|" "$CONFIG_FILE"
			return 0
		fi
	else
		echo "Aborting remediation as '$CONFIG_FILE' was not even found." >&2
		return 1
	fi
}

remediate_openssl_crypto_policy

Rule   Configure SSH to use System Crypto Policy   [ref]

Crypto Policies provide a centralized control over crypto algorithms usage of many packages. SSH is supported by crypto policy, but the SSH configuration may be set up to ignore it. To check that Crypto Policies settings are configured correctly, ensure that the CRYPTO_POLICY variable is either commented or not set at all in the /etc/sysconfig/sshd.
Rationale:
Overriding the system crypto policy makes the behavior of the SSH service violate expectations, and makes system configuration more fragmented.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_configure_ssh_crypto_policy
Identifiers:

CCE-91639-5

References:
disaCCI-001453
hipaa164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.312(e)(1), 164.312(e)(2)(ii)
nerc-cipCIP-003-8 R4.2, CIP-007-3 R5.1, CIP-007-3 R7.1
nistAC-17(a), AC-17(2), CM-6(a), MA-4(6), SC-13
osppFCS_SSH_EXT.1, FCS_SSHS_EXT.1, FCS_SSHC_EXT.1
pcidssReq-2.2
os-srgSRG-OS-000250-GPOS-00093
pcidss42.2.7

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Configure SSH to use System Crypto Policy
  lineinfile:
    dest: /etc/sysconfig/sshd
    state: absent
    regexp: (?i)^\s*CRYPTO_POLICY.*$
  tags:
  - CCE-91639-5
  - NIST-800-53-AC-17(2)
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-MA-4(6)
  - NIST-800-53-SC-13
  - PCI-DSS-Req-2.2
  - PCI-DSSv4-2.2.7
  - configure_ssh_crypto_policy
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required


SSH_CONF="/etc/sysconfig/sshd"

sed -i "/^\s*CRYPTO_POLICY.*$/Id" $SSH_CONF
Group   Endpoint Protection Software   Group contains 2 groups and 2 rules
[ref]   Endpoint protection security software that is not provided or supported by Red Hat can be installed to provide complementary or duplicative security capabilities to those provided by the base platform. Add-on software may not be appropriate for some specialized systems.
Group   McAfee Endpoint Security Software   Group contains 1 group and 1 rule
[ref]   In DoD environments, McAfee Host-based Security System (HBSS) and VirusScan Enterprise for Linux (VSEL) is required to be installed on all systems.
Group   McAfee Host-Based Intrusion Detection Software (HBSS)   Group contains 1 rule
[ref]   McAfee Host-based Security System (HBSS) is a suite of software applications used to monitor, detect, and defend computer networks and systems.

Rule   Install the Host Intrusion Prevention System (HIPS) Module   [ref]

Install the McAfee Host Intrusion Prevention System (HIPS) Module if it is absolutely necessary. If SELinux is enabled, do not install or enable this module.
Warning:  Installing and enabling this module conflicts with SELinux. Per DoD/DISA guidance, SELinux takes precedence over this module.
Warning:  Due to McAfee HIPS being 3rd party software, automated remediation is not available for this configuration check.
Rationale:
Without a host-based intrusion detection tool, there is no system-level defense when an intruder gains access to a system or network. Additionally, a host-based intrusion prevention tool can provide methods to immediately lock out detected intrusion attempts.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_MFEhiplsm_installed
Identifiers:

CCE-91650-2

References:
cis-csc1, 11, 12, 13, 14, 15, 16, 18, 19, 2, 3, 4, 5, 6, 7, 8, 9
cobit5APO01.06, APO07.06, APO08.04, APO10.05, APO11.06, APO12.01, APO12.02, APO12.03, APO12.04, APO12.06, APO13.01, APO13.02, BAI08.02, BAI08.04, DSS01.03, DSS01.05, DSS02.04, DSS02.05, DSS02.07, DSS03.01, DSS03.04, DSS03.05, DSS04.05, DSS05.01, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.01, DSS06.02, MEA03.03, MEA03.04
disaCCI-000366, CCI-001233, CCI-001263
isa-62443-20094.2.3, 4.2.3.12, 4.2.3.7, 4.2.3.9, 4.3.3.4, 4.3.4.5.2, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.3.4.5.9, 4.4.3.2, 4.4.3.3, 4.4.3.4
isa-62443-2013SR 2.10, SR 2.11, SR 2.12, SR 2.4, SR 2.8, SR 2.9, SR 3.1, SR 3.3, SR 3.5, SR 3.8, SR 3.9, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.4.1, A.12.4.3, A.12.5.1, A.12.6.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.7, A.14.2.8, A.15.2.1, A.16.1.1, A.16.1.2, A.16.1.3, A.16.1.4, A.16.1.5, A.16.1.6, A.16.1.7, A.18.1.4, A.18.2.2, A.18.2.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, Clause 16.1.2, Clause 7.4
nistCM-6(a)
nist-csfDE.AE-1, DE.AE-2, DE.AE-3, DE.AE-4, DE.CM-1, DE.CM-5, DE.CM-6, DE.CM-7, DE.DP-2, DE.DP-3, DE.DP-4, DE.DP-5, ID.RA-1, PR.AC-5, PR.DS-5, PR.IP-8, PR.PT-4, RS.AN-1, RS.CO-3
pcidssReq-11.4
os-srgSRG-OS-000191-GPOS-00080, SRG-OS-000196, SRG-OS-000480-GPOS-00227

Rule   Install Intrusion Detection Software   [ref]

The base SUSE Linux Enterprise 12 platform already includes a sophisticated auditing system that can detect intruder activity, as well as SELinux, which provides host-based intrusion prevention capabilities by confining privileged programs and user sessions which may become compromised.
Warning:  In DoD environments, supplemental intrusion detection and antivirus tools, such as the McAfee Host-based Security System, are available to integrate with existing infrastructure. Per DISA guidance, when these supplemental tools interfere with proper functioning of SELinux, SELinux takes precedence. Should further clarification be required, DISA contact information is published publicly at https://public.cyber.mil/stigs/
Rationale:
Host-based intrusion detection tools provide a system-level defense when an intruder gains access to a system or network.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_install_hids
Identifiers:

CCE-92218-7

References:
cis-csc1, 12, 13, 14, 15, 16, 18, 7, 8, 9
cobit5APO01.06, APO13.01, DSS01.03, DSS01.05, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02
disaCCI-001263
isa-62443-20094.3.3.4
isa-62443-2013SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nistCM-6(a)
nist-csfDE.CM-1, PR.AC-5, PR.DS-5, PR.PT-4
pcidssReq-11.4
Group   GNOME Desktop Environment   Group contains 1 group and 6 rules
[ref]   GNOME is a graphical desktop environment bundled with many Linux distributions that allow users to easily interact with the operating system graphically rather than textually. The GNOME Graphical Display Manager (GDM) provides login, logout, and user switching contexts as well as display server management.

GNOME is developed by the GNOME Project and is considered the default Red Hat Graphical environment.

For more information on GNOME and the GNOME Project, see https://www.gnome.org.
Group   Configure GNOME Screen Locking   Group contains 5 rules
[ref]   In the default GNOME3 desktop, the screen can be locked by selecting the user name in the far right corner of the main panel and selecting Lock.

The following sections detail commands to enforce idle activation of the screensaver, screen locking, a blank-screen screensaver, and an idle activation time.

Because users should be trained to lock the screen when they step away from the computer, the automatic locking feature is only meant as a backup.

The root account can be screen-locked; however, the root account should never be used to log into an X Windows environment and should only be used to for direct login via console in emergency circumstances.

For more information about enforcing preferences in the GNOME3 environment using the DConf configuration system, see http://wiki.gnome.org/dconf and the man page dconf(1).

Rule   Enable GNOME3 Screensaver Idle Activation   [ref]

To activate the screensaver in the GNOME3 desktop after a period of inactivity, add or set idle-activation-enabled to true in /etc/dconf/db/local.d/00-security-settings. For example:
[org/gnome/desktop/screensaver]
idle-activation-enabled=true
Once the setting has been added, add a lock to /etc/dconf/db/local.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/desktop/screensaver/idle-activation-enabled
After the settings have been set, run dconf update.
Rationale:
A session time-out lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not logout because of the temporary nature of the absence. Rather than relying on the user to manually lock their operating system session prior to vacating the vicinity, GNOME desktops can be configured to identify when a user's session has idled and take action to initiate the session lock.

Enabling idle activation of the screensaver ensures the screensaver will be activated after the idle delay. Applications requiring continuous, real-time screen display (such as network management products) require the login session does not have administrator rights and the display station is located in a controlled-access area.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_idle_activation_enabled
Identifiers:

CCE-92219-5

References:
cis-csc1, 12, 15, 16
cjis5.5.5
cobit5DSS05.04, DSS05.10, DSS06.10
cui3.1.10
disaCCI-000057
isa-62443-20094.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nistCM-6(a), AC-11(a)
nist-csfPR.AC-7
osppFMT_MOF_EXT.1
pcidssReq-8.1.8
os-srgSRG-OS-000029-GPOS-00010
pcidss48.2.8

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92219-5
  - CJIS-5.5.5
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_idle_activation_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Enable GNOME3 Screensaver Idle Activation
  ini_file:
    dest: /etc/dconf/db/local.d/00-security-settings
    section: org/gnome/desktop/screensaver
    option: idle-activation-enabled
    value: 'true'
    create: true
    no_extra_spaces: true
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92219-5
  - CJIS-5.5.5
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_idle_activation_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Prevent user modification of GNOME idle-activation-enabled
  lineinfile:
    path: /etc/dconf/db/local.d/locks/00-security-settings-lock
    regexp: ^/org/gnome/desktop/screensaver/idle-activation-enabled$
    line: /org/gnome/desktop/screensaver/idle-activation-enabled
    create: true
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92219-5
  - CJIS-5.5.5
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_idle_activation_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Dconf Update
  command: dconf update
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92219-5
  - CJIS-5.5.5
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_idle_activation_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/desktop/screensaver\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|local.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/local.d/00-security-settings"
DBDIR="/etc/dconf/db/local.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*idle-activation-enabled\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)idle-activation-enabled(\s*=)/#\1idle-activation-enabled\2/g" "${SETTINGSFILES[@]}"
    fi
fi

[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/desktop/screensaver\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/desktop/screensaver]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "true")"
if grep -q "^\\s*idle-activation-enabled\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*idle-activation-enabled\\s*=\\s*.*/idle-activation-enabled=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/desktop/screensaver\\]|a\\idle-activation-enabled=${escaped_value}" "${DCONFFILE}"
fi
dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/desktop/screensaver/idle-activation-enabled$" "/etc/dconf/db/" \
            | grep -v 'distro\|ibus\|local.d' | grep ":" | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/local.d/locks"

mkdir -p "${LOCKSFOLDER}"

# Comment out the configurations in databases different from the target one
if [[ ! -z "${LOCKFILES}" ]]
then
    sed -i -E "s|^/org/gnome/desktop/screensaver/idle-activation-enabled$|#&|" "${LOCKFILES[@]}"
fi

if ! grep -qr "^/org/gnome/desktop/screensaver/idle-activation-enabled$" /etc/dconf/db/local.d/
then
    echo "/org/gnome/desktop/screensaver/idle-activation-enabled" >> "/etc/dconf/db/local.d/locks/00-security-settings-lock"
fi
dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set GNOME3 Screensaver Inactivity Timeout   [ref]

The idle time-out value for inactivity in the GNOME3 desktop is configured via the idle-delay setting must be set under an appropriate configuration file(s) in the /etc/dconf/db/local.d directory and locked in /etc/dconf/db/local.d/locks directory to prevent user modification.

For example, to configure the system for a 15 minute delay, add the following to /etc/dconf/db/local.d/00-security-settings:
[org/gnome/desktop/session]
idle-delay=uint32 900
Rationale:
A session time-out lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not logout because of the temporary nature of the absence. Rather than relying on the user to manually lock their operating system session prior to vacating the vicinity, GNOME3 can be configured to identify when a user's session has idled and take action to initiate a session lock.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_idle_delay
Identifiers:

CCE-83010-9

References:
cis-csc1, 12, 15, 16
cjis5.5.5
cobit5DSS05.04, DSS05.10, DSS06.10
cui3.1.10
disaCCI-000057, CCI-000060
isa-62443-20094.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nistAC-11(a), AC-11.1 (ii)
nist-csfPR.AC-7
osppFMT_MOF_EXT.1
pcidssReq-8.1.8
os-srgSRG-OS-000029-GPOS-00010, SRG-OS-000031-GPOS-00012
stigidSLES-12-010080
pcidss48.2.8
stigrefSV-217109r646684_rule

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83010-9
  - CJIS-5.5.5
  - DISA-STIG-SLES-12-010080
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11(a)
  - NIST-800-53-AC-11.1 (ii)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_idle_delay
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy
- name: XCCDF Value inactivity_timeout_value # promote to variable
  set_fact:
    inactivity_timeout_value: !!str 900
  tags:
    - always

- name: Set GNOME3 Screensaver Inactivity Timeout
  ini_file:
    dest: /etc/dconf/db/local.d/00-security-settings
    section: org/gnome/desktop/session
    option: idle-delay
    value: uint32 {{ inactivity_timeout_value }}
    create: true
    no_extra_spaces: true
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83010-9
  - CJIS-5.5.5
  - DISA-STIG-SLES-12-010080
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11(a)
  - NIST-800-53-AC-11.1 (ii)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_idle_delay
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Dconf Update
  command: dconf update
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83010-9
  - CJIS-5.5.5
  - DISA-STIG-SLES-12-010080
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11(a)
  - NIST-800-53-AC-11.1 (ii)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_idle_delay
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

inactivity_timeout_value='900'


# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/desktop/session\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|local.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/local.d/00-security-settings"
DBDIR="/etc/dconf/db/local.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*idle-delay\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)idle-delay(\s*=)/#\1idle-delay\2/g" "${SETTINGSFILES[@]}"
    fi
fi

[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/desktop/session\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/desktop/session]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "uint32 ${inactivity_timeout_value}")"
if grep -q "^\\s*idle-delay\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*idle-delay\\s*=\\s*.*/idle-delay=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/desktop/session\\]|a\\idle-delay=${escaped_value}" "${DCONFFILE}"
fi
dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable GNOME3 Screensaver Lock After Idle Period   [ref]

To activate locking of the screensaver in the GNOME3 desktop when it is activated, run the following command to configure the SUSE operating system to allow the user to lock the GUI:
gsettings set org.gnome.desktop.lockdown disable-lock-screen false
Validate that disable-lock-screen has been set to false with the command:
gsettings get org.gnome.desktop.lockdown disable-lock-screen
Rationale:
A session lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not want to logout because of the temporary nature of the absense.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_lock_enabled
Identifiers:

CCE-83222-0

References:
cis-csc1, 12, 15, 16
cjis5.5.5
cobit5DSS05.04, DSS05.10, DSS06.10
cui3.1.10
disaCCI-000056, CCI-000058, CCI-000060
isa-62443-20094.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nistAC-11(b), AC-11(a), AC-11(1), AC-11(1).1, AC-11.1(iii), AC-11
nist-csfPR.AC-7
osppFMT_MOF_EXT.1
pcidssReq-8.1.8
os-srgSRG-OS-000028-GPOS-00009, SRG-OS-000030-GPOS-00011
stigidSLES-12-010060
pcidss48.2.8
stigrefSV-217107r603262_rule

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83222-0
  - CJIS-5.5.5
  - DISA-STIG-SLES-12-010060
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11
  - NIST-800-53-AC-11(1)
  - NIST-800-53-AC-11(1).1
  - NIST-800-53-AC-11(a)
  - NIST-800-53-AC-11(b)
  - NIST-800-53-AC-11.1(iii)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_lock_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Dconf Update
  command: dconf update
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_distribution == 'SLES'
  tags:
  - CCE-83222-0
  - CJIS-5.5.5
  - DISA-STIG-SLES-12-010060
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11
  - NIST-800-53-AC-11(1)
  - NIST-800-53-AC-11(1).1
  - NIST-800-53-AC-11(a)
  - NIST-800-53-AC-11(b)
  - NIST-800-53-AC-11.1(iii)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_lock_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Enable GNOME3 Screensaver Lock After Idle Period
  ini_file:
    dest: /etc/dconf/db/local.d/00-security-settings
    section: org/gnome/desktop/screensaver
    option: lock-enabled
    value: 'true'
    create: true
    no_extra_spaces: true
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_distribution != 'SLES'
  tags:
  - CCE-83222-0
  - CJIS-5.5.5
  - DISA-STIG-SLES-12-010060
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11
  - NIST-800-53-AC-11(1)
  - NIST-800-53-AC-11(1).1
  - NIST-800-53-AC-11(a)
  - NIST-800-53-AC-11(b)
  - NIST-800-53-AC-11.1(iii)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_lock_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Prevent user modification of GNOME lock-enabled
  lineinfile:
    path: /etc/dconf/db/local.d/locks/00-security-settings-lock
    regexp: ^/org/gnome/desktop/screensaver/lock-enabled$
    line: /org/gnome/desktop/screensaver/lock-enabled
    create: true
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_distribution != 'SLES'
  tags:
  - CCE-83222-0
  - CJIS-5.5.5
  - DISA-STIG-SLES-12-010060
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11
  - NIST-800-53-AC-11(1)
  - NIST-800-53-AC-11(1).1
  - NIST-800-53-AC-11(a)
  - NIST-800-53-AC-11(b)
  - NIST-800-53-AC-11.1(iii)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_lock_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Enable GNOME3 Screensaver Lock After Idle Period
  ini_file:
    dest: /etc/dconf/db/local.d/00-security-settings
    section: org/gnome/desktop/lockdown
    option: disable-lock-screen
    value: 'false'
    create: true
    no_extra_spaces: true
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_distribution == 'SLES'
  tags:
  - CCE-83222-0
  - CJIS-5.5.5
  - DISA-STIG-SLES-12-010060
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11
  - NIST-800-53-AC-11(1)
  - NIST-800-53-AC-11(1).1
  - NIST-800-53-AC-11(a)
  - NIST-800-53-AC-11(b)
  - NIST-800-53-AC-11.1(iii)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_lock_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Prevent user modification of GNOME disable-lock-screen
  lineinfile:
    path: /etc/dconf/db/local.d/locks/00-security-settings-lock
    regexp: ^/org/gnome/desktop/lockdown/disable-lock-screen$
    line: /org/gnome/desktop/lockdown/disable-lock-screen
    create: true
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_distribution == 'SLES'
  tags:
  - CCE-83222-0
  - CJIS-5.5.5
  - DISA-STIG-SLES-12-010060
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11
  - NIST-800-53-AC-11(1)
  - NIST-800-53-AC-11(1).1
  - NIST-800-53-AC-11(a)
  - NIST-800-53-AC-11(b)
  - NIST-800-53-AC-11.1(iii)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_lock_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Check GNOME3 screenserver disable-lock-screen false
  command: gsettings get org.gnome.desktop.lockdown disable-lock-screen
  register: cmd_out
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_distribution == 'SLES'
  tags:
  - CCE-83222-0
  - CJIS-5.5.5
  - DISA-STIG-SLES-12-010060
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11
  - NIST-800-53-AC-11(1)
  - NIST-800-53-AC-11(1).1
  - NIST-800-53-AC-11(a)
  - NIST-800-53-AC-11(b)
  - NIST-800-53-AC-11.1(iii)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_lock_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Update GNOME3 screenserver disable-lock-screen false
  command: gsettings set org.gnome.desktop.lockdown disable-lock-screen false
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_distribution == 'SLES'
  tags:
  - CCE-83222-0
  - CJIS-5.5.5
  - DISA-STIG-SLES-12-010060
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11
  - NIST-800-53-AC-11(1)
  - NIST-800-53-AC-11(1).1
  - NIST-800-53-AC-11(a)
  - NIST-800-53-AC-11(b)
  - NIST-800-53-AC-11.1(iii)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_lock_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Dconf Update
  command: dconf update
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83222-0
  - CJIS-5.5.5
  - DISA-STIG-SLES-12-010060
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11
  - NIST-800-53-AC-11(1)
  - NIST-800-53-AC-11(1).1
  - NIST-800-53-AC-11(a)
  - NIST-800-53-AC-11(b)
  - NIST-800-53-AC-11.1(iii)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_lock_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

gsettings set org.gnome.desktop.lockdown disable-lock-screen false
# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/desktop/lockdown\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|local.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/local.d/00-security-settings"
DBDIR="/etc/dconf/db/local.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*disable-lock-screen\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)disable-lock-screen(\s*=)/#\1disable-lock-screen\2/g" "${SETTINGSFILES[@]}"
    fi
fi

[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/desktop/lockdown\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/desktop/lockdown]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "false")"
if grep -q "^\\s*disable-lock-screen\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*disable-lock-screen\\s*=\\s*.*/disable-lock-screen=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/desktop/lockdown\\]|a\\disable-lock-screen=${escaped_value}" "${DCONFFILE}"
fi
dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/desktop/lockdown/disable-lock-screen$" "/etc/dconf/db/" \
            | grep -v 'distro\|ibus\|local.d' | grep ":" | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/local.d/locks"

mkdir -p "${LOCKSFOLDER}"

# Comment out the configurations in databases different from the target one
if [[ ! -z "${LOCKFILES}" ]]
then
    sed -i -E "s|^/org/gnome/desktop/lockdown/disable-lock-screen$|#&|" "${LOCKFILES[@]}"
fi

if ! grep -qr "^/org/gnome/desktop/lockdown/disable-lock-screen$" /etc/dconf/db/local.d/
then
    echo "/org/gnome/desktop/lockdown/disable-lock-screen" >> "/etc/dconf/db/local.d/locks/00-security-settings-lock"
fi
dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Implement Blank Screensaver   [ref]

On SUSE users should set the screensaver to use publicly viewable images or blank screen by doing the following: Find the Settings menu and then navigate to the Background selection section - Click "Applications" on the bottom left. - Hover over "System Tools" with the mouse. - Click the "Settings" icon under System Tools. - Click "Background" and then "Lock Screen". - Select image and set the Lock Screen image to the user's choice. - Click "Select". - Exit Settings Dialog. To set the screensaver mode in the GNOME3 desktop to a blank screen, add or set picture-uri to string '' in /etc/dconf/db/local.d/00-security-settings. For example:
[org/gnome/desktop/screensaver]
picture-uri=string ''
Once the settings have been added, add a lock to /etc/dconf/db/local.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/desktop/screensaver/picture-uri
After the settings have been set, run dconf update.
Rationale:
Setting the screensaver mode to blank-only conceals the contents of the display from passersby.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_mode_blank
Identifiers:

CCE-83221-2

References:
cis-csc1, 12, 15, 16
cjis5.5.5
cobit5DSS05.04, DSS05.10, DSS06.10
cui3.1.10
disaCCI-000060
isa-62443-20094.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nistAC-11(1), CM-6(a), AC-11(1).1
nist-csfPR.AC-7
osppFMT_MOF_EXT.1
pcidssReq-8.1.8
os-srgSRG-OS-000031-GPOS-00012
stigidSLES-12-010100
pcidss48.2.8
stigrefSV-217111r918489_rule

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83221-2
  - CJIS-5.5.5
  - DISA-STIG-SLES-12-010100
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11(1)
  - NIST-800-53-AC-11(1).1
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_mode_blank
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Implement Blank Screensaver
  ini_file:
    dest: /etc/dconf/db/local.d/00-security-settings
    section: org/gnome/desktop/screensaver
    option: picture-uri
    value: string ''
    create: true
    no_extra_spaces: true
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83221-2
  - CJIS-5.5.5
  - DISA-STIG-SLES-12-010100
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11(1)
  - NIST-800-53-AC-11(1).1
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_mode_blank
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Prevent user modification of GNOME picture-uri
  lineinfile:
    path: /etc/dconf/db/local.d/locks/00-security-settings-lock
    regexp: ^/org/gnome/desktop/screensaver/picture-uri$
    line: /org/gnome/desktop/screensaver/picture-uri
    create: true
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83221-2
  - CJIS-5.5.5
  - DISA-STIG-SLES-12-010100
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11(1)
  - NIST-800-53-AC-11(1).1
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_mode_blank
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Dconf Update
  command: dconf update
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83221-2
  - CJIS-5.5.5
  - DISA-STIG-SLES-12-010100
  - NIST-800-171-3.1.10
  - NIST-800-53-AC-11(1)
  - NIST-800-53-AC-11(1).1
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_screensaver_mode_blank
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/desktop/screensaver\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|local.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/local.d/00-security-settings"
DBDIR="/etc/dconf/db/local.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*picture-uri\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)picture-uri(\s*=)/#\1picture-uri\2/g" "${SETTINGSFILES[@]}"
    fi
fi

[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/desktop/screensaver\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/desktop/screensaver]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "string ''")"
if grep -q "^\\s*picture-uri\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*picture-uri\\s*=\\s*.*/picture-uri=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/desktop/screensaver\\]|a\\picture-uri=${escaped_value}" "${DCONFFILE}"
fi
dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/desktop/screensaver/picture-uri$" "/etc/dconf/db/" \
            | grep -v 'distro\|ibus\|local.d' | grep ":" | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/local.d/locks"

mkdir -p "${LOCKSFOLDER}"

# Comment out the configurations in databases different from the target one
if [[ ! -z "${LOCKFILES}" ]]
then
    sed -i -E "s|^/org/gnome/desktop/screensaver/picture-uri$|#&|" "${LOCKFILES[@]}"
fi

if ! grep -qr "^/org/gnome/desktop/screensaver/picture-uri$" /etc/dconf/db/local.d/
then
    echo "/org/gnome/desktop/screensaver/picture-uri" >> "/etc/dconf/db/local.d/locks/00-security-settings-lock"
fi
dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure Users Cannot Change GNOME3 Session Idle Settings   [ref]

If not already configured, ensure that users cannot change GNOME3 session idle settings by adding /org/gnome/desktop/session/idle-delay to /etc/dconf/db/local.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/desktop/session/idle-delay
After the settings have been set, run dconf update.
Rationale:
A session time-out lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not logout because of the temporary nature of the absence. Rather than relying on the user to manually lock their operating system session prior to vacating the vicinity, GNOME desktops can be configured to identify when a user's session has idled and take action to initiate the session lock. As such, users should not be allowed to change session settings.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_dconf_gnome_session_idle_user_locks
Identifiers:

CCE-91636-1

References:
cis-csc1, 12, 15, 16
cobit5DSS05.04, DSS05.10, DSS06.10
cui3.1.10
disaCCI-000057, CCI-000060
isa-62443-20094.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nistCM-6(a)
nist-csfPR.AC-7
osppFMT_MOF_EXT.1
pcidssReq-8.1.8
os-srgSRG-OS-000029-GPOS-00010, SRG-OS-000031-GPOS-00012
stigidSLES-12-010080
pcidss48.2.8
stigrefSV-217109r646684_rule

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91636-1
  - DISA-STIG-SLES-12-010080
  - NIST-800-171-3.1.10
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_session_idle_user_locks
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Prevent user modification of GNOME Session idle-delay
  lineinfile:
    path: /etc/dconf/db/local.d/locks/00-security-settings-lock
    regexp: ^/org/gnome/desktop/session/idle-delay$
    line: /org/gnome/desktop/session/idle-delay
    create: true
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91636-1
  - DISA-STIG-SLES-12-010080
  - NIST-800-171-3.1.10
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_session_idle_user_locks
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Dconf Update
  command: dconf update
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91636-1
  - DISA-STIG-SLES-12-010080
  - NIST-800-171-3.1.10
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - dconf_gnome_session_idle_user_locks
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/desktop/session/idle-delay$" "/etc/dconf/db/" \
            | grep -v 'distro\|ibus\|local.d' | grep ":" | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/local.d/locks"

mkdir -p "${LOCKSFOLDER}"

# Comment out the configurations in databases different from the target one
if [[ ! -z "${LOCKFILES}" ]]
then
    sed -i -E "s|^/org/gnome/desktop/session/idle-delay$|#&|" "${LOCKFILES[@]}"
fi

if ! grep -qr "^/org/gnome/desktop/session/idle-delay$" /etc/dconf/db/local.d/
then
    echo "/org/gnome/desktop/session/idle-delay" >> "/etc/dconf/db/local.d/locks/00-security-settings-lock"
fi
dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Make sure that the dconf databases are up-to-date with regards to respective keyfiles   [ref]

By default, DConf uses a binary database as a data backend. The system-level database is compiled from keyfiles in the /etc/dconf/db/ directory by the
dconf update
command. More specifically, content present in the following directories:
/etc/dconf/db/gdm.d
/etc/dconf/db/local.d
Rationale:
Unlike text-based keyfiles, the binary database is impossible to check by OVAL. Therefore, in order to evaluate dconf configuration, both have to be true at the same time - configuration files have to be compliant, and the database needs to be more recent than those keyfiles, which gives confidence that it reflects them.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_dconf_db_up_to_date
Identifiers:

CCE-83182-6

References:
hipaa164.308(a)(1)(ii)(B), 164.308(a)(5)(ii)(A)
pcidssReq-6.2
os-srgSRG-OS-000480-GPOS-00227
stigidSLES-12-010040
cis1.10
pcidss48.2.8
stigrefSV-217105r646678_rule

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83182-6
  - DISA-STIG-SLES-12-010040
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-8.2.8
  - dconf_db_up_to_date
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed
  - unknown_strategy

- name: Run dconf update
  ansible.builtin.command:
    cmd: dconf update
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83182-6
  - DISA-STIG-SLES-12-010040
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-8.2.8
  - dconf_db_up_to_date
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed
  - unknown_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Updating Software   Group contains 4 rules
[ref]   The zypper command line tool is used to install and update software packages. The system also provides a graphical software update tool in the System menu, in the Administration submenu, called Software Update.

SUSE Linux Enterprise 12 systems contain an installed software catalog called the RPM database, which records metadata of installed packages. Consistently using zypper or the graphical Software Update for all software installation allows for insight into the current inventory of installed software on the system.

Rule   Ensure gpgcheck Enabled In Main zypper Configuration   [ref]

The gpgcheck option controls whether RPM packages' signatures are always checked prior to installation. To configure zypper to check package signatures before installing them, ensure the following line appears in /etc/zypp/zypp.conf in the [main] section:
gpgcheck=1
Rationale:
Changes to any software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor.
Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA).
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_gpgcheck_globally_activated
Identifiers:

CCE-83068-7

References:
cis-csc11, 2, 3, 9
cjis5.10.4.1
cobit5APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02
cui3.4.8
disaCCI-001749
hipaa164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i)
isa-62443-20094.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6
iso27001-2013A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4
nistCM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), SA-12, SA-12(10), CM-11(a), CM-11(b)
nist-csfPR.DS-6, PR.DS-8, PR.IP-1
osppFPT_TUD_EXT.1, FPT_TUD_EXT.2
pcidssReq-6.2
os-srgSRG-OS-000366-GPOS-00153
stigidSLES-12-010550
cis1.2.3
anssiR59
pcidss46.3.3
stigrefSV-217153r877463_rule

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83068-7
  - CJIS-5.10.4.1
  - DISA-STIG-SLES-12-010550
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - configure_strategy
  - ensure_gpgcheck_globally_activated
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed

- name: Ensure GPG check is globally activated
  ini_file:
    dest: /etc/zypp/zypp.conf
    section: main
    option: gpgcheck
    value: 1
    no_extra_spaces: true
    create: false
  when: '"zypper" in ansible_facts.packages'
  tags:
  - CCE-83068-7
  - CJIS-5.10.4.1
  - DISA-STIG-SLES-12-010550
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - configure_strategy
  - ensure_gpgcheck_globally_activated
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed

# Remediation is applicable only in certain platforms
if rpm --quiet -q zypper; then

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^gpgcheck")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^gpgcheck\\>" "/etc/zypp/zypp.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^gpgcheck\\>.*/$escaped_formatted_output/gi" "/etc/zypp/zypp.conf"
else
    if [[ -s "/etc/zypp/zypp.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/zypp/zypp.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/zypp/zypp.conf"
    fi
    cce="CCE-83068-7"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/zypp/zypp.conf" >> "/etc/zypp/zypp.conf"
    printf '%s\n' "$formatted_output" >> "/etc/zypp/zypp.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure gpgcheck Enabled for All zypper Package Repositories   [ref]

To ensure signature checking is not disabled for any repos, remove any lines from files in /etc/yum.repos.d of the form:
gpgcheck=0
Rationale:
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA)."
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_gpgcheck_never_disabled
Identifiers:

CCE-83258-4

References:
cis-csc11, 2, 3, 9
cjis5.10.4.1
cobit5APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02
cui3.4.8
disaCCI-001749
hipaa164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i)
isa-62443-20094.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6
iso27001-2013A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4
nistCM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), SA-12, SA-12(10), CM-11(a), CM-11(b)
nist-csfPR.DS-6, PR.DS-8, PR.IP-1
osppFPT_TUD_EXT.1, FPT_TUD_EXT.2
pcidssReq-6.2
os-srgSRG-OS-000366-GPOS-00153
cis1.2.3
anssiR59
pcidss46.3.3

Complexity:low
Disruption:medium
Reboot:false
Strategy:enable
- name: Grep for zypper repo section names
  shell: |
    set -o pipefail
    grep -HEr '^\[.+\]' -r /etc/zypp/repos.d/
  register: repo_grep_results
  failed_when: repo_grep_results.rc not in [0, 1]
  changed_when: false
  tags:
  - CCE-83258-4
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - enable_strategy
  - ensure_gpgcheck_never_disabled
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed

- name: Set gpgcheck=1 for each zypper repo
  ini_file:
    path: '{{ item[0] }}'
    section: '{{ item[1] }}'
    option: gpgcheck
    value: '1'
    no_extra_spaces: true
  loop: '{{ repo_grep_results.stdout |regex_findall( ''(.+\.repo):\[(.+)\]\n?'' )
    if repo_grep_results is not skipped else [] }}'
  when: repo_grep_results is not skipped
  tags:
  - CCE-83258-4
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - enable_strategy
  - ensure_gpgcheck_never_disabled
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed


sed -i 's/gpgcheck\s*=.*/gpgcheck=1/g' /etc/zypp/repos.d/*

Rule   Ensure SUSE GPG Key Installed   [ref]

To ensure the system can cryptographically verify base software packages come from SUSE (and to connect to the SUSE to receive them), the SUSE GPG key must properly be installed. To install the SUSE GPG key, run:
$ sudo zypper install suse-build-key
If the system is not connected to the Internet or an RHN Satellite, then install the SUSE GPG key from trusted media such as the SUSE installation CD-ROM or DVD. Assuming the disc is mounted in /media/cdrom, use the following command as the root user to import it into the keyring:
$ sudo rpm --import /media/cdrom/content.key
or
$ sudo rpm --import /media/cdrom/repodata/repomd.xml.key
Alternatively, the key may be pre-loaded during the SUSE installation. In such cases, one can use the repository cache files to install the key, for example by running the following command:
sudo rpm --import /var/cache/zypp/raw/Basesystem_Module_15_SP2_x86_64:SLE-Module-Basesystem15-SP2-Pool/repodata/repomd.xml.key
Rationale:
Changes to software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor. The SUSE GPG key is necessary to cryptographically verify packages are from SUSE.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_suse_gpgkey_installed
Identifiers:

CCE-91482-0

References:
cis-csc11, 2, 3, 9
cjis5.10.4.1
cobit5APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02
cui3.4.8
disaCCI-001749
hipaa164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i)
isa-62443-20094.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6
iso27001-2013A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4
nerc-cipCIP-003-8 R4.2, CIP-003-8 R6, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nistCM-5(3), SI-7, SC-12, SC-12(3), CM-6(a)
nist-csfPR.DS-6, PR.DS-8, PR.IP-1
osppFPT_TUD_EXT.1, FPT_TUD_EXT.2
pcidssReq-6.2
os-srgSRG-OS-000366-GPOS-00153
pcidss46.3.3

Complexity:medium
Disruption:medium
Reboot:false
Strategy:restrict
- name: Read permission of GPG key directory
  stat:
    path: /usr/lib/rpm/gnupg/keys
  register: suse_gpg_key_directory_permission
  check_mode: false
  tags:
  - CCE-91482-0
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - ensure_suse_gpgkey_installed
  - high_severity
  - medium_complexity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy

- name: Set Valid fingerprint
  set_fact:
    suse_gpg_valid_fingerprints: ''
  tags:
  - CCE-91482-0
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - ensure_suse_gpgkey_installed
  - high_severity
  - medium_complexity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy

- name: Read signatures in GPG key
  shell: |-
    set -o pipefail
    gpg --with-fingerprint --with-colons "{{ item }}" | grep -A1 "^pub" | grep "^fpr" | cut -d ":" -f 10
  changed_when: false
  register: suse_gpg_fingerprints
  check_mode: false
  with_fileglob: /usr/lib/rpm/gnupg/keys/*.asc
  tags:
  - CCE-91482-0
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - ensure_suse_gpgkey_installed
  - high_severity
  - medium_complexity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy

- name: Import SUSE GPG key
  rpm_key:
    state: present
    key: '{{ item.item }}'
  when:
  - suse_gpg_key_directory_permission.stat.mode <= '0755'
  - item.stdout == suse_gpg_valid_fingerprints
  - suse_gpg_fingerprints | length > 0
  with_items: '{{ suse_gpg_fingerprints.results }}'
  tags:
  - CCE-91482-0
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - ensure_suse_gpgkey_installed
  - high_severity
  - medium_complexity
  - medium_disruption
  - no_reboot_needed
  - restrict_strategy

# The fingerprint below is retrieved from https://www.suse.com/support/security/keys/
readonly SUSE_RELEASE_FINGERPRINT=""


# Location of the key we would like to import (once it's integrity verified)
readonly SUSE_RELEASE_KEY_PATTERN="/usr/lib/rpm/gnupg/keys/*.asc"

RPM_GPG_DIR_PERMS=$(stat -c %a /usr/lib/rpm/gnupg/keys)

# Verify keys directory permissions are safe
if [ "${RPM_GPG_DIR_PERMS}" -le "755" ]
then

  for KEYFILE in $SUSE_RELEASE_KEY_PATTERN; do
  # If they are safe, try to obtain fingerprints from the key file
  # (to ensure there won't be e.g. CRC error).
      readarray -t GPG_OUT < <(gpg --with-fingerprint --with-colons "$KEYFILE" | grep -A1 "^pub" | grep "^fpr" | cut -d ":" -f 10)
      GPG_RESULT=$?
      # No CRC error, safe to proceed
      if [ "${GPG_RESULT}" -eq "0" ]
      then
          echo "${GPG_OUT[*]}" | grep -vE "${SUSE_RELEASE_FINGERPRINT}" || {
              # In this rule we care on of release build key so we will skip possible keys for backports, etc
              rpm --import "${KEYFILE}"
              break;
          }
      fi
  done
fi

Rule   Ensure Software Patches Installed   [ref]

If the system is configured for online updates, invoking the following command will list available security updates:
$ sudo zypper refresh && sudo zypper list-patches -g security


NOTE: U.S. Defense systems are required to be patched within 30 days or sooner as local policy dictates.
Warning:  The OVAL feed of SUSE Linux Enterprise 12 is not a XML file, which may not be understood by all scanners.
Rationale:
Installing software updates is a fundamental mitigation against the exploitation of publicly-known vulnerabilities. If the most recent security patches and updates are not installed, unauthorized users may take advantage of weaknesses in the unpatched software. The lack of prompt attention to patching could result in a system compromise.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_security_patches_up_to_date
Identifiers:

CCE-83002-6

References:
cis-csc18, 20, 4
cjis5.10.4.1
cobit5APO12.01, APO12.02, APO12.03, APO12.04, BAI03.10, DSS05.01, DSS05.02
disaCCI-000366, CCI-001227
isa-62443-20094.2.3, 4.2.3.12, 4.2.3.7, 4.2.3.9
iso27001-2013A.12.6.1, A.14.2.3, A.16.1.3, A.18.2.2, A.18.2.3
nistSI-2(5), SI-2(c), CM-6(a)
nist-csfID.RA-1, PR.IP-12
osppFMT_MOF_EXT.1
pcidssReq-6.2
os-srgSRG-OS-000480-GPOS-00227
stigidSLES-12-010010
cis1.9
anssiR61
pcidss46.3.3
stigrefSV-217102r603262_rule

Complexity:low
Disruption:high
Reboot:true
Strategy:patch
- name: Security patches are up to date
  package:
    name: '*'
    state: latest
  tags:
  - CCE-83002-6
  - CJIS-5.10.4.1
  - DISA-STIG-SLES-12-010010
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-2(5)
  - NIST-800-53-SI-2(c)
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - high_disruption
  - low_complexity
  - medium_severity
  - patch_strategy
  - reboot_required
  - security_patches_up_to_date
  - skip_ansible_lint

Complexity:low
Disruption:high
Reboot:true
Strategy:patch


zypper patch -g security -y
Group   Account and Access Control   Group contains 11 groups and 23 rules
[ref]   In traditional Unix security, if an attacker gains shell access to a certain login account, they can perform any action or access any file to which that account has access. Therefore, making it more difficult for unauthorized people to gain shell access to accounts, particularly to privileged accounts, is a necessary part of securing a system. This section introduces mechanisms for restricting access to accounts under SUSE Linux Enterprise 12.
Group   Protect Accounts by Configuring PAM   Group contains 2 groups and 8 rules
[ref]   PAM, or Pluggable Authentication Modules, is a system which implements modular authentication for Linux programs. PAM provides a flexible and configurable architecture for authentication, and it should be configured to minimize exposure to unnecessary risk. This section contains guidance on how to accomplish that.

PAM is implemented as a set of shared objects which are loaded and invoked whenever an application wishes to authenticate a user. Typically, the application must be running as root in order to take advantage of PAM, because PAM's modules often need to be able to access sensitive stores of account information, such as /etc/shadow. Traditional privileged network listeners (e.g. sshd) or SUID programs (e.g. sudo) already meet this requirement. An SUID root application, userhelper, is provided so that programs which are not SUID or privileged themselves can still take advantage of PAM.

PAM looks in the directory /etc/pam.d for application-specific configuration information. For instance, if the program login attempts to authenticate a user, then PAM's libraries follow the instructions in the file /etc/pam.d/login to determine what actions should be taken.

One very important file in /etc/pam.d is /etc/pam.d/system-auth. This file, which is included by many other PAM configuration files, defines 'default' system authentication measures. Modifying this file is a good way to make far-reaching authentication changes, for instance when implementing a centralized authentication service.
Warning:  Be careful when making changes to PAM's configuration files. The syntax for these files is complex, and modifications can have unexpected consequences. The default configurations shipped with applications should be sufficient for most users.
Warning:  Running authconfig or system-config-authentication will re-write the PAM configuration files, destroying any manually made changes and replacing them with a series of system defaults. One reference to the configuration file syntax can be found at https://fossies.org/linux/Linux-PAM-docs/doc/sag/Linux-PAM_SAG.pdf.
Group   Set Lockouts for Failed Password Attempts   Group contains 3 rules
[ref]   The pam_faillock PAM module provides the capability to lock out user accounts after a number of failed login attempts. Its documentation is available in /usr/share/doc/pam-VERSION/txts/README.pam_faillock.

Warning:  Locking out user accounts presents the risk of a denial-of-service attack. The lockout policy must weigh whether the risk of such a denial-of-service attack outweighs the benefits of thwarting password guessing attacks.

Rule   Limit Password Reuse   [ref]

Do not allow users to reuse recent passwords. This can be accomplished by using the remember option for the pam_unix or pam_pwhistory PAM modules.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report.
Warning:  Newer versions of authselect contain an authselect feature to easily and properly enable pam_pwhistory.so module. If this feature is not yet available in your system, an authselect custom profile must be used to avoid integrity issues in PAM files.
Rationale:
Preventing re-use of previous passwords helps ensure that a compromised password is not re-used by a user.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_remember
Identifiers:

CCE-92217-9

References:
cis-csc1, 12, 15, 16, 5
cjis5.6.2.1.1
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui3.5.8
disaCCI-000200
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(f), IA-5(1)(e)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
pcidssReq-8.2.5
os-srgSRG-OS-000077-GPOS-00045
anssiR31
pcidss48.3.7

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92217-9
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
- name: XCCDF Value var_password_pam_unix_remember # promote to variable
  set_fact:
    var_password_pam_unix_remember: !!str 4
  tags:
    - always

- name: Limit Password Reuse - Check if system relies on authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-92217-9
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Limit Password Reuse - Collect the available authselect features
  ansible.builtin.command:
    cmd: authselect list-features sssd
  register: result_authselect_available_features
  changed_when: false
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CCE-92217-9
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Limit Password Reuse - Enable pam_pwhistory.so using authselect feature
  block:

  - name: Limit Password Reuse - Check integrity of authselect current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Limit Password Reuse - Informative message based on the authselect integrity
      check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Limit Password Reuse - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Limit Password Reuse - Ensure "with-pwhistory" feature is enabled using
      authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-pwhistory
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-pwhistory")

  - name: Limit Password Reuse - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  - result_authselect_available_features.stdout is search("with-pwhistory")
  tags:
  - CCE-92217-9
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Limit Password Reuse - Enable pam_pwhistory.so in appropriate PAM files
  block:

  - name: Limit Password Reuse - Define the PAM file to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/common-password

  - name: Limit Password Reuse - Check if system relies on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Limit Password Reuse - Ensure authselect custom profile is used if authselect
      is present
    block:

    - name: Limit Password Reuse - Check integrity of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Limit Password Reuse - Informative message based on the authselect integrity
        check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Limit Password Reuse - Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Limit Password Reuse - Define the current authselect profile as a local
        fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Limit Password Reuse - Define the new authselect custom profile as a local
        fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Limit Password Reuse - Get authselect current features to also enable
        them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Limit Password Reuse - Check if any custom profile with the same name
        was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Limit Password Reuse - Create an authselect custom profile based on the
        current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Limit Password Reuse - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Limit Password Reuse - Ensure the authselect custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Limit Password Reuse - Restore the authselect features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Limit Password Reuse - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Limit Password Reuse - Change the PAM file to be edited according to the
        custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Limit Password Reuse - Define a fact for control already filtered in case
      filters are used
    ansible.builtin.set_fact:
      pam_module_control: requisite

  - name: Limit Password Reuse - Check if expected PAM module line is present in {{
      pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ pam_module_control | regex_escape() }}\s+pam_pwhistory.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: Limit Password Reuse - Include or update the PAM module line in {{ pam_file_path
      }}
    block:

    - name: Limit Password Reuse - Check if required PAM module line is present in
        {{ pam_file_path }} with different control
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: Limit Password Reuse - Ensure the correct control for the required PAM
        module line in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
        replace: \1{{ pam_module_control }} \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: Limit Password Reuse - Ensure the required PAM module line is included
        in {{ pam_file_path }}
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        insertafter: ^password.*requisite.*pam_pwquality\.so
        line: password    {{ pam_module_control }}    pam_pwhistory.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: Limit Password Reuse - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - |
    (result_authselect_available_features.stdout is defined and result_authselect_available_features.stdout is not search("with-pwhistory")) or result_authselect_available_features is not defined
  tags:
  - CCE-92217-9
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Limit Password Reuse - Check the presence of /etc/security/pwhistory.conf
    file
  ansible.builtin.stat:
    path: /etc/security/pwhistory.conf
  register: result_pwhistory_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-92217-9
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Limit Password Reuse - pam_pwhistory.so parameters are configured in /etc/security/pwhistory.conf
    file
  block:

  - name: Limit Password Reuse - Ensure the pam_pwhistory.so remember parameter in
      /etc/security/pwhistory.conf
    ansible.builtin.lineinfile:
      path: /etc/security/pwhistory.conf
      regexp: ^\s*remember\s*=
      line: remember = {{ var_password_pam_unix_remember }}
      state: present

  - name: Limit Password Reuse - Ensure the pam_pwhistory.so remember parameter is
      removed from PAM files
    block:

    - name: Limit Password Reuse - Check if /etc/pam.d/common-password file is present
      ansible.builtin.stat:
        path: /etc/pam.d/common-password
      register: result_pam_file_present

    - name: Limit Password Reuse - Check the proper remediation for the system
      block:

      - name: Limit Password Reuse - Define the PAM file to be edited as a local fact
        ansible.builtin.set_fact:
          pam_file_path: /etc/pam.d/common-password

      - name: Limit Password Reuse - Check if system relies on authselect tool
        ansible.builtin.stat:
          path: /usr/bin/authselect
        register: result_authselect_present

      - name: Limit Password Reuse - Ensure authselect custom profile is used if authselect
          is present
        block:

        - name: Limit Password Reuse - Check integrity of authselect current profile
          ansible.builtin.command:
            cmd: authselect check
          register: result_authselect_check_cmd
          changed_when: false
          failed_when: false

        - name: Limit Password Reuse - Informative message based on the authselect
            integrity check result
          ansible.builtin.assert:
            that:
            - result_authselect_check_cmd.rc == 0
            fail_msg:
            - authselect integrity check failed. Remediation aborted!
            - This remediation could not be applied because an authselect profile
              was not selected or the selected profile is not intact.
            - It is not recommended to manually edit the PAM files when authselect
              tool is available.
            - In cases where the default authselect profile does not cover a specific
              demand, a custom authselect profile is recommended.
            success_msg:
            - authselect integrity check passed

        - name: Limit Password Reuse - Get authselect current profile
          ansible.builtin.shell:
            cmd: authselect current -r | awk '{ print $1 }'
          register: result_authselect_profile
          changed_when: false
          when:
          - result_authselect_check_cmd is success

        - name: Limit Password Reuse - Define the current authselect profile as a
            local fact
          ansible.builtin.set_fact:
            authselect_current_profile: '{{ result_authselect_profile.stdout }}'
            authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
          when:
          - result_authselect_profile is not skipped
          - result_authselect_profile.stdout is match("custom/")

        - name: Limit Password Reuse - Define the new authselect custom profile as
            a local fact
          ansible.builtin.set_fact:
            authselect_current_profile: '{{ result_authselect_profile.stdout }}'
            authselect_custom_profile: custom/hardening
          when:
          - result_authselect_profile is not skipped
          - result_authselect_profile.stdout is not match("custom/")

        - name: Limit Password Reuse - Get authselect current features to also enable
            them in the custom profile
          ansible.builtin.shell:
            cmd: authselect current | tail -n+3 | awk '{ print $2 }'
          register: result_authselect_features
          changed_when: false
          when:
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")

        - name: Limit Password Reuse - Check if any custom profile with the same name
            was already created
          ansible.builtin.stat:
            path: /etc/authselect/{{ authselect_custom_profile }}
          register: result_authselect_custom_profile_present
          changed_when: false
          when:
          - authselect_current_profile is not match("custom/")

        - name: Limit Password Reuse - Create an authselect custom profile based on
            the current profile
          ansible.builtin.command:
            cmd: authselect create-profile hardening -b {{ authselect_current_profile
              }}
          when:
          - result_authselect_check_cmd is success
          - authselect_current_profile is not match("custom/")
          - not result_authselect_custom_profile_present.stat.exists

        - name: Limit Password Reuse - Ensure authselect changes are applied
          ansible.builtin.command:
            cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")
          - authselect_custom_profile is not match(authselect_current_profile)

        - name: Limit Password Reuse - Ensure the authselect custom profile is selected
          ansible.builtin.command:
            cmd: authselect select {{ authselect_custom_profile }}
          register: result_pam_authselect_select_profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")
          - authselect_custom_profile is not match(authselect_current_profile)

        - name: Limit Password Reuse - Restore the authselect features in the custom
            profile
          ansible.builtin.command:
            cmd: authselect enable-feature {{ item }}
          loop: '{{ result_authselect_features.stdout_lines }}'
          register: result_pam_authselect_restore_features
          when:
          - result_authselect_profile is not skipped
          - result_authselect_features is not skipped
          - result_pam_authselect_select_profile is not skipped

        - name: Limit Password Reuse - Ensure authselect changes are applied
          ansible.builtin.command:
            cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - result_pam_authselect_restore_features is not skipped

        - name: Limit Password Reuse - Change the PAM file to be edited according
            to the custom authselect profile
          ansible.builtin.set_fact:
            pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
              | basename }}
        when:
        - result_authselect_present.stat.exists

      - name: Limit Password Reuse - Define a fact for control already filtered in
          case filters are used
        ansible.builtin.set_fact:
          pam_module_control: ''

      - name: Limit Password Reuse - Ensure the "remember" option from "pam_pwhistory.so"
          is not present in {{ pam_file_path }}
        ansible.builtin.replace:
          dest: '{{ pam_file_path }}'
          regexp: (.*password.*pam_pwhistory.so.*)\bremember\b=?[0-9a-zA-Z]*(.*)
          replace: \1\2
        register: result_pam_option_removal

      - name: Limit Password Reuse - Ensure authselect changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b
        when:
        - result_authselect_present.stat.exists
        - result_pam_option_removal is changed
      when:
      - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_pwhistory_conf_check.stat.exists
  tags:
  - CCE-92217-9
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Limit Password Reuse - pam_pwhistory.so parameters are configured in PAM files
  block:

  - name: Limit Password Reuse - Define the PAM file to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/common-password

  - name: Limit Password Reuse - Check if system relies on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Limit Password Reuse - Ensure authselect custom profile is used if authselect
      is present
    block:

    - name: Limit Password Reuse - Check integrity of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Limit Password Reuse - Informative message based on the authselect integrity
        check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Limit Password Reuse - Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Limit Password Reuse - Define the current authselect profile as a local
        fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Limit Password Reuse - Define the new authselect custom profile as a local
        fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Limit Password Reuse - Get authselect current features to also enable
        them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Limit Password Reuse - Check if any custom profile with the same name
        was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Limit Password Reuse - Create an authselect custom profile based on the
        current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Limit Password Reuse - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Limit Password Reuse - Ensure the authselect custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Limit Password Reuse - Restore the authselect features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Limit Password Reuse - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Limit Password Reuse - Change the PAM file to be edited according to the
        custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Limit Password Reuse - Define a fact for control already filtered in case
      filters are used
    ansible.builtin.set_fact:
      pam_module_control: requisite

  - name: Limit Password Reuse - Check if expected PAM module line is present in {{
      pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ pam_module_control | regex_escape() }}\s+pam_pwhistory.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: Limit Password Reuse - Include or update the PAM module line in {{ pam_file_path
      }}
    block:

    - name: Limit Password Reuse - Check if required PAM module line is present in
        {{ pam_file_path }} with different control
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: Limit Password Reuse - Ensure the correct control for the required PAM
        module line in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
        replace: \1{{ pam_module_control }} \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: Limit Password Reuse - Ensure the required PAM module line is included
        in {{ pam_file_path }}
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        line: password    {{ pam_module_control }}    pam_pwhistory.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: Limit Password Reuse - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0

  - name: Limit Password Reuse - Define a fact for control already filtered in case
      filters are used
    ansible.builtin.set_fact:
      pam_module_control: requisite

  - name: Limit Password Reuse - Check if the required PAM module option is present
      in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ pam_module_control | regex_escape() }}\s+pam_pwhistory.so\s*.*\sremember\b
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_module_accounts_password_pam_unix_remember_option_present

  - name: Limit Password Reuse - Ensure the "remember" PAM option for "pam_pwhistory.so"
      is included in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+{{ pam_module_control | regex_escape() }}\s+pam_pwhistory.so.*)
      line: \1 remember={{ var_password_pam_unix_remember }}
      state: present
    register: result_pam_accounts_password_pam_unix_remember_add
    when:
    - result_pam_module_accounts_password_pam_unix_remember_option_present.found ==
      0

  - name: Limit Password Reuse - Ensure the required value for "remember" PAM option
      from "pam_pwhistory.so" in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+{{ pam_module_control | regex_escape() }}\s+pam_pwhistory.so\s+.*)(remember)=[0-9a-zA-Z]+\s*(.*)
      line: \1\2={{ var_password_pam_unix_remember }} \3
    register: result_pam_accounts_password_pam_unix_remember_edit
    when:
    - result_pam_module_accounts_password_pam_unix_remember_option_present.found >
      0

  - name: Limit Password Reuse - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - (result_pam_remember_add is defined and result_pam_remember_add.changed) or
      (result_pam_remember_edit is defined and result_pam_remember_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - not result_pwhistory_conf_check.stat.exists
  tags:
  - CCE-92217-9
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_unix_remember='4'






if [ -f /usr/bin/authselect ]; then
    if authselect list-features sssd | grep -q with-pwhistory; then
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi
        authselect enable-feature with-pwhistory

        authselect apply-changes -b
    else
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/common-password")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
        if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*" "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1requisite \2/" "$PAM_FILE_PATH"
            else
                LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                if [ ! -z $LAST_MATCH_LINE ]; then
                    sed -i --follow-symlinks $LAST_MATCH_LINE" a password     requisite    pam_pwhistory.so" "$PAM_FILE_PATH"
                else
                    echo "password    requisite    pam_pwhistory.so" >> "$PAM_FILE_PATH"
                fi
            fi
        fi
    fi
else
    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*" "/etc/pam.d/common-password"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "/etc/pam.d/common-password")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1requisite \2/" "/etc/pam.d/common-password"
        else
            LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "/etc/pam.d/common-password" | tail -n 1 | cut -d: -f 1)
            if [ ! -z $LAST_MATCH_LINE ]; then
                sed -i --follow-symlinks $LAST_MATCH_LINE" a password     requisite    pam_pwhistory.so" "/etc/pam.d/common-password"
            else
                echo "password    requisite    pam_pwhistory.so" >> "/etc/pam.d/common-password"
            fi
        fi
    fi
fi

PWHISTORY_CONF="/etc/security/pwhistory.conf"
if [ -f $PWHISTORY_CONF ]; then
    regex="^\s*remember\s*="
    line="remember = $var_password_pam_unix_remember"
    if ! grep -q $regex $PWHISTORY_CONF; then
        echo $line >> $PWHISTORY_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(remember\s*=\s*\)\(\S\+\)|\1'"$var_password_pam_unix_remember"'|g' $PWHISTORY_CONF
    fi
    if [ -e "/etc/pam.d/common-password" ] ; then
        PAM_FILE_PATH="/etc/pam.d/common-password"
        if [ -f /usr/bin/authselect ]; then
            
            if ! authselect check; then
            echo "
            authselect integrity check failed. Remediation aborted!
            This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
            It is not recommended to manually edit the PAM files when authselect tool is available.
            In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
            exit 1
            fi

            CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
            # If not already in use, a custom profile is created preserving the enabled features.
            if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                authselect create-profile hardening -b $CURRENT_PROFILE
                CURRENT_PROFILE="custom/hardening"
                
                authselect apply-changes -b --backup=before-hardening-custom-profile
                authselect select $CURRENT_PROFILE
                for feature in $ENABLED_FEATURES; do
                    authselect enable-feature $feature;
                done
                
                authselect apply-changes -b --backup=after-hardening-custom-profile
            fi
            PAM_FILE_NAME=$(basename "/etc/pam.d/common-password")
            PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

            authselect apply-changes -b
        fi
        
    if grep -qP "^\s*password\s.*\bpam_pwhistory.so\s.*\bremember\b" "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks "s/(.*password.*pam_pwhistory.so.*)\bremember\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
    fi
        if [ -f /usr/bin/authselect ]; then
            
            authselect apply-changes -b
        fi
    else
        echo "/etc/pam.d/common-password was not found" >&2
    fi
else
    PAM_FILE_PATH="/etc/pam.d/common-password"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/common-password")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*" "$PAM_FILE_PATH"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1requisite \2/" "$PAM_FILE_PATH"
        else
            echo "password    requisite    pam_pwhistory.so" >> "$PAM_FILE_PATH"
        fi
    fi
    # Check the option
    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*\sremember\b" "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks "/\s*password\s+requisite\s+pam_pwhistory.so.*/ s/$/ remember=$var_password_pam_unix_remember/" "$PAM_FILE_PATH"
    else
        sed -i -E --follow-symlinks "s/(\s*password\s+requisite\s+pam_pwhistory.so\s+.*)(remember=)[[:alnum:]]+\s*(.*)/\1\2$var_password_pam_unix_remember \3/" "$PAM_FILE_PATH"
    fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set Deny For Failed Password Attempts   [ref]

The SUSE Linux Enterprise 12 operating system must lock an account after - at most - 3 consecutive invalid access attempts.
Rationale:
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, otherwise known as brute-force attacks, is reduced. Limits are imposed by locking the account. To configure the operating system to lock an account after three unsuccessful consecutive access attempts using pam_tally2.so, modify the content of both /etc/pam.d/login and /etc/pam.d/common-account as follows:

  • add or modify the pam_tally2.so module line in /etc/pam.d/login to ensure both onerr=fail and deny=3 are present. For example:
    auth required pam_tally2.so onerr=fail silent audit deny=3
               
  • add or modify the following line in /etc/pam.d/common-account:
    account required pam_tally2.so
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_tally2
Identifiers:

CCE-83055-4

References:
disaCCI-000044
nistAC-7(a)
pcidssReq-8.1.6
os-srgSRG-OS-000021-GPOS-00005
stigidSLES-12-010130
cis5.3.2
anssiR31
pcidss48.3.4
stigrefSV-217114r603262_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
- name: XCCDF Value var_password_pam_tally2 # promote to variable
  set_fact:
    var_password_pam_tally2: !!str 3
  tags:
    - always

- name: Set Deny For Failed Password Attempts - Define a fact for control already
    filtered in case filters are used
  ansible.builtin.set_fact:
    pam_module_control: required
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Check if expected PAM module line
    is present in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    regexp: ^\s*auth\s+{{ pam_module_control | regex_escape() }}\s+pam_tally2.so\s*.*
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_line_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Include or update the PAM module line
    in /etc/pam.d/login
  block:

  - name: Set Deny For Failed Password Attempts - Check if required PAM module line
      is present in /etc/pam.d/login with different control
    ansible.builtin.lineinfile:
      path: /etc/pam.d/login
      regexp: ^\s*auth\s+.*\s+pam_tally2.so\s*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_other_control_present

  - name: Set Deny For Failed Password Attempts - Ensure the correct control for the
      required PAM module line in /etc/pam.d/login
    ansible.builtin.replace:
      dest: /etc/pam.d/login
      regexp: ^(\s*auth\s+).*(\bpam_tally2.so.*)
      replace: \1{{ pam_module_control }} \2
    register: result_pam_module_edit
    when:
    - result_pam_line_other_control_present.found == 1

  - name: Set Deny For Failed Password Attempts - Ensure the required PAM module line
      is included in /etc/pam.d/login
    ansible.builtin.lineinfile:
      dest: /etc/pam.d/login
      line: auth    {{ pam_module_control }}    pam_tally2.so
    register: result_pam_module_add
    when:
    - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
      > 1

  - name: Set Deny For Failed Password Attempts - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present is defined
    - result_authselect_present.stat.exists
    - |-
      (result_pam_module_add is defined and result_pam_module_add.changed)
       or (result_pam_module_edit is defined and result_pam_module_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_line_present.found is defined
  - result_pam_line_present.found == 0
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Define a fact for control already
    filtered in case filters are used
  ansible.builtin.set_fact:
    pam_module_control: required
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Check if the required PAM module option
    is present in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    regexp: ^\s*auth\s+{{ pam_module_control | regex_escape() }}\s+pam_tally2.so\s*.*\sdeny\b
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_module_accounts_passwords_pam_tally2_option_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Ensure the "deny" PAM option for "pam_tally2.so"
    is included in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    backrefs: true
    regexp: ^(\s*auth\s+{{ pam_module_control | regex_escape() }}\s+pam_tally2.so.*)
    line: \1 deny={{ var_password_pam_tally2 }}
    state: present
  register: result_pam_accounts_passwords_pam_tally2_add
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module_accounts_passwords_pam_tally2_option_present.found == 0
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Ensure the required value for "deny"
    PAM option from "pam_tally2.so" in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    backrefs: true
    regexp: ^(\s*auth\s+{{ pam_module_control | regex_escape() }}\s+pam_tally2.so\s+.*)(deny)=[0-9a-zA-Z]+\s*(.*)
    line: \1\2={{ var_password_pam_tally2 }} \3
  register: result_pam_accounts_passwords_pam_tally2_edit
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module_accounts_passwords_pam_tally2_option_present.found > 0
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Define a fact for control already
    filtered in case filters are used
  ansible.builtin.set_fact:
    pam_module_control: required
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Check if expected PAM module line
    is present in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    regexp: ^\s*auth\s+{{ pam_module_control | regex_escape() }}\s+pam_tally2.so\s*.*
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_line_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Include or update the PAM module line
    in /etc/pam.d/login
  block:

  - name: Set Deny For Failed Password Attempts - Check if required PAM module line
      is present in /etc/pam.d/login with different control
    ansible.builtin.lineinfile:
      path: /etc/pam.d/login
      regexp: ^\s*auth\s+.*\s+pam_tally2.so\s*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_other_control_present

  - name: Set Deny For Failed Password Attempts - Ensure the correct control for the
      required PAM module line in /etc/pam.d/login
    ansible.builtin.replace:
      dest: /etc/pam.d/login
      regexp: ^(\s*auth\s+).*(\bpam_tally2.so.*)
      replace: \1{{ pam_module_control }} \2
    register: result_pam_module_edit
    when:
    - result_pam_line_other_control_present.found == 1

  - name: Set Deny For Failed Password Attempts - Ensure the required PAM module line
      is included in /etc/pam.d/login
    ansible.builtin.lineinfile:
      dest: /etc/pam.d/login
      insertafter: (fail)
      line: auth    {{ pam_module_control }}    pam_tally2.so
    register: result_pam_module_add
    when:
    - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
      > 1

  - name: Set Deny For Failed Password Attempts - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present is defined
    - result_authselect_present.stat.exists
    - |-
      (result_pam_module_add is defined and result_pam_module_add.changed)
       or (result_pam_module_edit is defined and result_pam_module_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_line_present.found is defined
  - result_pam_line_present.found == 0
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Define a fact for control already
    filtered in case filters are used
  ansible.builtin.set_fact:
    pam_module_control: required
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Check if the required PAM module option
    is present in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    regexp: ^\s*auth\s+{{ pam_module_control | regex_escape() }}\s+pam_tally2.so\s*.*\sonerr\b
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_module_accounts_passwords_pam_tally2_option_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Ensure the "onerr" PAM option for
    "pam_tally2.so" is included in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    backrefs: true
    regexp: ^(\s*auth\s+{{ pam_module_control | regex_escape() }}\s+pam_tally2.so.*)
    line: \1 onerr=fail
    state: present
  register: result_pam_accounts_passwords_pam_tally2_add
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module_accounts_passwords_pam_tally2_option_present.found == 0
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Ensure the required value for "onerr"
    PAM option from "pam_tally2.so" in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    backrefs: true
    regexp: ^(\s*auth\s+{{ pam_module_control | regex_escape() }}\s+pam_tally2.so\s+.*)(onerr)=[0-9a-zA-Z]+\s*(.*)
    line: \1\2=fail \3
  register: result_pam_accounts_passwords_pam_tally2_edit
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module_accounts_passwords_pam_tally2_option_present.found > 0
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Define a fact for control already
    filtered in case filters are used
  ansible.builtin.set_fact:
    pam_module_control: required
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Check if expected PAM module line
    is present in /etc/pam.d/common-account
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-account
    regexp: ^\s*account\s+{{ pam_module_control | regex_escape() }}\s+pam_tally2.so\s*.*
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_line_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Include or update the PAM module line
    in /etc/pam.d/common-account
  block:

  - name: Set Deny For Failed Password Attempts - Check if required PAM module line
      is present in /etc/pam.d/common-account with different control
    ansible.builtin.lineinfile:
      path: /etc/pam.d/common-account
      regexp: ^\s*account\s+.*\s+pam_tally2.so\s*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_other_control_present

  - name: Set Deny For Failed Password Attempts - Ensure the correct control for the
      required PAM module line in /etc/pam.d/common-account
    ansible.builtin.replace:
      dest: /etc/pam.d/common-account
      regexp: ^(\s*account\s+).*(\bpam_tally2.so.*)
      replace: \1{{ pam_module_control }} \2
    register: result_pam_module_edit
    when:
    - result_pam_line_other_control_present.found == 1

  - name: Set Deny For Failed Password Attempts - Ensure the required PAM module line
      is included in /etc/pam.d/common-account
    ansible.builtin.lineinfile:
      dest: /etc/pam.d/common-account
      line: account    {{ pam_module_control }}    pam_tally2.so
    register: result_pam_module_add
    when:
    - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
      > 1

  - name: Set Deny For Failed Password Attempts - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present is defined
    - result_authselect_present.stat.exists
    - |-
      (result_pam_module_add is defined and result_pam_module_add.changed)
       or (result_pam_module_edit is defined and result_pam_module_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_line_present.found is defined
  - result_pam_line_present.found == 0
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Define a fact for control already
    filtered in case filters are used
  ansible.builtin.set_fact:
    pam_module_control: required
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Check if the required PAM module option
    is present in /etc/pam.d/common-account
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-account
    regexp: ^\s*account\s+{{ pam_module_control | regex_escape() }}\s+pam_tally2.so\s*.*\s\b
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_module_accounts_passwords_pam_tally2_option_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Ensure the "" PAM option for "pam_tally2.so"
    is included in /etc/pam.d/common-account
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-account
    backrefs: true
    regexp: ^(\s*account\s+{{ pam_module_control | regex_escape() }}\s+pam_tally2.so.*)
    line: \1
    state: present
  register: result_pam_accounts_passwords_pam_tally2_add
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module_accounts_passwords_pam_tally2_option_present.found == 0
  tags:
  - CCE-83055-4
  - DISA-STIG-SLES-12-010130
  - NIST-800-53-AC-7(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_tally2='3'

# Use a non-number regexp to force update of the value of the deny option




if ! grep -qP "^\s*auth\s+required\s+pam_tally2.so\s*.*" "/etc/pam.d/login"; then
    # Line matching group + control + module was not found. Check group + module.
    if [ "$(grep -cP '^\s*auth\s+.*\s+pam_tally2.so\s*' "/etc/pam.d/login")" -eq 1 ]; then
        # The control is updated only if one single line matches.
        sed -i -E --follow-symlinks "s/^(\s*auth\s+).*(\bpam_tally2.so.*)/\1required \2/" "/etc/pam.d/login"
    else
        echo "auth    required    pam_tally2.so" >> "/etc/pam.d/login"
    fi
fi
# Check the option
if ! grep -qP "^\s*auth\s+required\s+pam_tally2.so\s*.*\sdeny\b" "/etc/pam.d/login"; then
    sed -i -E --follow-symlinks "/\s*auth\s+required\s+pam_tally2.so.*/ s/$/ deny=${var_password_pam_tally2}/" "/etc/pam.d/login"
else
    sed -i -E --follow-symlinks "s/(\s*auth\s+required\s+pam_tally2.so\s+.*)(deny=)[[:alnum:]]+\s*(.*)/\1\2${var_password_pam_tally2} \3/" "/etc/pam.d/login"
fi
if ! grep -qP "^\s*auth\s+required\s+pam_tally2.so\s*.*" "/etc/pam.d/login"; then
    # Line matching group + control + module was not found. Check group + module.
    if [ "$(grep -cP '^\s*auth\s+.*\s+pam_tally2.so\s*' "/etc/pam.d/login")" -eq 1 ]; then
        # The control is updated only if one single line matches.
        sed -i -E --follow-symlinks "s/^(\s*auth\s+).*(\bpam_tally2.so.*)/\1required \2/" "/etc/pam.d/login"
    else
        LAST_MATCH_LINE=$(grep -nP "(fail)" "/etc/pam.d/login" | tail -n 1 | cut -d: -f 1)
        if [ ! -z $LAST_MATCH_LINE ]; then
            sed -i --follow-symlinks $LAST_MATCH_LINE" a auth     required    pam_tally2.so" "/etc/pam.d/login"
        else
            echo "auth    required    pam_tally2.so" >> "/etc/pam.d/login"
        fi
    fi
fi
# Check the option
if ! grep -qP "^\s*auth\s+required\s+pam_tally2.so\s*.*\sonerr\b" "/etc/pam.d/login"; then
    sed -i -E --follow-symlinks "/\s*auth\s+required\s+pam_tally2.so.*/ s/$/ onerr=fail/" "/etc/pam.d/login"
else
    sed -i -E --follow-symlinks "s/(\s*auth\s+required\s+pam_tally2.so\s+.*)(onerr=)[[:alnum:]]+\s*(.*)/\1\2fail \3/" "/etc/pam.d/login"
fi
if ! grep -qP "^\s*account\s+required\s+pam_tally2.so\s*.*" "/etc/pam.d/common-account"; then
    # Line matching group + control + module was not found. Check group + module.
    if [ "$(grep -cP '^\s*account\s+.*\s+pam_tally2.so\s*' "/etc/pam.d/common-account")" -eq 1 ]; then
        # The control is updated only if one single line matches.
        sed -i -E --follow-symlinks "s/^(\s*account\s+).*(\bpam_tally2.so.*)/\1required \2/" "/etc/pam.d/common-account"
    else
        echo "account    required    pam_tally2.so" >> "/etc/pam.d/common-account"
    fi
fi
# Check the option
if ! grep -qP "^\s*account\s+required\s+pam_tally2.so\s*.*\s\b" "/etc/pam.d/common-account"; then
    sed -i -E --follow-symlinks "/\s*account\s+required\s+pam_tally2.so.*/ s/$/ /" "/etc/pam.d/common-account"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set Lockout Time for Failed Password Attempts using pam_tally2   [ref]

This rule configures the system to lock out accounts during a specified time period after a number of incorrect login attempts using pam_tally2.so.
Rationale:
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, also known as brute-forcing, is reduced. Limits are imposed by locking the account.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_tally2_unlock_time
Identifiers:

CCE-91598-3

References:
cis-csc1, 12, 15, 16
cobit5DSS05.04, DSS05.10, DSS06.10
disaCCI-002238, CCI-000044
isa-62443-20094.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
ism0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nistCM-6(a), AC-7(b), IA-5(c)
nist-csfPR.AC-7
osppFMT_MOF_EXT.1
pcidssReq-8.1.7
os-srgSRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005
cis5.3.2
anssiR31
pcidss48.3.4

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91598-3
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_tally2_unlock_time # promote to variable
  set_fact:
    var_accounts_passwords_pam_tally2_unlock_time: !!str 1800
  tags:
    - always

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Define a
    fact for control already filtered in case filters are used
  ansible.builtin.set_fact:
    pam_module_control: required
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91598-3
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Check if
    expected PAM module line is present in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    regexp: ^\s*auth\s+{{ pam_module_control | regex_escape() }}\s+pam_tally2.so\s*.*
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_line_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91598-3
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Include or
    update the PAM module line in /etc/pam.d/login
  block:

  - name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Check if
      required PAM module line is present in /etc/pam.d/login with different control
    ansible.builtin.lineinfile:
      path: /etc/pam.d/login
      regexp: ^\s*auth\s+.*\s+pam_tally2.so\s*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_other_control_present

  - name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Ensure
      the correct control for the required PAM module line in /etc/pam.d/login
    ansible.builtin.replace:
      dest: /etc/pam.d/login
      regexp: ^(\s*auth\s+).*(\bpam_tally2.so.*)
      replace: \1{{ pam_module_control }} \2
    register: result_pam_module_edit
    when:
    - result_pam_line_other_control_present.found == 1

  - name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Ensure
      the required PAM module line is included in /etc/pam.d/login
    ansible.builtin.lineinfile:
      dest: /etc/pam.d/login
      line: auth    {{ pam_module_control }}    pam_tally2.so
    register: result_pam_module_add
    when:
    - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
      > 1

  - name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Ensure
      authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present is defined
    - result_authselect_present.stat.exists
    - |-
      (result_pam_module_add is defined and result_pam_module_add.changed)
       or (result_pam_module_edit is defined and result_pam_module_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_line_present.found is defined
  - result_pam_line_present.found == 0
  tags:
  - CCE-91598-3
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Define a
    fact for control already filtered in case filters are used
  ansible.builtin.set_fact:
    pam_module_control: required
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91598-3
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Check if
    the required PAM module option is present in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    regexp: ^\s*auth\s+{{ pam_module_control | regex_escape() }}\s+pam_tally2.so\s*.*\sunlock_time\b
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_module_accounts_passwords_pam_tally2_unlock_time_option_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91598-3
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Ensure the
    "unlock_time" PAM option for "pam_tally2.so" is included in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    backrefs: true
    regexp: ^(\s*auth\s+{{ pam_module_control | regex_escape() }}\s+pam_tally2.so.*)
    line: \1 unlock_time={{ var_accounts_passwords_pam_tally2_unlock_time }}
    state: present
  register: result_pam_accounts_passwords_pam_tally2_unlock_time_add
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module_accounts_passwords_pam_tally2_unlock_time_option_present.found
    == 0
  tags:
  - CCE-91598-3
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Ensure the
    required value for "unlock_time" PAM option from "pam_tally2.so" in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    backrefs: true
    regexp: ^(\s*auth\s+{{ pam_module_control | regex_escape() }}\s+pam_tally2.so\s+.*)(unlock_time)=[0-9a-zA-Z]+\s*(.*)
    line: \1\2={{ var_accounts_passwords_pam_tally2_unlock_time }} \3
  register: result_pam_accounts_passwords_pam_tally2_unlock_time_edit
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module_accounts_passwords_pam_tally2_unlock_time_option_present.found
    > 0
  tags:
  - CCE-91598-3
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Define a
    fact for control already filtered in case filters are used
  ansible.builtin.set_fact:
    pam_module_control: required
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91598-3
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Check if
    expected PAM module line is present in /etc/pam.d/common-account
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-account
    regexp: ^\s*account\s+{{ pam_module_control | regex_escape() }}\s+pam_tally2.so\s*.*
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_line_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91598-3
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Include or
    update the PAM module line in /etc/pam.d/common-account
  block:

  - name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Check if
      required PAM module line is present in /etc/pam.d/common-account with different
      control
    ansible.builtin.lineinfile:
      path: /etc/pam.d/common-account
      regexp: ^\s*account\s+.*\s+pam_tally2.so\s*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_other_control_present

  - name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Ensure
      the correct control for the required PAM module line in /etc/pam.d/common-account
    ansible.builtin.replace:
      dest: /etc/pam.d/common-account
      regexp: ^(\s*account\s+).*(\bpam_tally2.so.*)
      replace: \1{{ pam_module_control }} \2
    register: result_pam_module_edit
    when:
    - result_pam_line_other_control_present.found == 1

  - name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Ensure
      the required PAM module line is included in /etc/pam.d/common-account
    ansible.builtin.lineinfile:
      dest: /etc/pam.d/common-account
      line: account    {{ pam_module_control }}    pam_tally2.so
    register: result_pam_module_add
    when:
    - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
      > 1

  - name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Ensure
      authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present is defined
    - result_authselect_present.stat.exists
    - |-
      (result_pam_module_add is defined and result_pam_module_add.changed)
       or (result_pam_module_edit is defined and result_pam_module_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_line_present.found is defined
  - result_pam_line_present.found == 0
  tags:
  - CCE-91598-3
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Define a
    fact for control already filtered in case filters are used
  ansible.builtin.set_fact:
    pam_module_control: required
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91598-3
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Check if
    the required PAM module option is present in /etc/pam.d/common-account
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-account
    regexp: ^\s*account\s+{{ pam_module_control | regex_escape() }}\s+pam_tally2.so\s*.*\s\b
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_module_accounts_passwords_pam_tally2_unlock_time_option_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91598-3
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Ensure the
    "" PAM option for "pam_tally2.so" is included in /etc/pam.d/common-account
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-account
    backrefs: true
    regexp: ^(\s*account\s+{{ pam_module_control | regex_escape() }}\s+pam_tally2.so.*)
    line: \1
    state: present
  register: result_pam_accounts_passwords_pam_tally2_unlock_time_add
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module_accounts_passwords_pam_tally2_unlock_time_option_present.found
    == 0
  tags:
  - CCE-91598-3
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_tally2_unlock_time='1800'

# Use a non-number regexp to force update of the value of the deny option
if ! grep -qP "^\s*auth\s+required\s+pam_tally2.so\s*.*" "/etc/pam.d/login"; then
    # Line matching group + control + module was not found. Check group + module.
    if [ "$(grep -cP '^\s*auth\s+.*\s+pam_tally2.so\s*' "/etc/pam.d/login")" -eq 1 ]; then
        # The control is updated only if one single line matches.
        sed -i -E --follow-symlinks "s/^(\s*auth\s+).*(\bpam_tally2.so.*)/\1required \2/" "/etc/pam.d/login"
    else
        echo "auth    required    pam_tally2.so" >> "/etc/pam.d/login"
    fi
fi
# Check the option
if ! grep -qP "^\s*auth\s+required\s+pam_tally2.so\s*.*\sunlock_time\b" "/etc/pam.d/login"; then
    sed -i -E --follow-symlinks "/\s*auth\s+required\s+pam_tally2.so.*/ s/$/ unlock_time=${var_accounts_passwords_pam_tally2_unlock_time}/" "/etc/pam.d/login"
else
    sed -i -E --follow-symlinks "s/(\s*auth\s+required\s+pam_tally2.so\s+.*)(unlock_time=)[[:alnum:]]+\s*(.*)/\1\2${var_accounts_passwords_pam_tally2_unlock_time} \3/" "/etc/pam.d/login"
fi
if ! grep -qP "^\s*account\s+required\s+pam_tally2.so\s*.*" "/etc/pam.d/common-account"; then
    # Line matching group + control + module was not found. Check group + module.
    if [ "$(grep -cP '^\s*account\s+.*\s+pam_tally2.so\s*' "/etc/pam.d/common-account")" -eq 1 ]; then
        # The control is updated only if one single line matches.
        sed -i -E --follow-symlinks "s/^(\s*account\s+).*(\bpam_tally2.so.*)/\1required \2/" "/etc/pam.d/common-account"
    else
        echo "account    required    pam_tally2.so" >> "/etc/pam.d/common-account"
    fi
fi
# Check the option
if ! grep -qP "^\s*account\s+required\s+pam_tally2.so\s*.*\s\b" "/etc/pam.d/common-account"; then
    sed -i -E --follow-symlinks "/\s*account\s+required\s+pam_tally2.so.*/ s/$/ /" "/etc/pam.d/common-account"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Set Password Hashing Algorithm   Group contains 4 rules
[ref]   The system's default algorithm for storing password hashes in /etc/shadow is SHA-512. This can be configured in several locations.

Rule   Set PAM's Common Authentication Hashing Algorithm   [ref]

The PAM system service can be configured to only store encrypted representations of passwords. In /etc/pam.d/common-auth, the auth section of the file controls which PAM modules execute during a password change. Set the pam_unix.so module in the auth section to include the argument sha512, as shown below:
auth   required    pam_unix.so sha512 other arguments...
         

This will help ensure when local users change their authentication method, hashes for the new authentications will be generated using the SHA-512 algorithm. This is the default.
Rationale:
Unapproved mechanisms used for authentication to the cryptographic module are not verified and therefore cannot be relied on to provide confidentiality or integrity, and data may be compromised. This setting ensures user and group account administration utilities are configured to store only encrypted representations of passwords. Additionally, the crypt_style configuration option ensures the use of a strong hashing algorithm that makes password cracking attacks more difficult.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_commonauth
Identifiers:

CCE-91647-8

References:
disaCCI-000803
nistIA-7, IA-7.1
pcidssReq-8.2.1
os-srgSRG-OS-000120-GPOS-00061
pcidss48.3.2

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91647-8
  - NIST-800-53-IA-7
  - NIST-800-53-IA-7.1
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_commonauth

- name: Set control_flag fact
  set_fact:
    control_flag: required
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91647-8
  - NIST-800-53-IA-7
  - NIST-800-53-IA-7.1
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_commonauth

- name: Check to see if 'pam_unix.so' module is configured in '/etc/pam.d/common-auth'
  shell: |
    set -o pipefail
    grep -E '^\s*auth\s+\S+\s+pam_unix.so' /etc/pam.d/common-auth || true
  register: check_pam_module_result
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91647-8
  - NIST-800-53-IA-7
  - NIST-800-53-IA-7.1
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_commonauth

- name: Configure 'pam_unix.so' module in '/etc/pam.d/common-auth'
  lineinfile:
    path: /etc/pam.d/common-auth
    line: auth required pam_unix.so
    state: present
  when:
  - '"pam" in ansible_facts.packages'
  - check_pam_module_result.stdout is defined and '"pam_unix.so" not in check_pam_module_result.stdout'
  tags:
  - CCE-91647-8
  - NIST-800-53-IA-7
  - NIST-800-53-IA-7.1
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_commonauth

- name: Ensure 'pam_unix.so' module has conforming control flag
  lineinfile:
    path: /etc/pam.d/common-auth
    regexp: ^(\s*auth\s+)\S+(\s+pam_unix.so\s+.*)
    line: \g<1>required\g<2>
    backrefs: true
  when:
  - '"pam" in ansible_facts.packages'
  - control_flag|length
  tags:
  - CCE-91647-8
  - NIST-800-53-IA-7
  - NIST-800-53-IA-7.1
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_commonauth

- name: Set argument_value fact
  set_fact:
    argument_value: ''
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91647-8
  - NIST-800-53-IA-7
  - NIST-800-53-IA-7.1
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_commonauth

- name: Ensure "pam_unix.so" module has argument "sha512"
  lineinfile:
    path: /etc/pam.d/common-auth
    regexp: ^(\s*auth\s+required\s+pam_unix.so(?:\s+\S+)*\s+sha512=)(?!)\S*((\s+\S+)*\s*\\*\s*)$
    line: \g<1>\g<2>
    backrefs: true
  when:
  - '"pam" in ansible_facts.packages'
  - argument_value|length
  tags:
  - CCE-91647-8
  - NIST-800-53-IA-7
  - NIST-800-53-IA-7.1
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_commonauth

- name: Check the presence of "sha512" argument in "pam_unix.so" module
  shell: |
    set -o pipefail
    grep -E '^\s*auth\s+required\s+pam_unix.so.*\s+sha512(=|\s|\s*$)' /etc/pam.d/common-auth || true
  register: check_pam_module_argument_result
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91647-8
  - NIST-800-53-IA-7
  - NIST-800-53-IA-7.1
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_commonauth

- name: Add "sha512" argument to "pam_unix.so" module
  lineinfile:
    path: /etc/pam.d/common-auth
    regexp: ^(\s*auth\s+required\s+pam_unix.so)((\s+\S+)*\s*(\\)*$)
    line: \g<1> sha512\g<2>
    backrefs: true
  when:
  - '"pam" in ansible_facts.packages'
  - check_pam_module_argument_result is not skipped and '"sha512" not in check_pam_module_argument_result.stdout'
  tags:
  - CCE-91647-8
  - NIST-800-53-IA-7
  - NIST-800-53-IA-7.1
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_commonauth

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

if [ -e "/etc/pam.d/common-auth" ] ; then
    valueRegex="" defaultValue=""
    # non-empty values need to be preceded by an equals sign
    [ -n "${valueRegex}" ] && valueRegex="=${valueRegex}"
    # add an equals sign to non-empty values
    [ -n "${defaultValue}" ] && defaultValue="=${defaultValue}"

    # fix 'type' if it's wrong
    if grep -q -P "^\\s*(?"'!'"auth\\s)[[:alnum:]]+\\s+[[:alnum:]]+\\s+pam_unix.so" < "/etc/pam.d/common-auth" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*)[[:alnum:]]+(\\s+[[:alnum:]]+\\s+pam_unix.so)/\\1auth\\2/" "/etc/pam.d/common-auth"
    fi

    # fix 'control' if it's wrong
    if grep -q -P "^\\s*auth\\s+(?"'!'"required)[[:alnum:]]+\\s+pam_unix.so" < "/etc/pam.d/common-auth" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*auth\\s+)[[:alnum:]]+(\\s+pam_unix.so)/\\1required\\2/" "/etc/pam.d/common-auth"
    fi

    # fix the value for 'option' if one exists but does not match 'valueRegex'
    if grep -q -P "^\\s*auth\\s+required\\s+pam_unix.so(\\s.+)?\\s+sha512(?"'!'"${valueRegex}(\\s|\$))" < "/etc/pam.d/common-auth" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*auth\\s+required\\s+pam_unix.so(\\s.+)?\\s)sha512=[^[:space:]]*/\\1sha512${defaultValue}/" "/etc/pam.d/common-auth"

    # add 'option=default' if option is not set
    elif grep -q -E "^\\s*auth\\s+required\\s+pam_unix.so" < "/etc/pam.d/common-auth" &&
            grep    -E "^\\s*auth\\s+required\\s+pam_unix.so" < "/etc/pam.d/common-auth" | grep -q -E -v "\\ssha512(=|\\s|\$)" ; then

        sed --follow-symlinks -i -E -e "s/^(\\s*auth\\s+required\\s+pam_unix.so[^\\n]*)/\\1 sha512${defaultValue}/" "/etc/pam.d/common-auth"
    # add a new entry if none exists
    elif ! grep -q -P "^\\s*auth\\s+required\\s+pam_unix.so(\\s.+)?\\s+sha512${valueRegex}(\\s|\$)" < "/etc/pam.d/common-auth" ; then
        echo "auth required pam_unix.so sha512${defaultValue}" >> "/etc/pam.d/common-auth"
    fi
else
    echo "/etc/pam.d/common-auth doesn't exist" >&2
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set Password Hashing Algorithm in /etc/libuser.conf   [ref]

In /etc/libuser.conf, add or correct the following line in its [defaults] section to ensure the system will use the SHA-512 algorithm for password hashing:
crypt_style = sha512
Rationale:
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kepy in plain text.

This setting ensures user and group account administration utilities are configured to store only encrypted representations of passwords. Additionally, the crypt_style configuration option ensures the use of a strong hashing algorithm that makes password cracking attacks more difficult.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_libuserconf
Identifiers:

CCE-92220-3

References:
cis-csc1, 12, 15, 16, 5
cjis5.6.2.2
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui3.13.11
disaCCI-000196
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism0418, 1055, 1402
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(c), CM-6(a)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
pcidssReq-8.2.1
os-srgSRG-OS-000073-GPOS-00041
pcidss48.3.2

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92220-3
  - CJIS-5.6.2.2
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_libuserconf

- name: Set Password Hashing Algorithm in /etc/libuser.conf
  lineinfile:
    dest: /etc/libuser.conf
    insertafter: ^\s*\[defaults]
    regexp: ^#?crypt_style
    line: crypt_style = sha512
    state: present
    create: true
  when: '"libuser" in ansible_facts.packages'
  tags:
  - CCE-92220-3
  - CJIS-5.6.2.2
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_libuserconf

# Remediation is applicable only in certain platforms
if rpm --quiet -q libuser; then

LIBUSER_CONF="/etc/libuser.conf"
CRYPT_STYLE_REGEX='[[:space:]]*\[defaults](.*(\n)+)+?[[:space:]]*crypt_style[[:space:]]*'

# Try find crypt_style in [defaults] section. If it is here, then change algorithm to sha512.
# If it isn't here, then add it to [defaults] section.
if grep -qzosP $CRYPT_STYLE_REGEX $LIBUSER_CONF ; then
        sed -i "s/\(crypt_style[[:space:]]*=[[:space:]]*\).*/\1sha512/g" $LIBUSER_CONF
elif grep -qs "\[defaults]" $LIBUSER_CONF ; then
        sed -i "/[[:space:]]*\[defaults]/a crypt_style = sha512" $LIBUSER_CONF
else
        echo -e "[defaults]\ncrypt_style = sha512" >> $LIBUSER_CONF
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set Password Hashing Algorithm in /etc/login.defs   [ref]

In /etc/login.defs, add or correct the following line to ensure the system will use SHA512 as the hashing algorithm:
ENCRYPT_METHOD SHA512
         
Rationale:
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kept in plain text.

Using a stronger hashing algorithm makes password cracking attacks more difficult.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_logindefs
Identifiers:

CCE-83029-9

References:
cis-csc1, 12, 15, 16, 5
cjis5.6.2.2
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui3.13.11
disaCCI-000196
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism0418, 1055, 1402
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(c), CM-6(a)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
pcidssReq-8.2.1
os-srgSRG-OS-000073-GPOS-00041
stigidSLES-12-010210
cis5.4.1.1
pcidss48.3.2
stigrefSV-217122r646689_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83029-9
  - CJIS-5.6.2.2
  - DISA-STIG-SLES-12-010210
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_logindefs
- name: XCCDF Value var_password_hashing_algorithm # promote to variable
  set_fact:
    var_password_hashing_algorithm: !!str SHA512
  tags:
    - always

- name: Set Password Hashing Algorithm in /etc/login.defs
  lineinfile:
    dest: /etc/login.defs
    regexp: ^#?ENCRYPT_METHOD
    line: ENCRYPT_METHOD {{ var_password_hashing_algorithm }}
    state: present
    create: true
  when: '"shadow" in ansible_facts.packages'
  tags:
  - CCE-83029-9
  - CJIS-5.6.2.2
  - DISA-STIG-SLES-12-010210
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_logindefs

# Remediation is applicable only in certain platforms
if rpm --quiet -q shadow; then

var_password_hashing_algorithm='SHA512'

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ENCRYPT_METHOD")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$var_password_hashing_algorithm"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ENCRYPT_METHOD\\>" "/etc/login.defs"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^ENCRYPT_METHOD\\>.*/$escaped_formatted_output/gi" "/etc/login.defs"
else
    if [[ -s "/etc/login.defs" ]] && [[ -n "$(tail -c 1 -- "/etc/login.defs" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/login.defs"
    fi
    cce="CCE-83029-9"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/login.defs" >> "/etc/login.defs"
    printf '%s\n' "$formatted_output" >> "/etc/login.defs"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set PAM''s Password Hashing Algorithm   [ref]

The PAM system service can be configured to only store encrypted representations of passwords. In "/etc/pam.d/common-password", the password section of the file controls which PAM modules execute during a password change. Set the pam_unix.so module in the password section to include the argument sha512, as shown below:
password    required    pam_unix.so sha512 other arguments...
         

This will help ensure when local users change their passwords, hashes for the new passwords will be generated using the SHA-512 algorithm. This is the default.
Rationale:
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kepy in plain text.

This setting ensures user and group account administration utilities are configured to store only encrypted representations of passwords. Additionally, the crypt_style configuration option ensures the use of a strong hashing algorithm that makes password cracking attacks more difficult.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_systemauth
Identifiers:

CCE-83184-2

References:
cis-csc1, 12, 15, 16, 5
cjis5.6.2.2
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui3.13.11
disaCCI-000196, CCI-000803
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism0418, 1055, 1402
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(c), IA-5(1)(c), CM-6(a)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
pcidssReq-8.2.1
os-srgSRG-OS-000073-GPOS-00041, SRG-OS-000120-GPOS-00061
stigidSLES-12-010230
anssiR68
pcidss48.3.2
stigrefSV-217124r877397_rule

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83184-2
  - CJIS-5.6.2.2
  - DISA-STIG-SLES-12-010230
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - set_password_hashing_algorithm_systemauth

- name: Set PAM's Password Hashing Algorithm - Check if /etc/pam.d/common-password
    file is present
  ansible.builtin.stat:
    path: /etc/pam.d/common-password
  register: result_pam_file_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83184-2
  - CJIS-5.6.2.2
  - DISA-STIG-SLES-12-010230
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - set_password_hashing_algorithm_systemauth

- name: Set PAM's Password Hashing Algorithm - Check the proper remediation for the
    system
  block:

  - name: Set PAM's Password Hashing Algorithm - Define the PAM file to be edited
      as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/common-password

  - name: Set PAM's Password Hashing Algorithm - Check if system relies on authselect
      tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Set PAM's Password Hashing Algorithm - Ensure authselect custom profile
      is used if authselect is present
    block:

    - name: Set PAM's Password Hashing Algorithm - Check integrity of authselect current
        profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Set PAM's Password Hashing Algorithm - Informative message based on the
        authselect integrity check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Set PAM's Password Hashing Algorithm - Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Set PAM's Password Hashing Algorithm - Define the current authselect profile
        as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Set PAM's Password Hashing Algorithm - Define the new authselect custom
        profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Set PAM's Password Hashing Algorithm - Get authselect current features
        to also enable them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Set PAM's Password Hashing Algorithm - Check if any custom profile with
        the same name was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Set PAM's Password Hashing Algorithm - Create an authselect custom profile
        based on the current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Set PAM's Password Hashing Algorithm - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Set PAM's Password Hashing Algorithm - Ensure the authselect custom profile
        is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Set PAM's Password Hashing Algorithm - Restore the authselect features
        in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Set PAM's Password Hashing Algorithm - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Set PAM's Password Hashing Algorithm - Change the PAM file to be edited
        according to the custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Set PAM's Password Hashing Algorithm - Define a fact for control already
      filtered in case filters are used
    ansible.builtin.set_fact:
      pam_module_control: required

  - name: Set PAM's Password Hashing Algorithm - Check if expected PAM module line
      is present in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ pam_module_control | regex_escape() }}\s+pam_unix.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: Set PAM's Password Hashing Algorithm - Include or update the PAM module
      line in {{ pam_file_path }}
    block:

    - name: Set PAM's Password Hashing Algorithm - Check if required PAM module line
        is present in {{ pam_file_path }} with different control
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_unix.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: Set PAM's Password Hashing Algorithm - Ensure the correct control for
        the required PAM module line in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_unix.so.*)
        replace: \1{{ pam_module_control }} \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: Set PAM's Password Hashing Algorithm - Ensure the required PAM module
        line is included in {{ pam_file_path }}
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        line: password    {{ pam_module_control }}    pam_unix.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: Set PAM's Password Hashing Algorithm - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0

  - name: Set PAM's Password Hashing Algorithm - Define a fact for control already
      filtered in case filters are used
    ansible.builtin.set_fact:
      pam_module_control: required

  - name: Set PAM's Password Hashing Algorithm - Check if the required PAM module
      option is present in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ pam_module_control | regex_escape() }}\s+pam_unix.so\s*.*\ssha512\b
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_module_set_password_hashing_algorithm_systemauth_option_present

  - name: Set PAM's Password Hashing Algorithm - Ensure the "sha512" PAM option for
      "pam_unix.so" is included in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+{{ pam_module_control | regex_escape() }}\s+pam_unix.so.*)
      line: \1 sha512
      state: present
    register: result_pam_set_password_hashing_algorithm_systemauth_add
    when:
    - result_pam_module_set_password_hashing_algorithm_systemauth_option_present.found
      == 0

  - name: Set PAM's Password Hashing Algorithm - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - |-
      (result_pam_set_password_hashing_algorithm_systemauth_add is defined and result_pam_set_password_hashing_algorithm_systemauth_add.changed)
       or (result_pam_set_password_hashing_algorithm_systemauth_edit is defined and result_pam_set_password_hashing_algorithm_systemauth_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_file_present.stat.exists
  tags:
  - CCE-83184-2
  - CJIS-5.6.2.2
  - DISA-STIG-SLES-12-010230
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - set_password_hashing_algorithm_systemauth

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

if [ -e "/etc/pam.d/common-password" ] ; then
    PAM_FILE_PATH="/etc/pam.d/common-password"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/common-password")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    if ! grep -qP "^\s*password\s+required\s+pam_unix.so\s*.*" "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_unix.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_unix.so.*)/\1required \2/" "$PAM_FILE_PATH"
            else
                echo "password    required    pam_unix.so" >> "$PAM_FILE_PATH"
            fi
        fi
        # Check the option
        if ! grep -qP "^\s*password\s+required\s+pam_unix.so\s*.*\ssha512\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "/\s*password\s+required\s+pam_unix.so.*/ s/$/ sha512/" "$PAM_FILE_PATH"
        fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/common-password was not found" >&2
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Protect Physical Console Access   Group contains 2 groups and 4 rules
[ref]   It is impossible to fully protect a system from an attacker with physical access, so securing the space in which the system is located should be considered a necessary step. However, there are some steps which, if taken, make it more difficult for an attacker to quickly or undetectably modify a system from its console.
Group   Configure Screen Locking   Group contains 1 group and 4 rules
[ref]   When a user must temporarily leave an account logged-in, screen locking should be employed to prevent passersby from abusing the account. User education and training is particularly important for screen locking to be effective, and policies can be implemented to reinforce this.

Automatic screen locking is only meant as a safeguard for those cases where a user forgot to lock the screen.
Group   Hardware Tokens for Authentication   Group contains 4 rules

Rule   Install Smart Card Packages For Multifactor Authentication   [ref]

Configure the operating system to implement multifactor authentication by installing the required package with the following command: The pam_pkcs11 package can be installed with the following command:
$ sudo zypper install pam_pkcs11
The mozilla-nss package can be installed with the following command:
$ sudo zypper install mozilla-nss
The mozilla-nss-tools package can be installed with the following command:
$ sudo zypper install mozilla-nss-tools
The pcsc-ccid package can be installed with the following command:
$ sudo zypper install pcsc-ccid
The pcsc-lite package can be installed with the following command:
$ sudo zypper install pcsc-lite
The pcsc-tools package can be installed with the following command:
$ sudo zypper install pcsc-tools
The opensc package can be installed with the following command:
$ sudo zypper install opensc
The coolkey package can be installed with the following command:
$ sudo zypper install coolkey
Rationale:
Using an authentication device, such as a CAC or token that is separate from the information system, ensures that even if the information system is compromised, that compromise will not affect credentials stored on the authentication device.

Multifactor solutions that require devices separate from information systems gaining access include, for example, hardware tokens providing time-based or challenge-response authenticators and smart cards such as the U.S. Government Personal Identity Verification card and the DoD Common Access Card.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_install_smartcard_packages
Identifiers:

CCE-83177-6

References:
disaCCI-000765, CCI-001948, CCI-001953, CCI-001954
nistCM-6(a)
pcidssReq-8.3
os-srgSRG-OS-000105-GPOS-00052, SRG-OS-000375-GPOS-00160, SRG-OS-000375-GPOS-00161, SRG-OS-000377-GPOS-00162
stigidSLES-12-030500
stigrefSV-217299r854165_rule

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Set smartcard packages fact
  set_fact:
    smartcard_packages:
    - pam_pkcs11
    - mozilla-nss
    - mozilla-nss-tools
    - pcsc-ccid
    - pcsc-lite
    - pcsc-tools
    - opensc
    - coolkey
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture != "s390x"
  tags:
  - CCE-83177-6
  - DISA-STIG-SLES-12-030500
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.3
  - enable_strategy
  - install_smartcard_packages
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure {{ smartcard_packages }} are installed
  package:
    name: '{{ smartcard_packages }}'
    state: present
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture != "s390x"
  tags:
  - CCE-83177-6
  - DISA-STIG-SLES-12-030500
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.3
  - enable_strategy
  - install_smartcard_packages
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { ! grep -q s390x /proc/sys/kernel/osrelease; }; then

SMARTCARD_PACKAGES=( "pam_pkcs11"  "mozilla-nss"  "mozilla-nss-tools"  "pcsc-ccid"  "pcsc-lite"  "pcsc-tools"  "opensc" "coolkey")

for PKGNAME in "${SMARTCARD_PACKAGES[@]}"
do
    zypper install -y "$PKGNAME"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable the pcscd Service   [ref]

The pcscd service can be enabled with the following command:
$ sudo systemctl enable pcscd.service
Rationale:
Using an authentication device, such as a CAC or token that is separate from the information system, ensures that even if the information system is compromised, that compromise will not affect credentials stored on the authentication device.

Multifactor solutions that require devices separate from information systems gaining access include, for example, hardware tokens providing time-based or challenge-response authenticators and smart cards such as the U.S. Government Personal Identity Verification card and the DoD Common Access Card.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_service_pcscd_enabled
Identifiers:

CCE-91646-0

References:
disaCCI-001954
ism1382, 1384, 1386
nistIA-2(1), IA-2(2), IA-2(3), IA-2(4), IA-2(6), IA-2(7), IA-2(11), CM-6(a)
pcidssReq-8.3
os-srgSRG-OS-000375-GPOS-00160


[customizations.services]
enabled = ["pcscd"]

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Enable service pcscd
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Start service pcscd
    systemd:
      name: pcscd
      state: started
      masked: 'no'
    when:
    - '"pcsc-lite" in ansible_facts.packages'

  - name: Enable service pcscd
    ansible.builtin.command:
      cmd: systemctl enable pcscd
    when:
    - '"pcsc-lite" in ansible_facts.packages'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91646-0
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2(1)
  - NIST-800-53-IA-2(11)
  - NIST-800-53-IA-2(2)
  - NIST-800-53-IA-2(3)
  - NIST-800-53-IA-2(4)
  - NIST-800-53-IA-2(6)
  - NIST-800-53-IA-2(7)
  - PCI-DSS-Req-8.3
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_pcscd_enabled

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'pcscd.service'
"$SYSTEMCTL_EXEC" start 'pcscd.service'
"$SYSTEMCTL_EXEC" enable 'pcscd.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include enable_pcscd

class enable_pcscd {
  service {'pcscd':
    enable => true,
    ensure => 'running',
  }
}

Rule   Configure opensc Smart Card Drivers   [ref]

The OpenSC smart card tool can auto-detect smart card drivers; however, setting the smart card drivers in use by your organization helps to prevent users from using unauthorized smart cards. The default smart card driver for this profile is cac. To configure the OpenSC driver, edit the /etc/opensc.conf and add the following line into the file in the app default block, so it will look like:
app default {
   ...
   card_drivers = cac;
}
Rationale:
Smart card login provides two-factor authentication stronger than that provided by a username and password combination. Smart cards leverage PKI (public key infrastructure) in order to provide and verify credentials. Configuring the smart card driver in use by your organization helps to prevent users from using unauthorized smart cards.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_configure_opensc_card_drivers
Identifiers:

CCE-92221-1

References:
cis-csc1, 12, 15, 16, 5
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-000765, CCI-000766, CCI-000767, CCI-000768, CCI-000771, CCI-000772, CCI-000884
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism1382, 1384, 1386
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-2(1), IA-2(2), IA-2(3), IA-2(4), IA-2(6), IA-2(7), IA-2(11), CM-6(a)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
pcidssReq-8.3
os-srgSRG-OS-000104-GPOS-00051, SRG-OS-000106-GPOS-00053, SRG-OS-000107-GPOS-00054, SRG-OS-000109-GPOS-00056, SRG-OS-000108-GPOS-00055, SRG-OS-000108-GPOS-00057, SRG-OS-000108-GPOS-00058

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: XCCDF Value var_smartcard_drivers # promote to variable
  set_fact:
    var_smartcard_drivers: !!str cac
  tags:
    - always

- name: Check existence of opensc conf
  stat:
    path: /etc/opensc.conf
  register: opensc_conf_cd
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92221-1
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2(1)
  - NIST-800-53-IA-2(11)
  - NIST-800-53-IA-2(2)
  - NIST-800-53-IA-2(3)
  - NIST-800-53-IA-2(4)
  - NIST-800-53-IA-2(6)
  - NIST-800-53-IA-2(7)
  - PCI-DSS-Req-8.3
  - configure_opensc_card_drivers
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Configure smartcard driver block
  block:

  - name: Check if card_drivers is defined
    command: /usr/bin/opensc-tool -G app:default:card_drivers
    changed_when: false
    register: card_drivers

  - name: Configure opensc Smart Card Drivers
    command: |
      /usr/bin/opensc-tool -S app:default:card_drivers:{{ var_smartcard_drivers }}
    when:
    - card_drivers.stdout != var_smartcard_drivers
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - opensc_conf_cd.stat.exists
  tags:
  - CCE-92221-1
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2(1)
  - NIST-800-53-IA-2(11)
  - NIST-800-53-IA-2(2)
  - NIST-800-53-IA-2(3)
  - NIST-800-53-IA-2(4)
  - NIST-800-53-IA-2(6)
  - NIST-800-53-IA-2(7)
  - PCI-DSS-Req-8.3
  - configure_opensc_card_drivers
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_smartcard_drivers='cac'


OPENSC_TOOL="/usr/bin/opensc-tool"

if [ -f "${OPENSC_TOOL}" ]; then
    ${OPENSC_TOOL} -S app:default:card_drivers:$var_smartcard_drivers
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Force opensc To Use Defined Smart Card Driver   [ref]

The OpenSC smart card middleware can auto-detect smart card drivers; however by forcing the smart card driver in use by your organization, opensc will no longer autodetect or use other drivers unless specified. This helps to prevent users from using unauthorized smart cards. The default smart card driver for this profile is cac. To force the OpenSC driver, edit the /etc/opensc.conf. Look for a line similar to:
# force_card_driver = customcos;
and change it to:
force_card_driver = cac;
Rationale:
Smart card login provides two-factor authentication stronger than that provided by a username and password combination. Smart cards leverage PKI (public key infrastructure) in order to provide and verify credentials. Forcing the smart card driver in use by your organization helps to prevent users from using unauthorized smart cards.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_force_opensc_card_drivers
Identifiers:

CCE-92222-9

References:
cis-csc1, 12, 15, 16, 5
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-000765, CCI-000766, CCI-000767, CCI-000768, CCI-000771, CCI-000772, CCI-000884
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism1382, 1384, 1386
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-2(1), IA-2(2), IA-2(3), IA-2(4), IA-2(6), IA-2(7), IA-2(11), CM-6(a)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
pcidssReq-8.3
os-srgSRG-OS-000104-GPOS-00051, SRG-OS-000106-GPOS-00053, SRG-OS-000107-GPOS-00054, SRG-OS-000109-GPOS-00056, SRG-OS-000108-GPOS-00055, SRG-OS-000108-GPOS-00057, SRG-OS-000108-GPOS-00058

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: XCCDF Value var_smartcard_drivers # promote to variable
  set_fact:
    var_smartcard_drivers: !!str cac
  tags:
    - always

- name: Check existence of opensc conf
  stat:
    path: /etc/opensc.conf
  register: opensc_conf_fcd
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92222-9
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2(1)
  - NIST-800-53-IA-2(11)
  - NIST-800-53-IA-2(2)
  - NIST-800-53-IA-2(3)
  - NIST-800-53-IA-2(4)
  - NIST-800-53-IA-2(6)
  - NIST-800-53-IA-2(7)
  - PCI-DSS-Req-8.3
  - configure_strategy
  - force_opensc_card_drivers
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Force smartcard driver block
  block:

  - name: Check if force_card_driver is defined
    command: /usr/bin/opensc-tool -G app:default:force_card_driver
    changed_when: false
    register: force_card_driver

  - name: Force opensc To Use Defined Smart Card Driver
    command: |
      /usr/bin/opensc-tool -S app:default:force_card_driver:{{ var_smartcard_drivers }}
    when:
    - force_card_driver.stdout != var_smartcard_drivers
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - opensc_conf_fcd.stat.exists
  tags:
  - CCE-92222-9
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2(1)
  - NIST-800-53-IA-2(11)
  - NIST-800-53-IA-2(2)
  - NIST-800-53-IA-2(3)
  - NIST-800-53-IA-2(4)
  - NIST-800-53-IA-2(6)
  - NIST-800-53-IA-2(7)
  - PCI-DSS-Req-8.3
  - configure_strategy
  - force_opensc_card_drivers
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_smartcard_drivers='cac'


OPENSC_TOOL="/usr/bin/opensc-tool"

if [ -f "${OPENSC_TOOL}" ]; then
    ${OPENSC_TOOL} -S app:default:force_card_driver:$var_smartcard_drivers
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Protect Accounts by Restricting Password-Based Login   Group contains 4 groups and 11 rules
[ref]   Conventionally, Unix shell accounts are accessed by providing a username and password to a login program, which tests these values for correctness using the /etc/passwd and /etc/shadow files. Password-based login is vulnerable to guessing of weak passwords, and to sniffing and man-in-the-middle attacks against passwords entered over a network or at an insecure console. Therefore, mechanisms for accessing accounts by entering usernames and passwords should be restricted to those which are operationally necessary.
Group   Set Account Expiration Parameters   Group contains 2 rules
Group   Set Password Expiration Parameters   Group contains 1 rule
[ref]   The file /etc/login.defs controls several password-related settings. Programs such as passwd, su, and login consult /etc/login.defs to determine behavior with regard to password aging, expiration warnings, and length. See the man page login.defs(5) for more information.

Users should be forced to change their passwords, in order to decrease the utility of compromised passwords. However, the need to change passwords often should be balanced against the risk that users will reuse or write down passwords if forced to change them too often. Forcing password changes every 90-360 days, depending on the environment, is recommended. Set the appropriate value as PASS_MAX_DAYS and apply it to existing accounts with the -M flag.

The PASS_MIN_DAYS (-m) setting prevents password changes for 7 days after the first change, to discourage password cycling. If you use this setting, train users to contact an administrator for an emergency password change in case a new password becomes compromised. The PASS_WARN_AGE (-W) setting gives users 7 days of warnings at login time that their passwords are about to expire.

For example, for each existing human user USER, expiration parameters could be adjusted to a 180 day maximum password age, 7 day minimum password age, and 7 day warning period with the following command:
$ sudo chage -M 180 -m 7 -W 7 USER
Group   Verify Proper Storage and Existence of Password Hashes   Group contains 3 rules
[ref]   By default, password hashes for local accounts are stored in the second field (colon-separated) in /etc/shadow. This file should be readable only by processes running with root credentials, preventing users from casually accessing others' password hashes and attempting to crack them. However, it remains possible to misconfigure the system and store password hashes in world-readable files such as /etc/passwd, or to even store passwords themselves in plaintext on the system. Using system-provided tools for password change/creation should allow administrators to avoid such misconfiguration.

Rule   Verify All Account Password Hashes are Shadowed   [ref]

If any password hashes are stored in /etc/passwd (in the second field, instead of an x or *), the cause of this misconfiguration should be investigated. The account should have its password reset and the hash should be properly stored, or the account should be deleted entirely.
Rationale:
The hashes for all user account passwords should be stored in the file /etc/shadow and never in /etc/passwd, which is readable by all users.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_all_shadowed
Identifiers:

CCE-91551-2

References:
cis-csc1, 12, 15, 16, 5
cjis5.5.2
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui3.5.10
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism1410
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nistIA-5(h), CM-6(a)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
pcidssReq-8.2.1
cis6.2.1
pcidss48.3.2

Rule   All GIDs referenced in /etc/passwd must be defined in /etc/group   [ref]

Add a group to the system for each GID referenced without a corresponding group.
Rationale:
If a user is assigned the Group Identifier (GID) of a group not existing on the system, and a group with the Group Identifier (GID) is subsequently created, the user may have unintended rights to any files associated with the group.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_gid_passwd_group_same
Identifiers:

CCE-91552-0

References:
cis-csc1, 12, 15, 16, 5
cjis5.5.2
cobit5DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disaCCI-000764
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
iso27001-2013A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3
nistIA-2, CM-6(a)
nist-csfPR.AC-1, PR.AC-6, PR.AC-7
pcidssReq-8.5.a
os-srgSRG-OS-000104-GPOS-00051
cis6.2.13
pcidss48.2.2

Rule   Prevent Login to Accounts With Empty Password   [ref]

If an account is configured for password authentication but does not have an assigned password, it may be possible to log into the account without authentication. Remove any instances of the nullok in password authentication configurations in /etc/pam.d/ to prevent logins with empty passwords.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. Note that this rule is not applicable for systems running within a container. Having user with empty password within a container is not considered a risk, because it should not be possible to directly login into a container anyway.
Rationale:
If an account has an empty password, anyone could log in and run commands with the privileges of that account. Accounts with empty passwords should never be used in operational environments.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_no_empty_passwords
Identifiers:

CCE-83039-8

References:
cis-csc1, 12, 13, 14, 15, 16, 18, 3, 5
cjis5.5.2
cobit5APO01.06, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.10
cui3.1.1, 3.1.5
disaCCI-000366
hipaa164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-20094.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 5.2
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nistIA-5(1)(a), IA-5(c), CM-6(a)
nist-csfPR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5
osppFIA_UAU.1
pcidssReq-8.2.3
os-srgSRG-OS-000480-GPOS-00227
stigidSLES-12-010231
pcidss48.3.1
stigrefSV-217125r603262_rule

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Find files in /etc/pam.d/ with password auth
  find:
    paths: /etc/pam.d
    contains: .*pam_unix\.so.*nullok.*
    recurse: true
  register: find_pam_conf_files_result
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83039-8
  - CJIS-5.5.2
  - DISA-STIG-SLES-12-010231
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.1
  - configure_strategy
  - high_severity
  - low_complexity
  - medium_disruption
  - no_empty_passwords
  - no_reboot_needed

- name: Prevent Log In to Accounts with Empty Password
  replace:
    dest: '{{ item.path }}'
    regexp: nullok
  with_items: '{{ find_pam_conf_files_result.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83039-8
  - CJIS-5.5.2
  - DISA-STIG-SLES-12-010231
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.1
  - configure_strategy
  - high_severity
  - low_complexity
  - medium_disruption
  - no_empty_passwords
  - no_reboot_needed

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

PAM_PATH="/etc/pam.d/"
NULLOK_FILES=$(grep -rl ".*pam_unix\\.so.*nullok.*" ${PAM_PATH})
for FILE in ${NULLOK_FILES}; do
   sed --follow-symlinks -i 's/\<nullok\>//g' ${FILE}
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Restrict Root Logins   Group contains 2 rules
[ref]   Direct root logins should be allowed only for emergency use. In normal situations, the administrator should access the system via a unique unprivileged account, and then use su or sudo to execute privileged commands. Discouraging administrators from accessing the root account directly ensures an audit trail in organizations with multiple administrators. Locking down the channels through which root can connect directly also reduces opportunities for password-guessing against the root account. The login program uses the file /etc/securetty to determine which interfaces should allow root logins. The virtual devices /dev/console and /dev/tty* represent the system consoles (accessible via the Ctrl-Alt-F1 through Ctrl-Alt-F6 keyboard sequences on a default installation). The default securetty file also contains /dev/vc/*. These are likely to be deprecated in most environments, but may be retained for compatibility. Root should also be prohibited from connecting via network protocols. Other sections of this document include guidance describing how to prevent root from logging in via SSH.

Rule   Ensure the Group Used by pam_wheel.so Module Exists on System and is Empty   [ref]

Ensure that the group sugroup referenced by var_pam_wheel_group_for_su variable and used as value for the pam_wheel.so group option exists and has no members. This empty group used by pam_wheel.so in /etc/pam.d/su ensures that no user can run commands with altered privileges through the su command.
Warning:  Note that this rule just ensures the group exists and has no members. This rule does not configure pam_wheel.so module. The pam_wheel.so module configuration is accomplished by use_pam_wheel_group_for_su rule.
Rationale:
The su program allows to run commands with a substitute user and group ID. It is commonly used to run commands as the root user. Limiting access to such command is considered a good security practice.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_ensure_pam_wheel_group_empty
Identifiers:

CCE-92353-2

References:
cis5.6
pcidss42.2.6

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92353-2
  - PCI-DSSv4-2.2.6
  - ensure_pam_wheel_group_empty
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_pam_wheel_group_for_su # promote to variable
  set_fact:
    var_pam_wheel_group_for_su: !!str sugroup
  tags:
    - always

- name: Ensure the Group Used by pam_wheel.so Module Exists on System and is Empty
    - Ensure {{ var_pam_wheel_group_for_su }} Group Exists
  ansible.builtin.group:
    name: '{{ var_pam_wheel_group_for_su }}'
    state: present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-92353-2
  - PCI-DSSv4-2.2.6
  - ensure_pam_wheel_group_empty
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Group Used by pam_wheel.so Module Exists on System and is Empty
    - Ensure {{ var_pam_wheel_group_for_su }} Group is Empty
  ansible.builtin.lineinfile:
    path: /etc/group
    regexp: ^({{ var_pam_wheel_group_for_su }}:[^:]+:[0-9]+:).*$
    line: \1
    backrefs: true
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-92353-2
  - PCI-DSSv4-2.2.6
  - ensure_pam_wheel_group_empty
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_pam_wheel_group_for_su='sugroup'


if ! grep -q "^${var_pam_wheel_group_for_su}:[^:]*:[^:]*:[^:]*" /etc/group; then
    groupadd ${var_pam_wheel_group_for_su}
fi

# group must be empty
gpasswd -M '' ${var_pam_wheel_group_for_su}

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enforce Usage of pam_wheel with Group Parameter for su Authentication   [ref]

To ensure that only users who are members of the group set in the group option of pam_wheel.so module can run commands with altered privileges through the su command, make sure that the following line exists in the file /etc/pam.d/su:
auth required pam_wheel.so use_uid group=sugroup
         
Warning:  Note that ensure_pam_wheel_group_empty rule complements this requirement by ensuring the referenced group exists and has no members.
Rationale:
The su program allows to run commands with a substitute user and group ID. It is commonly used to run commands as the root user. Limiting access to such command is considered a good security practice.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_use_pam_wheel_group_for_su
Identifiers:

CCE-92351-6

References:
cis5.6
pcidss42.2.6

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92351-6
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - use_pam_wheel_group_for_su
- name: XCCDF Value var_pam_wheel_group_for_su # promote to variable
  set_fact:
    var_pam_wheel_group_for_su: !!str sugroup
  tags:
    - always

- name: Enforce Usage of pam_wheel with Group Parameter for su Authentication - Add
    the group to the /etc/pam.d/su file
  ansible.builtin.lineinfile:
    path: /etc/pam.d/su
    state: present
    regexp: ^[\s]*#[\s]*auth[\s]+required[\s]+pam_wheel\.so[\s]+use_uid group=$
    line: auth             required        pam_wheel.so use_uid group={{ var_pam_wheel_group_for_su
      }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-92351-6
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - use_pam_wheel_group_for_su

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_pam_wheel_group_for_su='sugroup'


PAM_CONF=/etc/pam.d/su

pamstr=$(grep -P '^auth\s+required\s+pam_wheel\.so\s+(?=[^#]*\buse_uid\b)(?=[^#]*\bgroup=)' ${PAM_CONF})
if [ -z "$pamstr" ]; then
    sed -Ei '/^auth\b.*\brequired\b.*\bpam_wheel\.so/d' ${PAM_CONF} # remove any remaining uncommented pam_wheel.so line
    sed -Ei "/^auth\s+sufficient\s+pam_rootok\.so.*$/a auth             required        pam_wheel.so use_uid group=${var_pam_wheel_group_for_su}" ${PAM_CONF}
else
    group_val=$(echo -n "$pamstr" | grep -Eo '\bgroup=[_a-z][-0-9_a-z]*' | cut -d '=' -f 2)
    if [ -z "${group_val}" ] || [ ${group_val} != ${var_pam_wheel_group_for_su} ]; then
        sed -Ei "s/(^auth\s+required\s+pam_wheel.so\s+[^#]*group=)[_a-z][-0-9_a-z]*/\1${var_pam_wheel_group_for_su}/" ${PAM_CONF}
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure All Groups on the System Have Unique Group ID   [ref]

Change the group name or delete groups, so each has a unique id.
Warning:  Automatic remediation of this control is not available due to the unique requirements of each system.
Rationale:
To assure accountability and prevent unauthenticated access, groups must be identified uniquely to prevent potential misuse and compromise of the system.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_group_unique_id
Identifiers:

CCE-92206-2

References:
disaCCI-000764
os-srgSRG-OS-000104-GPOS-00051
cis6.2.15
pcidss48.2.1

Rule   Ensure All Groups on the System Have Unique Group Names   [ref]

Change the group name or delete groups, so each has a unique name.
Warning:  Automatic remediation of this control is not available due to the unique requirements of each system.
Rationale:
To assure accountability and prevent unauthenticated access, groups must be identified uniquely to prevent potential misuse and compromise of the system.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_group_unique_name
Identifiers:

CCE-92207-0

References:
cis6.2.17
pcidss48.2.1
Group   GRUB2 bootloader configuration   Group contains 1 group and 2 rules
[ref]   During the boot process, the boot loader is responsible for starting the execution of the kernel and passing options to it. The boot loader allows for the selection of different kernels - possibly on different partitions or media. The default SUSE Linux Enterprise 12 boot loader for x86 systems is called GRUB2. Options it can pass to the kernel include single-user mode, which provides root access without any authentication, and the ability to disable SELinux. To prevent local users from modifying the boot parameters and endangering security, protect the boot loader configuration with a password and ensure its configuration file's permissions are set properly.
Group   Non-UEFI GRUB2 bootloader configuration   Group contains 2 rules
[ref]   Non-UEFI GRUB2 bootloader configuration

Rule   Verify /boot/grub2/grub.cfg Group Ownership   [ref]

The file /boot/grub2/grub.cfg should be group-owned by the root group to prevent destruction or modification of the file. To properly set the group owner of /boot/grub2/grub.cfg, run the command:
$ sudo chgrp root /boot/grub2/grub.cfg
Rationale:
The root group is a highly-privileged group. Furthermore, the group-owner of this file should not have any access privileges anyway.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_grub2_cfg
Identifiers:

CCE-91623-9

References:
cis-csc12, 13, 14, 15, 16, 18, 3, 5
cjis5.5.2.2
cobit5APO01.06, DSS05.04, DSS05.07, DSS06.02
cui3.4.5
disaCCI-000225
hipaa164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-20094.3.3.7.3
isa-62443-2013SR 2.1, SR 5.2
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nistCM-6(a), AC-6(1)
nist-csfPR.AC-4, PR.DS-5
pcidssReq-7.1
os-srgSRG-OS-000480-GPOS-00227
cis1.5.2
anssiR29
pcidss42.2.6

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91623-9
  - CJIS-5.5.2.2
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-7.1
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Test for existence /boot/grub2/grub.cfg
  stat:
    path: /boot/grub2/grub.cfg
  register: file_exists
  when:
  - '"/boot/efi" not in ansible_mounts | map(attribute="mount") | list'
  - '"grub2" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91623-9
  - CJIS-5.5.2.2
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-7.1
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /boot/grub2/grub.cfg
  file:
    path: /boot/grub2/grub.cfg
    group: '0'
  when:
  - '"/boot/efi" not in ansible_mounts | map(attribute="mount") | list'
  - '"grub2" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91623-9
  - CJIS-5.5.2.2
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-7.1
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -d /sys/firmware/efi ] && rpm --quiet -q grub2 && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

chgrp 0 /boot/grub2/grub.cfg

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify /boot/grub2/grub.cfg User Ownership   [ref]

The file /boot/grub2/grub.cfg should be owned by the root user to prevent destruction or modification of the file. To properly set the owner of /boot/grub2/grub.cfg, run the command:
$ sudo chown root /boot/grub2/grub.cfg 
Rationale:
Only root should be able to modify important boot parameters.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_grub2_cfg
Identifiers:

CCE-91624-7

References:
cis-csc12, 13, 14, 15, 16, 18, 3, 5
cjis5.5.2.2
cobit5APO01.06, DSS05.04, DSS05.07, DSS06.02
cui3.4.5
disaCCI-000225
hipaa164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-20094.3.3.7.3
isa-62443-2013SR 2.1, SR 5.2
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nistCM-6(a), AC-6(1)
nist-csfPR.AC-4, PR.DS-5
pcidssReq-7.1
os-srgSRG-OS-000480-GPOS-00227
cis1.5.2
anssiR29
pcidss42.2.6

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91624-7
  - CJIS-5.5.2.2
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-7.1
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Test for existence /boot/grub2/grub.cfg
  stat:
    path: /boot/grub2/grub.cfg
  register: file_exists
  when:
  - '"/boot/efi" not in ansible_mounts | map(attribute="mount") | list'
  - '"grub2" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91624-7
  - CJIS-5.5.2.2
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-7.1
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /boot/grub2/grub.cfg
  file:
    path: /boot/grub2/grub.cfg
    owner: '0'
  when:
  - '"/boot/efi" not in ansible_mounts | map(attribute="mount") | list'
  - '"grub2" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91624-7
  - CJIS-5.5.2.2
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-7.1
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -d /sys/firmware/efi ] && rpm --quiet -q grub2 && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

chown 0 /boot/grub2/grub.cfg

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Configure Syslog   Group contains 2 groups and 6 rules
[ref]   The syslog service has been the default Unix logging mechanism for many years. It has a number of downsides, including inconsistent log format, lack of authentication for received messages, and lack of authentication, encryption, or reliable transport for messages sent over a network. However, due to its long history, syslog is a de facto standard which is supported by almost all Unix applications.

In SUSE Linux Enterprise 12, rsyslog has replaced ksyslogd as the syslog daemon of choice, and it includes some additional security features such as reliable, connection-oriented (i.e. TCP) transmission of logs, the option to log to database formats, and the encryption of log data en route to a central logging server. This section discusses how to configure rsyslog for best effect, and how to use tools provided with the system to maintain and monitor logs.
Group   Ensure Proper Configuration of Log Files   Group contains 3 rules
[ref]   The file /etc/rsyslog.conf controls where log message are written. These are controlled by lines called rules, which consist of a selector and an action. These rules are often customized depending on the role of the system, the requirements of the environment, and whatever may enable the administrator to most effectively make use of log data. The default rules in SUSE Linux Enterprise 12 are:
*.info;mail.none;authpriv.none;cron.none                /var/log/messages
authpriv.*                                              /var/log/secure
mail.*                                                  -/var/log/maillog
cron.*                                                  /var/log/cron
*.emerg                                                 *
uucp,news.crit                                          /var/log/spooler
local7.*                                                /var/log/boot.log
See the man page rsyslog.conf(5) for more information. Note that the rsyslog daemon can be configured to use a timestamp format that some log processing programs may not understand. If this occurs, edit the file /etc/rsyslog.conf and add or edit the following line:
$ ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat

Rule   Ensure Log Files Are Owned By Appropriate Group   [ref]

The group-owner of all log files written by rsyslog should be root. These log files are determined by the second part of each Rule line in /etc/rsyslog.conf and typically all appear in /var/log. For each log file LOGFILE referenced in /etc/rsyslog.conf, run the following command to inspect the file's group owner:
$ ls -l LOGFILE
        
If the owner is not root, run the following command to correct this:
$ sudo chgrp root LOGFILE
        
Rationale:
The log files generated by rsyslog contain valuable information regarding system configuration, user authentication, and other such information. Log files should be protected from unauthorized access.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_rsyslog_files_groupownership
Identifiers:

CCE-91508-2

References:
cis-csc12, 13, 14, 15, 16, 18, 3, 5
cobit5APO01.06, DSS05.04, DSS05.07, DSS06.02
disaCCI-001314
isa-62443-20094.3.3.7.3
isa-62443-2013SR 2.1, SR 5.2
ism0988, 1405
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistCM-6(a), AC-6(1)
nist-csfPR.AC-4, PR.DS-5
pcidssReq-10.5.1, Req-10.5.2
cis4.2.1.3
anssiR71
pcidss410.3.2

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Ensure Log Files Are Owned By Appropriate Group - Set rsyslog logfile configuration
    facts
  ansible.builtin.set_fact:
    rsyslog_etc_config: /etc/rsyslog.conf
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91508-2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - Get IncludeConfig directive
  ansible.builtin.shell: |
    set -o pipefail
    grep -e '$IncludeConfig' {{ rsyslog_etc_config }} | cut -d ' ' -f 2 || true
  register: rsyslog_old_inc
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91508-2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - Get include files directives
  ansible.builtin.shell: |
    set -o pipefail
    awk '/)/{f=0} /include\(/{f=1} f{ nf=gensub("^(include\\(|\\s*)file=\"(\\S+)\".*","\\2",1); if($0!=nf){ print nf }}' {{ rsyslog_etc_config }} || true
  register: rsyslog_new_inc
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91508-2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - Aggregate rsyslog includes
  ansible.builtin.set_fact:
    include_config_output: '{{ rsyslog_old_inc.stdout_lines + rsyslog_new_inc.stdout_lines
      }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_old_inc is not skipped and rsyslog_new_inc is not skipped
  tags:
  - CCE-91508-2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - List all config files
  ansible.builtin.find:
    paths: '{{ item | dirname }}'
    patterns: '{{ item | basename }}'
    hidden: false
    follow: true
  loop: '{{ include_config_output | list + [rsyslog_etc_config] }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - include_config_output is defined
  register: rsyslog_config_files
  failed_when: false
  changed_when: false
  tags:
  - CCE-91508-2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - Extract log files old format
  ansible.builtin.shell: |
    set -o pipefail
    grep -oP '^[^(\s|#|\$)]+[\s]+.*[\s]+-?(/+[^:;\s]+);*\.*$' {{ item.1.path }} | \
    awk '{print $NF}' | \
    sed -e 's/^-//' || true
  loop: '{{ rsyslog_config_files.results | default([]) | subelements(''files'') }}'
  register: log_files_old
  changed_when: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_config_files is not skipped
  tags:
  - CCE-91508-2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - Extract log files new format
  ansible.builtin.shell: |
    set -o pipefail
    grep -ozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" {{ item.1.path }} | \
    grep -aoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)" | \
    grep -oE "\"([/[:alnum:][:punct:]]*)\"" | \
    tr -d "\""|| true
  loop: '{{ rsyslog_config_files.results | default([]) | subelements(''files'') }}'
  register: log_files_new
  changed_when: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_config_files is not skipped
  tags:
  - CCE-91508-2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - Sum all log files found
  ansible.builtin.set_fact:
    log_files: '{{ log_files_new.results | map(attribute=''stdout_lines'') | list
      | flatten | unique + log_files_old.results | map(attribute=''stdout_lines'')
      | list | flatten | unique }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91508-2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group -Setup log files attribute
  ansible.builtin.file:
    path: '{{ item }}'
    group: root
    state: file
  loop: '{{ log_files | list | flatten | unique }}'
  failed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91508-2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# List of log file paths to be inspected for correct permissions
# * Primarily inspect log file paths listed in /etc/rsyslog.conf
RSYSLOG_ETC_CONFIG="/etc/rsyslog.conf"
# * And also the log file paths listed after rsyslog's $IncludeConfig directive
#   (store the result into array for the case there's shell glob used as value of IncludeConfig)
readarray -t OLD_INC < <(grep -e "\$IncludeConfig[[:space:]]\+[^[:space:];]\+" /etc/rsyslog.conf | cut -d ' ' -f 2)
readarray -t RSYSLOG_INCLUDE_CONFIG < <(for INCPATH in "${OLD_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)
readarray -t NEW_INC < <(sed -n '/^\s*include(/,/)/Ip' /etc/rsyslog.conf | sed -n 's@.*file\s*=\s*"\([/[:alnum:][:punct:]]*\)".*@\1@Ip')
readarray -t RSYSLOG_INCLUDE < <(for INCPATH in "${NEW_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)

# Declare an array to hold the final list of different log file paths
declare -a LOG_FILE_PATHS

# Array to hold all rsyslog config entries
RSYSLOG_CONFIGS=()
RSYSLOG_CONFIGS=("${RSYSLOG_ETC_CONFIG}" "${RSYSLOG_INCLUDE_CONFIG[@]}" "${RSYSLOG_INCLUDE[@]}")

# Get full list of files to be checked
# RSYSLOG_CONFIGS may contain globs such as
# /etc/rsyslog.d/*.conf /etc/rsyslog.d/*.frule
# So, loop over the entries in RSYSLOG_CONFIGS and use find to get the list of included files.
RSYSLOG_CONFIG_FILES=()
for ENTRY in "${RSYSLOG_CONFIGS[@]}"
do
	# If directory, rsyslog will search for config files in recursively.
	# However, files in hidden sub-directories or hidden files will be ignored.
	if [ -d "${ENTRY}" ]
	then
		readarray -t FINDOUT < <(find "${ENTRY}" -not -path '*/.*' -type f)
		RSYSLOG_CONFIG_FILES+=("${FINDOUT[@]}")
	elif [ -f "${ENTRY}" ]
	then
		RSYSLOG_CONFIG_FILES+=("${ENTRY}")
	else
		echo "Invalid include object: ${ENTRY}"
	fi
done

# Browse each file selected above as containing paths of log files
# ('/etc/rsyslog.conf' and '/etc/rsyslog.d/*.conf' in the default configuration)
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	# From each of these files extract just particular log file path(s), thus:
	# * Ignore lines starting with space (' '), comment ('#"), or variable syntax ('$') characters,
	# * Ignore empty lines,
	# * Strip quotes and closing brackets from paths.
	# * Ignore paths that match /dev|/etc.*\.conf, as those are paths, but likely not log files
	# * From the remaining valid rows select only fields constituting a log file path
	# Text file column is understood to represent a log file path if and only if all of the
	# following are met:
	# * it contains at least one slash '/' character,
	# * it is preceded by space
	# * it doesn't contain space (' '), colon (':'), and semicolon (';') characters
	# Search log file for path(s) only in case it exists!
	if [[ -f "${LOG_FILE}" ]]
	then
		NORMALIZED_CONFIG_FILE_LINES=$(sed -e "/^[#|$]/d" "${LOG_FILE}")
		LINES_WITH_PATHS=$(grep '[^/]*\s\+\S*/\S\+$' <<< "${NORMALIZED_CONFIG_FILE_LINES}")
		FILTERED_PATHS=$(awk '{if(NF>=2&&($NF~/^\//||$NF~/^-\//)){sub(/^-\//,"/",$NF);print $NF}}' <<< "${LINES_WITH_PATHS}")
		CLEANED_PATHS=$(sed -e "s/[\"')]//g; /\\/etc.*\.conf/d; /\\/dev\\//d" <<< "${FILTERED_PATHS}")
		MATCHED_ITEMS=$(sed -e "/^$/d" <<< "${CLEANED_PATHS}")
		# Since above sed command might return more than one item (delimited by newline), split
		# the particular matches entries into new array specific for this log file
		readarray -t ARRAY_FOR_LOG_FILE <<< "$MATCHED_ITEMS"
		# Concatenate the two arrays - previous content of $LOG_FILE_PATHS array with
		# items from newly created array for this log file
		LOG_FILE_PATHS+=("${ARRAY_FOR_LOG_FILE[@]}")
		# Delete the temporary array
		unset ARRAY_FOR_LOG_FILE
	fi
done

# Check for RainerScript action log format which might be also multiline so grep regex is a bit
# curly:
# extract possibly multiline action omfile expressions
# extract File="logfile" expression
# match only "logfile" expression
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	ACTION_OMFILE_LINES=$(grep -iozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" "${LOG_FILE}")
	OMFILE_LINES=$(echo "${ACTION_OMFILE_LINES}"| grep -iaoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)")
	LOG_FILE_PATHS+=("$(echo "${OMFILE_LINES}"| grep -oE "\"([/[:alnum:][:punct:]]*)\""|tr -d "\"")")
done

# Ensure the correct attribute if file exists
FILE_CMD="chgrp"
for LOG_FILE_PATH in "${LOG_FILE_PATHS[@]}"
do
	# Sanity check - if particular $LOG_FILE_PATH is empty string, skip it from further processing
	if [ -z "$LOG_FILE_PATH" ]
	then
		continue
	fi
	$FILE_CMD "root" "$LOG_FILE_PATH"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure Log Files Are Owned By Appropriate User   [ref]

The owner of all log files written by rsyslog should be root. These log files are determined by the second part of each Rule line in /etc/rsyslog.conf and typically all appear in /var/log. For each log file LOGFILE referenced in /etc/rsyslog.conf, run the following command to inspect the file's owner:
$ ls -l LOGFILE
        
If the owner is not root, run the following command to correct this:
$ sudo chown root LOGFILE
        
Rationale:
The log files generated by rsyslog contain valuable information regarding system configuration, user authentication, and other such information. Log files should be protected from unauthorized access.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_rsyslog_files_ownership
Identifiers:

CCE-91509-0

References:
cis-csc12, 13, 14, 15, 16, 18, 3, 5
cobit5APO01.06, DSS05.04, DSS05.07, DSS06.02
disaCCI-001314
isa-62443-20094.3.3.7.3
isa-62443-2013SR 2.1, SR 5.2
ism0988, 1405
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistCM-6(a), AC-6(1)
nist-csfPR.AC-4, PR.DS-5
pcidssReq-10.5.1, Req-10.5.2
cis4.2.1.3
anssiR71
pcidss410.3.2

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Ensure Log Files Are Owned By Appropriate User - Set rsyslog logfile configuration
    facts
  ansible.builtin.set_fact:
    rsyslog_etc_config: /etc/rsyslog.conf
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91509-0
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - Get IncludeConfig directive
  ansible.builtin.shell: |
    set -o pipefail
    grep -e '$IncludeConfig' {{ rsyslog_etc_config }} | cut -d ' ' -f 2 || true
  register: rsyslog_old_inc
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91509-0
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - Get include files directives
  ansible.builtin.shell: |
    set -o pipefail
    awk '/)/{f=0} /include\(/{f=1} f{ nf=gensub("^(include\\(|\\s*)file=\"(\\S+)\".*","\\2",1); if($0!=nf){ print nf }}' {{ rsyslog_etc_config }} || true
  register: rsyslog_new_inc
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91509-0
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - Aggregate rsyslog includes
  ansible.builtin.set_fact:
    include_config_output: '{{ rsyslog_old_inc.stdout_lines + rsyslog_new_inc.stdout_lines
      }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_old_inc is not skipped and rsyslog_new_inc is not skipped
  tags:
  - CCE-91509-0
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - List all config files
  ansible.builtin.find:
    paths: '{{ item | dirname }}'
    patterns: '{{ item | basename }}'
    hidden: false
    follow: true
  loop: '{{ include_config_output | list + [rsyslog_etc_config] }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - include_config_output is defined
  register: rsyslog_config_files
  failed_when: false
  changed_when: false
  tags:
  - CCE-91509-0
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - Extract log files old format
  ansible.builtin.shell: |
    set -o pipefail
    grep -oP '^[^(\s|#|\$)]+[\s]+.*[\s]+-?(/+[^:;\s]+);*\.*$' {{ item.1.path }} | \
    awk '{print $NF}' | \
    sed -e 's/^-//' || true
  loop: '{{ rsyslog_config_files.results | default([]) | subelements(''files'') }}'
  register: log_files_old
  changed_when: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_config_files is not skipped
  tags:
  - CCE-91509-0
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - Extract log files new format
  ansible.builtin.shell: |
    set -o pipefail
    grep -ozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" {{ item.1.path }} | \
    grep -aoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)" | \
    grep -oE "\"([/[:alnum:][:punct:]]*)\"" | \
    tr -d "\""|| true
  loop: '{{ rsyslog_config_files.results | default([]) | subelements(''files'') }}'
  register: log_files_new
  changed_when: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_config_files is not skipped
  tags:
  - CCE-91509-0
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - Sum all log files found
  ansible.builtin.set_fact:
    log_files: '{{ log_files_new.results | map(attribute=''stdout_lines'') | list
      | flatten | unique + log_files_old.results | map(attribute=''stdout_lines'')
      | list | flatten | unique }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91509-0
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User -Setup log files attribute
  ansible.builtin.file:
    path: '{{ item }}'
    owner: root
    state: file
  loop: '{{ log_files | list | flatten | unique }}'
  failed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91509-0
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# List of log file paths to be inspected for correct permissions
# * Primarily inspect log file paths listed in /etc/rsyslog.conf
RSYSLOG_ETC_CONFIG="/etc/rsyslog.conf"
# * And also the log file paths listed after rsyslog's $IncludeConfig directive
#   (store the result into array for the case there's shell glob used as value of IncludeConfig)
readarray -t OLD_INC < <(grep -e "\$IncludeConfig[[:space:]]\+[^[:space:];]\+" /etc/rsyslog.conf | cut -d ' ' -f 2)
readarray -t RSYSLOG_INCLUDE_CONFIG < <(for INCPATH in "${OLD_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)
readarray -t NEW_INC < <(sed -n '/^\s*include(/,/)/Ip' /etc/rsyslog.conf | sed -n 's@.*file\s*=\s*"\([/[:alnum:][:punct:]]*\)".*@\1@Ip')
readarray -t RSYSLOG_INCLUDE < <(for INCPATH in "${NEW_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)

# Declare an array to hold the final list of different log file paths
declare -a LOG_FILE_PATHS

# Array to hold all rsyslog config entries
RSYSLOG_CONFIGS=()
RSYSLOG_CONFIGS=("${RSYSLOG_ETC_CONFIG}" "${RSYSLOG_INCLUDE_CONFIG[@]}" "${RSYSLOG_INCLUDE[@]}")

# Get full list of files to be checked
# RSYSLOG_CONFIGS may contain globs such as
# /etc/rsyslog.d/*.conf /etc/rsyslog.d/*.frule
# So, loop over the entries in RSYSLOG_CONFIGS and use find to get the list of included files.
RSYSLOG_CONFIG_FILES=()
for ENTRY in "${RSYSLOG_CONFIGS[@]}"
do
	# If directory, rsyslog will search for config files in recursively.
	# However, files in hidden sub-directories or hidden files will be ignored.
	if [ -d "${ENTRY}" ]
	then
		readarray -t FINDOUT < <(find "${ENTRY}" -not -path '*/.*' -type f)
		RSYSLOG_CONFIG_FILES+=("${FINDOUT[@]}")
	elif [ -f "${ENTRY}" ]
	then
		RSYSLOG_CONFIG_FILES+=("${ENTRY}")
	else
		echo "Invalid include object: ${ENTRY}"
	fi
done

# Browse each file selected above as containing paths of log files
# ('/etc/rsyslog.conf' and '/etc/rsyslog.d/*.conf' in the default configuration)
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	# From each of these files extract just particular log file path(s), thus:
	# * Ignore lines starting with space (' '), comment ('#"), or variable syntax ('$') characters,
	# * Ignore empty lines,
	# * Strip quotes and closing brackets from paths.
	# * Ignore paths that match /dev|/etc.*\.conf, as those are paths, but likely not log files
	# * From the remaining valid rows select only fields constituting a log file path
	# Text file column is understood to represent a log file path if and only if all of the
	# following are met:
	# * it contains at least one slash '/' character,
	# * it is preceded by space
	# * it doesn't contain space (' '), colon (':'), and semicolon (';') characters
	# Search log file for path(s) only in case it exists!
	if [[ -f "${LOG_FILE}" ]]
	then
		NORMALIZED_CONFIG_FILE_LINES=$(sed -e "/^[#|$]/d" "${LOG_FILE}")
		LINES_WITH_PATHS=$(grep '[^/]*\s\+\S*/\S\+$' <<< "${NORMALIZED_CONFIG_FILE_LINES}")
		FILTERED_PATHS=$(awk '{if(NF>=2&&($NF~/^\//||$NF~/^-\//)){sub(/^-\//,"/",$NF);print $NF}}' <<< "${LINES_WITH_PATHS}")
		CLEANED_PATHS=$(sed -e "s/[\"')]//g; /\\/etc.*\.conf/d; /\\/dev\\//d" <<< "${FILTERED_PATHS}")
		MATCHED_ITEMS=$(sed -e "/^$/d" <<< "${CLEANED_PATHS}")
		# Since above sed command might return more than one item (delimited by newline), split
		# the particular matches entries into new array specific for this log file
		readarray -t ARRAY_FOR_LOG_FILE <<< "$MATCHED_ITEMS"
		# Concatenate the two arrays - previous content of $LOG_FILE_PATHS array with
		# items from newly created array for this log file
		LOG_FILE_PATHS+=("${ARRAY_FOR_LOG_FILE[@]}")
		# Delete the temporary array
		unset ARRAY_FOR_LOG_FILE
	fi
done

# Check for RainerScript action log format which might be also multiline so grep regex is a bit
# curly:
# extract possibly multiline action omfile expressions
# extract File="logfile" expression
# match only "logfile" expression
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	ACTION_OMFILE_LINES=$(grep -iozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" "${LOG_FILE}")
	OMFILE_LINES=$(echo "${ACTION_OMFILE_LINES}"| grep -iaoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)")
	LOG_FILE_PATHS+=("$(echo "${OMFILE_LINES}"| grep -oE "\"([/[:alnum:][:punct:]]*)\""|tr -d "\"")")
done

# Ensure the correct attribute if file exists
FILE_CMD="chown"
for LOG_FILE_PATH in "${LOG_FILE_PATHS[@]}"
do
	# Sanity check - if particular $LOG_FILE_PATH is empty string, skip it from further processing
	if [ -z "$LOG_FILE_PATH" ]
	then
		continue
	fi
	$FILE_CMD "root" "$LOG_FILE_PATH"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure System Log Files Have Correct Permissions   [ref]

The file permissions for all log files written by rsyslog should be set to 640, or more restrictive. These log files are determined by the second part of each Rule line in /etc/rsyslog.conf and typically all appear in /var/log. For each log file LOGFILE referenced in /etc/rsyslog.conf, run the following command to inspect the file's permissions:
$ ls -l LOGFILE
        
If the permissions are not 640 or more restrictive, run the following command to correct this:
$ sudo chmod 640 LOGFILE
        
"
Rationale:
Log files can contain valuable information regarding system configuration. If the system log files are not protected unauthorized users could change the logged data, eliminating their forensic value.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_rsyslog_files_permissions
Identifiers:

CCE-91510-8

References:
disaCCI-001314
ism0988, 1405
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistCM-6(a), AC-6(1)
pcidssReq-10.5.1, Req-10.5.2
cis4.2.1.3
anssiR71
pcidss410.3.1

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Ensure System Log Files Have Correct Permissions - Set rsyslog logfile configuration
    facts
  ansible.builtin.set_fact:
    rsyslog_etc_config: /etc/rsyslog.conf
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91510-8
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - Get IncludeConfig directive
  ansible.builtin.shell: |
    set -o pipefail
    grep -e '$IncludeConfig' {{ rsyslog_etc_config }} | cut -d ' ' -f 2 || true
  register: rsyslog_old_inc
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91510-8
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - Get include files directives
  ansible.builtin.shell: |
    set -o pipefail
    awk '/)/{f=0} /include\(/{f=1} f{ nf=gensub("^(include\\(|\\s*)file=\"(\\S+)\".*","\\2",1); if($0!=nf){ print nf }}' {{ rsyslog_etc_config }} || true
  register: rsyslog_new_inc
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91510-8
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - Aggregate rsyslog includes
  ansible.builtin.set_fact:
    include_config_output: '{{ rsyslog_old_inc.stdout_lines + rsyslog_new_inc.stdout_lines
      }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_old_inc is not skipped and rsyslog_new_inc is not skipped
  tags:
  - CCE-91510-8
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - List all config files
  ansible.builtin.find:
    paths: '{{ item | dirname }}'
    patterns: '{{ item | basename }}'
    hidden: false
    follow: true
  loop: '{{ include_config_output | list + [rsyslog_etc_config] }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - include_config_output is defined
  register: rsyslog_config_files
  failed_when: false
  changed_when: false
  tags:
  - CCE-91510-8
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - Extract log files old format
  ansible.builtin.shell: |
    set -o pipefail
    grep -oP '^[^(\s|#|\$)]+[\s]+.*[\s]+-?(/+[^:;\s]+);*\.*$' {{ item.1.path }} | \
    awk '{print $NF}' | \
    sed -e 's/^-//' || true
  loop: '{{ rsyslog_config_files.results | default([]) | subelements(''files'') }}'
  register: log_files_old
  changed_when: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_config_files is not skipped
  tags:
  - CCE-91510-8
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - Extract log files new format
  ansible.builtin.shell: |
    set -o pipefail
    grep -ozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" {{ item.1.path }} | \
    grep -aoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)" | \
    grep -oE "\"([/[:alnum:][:punct:]]*)\"" | \
    tr -d "\""|| true
  loop: '{{ rsyslog_config_files.results | default([]) | subelements(''files'') }}'
  register: log_files_new
  changed_when: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_config_files is not skipped
  tags:
  - CCE-91510-8
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - Sum all log files found
  ansible.builtin.set_fact:
    log_files: '{{ log_files_new.results | map(attribute=''stdout_lines'') | list
      | flatten | unique + log_files_old.results | map(attribute=''stdout_lines'')
      | list | flatten | unique }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91510-8
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions -Setup log files attribute
  ansible.builtin.file:
    path: '{{ item }}'
    mode: '0640'
    state: file
  loop: '{{ log_files | list | flatten | unique }}'
  failed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91510-8
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# List of log file paths to be inspected for correct permissions
# * Primarily inspect log file paths listed in /etc/rsyslog.conf
RSYSLOG_ETC_CONFIG="/etc/rsyslog.conf"
# * And also the log file paths listed after rsyslog's $IncludeConfig directive
#   (store the result into array for the case there's shell glob used as value of IncludeConfig)
readarray -t OLD_INC < <(grep -e "\$IncludeConfig[[:space:]]\+[^[:space:];]\+" /etc/rsyslog.conf | cut -d ' ' -f 2)
readarray -t RSYSLOG_INCLUDE_CONFIG < <(for INCPATH in "${OLD_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)
readarray -t NEW_INC < <(sed -n '/^\s*include(/,/)/Ip' /etc/rsyslog.conf | sed -n 's@.*file\s*=\s*"\([/[:alnum:][:punct:]]*\)".*@\1@Ip')
readarray -t RSYSLOG_INCLUDE < <(for INCPATH in "${NEW_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)

# Declare an array to hold the final list of different log file paths
declare -a LOG_FILE_PATHS

# Array to hold all rsyslog config entries
RSYSLOG_CONFIGS=()
RSYSLOG_CONFIGS=("${RSYSLOG_ETC_CONFIG}" "${RSYSLOG_INCLUDE_CONFIG[@]}" "${RSYSLOG_INCLUDE[@]}")

# Get full list of files to be checked
# RSYSLOG_CONFIGS may contain globs such as
# /etc/rsyslog.d/*.conf /etc/rsyslog.d/*.frule
# So, loop over the entries in RSYSLOG_CONFIGS and use find to get the list of included files.
RSYSLOG_CONFIG_FILES=()
for ENTRY in "${RSYSLOG_CONFIGS[@]}"
do
	# If directory, rsyslog will search for config files in recursively.
	# However, files in hidden sub-directories or hidden files will be ignored.
	if [ -d "${ENTRY}" ]
	then
		readarray -t FINDOUT < <(find "${ENTRY}" -not -path '*/.*' -type f)
		RSYSLOG_CONFIG_FILES+=("${FINDOUT[@]}")
	elif [ -f "${ENTRY}" ]
	then
		RSYSLOG_CONFIG_FILES+=("${ENTRY}")
	else
		echo "Invalid include object: ${ENTRY}"
	fi
done

# Browse each file selected above as containing paths of log files
# ('/etc/rsyslog.conf' and '/etc/rsyslog.d/*.conf' in the default configuration)
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	# From each of these files extract just particular log file path(s), thus:
	# * Ignore lines starting with space (' '), comment ('#"), or variable syntax ('$') characters,
	# * Ignore empty lines,
	# * Strip quotes and closing brackets from paths.
	# * Ignore paths that match /dev|/etc.*\.conf, as those are paths, but likely not log files
	# * From the remaining valid rows select only fields constituting a log file path
	# Text file column is understood to represent a log file path if and only if all of the
	# following are met:
	# * it contains at least one slash '/' character,
	# * it is preceded by space
	# * it doesn't contain space (' '), colon (':'), and semicolon (';') characters
	# Search log file for path(s) only in case it exists!
	if [[ -f "${LOG_FILE}" ]]
	then
		NORMALIZED_CONFIG_FILE_LINES=$(sed -e "/^[#|$]/d" "${LOG_FILE}")
		LINES_WITH_PATHS=$(grep '[^/]*\s\+\S*/\S\+$' <<< "${NORMALIZED_CONFIG_FILE_LINES}")
		FILTERED_PATHS=$(awk '{if(NF>=2&&($NF~/^\//||$NF~/^-\//)){sub(/^-\//,"/",$NF);print $NF}}' <<< "${LINES_WITH_PATHS}")
		CLEANED_PATHS=$(sed -e "s/[\"')]//g; /\\/etc.*\.conf/d; /\\/dev\\//d" <<< "${FILTERED_PATHS}")
		MATCHED_ITEMS=$(sed -e "/^$/d" <<< "${CLEANED_PATHS}")
		# Since above sed command might return more than one item (delimited by newline), split
		# the particular matches entries into new array specific for this log file
		readarray -t ARRAY_FOR_LOG_FILE <<< "$MATCHED_ITEMS"
		# Concatenate the two arrays - previous content of $LOG_FILE_PATHS array with
		# items from newly created array for this log file
		LOG_FILE_PATHS+=("${ARRAY_FOR_LOG_FILE[@]}")
		# Delete the temporary array
		unset ARRAY_FOR_LOG_FILE
	fi
done

# Check for RainerScript action log format which might be also multiline so grep regex is a bit
# curly:
# extract possibly multiline action omfile expressions
# extract File="logfile" expression
# match only "logfile" expression
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	ACTION_OMFILE_LINES=$(grep -iozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" "${LOG_FILE}")
	OMFILE_LINES=$(echo "${ACTION_OMFILE_LINES}"| grep -iaoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)")
	LOG_FILE_PATHS+=("$(echo "${OMFILE_LINES}"| grep -oE "\"([/[:alnum:][:punct:]]*)\""|tr -d "\"")")
done

# Ensure the correct attribute if file exists
FILE_CMD="chmod"
for LOG_FILE_PATH in "${LOG_FILE_PATHS[@]}"
do
	# Sanity check - if particular $LOG_FILE_PATH is empty string, skip it from further processing
	if [ -z "$LOG_FILE_PATH" ]
	then
		continue
	fi
	$FILE_CMD "0640" "$LOG_FILE_PATH"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Ensure All Logs are Rotated by logrotate   Group contains 3 rules
[ref]   Edit the file /etc/logrotate.d/syslog. Find the first line, which should look like this (wrapped for clarity):
/var/log/messages /var/log/secure /var/log/maillog /var/log/spooler \
  /var/log/boot.log /var/log/cron {
Edit this line so that it contains a one-space-separated listing of each log file referenced in /etc/rsyslog.conf.

All logs in use on a system must be rotated regularly, or the log files will consume disk space over time, eventually interfering with system operation. The file /etc/logrotate.d/syslog is the configuration file used by the logrotate program to maintain all log files written by syslog. By default, it rotates logs weekly and stores four archival copies of each log. These settings can be modified by editing /etc/logrotate.conf, but the defaults are sufficient for purposes of this guide.

Note that logrotate is run nightly by the cron job /etc/cron.daily/logrotate. If particularly active logs need to be rotated more often than once a day, some other mechanism must be used.

Rule   Ensure logrotate is Installed   [ref]

logrotate is installed by default. The logrotate package can be installed with the following command:
 $ sudo zypper install logrotate
Rationale:
The logrotate package provides the logrotate services.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_logrotate_installed
Identifiers:

CCE-92386-2

References:
cis-csc1, 14, 15, 16, 3, 5, 6
cobit5APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01
disaCCI-000366
isa-62443-20094.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4
isa-62443-2013SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9
iso27001-2013A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1
nistCM-6(a)
nist-csfPR.PT-1
pcidssReq-10.7
cis4.2.4
anssiR71
pcidss410.5.1


[[packages]]
name = "logrotate"
version = "*"

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Ensure logrotate is installed
  package:
    name: logrotate
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92386-2
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - PCI-DSSv4-10.5.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_logrotate_installed

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

zypper install -y "logrotate"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include install_logrotate

class install_logrotate {
  package { 'logrotate':
    ensure => 'installed',
  }
}

Rule   Ensure Logrotate Runs Periodically   [ref]

The logrotate utility allows for the automatic rotation of log files. The frequency of rotation is specified in /etc/logrotate.conf, which triggers a cron task or a timer. To configure logrotate to run daily, add or correct the following line in /etc/logrotate.conf:
# rotate log files frequency
daily
Rationale:
Log files that are not properly rotated run the risk of growing so large that they fill up the /var/log partition. Valuable logging information could be lost if the /var/log partition becomes full.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_ensure_logrotate_activated
Identifiers:

CCE-91511-6

References:
cis-csc1, 14, 15, 16, 3, 5, 6
cobit5APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01
disaCCI-000366
isa-62443-20094.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4
isa-62443-2013SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9
iso27001-2013A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1
nistCM-6(a)
nist-csfPR.PT-1
pcidssReq-10.7
cis4.2.4
anssiR71

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91511-6
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - configure_strategy
  - ensure_logrotate_activated
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Configure daily log rotation in /etc/logrotate.conf
  lineinfile:
    create: true
    dest: /etc/logrotate.conf
    regexp: ^daily$
    line: daily
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"logrotate" in ansible_facts.packages'
  tags:
  - CCE-91511-6
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - configure_strategy
  - ensure_logrotate_activated
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Make sure daily log rotation setting is not overriden in /etc/logrotate.conf
  lineinfile:
    create: false
    dest: /etc/logrotate.conf
    regexp: ^[\s]*(weekly|monthly|yearly)$
    state: absent
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"logrotate" in ansible_facts.packages'
  tags:
  - CCE-91511-6
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - configure_strategy
  - ensure_logrotate_activated
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Enable timer logrotate
  systemd:
    name: logrotate.timer
    enabled: 'yes'
    state: started
    masked: 'no'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"logrotate" in ansible_facts.packages'
  tags:
  - CCE-91511-6
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - configure_strategy
  - ensure_logrotate_activated
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q logrotate; }; then

LOGROTATE_CONF_FILE="/etc/logrotate.conf"

SYSTEMCTL_EXEC='/usr/bin/systemctl'


# daily rotation is configured
grep -q "^daily$" $LOGROTATE_CONF_FILE|| echo "daily" >> $LOGROTATE_CONF_FILE

# remove any line configuring weekly, monthly or yearly rotation
sed -i '/^\s*\(weekly\|monthly\|yearly\).*$/d' $LOGROTATE_CONF_FILE


# enable logrotate timer service
"$SYSTEMCTL_EXEC" unmask 'logrotate.timer'
"$SYSTEMCTL_EXEC" start 'logrotate.timer'
"$SYSTEMCTL_EXEC" enable 'logrotate.timer'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable logrotate Timer   [ref]

The logrotate timer can be enabled with the following command:
$ sudo systemctl enable logrotate.timer
Rationale:
Log files that are not properly rotated run the risk of growing so large that they fill up the /var/log partition. Valuable logging information could be lost if the /var/log partition becomes full.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_timer_logrotate_enabled
Identifiers:

CCE-92401-9

References:
cis-csc1, 14, 15, 16, 3, 5, 6
cobit5APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01
disaCCI-000366
isa-62443-20094.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4
isa-62443-2013SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9
iso27001-2013A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1
nistCM-6(a)
nist-csfPR.PT-1
pcidssReq-10.7
cis4.2.4
anssiR71
pcidss410.5.1

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92401-9
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - PCI-DSSv4-10.5.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - timer_logrotate_enabled

- name: Enable timer logrotate
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Enable timer logrotate
    systemd:
      name: logrotate.timer
      enabled: 'yes'
      state: started
    when:
    - '"logrotate" in ansible_facts.packages'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"logrotate" in ansible_facts.packages'
  tags:
  - CCE-92401-9
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - PCI-DSSv4-10.5.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - timer_logrotate_enabled

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q logrotate; }; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" start 'logrotate.timer'
"$SYSTEMCTL_EXEC" enable 'logrotate.timer'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Network Configuration and Firewalls   Group contains 11 groups and 14 rules
[ref]   Most systems must be connected to a network of some sort, and this brings with it the substantial risk of network attack. This section discusses the security impact of decisions about networking which must be made when configuring a system.

This section also discusses firewalls, network access controls, and other network security frameworks, which allow system-level rules to be written that can limit an attackers' ability to connect to your system. These rules can specify that network traffic should be allowed or denied from certain IP addresses, hosts, and networks. The rules can also specify which of the system's network services are available to particular hosts or networks.
Group   IPSec Support   Group contains 1 rule
[ref]   Support for Internet Protocol Security (IPsec) is provided with Libreswan.

Rule   Install strongswan Package   [ref]

The Strongswan package provides an implementation of IPsec and IKE, which permits the creation of secure tunnels over untrusted networks. The strongswan package can be installed with the following command:
$ sudo zypper install strongswan
Rationale:
Providing the ability for remote users or systems to initiate a secure VPN connection protects information when it is transmitted over a wide area network.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_strongswan_installed
Identifiers:

CCE-91625-4

References:
cis-csc12, 15, 3, 5, 8
cobit5APO13.01, DSS01.04, DSS05.02, DSS05.03, DSS05.04
disaCCI-001130, CCI-001131
isa-62443-20094.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8
isa-62443-2013SR 1.13, SR 2.6, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
iso27001-2013A.11.2.4, A.11.2.6, A.13.1.1, A.13.2.1, A.14.1.3, A.15.1.1, A.15.2.1, A.6.2.1, A.6.2.2
nistCM-6(a)
nist-csfPR.AC-3, PR.MA-2, PR.PT-4
pcidssReq-4.1
os-srgSRG-OS-000480-GPOS-00227, SRG-OS-000120-GPOS-00061


[[packages]]
name = "strongswan"
version = "*"

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Ensure strongswan is installed
  package:
    name: strongswan
    state: present
  tags:
  - CCE-91625-4
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-4.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_strongswan_installed

Complexity:low
Disruption:low
Reboot:false
Strategy:enable

zypper install -y "strongswan"

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include install_strongswan

class install_strongswan {
  package { 'strongswan':
    ensure => 'installed',
  }
}
Group   iptables and ip6tables   Group contains 1 rule
[ref]   A host-based firewall called netfilter is included as part of the Linux kernel distributed with the system. It is activated by default. This firewall is controlled by the program iptables, and the entire capability is frequently referred to by this name. An analogous program called ip6tables handles filtering for IPv6.

Unlike TCP Wrappers, which depends on the network server program to support and respect the rules written, netfilter filtering occurs at the kernel level, before a program can even process the data from the network packet. As such, any program on the system is affected by the rules written.

This section provides basic information about strengthening the iptables and ip6tables configurations included with the system. For more complete information that may allow the construction of a sophisticated ruleset tailored to your environment, please consult the references at the end of this section.

Rule   Install iptables Package   [ref]

The iptables package can be installed with the following command:
$ sudo zypper install iptables
Rationale:
iptables controls the Linux kernel network packet filtering code. iptables allows system operators to set up firewalls and IP masquerading, etc.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_iptables_installed
Identifiers:

CCE-91549-6

References:
nistCM-6(a)
pcidssReq-1.4.1
os-srgSRG-OS-000480-GPOS-00227
cis3.5.1.1


[[packages]]
name = "iptables"
version = "*"

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
- name: Ensure iptables is installed
  package:
    name: iptables
    state: present
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] )
  tags:
  - CCE-91549-6
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-1.4.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_iptables_installed

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] ); then

zypper install -y "iptables"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include install_iptables

class install_iptables {
  package { 'iptables':
    ensure => 'installed',
  }
}
Group   IPv6   Group contains 2 groups and 2 rules
[ref]   The system includes support for Internet Protocol version 6. A major and often-mentioned improvement over IPv4 is its enormous increase in the number of available addresses. Another important feature is its support for automatic configuration of many network settings.
Group   Disable Support for IPv6 Unless Needed   Group contains 1 rule
[ref]   Despite configuration that suggests support for IPv6 has been disabled, link-local IPv6 address auto-configuration occurs even when only an IPv4 address is assigned. The only way to effectively prevent execution of the IPv6 networking stack is to instruct the system not to activate the IPv6 kernel module.

Rule   Ensure IPv6 is disabled through kernel boot parameter   [ref]

To disable IPv6 protocol support in the Linux kernel, add the argument ipv6.disable=1 to the default GRUB2 command line for the Linux operating system. Configure the default Grub2 kernel command line to contain ipv6.disable=1 as follows:
# grub2-editenv - set "$(grub2-editenv - list | grep kernelopts) ipv6.disable=1"
Rationale:
Any unnecessary network stacks, including IPv6, should be disabled to reduce the vulnerability to exploitation.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_grub2_ipv6_disable_argument
Identifiers:

CCE-91548-8

References:
pcidssReq-1.3.1, Req-1.3.2
cis3.1.1

[customizations.kernel]
append = "ipv6.disable=1"

Complexity:medium
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91548-8
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - grub2_ipv6_disable_argument
  - low_disruption
  - low_severity
  - medium_complexity
  - reboot_required
  - restrict_strategy

- name: Check ipv6.disable argument exists
  command: grep '^\s*GRUB_CMDLINE_LINUX=.*ipv6.disable=' /etc/default/grub
  failed_when: false
  register: argcheck
  when: '"grub2" in ansible_facts.packages'
  tags:
  - CCE-91548-8
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - grub2_ipv6_disable_argument
  - low_disruption
  - low_severity
  - medium_complexity
  - reboot_required
  - restrict_strategy

- name: Check ipv6.disable argument exists
  command: grep '^\s*GRUB_CMDLINE_LINUX=' /etc/default/grub
  failed_when: false
  register: linecheck
  when: '"grub2" in ansible_facts.packages'
  tags:
  - CCE-91548-8
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - grub2_ipv6_disable_argument
  - low_disruption
  - low_severity
  - medium_complexity
  - reboot_required
  - restrict_strategy

- name: Add ipv6.disable argument
  ansible.builtin.lineinfile:
    line: GRUB_CMDLINE_LINUX="ipv6.disable=1 "
    state: present
    dest: /etc/default/grub
    create: true
    mode: '0644'
  when:
  - '"grub2" in ansible_facts.packages'
  - argcheck is not skipped and linecheck is not skipped and argcheck.rc != 0 and
    linecheck.rc != 0
  tags:
  - CCE-91548-8
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - grub2_ipv6_disable_argument
  - low_disruption
  - low_severity
  - medium_complexity
  - reboot_required
  - restrict_strategy

- name: Replace existing ipv6.disable argument
  replace:
    path: /etc/default/grub
    regexp: ipv6.disable=[a-zA-Z0-9,]+
    replace: ipv6.disable=1
  when:
  - '"grub2" in ansible_facts.packages'
  - argcheck is not skipped and linecheck is not skipped and argcheck.rc == 0 and
    linecheck.rc == 0
  tags:
  - CCE-91548-8
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - grub2_ipv6_disable_argument
  - low_disruption
  - low_severity
  - medium_complexity
  - reboot_required
  - restrict_strategy

- name: Add ipv6.disable argument
  replace:
    path: /etc/default/grub
    regexp: (^\s*GRUB_CMDLINE_LINUX=.*)"
    replace: \1 ipv6.disable=1"
  when:
  - '"grub2" in ansible_facts.packages'
  - argcheck is not skipped and linecheck is not skipped and argcheck.rc != 0 and
    linecheck.rc == 0
  tags:
  - CCE-91548-8
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - grub2_ipv6_disable_argument
  - low_disruption
  - low_severity
  - medium_complexity
  - reboot_required
  - restrict_strategy

- name: Update grub defaults and the bootloader menu
  command: /usr/sbin/grub2-mkconfig -o /boot/grub2/grub.cfg
  when: '"grub2" in ansible_facts.packages'
  tags:
  - CCE-91548-8
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - grub2_ipv6_disable_argument
  - low_disruption
  - low_severity
  - medium_complexity
  - reboot_required
  - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q grub2; then

# Correct the form of default kernel command line in GRUB
if grep -q '^\s*GRUB_CMDLINE_LINUX=.*ipv6.disable=.*"'  '/etc/default/grub' ; then
       # modify the GRUB command-line if an ipv6.disable= arg already exists
       sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)ipv6.disable=[^[:space:]]\+\(.*\"\)/\1ipv6.disable=1\2/"  '/etc/default/grub'
# Add to already existing GRUB_CMDLINE_LINUX parameters
elif grep -q '^\s*GRUB_CMDLINE_LINUX='  '/etc/default/grub' ; then
       # no ipv6.disable=arg is present, append it
       sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)\"/\1 ipv6.disable=1\"/"  '/etc/default/grub'
# Add GRUB_CMDLINE_LINUX parameters line
else
       echo "GRUB_CMDLINE_LINUX=\"ipv6.disable=1\"" >> '/etc/default/grub'
fi
grub2-mkconfig -o /boot/grub2/grub2.cfg

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Configure IPv6 Settings if Necessary   Group contains 1 rule
[ref]   A major feature of IPv6 is the extent to which systems implementing it can automatically configure their networking devices using information from the network. From a security perspective, manually configuring important configuration information is preferable to accepting it from the network in an unauthenticated fashion.

Rule   Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default   [ref]

To set the runtime status of the net.ipv6.conf.default.accept_source_route kernel parameter, run the following command:
$ sudo sysctl -w net.ipv6.conf.default.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.default.accept_source_route = 0
Rationale:
Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv6 forwarding is enabled and the system is functioning as a router. Accepting source-routed packets in the IPv6 protocol has few legitimate uses. It should be disabled unless it is absolutely required.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_source_route
Identifiers:

CCE-83227-9

References:
cis-csc1, 12, 13, 14, 15, 16, 18, 4, 6, 8, 9
cobit5APO01.06, APO13.01, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.07, DSS06.02
cui3.1.20
disaCCI-000366
isa-62443-20094.2.3.4, 4.3.3.4, 4.4.3.3
isa-62443-2013SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nistCM-7(a), CM-7(b), CM-6(a), CM-6(b), CM-6.1(iv)
nist-csfDE.AE-1, ID.AM-3, PR.AC-5, PR.DS-5, PR.PT-4
pcidssReq-1.4.3
os-srgSRG-OS-000480-GPOS-00227
stigidSLES-12-030362
cis3.3.1
anssiR13
pcidss41.4.2
stigrefSV-237620r646823_rule

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.default.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83227-9
  - DISA-STIG-SLES-12-030362
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route

- name: Comment out any occurrences of net.ipv6.conf.default.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.default.accept_source_route
    replace: '#net.ipv6.conf.default.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83227-9
  - DISA-STIG-SLES-12-030362
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route

- name: Comment out any occurrences of net.ipv6.conf.default.accept_source_route from
    /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv6.conf.default.accept_source_route
    replace: '#net.ipv6.conf.default.accept_source_route'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83227-9
  - DISA-STIG-SLES-12-030362
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_source_route is set
  sysctl:
    name: net.ipv6.conf.default.accept_source_route
    value: '{{ sysctl_net_ipv6_conf_default_accept_source_route_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv6_conf_default_accept_source_route.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83227-9
  - DISA-STIG-SLES-12-030362
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.default.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_source_route" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv6_conf_default_accept_source_route.conf'

sysctl_net_ipv6_conf_default_accept_source_route_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_source_route="$sysctl_net_ipv6_conf_default_accept_source_route_value"

#
# If net.ipv6.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_source_route = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83227-9"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Kernel Parameters Which Affect Networking   Group contains 2 groups and 7 rules
[ref]   The sysctl utility is used to set parameters which affect the operation of the Linux kernel. Kernel parameters which affect networking and have security implications are described here.
Group   Network Related Kernel Runtime Parameters for Hosts and Routers   Group contains 6 rules
[ref]   Certain kernel parameters should be set for systems which are acting as either hosts or routers to improve the system's ability defend against certain types of IPv4 protocol attacks.

Rule   Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.rp_filter kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.all.rp_filter=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.rp_filter = 1
Rationale:
Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_rp_filter
Identifiers:

CCE-91533-0

References:
cis-csc1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9
cobit5APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02
cui3.1.20
disaCCI-000366, CCI-001551
isa-62443-20094.2.3.4, 4.3.3.4, 4.4.3.3
isa-62443-2013SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nistCM-7(a), CM-7(b), CM-6(a), SC-7(a)
nist-csfDE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4
pcidssReq-1.4.3
os-srgSRG-OS-000480-GPOS-00227
cis3.3.7
anssiR12
pcidss41.4.3

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.rp_filter.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91533-0
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter

- name: Comment out any occurrences of net.ipv4.conf.all.rp_filter from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.rp_filter
    replace: '#net.ipv4.conf.all.rp_filter'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91533-0
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter

- name: Comment out any occurrences of net.ipv4.conf.all.rp_filter from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.conf.all.rp_filter
    replace: '#net.ipv4.conf.all.rp_filter'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91533-0
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter
- name: XCCDF Value sysctl_net_ipv4_conf_all_rp_filter_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_rp_filter_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.rp_filter is set
  sysctl:
    name: net.ipv4.conf.all.rp_filter
    value: '{{ sysctl_net_ipv4_conf_all_rp_filter_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_conf_all_rp_filter.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91533-0
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.rp_filter from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.rp_filter.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.rp_filter" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_conf_all_rp_filter.conf'

sysctl_net_ipv4_conf_all_rp_filter_value='1'


#
# Set runtime for net.ipv4.conf.all.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.rp_filter="$sysctl_net_ipv4_conf_all_rp_filter_value"

#
# If net.ipv4.conf.all.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.rp_filter = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.rp_filter")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_rp_filter_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.rp_filter\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.rp_filter\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-91533-0"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for Accepting Secure ICMP Redirects on all IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.secure_redirects kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.all.secure_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.secure_redirects = 0
Rationale:
Accepting "secure" ICMP redirects (from those gateways listed as default gateways) has few legitimate uses. It should be disabled unless it is absolutely required.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_secure_redirects
Identifiers:

CCE-91535-5

References:
cis-csc1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cobit5APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui3.1.20
disaCCI-001503, CCI-001551
isa-62443-20094.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nistCM-7(a), CM-7(b), CM-6(a), SC-7(a)
nist-csfDE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
pcidssReq-1.4.3
os-srgSRG-OS-000480-GPOS-00227
cis3.3.3
anssiR12
pcidss41.4.3

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.secure_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91535-5
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_secure_redirects

- name: Comment out any occurrences of net.ipv4.conf.all.secure_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.secure_redirects
    replace: '#net.ipv4.conf.all.secure_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91535-5
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_secure_redirects

- name: Comment out any occurrences of net.ipv4.conf.all.secure_redirects from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.conf.all.secure_redirects
    replace: '#net.ipv4.conf.all.secure_redirects'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91535-5
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_secure_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_all_secure_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_secure_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.secure_redirects is set
  sysctl:
    name: net.ipv4.conf.all.secure_redirects
    value: '{{ sysctl_net_ipv4_conf_all_secure_redirects_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_conf_all_secure_redirects.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91535-5
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_secure_redirects

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.secure_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.secure_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.secure_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_conf_all_secure_redirects.conf'

sysctl_net_ipv4_conf_all_secure_redirects_value='0'


#
# Set runtime for net.ipv4.conf.all.secure_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.secure_redirects="$sysctl_net_ipv4_conf_all_secure_redirects_value"

#
# If net.ipv4.conf.all.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.secure_redirects = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.secure_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_secure_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.secure_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.secure_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-91535-5"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.default.accept_redirects kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.default.accept_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.accept_redirects = 0
Rationale:
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.
This feature of the IPv4 protocol has few legitimate uses. It should be disabled unless absolutely required.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_redirects
Identifiers:

CCE-83081-0

References:
cis-csc1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cjis5.10.1.1
cobit5APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui3.1.20
disaCCI-000366, CCI-001551
isa-62443-20094.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nistCM-7(a), CM-7(b), CM-6(a), SC-7(a)
nist-csfDE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
pcidssReq-1.4.3
os-srgSRG-OS-000480-GPOS-00227
stigidSLES-12-030400
cis3.3.3
anssiR12
pcidss41.4.3
stigrefSV-217292r603262_rule

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.accept_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83081-0
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-12-030400
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_redirects

- name: Comment out any occurrences of net.ipv4.conf.default.accept_redirects from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.accept_redirects
    replace: '#net.ipv4.conf.default.accept_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83081-0
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-12-030400
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_redirects

- name: Comment out any occurrences of net.ipv4.conf.default.accept_redirects from
    /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.conf.default.accept_redirects
    replace: '#net.ipv4.conf.default.accept_redirects'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83081-0
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-12-030400
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_default_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.accept_redirects is set
  sysctl:
    name: net.ipv4.conf.default.accept_redirects
    value: '{{ sysctl_net_ipv4_conf_default_accept_redirects_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_conf_default_accept_redirects.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83081-0
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-12-030400
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_redirects

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.accept_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_conf_default_accept_redirects.conf'

sysctl_net_ipv4_conf_default_accept_redirects_value='0'


#
# Set runtime for net.ipv4.conf.default.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.accept_redirects="$sysctl_net_ipv4_conf_default_accept_redirects_value"

#
# If net.ipv4.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_redirects = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83081-0"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable Kernel Parameter to Ignore ICMP Broadcast Echo Requests on IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.icmp_echo_ignore_broadcasts kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.icmp_echo_ignore_broadcasts = 1
Rationale:
Responding to broadcast (ICMP) echoes facilitates network mapping and provides a vector for amplification attacks.
Ignoring ICMP echo requests (pings) sent to broadcast or multicast addresses makes the system slightly more difficult to enumerate on the network.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_echo_ignore_broadcasts
Identifiers:

CCE-83080-2

References:
cis-csc1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cjis5.10.1.1
cobit5APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui3.1.20
disaCCI-000366
isa-62443-20094.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nistCM-7(a), CM-7(b), SC-5
nist-csfDE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
pcidssReq-1.4.3
os-srgSRG-OS-000480-GPOS-00227
stigidSLES-12-030380
cis3.3.5
pcidss41.4.2
stigrefSV-217290r603262_rule

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.icmp_echo_ignore_broadcasts.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83080-2
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-12-030380
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts

- name: Comment out any occurrences of net.ipv4.icmp_echo_ignore_broadcasts from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.icmp_echo_ignore_broadcasts
    replace: '#net.ipv4.icmp_echo_ignore_broadcasts'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83080-2
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-12-030380
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts

- name: Comment out any occurrences of net.ipv4.icmp_echo_ignore_broadcasts from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.icmp_echo_ignore_broadcasts
    replace: '#net.ipv4.icmp_echo_ignore_broadcasts'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83080-2
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-12-030380
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts
- name: XCCDF Value sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value # promote to variable
  set_fact:
    sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.icmp_echo_ignore_broadcasts is set
  sysctl:
    name: net.ipv4.icmp_echo_ignore_broadcasts
    value: '{{ sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_icmp_echo_ignore_broadcasts.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83080-2
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-12-030380
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.icmp_echo_ignore_broadcasts from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.icmp_echo_ignore_broadcasts.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.icmp_echo_ignore_broadcasts" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_icmp_echo_ignore_broadcasts.conf'

sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value='1'


#
# Set runtime for net.ipv4.icmp_echo_ignore_broadcasts
#
/sbin/sysctl -q -n -w net.ipv4.icmp_echo_ignore_broadcasts="$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value"

#
# If net.ipv4.icmp_echo_ignore_broadcasts present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_echo_ignore_broadcasts = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.icmp_echo_ignore_broadcasts")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.icmp_echo_ignore_broadcasts\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.icmp_echo_ignore_broadcasts\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83080-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable Kernel Parameter to Ignore Bogus ICMP Error Responses on IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.icmp_ignore_bogus_error_responses kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.icmp_ignore_bogus_error_responses=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.icmp_ignore_bogus_error_responses = 1
Rationale:
Ignoring bogus ICMP error responses reduces log size, although some activity would not be logged.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_ignore_bogus_error_responses
Identifiers:

CCE-91539-7

References:
cis-csc1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9
cobit5APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06
cui3.1.20
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2
nerc-cipCIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nistCM-7(a), CM-7(b), SC-5
nist-csfDE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3
pcidssReq-1.4.3
os-srgSRG-OS-000480-GPOS-00227
cis3.3.6
anssiR12
pcidss41.4.2

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.icmp_ignore_bogus_error_responses.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91539-7
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.icmp_ignore_bogus_error_responses
    from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.icmp_ignore_bogus_error_responses
    replace: '#net.ipv4.icmp_ignore_bogus_error_responses'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91539-7
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.icmp_ignore_bogus_error_responses
    from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.icmp_ignore_bogus_error_responses
    replace: '#net.ipv4.icmp_ignore_bogus_error_responses'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91539-7
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity
- name: XCCDF Value sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value # promote to variable
  set_fact:
    sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.icmp_ignore_bogus_error_responses is set
  sysctl:
    name: net.ipv4.icmp_ignore_bogus_error_responses
    value: '{{ sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_icmp_ignore_bogus_error_responses.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91539-7
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.icmp_ignore_bogus_error_responses from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.icmp_ignore_bogus_error_responses.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.icmp_ignore_bogus_error_responses" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_icmp_ignore_bogus_error_responses.conf'

sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value='1'


#
# Set runtime for net.ipv4.icmp_ignore_bogus_error_responses
#
/sbin/sysctl -q -n -w net.ipv4.icmp_ignore_bogus_error_responses="$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value"

#
# If net.ipv4.icmp_ignore_bogus_error_responses present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_ignore_bogus_error_responses = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.icmp_ignore_bogus_error_responses")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.icmp_ignore_bogus_error_responses\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.icmp_ignore_bogus_error_responses\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-91539-7"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable Kernel Parameter to Use TCP Syncookies on Network Interfaces   [ref]

To set the runtime status of the net.ipv4.tcp_syncookies kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.tcp_syncookies=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.tcp_syncookies = 1
Rationale:
A TCP SYN flood attack can cause a denial of service by filling a system's TCP connection table with connections in the SYN_RCVD state. Syncookies can be used to track a connection when a subsequent ACK is received, verifying the initiator is attempting a valid connection and is not a flood source. This feature is activated when a flood condition is detected, and enables the system to continue servicing valid connection requests.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_syncookies
Identifiers:

CCE-83179-2

References:
cis-csc1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9
cjis5.10.1.1
cobit5APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02
cui3.1.20
disaCCI-000366, CCI-001095
isa-62443-20094.2.3.4, 4.3.3.4, 4.4.3.3
isa-62443-2013SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nistCM-7(a), CM-7(b), SC-5(1), SC-5(2), SC-5(3)(a), CM-6(a)
nist-csfDE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4
pcidssReq-1.4.1
os-srgSRG-OS-000480-GPOS-00227, SRG-OS-000420-GPOS-00186, SRG-OS-000142-GPOS-00071
stigidSLES-12-030350
cis3.3.8
anssiR12
pcidss41.4.3
stigrefSV-217286r603262_rule

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.tcp_syncookies.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83179-2
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-12-030350
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies

- name: Comment out any occurrences of net.ipv4.tcp_syncookies from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.tcp_syncookies
    replace: '#net.ipv4.tcp_syncookies'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83179-2
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-12-030350
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies

- name: Comment out any occurrences of net.ipv4.tcp_syncookies from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.tcp_syncookies
    replace: '#net.ipv4.tcp_syncookies'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83179-2
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-12-030350
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies
- name: XCCDF Value sysctl_net_ipv4_tcp_syncookies_value # promote to variable
  set_fact:
    sysctl_net_ipv4_tcp_syncookies_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.tcp_syncookies is set
  sysctl:
    name: net.ipv4.tcp_syncookies
    value: '{{ sysctl_net_ipv4_tcp_syncookies_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_tcp_syncookies.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83179-2
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-12-030350
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.tcp_syncookies from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.tcp_syncookies.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.tcp_syncookies" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_tcp_syncookies.conf'

sysctl_net_ipv4_tcp_syncookies_value='1'


#
# Set runtime for net.ipv4.tcp_syncookies
#
/sbin/sysctl -q -n -w net.ipv4.tcp_syncookies="$sysctl_net_ipv4_tcp_syncookies_value"

#
# If net.ipv4.tcp_syncookies present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.tcp_syncookies = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.tcp_syncookies")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_tcp_syncookies_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.tcp_syncookies\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.tcp_syncookies\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83179-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Network Parameters for Hosts Only   Group contains 1 rule
[ref]   If the system is not going to be used as a router, then setting certain kernel parameters ensure that the host will not perform routing of network traffic.

Rule   Disable Kernel Parameter for IP Forwarding on IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.ip_forward kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.ip_forward=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.ip_forward = 0
Warning:  Certain technologies such as virtual machines, containers, etc. rely on IPv4 forwarding to enable and use networking. Disabling IPv4 forwarding would cause those technologies to stop working. Therefore, this rule should not be used in profiles or benchmarks that target usage of IPv4 forwarding.
Rationale:
Routing protocol daemons are typically used on routers to exchange network topology information with other routers. If this capability is used when not required, system network information may be unnecessarily transmitted across the network.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_ip_forward
Identifiers:

CCE-83088-5

References:
cis-csc1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9
cobit5APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06
cui3.1.20
disaCCI-000366
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2
nerc-cipCIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nistCM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a)
nist-csfDE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3, PR.PT-4
pcidssReq-1.3.1, Req-1.3.2
os-srgSRG-OS-000480-GPOS-00227
stigidSLES-12-030430
cis3.2.1
anssiR12
pcidss41.4.3
stigrefSV-217296r646767_rule

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.ip_forward.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83088-5
  - DISA-STIG-SLES-12-030430
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_ip_forward

- name: Comment out any occurrences of net.ipv4.ip_forward from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.ip_forward
    replace: '#net.ipv4.ip_forward'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83088-5
  - DISA-STIG-SLES-12-030430
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_ip_forward

- name: Comment out any occurrences of net.ipv4.ip_forward from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.ip_forward
    replace: '#net.ipv4.ip_forward'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83088-5
  - DISA-STIG-SLES-12-030430
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_ip_forward

- name: Ensure sysctl net.ipv4.ip_forward is set to 0
  sysctl:
    name: net.ipv4.ip_forward
    value: '0'
    sysctl_file: /etc/sysctl.d/net_ipv4_ip_forward.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83088-5
  - DISA-STIG-SLES-12-030430
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_ip_forward

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.ip_forward from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.ip_forward.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.ip_forward" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_ip_forward.conf'


#
# Set runtime for net.ipv4.ip_forward
#
/sbin/sysctl -q -n -w net.ipv4.ip_forward="0"

#
# If net.ipv4.ip_forward present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.ip_forward = 0" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.ip_forward")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.ip_forward\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.ip_forward\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83088-5"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Uncommon Network Protocols   Group contains 2 rules
[ref]   The system includes support for several network protocols which are not commonly used. Although security vulnerabilities in kernel networking code are not frequently discovered, the consequences can be dramatic. Ensuring uncommon network protocols are disabled reduces the system's risk to attacks targeted at its implementation of those protocols.
Warning:  Although these protocols are not commonly used, avoid disruption in your network environment by ensuring they are not needed prior to disabling them.

Rule   Disable DCCP Support   [ref]

The Datagram Congestion Control Protocol (DCCP) is a relatively new transport layer protocol, designed to support streaming media and telephony. To configure the system to prevent the dccp kernel module from being loaded, add the following line to the file /etc/modprobe.d/dccp.conf:
install dccp /bin/true
Rationale:
Disabling DCCP protects the system against exploitation of any flaws in its implementation.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_kernel_module_dccp_disabled
Identifiers:

CCE-91599-1

References:
cis-csc11, 14, 3, 9
cjis5.10.1
cobit5BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
cui3.4.6
disaCCI-001958
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nistCM-7(a), CM-7(b), CM-6(a)
nist-csfPR.IP-1, PR.PT-3
pcidssReq-1.4.2
os-srgSRG-OS-000096-GPOS-00050, SRG-OS-000378-GPOS-00163
cis3.4.1
pcidss41.4.2

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'dccp' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/dccp.conf
    regexp: install\s+dccp
    line: install dccp /bin/false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91599-1
  - CJIS-5.10.1
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.2
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - kernel_module_dccp_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

- name: Ensure kernel module 'dccp' is blacklisted
  lineinfile:
    create: true
    dest: /etc/modprobe.d/dccp.conf
    regexp: ^blacklist dccp$
    line: blacklist dccp
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91599-1
  - CJIS-5.10.1
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.2
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - kernel_module_dccp_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install dccp" /etc/modprobe.d/dccp.conf ; then
	
	sed -i 's#^install dccp.*#install dccp /bin/false#g' /etc/modprobe.d/dccp.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/dccp.conf
	echo "install dccp /bin/false" >> /etc/modprobe.d/dccp.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist dccp$" /etc/modprobe.d/dccp.conf ; then
	echo "blacklist dccp" >> /etc/modprobe.d/dccp.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable SCTP Support   [ref]

The Stream Control Transmission Protocol (SCTP) is a transport layer protocol, designed to support the idea of message-oriented communication, with several streams of messages within one connection. To configure the system to prevent the sctp kernel module from being loaded, add the following line to the file /etc/modprobe.d/sctp.conf:
install sctp /bin/true
Rationale:
Disabling SCTP protects the system against exploitation of any flaws in its implementation.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_kernel_module_sctp_disabled
Identifiers:

CCE-91600-7

References:
cis-csc11, 14, 3, 9
cjis5.10.1
cobit5BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
cui3.4.6
disaCCI-000381, CCI-000366
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nistCM-7(a), CM-7(b), CM-6(a)
nist-csfPR.IP-1, PR.PT-3
pcidssReq-1.4.2
os-srgSRG-OS-000095-GPOS-00049, SRG-OS-000480-GPOS-00227
cis3.4.2
pcidss41.4.2

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'sctp' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/sctp.conf
    regexp: install\s+sctp
    line: install sctp /bin/false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91600-7
  - CJIS-5.10.1
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.2
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - kernel_module_sctp_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

- name: Ensure kernel module 'sctp' is blacklisted
  lineinfile:
    create: true
    dest: /etc/modprobe.d/sctp.conf
    regexp: ^blacklist sctp$
    line: blacklist sctp
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91600-7
  - CJIS-5.10.1
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.2
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - kernel_module_sctp_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install sctp" /etc/modprobe.d/sctp.conf ; then
	
	sed -i 's#^install sctp.*#install sctp /bin/false#g' /etc/modprobe.d/sctp.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/sctp.conf
	echo "install sctp /bin/false" >> /etc/modprobe.d/sctp.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist sctp$" /etc/modprobe.d/sctp.conf ; then
	echo "blacklist sctp" >> /etc/modprobe.d/sctp.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Wireless Networking   Group contains 1 group and 1 rule
[ref]   Wireless networking, such as 802.11 (WiFi) and Bluetooth, can present a security risk to sensitive or classified systems and networks. Wireless networking hardware is much more likely to be included in laptop or portable systems than in desktops or servers.

Removal of hardware provides the greatest assurance that the wireless capability remains disabled. Acquisition policies often include provisions to prevent the purchase of equipment that will be used in sensitive spaces and includes wireless capabilities. If it is impractical to remove the wireless hardware, and policy permits the device to enter sensitive spaces as long as wireless is disabled, efforts should instead focus on disabling wireless capability via software.
Group   Disable Wireless Through Software Configuration   Group contains 1 rule
[ref]   If it is impossible to remove the wireless hardware from the device in question, disable as much of it as possible through software. The following methods can disable software support for wireless networking, but note that these methods do not prevent malicious software or careless users from re-activating the devices.

Rule   Deactivate Wireless Network Interfaces   [ref]

Deactivating wireless network interfaces should prevent normal usage of the wireless capability.

Configure the system to disable wireless network interfaces by issuing the following command for every active <WIFI-INTERFACE> in the system:
$ sudo wicked ifdown <WIFI-INTERFACE>
Also remove the configuration files for every wifi adapter from /etc/wicked/ifconfig/<WIFI-INTERFACE>.xml to prevent future connections.
Rationale:
The use of wireless networking can introduce many different attack vectors into the organization's network. Common attack vectors such as malicious association and ad hoc networks will allow an attacker to spoof a wireless access point (AP), allowing validated systems to connect to the malicious AP and enabling the attacker to monitor and record network traffic. These malicious APs can also serve to create a man-in-the-middle attack or be used to create a denial of service to valid network resources.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_wireless_disable_interfaces
Identifiers:

CCE-83148-7

References:
cis-csc11, 12, 14, 15, 3, 8, 9
cobit5APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06
cui3.1.16
disaCCI-000085, CCI-002418, CCI-002421, CCI-001443, CCI-001444
isa-62443-20094.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
ism1315, 1319
iso27001-2013A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2
nistAC-18(1), SC-8
nist-csfPR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4
pcidssReq-1.3.3
os-srgSRG-OS-000299-GPOS-00117, SRG-OS-000300-GPOS-00118, SRG-OS-000424-GPOS-00188, SRG-OS-000481-GPOS-000481
stigidSLES-12-030450
cis3.1.2
pcidss41.3.3
stigrefSV-217298r854164_rule

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83148-7
  - DISA-STIG-SLES-12-030450
  - NIST-800-171-3.1.16
  - NIST-800-53-AC-18(1)
  - NIST-800-53-SC-8
  - PCI-DSS-Req-1.3.3
  - PCI-DSSv4-1.3.3
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy
  - wireless_disable_interfaces

- name: Service facts
  ansible.builtin.service_facts: null
  tags:
  - CCE-83148-7
  - DISA-STIG-SLES-12-030450
  - NIST-800-171-3.1.16
  - NIST-800-53-AC-18(1)
  - NIST-800-53-SC-8
  - PCI-DSS-Req-1.3.3
  - PCI-DSSv4-1.3.3
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy
  - wireless_disable_interfaces

- name: Wicked Deactivate Wireless Network Interfaces
  command: wicked ifdown {{ item }}
  loop: '{{ ansible_facts.interfaces }}'
  when:
  - ansible_facts.services['wickedd.service'].state == 'running'
  - item.startswith("wl")
  tags:
  - CCE-83148-7
  - DISA-STIG-SLES-12-030450
  - NIST-800-171-3.1.16
  - NIST-800-53-AC-18(1)
  - NIST-800-53-SC-8
  - PCI-DSS-Req-1.3.3
  - PCI-DSSv4-1.3.3
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy
  - wireless_disable_interfaces

- name: Wicked Disable Wireless Network Interfaces
  lineinfile:
    path: /etc/sysconfig/network/ifcfg-{{ item }}
    regexp: ^STARTMODE=
    line: STARTMODE=off
  loop: '{{ ansible_facts.interfaces }}'
  when:
  - ansible_facts.services['wickedd.service'].state == 'running'
  - item.startswith("wl")
  tags:
  - CCE-83148-7
  - DISA-STIG-SLES-12-030450
  - NIST-800-171-3.1.16
  - NIST-800-53-AC-18(1)
  - NIST-800-53-SC-8
  - PCI-DSS-Req-1.3.3
  - PCI-DSSv4-1.3.3
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy
  - wireless_disable_interfaces

- name: NetworkManager Deactivate Wireless Network Interfaces
  command: nmcli radio wifi off
  when:
  - '''NetworkManager'' in ansible_facts.packages'
  - ansible_facts.services['NetworkManager.service'].state == 'running'
  tags:
  - CCE-83148-7
  - DISA-STIG-SLES-12-030450
  - NIST-800-171-3.1.16
  - NIST-800-53-AC-18(1)
  - NIST-800-53-SC-8
  - PCI-DSS-Req-1.3.3
  - PCI-DSSv4-1.3.3
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy
  - wireless_disable_interfaces


zypper install -y "NetworkManager"

if command -v nmcli >/dev/null 2>&1 && systemctl is-active NetworkManager >/dev/null 2>&1; then
    nmcli radio all off
fi

if command -v wicked >/dev/null 2>&1 && systemctl is-active wickedd >/dev/null 2>&1; then
  if [ -n "$(find /sys/class/net/*/ -type d -name wireless)" ]; then
    interfaces=$(find /sys/class/net/*/wireless -type d -name wireless | xargs -0 dirname | xargs basename)
    for iface in $interfaces; do
      wicked ifdown $iface
      sed -i 's/STARTMODE=.*/STARTMODE=off/' /etc/sysconfig/network/ifcfg-$iface
    done
  fi
fi
Group   File Permissions and Masks   Group contains 5 groups and 26 rules
[ref]   Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which they should not have access.

Several of the commands in this section search filesystems for files or directories with certain characteristics, and are intended to be run on every local partition on a given system. When the variable PART appears in one of the commands below, it means that the command is intended to be run repeatedly, with the name of each local partition substituted for PART in turn.

The following command prints a list of all xfs partitions on the local system, which is the default filesystem for SUSE Linux Enterprise 12 installations:
$ mount -t xfs | awk '{print $3}'
For any systems that use a different local filesystem type, modify this command as appropriate.
Group   Verify Permissions on Important Files and Directories   Group contains 1 group and 21 rules
[ref]   Permissions for many files on a system must be set restrictively to ensure sensitive information is properly protected. This section discusses important permission restrictions which can be verified to ensure that no harmful discrepancies have arisen.
Group   Verify Permissions on Files with Local Account Information and Credentials   Group contains 18 rules

Rule   Verify Group Who Owns Backup group File   [ref]

To properly set the group owner of /etc/group-, run the command:
$ sudo chgrp root /etc/group-
Rationale:
The /etc/group- file is a backup file of /etc/group, and as such, it contains information regarding groups that are configured on the system. Protection of this file is important for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_group
Identifiers:

CCE-91699-9

References:
disaCCI-002223
nistAC-6 (1)
pcidssReq-8.7
os-srgSRG-OS-000480-GPOS-00227
cis6.1.7
pcidss42.2.6

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Test for existence /etc/group-
  stat:
    path: /etc/group-
  register: file_exists
  tags:
  - CCE-91699-9
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_backup_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/group-
  file:
    path: /etc/group-
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91699-9
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_backup_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
chgrp 0 /etc/group-

Rule   Verify Group Who Owns Backup passwd File   [ref]

To properly set the group owner of /etc/passwd-, run the command:
$ sudo chgrp root /etc/passwd-
Rationale:
The /etc/passwd- file is a backup file of /etc/passwd, and as such, it contains information about the users that are configured on the system. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_passwd
Identifiers:

CCE-91693-2

References:
disaCCI-002223
nistAC-6 (1)
pcidssReq-8.7
os-srgSRG-OS-000480-GPOS-00227
cis6.1.5
pcidss42.2.6

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Test for existence /etc/passwd-
  stat:
    path: /etc/passwd-
  register: file_exists
  tags:
  - CCE-91693-2
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_backup_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/passwd-
  file:
    path: /etc/passwd-
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91693-2
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_backup_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
chgrp 0 /etc/passwd-

Rule   Verify User Who Owns Backup shadow File   [ref]

To properly set the group owner of /etc/shadow-, run the command:
$ sudo chgrp shadow /etc/shadow-
Rationale:
The /etc/shadow- file is a backup file of /etc/shadow, and as such, it contains the list of local system accounts and password hashes. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_shadow
Identifiers:

CCE-91697-3

References:
pcidssReq-8.7
os-srgSRG-OS-000480-GPOS-00227
cis6.1.6
pcidss42.2.6

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Test for existence /etc/shadow-
  stat:
    path: /etc/shadow-
  register: file_exists
  tags:
  - CCE-91697-3
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_backup_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 15 on /etc/shadow-
  file:
    path: /etc/shadow-
    group: '15'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91697-3
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_backup_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
chgrp 15 /etc/shadow-

Rule   Verify Group Who Owns group File   [ref]

To properly set the group owner of /etc/group, run the command:
$ sudo chgrp root /etc/group
Rationale:
The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_etc_group
Identifiers:

CCE-91626-2

References:
cis-csc12, 13, 14, 15, 16, 18, 3, 5
cjis5.5.2.2
cobit5APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-20094.3.3.7.3
isa-62443-2013SR 2.1, SR 5.2
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistCM-6(a), AC-6(1)
nist-csfPR.AC-4, PR.DS-5
pcidssReq-8.7.c
os-srgSRG-OS-000480-GPOS-00227
cis6.1.4
anssiR50
pcidss42.2.6

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Test for existence /etc/group
  stat:
    path: /etc/group
  register: file_exists
  tags:
  - CCE-91626-2
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/group
  file:
    path: /etc/group
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91626-2
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
chgrp 0 /etc/group

Rule   Verify Group Who Owns passwd File   [ref]

To properly set the group owner of /etc/passwd, run the command:
$ sudo chgrp root /etc/passwd
Rationale:
The /etc/passwd file contains information about the users that are configured on the system. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_etc_passwd
Identifiers:

CCE-91627-0

References:
cis-csc12, 13, 14, 15, 16, 18, 3, 5
cjis5.5.2.2
cobit5APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-20094.3.3.7.3
isa-62443-2013SR 2.1, SR 5.2
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistCM-6(a), AC-6(1)
nist-csfPR.AC-4, PR.DS-5
pcidssReq-8.7.c
os-srgSRG-OS-000480-GPOS-00227
cis6.1.2
anssiR50
pcidss42.2.6

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Test for existence /etc/passwd
  stat:
    path: /etc/passwd
  register: file_exists
  tags:
  - CCE-91627-0
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/passwd
  file:
    path: /etc/passwd
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91627-0
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
chgrp 0 /etc/passwd

Rule   Verify Group Who Owns shadow File   [ref]

To properly set the group owner of /etc/shadow, run the command:
$ sudo chgrp shadow /etc/shadow
Rationale:
The /etc/shadow file stores password hashes. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_etc_shadow
Identifiers:

CCE-91628-8

References:
cis-csc12, 13, 14, 15, 16, 18, 3, 5
cjis5.5.2.2
cobit5APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-20094.3.3.7.3
isa-62443-2013SR 2.1, SR 5.2
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistCM-6(a), AC-6(1)
nist-csfPR.AC-4, PR.DS-5
pcidssReq-8.7.c
os-srgSRG-OS-000480-GPOS-00227
cis6.1.3
anssiR50
pcidss42.2.6

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Test for existence /etc/shadow
  stat:
    path: /etc/shadow
  register: file_exists
  tags:
  - CCE-91628-8
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 15 on /etc/shadow
  file:
    path: /etc/shadow
    group: '15'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91628-8
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
chgrp 15 /etc/shadow

Rule   Verify User Who Owns Backup group File   [ref]

To properly set the owner of /etc/group-, run the command:
$ sudo chown root /etc/group- 
Rationale:
The /etc/group- file is a backup file of /etc/group, and as such, it contains information regarding groups that are configured on the system. Protection of this file is important for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_backup_etc_group
Identifiers:

CCE-91700-5

References:
disaCCI-002223
nistAC-6 (1)
pcidssReq-8.7.c
os-srgSRG-OS-000480-GPOS-00227
cis6.1.7
pcidss42.2.6

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Test for existence /etc/group-
  stat:
    path: /etc/group-
  register: file_exists
  tags:
  - CCE-91700-5
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_backup_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/group-
  file:
    path: /etc/group-
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91700-5
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_backup_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
chown 0 /etc/group-

Rule   Verify User Who Owns Backup passwd File   [ref]

To properly set the owner of /etc/passwd-, run the command:
$ sudo chown root /etc/passwd- 
Rationale:
The /etc/passwd- file is a backup file of /etc/passwd, and as such, it contains information about the users that are configured on the system. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_backup_etc_passwd
Identifiers:

CCE-91694-0

References:
disaCCI-002223
nistAC-6 (1)
pcidssReq-8.7.c
os-srgSRG-OS-000480-GPOS-00227
cis6.1.5
pcidss42.2.6

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Test for existence /etc/passwd-
  stat:
    path: /etc/passwd-
  register: file_exists
  tags:
  - CCE-91694-0
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_backup_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/passwd-
  file:
    path: /etc/passwd-
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91694-0
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_backup_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
chown 0 /etc/passwd-

Rule   Verify Group Who Owns Backup shadow File   [ref]

To properly set the owner of /etc/shadow-, run the command:
$ sudo chown root /etc/shadow- 
Rationale:
The /etc/shadow- file is a backup file of /etc/shadow, and as such, it contains the list of local system accounts and password hashes. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_backup_etc_shadow
Identifiers:

CCE-91696-5

References:
disaCCI-002223
nistAC-6 (1)
pcidssReq-8.7.c
os-srgSRG-OS-000480-GPOS-00227
cis6.1.6
pcidss42.2.6

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Test for existence /etc/shadow-
  stat:
    path: /etc/shadow-
  register: file_exists
  tags:
  - CCE-91696-5
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_backup_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/shadow-
  file:
    path: /etc/shadow-
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91696-5
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_backup_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
chown 0 /etc/shadow-

Rule   Verify User Who Owns group File   [ref]

To properly set the owner of /etc/group, run the command:
$ sudo chown root /etc/group 
Rationale:
The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_etc_group
Identifiers:

CCE-91665-0

References:
cis-csc12, 13, 14, 15, 16, 18, 3, 5
cjis5.5.2.2
cobit5APO01.06, DSS05.04, DSS05.07, DSS06.02
disaCCI-002223
isa-62443-20094.3.3.7.3
isa-62443-2013SR 2.1, SR 5.2
iso27001-2013A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cipCIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nistCM-6(a), AC-6(1)
nist-csfPR.AC-4, PR.DS-5
pcidssReq-8.7.c
os-srgSRG-OS-000480-GPOS-00227
cis6.1.4
anssiR50
pcidss42.2.6

Complexity:low
Disruption:low
Reboot:false
Strategy:configure