Guide to the Secure Configuration of SUSE Linux Enterprise 15

with profile CIS SUSE Linux Enterprise 15 Benchmark for Level 1 - Server
This profile defines a baseline that aligns to the "Level 1 - Server" configuration from the Center for Internet Security® SUSE Linux Enterprise 15 Benchmark™, v1.1.1, released 01-24-2022. This profile includes Center for Internet Security® SUSE Linux Enterprise 15 CIS Benchmarks™ content.

The SCAP Security Guide Project
https://www.open-scap.org/security-policies/scap-security-guide

This guide presents a catalog of security-relevant configuration settings for SUSE Linux Enterprise 15. It is a rendering of content structured in the eXtensible Configuration Checklist Description Format (XCCDF) in order to support security automation. The SCAP content is is available in the scap-security-guide package which is developed at https://www.open-scap.org/security-policies/scap-security-guide.

Providing system administrators with such guidance informs them how to securely configure systems under their control in a variety of network roles. Policy makers and baseline creators can use this catalog of settings, with its associated references to higher-level security control catalogs, in order to assist them in security baseline creation. This guide is a catalog, not a checklist, and satisfaction of every item is not likely to be possible or sensible in many operational scenarios. However, the XCCDF format enables granular selection and adjustment of settings, and their association with OVAL and OCIL content provides an automated checking capability. Transformations of this document, and its associated automated checking content, are capable of providing baselines that meet a diverse set of policy objectives. Some example XCCDF Profiles, which are selections of items that form checklists and can be used as baselines, are available with this guide. They can be processed, in an automated fashion, with tools that support the Security Content Automation Protocol (SCAP). The DISA STIG, which provides required settings for US Department of Defense systems, is one example of a baseline created from this guidance.

Do not attempt to implement any of the settings in this guide without first testing them in a non-operational environment. The creators of this guidance assume no responsibility whatsoever for its use by other parties, and makes no guarantees, expressed or implied, about its quality, reliability, or any other characteristic.

Profile Information

Profile Title	CIS SUSE Linux Enterprise 15 Benchmark for Level 1 - Server
Profile ID	xccdf_org.ssgproject.content_profile_cis_server_l1

CPE Platforms

cpe:/o:suse:linux_enterprise_desktop:15
cpe:/o:suse:linux_enterprise_server:15

Revision History

Current version: 0.1.73

draft (as of 2024-05-08)

System Settings
Services

Checklist

Group Guide to the Secure Configuration of SUSE Linux Enterprise 15 Group contains 104 groups and 305 rules

Group System Settings Group contains 59 groups and 206 rules

[ref] Contains rules that check correct system settings.

Group Installing and Maintaining Software Group contains 7 groups and 16 rules

[ref] The following sections contain information on security-relevant choices during the initial operating system installation process and the setup of software updates.

Group System and Software Integrity Group contains 2 groups and 4 rules

[ref] System and software integrity can be gained by installing antivirus, increasing system encryption strength with FIPS, verifying installed software, enabling SELinux, installing an Intrusion Prevention System, etc. However, installing or enabling integrity checking tools cannot prevent intrusions, but they can detect that an intrusion may have occurred. Requirements for integrity checking may be highly dependent on the environment in which the system will be used. Snapshot-based approaches such as AIDE may induce considerable overhead in the presence of frequent software updates.

Group Software Integrity Checking Group contains 1 group and 3 rules

[ref] Both the AIDE (Advanced Intrusion Detection Environment) software and the RPM package management system provide mechanisms for verifying the integrity of installed software. AIDE uses snapshots of file metadata (such as hashes) and compares these to current system files in order to detect changes.

The RPM package management system can conduct integrity checks by comparing information in its metadata database with files installed on the system.

Group Verify Integrity with AIDE Group contains 3 rules

[ref] AIDE conducts integrity checks by comparing information about files with previously-gathered information. Ideally, the AIDE database is created immediately after initial system configuration, and then again after any software update. AIDE is highly configurable, with further configuration information located in

/usr/share/doc/aide-VERSION

Rule Install AIDE [ref]

The aide package can be installed with the following command:

$ sudo zypper install aide

Rationale:

The AIDE package must be installed if it is to be available for integrity checking.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_aide_installed

Identifiers:

CCE-83289-9

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9
cjis	5.10.1.3
cobit5	APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06
disa	CCI-002696, CCI-002699, CCI-001744
isa-62443-2009	4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013	SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6
ism	1034, 1288, 1341, 1417
iso27001-2013	A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3
nist	CM-6(a)
nist-csf	DE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3
pcidss	Req-11.5
os-srg	SRG-OS-000445-GPOS-00199
stigid	SLES-15-010419
cis	1.4.1
anssi	R76, R79
pcidss4	11.5.2
stigref	SV-255922r880967_rule

Remediation OSBuild Blueprint snippet ⇲


[[packages]]
name = "aide"
version = "*"

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

- name: Ensure aide is installed
  package:
    name: aide
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83289-9
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-15-010419
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_aide_installed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include install_aide

class install_aide {
  package { 'aide':
    ensure => 'installed',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

zypper install -y "aide"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Build and Test AIDE Database [ref]

Run the following command to generate a new database:

$ sudo /usr/bin/aide --init

By default, the database will be written to the file /var/lib/aide/aide.db.new. Storing the database, the configuration file /etc/aide.conf, and the binary /usr/bin/aide (or hashes of these files), in a secure location (such as on read-only media) provides additional assurance about their integrity. The newly-generated database can be installed as follows:

$ sudo cp /var/lib/aide/aide.db.new /var/lib/aide/aide.db

To initiate a manual check, run the following command:

$ sudo /usr/bin/aide --check

If this check produces any unexpected output, investigate.

Rationale:

For AIDE to be effective, an initial database of "known-good" information about files must be captured and it should be able to be verified against the installed files.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_aide_build_database

Identifiers:

CCE-85787-0

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9
cjis	5.10.1.3
cobit5	APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06
isa-62443-2009	4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013	SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6
iso27001-2013	A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3
nist	CM-6(a)
nist-csf	DE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3
pcidss	Req-11.5
os-srg	SRG-OS-000445-GPOS-00199
stigid	SLES-15-010419
cis	1.4.1
anssi	R76, R79
pcidss4	11.5.2
stigref	SV-255922r880967_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Build and Test AIDE Database - Ensure Repositories Are Updated
  ansible.builtin.command: zypper -q --no-remote ref
  failed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85787-0
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-15-010419
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Ensure AIDE Is Installed
  ansible.builtin.package:
    name: '{{ item }}'
    state: present
  with_items:
  - aide
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85787-0
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-15-010419
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Build and Test AIDE Database
  ansible.builtin.command: /usr/bin/aide --init
  changed_when: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85787-0
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-15-010419
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Check Whether the Stock AIDE Database Exists
  ansible.builtin.stat:
    path: /var/lib/aide/aide.db.new
  register: aide_database_stat
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85787-0
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-15-010419
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Stage AIDE Database
  ansible.builtin.copy:
    src: /var/lib/aide/aide.db.new
    dest: /var/lib/aide/aide.db
    backup: true
    remote_src: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - (aide_database_stat.stat.exists is defined and aide_database_stat.stat.exists)
  tags:
  - CCE-85787-0
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-15-010419
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

zypper -q --no-remote ref


zypper install -y "aide"

/usr/bin/aide --init
/bin/cp -p /var/lib/aide/aide.db.new /var/lib/aide/aide.db

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Configure Systemd Timer Execution of AIDE [ref]

At a minimum, AIDE should be configured to run a weekly scan. To implement a systemd service and a timer unit to run the service periodically: For example, if a systemd timer is expected to be started every day at 5AM

OnCalendar=*-*-* 05:00:0

[Timer]

section in the timer unit and a Unit section starting the AIDE check service unit should be referred.

Rationale:

AIDE provides a means to check if unauthorized changes are made to the system. AIDE itself does not setup a periodic execution, so in order to detect unauthorized changes a systemd service to run the check and a systemd timer to take care of periodical execution of that systemd service should be defined.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_aide_periodic_checking_systemd_timer

Identifiers:

CCE-92516-4

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9
cjis	5.10.1.3
cobit5	APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06
disa	CCI-001744, CCI-002699, CCI-002702
isa-62443-2009	4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013	SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6
iso27001-2013	A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3
nist	SI-6(d)
nist-csf	DE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3
pcidss	Req-11.5
os-srg	SRG-OS-000363-GPOS-00150, SRG-OS-000446-GPOS-00200, SRG-OS-000447-GPOS-00201
stigid	SLES-15-010570
cis	1.4.2
anssi	R76
pcidss4	11.5.2
stigref	SV-234864r902854_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92516-4
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-15-010570
  - NIST-800-53-SI-6(d)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_checking_systemd_timer
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Configure Systemd Timer Execution of AIDE - Define AIDE Periodic Check Service
  ansible.builtin.blockinfile:
    create: true
    dest: /etc/systemd/system/aidecheck.service
    owner: root
    group: root
    mode: '0644'
    block: |
      [Unit]
      Description=Aide Check
      [Service]
      Type=simple
      ExecStart=/usr/bin/aide --check
      [Install]
      WantedBy=multi-user.target
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"aide" in ansible_facts.packages'
  tags:
  - CCE-92516-4
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-15-010570
  - NIST-800-53-SI-6(d)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_checking_systemd_timer
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Configure Systemd Timer Execution of AIDE - Define AIDE Periodic Check Service
    Timer
  ansible.builtin.blockinfile:
    create: true
    dest: /etc/systemd/system/aidecheck.timer
    owner: root
    group: root
    mode: '0644'
    block: |
      [Unit]
      Description=Aide check every day at 5AM
      [Timer]
      OnCalendar=*-*-* 05:00:00
      Unit=aidecheck.service
      [Install]
      WantedBy=multi-user.target
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"aide" in ansible_facts.packages'
  tags:
  - CCE-92516-4
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-15-010570
  - NIST-800-53-SI-6(d)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_checking_systemd_timer
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Configure Systemd Timer Execution of AIDE - Ensure AIDE Service is Enabled
  ansible.builtin.systemd:
    name: aidecheck.service
    enabled: true
    daemon_reload: true
    masked: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"aide" in ansible_facts.packages'
  tags:
  - CCE-92516-4
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-15-010570
  - NIST-800-53-SI-6(d)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_checking_systemd_timer
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Configure Systemd Timer Execution of AIDE - Ensure AIDE Service Timer is Enabled
  ansible.builtin.systemd:
    name: aidecheck.timer
    state: started
    enabled: true
    daemon_reload: true
    masked: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"aide" in ansible_facts.packages'
  tags:
  - CCE-92516-4
  - CJIS-5.10.1.3
  - DISA-STIG-SLES-15-010570
  - NIST-800-53-SI-6(d)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_checking_systemd_timer
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q aide; }; then

zypper install -y "aide"

# create unit file for periodic aide database check
cat > /etc/systemd/system/aidecheck.service <<EOF
[Unit]
Description=Aide Check
[Service]
Type=simple
ExecStart=/usr/bin/aide --check
[Install]
WantedBy=multi-user.target
EOF

# create unit file for the aide check timer
cat > /etc/systemd/system/aidecheck.timer <<EOF
[Unit]
Description=Aide check every day at 5AM
[Timer]
OnCalendar=*-*-* 05:00:00
Unit=aidecheck.service
[Install]
WantedBy=multi-user.target
EOF

#  setup service unit files attributes
chown root:root /etc/systemd/system/aidecheck.*
chmod 0644 /etc/systemd/system/aidecheck.*

# enable the aide related services
systemctl daemon-reload
systemctl enable aidecheck.service
systemctl --now enable aidecheck.timer

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable Prelinking [ref]

The prelinking feature changes binaries in an attempt to decrease their startup time. In order to disable it, change or add the following line inside the file /etc/sysconfig/prelink:

PRELINKING=no

Next, run the following command to return binaries to a normal, non-prelinked state:

$ sudo /usr/sbin/prelink -ua

Rationale:

Because the prelinking feature changes binaries, it can interfere with the operation of certain software and/or modes such as AIDE, FIPS, etc.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_disable_prelink

Identifiers:

CCE-91341-8

References:

cis-csc	11, 13, 14, 2, 3, 9
cjis	5.10.1.3
cobit5	APO01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS04.07, DSS05.03, DSS06.02, DSS06.06
cui	3.13.11
disa	CCI-000803, CCI-002450
isa-62443-2009	4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013	SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 7.6
iso27001-2013	A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.3
nerc-cip	CIP-003-8 R4.2, CIP-007-3 R5.1
nist	SC-13, CM-6(a)
nist-csf	PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1
pcidss	Req-11.5
cis	1.6.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Does prelink file exist
  stat:
    path: /etc/sysconfig/prelink
  register: prelink_exists
  tags:
  - CCE-91341-8
  - CJIS-5.10.1.3
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-13
  - PCI-DSS-Req-11.5
  - disable_prelink
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Disable prelinking
  lineinfile:
    path: /etc/sysconfig/prelink
    regexp: ^PRELINKING=
    line: PRELINKING=no
  when: prelink_exists.stat.exists
  tags:
  - CCE-91341-8
  - CJIS-5.10.1.3
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-13
  - PCI-DSS-Req-11.5
  - disable_prelink
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

# prelink not installed
if test -e /etc/sysconfig/prelink -o -e /usr/sbin/prelink; then
    if grep -q ^PRELINKING /etc/sysconfig/prelink
    then
        sed -i 's/^PRELINKING[:blank:]*=[:blank:]*[:alpha:]*/PRELINKING=no/' /etc/sysconfig/prelink
    else
        printf '\n' >> /etc/sysconfig/prelink
        printf '%s\n' '# Set PRELINKING=no per security requirements' 'PRELINKING=no' >> /etc/sysconfig/prelink
    fi

    # Undo previous prelink changes to binaries if prelink is available.
    if test -x /usr/sbin/prelink; then
        /usr/sbin/prelink -ua
    fi
fi

Group Disk Partitioning Group contains 2 rules

[ref] To ensure separation and protection of data, there are top-level system directories which should be placed on their own physical partition or logical volume. The installer's default partitioning scheme creates separate logical volumes for /, /boot, and swap.

If starting with any of the default layouts, check the box to \"Review and modify partitioning.\" This allows for the easy creation of additional logical volumes inside the volume group already created, though it may require making /'s logical volume smaller to create space. In general, using logical volumes is preferable to using partitions because they can be more easily adjusted later.
If creating a custom layout, create the partitions mentioned in the previous paragraph (which the installer will require anyway), as well as separate ones described in the following sections.

If a system has already been installed, and the default partitioning scheme was used, it is possible but nontrivial to modify it to create separate logical volumes for the directories listed above. The Logical Volume Manager (LVM) makes this possible. See the LVM HOWTO at http://tldp.org/HOWTO/LVM-HOWTO/ for more detailed information on LVM.

Rule Ensure /dev/shm is configured [ref]

The /dev/shm is a traditional shared memory concept. One program will create a memory portion, which other processes (if permitted) can access. If /dev/shm is not configured, tmpfs will be mounted to /dev/shm by systemd.

Warning: This rule does not have a remedation. It is expected that this will be managed by systemd and will be a tmpfs partition.

Rationale:

Any user can upload and execute files inside the /dev/shm similar to the /tmp partition. Configuring /dev/shm allows an administrator to set the noexec option on the mount, making /dev/shm useless for an attacker to install executable code. It would also prevent an attacker from establishing a hardlink to a system setuid program and wait for it to be updated. Once the program was updated, the hardlink would be broken and the attacker would have his own copy of the program. If the program happened to have a security vulnerability, the attacker could continue to exploit the known flaw.

Severity:

low

Rule ID: xccdf_org.ssgproject.content_rule_partition_for_dev_shm

Identifiers:

CCE-92477-9

References:

cis	1.1.6

Rule Ensure /tmp Located On Separate Partition [ref]

The /tmp directory is a world-writable directory used for temporary file storage. Ensure it has its own partition or logical volume at installation time, or migrate it using LVM.

Rationale:

The /tmp partition is used as temporary storage by many programs. Placing /tmp in its own partition enables the setting of more restrictive mount options, which can help protect programs which use it.

Severity:

low

Rule ID: xccdf_org.ssgproject.content_rule_partition_for_tmp

Identifiers:

CCE-91179-2

References:

cis-csc	12, 15, 8
cobit5	APO13.01, DSS05.02
disa	CCI-000366
isa-62443-2013	SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
iso27001-2013	A.13.1.1, A.13.2.1, A.14.1.3
nist	CM-6(a), SC-5(2)
nist-csf	PR.PT-4
os-srg	SRG-OS-000480-GPOS-00227
cis	1.1.2

Group GNOME Desktop Environment Group contains 3 rules

[ref] GNOME is a graphical desktop environment bundled with many Linux distributions that allow users to easily interact with the operating system graphically rather than textually. The GNOME Graphical Display Manager (GDM) provides login, logout, and user switching contexts as well as display server management.

GNOME is developed by the GNOME Project and is considered the default Red Hat Graphical environment.

For more information on GNOME and the GNOME Project, see https://www.gnome.org.

Rule Remove the GDM Package Group [ref]

By removing the gdm package, the system no longer has GNOME installed installed. If X Windows is not installed then the system cannot boot into graphical user mode. This prevents the system from being accidentally or maliciously booted into a graphical.target mode. To do so, run the following command:

$ sudo yum remove gdm

Rationale:

Unnecessary service packages must not be installed to decrease the attack surface of the system. A graphical environment is unnecessary for certain types of systems including a virtualization hypervisor.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_gdm_removed

Identifiers:

CCE-92502-4

References:

nist	CM-7(a), CM-7(b), CM-6(a)
os-srg	SRG-OS-000480-GPOS-00227
cis	1.10

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92502-4
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_gdm_removed

- name: Ensure gdm is removed
  package:
    name: gdm
    state: absent
  when: '"gdm" in ansible_facts.packages'
  tags:
  - CCE-92502-4
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_gdm_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_gdm

class remove_gdm {
  package { 'gdm':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm; then

# CAUTION: This remediation script will remove gdm
#	   from the system, and may remove any packages
#	   that depend on gdm. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "gdm"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Make sure that the dconf databases are up-to-date with regards to respective keyfiles [ref]

By default, DConf uses a binary database as a data backend. The system-level database is compiled from keyfiles in the /etc/dconf/db/ directory by the

dconf update

command. More specifically, content present in the following directories:

/etc/dconf/db/gdm.d

/etc/dconf/db/local.d

Rationale:

Unlike text-based keyfiles, the binary database is impossible to check by OVAL. Therefore, in order to evaluate dconf configuration, both have to be true at the same time - configuration files have to be compliant, and the database needs to be more recent than those keyfiles, which gives confidence that it reflects them.

Severity:

high

Rule ID: xccdf_org.ssgproject.content_rule_dconf_db_up_to_date

Identifiers:

CCE-83288-1

References:

hipaa	164.308(a)(1)(ii)(B), 164.308(a)(5)(ii)(A)
pcidss	Req-6.2
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-010090
cis	1.10
pcidss4	8.2.8
stigref	SV-234809r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	false
Strategy:	unknown

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83288-1
  - DISA-STIG-SLES-15-010090
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-8.2.8
  - dconf_db_up_to_date
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed
  - unknown_strategy

- name: Run dconf update
  ansible.builtin.command:
    cmd: dconf update
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83288-1
  - DISA-STIG-SLES-15-010090
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-8.2.8
  - dconf_db_up_to_date
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed
  - unknown_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Configure GNOME3 DConf User Profile [ref]

By default, DConf provides a standard user profile. This profile contains a list of DConf configuration databases. The user profile and database always take the highest priority. As such the DConf User profile should always exist and be configured correctly.

To make sure that the user profile is configured correctly, the /etc/dconf/profile/gdm should be set as follows:

user-db:user
system-db:gdm

Rationale:

Failure to have a functional DConf profile prevents GNOME3 configuration settings from being enforced for all users and allows various security risks.

Severity:

high

Rule ID: xccdf_org.ssgproject.content_rule_enable_dconf_user_profile

Identifiers:

CCE-83267-5

References:

stigid	SLES-15-040061
cis	1.10
stigref	SV-234989r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	false
Strategy:	unknown

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83267-5
  - DISA-STIG-SLES-15-040061
  - enable_dconf_user_profile
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed
  - unknown_strategy

- name: Configure GNOME3 DConf User Profile
  lineinfile:
    dest: /etc/dconf/profile/gdm
    line: |-
      user-db:user
      system-db:gdm
    create: true
    state: present
  when:
  - '"gdm" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83267-5
  - DISA-STIG-SLES-15-040061
  - enable_dconf_user_profile
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed
  - unknown_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

echo -e 'user-db:user\nsystem-db:gdm' > /etc/dconf/profile/gdm

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Sudo Group contains 3 rules

[ref] Sudo, which stands for "su 'do'", provides the ability to delegate authority to certain users, groups of users, or system administrators. When configured for system users and/or groups, Sudo can allow a user or group to execute privileged commands that normally only root is allowed to execute.

For more information on Sudo and addition Sudo configuration options, see https://www.sudo.ws.

Rule Install sudo Package [ref]

The sudo package can be installed with the following command:

$ sudo zypper install sudo

Rationale:

sudo is a program designed to allow a system administrator to give limited root privileges to users and log root activity. The basic philosophy is to give as few privileges as possible but still allow system users to get their work done.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_sudo_installed

Identifiers:

CCE-91183-4

References:

ism	1382, 1384, 1386
nist	CM-6(a)
ospp	FMT_MOF_EXT.1
os-srg	SRG-OS-000324-GPOS-00125
cis	1.3.1
anssi	R33
pcidss4	2.2.6

Remediation OSBuild Blueprint snippet ⇲


[[packages]]
name = "sudo"
version = "*"

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

- name: Ensure sudo is installed
  package:
    name: sudo
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91183-4
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_sudo_installed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include install_sudo

class install_sudo {
  package { 'sudo':
    ensure => 'installed',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

zypper install -y "sudo"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure Only Users Logged In To Real tty Can Execute Sudo - sudo use_pty [ref]

The sudo use_pty tag, when specified, will only execute sudo commands from users logged in to a real tty. This should be enabled by making sure that the use_pty tag exists in /etc/sudoers configuration file or any sudo configuration snippets in /etc/sudoers.d/.

Rationale:

Requiring that sudo commands be run in a pseudo-terminal can prevent an attacker from retaining access to the user's terminal after the main program has finished executing.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sudo_add_use_pty

Identifiers:

CCE-91190-9

References:

pcidss	Req-10.2.5
cis	1.3.2
anssi	R39
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91190-9
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_add_use_pty

- name: Ensure use_pty is enabled in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    regexp: ^[\s]*Defaults.*\buse_pty\b.*$
    line: Defaults use_pty
    validate: /usr/sbin/visudo -cf %s
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-91190-9
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_add_use_pty

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if rpm --quiet -q sudo; then

if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults[\s]*\buse_pty\b.*$' /etc/sudoers; then
        # sudoers file doesn't define Option use_pty
        echo "Defaults use_pty" >> /etc/sudoers
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure Sudo Logfile Exists - sudo logfile [ref]

A custom log sudo file can be configured with the 'logfile' tag. This rule configures a sudo custom logfile at the default location suggested by CIS, which uses /var/log/sudo.log.

Rationale:

A sudo log file simplifies auditing of sudo commands.

Severity:

low

Rule ID: xccdf_org.ssgproject.content_rule_sudo_custom_logfile

Identifiers:

CCE-91311-1

References:

pcidss	Req-10.2.5
cis	1.3.3
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91311-1
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_custom_logfile
- name: XCCDF Value var_sudo_logfile # promote to variable
  set_fact:
    var_sudo_logfile: !!str /var/log/sudo.log
  tags:
    - always

- name: Ensure logfile is enabled with the appropriate value in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    regexp: ^[\s]*Defaults\s(.*)\blogfile=[-]?.+\b(.*)$
    line: Defaults \1logfile={{ var_sudo_logfile }}\2
    validate: /usr/sbin/visudo -cf %s
    backrefs: true
  register: edit_sudoers_logfile_option
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-91311-1
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_custom_logfile

- name: Enable logfile option with appropriate value in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    line: Defaults logfile={{ var_sudo_logfile }}
    validate: /usr/sbin/visudo -cf %s
  when:
  - '"sudo" in ansible_facts.packages'
  - edit_sudoers_logfile_option is defined and not edit_sudoers_logfile_option.changed
  tags:
  - CCE-91311-1
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_custom_logfile

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if rpm --quiet -q sudo; then

var_sudo_logfile='/var/log/sudo.log'


if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults[\s]*\blogfile\s*=\s*(?:"?([^",\s]+)"?)\b.*$' /etc/sudoers; then
        # sudoers file doesn't define Option logfile
        echo "Defaults logfile=${var_sudo_logfile}" >> /etc/sudoers
    else
        # sudoers file defines Option logfile, remediate if appropriate value is not set
        if ! grep -P "^[\s]*Defaults.*\blogfile=${var_sudo_logfile}\b.*$" /etc/sudoers; then
            
            escaped_variable=${var_sudo_logfile//$'/'/$'\/'}
            sed -Ei "s/(^[\s]*Defaults.*\blogfile=)[-]?.+(\b.*$)/\1$escaped_variable\2/" /etc/sudoers
        fi
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Updating Software Group contains 4 rules

[ref] The zypper command line tool is used to install and update software packages. The system also provides a graphical software update tool in the System menu, in the Administration submenu, called Software Update.

SUSE Linux Enterprise 15 systems contain an installed software catalog called the RPM database, which records metadata of installed packages. Consistently using zypper or the graphical Software Update for all software installation allows for insight into the current inventory of installed software on the system.

Rule Ensure GPG keys are configured [ref]

The operation system or installed application can be successfully bootstrapped without the GPG key being trusted. However, you cannot install new packages or update them until the keys are trusted.

Most packages managers implement GPG key signing to verify package integrity during installation.

To verify GPG keys are configured correctly for your package manager, one of the following command groups may provide the needed information depending on the package manager in use.

In SUSE Linux distributions, the administrators have to follow the next steps:
1. Log on to the system as a user with administrator rights.
2. Locate and download package, for example zoom_x86_64.rpm
3. Locate and download the public key (GPG) from the software download site, for example the key for zoom package is package-signing-key-5-12-6.pub
4. Import the key public key:
$ sudo rpm --import package-signing-key-5-12-6.pub
5. List the keys, for example the command:
$ sudo rpm -qa gpg-pubkey*
will provide:
gpg-pubkey-dd79b481-62fe7502
6. Get more details about the key, via the command:
$ sudo rpm -qa gpg-pubkey-dd79b481-62fe7502
7. Check the GPG key, for example the command:
$ sudo rpm -q gpg-pubkey --qf '%{name}-%{version}-%{release} --> %{summary}\n'
will provide:
gpg-pubkey-dd79b481-62fe7502 --> gpg(Zoom Video Communications, Inc. <CryptoOpsCodeSignProd@zoom.us>)

Rationale:

It is important to ensure that updates are obtained from a valid source to protect against spoofing that could lead to the inadvertent installation of malware on the system.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_ensure_GPG_keys_are_configured

Identifiers:

CCE-92542-0

References:

cis	1.2.1

Rule Ensure gpgcheck Enabled In Main zypper Configuration [ref]

The gpgcheck option controls whether RPM packages' signatures are always checked prior to installation. To configure zypper to check package signatures before installing them, ensure the following line appears in /etc/zypp/zypp.conf in the [main] section:

gpgcheck=1

Rationale:

Changes to any software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor.
Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA).

Severity:

high

Rule ID: xccdf_org.ssgproject.content_rule_ensure_gpgcheck_globally_activated

Identifiers:

CCE-83290-7

References:

cis-csc	11, 2, 3, 9
cjis	5.10.4.1
cobit5	APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02
cui	3.4.8
disa	CCI-001749
hipaa	164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i)
isa-62443-2009	4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013	SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6
iso27001-2013	A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4
nist	CM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), SA-12, SA-12(10), CM-11(a), CM-11(b)
nist-csf	PR.DS-6, PR.DS-8, PR.IP-1
ospp	FPT_TUD_EXT.1, FPT_TUD_EXT.2
pcidss	Req-6.2
os-srg	SRG-OS-000366-GPOS-00153
stigid	SLES-15-010430
cis	1.2.3
anssi	R59
pcidss4	6.3.3
stigref	SV-234852r877463_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	false
Strategy:	configure

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83290-7
  - CJIS-5.10.4.1
  - DISA-STIG-SLES-15-010430
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - configure_strategy
  - ensure_gpgcheck_globally_activated
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed

- name: Ensure GPG check is globally activated
  ini_file:
    dest: /etc/zypp/zypp.conf
    section: main
    option: gpgcheck
    value: 1
    no_extra_spaces: true
    create: false
  when: '"zypper" in ansible_facts.packages'
  tags:
  - CCE-83290-7
  - CJIS-5.10.4.1
  - DISA-STIG-SLES-15-010430
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - configure_strategy
  - ensure_gpgcheck_globally_activated
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q zypper; then

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^gpgcheck")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^gpgcheck\\>" "/etc/zypp/zypp.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^gpgcheck\\>.*/$escaped_formatted_output/gi" "/etc/zypp/zypp.conf"
else
    if [[ -s "/etc/zypp/zypp.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/zypp/zypp.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/zypp/zypp.conf"
    fi
    cce="CCE-83290-7"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/zypp/zypp.conf" >> "/etc/zypp/zypp.conf"
    printf '%s\n' "$formatted_output" >> "/etc/zypp/zypp.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure gpgcheck Enabled for All zypper Package Repositories [ref]

To ensure signature checking is not disabled for any repos, remove any lines from files in /etc/yum.repos.d of the form:

gpgcheck=0

Rationale:

Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA)."

Severity:

high

Rule ID: xccdf_org.ssgproject.content_rule_ensure_gpgcheck_never_disabled

Identifiers:

CCE-85797-9

References:

cis-csc	11, 2, 3, 9
cjis	5.10.4.1
cobit5	APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02
cui	3.4.8
disa	CCI-001749
hipaa	164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i)
isa-62443-2009	4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4
isa-62443-2013	SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6
iso27001-2013	A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4
nist	CM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), SA-12, SA-12(10), CM-11(a), CM-11(b)
nist-csf	PR.DS-6, PR.DS-8, PR.IP-1
ospp	FPT_TUD_EXT.1, FPT_TUD_EXT.2
pcidss	Req-6.2
os-srg	SRG-OS-000366-GPOS-00153
cis	1.2.3
anssi	R59
pcidss4	6.3.3

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	false
Strategy:	enable

- name: Grep for zypper repo section names
  shell: |
    set -o pipefail
    grep -HEr '^\[.+\]' -r /etc/zypp/repos.d/
  register: repo_grep_results
  failed_when: repo_grep_results.rc not in [0, 1]
  changed_when: false
  tags:
  - CCE-85797-9
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - enable_strategy
  - ensure_gpgcheck_never_disabled
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed

- name: Set gpgcheck=1 for each zypper repo
  ini_file:
    path: '{{ item[0] }}'
    section: '{{ item[1] }}'
    option: gpgcheck
    value: '1'
    no_extra_spaces: true
  loop: '{{ repo_grep_results.stdout |regex_findall( ''(.+\.repo):\[(.+)\]\n?'' )
    if repo_grep_results is not skipped else [] }}'
  when: repo_grep_results is not skipped
  tags:
  - CCE-85797-9
  - CJIS-5.10.4.1
  - NIST-800-171-3.4.8
  - NIST-800-53-CM-11(a)
  - NIST-800-53-CM-11(b)
  - NIST-800-53-CM-5(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SA-12
  - NIST-800-53-SA-12(10)
  - NIST-800-53-SC-12
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SI-7
  - PCI-DSS-Req-6.2
  - PCI-DSSv4-6.3.3
  - enable_strategy
  - ensure_gpgcheck_never_disabled
  - high_severity
  - low_complexity
  - medium_disruption
  - no_reboot_needed

Remediation Shell script ⇲


sed -i 's/gpgcheck\s*=.*/gpgcheck=1/g' /etc/zypp/repos.d/*

Rule Ensure package manager repositories are configured [ref]

Systems need to have package manager repositories configured to ensure they receive the latest patches and updates.

Rationale:

If the system's package repositories are misconfigured important patches may not be identified or a rogue repository could introduce compromised software.

Severity:

medium

Rule ID:

xccdf_org.ssgproject.content_rule_ensure_package_repositories_are_configured

Identifiers:

CCE-92489-4

References:

cis	1.2.2

Group Account and Access Control Group contains 16 groups and 65 rules

[ref] In traditional Unix security, if an attacker gains shell access to a certain login account, they can perform any action or access any file to which that account has access. Therefore, making it more difficult for unauthorized people to gain shell access to accounts, particularly to privileged accounts, is a necessary part of securing a system. This section introduces mechanisms for restricting access to accounts under SUSE Linux Enterprise 15.

Group Warning Banners for System Accesses Group contains 1 group and 14 rules

[ref] Each system should expose as little information about itself as possible.

System banners, which are typically displayed just before a login prompt, give out information about the service or the host's operating system. This might include the distribution name and the system kernel version, and the particular version of a network service. This information can assist intruders in gaining access to the system as it can reveal whether the system is running vulnerable software. Most network services can be configured to limit what information is displayed.

Many organizations implement security policies that require a system banner provide notice of the system's ownership, provide warning to unauthorized users, and remind authorized users of their consent to monitoring.

Group Implement a GUI Warning Banner Group contains 2 rules

[ref] In the default graphical environment, users logging directly into the system are greeted with a login screen provided by the GNOME Display Manager (GDM). The warning banner should be displayed in this graphical environment for these users. The following sections describe how to configure the GDM login banner.

Rule Enable GNOME3 Login Warning Banner [ref]

In the default graphical environment, displaying a login warning banner in the GNOME Display Manager's login screen can be enabled on the login screen by setting banner-message-enable to true.

To enable, add or edit banner-message-enable to /etc/dconf/db/gdm.d/00-security-settings. For example:

[org/gnome/login-screen]
banner-message-enable=true

Once the setting has been added, add a lock to /etc/dconf/db/gdm.d/locks/00-security-settings-lock to prevent user modification. For example:

/org/gnome/login-screen/banner-message-enable

After the settings have been set, run dconf update. The banner text must also be set.

Rationale:

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.

For U.S. Government systems, system use notifications are required only for access via login interfaces with human users and are not required when such human interfaces do not exist.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_dconf_gnome_banner_enabled

Identifiers:

CCE-83265-9

References:

cis-csc	1, 12, 15, 16
cobit5	DSS05.04, DSS05.10, DSS06.10
cui	3.1.9
disa	CCI-000048, CCI-000050, CCI-001384, CCI-001385, CCI-001386, CCI-001387, CCI-001388
isa-62443-2009	4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
iso27001-2013	A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nist	AC-8(a), AC-8(b), AC-8(c)
nist-csf	PR.AC-7
ospp	FMT_MOF_EXT.1
os-srg	SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088
stigid	SLES-15-010080
cis	1.10
stigref	SV-234808r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	false
Strategy:	unknown

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83265-9
  - DISA-STIG-SLES-15-010080
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(b)
  - NIST-800-53-AC-8(c)
  - dconf_gnome_banner_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Enable GNOME3 Login Warning Banner
  ini_file:
    dest: /etc/dconf/db/gdm.d/00-security-settings
    section: org/gnome/login-screen
    option: banner-message-enable
    value: 'true'
    create: true
    no_extra_spaces: true
  when: '"gdm" in ansible_facts.packages'
  tags:
  - CCE-83265-9
  - DISA-STIG-SLES-15-010080
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(b)
  - NIST-800-53-AC-8(c)
  - dconf_gnome_banner_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Prevent user modification of GNOME banner-message-enabled
  lineinfile:
    path: /etc/dconf/db/gdm.d/locks/00-security-settings-lock
    regexp: ^/org/gnome/login-screen/banner-message-enable$
    line: /org/gnome/login-screen/banner-message-enable
    create: true
  when: '"gdm" in ansible_facts.packages'
  tags:
  - CCE-83265-9
  - DISA-STIG-SLES-15-010080
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(b)
  - NIST-800-53-AC-8(c)
  - dconf_gnome_banner_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Dconf Update
  command: dconf update
  when: '"gdm" in ansible_facts.packages'
  tags:
  - CCE-83265-9
  - DISA-STIG-SLES-15-010080
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(b)
  - NIST-800-53-AC-8(c)
  - dconf_gnome_banner_enabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm; then

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/login-screen\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|gdm.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/gdm.d/00-security-settings"
DBDIR="/etc/dconf/db/gdm.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*banner-message-enable\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)banner-message-enable(\s*=)/#\1banner-message-enable\2/g" "${SETTINGSFILES[@]}"
    fi
fi

[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/login-screen\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/login-screen]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "true")"
if grep -q "^\\s*banner-message-enable\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*banner-message-enable\\s*=\\s*.*/banner-message-enable=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/login-screen\\]|a\\banner-message-enable=${escaped_value}" "${DCONFFILE}"
fi

dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/login-screen/banner-message-enable$" "/etc/dconf/db/" \
            | grep -v 'distro\|ibus\|gdm.d' | grep ":" | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/gdm.d/locks"

mkdir -p "${LOCKSFOLDER}"

# Comment out the configurations in databases different from the target one
if [[ ! -z "${LOCKFILES}" ]]
then
    sed -i -E "s|^/org/gnome/login-screen/banner-message-enable$|#&|" "${LOCKFILES[@]}"
fi

if ! grep -qr "^/org/gnome/login-screen/banner-message-enable$" /etc/dconf/db/gdm.d/
then
    echo "/org/gnome/login-screen/banner-message-enable" >> "/etc/dconf/db/gdm.d/locks/00-security-settings-lock"
fi

dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Set the GNOME3 Login Warning Banner Text [ref]

In the default graphical environment, configuring the login warning banner text in the GNOME Display Manager's login screen can be configured on the login screen by setting banner-message-text to 'APPROVED_BANNER' where APPROVED_BANNER is the approved banner for your environment.

To enable, add or edit banner-message-text to /etc/dconf/db/gdm.d/00-security-settings. For example:

[org/gnome/login-screen]
banner-message-text='APPROVED_BANNER'

Once the setting has been added, add a lock to /etc/dconf/db/gdm.d/locks/00-security-settings-lock to prevent user modification. For example:

/org/gnome/login-screen/banner-message-text

After the settings have been set, run dconf update. When entering a warning banner that spans several lines, remember to begin and end the string with ' and use \n for new lines.

Rationale:

An appropriate warning message reinforces policy awareness during the logon process and facilitates possible legal action against attackers.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_dconf_gnome_login_banner_text

Identifiers:

CCE-83266-7

References:

cis-csc	1, 12, 15, 16
cobit5	DSS05.04, DSS05.10, DSS06.10
cui	3.1.9
disa	CCI-000048, CCI-001384, CCI-001385, CCI-001386, CCI-001387, CCI-001388
isa-62443-2009	4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
iso27001-2013	A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nist	AC-8(a), AC-8(c)
nist-csf	PR.AC-7
ospp	FMT_MOF_EXT.1
os-srg	SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088
stigid	SLES-15-010090
cis	1.10
stigref	SV-234809r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	false
Strategy:	unknown

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83266-7
  - DISA-STIG-SLES-15-010090
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(c)
  - dconf_gnome_login_banner_text
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy
- name: XCCDF Value login_banner_text # promote to variable
  set_fact:
    login_banner_text: !!str ^(Authorized[\s\n]+uses[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.|^(?!.*(\\|fedora|rhel|sle|ubuntu)).*)$
  tags:
    - always

- name: Set the GNOME3 Login Warning Banner Text
  file:
    path: /etc/dconf/db/{{ item }}
    owner: root
    group: root
    mode: 493
    state: directory
  with_items:
  - gdm.d
  - gdm.d/locks
  when: '"gdm" in ansible_facts.packages'
  tags:
  - CCE-83266-7
  - DISA-STIG-SLES-15-010090
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(c)
  - dconf_gnome_login_banner_text
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Set the GNOME3 Login Warning Banner Text
  file:
    path: /etc/dconf/db/gdm.d/{{ item }}
    owner: root
    group: root
    mode: 420
    state: touch
  with_items:
  - 00-security-settings
  - locks/00-security-settings-lock
  when: '"gdm" in ansible_facts.packages'
  tags:
  - CCE-83266-7
  - DISA-STIG-SLES-15-010090
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(c)
  - dconf_gnome_login_banner_text
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Set the GNOME3 Login Warning Banner Text
  ini_file:
    dest: /etc/dconf/db/gdm.d/00-security-settings
    section: org/gnome/login-screen
    option: banner-message-text
    value: '''{{ login_banner_text | regex_replace("^\^(.*)\$$", "\1") | regex_replace("^\((.*\.)\|.*\)$",
      "\1") | regex_replace("\[\\s\\n\]\+"," ") | regex_replace("\(\?:\[\\n\]\+\|\(\?:\\\\n\)\+\)",
      "(n)*") | regex_replace("\\", "") | regex_replace("\(n\)\*", "\\n") }}'''
    create: true
    no_extra_spaces: true
  when: '"gdm" in ansible_facts.packages'
  tags:
  - CCE-83266-7
  - DISA-STIG-SLES-15-010090
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(c)
  - dconf_gnome_login_banner_text
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Prevent user modification of the GNOME3 Login Warning Banner Text
  lineinfile:
    path: /etc/dconf/db/gdm.d/locks/00-security-settings-lock
    regexp: ^/org/gnome/login-screen/banner-message-text$
    line: /org/gnome/login-screen/banner-message-text
    create: true
    state: present
  when: '"gdm" in ansible_facts.packages'
  tags:
  - CCE-83266-7
  - DISA-STIG-SLES-15-010090
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(c)
  - dconf_gnome_login_banner_text
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Dconf Update
  command: dconf update
  when: '"gdm" in ansible_facts.packages'
  tags:
  - CCE-83266-7
  - DISA-STIG-SLES-15-010090
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(c)
  - dconf_gnome_login_banner_text
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm; then

login_banner_text='^(Authorized[\s\n]+uses[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.|^(?!.*(\\|fedora|rhel|sle|ubuntu)).*)$'


# Multiple regexes transform the banner regex into a usable banner
# 0 - Remove anchors around the banner text
login_banner_text=$(echo "$login_banner_text" | sed 's/^\^\(.*\)\$$/\1/g')
# 1 - Keep only the first banners if there are multiple
#    (dod_banners contains the long and short banner)
login_banner_text=$(echo "$login_banner_text" | sed 's/^(\(.*\.\)|.*)$/\1/g')
# 2 - Add spaces ' '. (Transforms regex for "space or newline" into a " ")
login_banner_text=$(echo "$login_banner_text" | sed 's/\[\\s\\n\]+/ /g')
# 3 - Adds newline "tokens". (Transforms "(?:\[\\n\]+|(?:\\n)+)" into "(n)*")
login_banner_text=$(echo "$login_banner_text" | sed 's/(?:\[\\n\]+|(?:\\\\n)+)/(n)*/g')
# 4 - Remove any leftover backslash. (From any parethesis in the banner, for example).
login_banner_text=$(echo "$login_banner_text" | sed 's/\\//g')
# 5 - Removes the newline "token." (Transforms them into newline escape sequences "\n").
#    ( Needs to be done after 4, otherwise the escapce sequence will become just "n".
login_banner_text=$(echo "$login_banner_text" | sed 's/(n)\*/\\n/g')

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/login-screen\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|gdm.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/gdm.d/00-security-settings"
DBDIR="/etc/dconf/db/gdm.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*banner-message-text\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)banner-message-text(\s*=)/#\1banner-message-text\2/g" "${SETTINGSFILES[@]}"
    fi
fi

[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/login-screen\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/login-screen]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "'${login_banner_text}'")"
if grep -q "^\\s*banner-message-text\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*banner-message-text\\s*=\\s*.*/banner-message-text=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/login-screen\\]|a\\banner-message-text=${escaped_value}" "${DCONFFILE}"
fi

dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/login-screen/banner-message-text$" "/etc/dconf/db/" \
            | grep -v 'distro\|ibus\|gdm.d' | grep ":" | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/gdm.d/locks"

mkdir -p "${LOCKSFOLDER}"

# Comment out the configurations in databases different from the target one
if [[ ! -z "${LOCKFILES}" ]]
then
    sed -i -E "s|^/org/gnome/login-screen/banner-message-text$|#&|" "${LOCKFILES[@]}"
fi

if ! grep -qr "^/org/gnome/login-screen/banner-message-text$" /etc/dconf/db/gdm.d/
then
    echo "/org/gnome/login-screen/banner-message-text" >> "/etc/dconf/db/gdm.d/locks/00-security-settings-lock"
fi

dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Modify the System Login Banner [ref]

To configure the system login banner edit /etc/issue. Replace the default text with a message compliant with the local site policy or a legal disclaimer. The DoD required text is either:

You are accessing a U.S. Government (USG) Information System (IS) that
is provided for USG-authorized use only. By using this IS (which includes
any device attached to this IS), you consent to the following conditions:

-The USG routinely intercepts and monitors communications on this IS
for purposes including, but not limited to, penetration testing, COMSEC
monitoring, network operations and defense, personnel misconduct (PM), law
enforcement (LE), and counterintelligence (CI) investigations.

-At any time, the USG may inspect and seize data stored on this IS.

-Communications using, or data stored on, this IS are not private,
are subject to routine monitoring, interception, and search, and may be
disclosed or used for any USG-authorized purpose.

-This IS includes security measures (e.g., authentication and access
controls) to protect USG interests -- not for your personal benefit or
privacy.

-Notwithstanding the above, using this IS does not constitute consent
to PM, LE or CI investigative searching or monitoring of the content of
privileged communications, or work product, related to personal
representation or services by attorneys, psychotherapists, or clergy, and
their assistants. Such communications and work product are private and
confidential. See User Agreement for details.

OR:

I've read & consent to terms in IS user agreem't.

Rationale:

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.

System use notifications are required only for access via login interfaces with human users and are not required when such human interfaces do not exist.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_banner_etc_issue

Identifiers:

CCE-83262-6

References:

cis-csc	1, 12, 15, 16
cobit5	DSS05.04, DSS05.10, DSS06.10
cui	3.1.9
disa	CCI-000048, CCI-000050, CCI-001384, CCI-001385, CCI-001386, CCI-001387, CCI-001388
isa-62443-2009	4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
iso27001-2013	A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nist	AC-8(a), AC-8(c)
nist-csf	PR.AC-7
ospp	FMT_MOF_EXT.1
os-srg	SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088
stigid	SLES-15-010020
cis	1.8.1.2
stigref	SV-234803r951623_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	false
Strategy:	unknown

- name: XCCDF Value login_banner_text # promote to variable
  set_fact:
    login_banner_text: !!str ^(Authorized[\s\n]+uses[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.|^(?!.*(\\|fedora|rhel|sle|ubuntu)).*)$
  tags:
    - always

- name: Modify the System Login Banner Ensure issue-generator is Installed
  package:
    name: issue-generator
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83262-6
  - DISA-STIG-SLES-15-010020
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(c)
  - banner_etc_issue
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Modify the System Login Banner - Ensure Correct Banner
  copy:
    dest: /etc/issue.d/99-oscap-setting
    content: '{{ login_banner_text | regex_replace("^\^(.*)\$$", "\1") | regex_replace("^\((.*\.)\|.*\)$",
      "\1") | regex_replace("\[\\s\\n\]\+"," ") | regex_replace("\(\?:\[\\n\]\+\|\(\?:\\\\n\)\+\)",
      "\n") | regex_replace("\\", "") | wordwrap() }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83262-6
  - DISA-STIG-SLES-15-010020
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(c)
  - banner_etc_issue
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

- name: Modify the System Login Banner Retart issue-generator Service on Issue Configration
    Change
  ansible.builtin.systemd:
    name: issue-generator
    enabled: 'yes'
    state: restarted
    masked: 'no'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83262-6
  - DISA-STIG-SLES-15-010020
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(c)
  - banner_etc_issue
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

login_banner_text='^(Authorized[\s\n]+uses[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.|^(?!.*(\\|fedora|rhel|sle|ubuntu)).*)$'


# Multiple regexes transform the banner regex into a usable banner
# 0 - Remove anchors around the banner text
login_banner_text=$(echo "$login_banner_text" | sed 's/^\^\(.*\)\$$/\1/g')
# 1 - Keep only the first banners if there are multiple
#    (dod_banners contains the long and short banner)
login_banner_text=$(echo "$login_banner_text" | sed 's/^(\(.*\.\)|.*)$/\1/g')
# 2 - Add spaces ' '. (Transforms regex for "space or newline" into a " ")
login_banner_text=$(echo "$login_banner_text" | sed 's/\[\\s\\n\]+/ /g')
# 3 - Adds newlines. (Transforms "(?:\[\\n\]+|(?:\\n)+)" into "\n")
login_banner_text=$(echo "$login_banner_text" | sed 's/(?:\[\\n\]+|(?:\\\\n)+)/\n/g')
# 4 - Remove any leftover backslash. (From any parethesis in the banner, for example).
login_banner_text=$(echo "$login_banner_text" | sed 's/\\//g')
formatted=$(echo "$login_banner_text" | fold -sw 80)
zypper install -y "issue-generator"
cat <<EOF >/etc/issue.d/99-oscap-setting
$formatted
EOF
/usr/bin/systemctl enable "issue-generator"
/usr/bin/systemctl start "issue-generator"
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
if /usr/bin/systemctl --failed | grep -q "issue-generator"; then
    /usr/bin/systemctl reset-failed "issue-generator"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Modify the System Login Banner for Remote Connections [ref]

To configure the system login banner edit /etc/issue.net. Replace the default text with a message compliant with the local site policy or a legal disclaimer. The DoD required text is either:

You are accessing a U.S. Government (USG) Information System (IS) that
is provided for USG-authorized use only. By using this IS (which includes
any device attached to this IS), you consent to the following conditions:

-The USG routinely intercepts and monitors communications on this IS
for purposes including, but not limited to, penetration testing, COMSEC
monitoring, network operations and defense, personnel misconduct (PM), law
enforcement (LE), and counterintelligence (CI) investigations.

-At any time, the USG may inspect and seize data stored on this IS.

-Communications using, or data stored on, this IS are not private,
are subject to routine monitoring, interception, and search, and may be
disclosed or used for any USG-authorized purpose.

-This IS includes security measures (e.g., authentication and access
controls) to protect USG interests -- not for your personal benefit or
privacy.

-Notwithstanding the above, using this IS does not constitute consent
to PM, LE or CI investigative searching or monitoring of the content of
privileged communications, or work product, related to personal
representation or services by attorneys, psychotherapists, or clergy, and
their assistants. Such communications and work product are private and
confidential. See User Agreement for details.

OR:

I've read & consent to terms in IS user agreem't.

Rationale:

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.

System use notifications are required only for access via login interfaces with human users and are not required when such human interfaces do not exist.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_banner_etc_issue_net

Identifiers:

CCE-91350-9

References:

disa	CCI-000048, CCI-001384, CCI-001385, CCI-001386, CCI-001387, CCI-001388
os-srg	SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088
cis	1.8.1.3

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	false
Strategy:	unknown

- name: XCCDF Value remote_login_banner_text # promote to variable
  set_fact:
    remote_login_banner_text: !!str ^(Authorized[\s\n]+uses[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.|^(?!.*(\\|fedora|rhel|sle|ubuntu)).*)$
  tags:
    - always

- name: Modify the System Login Banner for Remote Connections - ensure correct banner
  copy:
    dest: /etc/issue.net
    content: '{{ remote_login_banner_text | regex_replace("^\^(.*)\$$", "\1") | regex_replace("^\((.*\.)\|.*\)$",
      "\1") | regex_replace("\[\\s\\n\]\+"," ") | regex_replace("\(\?:\[\\n\]\+\|\(\?:\\\\n\)\+\)",
      "\n") | regex_replace("\\", "") | wordwrap() }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91350-9
  - banner_etc_issue_net
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

remote_login_banner_text='^(Authorized[\s\n]+uses[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.|^(?!.*(\\|fedora|rhel|sle|ubuntu)).*)$'


# Multiple regexes transform the banner regex into a usable banner
# 0 - Remove anchors around the banner text
remote_login_banner_text=$(echo "$remote_login_banner_text" | sed 's/^\^\(.*\)\$$/\1/g')
# 1 - Keep only the first banners if there are multiple
#    (dod_banners contains the long and short banner)
remote_login_banner_text=$(echo "$remote_login_banner_text" | sed 's/^(\(.*\.\)|.*)$/\1/g')
# 2 - Add spaces ' '. (Transforms regex for "space or newline" into a " ")
remote_login_banner_text=$(echo "$remote_login_banner_text" | sed 's/\[\\s\\n\]+/ /g')
# 3 - Adds newlines. (Transforms "(?:\[\\n\]+|(?:\\n)+)" into "\n")
remote_login_banner_text=$(echo "$remote_login_banner_text" | sed 's/(?:\[\\n\]+|(?:\\\\n)+)/\n/g')
# 4 - Remove any leftover backslash. (From any parethesis in the banner, for example).
remote_login_banner_text=$(echo "$remote_login_banner_text" | sed 's/\\//g')
formatted=$(echo "$remote_login_banner_text" | fold -sw 80)

cat <<EOF >/etc/issue.net
$formatted
EOF

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Modify the System Message of the Day Banner [ref]

To configure the system message banner edit /etc/motd. Replace the default text with a message compliant with the local site policy or a legal disclaimer. The DoD required text is either:

You are accessing a U.S. Government (USG) Information System (IS) that
is provided for USG-authorized use only. By using this IS (which includes
any device attached to this IS), you consent to the following conditions:

-The USG routinely intercepts and monitors communications on this IS
for purposes including, but not limited to, penetration testing, COMSEC
monitoring, network operations and defense, personnel misconduct (PM), law
enforcement (LE), and counterintelligence (CI) investigations.

-At any time, the USG may inspect and seize data stored on this IS.

-Communications using, or data stored on, this IS are not private,
are subject to routine monitoring, interception, and search, and may be
disclosed or used for any USG-authorized purpose.

-This IS includes security measures (e.g., authentication and access
controls) to protect USG interests -- not for your personal benefit or
privacy.

-Notwithstanding the above, using this IS does not constitute consent
to PM, LE or CI investigative searching or monitoring of the content of
privileged communications, or work product, related to personal
representation or services by attorneys, psychotherapists, or clergy, and
their assistants. Such communications and work product are private and
confidential. See User Agreement for details.

OR:

I've read & consent to terms in IS user agreem't.

Rationale:

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.

System use notifications are required only for access via login interfaces with human users and are not required when such human interfaces do not exist.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_banner_etc_motd

Identifiers:

CCE-91349-1

References:

cis	1.8.1.1

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	false
Strategy:	unknown

- name: XCCDF Value motd_banner_text # promote to variable
  set_fact:
    motd_banner_text: !!str ^(Authorized[\s\n]+uses[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.|^(?!.*(\\|fedora|rhel|sle|ubuntu)).*)$
  tags:
    - always

- name: Modify the System Message of the Day Banner - ensure correct banner
  copy:
    dest: /etc/motd
    content: '{{ motd_banner_text | regex_replace("^\^(.*)\$$", "\1") | regex_replace("^\((.*\.)\|.*\)$",
      "\1") | regex_replace("\[\\s\\n\]\+"," ") | regex_replace("\(\?:\[\\n\]\+\|\(\?:\\\\n\)\+\)",
      "\n") | regex_replace("\\", "") | wordwrap() }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91349-1
  - banner_etc_motd
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

motd_banner_text='^(Authorized[\s\n]+uses[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.|^(?!.*(\\|fedora|rhel|sle|ubuntu)).*)$'


# Multiple regexes transform the banner regex into a usable banner
# 0 - Remove anchors around the banner text
motd_banner_text=$(echo "$motd_banner_text" | sed 's/^\^\(.*\)\$$/\1/g')
# 1 - Keep only the first banners if there are multiple
#    (dod_banners contains the long and short banner)
motd_banner_text=$(echo "$motd_banner_text" | sed 's/^(\(.*\.\)|.*)$/\1/g')
# 2 - Add spaces ' '. (Transforms regex for "space or newline" into a " ")
motd_banner_text=$(echo "$motd_banner_text" | sed 's/\[\\s\\n\]+/ /g')
# 3 - Adds newlines. (Transforms "(?:\[\\n\]+|(?:\\n)+)" into "\n")
motd_banner_text=$(echo "$motd_banner_text" | sed 's/(?:\[\\n\]+|(?:\\\\n)+)/\n/g')
# 4 - Remove any leftover backslash. (From any parethesis in the banner, for example).
motd_banner_text=$(echo "$motd_banner_text" | sed 's/\\//g')
formatted=$(echo "$motd_banner_text" | fold -sw 80)

cat <<EOF >/etc/motd
$formatted
EOF

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Group Ownership of System Login Banner [ref]

To properly set the group owner of /etc/issue, run the command:

$ sudo chgrp root /etc/issue

Rationale:

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper group ownership will ensure that only root user can modify the banner.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_etc_issue

Identifiers:

CCE-91355-8

References:

cis	1.8.1.5

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Find /etc/issue.d/ file(s) matching ^.*$ recursively
  command: find -H /etc/issue.d/  -type f ! -group 0 -regex "^.*$"
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  tags:
  - CCE-91355-8
  - configure_strategy
  - file_groupowner_etc_issue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner on /etc/issue.d/ file(s) matching ^.*$
  file:
    path: '{{ item }}'
    group: '0'
    state: file
  with_items:
  - '{{ files_found.stdout_lines }}'
  tags:
  - CCE-91355-8
  - configure_strategy
  - file_groupowner_etc_issue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure


find /etc/issue.d/  -type f ! -group 0 -regex '^.*$' -exec chgrp 0 {} \;

Rule Verify Group Ownership of System Login Banner for Remote Connections [ref]

To properly set the group owner of /etc/issue.net, run the command:

$ sudo chgrp root /etc/issue.net

Rationale:

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper group ownership will ensure that only root user can modify the banner.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_etc_issue_net

Identifiers:

CCE-91358-2

References:

cis	1.8.1.6
pcidss4	1.2.8

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/issue.net
  stat:
    path: /etc/issue.net
  register: file_exists
  tags:
  - CCE-91358-2
  - PCI-DSSv4-1.2.8
  - configure_strategy
  - file_groupowner_etc_issue_net
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/issue.net
  file:
    path: /etc/issue.net
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91358-2
  - PCI-DSSv4-1.2.8
  - configure_strategy
  - file_groupowner_etc_issue_net
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chgrp 0 /etc/issue.net

Rule Verify Group Ownership of Message of the Day Banner [ref]

To properly set the group owner of /etc/motd, run the command:

$ sudo chgrp root /etc/motd

Rationale:

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper group ownership will ensure that only root user can modify the banner.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_etc_motd

Identifiers:

CCE-91352-5

References:

cis	1.8.1.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/motd
  stat:
    path: /etc/motd
  register: file_exists
  tags:
  - CCE-91352-5
  - configure_strategy
  - file_groupowner_etc_motd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/motd
  file:
    path: /etc/motd
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91352-5
  - configure_strategy
  - file_groupowner_etc_motd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chgrp 0 /etc/motd

Rule Verify ownership of System Login Banner [ref]

To properly set the owner of /etc/issue, run the command:

$ sudo chown root /etc/issue

Rationale:

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper ownership will ensure that only root user can modify the banner.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_etc_issue

Identifiers:

CCE-91356-6

References:

cis	1.8.1.5

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Find /etc/issue.d/ file(s) matching ^.*$ recursively
  command: find -H /etc/issue.d/  -type f ! -uid 0 -regex "^.*$"
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  tags:
  - CCE-91356-6
  - configure_strategy
  - file_owner_etc_issue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner on /etc/issue.d/ file(s) matching ^.*$
  file:
    path: '{{ item }}'
    owner: '0'
    state: file
  with_items:
  - '{{ files_found.stdout_lines }}'
  tags:
  - CCE-91356-6
  - configure_strategy
  - file_owner_etc_issue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure


find /etc/issue.d/  -type f ! -uid 0 -regex '^.*$' -exec chown 0 {} \;

Rule Verify ownership of System Login Banner for Remote Connections [ref]

To properly set the owner of /etc/issue.net, run the command:

$ sudo chown root /etc/issue.net

Rationale:

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper ownership will ensure that only root user can modify the banner.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_etc_issue_net

Identifiers:

CCE-91359-0

References:

cis	1.8.1.6
pcidss4	1.2.8

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/issue.net
  stat:
    path: /etc/issue.net
  register: file_exists
  tags:
  - CCE-91359-0
  - PCI-DSSv4-1.2.8
  - configure_strategy
  - file_owner_etc_issue_net
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/issue.net
  file:
    path: /etc/issue.net
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91359-0
  - PCI-DSSv4-1.2.8
  - configure_strategy
  - file_owner_etc_issue_net
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chown 0 /etc/issue.net

Rule Verify ownership of Message of the Day Banner [ref]

To properly set the owner of /etc/motd, run the command:

$ sudo chown root /etc/motd

Rationale:

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper ownership will ensure that only root user can modify the banner.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_etc_motd

Identifiers:

CCE-91353-3

References:

cis	1.8.1.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/motd
  stat:
    path: /etc/motd
  register: file_exists
  tags:
  - CCE-91353-3
  - configure_strategy
  - file_owner_etc_motd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/motd
  file:
    path: /etc/motd
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91353-3
  - configure_strategy
  - file_owner_etc_motd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chown 0 /etc/motd

Rule Verify permissions on System Login Banner [ref]

To properly set the permissions of /etc/issue, run the command:

$ sudo chmod 0644 /etc/issue

Rationale:

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper permissions will ensure that only root user can modify the banner.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_etc_issue

Identifiers:

CCE-91354-1

References:

cis	1.8.1.5

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/issue
  stat:
    path: /etc/issue
  register: file_exists
  tags:
  - CCE-91354-1
  - configure_strategy
  - file_permissions_etc_issue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwt on /etc/issue
  file:
    path: /etc/issue
    mode: u-xs,g-xws,o-xwt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91354-1
  - configure_strategy
  - file_permissions_etc_issue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure






chmod u-xs,g-xws,o-xwt /etc/issue

Rule Verify permissions on System Login Banner for Remote Connections [ref]

To properly set the permissions of /etc/issue.net, run the command:

$ sudo chmod 0644 /etc/issue.net

Rationale:

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper permissions will ensure that only root user can modify the banner.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_etc_issue_net

Identifiers:

CCE-91357-4

References:

cis	1.8.1.6
pcidss4	1.2.8

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/issue.net
  stat:
    path: /etc/issue.net
  register: file_exists
  tags:
  - CCE-91357-4
  - PCI-DSSv4-1.2.8
  - configure_strategy
  - file_permissions_etc_issue_net
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwt on /etc/issue.net
  file:
    path: /etc/issue.net
    mode: u-xs,g-xws,o-xwt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91357-4
  - PCI-DSSv4-1.2.8
  - configure_strategy
  - file_permissions_etc_issue_net
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure






chmod u-xs,g-xws,o-xwt /etc/issue.net

Rule Verify permissions on Message of the Day Banner [ref]

To properly set the permissions of /etc/motd, run the command:

$ sudo chmod 0644 /etc/motd

Rationale:

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper permissions will ensure that only root user can modify the banner.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_etc_motd

Identifiers:

CCE-91351-7

References:

cis	1.8.1.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/motd
  stat:
    path: /etc/motd
  register: file_exists
  tags:
  - CCE-91351-7
  - configure_strategy
  - file_permissions_etc_motd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwt on /etc/motd
  file:
    path: /etc/motd
    mode: u-xs,g-xws,o-xwt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91351-7
  - configure_strategy
  - file_permissions_etc_motd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure






chmod u-xs,g-xws,o-xwt /etc/motd

Group Protect Accounts by Configuring PAM Group contains 4 groups and 11 rules

[ref] PAM, or Pluggable Authentication Modules, is a system which implements modular authentication for Linux programs. PAM provides a flexible and configurable architecture for authentication, and it should be configured to minimize exposure to unnecessary risk. This section contains guidance on how to accomplish that.

PAM is implemented as a set of shared objects which are loaded and invoked whenever an application wishes to authenticate a user. Typically, the application must be running as root in order to take advantage of PAM, because PAM's modules often need to be able to access sensitive stores of account information, such as /etc/shadow. Traditional privileged network listeners (e.g. sshd) or SUID programs (e.g. sudo) already meet this requirement. An SUID root application, userhelper, is provided so that programs which are not SUID or privileged themselves can still take advantage of PAM.

PAM looks in the directory /etc/pam.d for application-specific configuration information. For instance, if the program login attempts to authenticate a user, then PAM's libraries follow the instructions in the file /etc/pam.d/login to determine what actions should be taken.

One very important file in /etc/pam.d is /etc/pam.d/system-auth. This file, which is included by many other PAM configuration files, defines 'default' system authentication measures. Modifying this file is a good way to make far-reaching authentication changes, for instance when implementing a centralized authentication service.

Warning: Be careful when making changes to PAM's configuration files. The syntax for these files is complex, and modifications can have unexpected consequences. The default configurations shipped with applications should be sufficient for most users.

Warning: Running authconfig or system-config-authentication will re-write the PAM configuration files, destroying any manually made changes and replacing them with a series of system defaults. One reference to the configuration file syntax can be found at https://fossies.org/linux/Linux-PAM-docs/doc/sag/Linux-PAM_SAG.pdf.

Group Set Lockouts for Failed Password Attempts Group contains 4 rules

[ref] The pam_faillock PAM module provides the capability to lock out user accounts after a number of failed login attempts. Its documentation is available in /usr/share/doc/pam-VERSION/txts/README.pam_faillock.

Warning: Locking out user accounts presents the risk of a denial-of-service attack. The lockout policy must weigh whether the risk of such a denial-of-service attack outweighs the benefits of thwarting password guessing attacks.

Rule Limit Password Reuse [ref]

Do not allow users to reuse recent passwords. This can be accomplished by using the remember option for the pam_pwhistory PAM modules.

In the file /etc/pam.d/common-password, make sure the parameters remember and use_authtok are present, and that the value for the remember parameter is 5 or greater. For example:

password requisite pam_pwhistory.so ...existing_options... remember=5 use_authtok

The DoD STIG requirement is 5 passwords.

Rationale:

Preventing re-use of previous passwords helps ensure that a compromised password is not re-used by a user.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_password_pam_pwhistory_remember

Identifiers:

CCE-91398-8

References:

disa	CCI-000200
os-srg	SRG-OS-000077-GPOS-00045
cis	5.3.3

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91398-8
  - accounts_password_pam_pwhistory_remember
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_remember # promote to variable
  set_fact:
    var_password_pam_remember: !!str 5
  tags:
    - always

- name: Set control_flag fact
  set_fact:
    control_flag: requisite
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91398-8
  - accounts_password_pam_pwhistory_remember
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check to see if 'pam_pwhistory.so' module is configured in '/etc/pam.d/common-password'
  shell: |
    set -o pipefail
    grep -E '^\s*password\s+\S+\s+pam_pwhistory.so' /etc/pam.d/common-password || true
  register: check_pam_module_result
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91398-8
  - accounts_password_pam_pwhistory_remember
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure 'pam_pwhistory.so' module in '/etc/pam.d/common-password'
  lineinfile:
    path: /etc/pam.d/common-password
    line: password requisite pam_pwhistory.so
    state: present
  when:
  - '"pam" in ansible_facts.packages'
  - check_pam_module_result.stdout is defined and '"pam_pwhistory.so" not in check_pam_module_result.stdout'
  tags:
  - CCE-91398-8
  - accounts_password_pam_pwhistory_remember
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure 'pam_pwhistory.so' module has conforming control flag
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+)\S+(\s+pam_pwhistory.so\s+.*)
    line: \g<1>requisite\g<2>
    backrefs: true
  when:
  - '"pam" in ansible_facts.packages'
  - control_flag|length
  tags:
  - CCE-91398-8
  - accounts_password_pam_pwhistory_remember
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure "pam_pwhistory.so" module has argument "remember={{ var_password_pam_remember
    }}"
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+requisite\s+pam_pwhistory.so(?:\s+\S+)*\s+remember=)(?:\S+)((\s+\S+)*\s*\\*\s*)$
    line: \g<1>{{ var_password_pam_remember }}\g<2>
    backrefs: true
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91398-8
  - accounts_password_pam_pwhistory_remember
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check the presence of "remember" argument in "pam_pwhistory.so" module
  shell: |
    set -o pipefail
    grep -E '^\s*password\s+requisite\s+pam_pwhistory.so.*\s+remember(=|\s|\s*$)' /etc/pam.d/common-password || true
  register: check_pam_module_argument_result
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91398-8
  - accounts_password_pam_pwhistory_remember
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Add "remember" argument to "pam_pwhistory.so" module
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+requisite\s+pam_pwhistory.so)((\s+\S+)*\s*(\\)*$)
    line: \g<1> remember={{ var_password_pam_remember }}\g<2>
    backrefs: true
  when:
  - '"pam" in ansible_facts.packages'
  - check_pam_module_argument_result is not skipped and '"remember" not in check_pam_module_argument_result.stdout'
  tags:
  - CCE-91398-8
  - accounts_password_pam_pwhistory_remember
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set argument_value fact
  set_fact:
    argument_value: ''
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91398-8
  - accounts_password_pam_pwhistory_remember
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure "pam_pwhistory.so" module has argument "use_authtok"
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+requisite\s+pam_pwhistory.so(?:\s+\S+)*\s+use_authtok=)(?!)\S*((\s+\S+)*\s*\\*\s*)$
    line: \g<1>\g<2>
    backrefs: true
  when:
  - '"pam" in ansible_facts.packages'
  - argument_value|length
  tags:
  - CCE-91398-8
  - accounts_password_pam_pwhistory_remember
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check the presence of "use_authtok" argument in "pam_pwhistory.so" module
  shell: |
    set -o pipefail
    grep -E '^\s*password\s+requisite\s+pam_pwhistory.so.*\s+use_authtok(=|\s|\s*$)' /etc/pam.d/common-password || true
  register: check_pam_module_argument_result
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91398-8
  - accounts_password_pam_pwhistory_remember
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Add "use_authtok" argument to "pam_pwhistory.so" module
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+requisite\s+pam_pwhistory.so)((\s+\S+)*\s*(\\)*$)
    line: \g<1> use_authtok\g<2>
    backrefs: true
  when:
  - '"pam" in ansible_facts.packages'
  - check_pam_module_argument_result is not skipped and '"use_authtok" not in check_pam_module_argument_result.stdout'
  tags:
  - CCE-91398-8
  - accounts_password_pam_pwhistory_remember
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

declare -a VALUES=()
declare -a VALUE_NAMES=()
declare -a ARGS=()
declare -a NEW_ARGS=()

var_password_pam_remember='5'

VALUES+=("$var_password_pam_remember")
VALUE_NAMES+=("remember")
ARGS+=("")
NEW_ARGS+=("")
VALUES+=("")
VALUE_NAMES+=("")
ARGS+=("use_authtok")
NEW_ARGS+=("use_authtok")

for idx in "${!VALUES[@]}"
do
    if [ -e "/etc/pam.d/common-password" ] ; then
        valueRegex="${VALUES[$idx]}" defaultValue="${VALUES[$idx]}"
        # non-empty values need to be preceded by an equals sign
        [ -n "${valueRegex}" ] && valueRegex="=${valueRegex}"
        # add an equals sign to non-empty values
        [ -n "${defaultValue}" ] && defaultValue="=${defaultValue}"

        # fix the value for 'option' if one exists but does not match 'valueRegex'
        if grep -q -P "^\\s*password\\s+requisite\\s+pam_pwhistory.so(\\s.+)?\\s+${VALUE_NAMES[$idx]}(?"'!'"${valueRegex}(\\s|\$))" < "/etc/pam.d/common-password" ; then
            sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_pwhistory.so(\\s.+)?\\s)${VALUE_NAMES[$idx]}=[^[:space:]]*/\\1${VALUE_NAMES[$idx]}${defaultValue}/" "/etc/pam.d/common-password"

        # add 'option=default' if option is not set
        elif grep -q -E "^\\s*password\\s+requisite\\s+pam_pwhistory.so" < "/etc/pam.d/common-password" &&
                grep    -E "^\\s*password\\s+requisite\\s+pam_pwhistory.so" < "/etc/pam.d/common-password" | grep -q -E -v "\\s${VALUE_NAMES[$idx]}(=|\\s|\$)" ; then

            sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_pwhistory.so[^\\n]*)/\\1 ${VALUE_NAMES[$idx]}${defaultValue}/" "/etc/pam.d/common-password"
        # add a new entry if none exists
        elif ! grep -q -P "^\\s*password\\s+requisite\\s+pam_pwhistory.so(\\s.+)?\\s+${VALUE_NAMES[$idx]}${valueRegex}(\\s|\$)" < "/etc/pam.d/common-password" ; then
            echo "password requisite pam_pwhistory.so ${VALUE_NAMES[$idx]}${defaultValue}" >> "/etc/pam.d/common-password"
        fi
    else
        echo "/etc/pam.d/common-password doesn't exist" >&2
    fi
done

for idx in "${!ARGS[@]}"
do
    if ! grep -q -P "^\s*password\s+requisite\s+pam_pwhistory.so.*\s+${ARGS[$idx]}\s*$" /etc/pam.d/common-password ; then
        sed --follow-symlinks -i -E -e "s/^\\s*password\\s+requisite\\s+pam_pwhistory.so.*\$/& ${NEW_ARGS[$idx]}/" /etc/pam.d/common-password
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Set Deny For Failed Password Attempts [ref]

The SUSE Linux Enterprise 15 operating system must lock an account after - at most - 5 consecutive invalid access attempts.

Rationale:

By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, otherwise known as brute-force attacks, is reduced. Limits are imposed by locking the account. To configure the operating system to lock an account after three unsuccessful consecutive access attempts using pam_tally2.so, modify the content of both /etc/pam.d/login and /etc/pam.d/common-account as follows:

add or modify the pam_tally2.so module line in /etc/pam.d/login to ensure both onerr=fail and deny=5 are present. For example:
```
auth required pam_tally2.so onerr=fail silent audit deny=5
           
```
add or modify the following line in /etc/pam.d/common-account:
```
account required pam_tally2.so
```

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_passwords_pam_tally2

Identifiers:

CCE-85554-4

References:

disa	CCI-000044
pcidss	Req-8.1.6
os-srg	SRG-OS-000021-GPOS-00005
stigid	SLES-15-020010
cis	5.3.2
anssi	R31
pcidss4	8.3.4
stigref	SV-234867r854212_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-85554-4
  - DISA-STIG-SLES-15-020010
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
- name: XCCDF Value var_password_pam_tally2 # promote to variable
  set_fact:
    var_password_pam_tally2: !!str 5
  tags:
    - always

- name: Set Deny For Failed Password Attempts - Check if expected PAM module line
    is present in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    regexp: ^\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s*.*
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_line_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-85554-4
  - DISA-STIG-SLES-15-020010
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Include or update the PAM module line
    in /etc/pam.d/login
  block:

  - name: Set Deny For Failed Password Attempts - Check if required PAM module line
      is present in /etc/pam.d/login with different control
    ansible.builtin.lineinfile:
      path: /etc/pam.d/login
      regexp: ^\s*auth\s+.*\s+pam_tally2.so\s*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_other_control_present

  - name: Set Deny For Failed Password Attempts - Ensure the correct control for the
      required PAM module line in /etc/pam.d/login
    ansible.builtin.replace:
      dest: /etc/pam.d/login
      regexp: ^(\s*auth\s+).*(\bpam_tally2.so.*)
      replace: \1required \2
    register: result_pam_module_edit
    when:
    - result_pam_line_other_control_present.found == 1

  - name: Set Deny For Failed Password Attempts - Ensure the required PAM module line
      is included in /etc/pam.d/login
    ansible.builtin.lineinfile:
      dest: /etc/pam.d/login
      line: auth    required    pam_tally2.so
    register: result_pam_module_add
    when:
    - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
      > 1

  - name: Set Deny For Failed Password Attempts - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present is defined
    - result_authselect_present.stat.exists
    - |-
      (result_pam_module_add is defined and result_pam_module_add.changed)
       or (result_pam_module_edit is defined and result_pam_module_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_line_present.found is defined
  - result_pam_line_present.found == 0
  tags:
  - CCE-85554-4
  - DISA-STIG-SLES-15-020010
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Check if the required PAM module option
    is present in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    regexp: ^\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s*.*\sdeny\b
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_module_deny_option_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-85554-4
  - DISA-STIG-SLES-15-020010
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Ensure the "deny" PAM option for "pam_tally2.so"
    is included in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    backrefs: true
    regexp: ^(\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so.*)
    line: \1 deny={{ var_password_pam_tally2 }}
    state: present
  register: result_pam_deny_add
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module_deny_option_present.found == 0
  tags:
  - CCE-85554-4
  - DISA-STIG-SLES-15-020010
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Ensure the required value for "deny"
    PAM option from "pam_tally2.so" in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    backrefs: true
    regexp: ^(\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s+.*)(deny)=[0-9a-zA-Z]+\s*(.*)
    line: \1\2={{ var_password_pam_tally2 }} \3
  register: result_pam_deny_edit
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module_deny_option_present.found > 0
  tags:
  - CCE-85554-4
  - DISA-STIG-SLES-15-020010
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Check if expected PAM module line
    is present in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    regexp: ^\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s*.*
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_line_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-85554-4
  - DISA-STIG-SLES-15-020010
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Include or update the PAM module line
    in /etc/pam.d/login
  block:

  - name: Set Deny For Failed Password Attempts - Check if required PAM module line
      is present in /etc/pam.d/login with different control
    ansible.builtin.lineinfile:
      path: /etc/pam.d/login
      regexp: ^\s*auth\s+.*\s+pam_tally2.so\s*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_other_control_present

  - name: Set Deny For Failed Password Attempts - Ensure the correct control for the
      required PAM module line in /etc/pam.d/login
    ansible.builtin.replace:
      dest: /etc/pam.d/login
      regexp: ^(\s*auth\s+).*(\bpam_tally2.so.*)
      replace: \1required \2
    register: result_pam_module_edit
    when:
    - result_pam_line_other_control_present.found == 1

  - name: Set Deny For Failed Password Attempts - Ensure the required PAM module line
      is included in /etc/pam.d/login
    ansible.builtin.lineinfile:
      dest: /etc/pam.d/login
      insertafter: (fail)
      line: auth    required    pam_tally2.so
    register: result_pam_module_add
    when:
    - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
      > 1

  - name: Set Deny For Failed Password Attempts - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present is defined
    - result_authselect_present.stat.exists
    - |-
      (result_pam_module_add is defined and result_pam_module_add.changed)
       or (result_pam_module_edit is defined and result_pam_module_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_line_present.found is defined
  - result_pam_line_present.found == 0
  tags:
  - CCE-85554-4
  - DISA-STIG-SLES-15-020010
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Check if the required PAM module option
    is present in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    regexp: ^\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s*.*\sonerr\b
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_module_onerr_option_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-85554-4
  - DISA-STIG-SLES-15-020010
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Ensure the "onerr" PAM option for
    "pam_tally2.so" is included in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    backrefs: true
    regexp: ^(\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so.*)
    line: \1 onerr=fail
    state: present
  register: result_pam_onerr_add
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module_onerr_option_present.found == 0
  tags:
  - CCE-85554-4
  - DISA-STIG-SLES-15-020010
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Ensure the required value for "onerr"
    PAM option from "pam_tally2.so" in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    backrefs: true
    regexp: ^(\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s+.*)(onerr)=[0-9a-zA-Z]+\s*(.*)
    line: \1\2=fail \3
  register: result_pam_onerr_edit
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module_onerr_option_present.found > 0
  tags:
  - CCE-85554-4
  - DISA-STIG-SLES-15-020010
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Check if expected PAM module line
    is present in /etc/pam.d/common-account
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-account
    regexp: ^\s*account\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s*.*
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_line_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-85554-4
  - DISA-STIG-SLES-15-020010
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Include or update the PAM module line
    in /etc/pam.d/common-account
  block:

  - name: Set Deny For Failed Password Attempts - Check if required PAM module line
      is present in /etc/pam.d/common-account with different control
    ansible.builtin.lineinfile:
      path: /etc/pam.d/common-account
      regexp: ^\s*account\s+.*\s+pam_tally2.so\s*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_other_control_present

  - name: Set Deny For Failed Password Attempts - Ensure the correct control for the
      required PAM module line in /etc/pam.d/common-account
    ansible.builtin.replace:
      dest: /etc/pam.d/common-account
      regexp: ^(\s*account\s+).*(\bpam_tally2.so.*)
      replace: \1required \2
    register: result_pam_module_edit
    when:
    - result_pam_line_other_control_present.found == 1

  - name: Set Deny For Failed Password Attempts - Ensure the required PAM module line
      is included in /etc/pam.d/common-account
    ansible.builtin.lineinfile:
      dest: /etc/pam.d/common-account
      line: account    required    pam_tally2.so
    register: result_pam_module_add
    when:
    - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
      > 1

  - name: Set Deny For Failed Password Attempts - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present is defined
    - result_authselect_present.stat.exists
    - |-
      (result_pam_module_add is defined and result_pam_module_add.changed)
       or (result_pam_module_edit is defined and result_pam_module_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_line_present.found is defined
  - result_pam_line_present.found == 0
  tags:
  - CCE-85554-4
  - DISA-STIG-SLES-15-020010
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Check if the required PAM module option
    is present in /etc/pam.d/common-account
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-account
    regexp: ^\s*account\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s*.*\s\b
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_module__option_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-85554-4
  - DISA-STIG-SLES-15-020010
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Ensure the "" PAM option for "pam_tally2.so"
    is included in /etc/pam.d/common-account
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-account
    backrefs: true
    regexp: ^(\s*account\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so.*)
    line: \1
    state: present
  register: result_pam__add
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module__option_present.found == 0
  tags:
  - CCE-85554-4
  - DISA-STIG-SLES-15-020010
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_tally2='5'

# Use a non-number regexp to force update of the value of the deny option




if ! grep -qP '^\s*auth\s+'"required"'\s+pam_tally2.so\s*.*' "/etc/pam.d/login"; then
    # Line matching group + control + module was not found. Check group + module.
    if [ "$(grep -cP '^\s*auth\s+.*\s+pam_tally2.so\s*' "/etc/pam.d/login")" -eq 1 ]; then
        # The control is updated only if one single line matches.
        sed -i -E --follow-symlinks 's/^(\s*auth\s+).*(\bpam_tally2.so.*)/\1'"required"' \2/' "/etc/pam.d/login"
    else
        echo 'auth    '"required"'    pam_tally2.so' >> "/etc/pam.d/login"
    fi
fi
# Check the option
if ! grep -qP '^\s*auth\s+'"required"'\s+pam_tally2.so\s*.*\sdeny\b' "/etc/pam.d/login"; then
    sed -i -E --follow-symlinks '/\s*auth\s+'"required"'\s+pam_tally2.so.*/ s/$/ deny='"${var_password_pam_tally2}"'/' "/etc/pam.d/login"
else
    sed -i -E --follow-symlinks 's/(\s*auth\s+'"required"'\s+pam_tally2.so\s+.*)('"deny"'=)[[:alnum:]]+\s*(.*)/\1\2'"${var_password_pam_tally2}"' \3/' "/etc/pam.d/login"
fi
if ! grep -qP '^\s*auth\s+'"required"'\s+pam_tally2.so\s*.*' "/etc/pam.d/login"; then
    # Line matching group + control + module was not found. Check group + module.
    if [ "$(grep -cP '^\s*auth\s+.*\s+pam_tally2.so\s*' "/etc/pam.d/login")" -eq 1 ]; then
        # The control is updated only if one single line matches.
        sed -i -E --follow-symlinks 's/^(\s*auth\s+).*(\bpam_tally2.so.*)/\1'"required"' \2/' "/etc/pam.d/login"
    else
        LAST_MATCH_LINE=$(grep -nP "(fail)" "/etc/pam.d/login" | tail -n 1 | cut -d: -f 1)
        if [ ! -z $LAST_MATCH_LINE ]; then
            sed -i --follow-symlinks $LAST_MATCH_LINE' a auth     '"required"'    pam_tally2.so' "/etc/pam.d/login"
        else
            echo 'auth    '"required"'    pam_tally2.so' >> "/etc/pam.d/login"
        fi
    fi
fi
# Check the option
if ! grep -qP '^\s*auth\s+'"required"'\s+pam_tally2.so\s*.*\sonerr\b' "/etc/pam.d/login"; then
    sed -i -E --follow-symlinks '/\s*auth\s+'"required"'\s+pam_tally2.so.*/ s/$/ onerr='"fail"'/' "/etc/pam.d/login"
else
    sed -i -E --follow-symlinks 's/(\s*auth\s+'"required"'\s+pam_tally2.so\s+.*)('"onerr"'=)[[:alnum:]]+\s*(.*)/\1\2'"fail"' \3/' "/etc/pam.d/login"
fi
if ! grep -qP '^\s*account\s+'"required"'\s+pam_tally2.so\s*.*' "/etc/pam.d/common-account"; then
    # Line matching group + control + module was not found. Check group + module.
    if [ "$(grep -cP '^\s*account\s+.*\s+pam_tally2.so\s*' "/etc/pam.d/common-account")" -eq 1 ]; then
        # The control is updated only if one single line matches.
        sed -i -E --follow-symlinks 's/^(\s*account\s+).*(\bpam_tally2.so.*)/\1'"required"' \2/' "/etc/pam.d/common-account"
    else
        echo 'account    '"required"'    pam_tally2.so' >> "/etc/pam.d/common-account"
    fi
fi
# Check the option
if ! grep -qP '^\s*account\s+'"required"'\s+pam_tally2.so\s*.*\s\b' "/etc/pam.d/common-account"; then
    sed -i -E --follow-symlinks '/\s*account\s+'"required"'\s+pam_tally2.so.*/ s/$/ /' "/etc/pam.d/common-account"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Configure the root Account lock for Failed Password Attempts via pam_tally2 [ref]

This rule configures the system to lock out the root account after a number of incorrect login attempts using pam_tally2.so.

Rationale:

By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, also known as brute-forcing, is reduced. Limits are imposed by locking the account.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_passwords_pam_tally2_deny_root

Identifiers:

CCE-91281-6

References:

cis-csc	1, 12, 15, 16
cobit5	DSS05.04, DSS05.10, DSS06.10
disa	CCI-002238, CCI-000044
isa-62443-2009	4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
ism	0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013	A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nist	CM-6(a), AC-7(b), IA-5(c)
nist-csf	PR.AC-7
ospp	FMT_MOF_EXT.1
os-srg	SRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005
cis	5.3.2
anssi	R31

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91281-6
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_tally2_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_tally2 # promote to variable
  set_fact:
    var_password_pam_tally2: !!str 5
  tags:
    - always

- name: Configure the root Account lock for Failed Password Attempts via pam_tally2
    - Ensure the "onerr=fail" option from "pam_tally2.so" is not present in /etc/pam.d/login
  ansible.builtin.replace:
    dest: /etc/pam.d/login
    regexp: (.*auth.*{{ 'required' | regex_escape() }}.*pam_tally2.so.*)\bonerr=fail\b=?[0-9a-zA-Z]*(.*)
    replace: \1\2
  register: result_pam_option_removal
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91281-6
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_tally2_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account lock for Failed Password Attempts via pam_tally2
    - Check if expected PAM module line is present in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    regexp: ^\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s*.*
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_line_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91281-6
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_tally2_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account lock for Failed Password Attempts via pam_tally2
    - Include or update the PAM module line in /etc/pam.d/login
  block:

  - name: Configure the root Account lock for Failed Password Attempts via pam_tally2
      - Check if required PAM module line is present in /etc/pam.d/login with different
      control
    ansible.builtin.lineinfile:
      path: /etc/pam.d/login
      regexp: ^\s*auth\s+.*\s+pam_tally2.so\s*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_other_control_present

  - name: Configure the root Account lock for Failed Password Attempts via pam_tally2
      - Ensure the correct control for the required PAM module line in /etc/pam.d/login
    ansible.builtin.replace:
      dest: /etc/pam.d/login
      regexp: ^(\s*auth\s+).*(\bpam_tally2.so.*)
      replace: \1required \2
    register: result_pam_module_edit
    when:
    - result_pam_line_other_control_present.found == 1

  - name: Configure the root Account lock for Failed Password Attempts via pam_tally2
      - Ensure the required PAM module line is included in /etc/pam.d/login
    ansible.builtin.lineinfile:
      dest: /etc/pam.d/login
      line: auth    required    pam_tally2.so
    register: result_pam_module_add
    when:
    - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
      > 1

  - name: Configure the root Account lock for Failed Password Attempts via pam_tally2
      - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present is defined
    - result_authselect_present.stat.exists
    - |-
      (result_pam_module_add is defined and result_pam_module_add.changed)
       or (result_pam_module_edit is defined and result_pam_module_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_line_present.found is defined
  - result_pam_line_present.found == 0
  tags:
  - CCE-91281-6
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_tally2_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account lock for Failed Password Attempts via pam_tally2
    - Check if the required PAM module option is present in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    regexp: ^\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s*.*\sdeny\b
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_module_deny_option_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91281-6
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_tally2_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account lock for Failed Password Attempts via pam_tally2
    - Ensure the "deny" PAM option for "pam_tally2.so" is included in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    backrefs: true
    regexp: ^(\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so.*)
    line: \1 deny={{ var_password_pam_tally2 }}
    state: present
  register: result_pam_deny_add
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module_deny_option_present.found == 0
  tags:
  - CCE-91281-6
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_tally2_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account lock for Failed Password Attempts via pam_tally2
    - Ensure the required value for "deny" PAM option from "pam_tally2.so" in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    backrefs: true
    regexp: ^(\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s+.*)(deny)=[0-9a-zA-Z]+\s*(.*)
    line: \1\2={{ var_password_pam_tally2 }} \3
  register: result_pam_deny_edit
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module_deny_option_present.found > 0
  tags:
  - CCE-91281-6
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_tally2_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account lock for Failed Password Attempts via pam_tally2
    - Check if expected PAM module line is present in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    regexp: ^\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s*.*
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_line_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91281-6
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_tally2_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account lock for Failed Password Attempts via pam_tally2
    - Include or update the PAM module line in /etc/pam.d/login
  block:

  - name: Configure the root Account lock for Failed Password Attempts via pam_tally2
      - Check if required PAM module line is present in /etc/pam.d/login with different
      control
    ansible.builtin.lineinfile:
      path: /etc/pam.d/login
      regexp: ^\s*auth\s+.*\s+pam_tally2.so\s*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_other_control_present

  - name: Configure the root Account lock for Failed Password Attempts via pam_tally2
      - Ensure the correct control for the required PAM module line in /etc/pam.d/login
    ansible.builtin.replace:
      dest: /etc/pam.d/login
      regexp: ^(\s*auth\s+).*(\bpam_tally2.so.*)
      replace: \1required \2
    register: result_pam_module_edit
    when:
    - result_pam_line_other_control_present.found == 1

  - name: Configure the root Account lock for Failed Password Attempts via pam_tally2
      - Ensure the required PAM module line is included in /etc/pam.d/login
    ansible.builtin.lineinfile:
      dest: /etc/pam.d/login
      line: auth    required    pam_tally2.so
    register: result_pam_module_add
    when:
    - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
      > 1

  - name: Configure the root Account lock for Failed Password Attempts via pam_tally2
      - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present is defined
    - result_authselect_present.stat.exists
    - |-
      (result_pam_module_add is defined and result_pam_module_add.changed)
       or (result_pam_module_edit is defined and result_pam_module_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_line_present.found is defined
  - result_pam_line_present.found == 0
  tags:
  - CCE-91281-6
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_tally2_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account lock for Failed Password Attempts via pam_tally2
    - Check if the required PAM module option is present in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    regexp: ^\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s*.*\seven_deny_root\b
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_module_even_deny_root_option_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91281-6
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_tally2_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account lock for Failed Password Attempts via pam_tally2
    - Ensure the "even_deny_root" PAM option for "pam_tally2.so" is included in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    backrefs: true
    regexp: ^(\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so.*)
    line: \1 even_deny_root
    state: present
  register: result_pam_even_deny_root_add
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module_even_deny_root_option_present.found == 0
  tags:
  - CCE-91281-6
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_tally2_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account lock for Failed Password Attempts via pam_tally2
    - Check if expected PAM module line is present in /etc/pam.d/common-account
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-account
    regexp: ^\s*account\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s*.*
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_line_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91281-6
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_tally2_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account lock for Failed Password Attempts via pam_tally2
    - Include or update the PAM module line in /etc/pam.d/common-account
  block:

  - name: Configure the root Account lock for Failed Password Attempts via pam_tally2
      - Check if required PAM module line is present in /etc/pam.d/common-account
      with different control
    ansible.builtin.lineinfile:
      path: /etc/pam.d/common-account
      regexp: ^\s*account\s+.*\s+pam_tally2.so\s*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_other_control_present

  - name: Configure the root Account lock for Failed Password Attempts via pam_tally2
      - Ensure the correct control for the required PAM module line in /etc/pam.d/common-account
    ansible.builtin.replace:
      dest: /etc/pam.d/common-account
      regexp: ^(\s*account\s+).*(\bpam_tally2.so.*)
      replace: \1required \2
    register: result_pam_module_edit
    when:
    - result_pam_line_other_control_present.found == 1

  - name: Configure the root Account lock for Failed Password Attempts via pam_tally2
      - Ensure the required PAM module line is included in /etc/pam.d/common-account
    ansible.builtin.lineinfile:
      dest: /etc/pam.d/common-account
      line: account    required    pam_tally2.so
    register: result_pam_module_add
    when:
    - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
      > 1

  - name: Configure the root Account lock for Failed Password Attempts via pam_tally2
      - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present is defined
    - result_authselect_present.stat.exists
    - |-
      (result_pam_module_add is defined and result_pam_module_add.changed)
       or (result_pam_module_edit is defined and result_pam_module_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_line_present.found is defined
  - result_pam_line_present.found == 0
  tags:
  - CCE-91281-6
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_tally2_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account lock for Failed Password Attempts via pam_tally2
    - Check if the required PAM module option is present in /etc/pam.d/common-account
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-account
    regexp: ^\s*account\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s*.*\s\b
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_module__option_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91281-6
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_tally2_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account lock for Failed Password Attempts via pam_tally2
    - Ensure the "" PAM option for "pam_tally2.so" is included in /etc/pam.d/common-account
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-account
    backrefs: true
    regexp: ^(\s*account\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so.*)
    line: \1
    state: present
  register: result_pam__add
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module__option_present.found == 0
  tags:
  - CCE-91281-6
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_tally2_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_tally2='5'



if grep -qP '^\s*auth\s+'"required"'\s+pam_tally2.so\s.*\bonerr=fail\b' "/etc/pam.d/login"; then
    sed -i -E --follow-symlinks 's/(.*auth.*'"required"'.*pam_tally2.so.*)\sonerr=fail=?[[:alnum:]]*(.*)/\1\2/g' "/etc/pam.d/login"
fi
if ! grep -qP '^\s*auth\s+'"required"'\s+pam_tally2.so\s*.*' "/etc/pam.d/login"; then
    # Line matching group + control + module was not found. Check group + module.
    if [ "$(grep -cP '^\s*auth\s+.*\s+pam_tally2.so\s*' "/etc/pam.d/login")" -eq 1 ]; then
        # The control is updated only if one single line matches.
        sed -i -E --follow-symlinks 's/^(\s*auth\s+).*(\bpam_tally2.so.*)/\1'"required"' \2/' "/etc/pam.d/login"
    else
        echo 'auth    '"required"'    pam_tally2.so' >> "/etc/pam.d/login"
    fi
fi
# Check the option
if ! grep -qP '^\s*auth\s+'"required"'\s+pam_tally2.so\s*.*\sdeny\b' "/etc/pam.d/login"; then
    sed -i -E --follow-symlinks '/\s*auth\s+'"required"'\s+pam_tally2.so.*/ s/$/ deny='"${var_password_pam_tally2}"'/' "/etc/pam.d/login"
else
    sed -i -E --follow-symlinks 's/(\s*auth\s+'"required"'\s+pam_tally2.so\s+.*)('"deny"'=)[[:alnum:]]+\s*(.*)/\1\2'"${var_password_pam_tally2}"' \3/' "/etc/pam.d/login"
fi
if ! grep -qP '^\s*auth\s+'"required"'\s+pam_tally2.so\s*.*' "/etc/pam.d/login"; then
    # Line matching group + control + module was not found. Check group + module.
    if [ "$(grep -cP '^\s*auth\s+.*\s+pam_tally2.so\s*' "/etc/pam.d/login")" -eq 1 ]; then
        # The control is updated only if one single line matches.
        sed -i -E --follow-symlinks 's/^(\s*auth\s+).*(\bpam_tally2.so.*)/\1'"required"' \2/' "/etc/pam.d/login"
    else
        echo 'auth    '"required"'    pam_tally2.so' >> "/etc/pam.d/login"
    fi
fi
# Check the option
if ! grep -qP '^\s*auth\s+'"required"'\s+pam_tally2.so\s*.*\seven_deny_root\b' "/etc/pam.d/login"; then
    sed -i -E --follow-symlinks '/\s*auth\s+'"required"'\s+pam_tally2.so.*/ s/$/ even_deny_root/' "/etc/pam.d/login"
fi
if ! grep -qP '^\s*account\s+'"required"'\s+pam_tally2.so\s*.*' "/etc/pam.d/common-account"; then
    # Line matching group + control + module was not found. Check group + module.
    if [ "$(grep -cP '^\s*account\s+.*\s+pam_tally2.so\s*' "/etc/pam.d/common-account")" -eq 1 ]; then
        # The control is updated only if one single line matches.
        sed -i -E --follow-symlinks 's/^(\s*account\s+).*(\bpam_tally2.so.*)/\1'"required"' \2/' "/etc/pam.d/common-account"
    else
        echo 'account    '"required"'    pam_tally2.so' >> "/etc/pam.d/common-account"
    fi
fi
# Check the option
if ! grep -qP '^\s*account\s+'"required"'\s+pam_tally2.so\s*.*\s\b' "/etc/pam.d/common-account"; then
    sed -i -E --follow-symlinks '/\s*account\s+'"required"'\s+pam_tally2.so.*/ s/$/ /' "/etc/pam.d/common-account"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Set Lockout Time for Failed Password Attempts using pam_tally2 [ref]

This rule configures the system to lock out accounts during a specified time period after a number of incorrect login attempts using pam_tally2.so.

Rationale:

By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, also known as brute-forcing, is reduced. Limits are imposed by locking the account.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_passwords_pam_tally2_unlock_time

Identifiers:

CCE-91282-4

References:

cis-csc	1, 12, 15, 16
cobit5	DSS05.04, DSS05.10, DSS06.10
disa	CCI-002238, CCI-000044
isa-62443-2009	4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
ism	0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013	A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nist	CM-6(a), AC-7(b), IA-5(c)
nist-csf	PR.AC-7
ospp	FMT_MOF_EXT.1
pcidss	Req-8.1.7
os-srg	SRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005
cis	5.3.2
anssi	R31
pcidss4	8.3.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91282-4
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_tally2_unlock_time # promote to variable
  set_fact:
    var_accounts_passwords_pam_tally2_unlock_time: !!str 1800
  tags:
    - always

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Check if
    expected PAM module line is present in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    regexp: ^\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s*.*
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_line_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91282-4
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Include or
    update the PAM module line in /etc/pam.d/login
  block:

  - name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Check if
      required PAM module line is present in /etc/pam.d/login with different control
    ansible.builtin.lineinfile:
      path: /etc/pam.d/login
      regexp: ^\s*auth\s+.*\s+pam_tally2.so\s*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_other_control_present

  - name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Ensure
      the correct control for the required PAM module line in /etc/pam.d/login
    ansible.builtin.replace:
      dest: /etc/pam.d/login
      regexp: ^(\s*auth\s+).*(\bpam_tally2.so.*)
      replace: \1required \2
    register: result_pam_module_edit
    when:
    - result_pam_line_other_control_present.found == 1

  - name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Ensure
      the required PAM module line is included in /etc/pam.d/login
    ansible.builtin.lineinfile:
      dest: /etc/pam.d/login
      line: auth    required    pam_tally2.so
    register: result_pam_module_add
    when:
    - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
      > 1

  - name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Ensure
      authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present is defined
    - result_authselect_present.stat.exists
    - |-
      (result_pam_module_add is defined and result_pam_module_add.changed)
       or (result_pam_module_edit is defined and result_pam_module_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_line_present.found is defined
  - result_pam_line_present.found == 0
  tags:
  - CCE-91282-4
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Check if
    the required PAM module option is present in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    regexp: ^\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s*.*\sunlock_time\b
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_module_unlock_time_option_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91282-4
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Ensure the
    "unlock_time" PAM option for "pam_tally2.so" is included in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    backrefs: true
    regexp: ^(\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so.*)
    line: \1 unlock_time={{ var_accounts_passwords_pam_tally2_unlock_time }}
    state: present
  register: result_pam_unlock_time_add
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module_unlock_time_option_present.found == 0
  tags:
  - CCE-91282-4
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Ensure the
    required value for "unlock_time" PAM option from "pam_tally2.so" in /etc/pam.d/login
  ansible.builtin.lineinfile:
    path: /etc/pam.d/login
    backrefs: true
    regexp: ^(\s*auth\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s+.*)(unlock_time)=[0-9a-zA-Z]+\s*(.*)
    line: \1\2={{ var_accounts_passwords_pam_tally2_unlock_time }} \3
  register: result_pam_unlock_time_edit
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module_unlock_time_option_present.found > 0
  tags:
  - CCE-91282-4
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Check if
    expected PAM module line is present in /etc/pam.d/common-account
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-account
    regexp: ^\s*account\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s*.*
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_line_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91282-4
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Include or
    update the PAM module line in /etc/pam.d/common-account
  block:

  - name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Check if
      required PAM module line is present in /etc/pam.d/common-account with different
      control
    ansible.builtin.lineinfile:
      path: /etc/pam.d/common-account
      regexp: ^\s*account\s+.*\s+pam_tally2.so\s*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_other_control_present

  - name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Ensure
      the correct control for the required PAM module line in /etc/pam.d/common-account
    ansible.builtin.replace:
      dest: /etc/pam.d/common-account
      regexp: ^(\s*account\s+).*(\bpam_tally2.so.*)
      replace: \1required \2
    register: result_pam_module_edit
    when:
    - result_pam_line_other_control_present.found == 1

  - name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Ensure
      the required PAM module line is included in /etc/pam.d/common-account
    ansible.builtin.lineinfile:
      dest: /etc/pam.d/common-account
      line: account    required    pam_tally2.so
    register: result_pam_module_add
    when:
    - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
      > 1

  - name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Ensure
      authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present is defined
    - result_authselect_present.stat.exists
    - |-
      (result_pam_module_add is defined and result_pam_module_add.changed)
       or (result_pam_module_edit is defined and result_pam_module_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_line_present.found is defined
  - result_pam_line_present.found == 0
  tags:
  - CCE-91282-4
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Check if
    the required PAM module option is present in /etc/pam.d/common-account
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-account
    regexp: ^\s*account\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so\s*.*\s\b
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_module__option_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-91282-4
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts using pam_tally2 - Ensure the
    "" PAM option for "pam_tally2.so" is included in /etc/pam.d/common-account
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-account
    backrefs: true
    regexp: ^(\s*account\s+{{ 'required' | regex_escape() }}\s+pam_tally2.so.*)
    line: \1
    state: present
  register: result_pam__add
  when:
  - '"pam" in ansible_facts.packages'
  - result_pam_module__option_present.found == 0
  tags:
  - CCE-91282-4
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_tally2_unlock_time='1800'

# Use a non-number regexp to force update of the value of the deny option
if ! grep -qP '^\s*auth\s+'"required"'\s+pam_tally2.so\s*.*' "/etc/pam.d/login"; then
    # Line matching group + control + module was not found. Check group + module.
    if [ "$(grep -cP '^\s*auth\s+.*\s+pam_tally2.so\s*' "/etc/pam.d/login")" -eq 1 ]; then
        # The control is updated only if one single line matches.
        sed -i -E --follow-symlinks 's/^(\s*auth\s+).*(\bpam_tally2.so.*)/\1'"required"' \2/' "/etc/pam.d/login"
    else
        echo 'auth    '"required"'    pam_tally2.so' >> "/etc/pam.d/login"
    fi
fi
# Check the option
if ! grep -qP '^\s*auth\s+'"required"'\s+pam_tally2.so\s*.*\sunlock_time\b' "/etc/pam.d/login"; then
    sed -i -E --follow-symlinks '/\s*auth\s+'"required"'\s+pam_tally2.so.*/ s/$/ unlock_time='"${var_accounts_passwords_pam_tally2_unlock_time}"'/' "/etc/pam.d/login"
else
    sed -i -E --follow-symlinks 's/(\s*auth\s+'"required"'\s+pam_tally2.so\s+.*)('"unlock_time"'=)[[:alnum:]]+\s*(.*)/\1\2'"${var_accounts_passwords_pam_tally2_unlock_time}"' \3/' "/etc/pam.d/login"
fi
if ! grep -qP '^\s*account\s+'"required"'\s+pam_tally2.so\s*.*' "/etc/pam.d/common-account"; then
    # Line matching group + control + module was not found. Check group + module.
    if [ "$(grep -cP '^\s*account\s+.*\s+pam_tally2.so\s*' "/etc/pam.d/common-account")" -eq 1 ]; then
        # The control is updated only if one single line matches.
        sed -i -E --follow-symlinks 's/^(\s*account\s+).*(\bpam_tally2.so.*)/\1'"required"' \2/' "/etc/pam.d/common-account"
    else
        echo 'account    '"required"'    pam_tally2.so' >> "/etc/pam.d/common-account"
    fi
fi
# Check the option
if ! grep -qP '^\s*account\s+'"required"'\s+pam_tally2.so\s*.*\s\b' "/etc/pam.d/common-account"; then
    sed -i -E --follow-symlinks '/\s*account\s+'"required"'\s+pam_tally2.so.*/ s/$/ /' "/etc/pam.d/common-account"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Set Password Quality Requirements Group contains 1 group and 6 rules

[ref] The default pam_pwquality PAM module provides strength checking for passwords. It performs a number of checks, such as making sure passwords are not similar to dictionary words, are of at least a certain length, are not the previous password reversed, and are not simply a change of case from the previous password. It can also require passwords to be in certain character classes. The pam_pwquality module is the preferred way of configuring password requirements.

The man pages pam_pwquality(8) provide information on the capabilities and configuration of each.

Group Set Password Quality Requirements, if using pam_cracklib Group contains 6 rules

[ref] The pam_cracklib PAM module can be configured to meet requirements for a variety of policies.

For example, to configure pam_cracklib to require at least one uppercase character, lowercase character, digit, and other (special) character, locate the following line in /etc/pam.d/system-auth:

password requisite pam_cracklib.so try_first_pass retry=3

and then alter it to read:

password required pam_cracklib.so try_first_pass retry=3 maxrepeat=3 minlen=14 dcredit=-1 ucredit=-1 ocredit=-1 lcredit=-1 difok=4

If no such line exists, add one as the first line of the password section in /etc/pam.d/system-auth. The arguments can be modified to ensure compliance with your organization's security policy. Discussion of each parameter follows.

Warning: Note that the password quality requirements are not enforced for the root account for some reason.

Rule Set Password Strength Minimum Digit Characters [ref]

The pam_cracklib module's dcredit parameter controls requirements for usage of digits in a password. When set to a negative number, any password will be required to contain that many digits. When set to a positive number, pam_cracklib will grant +1 additional length credit for each digit. Add dcredit=-1 after pam_cracklib.so to require use of a digit in passwords.

Rationale:

Requiring digits makes password guessing attacks more difficult by ensuring a larger search space.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_cracklib_accounts_password_pam_dcredit

Identifiers:

CCE-85564-3

References:

disa	CCI-000194
pcidss	Req-8.2.3
os-srg	SRG-OS-000071-GPOS-00039
stigid	SLES-15-020150
cis	5.3.1
anssi	R31
pcidss4	8.3.6
stigref	SV-234884r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value var_password_pam_dcredit # promote to variable
  set_fact:
    var_password_pam_dcredit: !!str -1
  tags:
    - always

- name: Set control_flag fact
  set_fact:
    control_flag: requisite
  tags:
  - CCE-85564-3
  - DISA-STIG-SLES-15-020150
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check to see if 'pam_cracklib.so' module is configured in '/etc/pam.d/common-password'
  shell: |
    set -o pipefail
    grep -E '^\s*password\s+\S+\s+pam_cracklib.so' /etc/pam.d/common-password || true
  register: check_pam_module_result
  tags:
  - CCE-85564-3
  - DISA-STIG-SLES-15-020150
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure 'pam_cracklib.so' module in '/etc/pam.d/common-password'
  lineinfile:
    path: /etc/pam.d/common-password
    line: password requisite pam_cracklib.so
    state: present
  when: check_pam_module_result.stdout is defined and '"pam_cracklib.so" not in check_pam_module_result.stdout'
  tags:
  - CCE-85564-3
  - DISA-STIG-SLES-15-020150
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure 'pam_cracklib.so' module has conforming control flag
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+)\S+(\s+pam_cracklib.so\s+.*)
    line: \g<1>requisite\g<2>
    backrefs: true
  when: control_flag|length
  tags:
  - CCE-85564-3
  - DISA-STIG-SLES-15-020150
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure "pam_cracklib.so" module has argument "dcredit={{ var_password_pam_dcredit
    }}"
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+requisite\s+pam_cracklib.so(?:\s+\S+)*\s+dcredit=)(?:\S+)((\s+\S+)*\s*\\*\s*)$
    line: \g<1>{{ var_password_pam_dcredit }}\g<2>
    backrefs: true
  tags:
  - CCE-85564-3
  - DISA-STIG-SLES-15-020150
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check the presence of "dcredit" argument in "pam_cracklib.so" module
  shell: |
    set -o pipefail
    grep -E '^\s*password\s+requisite\s+pam_cracklib.so.*\s+dcredit(=|\s|\s*$)' /etc/pam.d/common-password || true
  register: check_pam_module_argument_result
  tags:
  - CCE-85564-3
  - DISA-STIG-SLES-15-020150
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Add "dcredit" argument to "pam_cracklib.so" module
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+requisite\s+pam_cracklib.so)((\s+\S+)*\s*(\\)*$)
    line: \g<1> dcredit={{ var_password_pam_dcredit }}\g<2>
    backrefs: true
  when: check_pam_module_argument_result is not skipped and '"dcredit" not in check_pam_module_argument_result.stdout'
  tags:
  - CCE-85564-3
  - DISA-STIG-SLES-15-020150
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict


declare -a VALUES=()
declare -a VALUE_NAMES=()
declare -a ARGS=()
declare -a NEW_ARGS=()

var_password_pam_dcredit='-1'

VALUES+=("$var_password_pam_dcredit")
VALUE_NAMES+=("dcredit")
ARGS+=("")
NEW_ARGS+=("")

for idx in "${!VALUES[@]}"
do
    if [ -e "/etc/pam.d/common-password" ] ; then
        valueRegex="${VALUES[$idx]}" defaultValue="${VALUES[$idx]}"
        # non-empty values need to be preceded by an equals sign
        [ -n "${valueRegex}" ] && valueRegex="=${valueRegex}"
        # add an equals sign to non-empty values
        [ -n "${defaultValue}" ] && defaultValue="=${defaultValue}"

        # fix the value for 'option' if one exists but does not match 'valueRegex'
        if grep -q -P "^\\s*password\\s+requisite\\s+pam_cracklib.so(\\s.+)?\\s+${VALUE_NAMES[$idx]}(?"'!'"${valueRegex}(\\s|\$))" < "/etc/pam.d/common-password" ; then
            sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_cracklib.so(\\s.+)?\\s)${VALUE_NAMES[$idx]}=[^[:space:]]*/\\1${VALUE_NAMES[$idx]}${defaultValue}/" "/etc/pam.d/common-password"

        # add 'option=default' if option is not set
        elif grep -q -E "^\\s*password\\s+requisite\\s+pam_cracklib.so" < "/etc/pam.d/common-password" &&
                grep    -E "^\\s*password\\s+requisite\\s+pam_cracklib.so" < "/etc/pam.d/common-password" | grep -q -E -v "\\s${VALUE_NAMES[$idx]}(=|\\s|\$)" ; then

            sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_cracklib.so[^\\n]*)/\\1 ${VALUE_NAMES[$idx]}${defaultValue}/" "/etc/pam.d/common-password"
        # add a new entry if none exists
        elif ! grep -q -P "^\\s*password\\s+requisite\\s+pam_cracklib.so(\\s.+)?\\s+${VALUE_NAMES[$idx]}${valueRegex}(\\s|\$)" < "/etc/pam.d/common-password" ; then
            echo "password requisite pam_cracklib.so ${VALUE_NAMES[$idx]}${defaultValue}" >> "/etc/pam.d/common-password"
        fi
    else
        echo "/etc/pam.d/common-password doesn't exist" >&2
    fi
done

for idx in "${!ARGS[@]}"
do
    if ! grep -q -P "^\s*password\s+requisite\s+pam_cracklib.so.*\s+${ARGS[$idx]}\s*$" /etc/pam.d/common-password ; then
        sed --follow-symlinks -i -E -e "s/^\\s*password\\s+requisite\\s+pam_cracklib.so.*\$/& ${NEW_ARGS[$idx]}/" /etc/pam.d/common-password
    fi
done

Rule Set Password Strength Minimum Lowercase Characters [ref]

The pam_cracklib module's lcredit= parameter controls requirements for usage of lowercase letters in a password. When set to a negative number, any password will be required to contain that many lowercase characters. When set to a positive number, pam_cracklib will grant +1 additional length credit for each lowercase character. Add lcredit=-1 after pam_cracklib.so to require use of a lowercase character in passwords.

Rationale:

Requiring a minimum number of lowercase characters makes password guessing attacks more difficult by ensuring a larger search space.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_cracklib_accounts_password_pam_lcredit

Identifiers:

CCE-85676-5

References:

disa	CCI-000193
nist	IA-5(1)(a), IA-5(1).1(v)
pcidss	Req-8.2.3
os-srg	SRG-OS-000070-GPOS-00038
stigid	SLES-15-020140
cis	5.3.1
anssi	R31
pcidss4	8.3.6
stigref	SV-234883r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value var_password_pam_lcredit # promote to variable
  set_fact:
    var_password_pam_lcredit: !!str -1
  tags:
    - always

- name: Set control_flag fact
  set_fact:
    control_flag: requisite
  tags:
  - CCE-85676-5
  - DISA-STIG-SLES-15-020140
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(1).1(v)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check to see if 'pam_cracklib.so' module is configured in '/etc/pam.d/common-password'
  shell: |
    set -o pipefail
    grep -E '^\s*password\s+\S+\s+pam_cracklib.so' /etc/pam.d/common-password || true
  register: check_pam_module_result
  tags:
  - CCE-85676-5
  - DISA-STIG-SLES-15-020140
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(1).1(v)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure 'pam_cracklib.so' module in '/etc/pam.d/common-password'
  lineinfile:
    path: /etc/pam.d/common-password
    line: password requisite pam_cracklib.so
    state: present
  when: check_pam_module_result.stdout is defined and '"pam_cracklib.so" not in check_pam_module_result.stdout'
  tags:
  - CCE-85676-5
  - DISA-STIG-SLES-15-020140
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(1).1(v)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure 'pam_cracklib.so' module has conforming control flag
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+)\S+(\s+pam_cracklib.so\s+.*)
    line: \g<1>requisite\g<2>
    backrefs: true
  when: control_flag|length
  tags:
  - CCE-85676-5
  - DISA-STIG-SLES-15-020140
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(1).1(v)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure "pam_cracklib.so" module has argument "lcredit={{ var_password_pam_lcredit
    }}"
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+requisite\s+pam_cracklib.so(?:\s+\S+)*\s+lcredit=)(?:\S+)((\s+\S+)*\s*\\*\s*)$
    line: \g<1>{{ var_password_pam_lcredit }}\g<2>
    backrefs: true
  tags:
  - CCE-85676-5
  - DISA-STIG-SLES-15-020140
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(1).1(v)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check the presence of "lcredit" argument in "pam_cracklib.so" module
  shell: |
    set -o pipefail
    grep -E '^\s*password\s+requisite\s+pam_cracklib.so.*\s+lcredit(=|\s|\s*$)' /etc/pam.d/common-password || true
  register: check_pam_module_argument_result
  tags:
  - CCE-85676-5
  - DISA-STIG-SLES-15-020140
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(1).1(v)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Add "lcredit" argument to "pam_cracklib.so" module
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+requisite\s+pam_cracklib.so)((\s+\S+)*\s*(\\)*$)
    line: \g<1> lcredit={{ var_password_pam_lcredit }}\g<2>
    backrefs: true
  when: check_pam_module_argument_result is not skipped and '"lcredit" not in check_pam_module_argument_result.stdout'
  tags:
  - CCE-85676-5
  - DISA-STIG-SLES-15-020140
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(1).1(v)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict


declare -a VALUES=()
declare -a VALUE_NAMES=()
declare -a ARGS=()
declare -a NEW_ARGS=()

var_password_pam_lcredit='-1'

VALUES+=("$var_password_pam_lcredit")
VALUE_NAMES+=("lcredit")
ARGS+=("")
NEW_ARGS+=("")

for idx in "${!VALUES[@]}"
do
    if [ -e "/etc/pam.d/common-password" ] ; then
        valueRegex="${VALUES[$idx]}" defaultValue="${VALUES[$idx]}"
        # non-empty values need to be preceded by an equals sign
        [ -n "${valueRegex}" ] && valueRegex="=${valueRegex}"
        # add an equals sign to non-empty values
        [ -n "${defaultValue}" ] && defaultValue="=${defaultValue}"

        # fix the value for 'option' if one exists but does not match 'valueRegex'
        if grep -q -P "^\\s*password\\s+requisite\\s+pam_cracklib.so(\\s.+)?\\s+${VALUE_NAMES[$idx]}(?"'!'"${valueRegex}(\\s|\$))" < "/etc/pam.d/common-password" ; then
            sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_cracklib.so(\\s.+)?\\s)${VALUE_NAMES[$idx]}=[^[:space:]]*/\\1${VALUE_NAMES[$idx]}${defaultValue}/" "/etc/pam.d/common-password"

        # add 'option=default' if option is not set
        elif grep -q -E "^\\s*password\\s+requisite\\s+pam_cracklib.so" < "/etc/pam.d/common-password" &&
                grep    -E "^\\s*password\\s+requisite\\s+pam_cracklib.so" < "/etc/pam.d/common-password" | grep -q -E -v "\\s${VALUE_NAMES[$idx]}(=|\\s|\$)" ; then

            sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_cracklib.so[^\\n]*)/\\1 ${VALUE_NAMES[$idx]}${defaultValue}/" "/etc/pam.d/common-password"
        # add a new entry if none exists
        elif ! grep -q -P "^\\s*password\\s+requisite\\s+pam_cracklib.so(\\s.+)?\\s+${VALUE_NAMES[$idx]}${valueRegex}(\\s|\$)" < "/etc/pam.d/common-password" ; then
            echo "password requisite pam_cracklib.so ${VALUE_NAMES[$idx]}${defaultValue}" >> "/etc/pam.d/common-password"
        fi
    else
        echo "/etc/pam.d/common-password doesn't exist" >&2
    fi
done

for idx in "${!ARGS[@]}"
do
    if ! grep -q -P "^\s*password\s+requisite\s+pam_cracklib.so.*\s+${ARGS[$idx]}\s*$" /etc/pam.d/common-password ; then
        sed --follow-symlinks -i -E -e "s/^\\s*password\\s+requisite\\s+pam_cracklib.so.*\$/& ${NEW_ARGS[$idx]}/" /etc/pam.d/common-password
    fi
done

Rule Set Password Minimum Length [ref]

The pam_cracklib module's minlen parameter controls requirements for minimum characters required in a password. Add

minlen=14

to set minimum password length requirements.

Rationale:

Password length is one factor of several that helps to determine strength and how long it takes to crack a password. Use of more characters in a password helps to exponentially increase the time and/or resources required to compromise the password.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_cracklib_accounts_password_pam_minlen

Identifiers:

CCE-85573-4

References:

disa	CCI-000205
pcidss	Req-8.2.3
os-srg	SRG-OS-000078-GPOS-00046
stigid	SLES-15-020260
cis	5.3.1
anssi	R31
pcidss4	8.3.6
stigref	SV-234895r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value var_password_pam_minlen # promote to variable
  set_fact:
    var_password_pam_minlen: !!str 14
  tags:
    - always

- name: Set control_flag fact
  set_fact:
    control_flag: requisite
  tags:
  - CCE-85573-4
  - DISA-STIG-SLES-15-020260
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check to see if 'pam_cracklib.so' module is configured in '/etc/pam.d/common-password'
  shell: |
    set -o pipefail
    grep -E '^\s*password\s+\S+\s+pam_cracklib.so' /etc/pam.d/common-password || true
  register: check_pam_module_result
  tags:
  - CCE-85573-4
  - DISA-STIG-SLES-15-020260
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure 'pam_cracklib.so' module in '/etc/pam.d/common-password'
  lineinfile:
    path: /etc/pam.d/common-password
    line: password requisite pam_cracklib.so
    state: present
  when: check_pam_module_result.stdout is defined and '"pam_cracklib.so" not in check_pam_module_result.stdout'
  tags:
  - CCE-85573-4
  - DISA-STIG-SLES-15-020260
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure 'pam_cracklib.so' module has conforming control flag
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+)\S+(\s+pam_cracklib.so\s+.*)
    line: \g<1>requisite\g<2>
    backrefs: true
  when: control_flag|length
  tags:
  - CCE-85573-4
  - DISA-STIG-SLES-15-020260
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure "pam_cracklib.so" module has argument "minlen={{ var_password_pam_minlen
    }}"
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+requisite\s+pam_cracklib.so(?:\s+\S+)*\s+minlen=)(?:\S+)((\s+\S+)*\s*\\*\s*)$
    line: \g<1>{{ var_password_pam_minlen }}\g<2>
    backrefs: true
  tags:
  - CCE-85573-4
  - DISA-STIG-SLES-15-020260
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check the presence of "minlen" argument in "pam_cracklib.so" module
  shell: |
    set -o pipefail
    grep -E '^\s*password\s+requisite\s+pam_cracklib.so.*\s+minlen(=|\s|\s*$)' /etc/pam.d/common-password || true
  register: check_pam_module_argument_result
  tags:
  - CCE-85573-4
  - DISA-STIG-SLES-15-020260
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Add "minlen" argument to "pam_cracklib.so" module
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+requisite\s+pam_cracklib.so)((\s+\S+)*\s*(\\)*$)
    line: \g<1> minlen={{ var_password_pam_minlen }}\g<2>
    backrefs: true
  when: check_pam_module_argument_result is not skipped and '"minlen" not in check_pam_module_argument_result.stdout'
  tags:
  - CCE-85573-4
  - DISA-STIG-SLES-15-020260
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - cracklib_accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict


declare -a VALUES=()
declare -a VALUE_NAMES=()
declare -a ARGS=()
declare -a NEW_ARGS=()

var_password_pam_minlen='14'

VALUES+=("$var_password_pam_minlen")
VALUE_NAMES+=("minlen")
ARGS+=("")
NEW_ARGS+=("")

for idx in "${!VALUES[@]}"
do
    if [ -e "/etc/pam.d/common-password" ] ; then
        valueRegex="${VALUES[$idx]}" defaultValue="${VALUES[$idx]}"
        # non-empty values need to be preceded by an equals sign
        [ -n "${valueRegex}" ] && valueRegex="=${valueRegex}"
        # add an equals sign to non-empty values
        [ -n "${defaultValue}" ] && defaultValue="=${defaultValue}"

        # fix the value for 'option' if one exists but does not match 'valueRegex'
        if grep -q -P "^\\s*password\\s+requisite\\s+pam_cracklib.so(\\s.+)?\\s+${VALUE_NAMES[$idx]}(?"'!'"${valueRegex}(\\s|\$))" < "/etc/pam.d/common-password" ; then
            sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_cracklib.so(\\s.+)?\\s)${VALUE_NAMES[$idx]}=[^[:space:]]*/\\1${VALUE_NAMES[$idx]}${defaultValue}/" "/etc/pam.d/common-password"

        # add 'option=default' if option is not set
        elif grep -q -E "^\\s*password\\s+requisite\\s+pam_cracklib.so" < "/etc/pam.d/common-password" &&
                grep    -E "^\\s*password\\s+requisite\\s+pam_cracklib.so" < "/etc/pam.d/common-password" | grep -q -E -v "\\s${VALUE_NAMES[$idx]}(=|\\s|\$)" ; then

            sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_cracklib.so[^\\n]*)/\\1 ${VALUE_NAMES[$idx]}${defaultValue}/" "/etc/pam.d/common-password"
        # add a new entry if none exists
        elif ! grep -q -P "^\\s*password\\s+requisite\\s+pam_cracklib.so(\\s.+)?\\s+${VALUE_NAMES[$idx]}${valueRegex}(\\s|\$)" < "/etc/pam.d/common-password" ; then
            echo "password requisite pam_cracklib.so ${VALUE_NAMES[$idx]}${defaultValue}" >> "/etc/pam.d/common-password"
        fi
    else
        echo "/etc/pam.d/common-password doesn't exist" >&2
    fi
done

for idx in "${!ARGS[@]}"
do
    if ! grep -q -P "^\s*password\s+requisite\s+pam_cracklib.so.*\s+${ARGS[$idx]}\s*$" /etc/pam.d/common-password ; then
        sed --follow-symlinks -i -E -e "s/^\\s*password\\s+requisite\\s+pam_cracklib.so.*\$/& ${NEW_ARGS[$idx]}/" /etc/pam.d/common-password
    fi
done

Rule Set Password Strength Minimum Special Characters [ref]

The pam_cracklib module's ocredit= parameter controls requirements for usage of special (or ``other'') characters in a password. When set to a negative number, any password will be required to contain that many special characters. When set to a positive number, pam_cracklib will grant +1 additional length credit for each special character. Make sure the ocredit parameter for the pam_cracklib module is set to less than or equal to -1. For example,

ocredit=-1

Rationale:

Requiring a minimum number of special characters makes password guessing attacks more difficult by ensuring a larger search space.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_cracklib_accounts_password_pam_ocredit

Identifiers:

CCE-85574-2

References:

disa	CCI-001619
nist	IA-5(a), IA-5(v)
pcidss	Req-8.2.3
os-srg	SRG-OS-000266-GPOS-00101
stigid	SLES-15-020270
cis	5.3.1
anssi	R31
stigref	SV-234896r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value var_password_pam_ocredit # promote to variable
  set_fact:
    var_password_pam_ocredit: !!str -1
  tags:
    - always

- name: Set control_flag fact
  set_fact:
    control_flag: requisite
  tags:
  - CCE-85574-2
  - DISA-STIG-SLES-15-020270
  - NIST-800-53-IA-5(a)
  - NIST-800-53-IA-5(v)
  - PCI-DSS-Req-8.2.3
  - cracklib_accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check to see if 'pam_cracklib.so' module is configured in '/etc/pam.d/common-password'
  shell: |
    set -o pipefail
    grep -E '^\s*password\s+\S+\s+pam_cracklib.so' /etc/pam.d/common-password || true
  register: check_pam_module_result
  tags:
  - CCE-85574-2
  - DISA-STIG-SLES-15-020270
  - NIST-800-53-IA-5(a)
  - NIST-800-53-IA-5(v)
  - PCI-DSS-Req-8.2.3
  - cracklib_accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure 'pam_cracklib.so' module in '/etc/pam.d/common-password'
  lineinfile:
    path: /etc/pam.d/common-password
    line: password requisite pam_cracklib.so
    state: present
  when: check_pam_module_result.stdout is defined and '"pam_cracklib.so" not in check_pam_module_result.stdout'
  tags:
  - CCE-85574-2
  - DISA-STIG-SLES-15-020270
  - NIST-800-53-IA-5(a)
  - NIST-800-53-IA-5(v)
  - PCI-DSS-Req-8.2.3
  - cracklib_accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure 'pam_cracklib.so' module has conforming control flag
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+)\S+(\s+pam_cracklib.so\s+.*)
    line: \g<1>requisite\g<2>
    backrefs: true
  when: control_flag|length
  tags:
  - CCE-85574-2
  - DISA-STIG-SLES-15-020270
  - NIST-800-53-IA-5(a)
  - NIST-800-53-IA-5(v)
  - PCI-DSS-Req-8.2.3
  - cracklib_accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure "pam_cracklib.so" module has argument "ocredit={{ var_password_pam_ocredit
    }}"
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+requisite\s+pam_cracklib.so(?:\s+\S+)*\s+ocredit=)(?:\S+)((\s+\S+)*\s*\\*\s*)$
    line: \g<1>{{ var_password_pam_ocredit }}\g<2>
    backrefs: true
  tags:
  - CCE-85574-2
  - DISA-STIG-SLES-15-020270
  - NIST-800-53-IA-5(a)
  - NIST-800-53-IA-5(v)
  - PCI-DSS-Req-8.2.3
  - cracklib_accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check the presence of "ocredit" argument in "pam_cracklib.so" module
  shell: |
    set -o pipefail
    grep -E '^\s*password\s+requisite\s+pam_cracklib.so.*\s+ocredit(=|\s|\s*$)' /etc/pam.d/common-password || true
  register: check_pam_module_argument_result
  tags:
  - CCE-85574-2
  - DISA-STIG-SLES-15-020270
  - NIST-800-53-IA-5(a)
  - NIST-800-53-IA-5(v)
  - PCI-DSS-Req-8.2.3
  - cracklib_accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Add "ocredit" argument to "pam_cracklib.so" module
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+requisite\s+pam_cracklib.so)((\s+\S+)*\s*(\\)*$)
    line: \g<1> ocredit={{ var_password_pam_ocredit }}\g<2>
    backrefs: true
  when: check_pam_module_argument_result is not skipped and '"ocredit" not in check_pam_module_argument_result.stdout'
  tags:
  - CCE-85574-2
  - DISA-STIG-SLES-15-020270
  - NIST-800-53-IA-5(a)
  - NIST-800-53-IA-5(v)
  - PCI-DSS-Req-8.2.3
  - cracklib_accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict


declare -a VALUES=()
declare -a VALUE_NAMES=()
declare -a ARGS=()
declare -a NEW_ARGS=()

var_password_pam_ocredit='-1'

VALUES+=("$var_password_pam_ocredit")
VALUE_NAMES+=("ocredit")
ARGS+=("")
NEW_ARGS+=("")

for idx in "${!VALUES[@]}"
do
    if [ -e "/etc/pam.d/common-password" ] ; then
        valueRegex="${VALUES[$idx]}" defaultValue="${VALUES[$idx]}"
        # non-empty values need to be preceded by an equals sign
        [ -n "${valueRegex}" ] && valueRegex="=${valueRegex}"
        # add an equals sign to non-empty values
        [ -n "${defaultValue}" ] && defaultValue="=${defaultValue}"

        # fix the value for 'option' if one exists but does not match 'valueRegex'
        if grep -q -P "^\\s*password\\s+requisite\\s+pam_cracklib.so(\\s.+)?\\s+${VALUE_NAMES[$idx]}(?"'!'"${valueRegex}(\\s|\$))" < "/etc/pam.d/common-password" ; then
            sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_cracklib.so(\\s.+)?\\s)${VALUE_NAMES[$idx]}=[^[:space:]]*/\\1${VALUE_NAMES[$idx]}${defaultValue}/" "/etc/pam.d/common-password"

        # add 'option=default' if option is not set
        elif grep -q -E "^\\s*password\\s+requisite\\s+pam_cracklib.so" < "/etc/pam.d/common-password" &&
                grep    -E "^\\s*password\\s+requisite\\s+pam_cracklib.so" < "/etc/pam.d/common-password" | grep -q -E -v "\\s${VALUE_NAMES[$idx]}(=|\\s|\$)" ; then

            sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_cracklib.so[^\\n]*)/\\1 ${VALUE_NAMES[$idx]}${defaultValue}/" "/etc/pam.d/common-password"
        # add a new entry if none exists
        elif ! grep -q -P "^\\s*password\\s+requisite\\s+pam_cracklib.so(\\s.+)?\\s+${VALUE_NAMES[$idx]}${valueRegex}(\\s|\$)" < "/etc/pam.d/common-password" ; then
            echo "password requisite pam_cracklib.so ${VALUE_NAMES[$idx]}${defaultValue}" >> "/etc/pam.d/common-password"
        fi
    else
        echo "/etc/pam.d/common-password doesn't exist" >&2
    fi
done

for idx in "${!ARGS[@]}"
do
    if ! grep -q -P "^\s*password\s+requisite\s+pam_cracklib.so.*\s+${ARGS[$idx]}\s*$" /etc/pam.d/common-password ; then
        sed --follow-symlinks -i -E -e "s/^\\s*password\\s+requisite\\s+pam_cracklib.so.*\$/& ${NEW_ARGS[$idx]}/" /etc/pam.d/common-password
    fi
done

Rule Set Password Retry Limit [ref]

The pam_cracklib module's retry parameter controls the maximum number of times to prompt the user for the password before returning with error. Make sure it is configured with a value that is no more than 3. For example, retry=1.

Rationale:

To reduce opportunities for successful guesses and brute-force attacks.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_cracklib_accounts_password_pam_retry

Identifiers:

CCE-85575-9

References:

disa	CCI-000366
pcidss	Req-8.1.6, Req-8.1.7
os-srg	SRG-OS-000480-GPOS-00225
stigid	SLES-15-020290
cis	5.3.1
pcidss4	8.3.4
stigref	SV-234897r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value var_password_pam_retry # promote to variable
  set_fact:
    var_password_pam_retry: !!str 3
  tags:
    - always

- name: Set control_flag fact
  set_fact:
    control_flag: requisite
  tags:
  - CCE-85575-9
  - DISA-STIG-SLES-15-020290
  - PCI-DSS-Req-8.1.6
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - cracklib_accounts_password_pam_retry
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check to see if 'pam_cracklib.so' module is configured in '/etc/pam.d/common-password'
  shell: |
    set -o pipefail
    grep -E '^\s*password\s+\S+\s+pam_cracklib.so' /etc/pam.d/common-password || true
  register: check_pam_module_result
  tags:
  - CCE-85575-9
  - DISA-STIG-SLES-15-020290
  - PCI-DSS-Req-8.1.6
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - cracklib_accounts_password_pam_retry
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure 'pam_cracklib.so' module in '/etc/pam.d/common-password'
  lineinfile:
    path: /etc/pam.d/common-password
    line: password requisite pam_cracklib.so
    state: present
  when: check_pam_module_result.stdout is defined and '"pam_cracklib.so" not in check_pam_module_result.stdout'
  tags:
  - CCE-85575-9
  - DISA-STIG-SLES-15-020290
  - PCI-DSS-Req-8.1.6
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - cracklib_accounts_password_pam_retry
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure 'pam_cracklib.so' module has conforming control flag
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+)\S+(\s+pam_cracklib.so\s+.*)
    line: \g<1>requisite\g<2>
    backrefs: true
  when: control_flag|length
  tags:
  - CCE-85575-9
  - DISA-STIG-SLES-15-020290
  - PCI-DSS-Req-8.1.6
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - cracklib_accounts_password_pam_retry
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure "pam_cracklib.so" module has argument "retry={{ var_password_pam_retry
    }}"
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+requisite\s+pam_cracklib.so(?:\s+\S+)*\s+retry=)(?:\S+)((\s+\S+)*\s*\\*\s*)$
    line: \g<1>{{ var_password_pam_retry }}\g<2>
    backrefs: true
  tags:
  - CCE-85575-9
  - DISA-STIG-SLES-15-020290
  - PCI-DSS-Req-8.1.6
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - cracklib_accounts_password_pam_retry
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check the presence of "retry" argument in "pam_cracklib.so" module
  shell: |
    set -o pipefail
    grep -E '^\s*password\s+requisite\s+pam_cracklib.so.*\s+retry(=|\s|\s*$)' /etc/pam.d/common-password || true
  register: check_pam_module_argument_result
  tags:
  - CCE-85575-9
  - DISA-STIG-SLES-15-020290
  - PCI-DSS-Req-8.1.6
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - cracklib_accounts_password_pam_retry
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Add "retry" argument to "pam_cracklib.so" module
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+requisite\s+pam_cracklib.so)((\s+\S+)*\s*(\\)*$)
    line: \g<1> retry={{ var_password_pam_retry }}\g<2>
    backrefs: true
  when: check_pam_module_argument_result is not skipped and '"retry" not in check_pam_module_argument_result.stdout'
  tags:
  - CCE-85575-9
  - DISA-STIG-SLES-15-020290
  - PCI-DSS-Req-8.1.6
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - cracklib_accounts_password_pam_retry
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict


declare -a VALUES=()
declare -a VALUE_NAMES=()
declare -a ARGS=()
declare -a NEW_ARGS=()

var_password_pam_retry='3'

VALUES+=("$var_password_pam_retry")
VALUE_NAMES+=("retry")
ARGS+=("")
NEW_ARGS+=("")

for idx in "${!VALUES[@]}"
do
    if [ -e "/etc/pam.d/common-password" ] ; then
        valueRegex="${VALUES[$idx]}" defaultValue="${VALUES[$idx]}"
        # non-empty values need to be preceded by an equals sign
        [ -n "${valueRegex}" ] && valueRegex="=${valueRegex}"
        # add an equals sign to non-empty values
        [ -n "${defaultValue}" ] && defaultValue="=${defaultValue}"

        # fix the value for 'option' if one exists but does not match 'valueRegex'
        if grep -q -P "^\\s*password\\s+requisite\\s+pam_cracklib.so(\\s.+)?\\s+${VALUE_NAMES[$idx]}(?"'!'"${valueRegex}(\\s|\$))" < "/etc/pam.d/common-password" ; then
            sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_cracklib.so(\\s.+)?\\s)${VALUE_NAMES[$idx]}=[^[:space:]]*/\\1${VALUE_NAMES[$idx]}${defaultValue}/" "/etc/pam.d/common-password"

        # add 'option=default' if option is not set
        elif grep -q -E "^\\s*password\\s+requisite\\s+pam_cracklib.so" < "/etc/pam.d/common-password" &&
                grep    -E "^\\s*password\\s+requisite\\s+pam_cracklib.so" < "/etc/pam.d/common-password" | grep -q -E -v "\\s${VALUE_NAMES[$idx]}(=|\\s|\$)" ; then

            sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_cracklib.so[^\\n]*)/\\1 ${VALUE_NAMES[$idx]}${defaultValue}/" "/etc/pam.d/common-password"
        # add a new entry if none exists
        elif ! grep -q -P "^\\s*password\\s+requisite\\s+pam_cracklib.so(\\s.+)?\\s+${VALUE_NAMES[$idx]}${valueRegex}(\\s|\$)" < "/etc/pam.d/common-password" ; then
            echo "password requisite pam_cracklib.so ${VALUE_NAMES[$idx]}${defaultValue}" >> "/etc/pam.d/common-password"
        fi
    else
        echo "/etc/pam.d/common-password doesn't exist" >&2
    fi
done

for idx in "${!ARGS[@]}"
do
    if ! grep -q -P "^\s*password\s+requisite\s+pam_cracklib.so.*\s+${ARGS[$idx]}\s*$" /etc/pam.d/common-password ; then
        sed --follow-symlinks -i -E -e "s/^\\s*password\\s+requisite\\s+pam_cracklib.so.*\$/& ${NEW_ARGS[$idx]}/" /etc/pam.d/common-password
    fi
done

Rule Set Password Strength Minimum Uppercase Characters [ref]

The pam_cracklib module's ucredit= parameter controls requirements for usage of uppercase letters in a password. When set to a negative number, any password will be required to contain that many uppercase characters. When set to a positive number, pam_cracklib will grant +1 additional length credit for each uppercase character. Add ucredit=-1 after pam_cracklib.so to require use of an upper case character in passwords.

Rationale:

Requiring a minimum number of uppercase characters makes password guessing attacks more difficult by ensuring a larger search space.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_cracklib_accounts_password_pam_ucredit

Identifiers:

CCE-85675-7

References:

disa	CCI-000192
nist	IA-5(1)(a), IA-5(1).1(v)
pcidss	Req-8.2.3
os-srg	SRG-OS-000069-GPOS-00037
stigid	SLES-15-020130
cis	5.3.1
anssi	R31
stigref	SV-234882r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value var_password_pam_ucredit # promote to variable
  set_fact:
    var_password_pam_ucredit: !!str -1
  tags:
    - always

- name: Set control_flag fact
  set_fact:
    control_flag: requisite
  tags:
  - CCE-85675-7
  - DISA-STIG-SLES-15-020130
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(1).1(v)
  - PCI-DSS-Req-8.2.3
  - cracklib_accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check to see if 'pam_cracklib.so' module is configured in '/etc/pam.d/common-password'
  shell: |
    set -o pipefail
    grep -E '^\s*password\s+\S+\s+pam_cracklib.so' /etc/pam.d/common-password || true
  register: check_pam_module_result
  tags:
  - CCE-85675-7
  - DISA-STIG-SLES-15-020130
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(1).1(v)
  - PCI-DSS-Req-8.2.3
  - cracklib_accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure 'pam_cracklib.so' module in '/etc/pam.d/common-password'
  lineinfile:
    path: /etc/pam.d/common-password
    line: password requisite pam_cracklib.so
    state: present
  when: check_pam_module_result.stdout is defined and '"pam_cracklib.so" not in check_pam_module_result.stdout'
  tags:
  - CCE-85675-7
  - DISA-STIG-SLES-15-020130
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(1).1(v)
  - PCI-DSS-Req-8.2.3
  - cracklib_accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure 'pam_cracklib.so' module has conforming control flag
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+)\S+(\s+pam_cracklib.so\s+.*)
    line: \g<1>requisite\g<2>
    backrefs: true
  when: control_flag|length
  tags:
  - CCE-85675-7
  - DISA-STIG-SLES-15-020130
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(1).1(v)
  - PCI-DSS-Req-8.2.3
  - cracklib_accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure "pam_cracklib.so" module has argument "ucredit={{ var_password_pam_ucredit
    }}"
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+requisite\s+pam_cracklib.so(?:\s+\S+)*\s+ucredit=)(?:\S+)((\s+\S+)*\s*\\*\s*)$
    line: \g<1>{{ var_password_pam_ucredit }}\g<2>
    backrefs: true
  tags:
  - CCE-85675-7
  - DISA-STIG-SLES-15-020130
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(1).1(v)
  - PCI-DSS-Req-8.2.3
  - cracklib_accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check the presence of "ucredit" argument in "pam_cracklib.so" module
  shell: |
    set -o pipefail
    grep -E '^\s*password\s+requisite\s+pam_cracklib.so.*\s+ucredit(=|\s|\s*$)' /etc/pam.d/common-password || true
  register: check_pam_module_argument_result
  tags:
  - CCE-85675-7
  - DISA-STIG-SLES-15-020130
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(1).1(v)
  - PCI-DSS-Req-8.2.3
  - cracklib_accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Add "ucredit" argument to "pam_cracklib.so" module
  lineinfile:
    path: /etc/pam.d/common-password
    regexp: ^(\s*password\s+requisite\s+pam_cracklib.so)((\s+\S+)*\s*(\\)*$)
    line: \g<1> ucredit={{ var_password_pam_ucredit }}\g<2>
    backrefs: true
  when: check_pam_module_argument_result is not skipped and '"ucredit" not in check_pam_module_argument_result.stdout'
  tags:
  - CCE-85675-7
  - DISA-STIG-SLES-15-020130
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(1).1(v)
  - PCI-DSS-Req-8.2.3
  - cracklib_accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict


declare -a VALUES=()
declare -a VALUE_NAMES=()
declare -a ARGS=()
declare -a NEW_ARGS=()

var_password_pam_ucredit='-1'

VALUES+=("$var_password_pam_ucredit")
VALUE_NAMES+=("ucredit")
ARGS+=("")
NEW_ARGS+=("")

for idx in "${!VALUES[@]}"
do
    if [ -e "/etc/pam.d/common-password" ] ; then
        valueRegex="${VALUES[$idx]}" defaultValue="${VALUES[$idx]}"
        # non-empty values need to be preceded by an equals sign
        [ -n "${valueRegex}" ] && valueRegex="=${valueRegex}"
        # add an equals sign to non-empty values
        [ -n "${defaultValue}" ] && defaultValue="=${defaultValue}"

        # fix the value for 'option' if one exists but does not match 'valueRegex'
        if grep -q -P "^\\s*password\\s+requisite\\s+pam_cracklib.so(\\s.+)?\\s+${VALUE_NAMES[$idx]}(?"'!'"${valueRegex}(\\s|\$))" < "/etc/pam.d/common-password" ; then
            sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_cracklib.so(\\s.+)?\\s)${VALUE_NAMES[$idx]}=[^[:space:]]*/\\1${VALUE_NAMES[$idx]}${defaultValue}/" "/etc/pam.d/common-password"

        # add 'option=default' if option is not set
        elif grep -q -E "^\\s*password\\s+requisite\\s+pam_cracklib.so" < "/etc/pam.d/common-password" &&
                grep    -E "^\\s*password\\s+requisite\\s+pam_cracklib.so" < "/etc/pam.d/common-password" | grep -q -E -v "\\s${VALUE_NAMES[$idx]}(=|\\s|\$)" ; then

            sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_cracklib.so[^\\n]*)/\\1 ${VALUE_NAMES[$idx]}${defaultValue}/" "/etc/pam.d/common-password"
        # add a new entry if none exists
        elif ! grep -q -P "^\\s*password\\s+requisite\\s+pam_cracklib.so(\\s.+)?\\s+${VALUE_NAMES[$idx]}${valueRegex}(\\s|\$)" < "/etc/pam.d/common-password" ; then
            echo "password requisite pam_cracklib.so ${VALUE_NAMES[$idx]}${defaultValue}" >> "/etc/pam.d/common-password"
        fi
    else
        echo "/etc/pam.d/common-password doesn't exist" >&2
    fi
done

for idx in "${!ARGS[@]}"
do
    if ! grep -q -P "^\s*password\s+requisite\s+pam_cracklib.so.*\s+${ARGS[$idx]}\s*$" /etc/pam.d/common-password ; then
        sed --follow-symlinks -i -E -e "s/^\\s*password\\s+requisite\\s+pam_cracklib.so.*\$/& ${NEW_ARGS[$idx]}/" /etc/pam.d/common-password
    fi
done

Group Set Password Hashing Algorithm Group contains 1 rule

[ref] The system's default algorithm for storing password hashes in /etc/shadow is SHA-512. This can be configured in several locations.

Rule Set Password Hashing Algorithm in /etc/login.defs [ref]

In /etc/login.defs, add or correct the following line to ensure the system will use SHA512 as the hashing algorithm:

ENCRYPT_METHOD SHA512

Rationale:

Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kept in plain text.

Using a stronger hashing algorithm makes password cracking attacks more difficult.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_logindefs

Identifiers:

CCE-83279-0

References:

cis-csc	1, 12, 15, 16, 5
cjis	5.6.2.2
cobit5	DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui	3.13.11
disa	CCI-000196
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism	0418, 1055, 1402
iso27001-2013	A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nist	IA-5(c), IA-5(1)(c), CM-6(a)
nist-csf	PR.AC-1, PR.AC-6, PR.AC-7
pcidss	Req-8.2.1
os-srg	SRG-OS-000073-GPOS-00041
stigid	SLES-15-010260
cis	5.4.1.1
pcidss4	8.3.2
stigref	SV-234825r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83279-0
  - CJIS-5.6.2.2
  - DISA-STIG-SLES-15-010260
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_logindefs
- name: XCCDF Value var_password_hashing_algorithm # promote to variable
  set_fact:
    var_password_hashing_algorithm: !!str SHA512
  tags:
    - always

- name: Set Password Hashing Algorithm in /etc/login.defs
  lineinfile:
    dest: /etc/login.defs
    regexp: ^#?ENCRYPT_METHOD
    line: ENCRYPT_METHOD {{ var_password_hashing_algorithm }}
    state: present
    create: true
  when: '"shadow" in ansible_facts.packages'
  tags:
  - CCE-83279-0
  - CJIS-5.6.2.2
  - DISA-STIG-SLES-15-010260
  - NIST-800-171-3.13.11
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.1
  - PCI-DSSv4-8.3.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_password_hashing_algorithm_logindefs

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q shadow; then

var_password_hashing_algorithm='SHA512'

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ENCRYPT_METHOD")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$var_password_hashing_algorithm"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ENCRYPT_METHOD\\>" "/etc/login.defs"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^ENCRYPT_METHOD\\>.*/$escaped_formatted_output/gi" "/etc/login.defs"
else
    if [[ -s "/etc/login.defs" ]] && [[ -n "$(tail -c 1 -- "/etc/login.defs" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/login.defs"
    fi
    cce="CCE-83279-0"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/login.defs" >> "/etc/login.defs"
    printf '%s\n' "$formatted_output" >> "/etc/login.defs"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Protect Physical Console Access Group contains 2 rules

[ref] It is impossible to fully protect a system from an attacker with physical access, so securing the space in which the system is located should be considered a necessary step. However, there are some steps which, if taken, make it more difficult for an attacker to quickly or undetectably modify a system from its console.

Rule Require Authentication for Emergency Systemd Target [ref]

Emergency mode is intended as a system recovery method, providing a single user root access to the system during a failed boot sequence.

By default, Emergency mode is protected by requiring a password and is set in /usr/lib/systemd/system/emergency.service.

Rationale:

This prevents attackers with physical access from trivially bypassing security on the machine and gaining root access. Such accesses are further prevented by configuring the bootloader password.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_require_emergency_target_auth

Identifiers:

CCE-91347-5

References:

cis-csc	1, 11, 12, 14, 15, 16, 18, 3, 5
cobit5	DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10
cui	3.1.1, 3.4.5
disa	CCI-000213
hipaa	164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7
ism	0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013	A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nist	IA-2, AC-3, CM-6(a)
nist-csf	PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3
ospp	FIA_UAU.1
os-srg	SRG-OS-000080-GPOS-00048
cis	1.5.3

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Require emergency mode password
  ansible.builtin.blockinfile:
    create: true
    dest: /etc/systemd/system/emergency.service.d/10-oscap.conf
    block: |-
      [Service]
      ExecStart=-/usr/lib/systemd/systemd-sulogin-shell emergency
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91347-5
  - NIST-800-171-3.1.1
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - require_emergency_target_auth
  - restrict_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

service_dropin_cfg_dir="/etc/systemd/system/emergency.service.d"
service_dropin_file="${service_dropin_cfg_dir}/10-oscap.conf"


sulogin="/usr/lib/systemd/systemd-sulogin-shell emergency"


mkdir -p "${service_dropin_cfg_dir}"
echo "[Service]" >> "${service_dropin_file}"
echo "ExecStart=-$sulogin" >> "${service_dropin_file}"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Require Authentication for Single User Mode [ref]

Single-user mode is intended as a system recovery method, providing a single user root access to the system by providing a boot option at startup.

By default, single-user mode is protected by requiring a password and is set in /usr/lib/systemd/system/rescue.service.

Rationale:

This prevents attackers with physical access from trivially bypassing security on the machine and gaining root access. Such accesses are further prevented by configuring the bootloader password.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_require_singleuser_auth

Identifiers:

CCE-91428-3

References:

cis-csc	1, 11, 12, 14, 15, 16, 18, 3, 5
cobit5	DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10
cui	3.1.1, 3.4.5
disa	CCI-000213
hipaa	164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7
ism	0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013	A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3
nist	IA-2, AC-3, CM-6(a)
nist-csf	PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3
ospp	FIA_UAU.1
os-srg	SRG-OS-000080-GPOS-00048
cis	1.5.3

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Require single user mode password
  lineinfile:
    create: true
    dest: /usr/lib/systemd/system/rescue.service
    regexp: ^#?ExecStart=
    line: ExecStart=-/usr/lib/systemd/systemd-sulogin-shell rescue
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91428-3
  - NIST-800-171-3.1.1
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - require_singleuser_auth
  - restrict_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

service_file="/usr/lib/systemd/system/rescue.service"

sulogin="/usr/lib/systemd/systemd-sulogin-shell rescue"

if grep "^ExecStart=.*" "$service_file" ; then
    sed -i "s%^ExecStart=.*%ExecStart=-$sulogin%" "$service_file"
else
    echo "ExecStart=-$sulogin" >> "$service_file"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Protect Accounts by Restricting Password-Based Login Group contains 4 groups and 28 rules

[ref] Conventionally, Unix shell accounts are accessed by providing a username and password to a login program, which tests these values for correctness using the /etc/passwd and /etc/shadow files. Password-based login is vulnerable to guessing of weak passwords, and to sniffing and man-in-the-middle attacks against passwords entered over a network or at an insecure console. Therefore, mechanisms for accessing accounts by entering usernames and passwords should be restricted to those which are operationally necessary.

Group Set Account Expiration Parameters Group contains 3 rules

[ref] Accounts can be configured to be automatically disabled after a certain time period, meaning that they will require administrator interaction to become usable again. Expiration of accounts after inactivity can be set for all accounts by default and also on a per-account basis, such as for accounts that are known to be temporary. To configure automatic expiration of an account following the expiration of its password (that is, after the password has expired and not been changed), run the following command, substituting NUM_DAYS and USER appropriately:

$ sudo chage -I NUM_DAYS USER

Accounts, such as temporary accounts, can also be configured to expire on an explicitly-set date with the -E option. The file /etc/default/useradd controls default settings for all newly-created accounts created with the system's normal command line utilities.

Warning: This will only apply to newly created accounts

Rule Set Account Expiration Following Inactivity [ref]

To specify the number of days after a password expires (which signifies inactivity) until an account is permanently disabled, add or correct the following line in /etc/default/useradd:

INACTIVE=30

If a password is currently on the verge of expiration, then 30 day(s) remain(s) until the account is automatically disabled. However, if the password will not expire for another 60 days, then 60 days plus 30 day(s) could elapse until the account would be automatically disabled. See the useradd man page for more information.

Rationale:

Inactive identifiers pose a risk to systems and applications because attackers may exploit an inactive identifier and potentially obtain undetected access to the system. Disabling inactive accounts ensures that accounts which may not have been responsibly removed are not available to attackers who may have compromised their credentials. Owners of inactive accounts will not notice if unauthorized access to their user account has been obtained.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_account_disable_post_pw_expiration

Identifiers:

CCE-85558-5

References:

cis-csc	1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8
cjis	5.6.2.1.1
cobit5	DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui	3.5.6
disa	CCI-000017, CCI-000795
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2
iso27001-2013	A.12.4.1, A.12.4.3, A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nerc-cip	CIP-004-6 R2.2.2, CIP-004-6 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3
nist	IA-4(e), AC-2(3), CM-6(a)
nist-csf	DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7
pcidss	Req-8.1.4
os-srg	SRG-OS-000118-GPOS-00060
stigid	SLES-15-020050
cis	5.4.1.5
pcidss4	8.2.6
stigref	SV-234871r928531_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-85558-5
  - CJIS-5.6.2.1.1
  - DISA-STIG-SLES-15-020050
  - NIST-800-171-3.5.6
  - NIST-800-53-AC-2(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-4(e)
  - PCI-DSS-Req-8.1.4
  - PCI-DSSv4-8.2.6
  - account_disable_post_pw_expiration
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_account_disable_post_pw_expiration # promote to variable
  set_fact:
    var_account_disable_post_pw_expiration: !!str 30
  tags:
    - always

- name: Set Account Expiration Following Inactivity
  lineinfile:
    create: true
    dest: /etc/default/useradd
    regexp: ^INACTIVE
    line: INACTIVE={{ var_account_disable_post_pw_expiration }}
  when: '"shadow" in ansible_facts.packages'
  tags:
  - CCE-85558-5
  - CJIS-5.6.2.1.1
  - DISA-STIG-SLES-15-020050
  - NIST-800-171-3.5.6
  - NIST-800-53-AC-2(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-4(e)
  - PCI-DSS-Req-8.1.4
  - PCI-DSSv4-8.2.6
  - account_disable_post_pw_expiration
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q shadow; then

var_account_disable_post_pw_expiration='30'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^INACTIVE")

# shellcheck disable=SC2059
printf -v formatted_output "%s=%s" "$stripped_key" "$var_account_disable_post_pw_expiration"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^INACTIVE\\>" "/etc/default/useradd"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^INACTIVE\\>.*/$escaped_formatted_output/gi" "/etc/default/useradd"
else
    if [[ -s "/etc/default/useradd" ]] && [[ -n "$(tail -c 1 -- "/etc/default/useradd" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/default/useradd"
    fi
    cce="CCE-85558-5"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/default/useradd" >> "/etc/default/useradd"
    printf '%s\n' "$formatted_output" >> "/etc/default/useradd"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure All Accounts on the System Have Unique Names [ref]

Ensure accounts on the system have unique names. To ensure all accounts have unique names, run the following command:

$ sudo getent passwd | awk -F: '{ print $1}' | uniq -d

If a username is returned, change or delete the username.

Rationale:

Unique usernames allow for accountability on the system.

Severity:

medium

Rule ID:

xccdf_org.ssgproject.content_rule_account_unique_name

Identifiers:

CCE-85845-6

References:

cjis	5.5.2
disa	CCI-000770, CCI-000804
pcidss	Req-8.1.1
cis	6.2.16
pcidss4	8.2.1

Rule Ensure shadow Group is Empty [ref]

The shadow group allows system programs which require access the ability to read the /etc/shadow file. No users should be assigned to the shadow group.

Warning: This rule remediation will ensure the group membership is empty in /etc/group. To avoid any disruption the remediation won't change the primary group of users in /etc/passwd if any user has the shadow GID as primary group.

Rationale:

Any users assigned to the shadow group would be granted read access to the /etc/shadow file. If attackers can gain read access to the /etc/shadow file, they can easily run a password cracking program against the hashed passwords to break them. Other security information that is stored in the /etc/shadow file (such as expiration) could also be useful to subvert additional user accounts.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_ensure_shadow_group_empty

Identifiers:

CCE-91344-2

References:

pcidss	Req-8.2.1
cis	6.2.18
pcidss4	8.3.2

Remediation Shell script ⇲


sed -ri 's/(^shadow:[^:]*:[^:]*:)([^:]+$)/\1/' /etc/group

Group Set Password Expiration Parameters Group contains 7 rules

[ref] The file /etc/login.defs controls several password-related settings. Programs such as passwd, su, and login consult /etc/login.defs to determine behavior with regard to password aging, expiration warnings, and length. See the man page login.defs(5) for more information.

Users should be forced to change their passwords, in order to decrease the utility of compromised passwords. However, the need to change passwords often should be balanced against the risk that users will reuse or write down passwords if forced to change them too often. Forcing password changes every 90-360 days, depending on the environment, is recommended. Set the appropriate value as PASS_MAX_DAYS and apply it to existing accounts with the -M flag.

The PASS_MIN_DAYS (-m) setting prevents password changes for 7 days after the first change, to discourage password cycling. If you use this setting, train users to contact an administrator for an emergency password change in case a new password becomes compromised. The PASS_WARN_AGE (-W) setting gives users 7 days of warnings at login time that their passwords are about to expire.

For example, for each existing human user USER, expiration parameters could be adjusted to a 180 day maximum password age, 7 day minimum password age, and 7 day warning period with the following command:

$ sudo chage -M 180 -m 7 -W 7 USER

Rule Set Password Maximum Age [ref]

To specify password maximum age for new accounts, edit the file /etc/login.defs and add or correct the following line:

PASS_MAX_DAYS 365

A value of 180 days is sufficient for many environments. The DoD requirement is 60. The profile requirement is 365.

Rationale:

Any password, no matter how complex, can eventually be cracked. Therefore, passwords need to be changed periodically. If the operating system does not limit the lifetime of passwords and force users to change their passwords, there is the risk that the operating system passwords could be compromised.

Setting the password maximum age ensures users are required to periodically change their passwords. Requiring shorter password lifetimes increases the risk of users writing down the password in a convenient location subject to physical compromise.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_maximum_age_login_defs

Identifiers:

CCE-85570-0

References:

cis-csc	1, 12, 15, 16, 5
cjis	5.6.2.1
cobit5	DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui	3.5.6
disa	CCI-000199
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism	0418, 1055, 1402
iso27001-2013	A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nist	IA-5(f), IA-5(1)(d), CM-6(a)
nist-csf	PR.AC-1, PR.AC-6, PR.AC-7
pcidss	Req-8.2.4
os-srg	SRG-OS-000076-GPOS-00044
stigid	SLES-15-020220
cis	5.4.1.2
pcidss4	8.3.9
stigref	SV-234891r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-85570-0
  - CJIS-5.6.2.1
  - DISA-STIG-SLES-15-020220
  - NIST-800-171-3.5.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.4
  - PCI-DSSv4-8.3.9
  - accounts_maximum_age_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_maximum_age_login_defs # promote to variable
  set_fact:
    var_accounts_maximum_age_login_defs: !!str 365
  tags:
    - always

- name: Set Password Maximum Age
  lineinfile:
    create: true
    dest: /etc/login.defs
    regexp: ^#?PASS_MAX_DAYS
    line: PASS_MAX_DAYS {{ var_accounts_maximum_age_login_defs }}
  when: '"shadow" in ansible_facts.packages'
  tags:
  - CCE-85570-0
  - CJIS-5.6.2.1
  - DISA-STIG-SLES-15-020220
  - NIST-800-171-3.5.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.4
  - PCI-DSSv4-8.3.9
  - accounts_maximum_age_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q shadow; then

var_accounts_maximum_age_login_defs='365'

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^PASS_MAX_DAYS")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$var_accounts_maximum_age_login_defs"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^PASS_MAX_DAYS\\>" "/etc/login.defs"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^PASS_MAX_DAYS\\>.*/$escaped_formatted_output/gi" "/etc/login.defs"
else
    if [[ -s "/etc/login.defs" ]] && [[ -n "$(tail -c 1 -- "/etc/login.defs" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/login.defs"
    fi
    cce="CCE-85570-0"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/login.defs" >> "/etc/login.defs"
    printf '%s\n' "$formatted_output" >> "/etc/login.defs"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Set Password Minimum Age [ref]

To specify password minimum age for new accounts, edit the file /etc/login.defs and add or correct the following line:

PASS_MIN_DAYS 1

A value of 1 day is considered sufficient for many environments. The DoD requirement is 1. The profile requirement is 1.

Rationale:

Enforcing a minimum password lifetime helps to prevent repeated password changes to defeat the password reuse or history enforcement requirement. If users are allowed to immediately and continually change their password, then the password could be repeatedly changed in a short period of time to defeat the organization's policy regarding password reuse.

Setting the minimum password age protects against users cycling back to a favorite password after satisfying the password reuse requirement.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_minimum_age_login_defs

Identifiers:

CCE-85720-1

References:

cis-csc	1, 12, 15, 16, 5
cjis	5.6.2.1.1
cobit5	DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui	3.5.8
disa	CCI-000198
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism	0418, 1055, 1402
iso27001-2013	A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nist	IA-5(1)(d), IA-5(1).1(v)
nist-csf	PR.AC-1, PR.AC-6, PR.AC-7
os-srg	SRG-OS-000075-GPOS-00043
stigid	SLES-15-020200
cis	5.4.1.3
stigref	SV-234889r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-85720-1
  - CJIS-5.6.2.1.1
  - DISA-STIG-SLES-15-020200
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(1).1(v)
  - accounts_minimum_age_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_minimum_age_login_defs # promote to variable
  set_fact:
    var_accounts_minimum_age_login_defs: !!str 1
  tags:
    - always

- name: Set Password Minimum Age
  lineinfile:
    create: true
    dest: /etc/login.defs
    regexp: ^#?PASS_MIN_DAYS
    line: PASS_MIN_DAYS {{ var_accounts_minimum_age_login_defs }}
  when: '"shadow" in ansible_facts.packages'
  tags:
  - CCE-85720-1
  - CJIS-5.6.2.1.1
  - DISA-STIG-SLES-15-020200
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(1).1(v)
  - accounts_minimum_age_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q shadow; then

var_accounts_minimum_age_login_defs='1'

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^PASS_MIN_DAYS")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$var_accounts_minimum_age_login_defs"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^PASS_MIN_DAYS\\>" "/etc/login.defs"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^PASS_MIN_DAYS\\>.*/$escaped_formatted_output/gi" "/etc/login.defs"
else
    if [[ -s "/etc/login.defs" ]] && [[ -n "$(tail -c 1 -- "/etc/login.defs" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/login.defs"
    fi
    cce="CCE-85720-1"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/login.defs" >> "/etc/login.defs"
    printf '%s\n' "$formatted_output" >> "/etc/login.defs"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Set Existing Passwords Maximum Age [ref]

Configure non-compliant accounts to enforce a 365-day maximum password lifetime restriction by running the following command:

$ sudo chage -M 365
          USER

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_password_set_max_life_existing

Identifiers:

CCE-85571-8

References:

disa	CCI-000199
nist	IA-5(f), IA-5(1)(d), CM-6(a)
os-srg	SRG-OS-000076-GPOS-00044
stigid	SLES-15-020230
cis	5.4.1.2
pcidss4	8.3.9
stigref	SV-234892r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value var_accounts_maximum_age_login_defs # promote to variable
  set_fact:
    var_accounts_maximum_age_login_defs: !!str 365
  tags:
    - always

- name: Collect users with not correct maximum time period between password changes
  ansible.builtin.command:
    cmd: awk -F':' '(/^[^:]+:[^!*]/ && ($5 > {{ var_accounts_maximum_age_login_defs
      }} || $5 == "")) {print $1}' /etc/shadow
  register: user_names
  tags:
  - CCE-85571-8
  - DISA-STIG-SLES-15-020230
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - PCI-DSSv4-8.3.9
  - accounts_password_set_max_life_existing
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Change the maximum time period between password changes
  ansible.builtin.command:
    cmd: passwd -q -x {{ var_accounts_maximum_age_login_defs }} {{ item }}
  with_items: '{{ user_names.stdout_lines }}'
  when: user_names.stdout_lines | length > 0
  tags:
  - CCE-85571-8
  - DISA-STIG-SLES-15-020230
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - PCI-DSSv4-8.3.9
  - accounts_password_set_max_life_existing
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict


var_accounts_maximum_age_login_defs='365'


while IFS= read -r i; do
    
    passwd -q -x $var_accounts_maximum_age_login_defs $i

done <   <(awk -v var="$var_accounts_maximum_age_login_defs" -F: '(/^[^:]+:[^!*]/ && ($5 > var || $5 == "")) {print $1}' /etc/shadow)

Rule Set Existing Passwords Minimum Age [ref]

Configure non-compliant accounts to enforce a 24 hours/1 day minimum password lifetime by running the following command:

$ sudo chage -m 1 USER

Rationale:

Enforcing a minimum password lifetime helps to prevent repeated password changes to defeat the password reuse or history enforcement requirement. If users are allowed to immediately and continually change their password, the password could be repeatedly changed in a short period of time to defeat the organization's policy regarding password reuse.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_password_set_min_life_existing

Identifiers:

CCE-85710-2

References:

disa	CCI-000198
nist	IA-5(1).1(v)
os-srg	SRG-OS-000075-GPOS-00043
stigid	SLES-15-020210
cis	5.4.1.3
stigref	SV-234890r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value var_accounts_minimum_age_login_defs # promote to variable
  set_fact:
    var_accounts_minimum_age_login_defs: !!str 1
  tags:
    - always

- name: Collect users with not correct minimum time period between password changes
  command: |
    awk -F':' '(/^[^:]+:[^!*]/ && ($4 < {{ var_accounts_minimum_age_login_defs }} || $4 == "")) {print $1}' /etc/shadow
  register: user_names
  tags:
  - CCE-85710-2
  - DISA-STIG-SLES-15-020210
  - NIST-800-53-IA-5(1).1(v)
  - accounts_password_set_min_life_existing
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Change the minimum time period between password changes
  command: |
    passwd -q -n {{ var_accounts_minimum_age_login_defs }} {{ item }}
  with_items: '{{ user_names.stdout_lines }}'
  when: user_names.stdout_lines | length > 0
  tags:
  - CCE-85710-2
  - DISA-STIG-SLES-15-020210
  - NIST-800-53-IA-5(1).1(v)
  - accounts_password_set_min_life_existing
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict


var_accounts_minimum_age_login_defs='1'


while IFS= read -r i; do
    
    passwd -q -n $var_accounts_minimum_age_login_defs $i

done <   <(awk -v var="$var_accounts_minimum_age_login_defs" -F: '(/^[^:]+:[^!*]/ && ($4 < var || $4 == "")) {print $1}' /etc/shadow)

Rule Set Existing Passwords Warning Age [ref]

To configure how many days prior to password expiration that a warning will be issued to users, run the command:

$ sudo chage --warndays 7
          USER

The DoD requirement is 7, and CIS recommendation is no less than 7 days. This profile requirement is 7.

Rationale:

Providing an advance warning that a password will be expiring gives users time to think of a secure password. Users caught unaware may choose a simple password or write it down where it may be discovered.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_password_set_warn_age_existing

Identifiers:

CCE-92479-5

References:

disa	CCI-000198
nist	IA-5(1).1(v)
cis	5.4.1.4
pcidss4	8.3.9

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: XCCDF Value var_accounts_password_warn_age_login_defs # promote to variable
  set_fact:
    var_accounts_password_warn_age_login_defs: !!str 7
  tags:
    - always

- name: Set Existing Passwords Warning Age - Collect Users With Incorrect Number of
    Days of Warning Before Password Expires
  ansible.builtin.command:
    cmd: awk -F':' '(($6 < {{ var_accounts_password_warn_age_login_defs }} || $6 ==
      "") && $2 ~ /^\$/) {print $1}' /etc/shadow
  register: result_pass_warn_age_user_names
  changed_when: false
  tags:
  - CCE-92479-5
  - NIST-800-53-IA-5(1).1(v)
  - PCI-DSSv4-8.3.9
  - accounts_password_set_warn_age_existing
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Existing Passwords Warning Age - Ensure the Number of Days of Warning
    Before Password Expires
  ansible.builtin.command:
    cmd: chage --warndays {{ var_accounts_password_warn_age_login_defs }} {{ item
      }}
  with_items: '{{ result_pass_warn_age_user_names.stdout_lines }}'
  when: result_pass_warn_age_user_names is not skipped and result_pass_warn_age_user_names.stdout_lines
    | length > 0
  tags:
  - CCE-92479-5
  - NIST-800-53-IA-5(1).1(v)
  - PCI-DSSv4-8.3.9
  - accounts_password_set_warn_age_existing
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure


var_accounts_password_warn_age_login_defs='7'


while IFS= read -r i; do
    chage --warndays $var_accounts_password_warn_age_login_defs $i
done <   <(awk -v var="$var_accounts_password_warn_age_login_defs" -F: '(($6 < var || $6 == "") && $2 ~ /^\$/) {print $1}' /etc/shadow)

Rule Set Password Warning Age [ref]

To specify how many days prior to password expiration that a warning will be issued to users, edit the file /etc/login.defs and add or correct the following line:

PASS_WARN_AGE 7

The DoD requirement is 7. The profile requirement is 7.

Rationale:

Setting the password warning age enables users to make the change at a practical time.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_password_warn_age_login_defs

Identifiers:

CCE-91335-0

References:

cis-csc	1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8
cobit5	DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui	3.5.8
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2
ism	0418, 1055, 1402
iso27001-2013	A.12.4.1, A.12.4.3, A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nist	IA-5(f), IA-5(1)(d), CM-6(a)
nist-csf	DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7
pcidss	Req-8.2.4
cis	5.4.1.4
pcidss4	8.3.9

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91335-0
  - NIST-800-171-3.5.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.4
  - PCI-DSSv4-8.3.9
  - accounts_password_warn_age_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_password_warn_age_login_defs # promote to variable
  set_fact:
    var_accounts_password_warn_age_login_defs: !!str 7
  tags:
    - always

- name: Set Password Warning Age
  lineinfile:
    dest: /etc/login.defs
    regexp: ^PASS_WARN_AGE *[0-9]*
    state: present
    line: PASS_WARN_AGE        {{ var_accounts_password_warn_age_login_defs }}
    create: true
  when: '"shadow" in ansible_facts.packages'
  tags:
  - CCE-91335-0
  - NIST-800-171-3.5.8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.4
  - PCI-DSSv4-8.3.9
  - accounts_password_warn_age_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q shadow; then

var_accounts_password_warn_age_login_defs='7'

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^PASS_WARN_AGE")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$var_accounts_password_warn_age_login_defs"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^PASS_WARN_AGE\\>" "/etc/login.defs"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^PASS_WARN_AGE\\>.*/$escaped_formatted_output/gi" "/etc/login.defs"
else
    if [[ -s "/etc/login.defs" ]] && [[ -n "$(tail -c 1 -- "/etc/login.defs" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/login.defs"
    fi
    cce="CCE-91335-0"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/login.defs" >> "/etc/login.defs"
    printf '%s\n' "$formatted_output" >> "/etc/login.defs"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Set existing passwords a period of inactivity before they been locked [ref]

Configure user accounts that have been inactive for over a given period of time to be automatically disabled by running the following command:

$ sudo chage --inactive 30USER

Rationale:

Inactive accounts pose a threat to system security since the users are not logging in to notice failed login attempts or other anomalies.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_set_post_pw_existing

Identifiers:

CCE-92480-3

References:

cobit5	DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui	3.5.6
disa	CCI-000017, CCI-000795
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2
iso27001-2013	A.12.4.1, A.12.4.3, A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nerc-cip	CIP-004-6 R2.2.2, CIP-004-6 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3
nist	IA-4(e), AC-2(3), CM-6(a)
nist-csf	DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7
pcidss	Req-8.1.4
os-srg	SRG-OS-000118-GPOS-00060
cis	5.4.1.5
pcidss4	8.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value var_account_disable_post_pw_expiration # promote to variable
  set_fact:
    var_account_disable_post_pw_expiration: !!str 30
  tags:
    - always

- name: Collect users with not correct INACTIVE parameter set
  ansible.builtin.command:
    cmd: awk -F':' '(($7 > {{ var_account_disable_post_pw_expiration }} || $7 == "")
      && $2 ~ /^\$/) {print $1}' /etc/shadow
  register: user_names
  changed_when: false
  tags:
  - CCE-92480-3
  - NIST-800-171-3.5.6
  - NIST-800-53-AC-2(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-4(e)
  - PCI-DSS-Req-8.1.4
  - PCI-DSSv4-8.2.6
  - accounts_set_post_pw_existing
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Change the period of inactivity
  ansible.builtin.command:
    cmd: chage --inactive {{ var_account_disable_post_pw_expiration }} {{ item }}
  with_items: '{{ user_names.stdout_lines }}'
  when: user_names is not skipped and user_names.stdout_lines | length > 0
  tags:
  - CCE-92480-3
  - NIST-800-171-3.5.6
  - NIST-800-53-AC-2(3)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-4(e)
  - PCI-DSS-Req-8.1.4
  - PCI-DSSv4-8.2.6
  - accounts_set_post_pw_existing
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict


var_account_disable_post_pw_expiration='30'


while IFS= read -r i; do
    chage --inactive $var_account_disable_post_pw_expiration $i
done <   <(awk -v var="$var_account_disable_post_pw_expiration" -F: '(($7 > var || $7 == "") && $2 ~ /^\$/) {print $1}' /etc/shadow)

Group Verify Proper Storage and Existence of Password Hashes Group contains 8 rules

[ref] By default, password hashes for local accounts are stored in the second field (colon-separated) in /etc/shadow. This file should be readable only by processes running with root credentials, preventing users from casually accessing others' password hashes and attempting to crack them. However, it remains possible to misconfigure the system and store password hashes in world-readable files such as /etc/passwd, or to even store passwords themselves in plaintext on the system. Using system-provided tools for password change/creation should allow administrators to avoid such misconfiguration.

Rule Verify All Account Password Hashes are Shadowed [ref]

If any password hashes are stored in /etc/passwd (in the second field, instead of an x or *), the cause of this misconfiguration should be investigated. The account should have its password reset and the hash should be properly stored, or the account should be deleted entirely.

Rationale:

The hashes for all user account passwords should be stored in the file /etc/shadow and never in /etc/passwd, which is readable by all users.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_password_all_shadowed

Identifiers:

CCE-85846-4

References:

cis-csc	1, 12, 15, 16, 5
cjis	5.5.2
cobit5	DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui	3.5.10
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
ism	1410
iso27001-2013	A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nist	IA-5(h), CM-6(a)
nist-csf	PR.AC-1, PR.AC-6, PR.AC-7
pcidss	Req-8.2.1
cis	6.2.1
pcidss4	8.3.2

Rule Verify All Account Password Hashes are Shadowed with SHA512 [ref]

Verify the operating system requires the shadow password suite configuration be set to encrypt interactive user passwords using a strong cryptographic hash. Check that the interactive user account passwords are using a strong password hash with the following command:

$ sudo cut -d: -f2 /etc/shadow
$6$kcOnRq/5$NUEYPuyL.wghQwWssXRcLRFiiru7f5JPV6GaJhNC2aK5F3PZpE/BCCtwrxRc/AInKMNX3CdMw11m9STiql12f/

Password hashes ! or * indicate inactive accounts not available for logon and are not evaluated. If any interactive user password hash does not begin with $6, this is a finding.

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_password_all_shadowed_sha512

Identifiers:

CCE-85566-8

References:

disa	CCI-000196, CCI-000803
nist	IA-5(1)(c), IA-5(1).1(v), IA-7, IA-7.1
os-srg	SRG-OS-000073-GPOS-00041, SRG-OS-000120-GPOS-00061
stigid	SLES-15-020180
cis	5.4.1.1
stigref	SV-234887r877397_rule

Rule Ensure all users last password change date is in the past [ref]

All users should have a password change date in the past.

Warning: Automatic remediation is not available, in order to avoid any system disruption.

Rationale:

If a user recorded password change date is in the future then they could bypass any set password expiration.

Severity:

medium

Rule ID:

xccdf_org.ssgproject.content_rule_accounts_password_last_change_is_in_past

Identifiers:

CCE-92504-0

References:

cis	5.4.1.6
pcidss4	8.3.5

Rule All GIDs referenced in /etc/passwd must be defined in /etc/group [ref]

Add a group to the system for each GID referenced without a corresponding group.

Rationale:

If a user is assigned the Group Identifier (GID) of a group not existing on the system, and a group with the Group Identifier (GID) is subsequently created, the user may have unintended rights to any files associated with the group.

Severity:

low

Rule ID:

xccdf_org.ssgproject.content_rule_gid_passwd_group_same

Identifiers:

CCE-85847-2

References:

cis-csc	1, 12, 15, 16, 5
cjis	5.5.2
cobit5	DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
disa	CCI-000764
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
iso27001-2013	A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3
nist	IA-2, CM-6(a)
nist-csf	PR.AC-1, PR.AC-6, PR.AC-7
pcidss	Req-8.5.a
os-srg	SRG-OS-000104-GPOS-00051
cis	6.2.13
pcidss4	8.2.2

Rule Verify No .forward Files Exist [ref]

The .forward file specifies an email address to forward the user's mail to.

Rationale:

Use of the .forward file poses a security risk in that sensitive data may be inadvertently transferred outside the organization. The .forward file also poses a risk as it can be used to execute commands that may perform unintended actions.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_no_forward_files

Identifiers:

CCE-92622-0

References:

cis	6.2.9

Rule Ensure there are no legacy + NIS entries in /etc/passwd [ref]

The + character in /etc/passwd file marks a place where entries from a network information service (NIS) should be directly inserted.

Rationale:

Using this method to include entries into /etc/passwd is considered legacy and should be avoided. These entries may provide a way for an attacker to gain access to the system.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_no_legacy_plus_entries_etc_passwd

Identifiers:

CCE-91399-6

References:

cis	6.2.2

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	false
Strategy:	restrict

- name: Ensure there are no legacy + NIS entries in /etc/passwd - Backup the Old /etc/passwd
    File
  ansible.builtin.copy:
    src: /etc/passwd
    dest: /etc/passwd-
    remote_src: true
  tags:
  - CCE-91399-6
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_legacy_plus_entries_etc_passwd
  - no_reboot_needed
  - restrict_strategy

- name: Ensure there are no legacy + NIS entries in /etc/passwd - Remove Lines Starting
    with + From /etc/passwd
  ansible.builtin.lineinfile:
    regexp: ^\+.*$
    state: absent
    path: /etc/passwd
  tags:
  - CCE-91399-6
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_legacy_plus_entries_etc_passwd
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲


if grep -q '^\+' /etc/passwd; then
# backup old file to /etc/passwd-
	cp /etc/passwd /etc/passwd-
	sed -i '/^\+.*$/d' /etc/passwd
fi

Rule Ensure there are no legacy + NIS entries in /etc/shadow [ref]

The + character in /etc/shadow file marks a place where entries from a network information service (NIS) should be directly inserted.

Rationale:

Using this method to include entries into /etc/shadow is considered legacy and should be avoided. These entries may provide a way for an attacker to gain access to the system.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_no_legacy_plus_entries_etc_shadow

Identifiers:

CCE-91402-8

References:

cis	6.2.2

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	false
Strategy:	restrict

- name: Ensure there are no legacy + NIS entries in /etc/shadow - Backup the Old /etc/shadow
    File
  ansible.builtin.copy:
    src: /etc/shadow
    dest: /etc/shadow-
    remote_src: true
  tags:
  - CCE-91402-8
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_legacy_plus_entries_etc_shadow
  - no_reboot_needed
  - restrict_strategy

- name: Ensure there are no legacy + NIS entries in /etc/shadow - Remove Lines Starting
    with + From /etc/shadow
  ansible.builtin.lineinfile:
    regexp: ^\+.*$
    state: absent
    path: /etc/shadow
  tags:
  - CCE-91402-8
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_legacy_plus_entries_etc_shadow
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲


if grep -q '^\+' /etc/shadow; then
# backup old file to /etc/shadow-
	cp /etc/shadow /etc/shadow-
	sed -i '/^\+.*$/d' /etc/shadow
fi

Rule Verify No netrc Files Exist [ref]

The .netrc files contain login information used to auto-login into FTP servers and reside in the user's home directory. These files may contain unencrypted passwords to remote FTP servers making them susceptible to access by unauthorized users and should not be used. Any .netrc files should be removed.

Rationale:

Unencrypted passwords for remote FTP servers may be stored in .netrc files.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_no_netrc_files

Identifiers:

CCE-92655-0

References:

cis-csc	1, 11, 12, 14, 15, 16, 18, 3, 5
cobit5	DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10
disa	CCI-000196
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7
iso27001-2013	A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R1.3, CIP-003-8 R3, CIP-003-8 R3.1, CIP-003-8 R3.2, CIP-003-8 R3.3, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3
nist	IA-5(h), IA-5(1)(c), CM-6(a), IA-5(7)
nist-csf	PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3
cis	6.2.10

Group Restrict Root Logins Group contains 7 rules

[ref] Direct root logins should be allowed only for emergency use. In normal situations, the administrator should access the system via a unique unprivileged account, and then use su or sudo to execute privileged commands. Discouraging administrators from accessing the root account directly ensures an audit trail in organizations with multiple administrators. Locking down the channels through which root can connect directly also reduces opportunities for password-guessing against the root account. The login program uses the file /etc/securetty to determine which interfaces should allow root logins. The virtual devices /dev/console and /dev/tty* represent the system consoles (accessible via the Ctrl-Alt-F1 through Ctrl-Alt-F6 keyboard sequences on a default installation). The default securetty file also contains /dev/vc/*. These are likely to be deprecated in most environments, but may be retained for compatibility. Root should also be prohibited from connecting via network protocols. Other sections of this document include guidance describing how to prevent root from logging in via SSH.

Rule Verify Only Root Has UID 0 [ref]

If any account other than root has a UID of 0, this misconfiguration should be investigated and the accounts other than root should be removed or have their UID changed.
If the account is associated with system commands or applications the UID should be changed to one greater than "0" but less than "1000." Otherwise assign a UID greater than "1000" that has not already been assigned.

Rationale:

An account has root authority if it has a UID of 0. Multiple accounts with a UID of 0 afford more opportunity for potential intruders to guess a password for a privileged account. Proper configuration of sudo is recommended to afford multiple system administrators access to root privileges in an accountable manner.

Severity:

high

Rule ID: xccdf_org.ssgproject.content_rule_accounts_no_uid_except_zero

Identifiers:

CCE-85664-1

References:

cis-csc	1, 12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.10
cui	3.1.1, 3.1.5
disa	CCI-000366
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3
nist	CM-6(b), CM-6.1(iv)
nist-csf	PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5
pcidss	Req-8.5
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-020100
cis	6.2.3
pcidss4	8.2.1
stigref	SV-234876r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Get all /etc/passwd file entries
  getent:
    database: passwd
    split: ':'
  tags:
  - CCE-85664-1
  - DISA-STIG-SLES-15-020100
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSS-Req-8.5
  - PCI-DSSv4-8.2.1
  - accounts_no_uid_except_zero
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - restrict_strategy

- name: Lock the password of the user accounts other than root with uid 0
  command: passwd -l {{ item.key }}
  loop: '{{ getent_passwd | dict2items | rejectattr(''key'', ''search'', ''root'')
    | list }}'
  when: item.value.1  == '0'
  tags:
  - CCE-85664-1
  - DISA-STIG-SLES-15-020100
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSS-Req-8.5
  - PCI-DSSv4-8.2.1
  - accounts_no_uid_except_zero
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

awk -F: '$3 == 0 && $1 != "root" { print $1 }' /etc/passwd | xargs --no-run-if-empty --max-lines=1 passwd -l

Rule Verify Root Has A Primary GID 0 [ref]

The root user should have a primary group of 0.

Rationale:

To help ensure that root-owned files are not inadvertently exposed to other users.

Severity:

high

Rule ID: xccdf_org.ssgproject.content_rule_accounts_root_gid_zero

Identifiers:

CCE-91289-9

References:

pcidss	Req-8.1.1
cis	5.4.3
pcidss4	8.2.1

Rule Ensure the Group Used by pam_wheel.so Module Exists on System and is Empty [ref]

Ensure that the group sugroup referenced by var_pam_wheel_group_for_su variable and used as value for the pam_wheel.so group option exists and has no members. This empty group used by pam_wheel.so in /etc/pam.d/su ensures that no user can run commands with altered privileges through the su command.

Warning: Note that this rule just ensures the group exists and has no members. This rule does not configure pam_wheel.so module. The pam_wheel.so module configuration is accomplished by use_pam_wheel_group_for_su rule.

Rationale:

The su program allows to run commands with a substitute user and group ID. It is commonly used to run commands as the root user. Limiting access to such command is considered a good security practice.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_ensure_pam_wheel_group_empty

Identifiers:

CCE-92528-9

References:

cis	5.6
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92528-9
  - PCI-DSSv4-2.2.6
  - ensure_pam_wheel_group_empty
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_pam_wheel_group_for_su # promote to variable
  set_fact:
    var_pam_wheel_group_for_su: !!str sugroup
  tags:
    - always

- name: Ensure the Group Used by pam_wheel.so Module Exists on System and is Empty
    - Ensure {{ var_pam_wheel_group_for_su }} Group Exists
  ansible.builtin.group:
    name: '{{ var_pam_wheel_group_for_su }}'
    state: present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-92528-9
  - PCI-DSSv4-2.2.6
  - ensure_pam_wheel_group_empty
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Group Used by pam_wheel.so Module Exists on System and is Empty
    - Ensure {{ var_pam_wheel_group_for_su }} Group is Empty
  ansible.builtin.lineinfile:
    path: /etc/group
    regexp: ^({{ var_pam_wheel_group_for_su }}:[^:]+:[0-9]+:).*$
    line: \1
    backrefs: true
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-92528-9
  - PCI-DSSv4-2.2.6
  - ensure_pam_wheel_group_empty
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_pam_wheel_group_for_su='sugroup'


if ! grep -q "^${var_pam_wheel_group_for_su}:[^:]*:[^:]*:[^:]*" /etc/group; then
    groupadd ${var_pam_wheel_group_for_su}
fi

# group must be empty
gpasswd -M '' ${var_pam_wheel_group_for_su}

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Direct root Logins Not Allowed [ref]

To further limit access to the root account, administrators can disable root logins at the console by editing the /etc/securetty file. This file lists all devices the root user is allowed to login to. If the file does not exist at all, the root user can login through any communication device on the system, whether via the console or via a raw network interface. This is dangerous as user can login to the system as root via Telnet, which sends the password in plain text over the network. By default, SUSE Linux Enterprise 15's /etc/securetty file only allows the root user to login at the console physically attached to the system. To prevent root from logging in, remove the contents of this file. To prevent direct root logins, remove the contents of this file by typing the following command:

$ sudo echo > /etc/securetty

Warning: This rule only checks the /etc/securetty file existence and its content. If you need to restrict user access using the /etc/securetty file, make sure the pam_securetty.so PAM module is properly enabled in relevant PAM files.

Rationale:

Disabling direct root logins ensures proper accountability and multifactor authentication to privileged accounts. Users will first login, then escalate to privileged (root) access via su / sudo. This is required for FISMA Low and FISMA Moderate systems.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_no_direct_root_logins

Identifiers:

CCE-91427-5

References:

cis-csc	1, 12, 15, 16, 5
cobit5	DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui	3.1.1, 3.1.6
hipaa	164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1
iso27001-2013	A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3
nist	IA-2, CM-6(a)
nist-csf	PR.AC-1, PR.AC-6, PR.AC-7
cis	5.5
anssi	R33
pcidss4	8.6.1

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Direct root Logins Not Allowed
  copy:
    dest: /etc/securetty
    content: ''
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91427-5
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2
  - PCI-DSSv4-8.6.1
  - low_complexity
  - low_disruption
  - medium_severity
  - no_direct_root_logins
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

echo > /etc/securetty

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure that System Accounts Do Not Run a Shell Upon Login [ref]

Some accounts are not associated with a human user of the system, and exist to perform some administrative functions. Should an attacker be able to log into these accounts, they should not be granted access to a shell.

The login shell for each local account is stored in the last field of each line in /etc/passwd. System accounts are those user accounts with a user ID less than 1000. The user ID is stored in the third field. If any system account other than root has a login shell, disable it with the command:

$ sudo usermod -s /sbin/nologin account

Warning: Do not perform the steps in this section on the root account. Doing so might cause the system to become inaccessible.

Rationale:

Ensuring shells are not given to system accounts upon login makes it more difficult for attackers to make use of system accounts.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_no_shelllogin_for_systemaccounts

Identifiers:

CCE-85672-4

References:

cis-csc	1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8
cobit5	DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS06.03
disa	CCI-000366
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2
ism	1491
iso27001-2013	A.12.4.1, A.12.4.3, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nist	AC-6, CM-6(a), CM-6(b), CM-6.1(iv)
nist-csf	DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-020091
cis	5.4.2
pcidss4	8.2.2
stigref	SV-234875r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	false
Strategy:	restrict

- name: Ensure that System Accounts Do Not Run a Shell Upon Login - Get All Local
    Users From /etc/passwd
  ansible.builtin.getent:
    database: passwd
    split: ':'
  tags:
  - CCE-85672-4
  - DISA-STIG-SLES-15-020091
  - NIST-800-53-AC-6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSSv4-8.2.2
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - no_shelllogin_for_systemaccounts
  - restrict_strategy

- name: Ensure that System Accounts Do Not Run a Shell Upon Login - Create local_users
    Variable From getent_passwd Facts
  ansible.builtin.set_fact:
    local_users: '{{ ansible_facts.getent_passwd | dict2items }}'
  tags:
  - CCE-85672-4
  - DISA-STIG-SLES-15-020091
  - NIST-800-53-AC-6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSSv4-8.2.2
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - no_shelllogin_for_systemaccounts
  - restrict_strategy

- name: Ensure that System Accounts Do Not Run a Shell Upon Login -  Disable Login
    Shell for System Accounts
  ansible.builtin.user:
    name: '{{ item.key }}'
    shell: /sbin/nologin
  loop: '{{ local_users }}'
  when:
  - item.key not in ['root']
  - item.value[1]|int < 1000
  - item.value[5] not in ['/sbin/shutdown', '/sbin/halt', '/bin/sync']
  tags:
  - CCE-85672-4
  - DISA-STIG-SLES-15-020091
  - NIST-800-53-AC-6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSSv4-8.2.2
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - no_shelllogin_for_systemaccounts
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	false
Strategy:	restrict


readarray -t systemaccounts < <(awk -F: '($3 < 1000 && $3 != root \
  && $7 != "\/sbin\/shutdown" && $7 != "\/sbin\/halt" && $7 != "\/bin\/sync") \
  { print $1 }' /etc/passwd)

for systemaccount in "${systemaccounts[@]}"; do
    usermod -s /sbin/nologin "$systemaccount"
done

Rule Restrict Virtual Console Root Logins [ref]

To restrict root logins through the (deprecated) virtual console devices, ensure lines of this form do not appear in /etc/securetty:

vc/1
vc/2
vc/3
vc/4

Rationale:

Preventing direct root login to virtual console devices helps ensure accountability for actions taken on the system using the root account.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_securetty_root_login_console_only

Identifiers:

CCE-91430-9

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
cui	3.1.1, 3.1.5
disa	CCI-000770
hipaa	164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	AC-6, CM-6(a)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000324-GPOS-00125
cis	5.5
pcidss4	8.6.1

Remediation Shell script ⇲

sed -i '/^vc\/[0-9]/d' /etc/securetty

Rule Enforce Usage of pam_wheel with Group Parameter for su Authentication [ref]

To ensure that only users who are members of the group set in the group option of pam_wheel.so module can run commands with altered privileges through the su command, make sure that the following line exists in the file /etc/pam.d/su:

auth required pam_wheel.so use_uid group=sugroup

Warning: Note that ensure_pam_wheel_group_empty rule complements this requirement by ensuring the referenced group exists and has no members.

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_use_pam_wheel_group_for_su

Identifiers:

CCE-92522-2

References:

cis	5.6
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92522-2
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - use_pam_wheel_group_for_su
- name: XCCDF Value var_pam_wheel_group_for_su # promote to variable
  set_fact:
    var_pam_wheel_group_for_su: !!str sugroup
  tags:
    - always

- name: Enforce Usage of pam_wheel with Group Parameter for su Authentication - Add
    the group to the /etc/pam.d/su file
  ansible.builtin.lineinfile:
    path: /etc/pam.d/su
    state: present
    regexp: ^[\s]*#[\s]*auth[\s]+required[\s]+pam_wheel\.so[\s]+use_uid group=$
    line: auth             required        pam_wheel.so use_uid group={{ var_pam_wheel_group_for_su
      }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-92522-2
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - use_pam_wheel_group_for_su

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_pam_wheel_group_for_su='sugroup'


PAM_CONF=/etc/pam.d/su

pamstr=$(grep -P '^auth\s+required\s+pam_wheel\.so\s+(?=[^#]*\buse_uid\b)(?=[^#]*\bgroup=)' ${PAM_CONF})
if [ -z "$pamstr" ]; then
    sed -Ei '/^auth\b.*\brequired\b.*\bpam_wheel\.so/d' ${PAM_CONF} # remove any remaining uncommented pam_wheel.so line
    sed -Ei "/^auth\s+sufficient\s+pam_rootok\.so.*$/a auth             required        pam_wheel.so use_uid group=${var_pam_wheel_group_for_su}" ${PAM_CONF}
else
    group_val=$(echo -n "$pamstr" | grep -Eo '\bgroup=[_a-z][-0-9_a-z]*' | cut -d '=' -f 2)
    if [ -z "${group_val}" ] || [ ${group_val} != ${var_pam_wheel_group_for_su} ]; then
        sed -Ei "s/(^auth\s+required\s+pam_wheel.so\s+[^#]*group=)[_a-z][-0-9_a-z]*/\1${var_pam_wheel_group_for_su}/" ${PAM_CONF}
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure All Accounts on the System Have Unique User IDs [ref]

Change user IDs (UIDs), or delete accounts, so each has a unique name.

Warning: Automatic remediation of this control is not available due to unique requirements of each system.

Rationale:

To assure accountability and prevent unauthenticated access, interactive users must be identified and authenticated to prevent potential misuse and compromise of the system.

Severity:

medium

Rule ID:

xccdf_org.ssgproject.content_rule_account_unique_id

Identifiers:

CCE-83277-4

References:

disa	CCI-000135, CCI-000764, CCI-000804
pcidss	Req-8.1.1
os-srg	SRG-OS-000104-GPOS-00051, SRG-OS-000121-GPOS-00062
stigid	SLES-15-010230
cis	6.2.14
pcidss4	8.2.1
stigref	SV-234822r622137_rule

Rule Ensure All Groups on the System Have Unique Group ID [ref]

Change the group name or delete groups, so each has a unique id.

Warning: Automatic remediation of this control is not available due to the unique requirements of each system.

Rationale:

To assure accountability and prevent unauthenticated access, groups must be identified uniquely to prevent potential misuse and compromise of the system.

Severity:

medium

Rule ID:

xccdf_org.ssgproject.content_rule_group_unique_id

Identifiers:

CCE-91339-2

References:

disa	CCI-000764
os-srg	SRG-OS-000104-GPOS-00051
cis	6.2.15
pcidss4	8.2.1

Rule Ensure All Groups on the System Have Unique Group Names [ref]

Change the group name or delete groups, so each has a unique name.

Warning: Automatic remediation of this control is not available due to the unique requirements of each system.

Rationale:

To assure accountability and prevent unauthenticated access, groups must be identified uniquely to prevent potential misuse and compromise of the system.

Severity:

medium

Rule ID:

xccdf_org.ssgproject.content_rule_group_unique_name

Identifiers:

CCE-91340-0

References:

cis	6.2.17
pcidss4	8.2.1

Group Secure Session Configuration Files for Login Accounts Group contains 2 groups and 10 rules

[ref] When a user logs into a Unix account, the system configures the user's session by reading a number of files. Many of these files are located in the user's home directory, and may have weak permissions as a result of user error or misconfiguration. If an attacker can modify or even read certain types of account configuration information, they can often gain full access to the affected user's account. Therefore, it is important to test and correct configuration file permissions for interactive accounts, particularly those of privileged users such as root or system administrators.

Group Ensure that No Dangerous Directories Exist in Root's Path Group contains 2 rules

[ref] The active path of the root account can be obtained by starting a new root shell and running:

# echo $PATH

This will produce a colon-separated list of directories in the path.

Certain path elements could be considered dangerous, as they could lead to root executing unknown or untrusted programs, which could contain malicious code. Since root may sometimes work inside untrusted directories, the . character, which represents the current directory, should never be in the root path, nor should any directory which can be written to by an unprivileged or semi-privileged (system) user.

It is a good practice for administrators to always execute privileged commands by typing the full path to the command.

Rule Ensure that Root's Path Does Not Include World or Group-Writable Directories [ref]

For each element in root's path, run:

# ls -ld DIR

and ensure that write permissions are disabled for group and other.

Rationale:

Such entries increase the risk that root could execute code provided by unprivileged users, and potentially malicious code.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_root_path_dirs_no_write

Identifiers:

CCE-91401-0

References:

cis-csc	11, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05
disa	CCI-000366
isa-62443-2009	4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4
nist	CM-6(a), CM-6(a)
nist-csf	PR.IP-1
cis	6.2.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	false
Strategy:	restrict

- name: Get root paths which are not symbolic links
  stat:
    path: '{{ item }}'
  changed_when: false
  failed_when: false
  register: root_paths
  with_items: '{{ ansible_env.PATH.split('':'') }}'
  tags:
  - CCE-91401-0
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(a)
  - accounts_root_path_dirs_no_write
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Disable writability to root directories
  file:
    path: '{{ item.item }}'
    mode: g-w,o-w
  with_items: '{{ root_paths.results }}'
  when:
  - root_paths.results is defined
  - item.stat.exists
  - not item.stat.islnk
  tags:
  - CCE-91401-0
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(a)
  - accounts_root_path_dirs_no_write
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Rule Ensure that Root's Path Does Not Include Relative Paths or Null Directories [ref]

Ensure that none of the directories in root's path is equal to a single . character, or that it contains any instances that lead to relative path traversal, such as .. or beginning a path without the slash (/) character. Also ensure that there are no "empty" elements in the path, such as in these examples:

PATH=:/bin
PATH=/bin:
PATH=/bin::/sbin

These empty elements have the same effect as a single . character.

Rationale:

Including these entries increases the risk that root could execute code from an untrusted location.

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_root_path_no_dot

Identifiers:

CCE-91400-2

References:

cis-csc	11, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05
disa	CCI-000366
isa-62443-2009	4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4
nist	CM-6(a), CM-6(a)
nist-csf	PR.IP-1
cis	6.2.4

Group Ensure that Users Have Sensible Umask Values Group contains 3 rules

[ref] The umask setting controls the default permissions for the creation of new files. With a default umask setting of 077, files and directories created by users will not be readable by any other user on the system. Users who wish to make specific files group- or world-readable can accomplish this by using the chmod command. Additionally, users can make all their files readable to their group by default by setting a umask of 027 in their shell configuration files. If default per-user groups exist (that is, if every user has a default group whose name is the same as that user's username and whose only member is the user), then it may even be safe for users to select a umask of 007, making it very easy to intentionally share files with groups of which the user is a member.

Rule Ensure the Default Bash Umask is Set Correctly [ref]

To ensure the default umask for users of the Bash shell is set properly, add or correct the umask setting in /etc/bash.bashrc to read as follows:

umask 027

Rationale:

The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_umask_etc_bashrc

Identifiers:

CCE-91215-4

References:

cis-csc	18
cobit5	APO13.01, BAI03.01, BAI03.02, BAI03.03
disa	CCI-000366
isa-62443-2009	4.3.4.3.3
iso27001-2013	A.14.1.1, A.14.2.1, A.14.2.5, A.6.1.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	AC-6(1), CM-6(a)
nist-csf	PR.IP-2
os-srg	SRG-OS-000480-GPOS-00228, SRG-OS-000480-GPOS-00227
cis	5.4.5
anssi	R36

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91215-4
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_user_umask # promote to variable
  set_fact:
    var_accounts_user_umask: !!str 027
  tags:
    - always

- name: Check if umask in /etc/bash.bashrc is already set
  ansible.builtin.lineinfile:
    path: /etc/bash.bashrc
    regexp: ^[^#]*\bumask\s+\d+$
    state: absent
  check_mode: true
  changed_when: false
  register: umask_replace
  when: '"bash" in ansible_facts.packages'
  tags:
  - CCE-91215-4
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Replace user umask in /etc/bash.bashrc
  ansible.builtin.replace:
    path: /etc/bash.bashrc
    regexp: ^([^#]*\b)umask\s+\d+$
    replace: \g<1>umask {{ var_accounts_user_umask }}
  when:
  - '"bash" in ansible_facts.packages'
  - umask_replace.found > 0
  tags:
  - CCE-91215-4
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default umask is Appended Correctly
  ansible.builtin.lineinfile:
    create: true
    path: /etc/bash.bashrc
    line: umask {{ var_accounts_user_umask }}
  when:
  - '"bash" in ansible_facts.packages'
  - umask_replace.found == 0
  tags:
  - CCE-91215-4
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q bash; then

var_accounts_user_umask='027'






grep -q "^[^#]*\bumask" /etc/bash.bashrc && \
  sed -i -E -e "s/^([^#]*\bumask).*/\1 $var_accounts_user_umask/g" /etc/bash.bashrc
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/bash.bashrc
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure the Default Umask is Set Correctly in login.defs [ref]

To ensure the default umask controlled by /etc/login.defs is set properly, add or correct the UMASK setting in /etc/login.defs to read as follows:

UMASK 027

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_umask_etc_login_defs

Identifiers:

CCE-85659-1

References:

cis-csc	11, 18, 3, 9
cobit5	APO13.01, BAI03.01, BAI03.02, BAI03.03, BAI10.01, BAI10.02, BAI10.03, BAI10.05
disa	CCI-000366
isa-62443-2009	4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.1.1, A.14.2.1, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.5, A.6.1.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	AC-6(1), CM-6(a)
nist-csf	PR.IP-1, PR.IP-2
os-srg	SRG-OS-000480-GPOS-00228
stigid	SLES-15-040420
cis	5.4.5
anssi	R36
stigref	SV-235030r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-85659-1
  - DISA-STIG-SLES-15-040420
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_user_umask # promote to variable
  set_fact:
    var_accounts_user_umask: !!str 027
  tags:
    - always

- name: Check if UMASK is already set
  ansible.builtin.lineinfile:
    path: /etc/login.defs
    regexp: ^(\s*)UMASK\s+.*
    state: absent
  check_mode: true
  changed_when: false
  register: result_umask_is_set
  when: '"shadow" in ansible_facts.packages'
  tags:
  - CCE-85659-1
  - DISA-STIG-SLES-15-040420
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Replace user UMASK in /etc/login.defs
  ansible.builtin.replace:
    path: /etc/login.defs
    regexp: ^(\s*)UMASK(\s+).*
    replace: \g<1>UMASK\g<2>{{ var_accounts_user_umask }}
  when:
  - '"shadow" in ansible_facts.packages'
  - result_umask_is_set.found > 0
  tags:
  - CCE-85659-1
  - DISA-STIG-SLES-15-040420
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default UMASK is Appended Correctly
  ansible.builtin.lineinfile:
    create: true
    path: /etc/login.defs
    line: UMASK {{ var_accounts_user_umask }}
  when:
  - '"shadow" in ansible_facts.packages'
  - result_umask_is_set.found == 0
  tags:
  - CCE-85659-1
  - DISA-STIG-SLES-15-040420
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_login_defs
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q shadow; then

var_accounts_user_umask='027'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^UMASK")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$var_accounts_user_umask"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^UMASK\\>" "/etc/login.defs"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^UMASK\\>.*/$escaped_formatted_output/gi" "/etc/login.defs"
else
    if [[ -s "/etc/login.defs" ]] && [[ -n "$(tail -c 1 -- "/etc/login.defs" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/login.defs"
    fi
    cce="CCE-85659-1"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/login.defs" >> "/etc/login.defs"
    printf '%s\n' "$formatted_output" >> "/etc/login.defs"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure the Default Umask is Set Correctly in /etc/profile [ref]

To ensure the default umask controlled by /etc/profile is set properly, add or correct the umask setting in /etc/profile to read as follows:

umask 027

Note that /etc/profile also reads scrips within /etc/profile.d directory. These scripts are also valid files to set umask value. Therefore, they should also be considered during the check and properly remediated, if necessary.

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_umask_etc_profile

Identifiers:

CCE-91216-2

References:

cis-csc	18
cobit5	APO13.01, BAI03.01, BAI03.02, BAI03.03
disa	CCI-000366
isa-62443-2009	4.3.4.3.3
iso27001-2013	A.14.1.1, A.14.2.1, A.14.2.5, A.6.1.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	AC-6(1), CM-6(a)
nist-csf	PR.IP-2
os-srg	SRG-OS-000480-GPOS-00228, SRG-OS-000480-GPOS-00227
cis	5.4.5
anssi	R36

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value var_accounts_user_umask # promote to variable
  set_fact:
    var_accounts_user_umask: !!str 027
  tags:
    - always

- name: Ensure the Default Umask is Set Correctly in /etc/profile - Locate Profile
    Configuration Files Where umask Is Defined
  ansible.builtin.find:
    paths:
    - /etc/profile.d
    patterns:
    - sh.local
    - '*.sh'
    contains: ^[\s]*umask\s+\d+
  register: result_profile_d_files
  tags:
  - CCE-91216-2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default Umask is Set Correctly in /etc/profile - Replace Existing
    umask Value in Files From /etc/profile.d
  ansible.builtin.replace:
    path: '{{ item.path }}'
    regexp: ^(\s*)umask\s+\d+
    replace: \1umask {{ var_accounts_user_umask }}
  loop: '{{ result_profile_d_files.files }}'
  register: result_umask_replaced_profile_d
  when: result_profile_d_files.matched
  tags:
  - CCE-91216-2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default Umask is Set Correctly in /etc/profile - Ensure umask Is
    Set in /etc/profile if Not Already Set Elsewhere
  ansible.builtin.lineinfile:
    create: true
    mode: 420
    path: /etc/profile
    line: umask {{ var_accounts_user_umask }}
  when: not result_profile_d_files.matched
  tags:
  - CCE-91216-2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default Umask is Set Correctly in /etc/profile - Ensure umask Value
    For All Existing umask Definition in /etc/profile
  ansible.builtin.replace:
    path: /etc/profile
    regexp: ^(\s*)umask\s+\d+
    replace: \1umask {{ var_accounts_user_umask }}
  register: result_umask_replaced_profile
  tags:
  - CCE-91216-2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict


var_accounts_user_umask='027'


readarray -t profile_files < <(find /etc/profile.d/ -type f -name '*.sh' -or -name 'sh.local')

for file in "${profile_files[@]}" /etc/profile; do
  grep -qE '^[^#]*umask' "$file" && sed -i -E "s/^(\s*umask\s*)[0-7]+/\1$var_accounts_user_umask/g" "$file"
done

if ! grep -qrE '^[^#]*umask' /etc/profile*; then
  echo "umask $var_accounts_user_umask" >> /etc/profile
fi

Rule Set Interactive Session Timeout [ref]

Setting the TMOUT option in /etc/profile ensures that all user sessions will terminate based on inactivity. The value of TMOUT should be exported and read only. The TMOUT setting in /etc/profile.d/autologout.sh should read as follows:

TMOUT=900

readonly TMOUT export TMOUT

Rationale:

Terminating an idle session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_tmout

Identifiers:

CCE-83269-1

References:

cis-csc	1, 12, 15, 16
cobit5	DSS05.04, DSS05.10, DSS06.10
cui	3.1.11
disa	CCI-000057, CCI-001133, CCI-002361
isa-62443-2009	4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
iso27001-2013	A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nerc-cip	CIP-004-6 R2.2.3, CIP-007-3 R5.1, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3
nist	AC-12, SC-10, AC-2(5), CM-6(a)
nist-csf	PR.AC-7
ospp	FMT_MOF_EXT.1
os-srg	SRG-OS-000163-GPOS-00072, SRG-OS-000029-GPOS-00010
stigid	SLES-15-010130
cis	5.4.4
anssi	R32
pcidss4	8.6.1
stigref	SV-234813r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value var_accounts_tmout # promote to variable
  set_fact:
    var_accounts_tmout: !!str 900
  tags:
    - always

- name: Set Interactive Session Timeout
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/profile.d/autologout.sh
      create: true
      regexp: ^\s*TMOUT=
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/profile.d/autologout.sh
    lineinfile:
      path: /etc/profile.d/autologout.sh
      create: true
      regexp: ^\s*TMOUT=
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/profile.d/autologout.sh
    lineinfile:
      path: /etc/profile.d/autologout.sh
      create: true
      regexp: ^\s*TMOUT=
      line: TMOUT={{ var_accounts_tmout }}
      state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83269-1
  - DISA-STIG-SLES-15-010130
  - NIST-800-171-3.1.11
  - NIST-800-53-AC-12
  - NIST-800-53-AC-2(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-10
  - PCI-DSSv4-8.6.1
  - accounts_tmout
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interactive Session Timeout
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/profile.d/autologout.sh
      create: true
      regexp: ^\s*readonly\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/profile.d/autologout.sh
    lineinfile:
      path: /etc/profile.d/autologout.sh
      create: true
      regexp: ^\s*readonly\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/profile.d/autologout.sh
    lineinfile:
      path: /etc/profile.d/autologout.sh
      create: true
      regexp: ^\s*readonly\s+
      line: readonly TMOUT
      state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83269-1
  - DISA-STIG-SLES-15-010130
  - NIST-800-171-3.1.11
  - NIST-800-53-AC-12
  - NIST-800-53-AC-2(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-10
  - PCI-DSSv4-8.6.1
  - accounts_tmout
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interactive Session Timeout
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/profile.d/autologout.sh
      create: true
      regexp: ^\s*export\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/profile.d/autologout.sh
    lineinfile:
      path: /etc/profile.d/autologout.sh
      create: true
      regexp: ^\s*export\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/profile.d/autologout.sh
    lineinfile:
      path: /etc/profile.d/autologout.sh
      create: true
      regexp: ^\s*export\s+
      line: export TMOUT
      state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83269-1
  - DISA-STIG-SLES-15-010130
  - NIST-800-171-3.1.11
  - NIST-800-53-AC-12
  - NIST-800-53-AC-2(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-10
  - PCI-DSSv4-8.6.1
  - accounts_tmout
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set the permission for /etc/profile.d/autologout.sh
  file:
    path: /etc/profile.d/autologout.sh
    mode: '0755'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - lookup('ansible.builtin.file', '/etc/profile.d/autologout.sh', errors='warn')
  tags:
  - CCE-83269-1
  - DISA-STIG-SLES-15-010130
  - NIST-800-171-3.1.11
  - NIST-800-53-AC-12
  - NIST-800-53-AC-2(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-10
  - PCI-DSSv4-8.6.1
  - accounts_tmout
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_accounts_tmout='900'


if [ -f /etc/profile.d/autologout.sh ]; then
    if grep --silent '^\s*TMOUT' /etc/profile.d/autologout.sh ; then
        sed -i -E "s/^(\s*)TMOUT\s*=\s*(\w|\$)*(.*)$/\1TMOUT=$var_accounts_tmout\3/g" /etc/profile.d/autologout.sh
    fi
else
    echo -e "\n# Set TMOUT to $var_accounts_tmout per security requirements" >> /etc/profile.d/autologout.sh
    echo "TMOUT=$var_accounts_tmout" >> /etc/profile.d/autologout.sh
fi
if ! grep --silent '^\s*readonly TMOUT' /etc/profile.d/autologout.sh ; then
    echo "readonly TMOUT" >> /etc/profile.d/autologout.sh
fi

if ! grep --silent '^\s*export TMOUT' /etc/profile.d/autologout.sh ; then
    echo "export TMOUT" >> /etc/profile.d/autologout.sh
fi
chmod +x /etc/profile.d/autologout.sh

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule All Interactive Users Home Directories Must Exist [ref]

Create home directories to all local interactive users that currently do not have a home directory assigned. Use the following commands to create the user home directory assigned in /etc/passwd:

$ sudo mkdir /home/USER

Rationale:

If a local interactive user has a home directory defined that does not exist, the user may be given access to the / directory as the current working directory upon logon. This could create a Denial of Service because the user would not be able to access their logon configuration files, and it may give them visibility to system files they normally would not be able to access.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_user_interactive_home_directory_exists

Identifiers:

CCE-85628-6

References:

disa	CCI-000366
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040080
cis	6.2.5
stigref	SV-234992r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Get all local users from /etc/passwd
  ansible.builtin.getent:
    database: passwd
    split: ':'
  tags:
  - CCE-85628-6
  - DISA-STIG-SLES-15-040080
  - accounts_user_interactive_home_directory_exists
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Create local_users variable from the getent output
  ansible.builtin.set_fact:
    local_users: '{{ ansible_facts.getent_passwd|dict2items }}'
  tags:
  - CCE-85628-6
  - DISA-STIG-SLES-15-040080
  - accounts_user_interactive_home_directory_exists
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure interactive users have a home directory exists
  ansible.builtin.user:
    name: '{{ item.key }}'
    create_home: true
  loop: '{{ local_users }}'
  when:
  - item.value[2]|int >= 1000
  - item.value[2]|int != 65534
  tags:
  - CCE-85628-6
  - DISA-STIG-SLES-15-040080
  - accounts_user_interactive_home_directory_exists
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict


for user in $(awk -F':' '{ if ($3 >= 1000 && $3 != 65534) print $1}' /etc/passwd); do
    mkhomedir_helper $user 0077;
done

Rule All User Files and Directories In The Home Directory Must Have Mode 0750 Or Less Permissive [ref]

Set the mode on files and directories in the local interactive user home directory with the following command:

$ sudo chmod 0750 /home/USER/FILE_DIR

Files that begin with a "." are excluded from this requirement.

Rationale:

If a local interactive user files have excessive permissions, unintended users may be able to access or modify them.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_users_home_files_permissions

Identifiers:

CCE-91403-6

References:

disa	CCI-000366
os-srg	SRG-OS-000480-GPOS-00227
cis	6.2.6
anssi	R50

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Get all local users from /etc/passwd
  ansible.builtin.getent:
    database: passwd
    split: ':'
  tags:
  - CCE-91403-6
  - accounts_users_home_files_permissions
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Create local_users variable from the getent output
  ansible.builtin.set_fact:
    local_users: '{{ ansible_facts.getent_passwd|dict2items }}'
  tags:
  - CCE-91403-6
  - accounts_users_home_files_permissions
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Test for existence home directories to avoid creating them.
  ansible.builtin.stat:
    path: '{{ item.value[4] }}'
  register: path_exists
  loop: '{{ local_users }}'
  when:
  - item.value[1]|int >= 1000
  - item.value[1]|int != 65534
  tags:
  - CCE-91403-6
  - accounts_users_home_files_permissions
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure interactive local users have proper permissions on their respective
    home directories
  ansible.builtin.file:
    path: '{{ item.0.value[4] }}'
    mode: u-s,g-w-s,o=-
    follow: false
    recurse: true
  loop: '{{ local_users|zip(path_exists.results)|list }}'
  when: item.1.stat is defined and item.1.stat.exists
  tags:
  - CCE-91403-6
  - accounts_users_home_files_permissions
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict


for home_dir in $(awk -F':' '{ if ($3 >= 1000 && $3 != 65534) print $6 }' /etc/passwd); do
    # Only update the permissions when necessary. This will avoid changing the inode timestamp when
    # the permission is already defined as expected, therefore not impacting in possible integrity
    # check systems that also check inodes timestamps.
    find "$home_dir" -perm /7027 -exec chmod u-s,g-w-s,o=- {} \;
done

Rule Ensure users' .netrc Files are not group or world accessible [ref]

While the system administrator can establish secure permissions for users' .netrc files, the users can easily override these. This rule ensures every .netrc file or directory under the home directory related to an interactive user is not group or world accessible

Rationale:

.netrc files may contain unencrypted passwords that may be used to attack other systems. Note: While the complete removal of .netrc files is recommended, if any are required on the system, secure permissions must be applied.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_accounts_users_netrc_file_permissions

Identifiers:

CCE-92697-2

References:

cis	6.2.11

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Get all local users from /etc/passwd
  ansible.builtin.getent:
    database: passwd
    split: ':'
  tags:
  - CCE-92697-2
  - accounts_users_netrc_file_permissions
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Create local_users variable from the getent output
  ansible.builtin.set_fact:
    local_users: '{{ ansible_facts.getent_passwd|dict2items }}'
  tags:
  - CCE-92697-2
  - accounts_users_netrc_file_permissions
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Test for existence of .netrc file in home directories to avoid creating them,
    but only fixing permissions
  ansible.builtin.stat:
    path: '{{ item.value[4] }}/.netrc'
  register: path_exists
  loop: '{{ local_users }}'
  when:
  - item.value[1]|int >= 1000
  - item.value[1]|int != 65534
  tags:
  - CCE-92697-2
  - accounts_users_netrc_file_permissions
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure group and world cannot access respective .netrc files
  ansible.builtin.file:
    path: '{{ item.item.value[4] }}/.netrc'
    mode: '0600'
    state: file
  loop: '{{ path_exists.results }}'
  when: item.stat is defined and item.stat.exists
  tags:
  - CCE-92697-2
  - accounts_users_netrc_file_permissions
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict


for user in $(awk -F':' '{ if ($3 >= 1000 && $3 != 65534) print $1 }' /etc/passwd); do
    home_dir=$(getent passwd "$user" | cut -d: -f6)
    find "${home_dir}/.netrc" -exec chmod 0600 {} \;
done

Rule All Interactive User Home Directories Must Have mode 0750 Or Less Permissive [ref]

Change the mode of interactive users home directories to 0750. To change the mode of interactive users home directory, use the following command:

$ sudo chmod 0750 /home/USER

Rationale:

Excessive permissions on local interactive user home directories may allow unauthorized access to user files by other users.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_home_directories

Identifiers:

CCE-85629-4

References:

disa	CCI-000366
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040090
cis	6.2.6
stigref	SV-234993r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Get all local users from /etc/passwd
  ansible.builtin.getent:
    database: passwd
    split: ':'
  tags:
  - CCE-85629-4
  - DISA-STIG-SLES-15-040090
  - file_permissions_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Create local_users variable from the getent output
  ansible.builtin.set_fact:
    local_users: '{{ ansible_facts.getent_passwd|dict2items }}'
  tags:
  - CCE-85629-4
  - DISA-STIG-SLES-15-040090
  - file_permissions_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Test for existence home directories to avoid creating them.
  ansible.builtin.stat:
    path: '{{ item.value[4] }}'
  register: path_exists
  loop: '{{ local_users }}'
  when:
  - item.value[1]|int >= 1000
  - item.value[1]|int != 65534
  tags:
  - CCE-85629-4
  - DISA-STIG-SLES-15-040090
  - file_permissions_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure interactive local users have proper permissions on their respective
    home directories
  ansible.builtin.file:
    path: '{{ item.0.value[4] }}'
    mode: u-s,g-w-s,o=-
    follow: false
    recurse: false
  loop: '{{ local_users|zip(path_exists.results)|list }}'
  when: item.1.stat is defined and item.1.stat.exists
  tags:
  - CCE-85629-4
  - DISA-STIG-SLES-15-040090
  - file_permissions_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict


for home_dir in $(awk -F':' '{ if ($3 >= 1000 && $3 != 65534) print $6 }' /etc/passwd); do
    # Only update the permissions when necessary. This will avoid changing the inode timestamp when
    # the permission is already defined as expected, therefore not impacting in possible integrity
    # check systems that also check inodes timestamps.
    find "$home_dir" -maxdepth 0 -perm /7027 -exec chmod u-s,g-w-s,o=- {} \;
done

Group AppArmor Group contains 3 rules

[ref] Many security vulnerabilities result from bugs in trusted programs. A trusted program runs with privileges that attackers want to possess. The program fails to keep that trust if there is a bug in the program that allows the attacker to acquire said privilege.

AppArmor® is an application security solution designed specifically to apply privilege confinement to suspect programs. AppArmor allows the administrator to specify the domain of activities the program can perform by developing a security profile. A security profile is a listing of files that the program may access and the operations the program may perform. AppArmor secures applications by enforcing good application behavior without relying on attack signatures, so it can prevent attacks even if previously unknown vulnerabilities are being exploited.

For more information on using AppArmor, see https://www.suse.com/documentation/sles-12/book_security/data/cha_apparmor_intro.html.

Rule Install the pam_apparmor Package [ref]

The pam_apparmor package can be installed with the following command:

$ sudo zypper install pam_apparmor

Rationale:

Protection of system integrity using AppArmor depends on this package being installed.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_pam_apparmor_installed

Identifiers:

CCE-85765-6

References:

disa	CCI-001764, CCI-001774, CCI-002165, CCI-002233, CCI-002235
nist	AC-3(4), AC-6(8), AC-6(10), CM-7(5)(b), CM-7(2), SC-7(21), CM-6(a)
os-srg	SRG-OS-000312-GPOS-00122, SRG-OS-000312-GPOS-00123, SRG-OS-000312-GPOS-00124, SRG-OS-000324-GPOS-00125, SRG-OS-000326-GPOS-00126, SRG-OS-000370-GPOS-00155, SRG-OS-000480-GPOS-00230, SRG-OS-000480-GPOS-00227, SRG-OS-000480-GPOS-00231, SRG-OS-000480-GPOS-00232
stigid	SLES-15-010390
cis	1.7.1.1
stigref	SV-234848r854194_rule

Remediation OSBuild Blueprint snippet ⇲


[[packages]]
name = "pam_apparmor"
version = "*"

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

- name: Ensure pam_apparmor is installed
  package:
    name: pam_apparmor
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85765-6
  - DISA-STIG-SLES-15-010390
  - NIST-800-53-AC-3(4)
  - NIST-800-53-AC-6(10)
  - NIST-800-53-AC-6(8)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(2)
  - NIST-800-53-CM-7(5)(b)
  - NIST-800-53-SC-7(21)
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_pam_apparmor_installed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include install_pam_apparmor

class install_pam_apparmor {
  package { 'pam_apparmor':
    ensure => 'installed',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

zypper install -y "pam_apparmor"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule All AppArmor Profiles are in enforce or complain mode [ref]

AppArmor profiles define what resources applications are able to access. To set all profiles to either enforce or complain mode run the following command to set all profiles to enforce mode:

$ sudo aa-enforce /etc/apparmor.d/*

run the following command to set all profiles to complain mode:

$ sudo aa-complain /etc/apparmor.d/*

To list unconfined processes run the following command:

$ sudo aa-unconfined

Any unconfined processes may need to have a profile created or activated for them and then be restarted.

Rationale:

Security configuration requirements vary from site to site. Some sites may mandate a policy that is stricter than the default policy, which is perfectly acceptable. This recommendation is intended to ensure that any policies that exist on the system are activated.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_all_apparmor_profiles_in_enforce_complain_mode

Identifiers:

CCE-92548-7

References:

cis	1.7.1.3

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92548-7
  - all_apparmor_profiles_in_enforce_complain_mode
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_apparmor_mode # promote to variable
  set_fact:
    var_apparmor_mode: !!str complain
  tags:
    - always

- name: All AppArmor Profiles are in enforce or complain mode - Ensure all AppArmor
    Profiles are reloaded
  ansible.builtin.command: apparmor_parser -q -r /etc/apparmor.d/
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"apparmor-profiles" in ansible_facts.packages'
  tags:
  - CCE-92548-7
  - all_apparmor_profiles_in_enforce_complain_mode
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: All AppArmor Profiles are in enforce or complain mode - Set all AppArmor profiles
    to enforce mode
  ansible.builtin.command: aa-enforce /etc/apparmor.d/*
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"apparmor-profiles" in ansible_facts.packages'
  - var_apparmor_mode == 'enforce'
  tags:
  - CCE-92548-7
  - all_apparmor_profiles_in_enforce_complain_mode
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: All AppArmor Profiles are in enforce or complain mode - Set all AppArmor profiles
    to complain mode
  ansible.builtin.command: aa-complain /etc/apparmor.d/*
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"apparmor-profiles" in ansible_facts.packages'
  - var_apparmor_mode == 'complain'
  tags:
  - CCE-92548-7
  - all_apparmor_profiles_in_enforce_complain_mode
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: All AppArmor Profiles are in enforce or complain mode - Collect unconfined
    processes
  ansible.builtin.command: aa-unconfined
  register: unconfined_processes
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"apparmor-profiles" in ansible_facts.packages'
  tags:
  - CCE-92548-7
  - all_apparmor_profiles_in_enforce_complain_mode
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: All AppArmor Profiles are in enforce or complain mode - Provide details about
    unconfined processes
  ansible.builtin.assert:
    that:
    - unconfined_processes.stdout_lines | length > 0
    success_msg: The process {{ item }} may need to have a profile created or activated
      for them and then be restarted.
    fail_msg: ''
  with_items: '{{ unconfined_processes.stdout_lines }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"apparmor-profiles" in ansible_facts.packages'
  - unconfined_processes is not skipped
  tags:
  - CCE-92548-7
  - all_apparmor_profiles_in_enforce_complain_mode
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q apparmor-profiles; }; then

var_apparmor_mode='complain'


# make sure apparmor-utils is installed for aa-complain and aa-enforce
zypper install -y "apparmor-utils"

# Reload all AppArmor profiles
apparmor_parser -q -r /etc/apparmor.d/

# Set the mode
APPARMOR_MODE="$var_apparmor_mode"

if [ "$APPARMOR_MODE" = "enforce" ]
then
  # Set all profiles to enforce mode
  aa-enforce /etc/apparmor.d/*
fi

if [ "$APPARMOR_MODE" = "complain" ]
then
  # Set all profiles to complain mode
  aa-complain /etc/apparmor.d/*
fi


UNCONFINED=$(aa-unconfined)
if [ ! -z "$UNCONFINED" ]

then
  echo -e "***WARNING***: There are some unconfined processes:"
  echo -e "----------------------------"
  echo "The may need to have a profile created or activated for them and then be restarted."
  for PROCESS in "${UNCONFINED[@]}"
  do
      echo "$PROCESS"
  done
  echo -e "----------------------------"
  echo "The may need to have a profile created or activated for them and then be restarted."
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure AppArmor is Active and Configured [ref]

Verify that the Apparmor tool is configured to control whitelisted applications and user home directory access control.

The apparmor service can be enabled with the following command:

$ sudo systemctl enable apparmor.service

Rationale:

Using a whitelist provides a configuration management method for allowing the execution of only authorized software. Using only authorized software decreases risk by limiting the number of potential vulnerabilities.

The organization must identify authorized software programs and permit execution of authorized software by adding each authorized program to the "pam_apparmor" exception policy. The process used to identify software programs that are authorized to execute on organizational information systems is commonly referred to as whitelisting.

Verification of whitelisted software occurs prior to execution or at system startup.

Users' home directories/folders may contain information of a sensitive nature. Nonprivileged users should coordinate any sharing of information with a System Administrator (SA) through shared resources.

Apparmor can confine users to their home directory, not allowing them to make any changes outside of their own home directories. Confining users to their home directory will minimize the risk of sharing information.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_apparmor_configured

Identifiers:

CCE-85752-4

References:

disa	CCI-001764, CCI-001774, CCI-002165, CCI-002233, CCI-002235
nist	AC-3(4), AC-6(8), AC-6(10), CM-7(5)(b), CM-7(2), SC-7(21), CM-6(a)
os-srg	SRG-OS-000312-GPOS-00122, SRG-OS-000312-GPOS-00123, SRG-OS-000312-GPOS-00124, SRG-OS-000324-GPOS-00125, SRG-OS-000326-GPOS-00126, SRG-OS-000370-GPOS-00155, SRG-OS-000480-GPOS-00230, SRG-OS-000480-GPOS-00227, SRG-OS-000480-GPOS-00231, SRG-OS-000480-GPOS-00232
stigid	SLES-15-010390
cis	1.7.1.2
stigref	SV-234848r854194_rule

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
enabled = ["apparmor"]

Remediation Ansible snippet ⇲

- name: Start apparmor.service
  systemd:
    name: apparmor.service
    state: started
    enabled: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85752-4
  - DISA-STIG-SLES-15-010390
  - NIST-800-53-AC-3(4)
  - NIST-800-53-AC-6(10)
  - NIST-800-53-AC-6(8)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(2)
  - NIST-800-53-CM-7(5)(b)
  - NIST-800-53-SC-7(21)
  - apparmor_configured
  - medium_severity

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include enable_apparmor

class enable_apparmor {
  service {'apparmor':
    enable => true,
    ensure => 'running',
  }
}

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Enable apparmor
/usr/bin/systemctl enable "apparmor"
/usr/bin/systemctl start "apparmor"
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
if /usr/bin/systemctl --failed | grep -q "apparmor"; then
    /usr/bin/systemctl reset-failed "apparmor"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group GRUB2 bootloader configuration Group contains 2 groups and 5 rules

[ref] During the boot process, the boot loader is responsible for starting the execution of the kernel and passing options to it. The boot loader allows for the selection of different kernels - possibly on different partitions or media. The default SUSE Linux Enterprise 15 boot loader for x86 systems is called GRUB2. Options it can pass to the kernel include single-user mode, which provides root access without any authentication, and the ability to disable SELinux. To prevent local users from modifying the boot parameters and endangering security, protect the boot loader configuration with a password and ensure its configuration file's permissions are set properly.

Group Non-UEFI GRUB2 bootloader configuration Group contains 4 rules

[ref] Non-UEFI GRUB2 bootloader configuration

Rule Verify /boot/grub2/grub.cfg Group Ownership [ref]

The file /boot/grub2/grub.cfg should be group-owned by the root group to prevent destruction or modification of the file. To properly set the group owner of /boot/grub2/grub.cfg, run the command:

$ sudo chgrp root /boot/grub2/grub.cfg

Rationale:

The root group is a highly-privileged group. Furthermore, the group-owner of this file should not have any access privileges anyway.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_grub2_cfg

Identifiers:

CCE-85849-8

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cjis	5.5.2.2
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
cui	3.4.5
disa	CCI-000225
hipaa	164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
pcidss	Req-7.1
os-srg	SRG-OS-000480-GPOS-00227
cis	1.5.2
anssi	R29
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-85849-8
  - CJIS-5.5.2.2
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-7.1
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Test for existence /boot/grub2/grub.cfg
  stat:
    path: /boot/grub2/grub.cfg
  register: file_exists
  when:
  - '"/boot/efi" not in ansible_mounts | map(attribute="mount") | list'
  - '"grub2" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85849-8
  - CJIS-5.5.2.2
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-7.1
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /boot/grub2/grub.cfg
  file:
    path: /boot/grub2/grub.cfg
    group: '0'
  when:
  - '"/boot/efi" not in ansible_mounts | map(attribute="mount") | list'
  - '"grub2" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-85849-8
  - CJIS-5.5.2.2
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-7.1
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -d /sys/firmware/efi ] && rpm --quiet -q grub2 && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

chgrp 0 /boot/grub2/grub.cfg

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify /boot/grub2/grub.cfg User Ownership [ref]

The file /boot/grub2/grub.cfg should be owned by the root user to prevent destruction or modification of the file. To properly set the owner of /boot/grub2/grub.cfg, run the command:

$ sudo chown root /boot/grub2/grub.cfg

Rationale:

Only root should be able to modify important boot parameters.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_grub2_cfg

Identifiers:

CCE-85848-0

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cjis	5.5.2.2
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
cui	3.4.5
disa	CCI-000225
hipaa	164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
pcidss	Req-7.1
os-srg	SRG-OS-000480-GPOS-00227
cis	1.5.2
anssi	R29
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-85848-0
  - CJIS-5.5.2.2
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-7.1
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Test for existence /boot/grub2/grub.cfg
  stat:
    path: /boot/grub2/grub.cfg
  register: file_exists
  when:
  - '"/boot/efi" not in ansible_mounts | map(attribute="mount") | list'
  - '"grub2" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85848-0
  - CJIS-5.5.2.2
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-7.1
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /boot/grub2/grub.cfg
  file:
    path: /boot/grub2/grub.cfg
    owner: '0'
  when:
  - '"/boot/efi" not in ansible_mounts | map(attribute="mount") | list'
  - '"grub2" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-85848-0
  - CJIS-5.5.2.2
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-7.1
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -d /sys/firmware/efi ] && rpm --quiet -q grub2 && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

chown 0 /boot/grub2/grub.cfg

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify /boot/grub2/grub.cfg Permissions [ref]

File permissions for /boot/grub2/grub.cfg should be set to 600. To properly set the permissions of /boot/grub2/grub.cfg, run the command:

$ sudo chmod 600 /boot/grub2/grub.cfg

Rationale:

Proper permissions ensure that only the root user can modify important boot parameters.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_grub2_cfg

Identifiers:

CCE-91426-7

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
cui	3.4.5
disa	CCI-000225
hipaa	164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
cis	1.5.2
anssi	R29
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91426-7
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Test for existence /boot/grub2/grub.cfg
  stat:
    path: /boot/grub2/grub.cfg
  register: file_exists
  when:
  - '"/boot/efi" not in ansible_mounts | map(attribute="mount") | list'
  - '"grub2" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91426-7
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xwrs,o-xwrt on /boot/grub2/grub.cfg
  file:
    path: /boot/grub2/grub.cfg
    mode: u-xs,g-xwrs,o-xwrt
  when:
  - '"/boot/efi" not in ansible_mounts | map(attribute="mount") | list'
  - '"grub2" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91426-7
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -d /sys/firmware/efi ] && rpm --quiet -q grub2 && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

chmod u-xs,g-xwrs,o-xwrt /boot/grub2/grub.cfg

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Set Boot Loader Password in grub2 [ref]

The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings.

Since plaintext passwords are a security risk, generate a hash for the password by running the following command:

# grub2-mkpasswd-pbkdf2

When prompted, enter the password that was selected.

Using the hash from the output, modify the /etc/grub.d/40_custom file with the following content:

set superusers="boot"
password_pbkdf2 boot grub.pbkdf2.sha512.VeryLongString

NOTE: the bootloader superuser account and password MUST differ from the root account and password. Once the superuser password has been added, update the grub.cfg file by running:

grub2-mkconfig -o /boot/grub2/grub2.cfg

Warning: To prevent hard-coded passwords, automatic remediation of this control is not available. Remediation must be automated as a component of machine provisioning, or followed manually as outlined above. Also, do NOT manually add the superuser account and password to the grub.cfg file as the grub2-mkconfig command overwrites this file.

Rationale:

Password protection on the boot loader configuration ensures users with physical access cannot trivially alter important bootloader settings. These include which kernel to use, and whether to enter single-user mode.

Severity:

high

Rule ID: xccdf_org.ssgproject.content_rule_grub2_password

Identifiers:

CCE-83274-1

References:

cis-csc	1, 11, 12, 14, 15, 16, 18, 3, 5
cobit5	DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10
cui	3.4.5
disa	CCI-000213
hipaa	164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7
iso27001-2013	A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nist	CM-6(a)
nist-csf	PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3
ospp	FIA_UAU.1
os-srg	SRG-OS-000080-GPOS-00048
stigid	SLES-15-010190
cis	1.5.1
anssi	R5
stigref	SV-234819r622137_rule

Group UEFI GRUB2 bootloader configuration Group contains 1 rule

[ref] UEFI GRUB2 bootloader configuration

Warning: UEFI generally uses vfat file systems, which does not support Unix-style permissions managed by chmod command. In this case, in order to change file permissions for files within /boot/efi it is necessary to update the mount options in /etc/fstab file and reboot the system.

Rule Set the UEFI Boot Loader Password [ref]

# grub2-mkpasswd-pbkdf2

When prompted, enter the password that was selected.

Using the hash from the output, modify the /etc/grub.d/40_custom file with the following content:

set superusers="boot"
password_pbkdf2 boot grub.pbkdf2.sha512.VeryLongString

NOTE: the bootloader superuser account and password MUST differ from the root account and password. Once the superuser password has been added, update the grub.cfg file by running:

grub2-mkconfig -o /boot/grub2/grub2.cfg

Rationale:

Severity:

high

Rule ID: xccdf_org.ssgproject.content_rule_grub2_uefi_password

Identifiers:

CCE-83275-8

References:

cis-csc	11, 12, 14, 15, 16, 18, 3, 5
cobit5	DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06
cui	3.4.5
disa	CCI-000213
hipaa	164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii)
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7
iso27001-2013	A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a)
nist-csf	PR.AC-4, PR.AC-6, PR.PT-3
ospp	FIA_UAU.1
os-srg	SRG-OS-000080-GPOS-00048
stigid	SLES-15-010200
cis	1.5.1
anssi	R5
stigref	SV-234820r622137_rule

Group Configure Syslog Group contains 4 groups and 13 rules

[ref] The syslog service has been the default Unix logging mechanism for many years. It has a number of downsides, including inconsistent log format, lack of authentication for received messages, and lack of authentication, encryption, or reliable transport for messages sent over a network. However, due to its long history, syslog is a de facto standard which is supported by almost all Unix applications.

In SUSE Linux Enterprise 15, rsyslog has replaced ksyslogd as the syslog daemon of choice, and it includes some additional security features such as reliable, connection-oriented (i.e. TCP) transmission of logs, the option to log to database formats, and the encryption of log data en route to a central logging server. This section discusses how to configure rsyslog for best effect, and how to use tools provided with the system to maintain and monitor logs.

Group Ensure Proper Configuration of Log Files Group contains 4 rules

[ref] The file /etc/rsyslog.conf controls where log message are written. These are controlled by lines called rules, which consist of a selector and an action. These rules are often customized depending on the role of the system, the requirements of the environment, and whatever may enable the administrator to most effectively make use of log data. The default rules in SUSE Linux Enterprise 15 are:

*.info;mail.none;authpriv.none;cron.none                /var/log/messages
authpriv.*                                              /var/log/secure
mail.*                                                  -/var/log/maillog
cron.*                                                  /var/log/cron
*.emerg                                                 *
uucp,news.crit                                          /var/log/spooler
local7.*                                                /var/log/boot.log

See the man page rsyslog.conf(5) for more information. Note that the rsyslog daemon can be configured to use a timestamp format that some log processing programs may not understand. If this occurs, edit the file /etc/rsyslog.conf and add or edit the following line:

$ ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat

Rule Ensure Log Files Are Owned By Appropriate Group [ref]

The group-owner of all log files written by rsyslog should be root. These log files are determined by the second part of each Rule line in /etc/rsyslog.conf and typically all appear in /var/log. For each log file LOGFILE referenced in /etc/rsyslog.conf, run the following command to inspect the file's group owner:

$ ls -l LOGFILE

If the owner is not root, run the following command to correct this:

$ sudo chgrp root LOGFILE

Rationale:

The log files generated by rsyslog contain valuable information regarding system configuration, user authentication, and other such information. Log files should be protected from unauthorized access.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_rsyslog_files_groupownership

Identifiers:

CCE-85838-1

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
disa	CCI-001314
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
ism	0988, 1405
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
pcidss	Req-10.5.1, Req-10.5.2
cis	4.2.1.3
anssi	R71
pcidss4	10.3.2

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	false
Strategy:	configure

- name: Ensure Log Files Are Owned By Appropriate Group - Set rsyslog logfile configuration
    facts
  ansible.builtin.set_fact:
    rsyslog_etc_config: /etc/rsyslog.conf
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85838-1
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - Get IncludeConfig directive
  ansible.builtin.shell: |
    set -o pipefail
    grep -e '$IncludeConfig' {{ rsyslog_etc_config }} | cut -d ' ' -f 2 || true
  register: rsyslog_old_inc
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85838-1
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - Get include files directives
  ansible.builtin.shell: |
    set -o pipefail
    awk '/)/{f=0} /include\(/{f=1} f{ nf=gensub("^(include\\(|\\s*)file=\"(\\S+)\".*","\\2",1); if($0!=nf){ print nf }}' {{ rsyslog_etc_config }} || true
  register: rsyslog_new_inc
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85838-1
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - Aggregate rsyslog includes
  ansible.builtin.set_fact:
    include_config_output: '{{ rsyslog_old_inc.stdout_lines + rsyslog_new_inc.stdout_lines
      }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_old_inc is not skipped and rsyslog_new_inc is not skipped
  tags:
  - CCE-85838-1
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - List all config files
  ansible.builtin.find:
    paths: '{{ item | dirname }}'
    patterns: '{{ item | basename }}'
    hidden: false
    follow: true
  loop: '{{ include_config_output | list + [rsyslog_etc_config] }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - include_config_output is defined
  register: rsyslog_config_files
  failed_when: false
  changed_when: false
  tags:
  - CCE-85838-1
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - Extract log files old format
  ansible.builtin.shell: |
    set -o pipefail
    grep -oP '^[^(\s|#|\$)]+[\s]+.*[\s]+-?(/+[^:;\s]+);*\.*$' {{ item.1.path }} | \
    awk '{print $NF}' | \
    sed -e 's/^-//' || true
  loop: '{{ rsyslog_config_files.results | default([]) | subelements(''files'') }}'
  register: log_files_old
  changed_when: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_config_files is not skipped
  tags:
  - CCE-85838-1
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - Extract log files new format
  ansible.builtin.shell: |
    set -o pipefail
    grep -ozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" {{ item.1.path }} | \
    grep -aoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)" | \
    grep -oE "\"([/[:alnum:][:punct:]]*)\"" | \
    tr -d "\""|| true
  loop: '{{ rsyslog_config_files.results | default([]) | subelements(''files'') }}'
  register: log_files_new
  changed_when: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_config_files is not skipped
  tags:
  - CCE-85838-1
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group - Sum all log files found
  ansible.builtin.set_fact:
    log_files: '{{ log_files_new.results | map(attribute=''stdout_lines'') | list
      | flatten | unique + log_files_old.results | map(attribute=''stdout_lines'')
      | list | flatten | unique }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85838-1
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

- name: Ensure Log Files Are Owned By Appropriate Group -Setup log files attribute
  ansible.builtin.file:
    path: '{{ item }}'
    group: root
    state: file
  loop: '{{ log_files | list | flatten | unique }}'
  failed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85838-1
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_groupownership

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# List of log file paths to be inspected for correct permissions
# * Primarily inspect log file paths listed in /etc/rsyslog.conf
RSYSLOG_ETC_CONFIG="/etc/rsyslog.conf"
# * And also the log file paths listed after rsyslog's $IncludeConfig directive
#   (store the result into array for the case there's shell glob used as value of IncludeConfig)
readarray -t OLD_INC < <(grep -e "\$IncludeConfig[[:space:]]\+[^[:space:];]\+" /etc/rsyslog.conf | cut -d ' ' -f 2)
readarray -t RSYSLOG_INCLUDE_CONFIG < <(for INCPATH in "${OLD_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)
readarray -t NEW_INC < <(sed -n '/^\s*include(/,/)/Ip' /etc/rsyslog.conf | sed -n 's@.*file\s*=\s*"\([/[:alnum:][:punct:]]*\)".*@\1@Ip')
readarray -t RSYSLOG_INCLUDE < <(for INCPATH in "${NEW_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)

# Declare an array to hold the final list of different log file paths
declare -a LOG_FILE_PATHS

# Array to hold all rsyslog config entries
RSYSLOG_CONFIGS=()
RSYSLOG_CONFIGS=("${RSYSLOG_ETC_CONFIG}" "${RSYSLOG_INCLUDE_CONFIG[@]}" "${RSYSLOG_INCLUDE[@]}")

# Get full list of files to be checked
# RSYSLOG_CONFIGS may contain globs such as
# /etc/rsyslog.d/*.conf /etc/rsyslog.d/*.frule
# So, loop over the entries in RSYSLOG_CONFIGS and use find to get the list of included files.
RSYSLOG_CONFIG_FILES=()
for ENTRY in "${RSYSLOG_CONFIGS[@]}"
do
	# If directory, rsyslog will search for config files in recursively.
	# However, files in hidden sub-directories or hidden files will be ignored.
	if [ -d "${ENTRY}" ]
	then
		readarray -t FINDOUT < <(find "${ENTRY}" -not -path '*/.*' -type f)
		RSYSLOG_CONFIG_FILES+=("${FINDOUT[@]}")
	elif [ -f "${ENTRY}" ]
	then
		RSYSLOG_CONFIG_FILES+=("${ENTRY}")
	else
		echo "Invalid include object: ${ENTRY}"
	fi
done

# Browse each file selected above as containing paths of log files
# ('/etc/rsyslog.conf' and '/etc/rsyslog.d/*.conf' in the default configuration)
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	# From each of these files extract just particular log file path(s), thus:
	# * Ignore lines starting with space (' '), comment ('#"), or variable syntax ('$') characters,
	# * Ignore empty lines,
	# * Strip quotes and closing brackets from paths.
	# * Ignore paths that match /dev|/etc.*\.conf, as those are paths, but likely not log files
	# * From the remaining valid rows select only fields constituting a log file path
	# Text file column is understood to represent a log file path if and only if all of the
	# following are met:
	# * it contains at least one slash '/' character,
	# * it is preceded by space
	# * it doesn't contain space (' '), colon (':'), and semicolon (';') characters
	# Search log file for path(s) only in case it exists!
	if [[ -f "${LOG_FILE}" ]]
	then
		NORMALIZED_CONFIG_FILE_LINES=$(sed -e "/^[#|$]/d" "${LOG_FILE}")
		LINES_WITH_PATHS=$(grep '[^/]*\s\+\S*/\S\+$' <<< "${NORMALIZED_CONFIG_FILE_LINES}")
		FILTERED_PATHS=$(awk '{if(NF>=2&&($NF~/^\//||$NF~/^-\//)){sub(/^-\//,"/",$NF);print $NF}}' <<< "${LINES_WITH_PATHS}")
		CLEANED_PATHS=$(sed -e "s/[\"')]//g; /\\/etc.*\.conf/d; /\\/dev\\//d" <<< "${FILTERED_PATHS}")
		MATCHED_ITEMS=$(sed -e "/^$/d" <<< "${CLEANED_PATHS}")
		# Since above sed command might return more than one item (delimited by newline), split
		# the particular matches entries into new array specific for this log file
		readarray -t ARRAY_FOR_LOG_FILE <<< "$MATCHED_ITEMS"
		# Concatenate the two arrays - previous content of $LOG_FILE_PATHS array with
		# items from newly created array for this log file
		LOG_FILE_PATHS+=("${ARRAY_FOR_LOG_FILE[@]}")
		# Delete the temporary array
		unset ARRAY_FOR_LOG_FILE
	fi
done

# Check for RainerScript action log format which might be also multiline so grep regex is a bit
# curly:
# extract possibly multiline action omfile expressions
# extract File="logfile" expression
# match only "logfile" expression
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	ACTION_OMFILE_LINES=$(grep -iozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" "${LOG_FILE}")
	OMFILE_LINES=$(echo "${ACTION_OMFILE_LINES}"| grep -iaoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)")
	LOG_FILE_PATHS+=("$(echo "${OMFILE_LINES}"| grep -oE "\"([/[:alnum:][:punct:]]*)\""|tr -d "\"")")
done

# Ensure the correct attribute if file exists
FILE_CMD="chgrp"
for LOG_FILE_PATH in "${LOG_FILE_PATHS[@]}"
do
	# Sanity check - if particular $LOG_FILE_PATH is empty string, skip it from further processing
	if [ -z "$LOG_FILE_PATH" ]
	then
		continue
	fi
	$FILE_CMD "root" "$LOG_FILE_PATH"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure Log Files Are Owned By Appropriate User [ref]

The owner of all log files written by rsyslog should be root. These log files are determined by the second part of each Rule line in /etc/rsyslog.conf and typically all appear in /var/log. For each log file LOGFILE referenced in /etc/rsyslog.conf, run the following command to inspect the file's owner:

$ ls -l LOGFILE

If the owner is not root, run the following command to correct this:

$ sudo chown root LOGFILE

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_rsyslog_files_ownership

Identifiers:

CCE-85839-9

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
disa	CCI-001314
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
ism	0988, 1405
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
pcidss	Req-10.5.1, Req-10.5.2
cis	4.2.1.3
anssi	R71
pcidss4	10.3.2

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	false
Strategy:	configure

- name: Ensure Log Files Are Owned By Appropriate User - Set rsyslog logfile configuration
    facts
  ansible.builtin.set_fact:
    rsyslog_etc_config: /etc/rsyslog.conf
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85839-9
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - Get IncludeConfig directive
  ansible.builtin.shell: |
    set -o pipefail
    grep -e '$IncludeConfig' {{ rsyslog_etc_config }} | cut -d ' ' -f 2 || true
  register: rsyslog_old_inc
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85839-9
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - Get include files directives
  ansible.builtin.shell: |
    set -o pipefail
    awk '/)/{f=0} /include\(/{f=1} f{ nf=gensub("^(include\\(|\\s*)file=\"(\\S+)\".*","\\2",1); if($0!=nf){ print nf }}' {{ rsyslog_etc_config }} || true
  register: rsyslog_new_inc
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85839-9
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - Aggregate rsyslog includes
  ansible.builtin.set_fact:
    include_config_output: '{{ rsyslog_old_inc.stdout_lines + rsyslog_new_inc.stdout_lines
      }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_old_inc is not skipped and rsyslog_new_inc is not skipped
  tags:
  - CCE-85839-9
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - List all config files
  ansible.builtin.find:
    paths: '{{ item | dirname }}'
    patterns: '{{ item | basename }}'
    hidden: false
    follow: true
  loop: '{{ include_config_output | list + [rsyslog_etc_config] }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - include_config_output is defined
  register: rsyslog_config_files
  failed_when: false
  changed_when: false
  tags:
  - CCE-85839-9
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - Extract log files old format
  ansible.builtin.shell: |
    set -o pipefail
    grep -oP '^[^(\s|#|\$)]+[\s]+.*[\s]+-?(/+[^:;\s]+);*\.*$' {{ item.1.path }} | \
    awk '{print $NF}' | \
    sed -e 's/^-//' || true
  loop: '{{ rsyslog_config_files.results | default([]) | subelements(''files'') }}'
  register: log_files_old
  changed_when: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_config_files is not skipped
  tags:
  - CCE-85839-9
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - Extract log files new format
  ansible.builtin.shell: |
    set -o pipefail
    grep -ozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" {{ item.1.path }} | \
    grep -aoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)" | \
    grep -oE "\"([/[:alnum:][:punct:]]*)\"" | \
    tr -d "\""|| true
  loop: '{{ rsyslog_config_files.results | default([]) | subelements(''files'') }}'
  register: log_files_new
  changed_when: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_config_files is not skipped
  tags:
  - CCE-85839-9
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User - Sum all log files found
  ansible.builtin.set_fact:
    log_files: '{{ log_files_new.results | map(attribute=''stdout_lines'') | list
      | flatten | unique + log_files_old.results | map(attribute=''stdout_lines'')
      | list | flatten | unique }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85839-9
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

- name: Ensure Log Files Are Owned By Appropriate User -Setup log files attribute
  ansible.builtin.file:
    path: '{{ item }}'
    owner: root
    state: file
  loop: '{{ log_files | list | flatten | unique }}'
  failed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85839-9
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_ownership

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# List of log file paths to be inspected for correct permissions
# * Primarily inspect log file paths listed in /etc/rsyslog.conf
RSYSLOG_ETC_CONFIG="/etc/rsyslog.conf"
# * And also the log file paths listed after rsyslog's $IncludeConfig directive
#   (store the result into array for the case there's shell glob used as value of IncludeConfig)
readarray -t OLD_INC < <(grep -e "\$IncludeConfig[[:space:]]\+[^[:space:];]\+" /etc/rsyslog.conf | cut -d ' ' -f 2)
readarray -t RSYSLOG_INCLUDE_CONFIG < <(for INCPATH in "${OLD_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)
readarray -t NEW_INC < <(sed -n '/^\s*include(/,/)/Ip' /etc/rsyslog.conf | sed -n 's@.*file\s*=\s*"\([/[:alnum:][:punct:]]*\)".*@\1@Ip')
readarray -t RSYSLOG_INCLUDE < <(for INCPATH in "${NEW_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)

# Declare an array to hold the final list of different log file paths
declare -a LOG_FILE_PATHS

# Array to hold all rsyslog config entries
RSYSLOG_CONFIGS=()
RSYSLOG_CONFIGS=("${RSYSLOG_ETC_CONFIG}" "${RSYSLOG_INCLUDE_CONFIG[@]}" "${RSYSLOG_INCLUDE[@]}")

# Get full list of files to be checked
# RSYSLOG_CONFIGS may contain globs such as
# /etc/rsyslog.d/*.conf /etc/rsyslog.d/*.frule
# So, loop over the entries in RSYSLOG_CONFIGS and use find to get the list of included files.
RSYSLOG_CONFIG_FILES=()
for ENTRY in "${RSYSLOG_CONFIGS[@]}"
do
	# If directory, rsyslog will search for config files in recursively.
	# However, files in hidden sub-directories or hidden files will be ignored.
	if [ -d "${ENTRY}" ]
	then
		readarray -t FINDOUT < <(find "${ENTRY}" -not -path '*/.*' -type f)
		RSYSLOG_CONFIG_FILES+=("${FINDOUT[@]}")
	elif [ -f "${ENTRY}" ]
	then
		RSYSLOG_CONFIG_FILES+=("${ENTRY}")
	else
		echo "Invalid include object: ${ENTRY}"
	fi
done

# Browse each file selected above as containing paths of log files
# ('/etc/rsyslog.conf' and '/etc/rsyslog.d/*.conf' in the default configuration)
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	# From each of these files extract just particular log file path(s), thus:
	# * Ignore lines starting with space (' '), comment ('#"), or variable syntax ('$') characters,
	# * Ignore empty lines,
	# * Strip quotes and closing brackets from paths.
	# * Ignore paths that match /dev|/etc.*\.conf, as those are paths, but likely not log files
	# * From the remaining valid rows select only fields constituting a log file path
	# Text file column is understood to represent a log file path if and only if all of the
	# following are met:
	# * it contains at least one slash '/' character,
	# * it is preceded by space
	# * it doesn't contain space (' '), colon (':'), and semicolon (';') characters
	# Search log file for path(s) only in case it exists!
	if [[ -f "${LOG_FILE}" ]]
	then
		NORMALIZED_CONFIG_FILE_LINES=$(sed -e "/^[#|$]/d" "${LOG_FILE}")
		LINES_WITH_PATHS=$(grep '[^/]*\s\+\S*/\S\+$' <<< "${NORMALIZED_CONFIG_FILE_LINES}")
		FILTERED_PATHS=$(awk '{if(NF>=2&&($NF~/^\//||$NF~/^-\//)){sub(/^-\//,"/",$NF);print $NF}}' <<< "${LINES_WITH_PATHS}")
		CLEANED_PATHS=$(sed -e "s/[\"')]//g; /\\/etc.*\.conf/d; /\\/dev\\//d" <<< "${FILTERED_PATHS}")
		MATCHED_ITEMS=$(sed -e "/^$/d" <<< "${CLEANED_PATHS}")
		# Since above sed command might return more than one item (delimited by newline), split
		# the particular matches entries into new array specific for this log file
		readarray -t ARRAY_FOR_LOG_FILE <<< "$MATCHED_ITEMS"
		# Concatenate the two arrays - previous content of $LOG_FILE_PATHS array with
		# items from newly created array for this log file
		LOG_FILE_PATHS+=("${ARRAY_FOR_LOG_FILE[@]}")
		# Delete the temporary array
		unset ARRAY_FOR_LOG_FILE
	fi
done

# Check for RainerScript action log format which might be also multiline so grep regex is a bit
# curly:
# extract possibly multiline action omfile expressions
# extract File="logfile" expression
# match only "logfile" expression
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	ACTION_OMFILE_LINES=$(grep -iozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" "${LOG_FILE}")
	OMFILE_LINES=$(echo "${ACTION_OMFILE_LINES}"| grep -iaoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)")
	LOG_FILE_PATHS+=("$(echo "${OMFILE_LINES}"| grep -oE "\"([/[:alnum:][:punct:]]*)\""|tr -d "\"")")
done

# Ensure the correct attribute if file exists
FILE_CMD="chown"
for LOG_FILE_PATH in "${LOG_FILE_PATHS[@]}"
do
	# Sanity check - if particular $LOG_FILE_PATH is empty string, skip it from further processing
	if [ -z "$LOG_FILE_PATH" ]
	then
		continue
	fi
	$FILE_CMD "root" "$LOG_FILE_PATH"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure System Log Files Have Correct Permissions [ref]

The file permissions for all log files written by rsyslog should be set to 640, or more restrictive. These log files are determined by the second part of each Rule line in /etc/rsyslog.conf and typically all appear in /var/log. For each log file LOGFILE referenced in /etc/rsyslog.conf, run the following command to inspect the file's permissions:

$ ls -l LOGFILE

If the permissions are not 640 or more restrictive, run the following command to correct this:

$ sudo chmod 640 LOGFILE

Rationale:

Log files can contain valuable information regarding system configuration. If the system log files are not protected unauthorized users could change the logged data, eliminating their forensic value.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_rsyslog_files_permissions

Identifiers:

CCE-85837-3

References:

disa	CCI-001314
ism	0988, 1405
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-6(a), AC-6(1)
pcidss	Req-10.5.1, Req-10.5.2
cis	4.2.1.3
anssi	R71
pcidss4	10.3.1

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	false
Strategy:	configure

- name: Ensure System Log Files Have Correct Permissions - Set rsyslog logfile configuration
    facts
  ansible.builtin.set_fact:
    rsyslog_etc_config: /etc/rsyslog.conf
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85837-3
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - Get IncludeConfig directive
  ansible.builtin.shell: |
    set -o pipefail
    grep -e '$IncludeConfig' {{ rsyslog_etc_config }} | cut -d ' ' -f 2 || true
  register: rsyslog_old_inc
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85837-3
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - Get include files directives
  ansible.builtin.shell: |
    set -o pipefail
    awk '/)/{f=0} /include\(/{f=1} f{ nf=gensub("^(include\\(|\\s*)file=\"(\\S+)\".*","\\2",1); if($0!=nf){ print nf }}' {{ rsyslog_etc_config }} || true
  register: rsyslog_new_inc
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85837-3
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - Aggregate rsyslog includes
  ansible.builtin.set_fact:
    include_config_output: '{{ rsyslog_old_inc.stdout_lines + rsyslog_new_inc.stdout_lines
      }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_old_inc is not skipped and rsyslog_new_inc is not skipped
  tags:
  - CCE-85837-3
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - List all config files
  ansible.builtin.find:
    paths: '{{ item | dirname }}'
    patterns: '{{ item | basename }}'
    hidden: false
    follow: true
  loop: '{{ include_config_output | list + [rsyslog_etc_config] }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - include_config_output is defined
  register: rsyslog_config_files
  failed_when: false
  changed_when: false
  tags:
  - CCE-85837-3
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - Extract log files old format
  ansible.builtin.shell: |
    set -o pipefail
    grep -oP '^[^(\s|#|\$)]+[\s]+.*[\s]+-?(/+[^:;\s]+);*\.*$' {{ item.1.path }} | \
    awk '{print $NF}' | \
    sed -e 's/^-//' || true
  loop: '{{ rsyslog_config_files.results | default([]) | subelements(''files'') }}'
  register: log_files_old
  changed_when: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_config_files is not skipped
  tags:
  - CCE-85837-3
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - Extract log files new format
  ansible.builtin.shell: |
    set -o pipefail
    grep -ozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" {{ item.1.path }} | \
    grep -aoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)" | \
    grep -oE "\"([/[:alnum:][:punct:]]*)\"" | \
    tr -d "\""|| true
  loop: '{{ rsyslog_config_files.results | default([]) | subelements(''files'') }}'
  register: log_files_new
  changed_when: false
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_config_files is not skipped
  tags:
  - CCE-85837-3
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions - Sum all log files found
  ansible.builtin.set_fact:
    log_files: '{{ log_files_new.results | map(attribute=''stdout_lines'') | list
      | flatten | unique + log_files_old.results | map(attribute=''stdout_lines'')
      | list | flatten | unique }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85837-3
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

- name: Ensure System Log Files Have Correct Permissions -Setup log files attribute
  ansible.builtin.file:
    path: '{{ item }}'
    mode: '0640'
    state: file
  loop: '{{ log_files | list | flatten | unique }}'
  failed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85837-3
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.1
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_files_permissions

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# List of log file paths to be inspected for correct permissions
# * Primarily inspect log file paths listed in /etc/rsyslog.conf
RSYSLOG_ETC_CONFIG="/etc/rsyslog.conf"
# * And also the log file paths listed after rsyslog's $IncludeConfig directive
#   (store the result into array for the case there's shell glob used as value of IncludeConfig)
readarray -t OLD_INC < <(grep -e "\$IncludeConfig[[:space:]]\+[^[:space:];]\+" /etc/rsyslog.conf | cut -d ' ' -f 2)
readarray -t RSYSLOG_INCLUDE_CONFIG < <(for INCPATH in "${OLD_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)
readarray -t NEW_INC < <(sed -n '/^\s*include(/,/)/Ip' /etc/rsyslog.conf | sed -n 's@.*file\s*=\s*"\([/[:alnum:][:punct:]]*\)".*@\1@Ip')
readarray -t RSYSLOG_INCLUDE < <(for INCPATH in "${NEW_INC[@]}"; do eval printf '%s\\n' "${INCPATH}"; done)

# Declare an array to hold the final list of different log file paths
declare -a LOG_FILE_PATHS

# Array to hold all rsyslog config entries
RSYSLOG_CONFIGS=()
RSYSLOG_CONFIGS=("${RSYSLOG_ETC_CONFIG}" "${RSYSLOG_INCLUDE_CONFIG[@]}" "${RSYSLOG_INCLUDE[@]}")

# Get full list of files to be checked
# RSYSLOG_CONFIGS may contain globs such as
# /etc/rsyslog.d/*.conf /etc/rsyslog.d/*.frule
# So, loop over the entries in RSYSLOG_CONFIGS and use find to get the list of included files.
RSYSLOG_CONFIG_FILES=()
for ENTRY in "${RSYSLOG_CONFIGS[@]}"
do
	# If directory, rsyslog will search for config files in recursively.
	# However, files in hidden sub-directories or hidden files will be ignored.
	if [ -d "${ENTRY}" ]
	then
		readarray -t FINDOUT < <(find "${ENTRY}" -not -path '*/.*' -type f)
		RSYSLOG_CONFIG_FILES+=("${FINDOUT[@]}")
	elif [ -f "${ENTRY}" ]
	then
		RSYSLOG_CONFIG_FILES+=("${ENTRY}")
	else
		echo "Invalid include object: ${ENTRY}"
	fi
done

# Browse each file selected above as containing paths of log files
# ('/etc/rsyslog.conf' and '/etc/rsyslog.d/*.conf' in the default configuration)
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	# From each of these files extract just particular log file path(s), thus:
	# * Ignore lines starting with space (' '), comment ('#"), or variable syntax ('$') characters,
	# * Ignore empty lines,
	# * Strip quotes and closing brackets from paths.
	# * Ignore paths that match /dev|/etc.*\.conf, as those are paths, but likely not log files
	# * From the remaining valid rows select only fields constituting a log file path
	# Text file column is understood to represent a log file path if and only if all of the
	# following are met:
	# * it contains at least one slash '/' character,
	# * it is preceded by space
	# * it doesn't contain space (' '), colon (':'), and semicolon (';') characters
	# Search log file for path(s) only in case it exists!
	if [[ -f "${LOG_FILE}" ]]
	then
		NORMALIZED_CONFIG_FILE_LINES=$(sed -e "/^[#|$]/d" "${LOG_FILE}")
		LINES_WITH_PATHS=$(grep '[^/]*\s\+\S*/\S\+$' <<< "${NORMALIZED_CONFIG_FILE_LINES}")
		FILTERED_PATHS=$(awk '{if(NF>=2&&($NF~/^\//||$NF~/^-\//)){sub(/^-\//,"/",$NF);print $NF}}' <<< "${LINES_WITH_PATHS}")
		CLEANED_PATHS=$(sed -e "s/[\"')]//g; /\\/etc.*\.conf/d; /\\/dev\\//d" <<< "${FILTERED_PATHS}")
		MATCHED_ITEMS=$(sed -e "/^$/d" <<< "${CLEANED_PATHS}")
		# Since above sed command might return more than one item (delimited by newline), split
		# the particular matches entries into new array specific for this log file
		readarray -t ARRAY_FOR_LOG_FILE <<< "$MATCHED_ITEMS"
		# Concatenate the two arrays - previous content of $LOG_FILE_PATHS array with
		# items from newly created array for this log file
		LOG_FILE_PATHS+=("${ARRAY_FOR_LOG_FILE[@]}")
		# Delete the temporary array
		unset ARRAY_FOR_LOG_FILE
	fi
done

# Check for RainerScript action log format which might be also multiline so grep regex is a bit
# curly:
# extract possibly multiline action omfile expressions
# extract File="logfile" expression
# match only "logfile" expression
for LOG_FILE in "${RSYSLOG_CONFIG_FILES[@]}"
do
	ACTION_OMFILE_LINES=$(grep -iozP "action\s*\(\s*type\s*=\s*\"omfile\"[^\)]*\)" "${LOG_FILE}")
	OMFILE_LINES=$(echo "${ACTION_OMFILE_LINES}"| grep -iaoP "\bFile\s*=\s*\"([/[:alnum:][:punct:]]*)\"\s*\)")
	LOG_FILE_PATHS+=("$(echo "${OMFILE_LINES}"| grep -oE "\"([/[:alnum:][:punct:]]*)\""|tr -d "\"")")
done

# Ensure the correct attribute if file exists
FILE_CMD="chmod"
for LOG_FILE_PATH in "${LOG_FILE_PATHS[@]}"
do
	# Sanity check - if particular $LOG_FILE_PATH is empty string, skip it from further processing
	if [ -z "$LOG_FILE_PATH" ]
	then
		continue
	fi
	$FILE_CMD "0640" "$LOG_FILE_PATH"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure logging is configured [ref]

The /etc/rsyslog.conf and /etc/rsyslog.d/*.conf files specifies rules for logging and which files are to be used to log certain classes of messages.

Warning: This rule does not come with remediation as there is no one way to solve the problem, and the requirement from CIS specification does not require one particular way, but persuades the system administrator to perform configuration suitable for the specific environment. This also means that the OVAL check is too generic, and the user most probably should perform additional manual verification.

Rationale:

A great deal of important security-related information is sent via rsyslog (e.g., successful and failed su attempts, failed login attempts, root login attempts, etc.).

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_rsyslog_logging_configured

Identifiers:

CCE-92497-7

References:

cis	4.2.1.4

Group systemd-journald Group contains 3 rules

[ref] systemd-journald is a system service that collects and stores logging data. It creates and maintains structured, indexed journals based on logging information that is received from a variety of sources. For more information on systemd-journald and additional systemd-journald configuration options, see https://systemd.io/.

Rule Ensure journald is configured to compress large log files [ref]

The journald system can compress large log files to avoid fill the system disk.

Rationale:

Log files that are not properly compressed run the risk of growing so large that they fill up the log partition. Valuable logging information could be lost if the log partition becomes full.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_journald_compress

Identifiers:

CCE-91377-2

References:

cis	4.2.2.2

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Check for duplicate Compress values in master journald configuration
  ansible.builtin.lineinfile:
    path: /etc/systemd/journald.conf
    create: false
    regexp: ^\s*Compress=
    state: absent
  check_mode: true
  changed_when: false
  register: dupes_master
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91377-2
  - journald_compress
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Deduplicate Compress values from journald master configuration
  ansible.builtin.lineinfile:
    path: /etc/systemd/journald.conf
    create: false
    regexp: ^\s*Compress=
    state: absent
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - dupes_master.found is defined and dupes_master.found > 1
  tags:
  - CCE-91377-2
  - journald_compress
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Collect all config journald files which configure Compress
  ansible.builtin.find:
    paths: /etc/systemd/journal.d
    contains: ^[\s]*Compress=.*$
    patterns: '*.conf'
  register: journald_Compress_dropin_config_files
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91377-2
  - journald_compress
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Deduplicate values from journald Compress dropin configuration
  ansible.builtin.lineinfile:
    path: '{{ item.path }}'
    create: false
    regexp: ^\s*Compress=
    state: absent
  loop: '{{  journald_Compress_dropin_config_files.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91377-2
  - journald_compress
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Insert correct line to journald Compress configuration
  ansible.builtin.lineinfile:
    path: /etc/systemd/journal.d/oscap-remedy.conf
    create: true
    regexp: ^\s*Compress=
    line: Compress=yes
    state: present
    insertbefore: ^# Compress
    validate: bash -n %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91377-2
  - journald_compress
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

function remove_journald_Compress_configuration {
    local COMPONENT_PARAM_CONFIG
    mapfile -t COMPONENT_PARAM_CONFIG < <(ls /etc/systemd/journal.d/*.conf)
    COMPONENT_PARAM_CONFIG+=("/etc/systemd/journald.conf")

    for f in "${COMPONENT_PARAM_CONFIG[@]}"
    do
        sed -i "/^\s*Compress\s*=\s*/d" "$f"
        # make sure file has newline at the end
        sed -i -e '$a\' "$f"
    done
    sed -i -e '$a\' "/etc/systemd/journald.conf"
}

function journald_Compress_add_configuration {
    local COMPONENT_PARAM_REMEDY_CFG
    mkdir -p "/etc/systemd/journal.d"
    COMPONENT_PARAM_REMEDY_CFG="/etc/systemd/journal.d/oscap-remedy.conf"

    if [ ! -f "${COMPONENT_PARAM_REMEDY_CFG}" ] ; then
        touch "${COMPONENT_PARAM_REMEDY_CFG}"
    fi
    cp "${COMPONENT_PARAM_REMEDY_CFG}" "${COMPONENT_PARAM_REMEDY_CFG}.bak"
    # Insert before the line matching the regex '^#\s*Compress'.
    line_number="$(LC_ALL=C grep -n "^#\s*Compress" "${COMPONENT_PARAM_REMEDY_CFG}.bak" | LC_ALL=C sed 's/:.*//g')"
    if [ -z "$line_number" ]; then
       # There was no match of '^#\s*Compress', insert at
       # the end of the file.
       printf '%s\n' "Compress=yes" >> "${COMPONENT_PARAM_REMEDY_CFG}"
    else
        head -n "$(( line_number - 1 ))" "${COMPONENT_PARAM_REMEDY_CFG}.bak" > "${COMPONENT_PARAM_REMEDY_CFG}"
        printf '%s\n' "Compress=yes" >> "/etc/systemd/journald.conf"
        tail -n "+$(( line_number ))" "${COMPONENT_PARAM_REMEDY_CFG}.bak" >> "${COMPONENT_PARAM_REMEDY_CFG}"
    fi
    # Clean up after ourselves.
    rm "${COMPONENT_PARAM_REMEDY_CFG}.bak"
}

remove_journald_Compress_configuration
journald_Compress_add_configuration

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure journald is configured to send logs to rsyslog [ref]

Data from journald may be stored in volatile memory or persisted locally. Utilities exist to accept remote export of journald logs.

Rationale:

Storing log data on a remote host protects log integrity from local attacks. If an attacker gains root access on the local system, they could tamper with or remove log data that is stored on the local system.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_journald_forward_to_syslog

Identifiers:

CCE-91376-4

References:

cis	4.2.2.1

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Check for duplicate ForwardToSyslog values in master journald configuration
  ansible.builtin.lineinfile:
    path: /etc/systemd/journald.conf
    create: false
    regexp: ^\s*ForwardToSyslog=
    state: absent
  check_mode: true
  changed_when: false
  register: dupes_master
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91376-4
  - journald_forward_to_syslog
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Deduplicate ForwardToSyslog values from journald master configuration
  ansible.builtin.lineinfile:
    path: /etc/systemd/journald.conf
    create: false
    regexp: ^\s*ForwardToSyslog=
    state: absent
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - dupes_master.found is defined and dupes_master.found > 1
  tags:
  - CCE-91376-4
  - journald_forward_to_syslog
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Collect all config journald files which configure ForwardToSyslog
  ansible.builtin.find:
    paths: /etc/systemd/journal.d
    contains: ^[\s]*ForwardToSyslog=.*$
    patterns: '*.conf'
  register: journald_ForwardToSyslog_dropin_config_files
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91376-4
  - journald_forward_to_syslog
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Deduplicate values from journald ForwardToSyslog dropin configuration
  ansible.builtin.lineinfile:
    path: '{{ item.path }}'
    create: false
    regexp: ^\s*ForwardToSyslog=
    state: absent
  loop: '{{  journald_ForwardToSyslog_dropin_config_files.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91376-4
  - journald_forward_to_syslog
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Insert correct line to journald ForwardToSyslog configuration
  ansible.builtin.lineinfile:
    path: /etc/systemd/journal.d/oscap-remedy.conf
    create: true
    regexp: ^\s*ForwardToSyslog=
    line: ForwardToSyslog=yes
    state: present
    insertbefore: ^# ForwardToSyslog
    validate: bash -n %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91376-4
  - journald_forward_to_syslog
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

function remove_journald_ForwardToSyslog_configuration {
    local COMPONENT_PARAM_CONFIG
    mapfile -t COMPONENT_PARAM_CONFIG < <(ls /etc/systemd/journal.d/*.conf)
    COMPONENT_PARAM_CONFIG+=("/etc/systemd/journald.conf")

    for f in "${COMPONENT_PARAM_CONFIG[@]}"
    do
        sed -i "/^\s*ForwardToSyslog\s*=\s*/d" "$f"
        # make sure file has newline at the end
        sed -i -e '$a\' "$f"
    done
    sed -i -e '$a\' "/etc/systemd/journald.conf"
}

function journald_ForwardToSyslog_add_configuration {
    local COMPONENT_PARAM_REMEDY_CFG
    mkdir -p "/etc/systemd/journal.d"
    COMPONENT_PARAM_REMEDY_CFG="/etc/systemd/journal.d/oscap-remedy.conf"

    if [ ! -f "${COMPONENT_PARAM_REMEDY_CFG}" ] ; then
        touch "${COMPONENT_PARAM_REMEDY_CFG}"
    fi
    cp "${COMPONENT_PARAM_REMEDY_CFG}" "${COMPONENT_PARAM_REMEDY_CFG}.bak"
    # Insert before the line matching the regex '^#\s*Compress'.
    line_number="$(LC_ALL=C grep -n "^#\s*ForwardToSyslog" "${COMPONENT_PARAM_REMEDY_CFG}.bak" | LC_ALL=C sed 's/:.*//g')"
    if [ -z "$line_number" ]; then
       # There was no match of '^#\s*ForwardToSyslog', insert at
       # the end of the file.
       printf '%s\n' "ForwardToSyslog=yes" >> "${COMPONENT_PARAM_REMEDY_CFG}"
    else
        head -n "$(( line_number - 1 ))" "${COMPONENT_PARAM_REMEDY_CFG}.bak" > "${COMPONENT_PARAM_REMEDY_CFG}"
        printf '%s\n' "ForwardToSyslog=yes" >> "/etc/systemd/journald.conf"
        tail -n "+$(( line_number ))" "${COMPONENT_PARAM_REMEDY_CFG}.bak" >> "${COMPONENT_PARAM_REMEDY_CFG}"
    fi
    # Clean up after ourselves.
    rm "${COMPONENT_PARAM_REMEDY_CFG}.bak"
}

remove_journald_ForwardToSyslog_configuration
journald_ForwardToSyslog_add_configuration

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure journald is configured to write log files to persistent disk [ref]

The journald system may store log files in volatile memory or locally on disk. If the logs are only stored in volatile memory they will we lost upon reboot.

Rationale:

Log files contain valuable data and need to be persistent to aid in possible investigations.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_journald_storage

Identifiers:

CCE-91378-0

References:

cis	4.2.2.3

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Check for duplicate Storage values in master journald configuration
  ansible.builtin.lineinfile:
    path: /etc/systemd/journald.conf
    create: false
    regexp: ^\s*Storage=
    state: absent
  check_mode: true
  changed_when: false
  register: dupes_master
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91378-0
  - journald_storage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Deduplicate Storage values from journald master configuration
  ansible.builtin.lineinfile:
    path: /etc/systemd/journald.conf
    create: false
    regexp: ^\s*Storage=
    state: absent
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - dupes_master.found is defined and dupes_master.found > 1
  tags:
  - CCE-91378-0
  - journald_storage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Collect all config journald files which configure Storage
  ansible.builtin.find:
    paths: /etc/systemd/journal.d
    contains: ^[\s]*Storage=.*$
    patterns: '*.conf'
  register: journald_Storage_dropin_config_files
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91378-0
  - journald_storage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Deduplicate values from journald Storage dropin configuration
  ansible.builtin.lineinfile:
    path: '{{ item.path }}'
    create: false
    regexp: ^\s*Storage=
    state: absent
  loop: '{{  journald_Storage_dropin_config_files.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91378-0
  - journald_storage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Insert correct line to journald Storage configuration
  ansible.builtin.lineinfile:
    path: /etc/systemd/journal.d/oscap-remedy.conf
    create: true
    regexp: ^\s*Storage=
    line: Storage=persistent
    state: present
    insertbefore: ^# Storage
    validate: bash -n %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91378-0
  - journald_storage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

function remove_journald_Storage_configuration {
    local COMPONENT_PARAM_CONFIG
    mapfile -t COMPONENT_PARAM_CONFIG < <(ls /etc/systemd/journal.d/*.conf)
    COMPONENT_PARAM_CONFIG+=("/etc/systemd/journald.conf")

    for f in "${COMPONENT_PARAM_CONFIG[@]}"
    do
        sed -i "/^\s*Storage\s*=\s*/d" "$f"
        # make sure file has newline at the end
        sed -i -e '$a\' "$f"
    done
    sed -i -e '$a\' "/etc/systemd/journald.conf"
}

function journald_Storage_add_configuration {
    local COMPONENT_PARAM_REMEDY_CFG
    mkdir -p "/etc/systemd/journal.d"
    COMPONENT_PARAM_REMEDY_CFG="/etc/systemd/journal.d/oscap-remedy.conf"

    if [ ! -f "${COMPONENT_PARAM_REMEDY_CFG}" ] ; then
        touch "${COMPONENT_PARAM_REMEDY_CFG}"
    fi
    cp "${COMPONENT_PARAM_REMEDY_CFG}" "${COMPONENT_PARAM_REMEDY_CFG}.bak"
    # Insert before the line matching the regex '^#\s*Compress'.
    line_number="$(LC_ALL=C grep -n "^#\s*Storage" "${COMPONENT_PARAM_REMEDY_CFG}.bak" | LC_ALL=C sed 's/:.*//g')"
    if [ -z "$line_number" ]; then
       # There was no match of '^#\s*Storage', insert at
       # the end of the file.
       printf '%s\n' "Storage=persistent" >> "${COMPONENT_PARAM_REMEDY_CFG}"
    else
        head -n "$(( line_number - 1 ))" "${COMPONENT_PARAM_REMEDY_CFG}.bak" > "${COMPONENT_PARAM_REMEDY_CFG}"
        printf '%s\n' "Storage=persistent" >> "/etc/systemd/journald.conf"
        tail -n "+$(( line_number ))" "${COMPONENT_PARAM_REMEDY_CFG}.bak" >> "${COMPONENT_PARAM_REMEDY_CFG}"
    fi
    # Clean up after ourselves.
    rm "${COMPONENT_PARAM_REMEDY_CFG}.bak"
}

remove_journald_Storage_configuration
journald_Storage_add_configuration

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Ensure All Logs are Rotated by logrotate Group contains 3 rules

[ref] Edit the file /etc/logrotate.d/syslog. Find the first line, which should look like this (wrapped for clarity):

/var/log/messages /var/log/secure /var/log/maillog /var/log/spooler \
  /var/log/boot.log /var/log/cron {

Edit this line so that it contains a one-space-separated listing of each log file referenced in /etc/rsyslog.conf.

All logs in use on a system must be rotated regularly, or the log files will consume disk space over time, eventually interfering with system operation. The file /etc/logrotate.d/syslog is the configuration file used by the logrotate program to maintain all log files written by syslog. By default, it rotates logs weekly and stores four archival copies of each log. These settings can be modified by editing /etc/logrotate.conf, but the defaults are sufficient for purposes of this guide.

Note that logrotate is run nightly by the cron job /etc/cron.daily/logrotate. If particularly active logs need to be rotated more often than once a day, some other mechanism must be used.

Rule Ensure logrotate is Installed [ref]

logrotate is installed by default. The logrotate package can be installed with the following command:

 $ sudo zypper install logrotate

Rationale:

The logrotate package provides the logrotate services.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_logrotate_installed

Identifiers:

CCE-92561-0

References:

cis-csc	1, 14, 15, 16, 3, 5, 6
cobit5	APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01
disa	CCI-000366
isa-62443-2009	4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4
isa-62443-2013	SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9
iso27001-2013	A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1
nist	CM-6(a)
nist-csf	PR.PT-1
pcidss	Req-10.7
cis	4.2.4
anssi	R71
pcidss4	10.5.1

Remediation OSBuild Blueprint snippet ⇲


[[packages]]
name = "logrotate"
version = "*"

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

- name: Ensure logrotate is installed
  package:
    name: logrotate
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92561-0
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - PCI-DSSv4-10.5.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_logrotate_installed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include install_logrotate

class install_logrotate {
  package { 'logrotate':
    ensure => 'installed',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

zypper install -y "logrotate"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure Logrotate Runs Periodically [ref]

The logrotate utility allows for the automatic rotation of log files. The frequency of rotation is specified in /etc/logrotate.conf, which triggers a cron task or a timer. To configure logrotate to run daily, add or correct the following line in /etc/logrotate.conf:

# rotate log files frequency
daily

Rationale:

Log files that are not properly rotated run the risk of growing so large that they fill up the /var/log partition. Valuable logging information could be lost if the /var/log partition becomes full.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_ensure_logrotate_activated

Identifiers:

CCE-85850-6

References:

cis-csc	1, 14, 15, 16, 3, 5, 6
cobit5	APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01
disa	CCI-000366
isa-62443-2009	4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4
isa-62443-2013	SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9
iso27001-2013	A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1
nist	CM-6(a)
nist-csf	PR.PT-1
pcidss	Req-10.7
cis	4.2.4
anssi	R71

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-85850-6
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - configure_strategy
  - ensure_logrotate_activated
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Configure daily log rotation in /etc/logrotate.conf
  lineinfile:
    create: true
    dest: /etc/logrotate.conf
    regexp: ^daily$
    line: daily
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"logrotate" in ansible_facts.packages'
  tags:
  - CCE-85850-6
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - configure_strategy
  - ensure_logrotate_activated
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Make sure daily log rotation setting is not overriden in /etc/logrotate.conf
  lineinfile:
    create: false
    dest: /etc/logrotate.conf
    regexp: ^[\s]*(weekly|monthly|yearly)$
    state: absent
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"logrotate" in ansible_facts.packages'
  tags:
  - CCE-85850-6
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - configure_strategy
  - ensure_logrotate_activated
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Enable timer logrotate
  systemd:
    name: logrotate.timer
    enabled: 'yes'
    state: started
    masked: 'no'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"logrotate" in ansible_facts.packages'
  tags:
  - CCE-85850-6
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - configure_strategy
  - ensure_logrotate_activated
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q logrotate; }; then

LOGROTATE_CONF_FILE="/etc/logrotate.conf"

SYSTEMCTL_EXEC='/usr/bin/systemctl'


# daily rotation is configured
grep -q "^daily$" $LOGROTATE_CONF_FILE|| echo "daily" >> $LOGROTATE_CONF_FILE

# remove any line configuring weekly, monthly or yearly rotation
sed -i '/^\s*\(weekly\|monthly\|yearly\).*$/d' $LOGROTATE_CONF_FILE


# enable logrotate timer service
"$SYSTEMCTL_EXEC" unmask 'logrotate.timer'
"$SYSTEMCTL_EXEC" start 'logrotate.timer'
"$SYSTEMCTL_EXEC" enable 'logrotate.timer'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Enable logrotate Timer [ref]

The logrotate timer can be enabled with the following command:

$ sudo systemctl enable logrotate.timer

Rationale:

Log files that are not properly rotated run the risk of growing so large that they fill up the /var/log partition. Valuable logging information could be lost if the /var/log partition becomes full.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_timer_logrotate_enabled

Identifiers:

CCE-92585-9

References:

cis-csc	1, 14, 15, 16, 3, 5, 6
cobit5	APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01
disa	CCI-000366
isa-62443-2009	4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4
isa-62443-2013	SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9
iso27001-2013	A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1
nist	CM-6(a)
nist-csf	PR.PT-1
pcidss	Req-10.7
cis	4.2.4
anssi	R71
pcidss4	10.5.1

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92585-9
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - PCI-DSSv4-10.5.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - timer_logrotate_enabled

- name: Enable timer logrotate
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Enable timer logrotate
    systemd:
      name: logrotate.timer
      enabled: 'yes'
      state: started
    when:
    - '"logrotate" in ansible_facts.packages'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"logrotate" in ansible_facts.packages'
  tags:
  - CCE-92585-9
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - PCI-DSSv4-10.5.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - timer_logrotate_enabled

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q logrotate; }; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" start 'logrotate.timer'
"$SYSTEMCTL_EXEC" enable 'logrotate.timer'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Rsyslog Logs Sent To Remote Host Group contains 1 rule

[ref] If system logs are to be useful in detecting malicious activities, it is necessary to send logs to a remote server. An intruder who has compromised the root account on a system may delete the log entries which indicate that the system was attacked before they are seen by an administrator.

However, it is recommended that logs be stored on the local host in addition to being sent to the loghost, especially if rsyslog has been configured to use the UDP protocol to send messages over a network. UDP does not guarantee reliable delivery, and moderately busy sites will lose log messages occasionally, especially in periods of high traffic which may be the result of an attack. In addition, remote rsyslog messages are not authenticated in any way by default, so it is easy for an attacker to introduce spurious messages to the central log server. Also, some problems cause loss of network connectivity, which will prevent the sending of messages to the central server. For all of these reasons, it is better to store log messages both centrally and on each host, so that they can be correlated if necessary.

Rule Ensure Logs Sent To Remote Host [ref]

To configure rsyslog to send logs to a remote log server, open /etc/rsyslog.conf and read and understand the last section of the file, which describes the multiple directives necessary to activate remote logging. Along with these other directives, the system can be configured to forward its logs to a particular log server by adding or correcting one of the following lines, substituting logcollector appropriately. The choice of protocol depends on the environment of the system; although TCP and RELP provide more reliable message delivery, they may not be supported in all environments.
To use UDP for log message delivery:

*.* @logcollector

To use TCP for log message delivery:

*.* @@logcollector

To use RELP for log message delivery:

*.* :omrelp:logcollector

There must be a resolvable DNS CNAME or Alias record set to "logcollector" for logs to be sent correctly to the centralized logging utility.

Warning: It is important to configure queues in case the client is sending log messages to a remote server. If queues are not configured, the system will stop functioning when the connection to the remote server is not available. Please consult Rsyslog documentation for more information about configuration of queues. The example configuration which should go into /etc/rsyslog.conf can look like the following lines:

$ActionQueueType LinkedList
$ActionQueueFileName queuefilename
$ActionQueueMaxDiskSpace 1g
$ActionQueueSaveOnShutdown on
$ActionResumeRetryCount -1

Rationale:

A log server (loghost) receives syslog messages from one or more systems. This data can be used as an additional log source in the event a system is compromised and its local logs are suspect. Forwarding log messages to a remote loghost also provides system administrators with a centralized place to view the status of multiple hosts within the enterprise.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_rsyslog_remote_loghost

Identifiers:

CCE-85552-8

References:

cis-csc	1, 13, 14, 15, 16, 2, 3, 5, 6
cobit5	APO11.04, APO13.01, BAI03.05, BAI04.04, DSS05.04, DSS05.07, MEA02.01
disa	CCI-000366, CCI-001348, CCI-000136, CCI-001851
hipaa	164.308(a)(1)(ii)(D), 164.308(a)(5)(ii)(B), 164.308(a)(5)(ii)(C), 164.308(a)(6)(ii), 164.308(a)(8), 164.310(d)(2)(iii), 164.312(b), 164.314(a)(2)(i)(C), 164.314(a)(2)(iii)
isa-62443-2009	4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4
isa-62443-2013	SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 7.1, SR 7.2
ism	0988, 1405
iso27001-2013	A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.17.2.1
nerc-cip	CIP-003-8 R5.2, CIP-004-6 R3.3
nist	CM-6(a), AU-4(1), AU-9(2)
nist-csf	PR.DS-4, PR.PT-1
ospp	FAU_GEN.1.1.c
os-srg	SRG-OS-000479-GPOS-00224, SRG-OS-000480-GPOS-00227, SRG-OS-000342-GPOS-00133
stigid	SLES-15-010580
cis	4.2.1.5
anssi	R71
stigref	SV-234865r854211_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value rsyslog_remote_loghost_address # promote to variable
  set_fact:
    rsyslog_remote_loghost_address: !!str logcollector
  tags:
    - always

- name: Check for duplicate values in master configuration
  ansible.builtin.lineinfile:
    path: /etc/rsyslog.conf
    create: false
    regexp: ^\*\.\*\s+.*$
    state: absent
  changed_when: false
  register: dupes_master
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85552-8
  - DISA-STIG-SLES-15-010580
  - NIST-800-53-AU-4(1)
  - NIST-800-53-AU-9(2)
  - NIST-800-53-CM-6(a)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - rsyslog_remote_loghost

- name: Collect all config rsyslog files which configure remote logger
  ansible.builtin.find:
    paths: /etc/rsyslog.d/
    contains: ^\*\.\*\s+.*$
    patterns: '*.conf'
  register: rsyslog_dropin_config_files
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85552-8
  - DISA-STIG-SLES-15-010580
  - NIST-800-53-AU-4(1)
  - NIST-800-53-AU-9(2)
  - NIST-800-53-CM-6(a)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - rsyslog_remote_loghost

- name: Deduplicate values from rsyslog dropin configuration
  ansible.builtin.lineinfile:
    path: '{{ item.path }}'
    create: false
    regexp: ^\*\.\*\s+.*$
    state: absent
  loop: '{{  rsyslog_dropin_config_files.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85552-8
  - DISA-STIG-SLES-15-010580
  - NIST-800-53-AU-4(1)
  - NIST-800-53-AU-9(2)
  - NIST-800-53-CM-6(a)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - rsyslog_remote_loghost

- name: Set rsyslog remote loghost
  lineinfile:
    dest: /etc/rsyslog.d/remote.conf
    regexp: ^\*\.\*\s+.*$
    line: '*.* @@{{ rsyslog_remote_loghost_address }}'
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85552-8
  - DISA-STIG-SLES-15-010580
  - NIST-800-53-AU-4(1)
  - NIST-800-53-AU-9(2)
  - NIST-800-53-CM-6(a)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - rsyslog_remote_loghost

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

rsyslog_remote_loghost_address='logcollector'

# If the key exists, comment it. Otherwise do nothing
# We search for the key string followed by a blank space,
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^\*\.\*[[:blank:]]" "/etc/rsyslog.conf"; then
    LC_ALL=C sed -i --follow-symlinks "s/^\*\.\*[[:blank:]].*/#&/gi" "/etc/rsyslog.conf"
fi
# If the key exists, comment it. Otherwise do nothing
# We search for the key string followed by a blank space,
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^\*\.\*[[:blank:]]" "/etc/rsyslog.d/*.conf"; then
    LC_ALL=C sed -i --follow-symlinks "s/^\*\.\*[[:blank:]].*/#&/gi" "/etc/rsyslog.d/*.conf"
fi
# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^\*\.\*")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "@@$rsyslog_remote_loghost_address"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^\*\.\*\\>" "/etc/rsyslog.d/remote.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^\*\.\*\\>.*/$escaped_formatted_output/gi" "/etc/rsyslog.d/remote.conf"
else
    if [[ -s "/etc/rsyslog.d/remote.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/rsyslog.d/remote.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/rsyslog.d/remote.conf"
    fi
    cce="CCE-85552-8"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/rsyslog.d/remote.conf" >> "/etc/rsyslog.d/remote.conf"
    printf '%s\n' "$formatted_output" >> "/etc/rsyslog.d/remote.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure rsyslog is Installed [ref]

Rsyslog is installed by default. The rsyslog package can be installed with the following command:

 $ sudo zypper install rsyslog

Rationale:

The rsyslog package provides the rsyslog daemon, which provides system logging services.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_rsyslog_installed

Identifiers:

CCE-91161-0

References:

cis-csc	1, 14, 15, 16, 3, 5, 6
cobit5	APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01
disa	CCI-001311, CCI-001312, CCI-000366
hipaa	164.312(a)(2)(ii)
isa-62443-2009	4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4
isa-62443-2013	SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9
iso27001-2013	A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1
nist	CM-6(a)
nist-csf	PR.PT-1
ospp	FTP_ITC_EXT.1.1
os-srg	SRG-OS-000479-GPOS-00224, SRG-OS-000051-GPOS-00024, SRG-OS-000480-GPOS-00227
cis	4.2.1.1

Remediation OSBuild Blueprint snippet ⇲


[[packages]]
name = "rsyslog"
version = "*"

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

- name: Ensure rsyslog is installed
  package:
    name: rsyslog
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91161-0
  - NIST-800-53-CM-6(a)
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_rsyslog_installed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include install_rsyslog

class install_rsyslog {
  package { 'rsyslog':
    ensure => 'installed',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

zypper install -y "rsyslog"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Enable rsyslog Service [ref]

The rsyslog service provides syslog-style logging by default on SUSE Linux Enterprise 15. The rsyslog service can be enabled with the following command:

$ sudo systemctl enable rsyslog.service

Rationale:

The rsyslog service must be running in order to provide logging services, which are essential to system administration.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_service_rsyslog_enabled

Identifiers:

CCE-91162-8

References:

cis-csc	1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9
cobit5	APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO13.01, BAI03.05, BAI04.04, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01
disa	CCI-001311, CCI-001312, CCI-001557, CCI-001851, CCI-000366
hipaa	164.312(a)(2)(ii)
isa-62443-2009	4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4
isa-62443-2013	SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, SR 7.1, SR 7.2
iso27001-2013	A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, A.17.2.1
nist	CM-6(a), AU-4(1)
nist-csf	DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.DS-4, PR.PT-1
os-srg	SRG-OS-000480-GPOS-00227
cis	4.2.1.2

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
enabled = ["rsyslog"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

- name: Enable rsyslog Service - Enable service rsyslog
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Enable rsyslog Service - Enable Service rsyslog
    ansible.builtin.systemd:
      name: rsyslog
      enabled: true
      state: started
      masked: false
    when:
    - '"rsyslog" in ansible_facts.packages'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91162-8
  - NIST-800-53-AU-4(1)
  - NIST-800-53-CM-6(a)
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_rsyslog_enabled

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include enable_rsyslog

class enable_rsyslog {
  service {'rsyslog':
    enable => true,
    ensure => 'running',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'rsyslog.service'
"$SYSTEMCTL_EXEC" start 'rsyslog.service'
"$SYSTEMCTL_EXEC" enable 'rsyslog.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Network Configuration and Firewalls Group contains 15 groups and 52 rules

[ref] Most systems must be connected to a network of some sort, and this brings with it the substantial risk of network attack. This section discusses the security impact of decisions about networking which must be made when configuring a system.

This section also discusses firewalls, network access controls, and other network security frameworks, which allow system-level rules to be written that can limit an attackers' ability to connect to your system. These rules can specify that network traffic should be allowed or denied from certain IP addresses, hosts, and networks. The rules can also specify which of the system's network services are available to particular hosts or networks.

Group firewalld Group contains 3 groups and 9 rules

[ref] The dynamic firewall daemon firewalld provides a dynamically managed firewall with support for network “zones” to assign a level of trust to a network and its associated connections and interfaces. It has support for IPv4 and IPv6 firewall settings. It supports Ethernet bridges and has a separation of runtime and permanent configuration options. It also has an interface for services or applications to add firewall rules directly.
A graphical configuration tool, firewall-config, is used to configure firewalld, which in turn uses iptables tool to communicate with Netfilter in the kernel which implements packet filtering.
The firewall service provided by firewalld is dynamic rather than static because changes to the configuration can be made at anytime and are immediately implemented. There is no need to save or apply the changes. No unintended disruption of existing network connections occurs as no part of the firewall has to be reloaded.

Group Inspect and Activate Default firewalld Rules Group contains 2 rules

[ref] Firewalls can be used to separate networks into different zones based on the level of trust the user has decided to place on the devices and traffic within that network. NetworkManager informs firewalld to which zone an interface belongs. An interface's assigned zone can be changed by NetworkManager or via the firewall-config tool.
The zone settings in /etc/firewalld/ are a range of preset settings which can be quickly applied to a network interface. These are the zones provided by firewalld sorted according to the default trust level of the zones from untrusted to trusted:

drop
Any incoming network packets are dropped, there is no reply. Only outgoing network connections are possible.
block
Any incoming network connections are rejected with an icmp-host-prohibited message for IPv4 and icmp6-adm-prohibited for IPv6. Only network connections initiated from within the system are possible.
public
For use in public areas. You do not trust the other computers on the network to not harm your computer. Only selected incoming connections are accepted.
external
For use on external networks with masquerading enabled especially for routers. You do not trust the other computers on the network to not harm your computer. Only selected incoming connections are accepted.
dmz
For computers in your demilitarized zone that are publicly-accessible with limited access to your internal network. Only selected incoming connections are accepted.
work
For use in work areas. You mostly trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted.
home
For use in home areas. You mostly trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted.
internal
For use on internal networks. You mostly trust the other computers on the networks to not harm your computer. Only selected incoming connections are accepted.
trusted
All network connections are accepted.

It is possible to designate one of these zones to be the default zone. When interface connections are added to NetworkManager, they are assigned to the default zone. On installation, the default zone in firewalld is set to be the public zone.
To find out all the settings of a zone, for example the public zone, enter the following command as root:

# firewall-cmd --zone=public --list-all

Example output of this command might look like the following:

# firewall-cmd --zone=public --list-all
public
  interfaces:
  services: mdns dhcpv6-client ssh
  ports:
  forward-ports:
  icmp-blocks: source-quench

To view the network zones currently active, enter the following command as root:

# firewall-cmd --get-service

The following listing displays the result of this command on common SUSE Linux Enterprise 15 system:

# firewall-cmd --get-service
amanda-client bacula bacula-client dhcp dhcpv6 dhcpv6-client dns ftp
high-availability http https imaps ipp ipp-client ipsec kerberos kpasswd
ldap ldaps libvirt libvirt-tls mdns mountd ms-wbt mysql nfs ntp openvpn
pmcd pmproxy pmwebapi pmwebapis pop3s postgresql proxy-dhcp radius rpc-bind
samba samba-client smtp ssh telnet tftp tftp-client transmission-client
vnc-server wbem-https

Finally to view the network zones that will be active after the next firewalld service reload, enter the following command as root:

# firewall-cmd --get-service --permanent

Rule Install firewalld Package [ref]

The firewalld package can be installed with the following command:

$ sudo zypper install firewalld

Rationale:

"Firewalld" provides an easy and effective way to block/limit remote access to the system via ports, services, and protocols. Remote access services, such as those providing remote access to network devices and information systems, which lack automated control capabilities, increase risk and make remote user access management difficult at best. Remote access is access to DoD nonpublic information systems by an authorized user (or an information system) communicating through an external, non-organization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless. SUSE Linux Enterprise 15 functionality (e.g., SSH) must be capable of taking enforcement action if the audit reveals unauthorized activity. Automated control of remote access sessions allows organizations to ensure ongoing compliance with remote access policies by enforcing connection rules of remote access applications on a variety of information system components (e.g., servers, workstations, notebook computers, smartphones, and tablets)."

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_firewalld_installed

Identifiers:

CCE-85698-9

References:

disa	CCI-002314
nist	CM-7, CM-7.1(iii), CM-7(b), AC-17(1)
ospp	FMT_SMF_EXT.1
os-srg	SRG-OS-000096-GPOS-00050, SRG-OS-000297-GPOS-00115, SRG-OS-000298-GPOS-00116, SRG-OS-000480-GPOS-00227, SRG-OS-000480-GPOS-00232
stigid	SLES-15-010220
cis	3.5.1.1
pcidss4	1.2.1
stigref	SV-234821r854186_rule

Remediation OSBuild Blueprint snippet ⇲


[[packages]]
name = "firewalld"
version = "*"

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

- name: Ensure firewalld is installed
  package:
    name: firewalld
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85698-9
  - DISA-STIG-SLES-15-010220
  - NIST-800-53-AC-17(1)
  - NIST-800-53-CM-7
  - NIST-800-53-CM-7(b)
  - NIST-800-53-CM-7.1(iii)
  - PCI-DSSv4-1.2.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_firewalld_installed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include install_firewalld

class install_firewalld {
  package { 'firewalld':
    ensure => 'installed',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

zypper install -y "firewalld"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify firewalld Enabled [ref]

The firewalld service can be enabled with the following command:

$ sudo systemctl enable firewalld.service

Rationale:

Access control methods provide the ability to enhance system security posture by restricting services and known good IP addresses and address ranges. This prevents connections from unknown hosts and protocols.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_service_firewalld_enabled

Identifiers:

CCE-85751-6

References:

cis-csc	11, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05
cui	3.1.3, 3.4.7
disa	CCI-000366, CCI-000382, CCI-002314
isa-62443-2009	4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4
nerc-cip	CIP-003-8 R4, CIP-003-8 R5, CIP-004-6 R3
nist	CM-7, CM-7.1(iii), CM-7(b), AC-17(1)
nist-csf	PR.IP-1
ospp	FMT_SMF_EXT.1
os-srg	SRG-OS-000096-GPOS-00050, SRG-OS-000297-GPOS-00115, SRG-OS-000480-GPOS-00227, SRG-OS-000480-GPOS-00231, SRG-OS-000480-GPOS-00232
stigid	SLES-15-010220
cis	3.5.1.3
pcidss4	1.2.1
stigref	SV-234821r854186_rule

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
enabled = ["firewalld"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-85751-6
  - DISA-STIG-SLES-15-010220
  - NIST-800-171-3.1.3
  - NIST-800-171-3.4.7
  - NIST-800-53-AC-17(1)
  - NIST-800-53-CM-7
  - NIST-800-53-CM-7(b)
  - NIST-800-53-CM-7.1(iii)
  - PCI-DSSv4-1.2.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_firewalld_enabled

- name: Verify firewalld Enabled - Enable service firewalld
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Verify firewalld Enabled - Enable Service firewalld
    ansible.builtin.systemd:
      name: firewalld
      enabled: true
      state: started
      masked: false
    when:
    - '"firewalld" in ansible_facts.packages'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"firewalld" in ansible_facts.packages'
  tags:
  - CCE-85751-6
  - DISA-STIG-SLES-15-010220
  - NIST-800-171-3.1.3
  - NIST-800-171-3.4.7
  - NIST-800-53-AC-17(1)
  - NIST-800-53-CM-7
  - NIST-800-53-CM-7(b)
  - NIST-800-53-CM-7.1(iii)
  - PCI-DSSv4-1.2.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_firewalld_enabled

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include enable_firewalld

class enable_firewalld {
  service {'firewalld':
    enable => true,
    ensure => 'running',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q firewalld; }; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'firewalld.service'
"$SYSTEMCTL_EXEC" start 'firewalld.service'
"$SYSTEMCTL_EXEC" enable 'firewalld.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Strengthen the Default Ruleset Group contains 2 rules

[ref] The default rules can be strengthened. The system scripts that activate the firewall rules expect them to be defined in configuration files under the /etc/firewalld/services and /etc/firewalld/zones directories.

The following recommendations describe how to strengthen the default ruleset configuration file. An alternative to editing this configuration file is to create a shell script that makes calls to the firewall-cmd program to load in rules under the /etc/firewalld/services and /etc/firewalld/zones directories.

Instructions apply to both unless otherwise noted. Language and address conventions for regular firewalld rules are used throughout this section.

Warning: The program firewall-config allows additional services to penetrate the default firewall rules and automatically adjusts the firewalld ruleset(s).

Rule Ensure firewall rules exist for all open ports [ref]

Any ports that have been opened on non-loopback addresses need firewall rules to govern traffic.

Warning: To prevent denying any access to the system, automatic remediation of this control is not available. Remediation must be automated as a component of machine provisioning, or followed manually as outlined above.

Rationale:

Without a firewall rule configured for open ports default firewall policy will drop all packets to these ports.

Severity:

medium

Rule ID:

xccdf_org.ssgproject.content_rule_ensure_firewall_rules_for_open_ports

Identifiers:

CCE-91411-9

References:

pcidss	Req-1.4
cis	3.5.3.2.4, 3.5.3.3.4
pcidss4	1.3.1

Rule Set Default firewalld Zone for Incoming Packets [ref]

To set the default zone to drop for the built-in default zone which processes incoming IPv4 and IPv6 packets, modify the following line in /etc/firewalld/firewalld.conf to be:

DefaultZone=drop

Rationale:

In firewalld the default zone is applied only after all the applicable rules in the table are examined for a match. Setting the default zone to drop implements proper design for a firewall, i.e. any packets which are not explicitly permitted should not be accepted.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_set_firewalld_default_zone

Identifiers:

CCE-91410-1

References:

cis-csc	11, 14, 3, 9
cjis	5.10.1
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
cui	3.1.3, 3.4.7, 3.13.6
disa	CCI-000366
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
ism	1416
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CA-3(5), CM-7(b), SC-7(23), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
ospp	FMT_MOF_EXT.1
pcidss	Req-1.4
os-srg	SRG-OS-000480-GPOS-00227
cis	3.5.1.4
pcidss4	1.3.1

Group Dectivate firewalld Rules Group contains 2 rules

[ref] Firewalls can be used to separate networks into different zones based on the level of trust the user has decided to place on the devices and traffic within that network. Firewalls can be implemented using variety of software tools and services, i.e. iptables, nftables, firewalld, ufw, SuSEFirewall2 etc. Having more than one service controlling the firewall functionality may lead to conflicts and misconfiguration. Therefore, in case one uses iptables or nftables firewalld service should be disabled.

Rule Uninstall firewalld Package [ref]

firewalld (Dynamic Firewall Manager) provides a dynamically managed firewall with support for network/firewall “zones” to assign a level of trust to a network and its associated connections, interfaces or sources. It has support for IPv4, IPv6, Ethernet bridges and also for IPSet firewall settings. There is a separation of the runtime and permanent configuration options. The firewalld package can be removed with the following command:

$ sudo zypper remove firewalld

Rationale:

Running both nftables.service and firewalld.service may lead to conflict and unexpected results.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_firewalld_removed

Identifiers:

CCE-92471-2

References:

cis	3.5.2.2, 3.5.3.1.3

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure firewalld is removed
  package:
    name: firewalld
    state: absent
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92471-2
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_firewalld_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_firewalld

class remove_firewalld {
  package { 'firewalld':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# CAUTION: This remediation script will remove firewalld
#	   from the system, and may remove any packages
#	   that depend on firewalld. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "firewalld"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify firewalld service disabled [ref]

Firewalld (Dynamic Firewall Manager) provides a dynamically managed firewall with support for network/firewall “zones” to assign a level of trust to a network and its associated connections, interfaces or sources. It has support for IPv4, IPv6, Ethernet bridges and also for IPSet firewall settings. There is a separation of the runtime and permanent configuration options. The firewalld service can be disabled with the following command:

$ sudo systemctl mask --now firewalld.service

Rationale:

Running Firewalld along other service with the same functionality may lead to conflict and unexpected results.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_service_firewalld_disabled

Identifiers:

CCE-92472-0

References:

cis	3.5.2.2, 3.5.3.1.3

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
masked = ["firewalld"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Verify firewalld service disabled - Collect systemd Services Present in the
    System
  ansible.builtin.command: systemctl -q list-unit-files --type service
  register: service_exists
  changed_when: false
  failed_when: service_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92472-0
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_firewalld_disabled

- name: Verify firewalld service disabled - Ensure firewalld.service is Masked
  ansible.builtin.systemd:
    name: firewalld.service
    state: stopped
    enabled: false
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - service_exists.stdout_lines is search("firewalld.service", multiline=True)
  tags:
  - CCE-92472-0
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_firewalld_disabled

- name: Unit Socket Exists - firewalld.socket
  ansible.builtin.command: systemctl -q list-unit-files firewalld.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92472-0
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_firewalld_disabled

- name: Verify firewalld service disabled - Disable Socket firewalld
  ansible.builtin.systemd:
    name: firewalld.socket
    enabled: false
    state: stopped
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - socket_file_exists.stdout_lines is search("firewalld.socket", multiline=True)
  tags:
  - CCE-92472-0
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_firewalld_disabled

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include disable_firewalld

class disable_firewalld {
  service {'firewalld':
    enable => false,
    ensure => 'stopped',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'firewalld.service'
"$SYSTEMCTL_EXEC" disable 'firewalld.service'
"$SYSTEMCTL_EXEC" mask 'firewalld.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files firewalld.socket; then
    "$SYSTEMCTL_EXEC" stop 'firewalld.socket'
    "$SYSTEMCTL_EXEC" mask 'firewalld.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'firewalld.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Configure Firewalld to Use the Nftables Backend [ref]

Firewalld can be configured with many backends, such as nftables.

Rationale:

Nftables is modern kernel module for controling network connections coming into a system. Utilizing the limit statement in "nftables" can help to mitigate DoS attacks.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_firewalld-backend

Identifiers:

CCE-92470-4

References:

disa	CCI-002385
nist	SC-5
os-srg	SRG-OS-000420-GPOS-00186
cis	3.5.2.1

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92470-4
  - NIST-800-53-SC-5
  - firewalld-backend
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Setting unquoted shell-style assignment of 'FirewallBackend' to 'nftables'
    in '/etc/firewalld/firewalld.conf'
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/firewalld/firewalld.conf
      create: true
      regexp: ^\s*FirewallBackend=
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/firewalld/firewalld.conf
    lineinfile:
      path: /etc/firewalld/firewalld.conf
      create: true
      regexp: ^\s*FirewallBackend=
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/firewalld/firewalld.conf
    lineinfile:
      path: /etc/firewalld/firewalld.conf
      create: true
      regexp: ^\s*FirewallBackend=
      line: FirewallBackend=nftables
      state: present
      insertbefore: ^# FirewallBackend
      validate: /usr/bin/bash -n %s
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"firewalld" in ansible_facts.packages'
  tags:
  - CCE-92470-4
  - NIST-800-53-SC-5
  - firewalld-backend
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q firewalld; }; then

if [ -e "/etc/firewalld/firewalld.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*FirewallBackend\s*=\s*/d" "/etc/firewalld/firewalld.conf"
else
    touch "/etc/firewalld/firewalld.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/firewalld/firewalld.conf"

cp "/etc/firewalld/firewalld.conf" "/etc/firewalld/firewalld.conf.bak"
# Insert before the line matching the regex '^#\s*FirewallBackend'.
line_number="$(LC_ALL=C grep -n "^#\s*FirewallBackend" "/etc/firewalld/firewalld.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^#\s*FirewallBackend', insert at
    # the end of the file.
    printf '%s\n' "FirewallBackend=nftables" >> "/etc/firewalld/firewalld.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/firewalld/firewalld.conf.bak" > "/etc/firewalld/firewalld.conf"
    printf '%s\n' "FirewallBackend=nftables" >> "/etc/firewalld/firewalld.conf"
    tail -n "+$(( line_number ))" "/etc/firewalld/firewalld.conf.bak" >> "/etc/firewalld/firewalld.conf"
fi
# Clean up after ourselves.
rm "/etc/firewalld/firewalld.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure network interfaces are assigned to appropriate zone [ref]

Firewall zones define the trust level of network connections or interfaces. Note: Changing firewall settings while connected over network can result in being locked out of the system.

Rationale:

A network interface not assigned to the appropriate zone can allow unexpected or undesired network traffic to be accepted on the interface.

Severity:

medium

Rule ID:

xccdf_org.ssgproject.content_rule_set_firewalld_appropriate_zone

Identifiers:

CCE-92556-0

References:

cis	3.5.1.5

Rule Ensure Unnecessary Services and Ports Are Not Accepted [ref]

Services and ports can be accepted or explicitly rejected or dropped by a zone. For every zone, a default behavior can be set that handles incoming traffic that is not further specified. Such behavior is defined by setting the target of the zone. The possible options are: - ACCEPT - accepts all incoming packets except those disabled by a specific rule. - REJECT - disables all incoming packets except those that have been allowed in specific rules and the source machine is informed about the rejection. - DROP - disables all incoming packets except those that have been allowed in specific rules and no information sent to the source machine.

Rationale:

To reduce the attack surface of a system, all services and ports should be blocked unless required.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_unnecessary_firewalld_services_ports_disabled

Identifiers:

CCE-92552-9

References:

cis	3.5.1.6

Group iptables and ip6tables Group contains 2 groups and 9 rules

[ref] A host-based firewall called netfilter is included as part of the Linux kernel distributed with the system. It is activated by default. This firewall is controlled by the program iptables, and the entire capability is frequently referred to by this name. An analogous program called ip6tables handles filtering for IPv6.

Unlike TCP Wrappers, which depends on the network server program to support and respect the rules written, netfilter filtering occurs at the kernel level, before a program can even process the data from the network packet. As such, any program on the system is affected by the rules written.

This section provides basic information about strengthening the iptables and ip6tables configurations included with the system. For more complete information that may allow the construction of a sophisticated ruleset tailored to your environment, please consult the references at the end of this section.

Group Inspect and Activate Default Rules Group contains 4 rules

[ref] View the currently-enforced iptables rules by running the command:

$ sudo iptables -nL --line-numbers

The command is analogous for ip6tables.

If the firewall does not appear to be active (i.e., no rules appear), activate it and ensure that it starts at boot by issuing the following commands (and analogously for ip6tables):

$ sudo service iptables restart

The default iptables rules are:

Chain INPUT (policy ACCEPT)
num  target     prot opt source       destination
1    ACCEPT     all  --  0.0.0.0/0    0.0.0.0/0    state RELATED,ESTABLISHED 
2    ACCEPT     icmp --  0.0.0.0/0    0.0.0.0/0
3    ACCEPT     all  --  0.0.0.0/0    0.0.0.0/0
4    ACCEPT     tcp  --  0.0.0.0/0    0.0.0.0/0    state NEW tcp dpt:22 
5    REJECT     all  --  0.0.0.0/0    0.0.0.0/0    reject-with icmp-host-prohibited 

Chain FORWARD (policy ACCEPT)
num  target     prot opt source       destination
1    REJECT     all  --  0.0.0.0/0    0.0.0.0/0    reject-with icmp-host-prohibited 

Chain OUTPUT (policy ACCEPT)
num  target     prot opt source       destination

The ip6tables default rules are essentially the same.

Rule Verify iptables Enabled [ref]

The iptables service can be enabled with the following command:

$ sudo systemctl enable iptables.service

Rationale:

The iptables service provides the system's host-based firewalling capability for IPv4 and ICMP.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_service_iptables_enabled

Identifiers:

CCE-92475-3

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 18, 3, 4, 6, 8, 9
cobit5	APO01.06, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
isa-62443-2009	4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R4, CIP-003-8 R5, CIP-004-6 R3
nist	AC-4, CM-7(b), CA-3(5), SC-7(21), CM-6(a)
nist-csf	DE.AE-1, ID.AM-3, PR.AC-5, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
cis	3.5.3.1.1

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
enabled = ["iptables"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92475-3
  - NIST-800-53-AC-4
  - NIST-800-53-CA-3(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(21)
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_iptables_enabled

- name: Verify iptables Enabled - Enable service iptables
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Verify iptables Enabled - Enable Service iptables
    ansible.builtin.systemd:
      name: iptables
      enabled: true
      state: started
      masked: false
    when:
    - '"iptables" in ansible_facts.packages'
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "iptables" in ansible_facts.packages )
  tags:
  - CCE-92475-3
  - NIST-800-53-AC-4
  - NIST-800-53-CA-3(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(21)
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_iptables_enabled

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include enable_iptables

class enable_iptables {
  service {'iptables':
    enable => true,
    ensure => 'running',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q iptables ); then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'iptables.service'
"$SYSTEMCTL_EXEC" start 'iptables.service'
"$SYSTEMCTL_EXEC" enable 'iptables.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Set Default ip6tables Policy for Incoming Packets [ref]

To set the default policy to DROP (instead of ACCEPT) for the built-in INPUT chain which processes incoming packets, add or correct the following line in /etc/sysconfig/ip6tables:

:INPUT DROP [0:0]

If changes were required, reload the ip6tables rules:

$ sudo service ip6tables reload

Rationale:

In ip6tables, the default policy is applied only after all the applicable rules in the table are examined for a match. Setting the default policy to DROP implements proper design for a firewall, i.e. any packets which are not explicitly permitted should not be accepted.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_set_ip6tables_default_rule

Identifiers:

CCE-91342-6

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nerc-cip	CIP-003-8 R4, CIP-003-8 R5, CIP-004-6 R3
nist	AC-4, CM-7(b), CA-3(5), SC-7(21), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	3.5.3.3.1
pcidss4	1.4.1

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if ( ! ( rpm --quiet -q nftables ) && ! ( rpm --quiet -q ufw ) && rpm --quiet -q iptables ); then

sed -i 's/^:INPUT ACCEPT.*/:INPUT DROP [0:0]/g' /etc/sysconfig/ip6tables

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Set configuration for IPv6 loopback traffic [ref]

Configure the loopback interface to accept traffic. Configure all other interfaces to deny traffic to the loopback network.

Warning: Changing firewall settings while connected over network can result in being locked out of the system.

Rationale:

Loopback traffic is generated between processes on machine and is typically critical to operation of the system. The loopback interface is the only place that loopback network traffic should be seen, all other interfaces should ignore traffic on this network as an anti-spoofing measure.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_set_ipv6_loopback_traffic

Identifiers:

CCE-91346-7

References:

pcidss	Req-1.3
cis	3.5.3.3.2
pcidss4	1.4.1

Remediation Ansible snippet ⇲

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91346-7
  - PCI-DSS-Req-1.3
  - PCI-DSSv4-1.4.1
  - medium_severity
  - set_ipv6_loopback_traffic

- name: Check if IPv6 is enabled
  command: sysctl -n net.ipv6.conf.all.disable_ipv6
  register: ipv6_status
  failed_when: ipv6_status.stdout != "0"
  when: ( not ( "nftables" in ansible_facts.packages ) and not ( "ufw" in ansible_facts.packages
    ) and "iptables" in ansible_facts.packages )
  tags:
  - CCE-91346-7
  - PCI-DSS-Req-1.3
  - PCI-DSSv4-1.4.1
  - medium_severity
  - set_ipv6_loopback_traffic

- name: Allow incoming traffic on the loopback interface
  ansible.builtin.iptables:
    ipv6: true
    chain: INPUT
    in_interface: lo
    jump: ACCEPT
  when:
  - ( not ( "nftables" in ansible_facts.packages ) and not ( "ufw" in ansible_facts.packages
    ) and "iptables" in ansible_facts.packages )
  - ipv6_status.stdout == '0'
  tags:
  - CCE-91346-7
  - PCI-DSS-Req-1.3
  - PCI-DSSv4-1.4.1
  - medium_severity
  - set_ipv6_loopback_traffic

- name: Allow outgoing traffic on the loopback interface
  ansible.builtin.iptables:
    ipv6: true
    chain: OUTPUT
    out_interface: lo
    jump: ACCEPT
  when:
  - ( not ( "nftables" in ansible_facts.packages ) and not ( "ufw" in ansible_facts.packages
    ) and "iptables" in ansible_facts.packages )
  - ipv6_status.stdout == '0'
  tags:
  - CCE-91346-7
  - PCI-DSS-Req-1.3
  - PCI-DSSv4-1.4.1
  - medium_severity
  - set_ipv6_loopback_traffic

- name: Drop incoming traffic from the localhost
  ansible.builtin.iptables:
    ipv6: true
    chain: INPUT
    source: ::1
    jump: DROP
  when:
  - ( not ( "nftables" in ansible_facts.packages ) and not ( "ufw" in ansible_facts.packages
    ) and "iptables" in ansible_facts.packages )
  - ipv6_status.stdout == '0'
  tags:
  - CCE-91346-7
  - PCI-DSS-Req-1.3
  - PCI-DSSv4-1.4.1
  - medium_severity
  - set_ipv6_loopback_traffic

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if ( ! ( rpm --quiet -q nftables ) && ! ( rpm --quiet -q ufw ) && rpm --quiet -q iptables ); then

if [ "$(sysctl -n net.ipv6.conf.all.disable_ipv6)" -eq 0 ]; then
  # IPv6 is not disabled, so run the script
  ip6tables -A INPUT -i lo -j ACCEPT
  ip6tables -A OUTPUT -o lo -j ACCEPT
  ip6tables -A INPUT -s ::1 -j DROP
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Set configuration for loopback traffic [ref]

Configure the loopback interface to accept traffic. Configure all other interfaces to deny traffic to the loopback network.

Warning: Changing firewall settings while connected over network can result in being locked out of the system.

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_set_loopback_traffic

Identifiers:

CCE-91345-9

References:

pcidss	Req-1.3
cis	3.5.3.2.2
pcidss4	1.4.1

Remediation Ansible snippet ⇲

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91345-9
  - PCI-DSS-Req-1.3
  - PCI-DSSv4-1.4.1
  - medium_severity
  - set_loopback_traffic

- name: Allow incoming traffic on the loopback interface
  ansible.builtin.iptables:
    chain: INPUT
    in_interface: lo
    jump: ACCEPT
  when: ( not ( "nftables" in ansible_facts.packages ) and not ( "ufw" in ansible_facts.packages
    ) and "iptables" in ansible_facts.packages )
  tags:
  - CCE-91345-9
  - PCI-DSS-Req-1.3
  - PCI-DSSv4-1.4.1
  - medium_severity
  - set_loopback_traffic

- name: Allow outgoing traffic on the loopback interface
  ansible.builtin.iptables:
    chain: OUTPUT
    out_interface: lo
    jump: ACCEPT
  when: ( not ( "nftables" in ansible_facts.packages ) and not ( "ufw" in ansible_facts.packages
    ) and "iptables" in ansible_facts.packages )
  tags:
  - CCE-91345-9
  - PCI-DSS-Req-1.3
  - PCI-DSSv4-1.4.1
  - medium_severity
  - set_loopback_traffic

- name: Drop incoming traffic from the localhost
  ansible.builtin.iptables:
    chain: INPUT
    source: 127.0.0.0/8
    jump: DROP
  when: ( not ( "nftables" in ansible_facts.packages ) and not ( "ufw" in ansible_facts.packages
    ) and "iptables" in ansible_facts.packages )
  tags:
  - CCE-91345-9
  - PCI-DSS-Req-1.3
  - PCI-DSSv4-1.4.1
  - medium_severity
  - set_loopback_traffic

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if ( ! ( rpm --quiet -q nftables ) && ! ( rpm --quiet -q ufw ) && rpm --quiet -q iptables ); then

iptables -A INPUT -i lo -j ACCEPT
iptables -A OUTPUT -o lo -j ACCEPT
iptables -A INPUT -s 127.0.0.0/8 -j DROP

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Strengthen the Default Ruleset Group contains 3 rules

[ref] The default rules can be strengthened. The system scripts that activate the firewall rules expect them to be defined in the configuration files iptables and ip6tables in the directory /etc/sysconfig. Many of the lines in these files are similar to the command line arguments that would be provided to the programs /sbin/iptables or /sbin/ip6tables - but some are quite different.

The following recommendations describe how to strengthen the default ruleset configuration file. An alternative to editing this configuration file is to create a shell script that makes calls to the iptables program to load in rules, and then invokes service iptables save to write those loaded rules to /etc/sysconfig/iptables.

The following alterations can be made directly to /etc/sysconfig/iptables and /etc/sysconfig/ip6tables. Instructions apply to both unless otherwise noted. Language and address conventions for regular iptables are used throughout this section; configuration for ip6tables will be either analogous or explicitly covered.

Warning: The program system-config-securitylevel allows additional services to penetrate the default firewall rules and automatically adjusts /etc/sysconfig/iptables. This program is only useful if the default ruleset meets your security requirements. Otherwise, this program should not be used to make changes to the firewall configuration because it re-writes the saved configuration file.

Rule Set Default iptables Policy for Incoming Packets [ref]

To set the default policy to DROP (instead of ACCEPT) for the built-in INPUT chain which processes incoming packets, add or correct the following line in /etc/sysconfig/iptables:

:INPUT DROP [0:0]

Rationale:

In iptables the default policy is applied only after all the applicable rules in the table are examined for a match. Setting the default policy to DROP implements proper design for a firewall, i.e. any packets which are not explicitly permitted should not be accepted.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_set_iptables_default_rule

Identifiers:

CCE-92494-4

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CA-3(5), CM-7(b), SC-7(23), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	3.5.3.2.1

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q iptables && { ( ! ( rpm --quiet -q nftables ) && ! ( rpm --quiet -q ufw ) ); }; then

sed -i 's/^:INPUT ACCEPT.*/:INPUT DROP [0:0]/g' /etc/sysconfig/iptables

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Set Default iptables Policy for Forwarded Packets [ref]

To set the default policy to DROP (instead of ACCEPT) for the built-in FORWARD chain which processes packets that will be forwarded from one interface to another, add or correct the following line in /etc/sysconfig/iptables:

:FORWARD DROP [0:0]

Rationale:

In iptables, the default policy is applied only after all the applicable rules in the table are examined for a match. Setting the default policy to DROP implements proper design for a firewall, i.e. any packets which are not explicitly permitted should not be accepted.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_set_iptables_default_rule_forward

Identifiers:

CCE-92483-7

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CA-3(5), CM-7(b), SC-7(23), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	3.5.3.2.1

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q iptables; then

sed -i 's/^:FORWARD ACCEPT.*/:FORWARD DROP [0:0]/g' /etc/sysconfig/iptables

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure Outbound and Established Connections are Configured [ref]

Configure the firewall rules for new outbound and established connections.

Warning: Changing firewall settings while connected over network can result in being locked out of the system.

Rationale:

If rules are not in place for new outbound, and established connections all packets will be dropped by the default policy preventing network usage.

Severity:

medium

Rule ID:

xccdf_org.ssgproject.content_rule_set_iptables_outbound_n_established

Identifiers:

CCE-92531-3

References:

cis	3.5.3.2.3, 3.5.3.3.3

Rule Install iptables Package [ref]

The iptables package can be installed with the following command:

$ sudo zypper install iptables

Rationale:

iptables controls the Linux kernel network packet filtering code. iptables allows system operators to set up firewalls and IP masquerading, etc.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_iptables_installed

Identifiers:

CCE-91244-4

References:

nist	CM-6(a)
pcidss	Req-1.4.1
os-srg	SRG-OS-000480-GPOS-00227
cis	3.5.3.1.1

Remediation OSBuild Blueprint snippet ⇲


[[packages]]
name = "iptables"
version = "*"

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

- name: Ensure iptables is installed
  package:
    name: iptables
    state: present
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] )
  tags:
  - CCE-91244-4
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-1.4.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_iptables_installed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include install_iptables

class install_iptables {
  package { 'iptables':
    ensure => 'installed',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] ); then

zypper install -y "iptables"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure iptables are flushed [ref]

nftables is a replacement for iptables, ip6tables, ebtables and arptables

Rationale:

It is possible to mix iptables and nftables. However, this increases complexity and also the chance to introduce errors. For simplicity flush out all iptables rules, and ensure it is not loaded.

Severity:

medium

Rule ID:

xccdf_org.ssgproject.content_rule_ensure_iptables_are_flushed

Identifiers:

CCE-92523-0

References:

cis	3.5.2.3

Group IPv6 Group contains 1 group and 7 rules

[ref] The system includes support for Internet Protocol version 6. A major and often-mentioned improvement over IPv4 is its enormous increase in the number of available addresses. Another important feature is its support for automatic configuration of many network settings.

Group Configure IPv6 Settings if Necessary Group contains 7 rules

[ref] A major feature of IPv6 is the extent to which systems implementing it can automatically configure their networking devices using information from the network. From a security perspective, manually configuring important configuration information is preferable to accepting it from the network in an unauthenticated fashion.

Rule Configure Accepting Router Advertisements on All IPv6 Interfaces [ref]

To set the runtime status of the net.ipv6.conf.all.accept_ra kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.all.accept_ra=0

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv6.conf.all.accept_ra = 0

Rationale:

An illicit router advertisement message could result in a man-in-the-middle attack.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra

Identifiers:

CCE-92473-8

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
cui	3.1.20
disa	CCI-000366
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
os-srg	SRG-OS-000480-GPOS-00227
cis	3.3.9

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.all.accept_ra.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92473-8
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_ra

- name: Comment out any occurrences of net.ipv6.conf.all.accept_ra from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.all.accept_ra
    replace: '#net.ipv6.conf.all.accept_ra'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92473-8
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_ra

- name: Comment out any occurrences of net.ipv6.conf.all.accept_ra from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv6.conf.all.accept_ra
    replace: '#net.ipv6.conf.all.accept_ra'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92473-8
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_ra
- name: XCCDF Value sysctl_net_ipv6_conf_all_accept_ra_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_accept_ra_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.accept_ra is set
  sysctl:
    name: net.ipv6.conf.all.accept_ra
    value: '{{ sysctl_net_ipv6_conf_all_accept_ra_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv6_conf_all_accept_ra.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92473-8
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_ra

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.all.accept_ra from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_ra.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_ra" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv6_conf_all_accept_ra.conf'

sysctl_net_ipv6_conf_all_accept_ra_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_ra
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.accept_ra="$sysctl_net_ipv6_conf_all_accept_ra_value"

#
# If net.ipv6.conf.all.accept_ra present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_ra = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_ra")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_ra_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_ra\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_ra\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-92473-8"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable Accepting ICMP Redirects for All IPv6 Interfaces [ref]

To set the runtime status of the net.ipv6.conf.all.accept_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.all.accept_redirects=0

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv6.conf.all.accept_redirects = 0

Rationale:

An illicit ICMP redirect message could result in a man-in-the-middle attack.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_redirects

Identifiers:

CCE-85708-6

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
cui	3.1.20
disa	CCI-000366, CCI-001551
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a), CM-6(b), CM-6.1(iv)
nist-csf	PR.IP-1, PR.PT-3
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040341
cis	3.3.2
anssi	R13
stigref	SV-235020r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.all.accept_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85708-6
  - DISA-STIG-SLES-15-040341
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_redirects

- name: Comment out any occurrences of net.ipv6.conf.all.accept_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.all.accept_redirects
    replace: '#net.ipv6.conf.all.accept_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85708-6
  - DISA-STIG-SLES-15-040341
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_redirects

- name: Comment out any occurrences of net.ipv6.conf.all.accept_redirects from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv6.conf.all.accept_redirects
    replace: '#net.ipv6.conf.all.accept_redirects'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85708-6
  - DISA-STIG-SLES-15-040341
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_redirects
- name: XCCDF Value sysctl_net_ipv6_conf_all_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.accept_redirects is set
  sysctl:
    name: net.ipv6.conf.all.accept_redirects
    value: '{{ sysctl_net_ipv6_conf_all_accept_redirects_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv6_conf_all_accept_redirects.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85708-6
  - DISA-STIG-SLES-15-040341
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_redirects

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.all.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv6_conf_all_accept_redirects.conf'

sysctl_net_ipv6_conf_all_accept_redirects_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.accept_redirects="$sysctl_net_ipv6_conf_all_accept_redirects_value"

#
# If net.ipv6.conf.all.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_redirects = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-85708-6"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfaces [ref]

To set the runtime status of the net.ipv6.conf.all.accept_source_route kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.all.accept_source_route=0

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv6.conf.all.accept_source_route = 0

Rationale:

Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv6 forwarding is enabled and the system is functioning as a router.

Accepting source-routed packets in the IPv6 protocol has few legitimate uses. It should be disabled unless it is absolutely required.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_source_route

Identifiers:

CCE-85649-2

References:

cis-csc	1, 12, 13, 14, 15, 16, 18, 4, 6, 8, 9
cobit5	APO01.06, APO13.01, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.07, DSS06.02
cui	3.1.20
disa	CCI-000366
isa-62443-2009	4.2.3.4, 4.3.3.4, 4.4.3.3
isa-62443-2013	SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	DE.AE-1, ID.AM-3, PR.AC-5, PR.DS-5, PR.PT-4
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040310
cis	3.3.1
anssi	R13
stigref	SV-235015r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.all.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85649-2
  - DISA-STIG-SLES-15-040310
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_source_route

- name: Comment out any occurrences of net.ipv6.conf.all.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.all.accept_source_route
    replace: '#net.ipv6.conf.all.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85649-2
  - DISA-STIG-SLES-15-040310
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_source_route

- name: Comment out any occurrences of net.ipv6.conf.all.accept_source_route from
    /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv6.conf.all.accept_source_route
    replace: '#net.ipv6.conf.all.accept_source_route'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85649-2
  - DISA-STIG-SLES-15-040310
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_source_route
- name: XCCDF Value sysctl_net_ipv6_conf_all_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.accept_source_route is set
  sysctl:
    name: net.ipv6.conf.all.accept_source_route
    value: '{{ sysctl_net_ipv6_conf_all_accept_source_route_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv6_conf_all_accept_source_route.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85649-2
  - DISA-STIG-SLES-15-040310
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_source_route

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.all.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_source_route" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv6_conf_all_accept_source_route.conf'

sysctl_net_ipv6_conf_all_accept_source_route_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.accept_source_route="$sysctl_net_ipv6_conf_all_accept_source_route_value"

#
# If net.ipv6.conf.all.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_source_route = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-85649-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable Kernel Parameter for IPv6 Forwarding [ref]

To set the runtime status of the net.ipv6.conf.all.forwarding kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.all.forwarding=0

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv6.conf.all.forwarding = 0

Rationale:

IP forwarding permits the kernel to forward packets from one network interface to another. The ability to forward packets between two networks is only appropriate for systems acting as routers.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_forwarding

Identifiers:

CCE-85713-6

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9
cobit5	APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06
disa	CCI-000366
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013	A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a), CM-6(b), CM-6.1(iv)
nist-csf	DE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040381
cis	3.2.1
stigref	SV-235025r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.all.forwarding.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85713-6
  - DISA-STIG-SLES-15-040381
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_forwarding

- name: Comment out any occurrences of net.ipv6.conf.all.forwarding from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.all.forwarding
    replace: '#net.ipv6.conf.all.forwarding'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85713-6
  - DISA-STIG-SLES-15-040381
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_forwarding

- name: Comment out any occurrences of net.ipv6.conf.all.forwarding from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv6.conf.all.forwarding
    replace: '#net.ipv6.conf.all.forwarding'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85713-6
  - DISA-STIG-SLES-15-040381
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_forwarding
- name: XCCDF Value sysctl_net_ipv6_conf_all_forwarding_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_forwarding_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.forwarding is set
  sysctl:
    name: net.ipv6.conf.all.forwarding
    value: '{{ sysctl_net_ipv6_conf_all_forwarding_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv6_conf_all_forwarding.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85713-6
  - DISA-STIG-SLES-15-040381
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_forwarding

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.all.forwarding from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.forwarding.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.forwarding" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv6_conf_all_forwarding.conf'

sysctl_net_ipv6_conf_all_forwarding_value='0'


#
# Set runtime for net.ipv6.conf.all.forwarding
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.forwarding="$sysctl_net_ipv6_conf_all_forwarding_value"

#
# If net.ipv6.conf.all.forwarding present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.forwarding = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.forwarding")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_forwarding_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.forwarding\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.forwarding\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-85713-6"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable Accepting Router Advertisements on all IPv6 Interfaces by Default [ref]

To set the runtime status of the net.ipv6.conf.default.accept_ra kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.default.accept_ra=0

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv6.conf.default.accept_ra = 0

Rationale:

An illicit router advertisement message could result in a man-in-the-middle attack.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra

Identifiers:

CCE-92474-6

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
cui	3.1.20
disa	CCI-000366
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
os-srg	SRG-OS-000480-GPOS-00227
cis	3.3.9

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.default.accept_ra.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92474-6
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_ra

- name: Comment out any occurrences of net.ipv6.conf.default.accept_ra from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.default.accept_ra
    replace: '#net.ipv6.conf.default.accept_ra'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92474-6
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_ra

- name: Comment out any occurrences of net.ipv6.conf.default.accept_ra from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv6.conf.default.accept_ra
    replace: '#net.ipv6.conf.default.accept_ra'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92474-6
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_ra
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_ra_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_ra_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_ra is set
  sysctl:
    name: net.ipv6.conf.default.accept_ra
    value: '{{ sysctl_net_ipv6_conf_default_accept_ra_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv6_conf_default_accept_ra.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92474-6
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_ra

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.default.accept_ra from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_ra.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_ra" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv6_conf_default_accept_ra.conf'

sysctl_net_ipv6_conf_default_accept_ra_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_ra
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_ra="$sysctl_net_ipv6_conf_default_accept_ra_value"

#
# If net.ipv6.conf.default.accept_ra present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_ra = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_ra")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_ra_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_ra\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_ra\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-92474-6"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv6 Interfaces [ref]

To set the runtime status of the net.ipv6.conf.default.accept_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.default.accept_redirects=0

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv6.conf.default.accept_redirects = 0

Rationale:

An illicit ICMP redirect message could result in a man-in-the-middle attack.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_redirects

Identifiers:

CCE-85722-7

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
cui	3.1.20
disa	CCI-000366, CCI-001551
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-6(b), CM-6.1(iv)
nist-csf	PR.IP-1, PR.PT-3
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040350
cis	3.3.2
anssi	R13
stigref	SV-235021r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.default.accept_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85722-7
  - DISA-STIG-SLES-15-040350
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_redirects

- name: Comment out any occurrences of net.ipv6.conf.default.accept_redirects from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.default.accept_redirects
    replace: '#net.ipv6.conf.default.accept_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85722-7
  - DISA-STIG-SLES-15-040350
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_redirects

- name: Comment out any occurrences of net.ipv6.conf.default.accept_redirects from
    /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv6.conf.default.accept_redirects
    replace: '#net.ipv6.conf.default.accept_redirects'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85722-7
  - DISA-STIG-SLES-15-040350
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_redirects
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_redirects is set
  sysctl:
    name: net.ipv6.conf.default.accept_redirects
    value: '{{ sysctl_net_ipv6_conf_default_accept_redirects_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv6_conf_default_accept_redirects.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85722-7
  - DISA-STIG-SLES-15-040350
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_redirects

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.default.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv6_conf_default_accept_redirects.conf'

sysctl_net_ipv6_conf_default_accept_redirects_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_redirects="$sysctl_net_ipv6_conf_default_accept_redirects_value"

#
# If net.ipv6.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_redirects = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-85722-7"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default [ref]

To set the runtime status of the net.ipv6.conf.default.accept_source_route kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.default.accept_source_route=0

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv6.conf.default.accept_source_route = 0

Rationale:

Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv6 forwarding is enabled and the system is functioning as a router. Accepting source-routed packets in the IPv6 protocol has few legitimate uses. It should be disabled unless it is absolutely required.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_source_route

Identifiers:

CCE-85653-4

References:

cis-csc	1, 12, 13, 14, 15, 16, 18, 4, 6, 8, 9
cobit5	APO01.06, APO13.01, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.07, DSS06.02
cui	3.1.20
disa	CCI-000366
isa-62443-2009	4.2.3.4, 4.3.3.4, 4.4.3.3
isa-62443-2013	SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-7(a), CM-7(b), CM-6(a), CM-6(b), CM-6.1(iv)
nist-csf	DE.AE-1, ID.AM-3, PR.AC-5, PR.DS-5, PR.PT-4
pcidss	Req-1.4.3
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040321
cis	3.3.1
anssi	R13
pcidss4	1.4.2
stigref	SV-235017r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.default.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85653-4
  - DISA-STIG-SLES-15-040321
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route

- name: Comment out any occurrences of net.ipv6.conf.default.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.default.accept_source_route
    replace: '#net.ipv6.conf.default.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85653-4
  - DISA-STIG-SLES-15-040321
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route

- name: Comment out any occurrences of net.ipv6.conf.default.accept_source_route from
    /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv6.conf.default.accept_source_route
    replace: '#net.ipv6.conf.default.accept_source_route'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85653-4
  - DISA-STIG-SLES-15-040321
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_source_route is set
  sysctl:
    name: net.ipv6.conf.default.accept_source_route
    value: '{{ sysctl_net_ipv6_conf_default_accept_source_route_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv6_conf_default_accept_source_route.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85653-4
  - DISA-STIG-SLES-15-040321
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.default.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_source_route" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv6_conf_default_accept_source_route.conf'

sysctl_net_ipv6_conf_default_accept_source_route_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_source_route="$sysctl_net_ipv6_conf_default_accept_source_route_value"

#
# If net.ipv6.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_source_route = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-85653-4"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Kernel Parameters Which Affect Networking Group contains 2 groups and 16 rules

[ref] The sysctl utility is used to set parameters which affect the operation of the Linux kernel. Kernel parameters which affect networking and have security implications are described here.

Group Network Related Kernel Runtime Parameters for Hosts and Routers Group contains 13 rules

[ref] Certain kernel parameters should be set for systems which are acting as either hosts or routers to improve the system's ability defend against certain types of IPv4 protocol attacks.

Rule Disable Accepting ICMP Redirects for All IPv4 Interfaces [ref]

To set the runtime status of the net.ipv4.conf.all.accept_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.accept_redirects=0

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv4.conf.all.accept_redirects = 0

Rationale:

ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.
This feature of the IPv4 protocol has few legitimate uses. It should be disabled unless absolutely required."

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_redirects

Identifiers:

CCE-85651-8

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9
cjis	5.10.1.1
cobit5	APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06
cui	3.1.20
disa	CCI-000366, CCI-001503, CCI-001551
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013	A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a), SC-7(a)
nist-csf	DE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040330
cis	3.3.2
anssi	R12
stigref	SV-235018r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.accept_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85651-8
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040330
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_redirects

- name: Comment out any occurrences of net.ipv4.conf.all.accept_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.accept_redirects
    replace: '#net.ipv4.conf.all.accept_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85651-8
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040330
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_redirects

- name: Comment out any occurrences of net.ipv4.conf.all.accept_redirects from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.conf.all.accept_redirects
    replace: '#net.ipv4.conf.all.accept_redirects'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85651-8
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040330
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_all_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.accept_redirects is set
  sysctl:
    name: net.ipv4.conf.all.accept_redirects
    value: '{{ sysctl_net_ipv4_conf_all_accept_redirects_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_conf_all_accept_redirects.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85651-8
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040330
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_redirects

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.accept_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_conf_all_accept_redirects.conf'

sysctl_net_ipv4_conf_all_accept_redirects_value='0'


#
# Set runtime for net.ipv4.conf.all.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.accept_redirects="$sysctl_net_ipv4_conf_all_accept_redirects_value"

#
# If net.ipv4.conf.all.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.accept_redirects = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-85651-8"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfaces [ref]

To set the runtime status of the net.ipv4.conf.all.accept_source_route kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.accept_source_route=0

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv4.conf.all.accept_source_route = 0

Rationale:

Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv4 forwarding is enabled and the system is functioning as a router.

Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_source_route

Identifiers:

CCE-85648-4

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cobit5	APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui	3.1.20
disa	CCI-000366
isa-62443-2009	4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nist	CM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a)
nist-csf	DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040300
cis	3.3.1
anssi	R12
stigref	SV-235014r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85648-4
  - DISA-STIG-SLES-15-040300
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_source_route

- name: Comment out any occurrences of net.ipv4.conf.all.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.accept_source_route
    replace: '#net.ipv4.conf.all.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85648-4
  - DISA-STIG-SLES-15-040300
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_source_route

- name: Comment out any occurrences of net.ipv4.conf.all.accept_source_route from
    /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.conf.all.accept_source_route
    replace: '#net.ipv4.conf.all.accept_source_route'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85648-4
  - DISA-STIG-SLES-15-040300
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_source_route
- name: XCCDF Value sysctl_net_ipv4_conf_all_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.accept_source_route is set
  sysctl:
    name: net.ipv4.conf.all.accept_source_route
    value: '{{ sysctl_net_ipv4_conf_all_accept_source_route_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_conf_all_accept_source_route.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85648-4
  - DISA-STIG-SLES-15-040300
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_source_route

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.accept_source_route" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_conf_all_accept_source_route.conf'

sysctl_net_ipv4_conf_all_accept_source_route_value='0'


#
# Set runtime for net.ipv4.conf.all.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.accept_source_route="$sysctl_net_ipv4_conf_all_accept_source_route_value"

#
# If net.ipv4.conf.all.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.accept_source_route = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-85648-4"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Enable Kernel Parameter to Log Martian Packets on all IPv4 Interfaces [ref]

To set the runtime status of the net.ipv4.conf.all.log_martians kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.log_martians=1

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv4.conf.all.log_martians = 1

Rationale:

The presence of "martian" packets (which have impossible addresses) as well as spoofed packets, source-routed packets, and redirects could be a sign of nefarious network activity. Logging these packets enables this activity to be detected.

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_log_martians

Identifiers:

CCE-91222-0

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9
cobit5	APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.04, DSS03.05, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.06
cui	3.1.20
disa	CCI-000126
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013	A.11.2.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.2.1, A.6.2.2, A.9.1.2
nist	CM-7(a), CM-7(b), SC-5(3)(a)
nist-csf	DE.CM-1, PR.AC-3, PR.DS-4, PR.IP-1, PR.PT-3, PR.PT-4
os-srg	SRG-OS-000480-GPOS-00227
cis	3.3.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.log_martians.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91222-0
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_all_log_martians
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.conf.all.log_martians from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.log_martians
    replace: '#net.ipv4.conf.all.log_martians'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91222-0
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_all_log_martians
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.conf.all.log_martians from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.conf.all.log_martians
    replace: '#net.ipv4.conf.all.log_martians'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91222-0
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_all_log_martians
  - unknown_severity
- name: XCCDF Value sysctl_net_ipv4_conf_all_log_martians_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_log_martians_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.log_martians is set
  sysctl:
    name: net.ipv4.conf.all.log_martians
    value: '{{ sysctl_net_ipv4_conf_all_log_martians_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_conf_all_log_martians.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91222-0
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_all_log_martians
  - unknown_severity

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.log_martians from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.log_martians.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.log_martians" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_conf_all_log_martians.conf'

sysctl_net_ipv4_conf_all_log_martians_value='1'


#
# Set runtime for net.ipv4.conf.all.log_martians
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.log_martians="$sysctl_net_ipv4_conf_all_log_martians_value"

#
# If net.ipv4.conf.all.log_martians present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.log_martians = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.log_martians")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_log_martians_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.log_martians\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.log_martians\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-91222-0"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces [ref]

To set the runtime status of the net.ipv4.conf.all.rp_filter kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.rp_filter=1

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv4.conf.all.rp_filter = 1

Rationale:

Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_rp_filter

Identifiers:

CCE-91218-8

References:

cis-csc	1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9
cobit5	APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02
cui	3.1.20
disa	CCI-000366, CCI-001551
isa-62443-2009	4.2.3.4, 4.3.3.4, 4.4.3.3
isa-62443-2013	SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-7(a), CM-7(b), CM-6(a), SC-7(a)
nist-csf	DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4
pcidss	Req-1.4.3
os-srg	SRG-OS-000480-GPOS-00227
cis	3.3.7
anssi	R12
pcidss4	1.4.3

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.rp_filter.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91218-8
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter

- name: Comment out any occurrences of net.ipv4.conf.all.rp_filter from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.rp_filter
    replace: '#net.ipv4.conf.all.rp_filter'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91218-8
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter

- name: Comment out any occurrences of net.ipv4.conf.all.rp_filter from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.conf.all.rp_filter
    replace: '#net.ipv4.conf.all.rp_filter'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91218-8
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter
- name: XCCDF Value sysctl_net_ipv4_conf_all_rp_filter_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_rp_filter_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.rp_filter is set
  sysctl:
    name: net.ipv4.conf.all.rp_filter
    value: '{{ sysctl_net_ipv4_conf_all_rp_filter_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_conf_all_rp_filter.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91218-8
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.rp_filter from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.rp_filter.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.rp_filter" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_conf_all_rp_filter.conf'

sysctl_net_ipv4_conf_all_rp_filter_value='1'


#
# Set runtime for net.ipv4.conf.all.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.rp_filter="$sysctl_net_ipv4_conf_all_rp_filter_value"

#
# If net.ipv4.conf.all.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.rp_filter = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.rp_filter")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_rp_filter_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.rp_filter\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.rp_filter\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-91218-8"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable Kernel Parameter for Accepting Secure ICMP Redirects on all IPv4 Interfaces [ref]

To set the runtime status of the net.ipv4.conf.all.secure_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.secure_redirects=0

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv4.conf.all.secure_redirects = 0

Rationale:

Accepting "secure" ICMP redirects (from those gateways listed as default gateways) has few legitimate uses. It should be disabled unless it is absolutely required.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_secure_redirects

Identifiers:

CCE-91220-4

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cobit5	APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui	3.1.20
disa	CCI-001503, CCI-001551
isa-62443-2009	4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-7(a), CM-7(b), CM-6(a), SC-7(a)
nist-csf	DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
pcidss	Req-1.4.3
os-srg	SRG-OS-000480-GPOS-00227
cis	3.3.3
anssi	R12
pcidss4	1.4.3

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.secure_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91220-4
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_secure_redirects

- name: Comment out any occurrences of net.ipv4.conf.all.secure_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.secure_redirects
    replace: '#net.ipv4.conf.all.secure_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91220-4
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_secure_redirects

- name: Comment out any occurrences of net.ipv4.conf.all.secure_redirects from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.conf.all.secure_redirects
    replace: '#net.ipv4.conf.all.secure_redirects'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91220-4
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_secure_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_all_secure_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_secure_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.secure_redirects is set
  sysctl:
    name: net.ipv4.conf.all.secure_redirects
    value: '{{ sysctl_net_ipv4_conf_all_secure_redirects_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_conf_all_secure_redirects.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91220-4
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_secure_redirects

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.secure_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.secure_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.secure_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_conf_all_secure_redirects.conf'

sysctl_net_ipv4_conf_all_secure_redirects_value='0'


#
# Set runtime for net.ipv4.conf.all.secure_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.secure_redirects="$sysctl_net_ipv4_conf_all_secure_redirects_value"

#
# If net.ipv4.conf.all.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.secure_redirects = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.secure_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_secure_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.secure_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.secure_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-91220-4"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv4 Interfaces [ref]

To set the runtime status of the net.ipv4.conf.default.accept_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.accept_redirects=0

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv4.conf.default.accept_redirects = 0

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_redirects

Identifiers:

CCE-85652-6

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cjis	5.10.1.1
cobit5	APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui	3.1.20
disa	CCI-000366, CCI-001551
isa-62443-2009	4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-7(a), CM-7(b), CM-6(a), SC-7(a)
nist-csf	DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
pcidss	Req-1.4.3
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040340
cis	3.3.3
anssi	R12
pcidss4	1.4.3
stigref	SV-235019r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.accept_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85652-6
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040340
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_redirects

- name: Comment out any occurrences of net.ipv4.conf.default.accept_redirects from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.accept_redirects
    replace: '#net.ipv4.conf.default.accept_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85652-6
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040340
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_redirects

- name: Comment out any occurrences of net.ipv4.conf.default.accept_redirects from
    /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.conf.default.accept_redirects
    replace: '#net.ipv4.conf.default.accept_redirects'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85652-6
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040340
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_default_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.accept_redirects is set
  sysctl:
    name: net.ipv4.conf.default.accept_redirects
    value: '{{ sysctl_net_ipv4_conf_default_accept_redirects_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_conf_default_accept_redirects.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85652-6
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040340
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_redirects

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.accept_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_conf_default_accept_redirects.conf'

sysctl_net_ipv4_conf_default_accept_redirects_value='0'


#
# Set runtime for net.ipv4.conf.default.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.accept_redirects="$sysctl_net_ipv4_conf_default_accept_redirects_value"

#
# If net.ipv4.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_redirects = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-85652-6"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Default [ref]

To set the runtime status of the net.ipv4.conf.default.accept_source_route kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.accept_source_route=0

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv4.conf.default.accept_source_route = 0

Rationale:

Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures.
Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required, such as when IPv4 forwarding is enabled and the system is legitimately functioning as a router.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_source_route

Identifiers:

CCE-85650-0

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cjis	5.10.1.1
cobit5	APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui	3.1.20
disa	CCI-000366, CCI-001551
isa-62443-2009	4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nist	CM-7(a), CM-7(b), SC-5, SC-7(a)
nist-csf	DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040320
cis	3.3.1
anssi	R12
stigref	SV-235016r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85650-0
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040320
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_source_route

- name: Comment out any occurrences of net.ipv4.conf.default.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.accept_source_route
    replace: '#net.ipv4.conf.default.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85650-0
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040320
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_source_route

- name: Comment out any occurrences of net.ipv4.conf.default.accept_source_route from
    /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.conf.default.accept_source_route
    replace: '#net.ipv4.conf.default.accept_source_route'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85650-0
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040320
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_source_route
- name: XCCDF Value sysctl_net_ipv4_conf_default_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.accept_source_route is set
  sysctl:
    name: net.ipv4.conf.default.accept_source_route
    value: '{{ sysctl_net_ipv4_conf_default_accept_source_route_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_conf_default_accept_source_route.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85650-0
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040320
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_source_route

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.accept_source_route" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_conf_default_accept_source_route.conf'

sysctl_net_ipv4_conf_default_accept_source_route_value='0'


#
# Set runtime for net.ipv4.conf.default.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.accept_source_route="$sysctl_net_ipv4_conf_default_accept_source_route_value"

#
# If net.ipv4.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_source_route = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-85650-0"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Enable Kernel Paremeter to Log Martian Packets on all IPv4 Interfaces by Default [ref]

To set the runtime status of the net.ipv4.conf.default.log_martians kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.log_martians=1

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv4.conf.default.log_martians = 1

Rationale:

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_log_martians

Identifiers:

CCE-92482-9

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9
cobit5	APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.04, DSS03.05, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.06
cui	3.1.20
disa	CCI-000126
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013	A.11.2.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.2.1, A.6.2.2, A.9.1.2
nist	CM-7(a), CM-7(b), SC-5(3)(a)
nist-csf	DE.CM-1, PR.AC-3, PR.DS-4, PR.IP-1, PR.PT-3, PR.PT-4
os-srg	SRG-OS-000480-GPOS-00227
cis	3.3.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.log_martians.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92482-9
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_default_log_martians
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.conf.default.log_martians from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.log_martians
    replace: '#net.ipv4.conf.default.log_martians'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92482-9
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_default_log_martians
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.conf.default.log_martians from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.conf.default.log_martians
    replace: '#net.ipv4.conf.default.log_martians'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92482-9
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_default_log_martians
  - unknown_severity
- name: XCCDF Value sysctl_net_ipv4_conf_default_log_martians_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_log_martians_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.log_martians is set
  sysctl:
    name: net.ipv4.conf.default.log_martians
    value: '{{ sysctl_net_ipv4_conf_default_log_martians_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_conf_default_log_martians.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92482-9
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_default_log_martians
  - unknown_severity

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.log_martians from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.log_martians.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.log_martians" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_conf_default_log_martians.conf'

sysctl_net_ipv4_conf_default_log_martians_value='1'


#
# Set runtime for net.ipv4.conf.default.log_martians
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.log_martians="$sysctl_net_ipv4_conf_default_log_martians_value"

#
# If net.ipv4.conf.default.log_martians present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.log_martians = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.log_martians")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_log_martians_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.log_martians\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.log_martians\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-92482-9"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces by Default [ref]

To set the runtime status of the net.ipv4.conf.default.rp_filter kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.rp_filter=1

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv4.conf.default.rp_filter = 1

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_rp_filter

Identifiers:

CCE-91219-6

References:

cis-csc	1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9
cobit5	APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02
cui	3.1.20
disa	CCI-000366
isa-62443-2009	4.2.3.4, 4.3.3.4, 4.4.3.3
isa-62443-2013	SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-7(a), CM-7(b), CM-6(a), SC-7(a)
nist-csf	DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4
os-srg	SRG-OS-000480-GPOS-00227
cis	3.3.7
anssi	R12

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.rp_filter.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91219-6
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_rp_filter

- name: Comment out any occurrences of net.ipv4.conf.default.rp_filter from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.rp_filter
    replace: '#net.ipv4.conf.default.rp_filter'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91219-6
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_rp_filter

- name: Comment out any occurrences of net.ipv4.conf.default.rp_filter from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.conf.default.rp_filter
    replace: '#net.ipv4.conf.default.rp_filter'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91219-6
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_rp_filter
- name: XCCDF Value sysctl_net_ipv4_conf_default_rp_filter_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_rp_filter_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.rp_filter is set
  sysctl:
    name: net.ipv4.conf.default.rp_filter
    value: '{{ sysctl_net_ipv4_conf_default_rp_filter_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_conf_default_rp_filter.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91219-6
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_rp_filter

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.rp_filter from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.rp_filter.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.rp_filter" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_conf_default_rp_filter.conf'

sysctl_net_ipv4_conf_default_rp_filter_value='1'


#
# Set runtime for net.ipv4.conf.default.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.rp_filter="$sysctl_net_ipv4_conf_default_rp_filter_value"

#
# If net.ipv4.conf.default.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.rp_filter = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.rp_filter")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_rp_filter_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.rp_filter\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.rp_filter\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-91219-6"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Configure Kernel Parameter for Accepting Secure Redirects By Default [ref]

To set the runtime status of the net.ipv4.conf.default.secure_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.secure_redirects=0

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv4.conf.default.secure_redirects = 0

Rationale:

Accepting "secure" ICMP redirects (from those gateways listed as default gateways) has few legitimate uses. It should be disabled unless it is absolutely required.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_secure_redirects

Identifiers:

CCE-91221-2

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cobit5	APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui	3.1.20
disa	CCI-001551
isa-62443-2009	4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nist	CM-7(a), CM-7(b), SC-5, SC-7(a)
nist-csf	DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
os-srg	SRG-OS-000480-GPOS-00227
cis	3.3.2
anssi	R12

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.secure_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91221-2
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_secure_redirects

- name: Comment out any occurrences of net.ipv4.conf.default.secure_redirects from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.secure_redirects
    replace: '#net.ipv4.conf.default.secure_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91221-2
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_secure_redirects

- name: Comment out any occurrences of net.ipv4.conf.default.secure_redirects from
    /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.conf.default.secure_redirects
    replace: '#net.ipv4.conf.default.secure_redirects'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91221-2
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_secure_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_default_secure_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_secure_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.secure_redirects is set
  sysctl:
    name: net.ipv4.conf.default.secure_redirects
    value: '{{ sysctl_net_ipv4_conf_default_secure_redirects_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_conf_default_secure_redirects.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91221-2
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_secure_redirects

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.secure_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.secure_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.secure_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_conf_default_secure_redirects.conf'

sysctl_net_ipv4_conf_default_secure_redirects_value='0'


#
# Set runtime for net.ipv4.conf.default.secure_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.secure_redirects="$sysctl_net_ipv4_conf_default_secure_redirects_value"

#
# If net.ipv4.conf.default.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.secure_redirects = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.secure_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_secure_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.secure_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.secure_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-91221-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Enable Kernel Parameter to Ignore ICMP Broadcast Echo Requests on IPv4 Interfaces [ref]

To set the runtime status of the net.ipv4.icmp_echo_ignore_broadcasts kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=1

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv4.icmp_echo_ignore_broadcasts = 1

Rationale:

Responding to broadcast (ICMP) echoes facilitates network mapping and provides a vector for amplification attacks.
Ignoring ICMP echo requests (pings) sent to broadcast or multicast addresses makes the system slightly more difficult to enumerate on the network.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_echo_ignore_broadcasts

Identifiers:

CCE-91243-6

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cjis	5.10.1.1
cobit5	APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui	3.1.20
disa	CCI-000366
isa-62443-2009	4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nist	CM-7(a), CM-7(b), SC-5
nist-csf	DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
pcidss	Req-1.4.3
os-srg	SRG-OS-000480-GPOS-00227
cis	3.3.5
pcidss4	1.4.2

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.icmp_echo_ignore_broadcasts.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91243-6
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts

- name: Comment out any occurrences of net.ipv4.icmp_echo_ignore_broadcasts from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.icmp_echo_ignore_broadcasts
    replace: '#net.ipv4.icmp_echo_ignore_broadcasts'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91243-6
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts

- name: Comment out any occurrences of net.ipv4.icmp_echo_ignore_broadcasts from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.icmp_echo_ignore_broadcasts
    replace: '#net.ipv4.icmp_echo_ignore_broadcasts'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91243-6
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts
- name: XCCDF Value sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value # promote to variable
  set_fact:
    sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.icmp_echo_ignore_broadcasts is set
  sysctl:
    name: net.ipv4.icmp_echo_ignore_broadcasts
    value: '{{ sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_icmp_echo_ignore_broadcasts.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91243-6
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.icmp_echo_ignore_broadcasts from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.icmp_echo_ignore_broadcasts.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.icmp_echo_ignore_broadcasts" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_icmp_echo_ignore_broadcasts.conf'

sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value='1'


#
# Set runtime for net.ipv4.icmp_echo_ignore_broadcasts
#
/sbin/sysctl -q -n -w net.ipv4.icmp_echo_ignore_broadcasts="$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value"

#
# If net.ipv4.icmp_echo_ignore_broadcasts present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_echo_ignore_broadcasts = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.icmp_echo_ignore_broadcasts")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.icmp_echo_ignore_broadcasts\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.icmp_echo_ignore_broadcasts\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-91243-6"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Enable Kernel Parameter to Ignore Bogus ICMP Error Responses on IPv4 Interfaces [ref]

To set the runtime status of the net.ipv4.icmp_ignore_bogus_error_responses kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.icmp_ignore_bogus_error_responses=1

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv4.icmp_ignore_bogus_error_responses = 1

Rationale:

Ignoring bogus ICMP error responses reduces log size, although some activity would not be logged.

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_ignore_bogus_error_responses

Identifiers:

CCE-91224-6

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9
cobit5	APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06
cui	3.1.20
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013	A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2
nerc-cip	CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nist	CM-7(a), CM-7(b), SC-5
nist-csf	DE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3
pcidss	Req-1.4.3
os-srg	SRG-OS-000480-GPOS-00227
cis	3.3.6
anssi	R12
pcidss4	1.4.2

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.icmp_ignore_bogus_error_responses.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91224-6
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.icmp_ignore_bogus_error_responses
    from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.icmp_ignore_bogus_error_responses
    replace: '#net.ipv4.icmp_ignore_bogus_error_responses'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91224-6
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.icmp_ignore_bogus_error_responses
    from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.icmp_ignore_bogus_error_responses
    replace: '#net.ipv4.icmp_ignore_bogus_error_responses'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91224-6
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity
- name: XCCDF Value sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value # promote to variable
  set_fact:
    sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.icmp_ignore_bogus_error_responses is set
  sysctl:
    name: net.ipv4.icmp_ignore_bogus_error_responses
    value: '{{ sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_icmp_ignore_bogus_error_responses.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91224-6
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.icmp_ignore_bogus_error_responses from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.icmp_ignore_bogus_error_responses.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.icmp_ignore_bogus_error_responses" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_icmp_ignore_bogus_error_responses.conf'

sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value='1'


#
# Set runtime for net.ipv4.icmp_ignore_bogus_error_responses
#
/sbin/sysctl -q -n -w net.ipv4.icmp_ignore_bogus_error_responses="$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value"

#
# If net.ipv4.icmp_ignore_bogus_error_responses present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_ignore_bogus_error_responses = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.icmp_ignore_bogus_error_responses")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.icmp_ignore_bogus_error_responses\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.icmp_ignore_bogus_error_responses\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-91224-6"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Enable Kernel Parameter to Use TCP Syncookies on Network Interfaces [ref]

To set the runtime status of the net.ipv4.tcp_syncookies kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.tcp_syncookies=1

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv4.tcp_syncookies = 1

Rationale:

A TCP SYN flood attack can cause a denial of service by filling a system's TCP connection table with connections in the SYN_RCVD state. Syncookies can be used to track a connection when a subsequent ACK is received, verifying the initiator is attempting a valid connection and is not a flood source. This feature is activated when a flood condition is detected, and enables the system to continue servicing valid connection requests.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_syncookies

Identifiers:

CCE-83283-2

References:

cis-csc	1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9
cjis	5.10.1.1
cobit5	APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02
cui	3.1.20
disa	CCI-000366, CCI-001095
isa-62443-2009	4.2.3.4, 4.3.3.4, 4.4.3.3
isa-62443-2013	SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-7(a), CM-7(b), SC-5(1), SC-5(2), SC-5(3)(a), CM-6(a)
nist-csf	DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4
pcidss	Req-1.4.1
os-srg	SRG-OS-000480-GPOS-00227, SRG-OS-000420-GPOS-00186, SRG-OS-000142-GPOS-00071
stigid	SLES-15-010310
cis	3.3.8
anssi	R12
pcidss4	1.4.3
stigref	SV-234829r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.tcp_syncookies.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83283-2
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-010310
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies

- name: Comment out any occurrences of net.ipv4.tcp_syncookies from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.tcp_syncookies
    replace: '#net.ipv4.tcp_syncookies'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83283-2
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-010310
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies

- name: Comment out any occurrences of net.ipv4.tcp_syncookies from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.tcp_syncookies
    replace: '#net.ipv4.tcp_syncookies'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83283-2
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-010310
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies
- name: XCCDF Value sysctl_net_ipv4_tcp_syncookies_value # promote to variable
  set_fact:
    sysctl_net_ipv4_tcp_syncookies_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.tcp_syncookies is set
  sysctl:
    name: net.ipv4.tcp_syncookies
    value: '{{ sysctl_net_ipv4_tcp_syncookies_value }}'
    sysctl_file: /etc/sysctl.d/net_ipv4_tcp_syncookies.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83283-2
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-010310
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.tcp_syncookies from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.tcp_syncookies.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.tcp_syncookies" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_tcp_syncookies.conf'

sysctl_net_ipv4_tcp_syncookies_value='1'


#
# Set runtime for net.ipv4.tcp_syncookies
#
/sbin/sysctl -q -n -w net.ipv4.tcp_syncookies="$sysctl_net_ipv4_tcp_syncookies_value"

#
# If net.ipv4.tcp_syncookies present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.tcp_syncookies = value" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.tcp_syncookies")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_tcp_syncookies_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.tcp_syncookies\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.tcp_syncookies\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83283-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Network Parameters for Hosts Only Group contains 3 rules

[ref] If the system is not going to be used as a router, then setting certain kernel parameters ensure that the host will not perform routing of network traffic.

Rule Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces [ref]

To set the runtime status of the net.ipv4.conf.all.send_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.send_redirects=0

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv4.conf.all.send_redirects = 0

Rationale:

ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table possibly revealing portions of the network topology.
The ability to send ICMP redirects is only appropriate for systems acting as routers.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_send_redirects

Identifiers:

CCE-85655-9

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cjis	5.10.1.1
cobit5	APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui	3.1.20
disa	CCI-000366
isa-62443-2009	4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nist	CM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a)
nist-csf	DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040370
cis	3.2.2
anssi	R12
pcidss4	1.4.5
stigref	SV-235023r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.send_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85655-9
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040370
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4.5
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_send_redirects

- name: Comment out any occurrences of net.ipv4.conf.all.send_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.send_redirects
    replace: '#net.ipv4.conf.all.send_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85655-9
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040370
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4.5
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_send_redirects

- name: Comment out any occurrences of net.ipv4.conf.all.send_redirects from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.conf.all.send_redirects
    replace: '#net.ipv4.conf.all.send_redirects'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85655-9
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040370
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4.5
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_send_redirects

- name: Ensure sysctl net.ipv4.conf.all.send_redirects is set to 0
  sysctl:
    name: net.ipv4.conf.all.send_redirects
    value: '0'
    sysctl_file: /etc/sysctl.d/net_ipv4_conf_all_send_redirects.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85655-9
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040370
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4.5
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_send_redirects

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.send_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.send_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.send_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_conf_all_send_redirects.conf'


#
# Set runtime for net.ipv4.conf.all.send_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.send_redirects="0"

#
# If net.ipv4.conf.all.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.all.send_redirects = 0" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.send_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.send_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.send_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-85655-9"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Default [ref]

To set the runtime status of the net.ipv4.conf.default.send_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.send_redirects=0

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv4.conf.default.send_redirects = 0

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_send_redirects

Identifiers:

CCE-85654-2

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9
cjis	5.10.1.1
cobit5	APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06
cui	3.1.20
disa	CCI-000366
isa-62443-2009	4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nist	CM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a)
nist-csf	DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040360
cis	3.2.2
anssi	R12
pcidss4	1.4.5
stigref	SV-235022r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.send_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85654-2
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040360
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4.5
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_send_redirects

- name: Comment out any occurrences of net.ipv4.conf.default.send_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.send_redirects
    replace: '#net.ipv4.conf.default.send_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85654-2
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040360
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4.5
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_send_redirects

- name: Comment out any occurrences of net.ipv4.conf.default.send_redirects from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.conf.default.send_redirects
    replace: '#net.ipv4.conf.default.send_redirects'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85654-2
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040360
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4.5
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_send_redirects

- name: Ensure sysctl net.ipv4.conf.default.send_redirects is set to 0
  sysctl:
    name: net.ipv4.conf.default.send_redirects
    value: '0'
    sysctl_file: /etc/sysctl.d/net_ipv4_conf_default_send_redirects.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85654-2
  - CJIS-5.10.1.1
  - DISA-STIG-SLES-15-040360
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4.5
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_send_redirects

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.send_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.send_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.send_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_conf_default_send_redirects.conf'


#
# Set runtime for net.ipv4.conf.default.send_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.send_redirects="0"

#
# If net.ipv4.conf.default.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.default.send_redirects = 0" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.send_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.send_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.send_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-85654-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable Kernel Parameter for IP Forwarding on IPv4 Interfaces [ref]

To set the runtime status of the net.ipv4.ip_forward kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.ip_forward=0

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

net.ipv4.ip_forward = 0

Warning: Certain technologies such as virtual machines, containers, etc. rely on IPv4 forwarding to enable and use networking. Disabling IPv4 forwarding would cause those technologies to stop working. Therefore, this rule should not be used in profiles or benchmarks that target usage of IPv4 forwarding.

Rationale:

Routing protocol daemons are typically used on routers to exchange network topology information with other routers. If this capability is used when not required, system network information may be unnecessarily transmitted across the network.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_ip_forward

Identifiers:

CCE-85709-4

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9
cobit5	APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06
cui	3.1.20
disa	CCI-000366
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6
iso27001-2013	A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2
nerc-cip	CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1
nist	CM-6(b), CM-6.1(iv)
nist-csf	DE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3, PR.PT-4
pcidss	Req-1.3.1, Req-1.3.2
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040380
cis	3.2.1
anssi	R12
pcidss4	1.4.3
stigref	SV-235024r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*net.ipv4.ip_forward.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85709-4
  - DISA-STIG-SLES-15-040380
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_ip_forward

- name: Comment out any occurrences of net.ipv4.ip_forward from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.ip_forward
    replace: '#net.ipv4.ip_forward'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85709-4
  - DISA-STIG-SLES-15-040380
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_ip_forward

- name: Comment out any occurrences of net.ipv4.ip_forward from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*net.ipv4.ip_forward
    replace: '#net.ipv4.ip_forward'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85709-4
  - DISA-STIG-SLES-15-040380
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_ip_forward

- name: Ensure sysctl net.ipv4.ip_forward is set to 0
  sysctl:
    name: net.ipv4.ip_forward
    value: '0'
    sysctl_file: /etc/sysctl.d/net_ipv4_ip_forward.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85709-4
  - DISA-STIG-SLES-15-040380
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - PCI-DSSv4-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_ip_forward

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.ip_forward from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.ip_forward.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.ip_forward" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/net_ipv4_ip_forward.conf'


#
# Set runtime for net.ipv4.ip_forward
#
/sbin/sysctl -q -n -w net.ipv4.ip_forward="0"

#
# If net.ipv4.ip_forward present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.ip_forward = 0" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.ip_forward")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.ip_forward\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.ip_forward\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-85709-4"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group nftables Group contains 10 rules

[ref]

If firewalld or iptables are being used in your environment, please follow the guidance in their
respective section and pass-over the guidance in this section.

nftables is a subsystem of the Linux kernel providing filtering and classification of network packets/datagrams/frames and is the successor to iptables. The biggest change with the successor nftables is its simplicity. With iptables, we have to configure every single rule and use the syntax which can be compared with normal commands. With nftables, the simpler syntax, much like BPF (Berkely Packet Filter) means shorter lines and less repetition. Support for nftables should also be compiled into the kernel, together with the related nftables modules.

It is available in Linux kernels >= 3.13. Please ensure that your kernel supports nftables before choosing this option.

Rule Install nftables Package [ref]

nftables provides a new in-kernel packet classification framework that is based on a network-specific Virtual Machine (VM) and a new nft userspace command line tool. nftables reuses the existing Netfilter subsystems such as the existing hook infrastructure, the connection tracking system, NAT, userspace queuing and logging subsystem. The nftables package can be installed with the following command:

$ sudo zypper install nftables

Rationale:

nftables is a subsystem of the Linux kernel that can protect against threats originating from within a corporate network to include malicious mobile code and poorly configured software on a host.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_nftables_installed

Identifiers:

CCE-92469-6

References:

cis	3.5.2.1
pcidss4	1.2.1

Remediation OSBuild Blueprint snippet ⇲


[[packages]]
name = "nftables"
version = "*"

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

- name: Ensure nftables is installed
  package:
    name: nftables
    state: present
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] )
  tags:
  - CCE-92469-6
  - PCI-DSSv4-1.2.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_nftables_installed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include install_nftables

class install_nftables {
  package { 'nftables':
    ensure => 'installed',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] ); then

zypper install -y "nftables"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Uninstall nftables package [ref]

nftables is a subsystem of the Linux kernel providing filtering and classification of network packets/datagrams/frames and is the successor to iptables. The nftables package can be removed with the following command:

$ sudo zypper remove nftables

Rationale:

Running both firewalld and nftables may lead to conflict.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_nftables_removed

Identifiers:

CCE-92518-0

References:

cis	3.5.1.2, 3.5.3.1.2

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure nftables is removed
  package:
    name: nftables
    state: absent
  tags:
  - CCE-92518-0
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_nftables_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_nftables

class remove_nftables {
  package { 'nftables':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove nftables
#	   from the system, and may remove any packages
#	   that depend on nftables. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "nftables"

Rule Verify nftables Service is Enabled [ref]

The nftables service allows for the loading of nftables rulesets during boot, or starting on the nftables service The nftables service can be enabled with the following command:

$ sudo systemctl enable nftables.service

Rationale:

The nftables service restores the nftables rules from the rules files referenced in the /etc/sysconfig/nftables.conf file during boot or the starting of the nftables service

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_service_nftables_enabled

Identifiers:

CCE-92560-2

References:

cis	3.5.2.9

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
enabled = ["nftables"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92560-2
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_nftables_enabled

- name: Verify nftables Service is Enabled - Enable service nftables
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Verify nftables Service is Enabled - Enable Service nftables
    ansible.builtin.systemd:
      name: nftables
      enabled: true
      state: started
      masked: false
    when:
    - '"nftables" in ansible_facts.packages'
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "nftables" in ansible_facts.packages )
  tags:
  - CCE-92560-2
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_nftables_enabled

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include enable_nftables

class enable_nftables {
  service {'nftables':
    enable => true,
    ensure => 'running',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q nftables ); then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'nftables.service'
"$SYSTEMCTL_EXEC" start 'nftables.service'
"$SYSTEMCTL_EXEC" enable 'nftables.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify nftables Service is Disabled [ref]

nftables is a subsystem of the Linux kernel providing filtering and classification of network packets/datagrams/frames and is the successor to iptables. The nftables service can be disabled with the following command:

systemctl disable nftables

Rationale:

Running both firewalld and nftables may lead to conflict. nftables is actually one of the backends for firewalld management tools.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_service_nftables_disabled

Identifiers:

CCE-92529-7

References:

cis	3.5.1.2
pcidss4	1.2.1

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
masked = ["nftables"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92529-7
  - PCI-DSSv4-1.2.1
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_nftables_disabled

- name: Verify nftables Service is Disabled - Collect systemd Services Present in
    the System
  ansible.builtin.command: systemctl -q list-unit-files --type service
  register: service_exists
  changed_when: false
  failed_when: service_exists.rc not in [0, 1]
  check_mode: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "firewalld" in ansible_facts.packages and "nftables" in ansible_facts.packages
    )
  tags:
  - CCE-92529-7
  - PCI-DSSv4-1.2.1
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_nftables_disabled

- name: Verify nftables Service is Disabled - Ensure nftables.service is Masked
  ansible.builtin.systemd:
    name: nftables.service
    state: stopped
    enabled: false
    masked: true
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "firewalld" in ansible_facts.packages and "nftables" in ansible_facts.packages
    )
  - service_exists.stdout_lines is search("nftables.service", multiline=True)
  tags:
  - CCE-92529-7
  - PCI-DSSv4-1.2.1
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_nftables_disabled

- name: Unit Socket Exists - nftables.socket
  ansible.builtin.command: systemctl -q list-unit-files nftables.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "firewalld" in ansible_facts.packages and "nftables" in ansible_facts.packages
    )
  tags:
  - CCE-92529-7
  - PCI-DSSv4-1.2.1
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_nftables_disabled

- name: Verify nftables Service is Disabled - Disable Socket nftables
  ansible.builtin.systemd:
    name: nftables.socket
    enabled: false
    state: stopped
    masked: true
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "firewalld" in ansible_facts.packages and "nftables" in ansible_facts.packages
    )
  - socket_file_exists.stdout_lines is search("nftables.socket", multiline=True)
  tags:
  - CCE-92529-7
  - PCI-DSSv4-1.2.1
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_nftables_disabled

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include disable_nftables

class disable_nftables {
  service {'nftables':
    enable => false,
    ensure => 'stopped',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q firewalld && rpm --quiet -q nftables ); then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'nftables.service'
"$SYSTEMCTL_EXEC" disable 'nftables.service'
"$SYSTEMCTL_EXEC" mask 'nftables.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files nftables.socket; then
    "$SYSTEMCTL_EXEC" stop 'nftables.socket'
    "$SYSTEMCTL_EXEC" mask 'nftables.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'nftables.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure nftables Default Deny Firewall Policy [ref]

Base chain policy is the default verdict that will be applied to packets reaching the end of the chain. There are two policies: accept (Default) and drop. If the policy is set to accept, the firewall will accept any packet that is not configured to be denied and the packet will continue traversing the network stack.

Warning: Changing firewall settings while connected over network can result in being locked out of the system.

Rationale:

It is easier to allow acceptable usage than to block unacceptable usage.

Severity:

medium

Rule ID:

xccdf_org.ssgproject.content_rule_nftables_ensure_default_deny_policy

Identifiers:

CCE-92507-3

References:

cis	3.5.2.8
pcidss4	1.3.1

Rule Ensure nftables Rules are Permanent [ref]

nftables is a subsystem of the Linux kernel providing filtering and classification of network packets/datagrams/frames. The nftables service reads the /etc/sysconfig/nftables.conf file for a nftables file or files to include in the nftables ruleset. A nftables ruleset containing the input, forward, and output base chains allow network traffic to be filtered.

Rationale:

Changes made to nftables ruleset only affect the live system, you will also need to configure the nftables ruleset to apply on boot

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_nftables_rules_permanent

Identifiers:

CCE-92485-2

References:

cis	3.5.2.10

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92485-2
  - low_complexity
  - low_disruption
  - medium_severity
  - nftables_rules_permanent
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_nftables_master_config_file # promote to variable
  set_fact:
    var_nftables_master_config_file: !!str /etc/sysconfig/nftables.conf
  tags:
    - always

- name: Check the top-level configuration file exists
  ansible.builtin.stat:
    path: '{{ var_nftables_master_config_file }}'
  when: ( "nftables" in ansible_facts.packages )
  tags:
  - CCE-92485-2
  - low_complexity
  - low_disruption
  - medium_severity
  - nftables_rules_permanent
  - no_reboot_needed
  - restrict_strategy

- name: Check the  relevant file is included configuration
  ansible.builtin.lineinfile:
    path: '{{ var_nftables_master_config_file }}'
    line: include "/etc/nftables/{{ item }}-filter"
    create: true
  loop:
  - bridge
  - arp
  - inet
  when: ( "nftables" in ansible_facts.packages )
  tags:
  - CCE-92485-2
  - low_complexity
  - low_disruption
  - medium_severity
  - nftables_rules_permanent
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if ( rpm --quiet -q nftables ); then

var_nftables_master_config_file='/etc/sysconfig/nftables.conf'


if [ ! -f "${var_nftables_master_config_file}" ]; then
    touch "${var_nftables_master_config_file}"
fi


grep -qxF 'include "/etc/nftables/bridge-filter"' "${var_nftables_master_config_file}" \
    || echo 'include "/etc/nftables/bridge-filter"' >> "${var_nftables_master_config_file}"

grep -qxF 'include "/etc/nftables/arp-filter"' "${var_nftables_master_config_file}" \
    || echo 'include "/etc/nftables/arp-filter"' >> "${var_nftables_master_config_file}"

grep -qxF 'include "/etc/nftables/inet-filter"' "${var_nftables_master_config_file}" \
    || echo 'include "/etc/nftables/inet-filter"' >> "${var_nftables_master_config_file}"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure Base Chains Exist for Nftables [ref]

Tables in nftables hold chains. Each table only has one address family and only applies to packets of this family. Tables can have one of six families. Chains are containers for rules. They exist in two kinds, base chains and regular chains. A base chain is an entry point for packets from the networking stack, a regular chain may be used as jump target and is used for better rule organization.

Warning: Configuring rules over ssh, by creating a base chain with policy drop will cause loss of connectivity. Ensure that a rule allowing ssh has been added to the base chain prior to setting the base cahin's policy to drop

Rationale:

If a base chain doesn't exist with a hook for input, forward, and delete, packets that would flow through those chains will not be touched by nftables.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_set_nftables_base_chain

Identifiers:

CCE-92578-4

References:

cis	3.5.2.5

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92578-4
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_base_chain
- name: XCCDF Value var_nftables_table # promote to variable
  set_fact:
    var_nftables_table: !!str filter
  tags:
    - always
- name: XCCDF Value var_nftables_family # promote to variable
  set_fact:
    var_nftables_family: !!str inet
  tags:
    - always
- name: XCCDF Value var_nftables_base_chain_names # promote to variable
  set_fact:
    var_nftables_base_chain_names: !!str input,forward,output
  tags:
    - always
- name: XCCDF Value var_nftables_base_chain_types # promote to variable
  set_fact:
    var_nftables_base_chain_types: !!str filter,filter,filter
  tags:
    - always
- name: XCCDF Value var_nftables_base_chain_hooks # promote to variable
  set_fact:
    var_nftables_base_chain_hooks: !!str input,forward,output
  tags:
    - always
- name: XCCDF Value var_nftables_base_chain_priorities # promote to variable
  set_fact:
    var_nftables_base_chain_priorities: !!str 0,0,0
  tags:
    - always
- name: XCCDF Value var_nftables_base_chain_policies # promote to variable
  set_fact:
    var_nftables_base_chain_policies: !!str accept,accept,accept
  tags:
    - always

- name: Ensure Base Chains Exist for Nftables - Check Existence of Nftables Table
  ansible.builtin.shell: nft list tables | grep '{{ var_nftables_family }} {{ var_nftables_table
    }}'
  register: existing_nftables
  changed_when: false
  failed_when: false
  when: '"nftables" in ansible_facts.packages'
  tags:
  - CCE-92578-4
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_base_chain

- name: Ensure Base Chains Exist for Nftables - Set NFTables Table
  ansible.builtin.command: nft create table {{ var_nftables_family }} {{ var_nftables_table
    }}
  when:
  - '"nftables" in ansible_facts.packages'
  - existing_nftables is not skipped and existing_nftables.rc > 0
  tags:
  - CCE-92578-4
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_base_chain

- name: Ensure Base Chains Exist for Nftables - Add Base Chains
  ansible.builtin.command: nft 'add chain {{ var_nftables_family }} {{ var_nftables_table
    }} {{ item.0 }} { type {{ item.1 }} hook {{ item.2 }} priority {{ item.3 }} ;
    policy {{ item.4 }} ; }'
  with_together:
  - '{{ var_nftables_base_chain_names.split(",") }}'
  - '{{ var_nftables_base_chain_types.split(",") }}'
  - '{{ var_nftables_base_chain_hooks.split(",") }}'
  - '{{ var_nftables_base_chain_priorities.split(",") }}'
  - '{{ var_nftables_base_chain_policies.split(",") }}'
  when: '"nftables" in ansible_facts.packages'
  tags:
  - CCE-92578-4
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_base_chain

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if rpm --quiet -q nftables; then

#Name of the table
var_nftables_table='filter'

#Familiy of the table 
var_nftables_family='inet'

#Name(s) of base chain
var_nftables_base_chain_names='input,forward,output'

#Type(s) of base chain
var_nftables_base_chain_types='filter,filter,filter'

# Hooks for base chain
var_nftables_base_chain_hooks='input,forward,output'

#Priority
var_nftables_base_chain_priorities='0,0,0'

#Policy 
var_nftables_base_chain_policies='accept,accept,accept'


#Transfer some of strings to arrays
IFS="," read -r -a  names <<< "$var_nftables_base_chain_names"
IFS="," read -r -a  types <<< "$var_nftables_base_chain_types"
IFS="," read -r -a  hooks <<< "$var_nftables_base_chain_hooks"
IFS="," read -r -a  priorities <<< "$var_nftables_base_chain_priorities"
IFS="," read -r -a  policies <<< "$var_nftables_base_chain_policies"

my_cmd="nft list tables | grep '$var_nftables_family $var_nftables_table'"
eval IS_TABLE_EXIST=\$\($my_cmd\)
if [ -z "$IS_TABLE_EXIST" ]
then
  # We create a table and add chains to it 
  nft create table "$var_nftables_family" "$var_nftables_table"
  num_of_chains=${#names[@]}
  for ((i=0; i < num_of_chains; i++))
  do
   chain_to_add="add chain $var_nftables_family $var_nftables_table ${names[$i]} { type ${types[$i]} hook ${hooks[$i]} priority ${priorities[$i]} ; policy ${policies[$i]} ; }"
   my_cmd="nft '$chain_to_add'"
   eval $my_cmd
  done    
else
  # We add missing chains to the existing table
  num_of_chains=${#names[@]}
  for ((i=0; i < num_of_chains; i++))
  do
    IS_CHAIN_EXIST=$(nft list table "$var_nftables_family" "$var_nftables_table" | grep "hook ${hooks[$i]}")
    if [ -z "$IS_CHAIN_EXIST" ]
      then
        chain_to_add="add chain '$var_nftables_family' '$var_nftables_table' ${names[$i]} { type ${types[$i]} hook ${hooks[$i]} priority ${priorities[$i]} ; policy ${policies[$i]} ; }"
        my_cmd="nft '$chain_to_add'"
        eval $my_cmd
    fi
  done 
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Set nftables Configuration for Loopback Traffic [ref]

Configure the loopback interface to accept traffic. Configure all other interfaces to deny traffic to the loopback network.

Warning: Changing firewall settings while connected over network can result in being locked out of the system. Keep in mind the remediation makes changes only to the running system, in order to keep the changes need to take care to save the nft settings to the relvant configutation files.

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_set_nftables_loopback_traffic

Identifiers:

CCE-92481-1

References:

pcidss	Req-1.4.1
cis	3.5.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92481-1
  - PCI-DSS-Req-1.4.1
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_loopback_traffic

- name: Implement Loopback Rules
  ansible.builtin.command: nft add rule inet filter input iif lo accept
  when: ( "nftables" in ansible_facts.packages )
  tags:
  - CCE-92481-1
  - PCI-DSS-Req-1.4.1
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_loopback_traffic

- name: Create Rule to Drop Input IP Address from Loopback
  ansible.builtin.command: nft add rule inet filter input ip saddr 127.0.0.0/8 counter
    drop
  when: ( "nftables" in ansible_facts.packages )
  tags:
  - CCE-92481-1
  - PCI-DSS-Req-1.4.1
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_loopback_traffic

- name: Check if IPv6 is Disabled in grub Configuration
  ansible.builtin.shell: |
    [ -z "$(grep "^\s*linux" /boot/grub2/grub.cfg | grep -v ipv6.disabled=1)" ]
  register: ipv6_status
  when: ( "nftables" in ansible_facts.packages )
  tags:
  - CCE-92481-1
  - PCI-DSS-Req-1.4.1
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_loopback_traffic

- name: Check sysctl value of net.ipv6.conf.all.disable_ipv6
  sysctl:
    name: net.ipv6.conf.all.disable_ipv6
    state: present
    value: '1'
  check_mode: true
  register: sysctl_ipv6_all
  when: ( "nftables" in ansible_facts.packages )
  tags:
  - CCE-92481-1
  - PCI-DSS-Req-1.4.1
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_loopback_traffic

- name: Check sysctl value of net.ipv6.conf.default.disable_ipv6
  sysctl:
    name: net.ipv6.conf.default.disable_ipv6
    state: present
    value: '1'
  check_mode: true
  register: sysctl_ipv6_default
  when: ( "nftables" in ansible_facts.packages )
  tags:
  - CCE-92481-1
  - PCI-DSS-Req-1.4.1
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_loopback_traffic

- name: Implement IPv6 loopback rules
  ansible.builtin.command: nft add rule inet filter input ip6 saddr ::1 counter drop
  when:
  - ( "nftables" in ansible_facts.packages )
  - ipv6_status is not skipped
  - sysctl_ipv6_default is not skipped
  - sysctl_ipv6_all is not skipped
  - ipv6_status.rc == 0 or sysctl_ipv6_all.found > 0 or sysctl_ipv6_default.found
    > 0
  tags:
  - CCE-92481-1
  - PCI-DSS-Req-1.4.1
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_loopback_traffic

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if ( rpm --quiet -q nftables ); then

grubfile="/boot/grub2/grub.cfg"

# Implement the loopback rules:
nft add rule inet filter input iif lo accept
nft add rule inet filter input ip saddr 127.0.0.0/8 counter drop

# Check IPv6 is disabled, if false implement IPv6 loopback rules
disabled="false"
[ -f "$grubfile" ] && ! grep "^\s*linux" "$grubfile" | grep -vq "ipv6.disable=1" && disabled="true"

grep -Eq "^\s*net\.ipv6\.conf\.all\.disable_ipv6\s*=\s*1\b(\s+#.*)?$" \
/etc/sysctl.conf /etc/sysctl.d/*.conf && \
grep -Eq "^\s*net\.ipv6\.conf\.default\.disable_ipv6\s*=\s*1\b(\s+#.*)?$" \
/etc/sysctl.conf /etc/sysctl.d/*.conf && sysctl net.ipv6.conf.all.disable_ipv6 | \
grep -Eq "^\s*net\.ipv6\.conf\.all\.disable_ipv6\s*=\s*1\b(\s+#.*)?$" && \
sysctl net.ipv6.conf.default.disable_ipv6 | \
grep -Eq "^\s*net\.ipv6\.conf\.default\.disable_ipv6\s*=\s*1\b(\s+#.*)?$" && disabled="true"

# Is IPv6 Disabled? (true/false)
if [ "$disabled" = false ] ; then
    nft add rule inet filter input ip6 saddr ::1 counter drop
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure all outbound and established connections are configured for nftables [ref]

Configure the nftables firewall rules for new outbound and established connections

Rationale:

If rules are not in place for new outbound and established connections, all packets will be dropped by the default policy preventing network usage.

Severity:

medium

Rule ID:

xccdf_org.ssgproject.content_rule_set_nftables_new_connections

Identifiers:

CCE-92564-4

References:

cis	3.5.2.7

Rule Ensure a Table Exists for Nftables [ref]

Tables in nftables hold chains. Each table only has one address family and only applies to packets of this family. Tables can have one of six families.

Warning: Adding rules to a running nftables can cause loss of connectivity to the system.

Rationale:

Nftables doesn't have any default tables. Without a table being built, nftables will not filter network traffic. Note: adding rules to a running nftables can cause loss of connectivity to the system.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_set_nftables_table

Identifiers:

CCE-92569-3

References:

cis	3.5.2.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92569-3
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_table
- name: XCCDF Value var_nftables_family # promote to variable
  set_fact:
    var_nftables_family: !!str inet
  tags:
    - always
- name: XCCDF Value var_nftables_table # promote to variable
  set_fact:
    var_nftables_table: !!str filter
  tags:
    - always

- name: Collect Existing Nftables
  ansible.builtin.command: nft list tables
  register: existing_nftables
  when: '"nftables" in ansible_facts.packages'
  tags:
  - CCE-92569-3
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_table

- name: Set Nftable Table
  ansible.builtin.command: nft create table {{ var_nftables_family }} {{ var_nftables_table
    }}
  when:
  - '"nftables" in ansible_facts.packages'
  - existing_nftables is not skipped
  - existing_nftables.stdout_lines | length == 0
  tags:
  - CCE-92569-3
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_table

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q nftables; then

#Set nftables family name
var_nftables_family='inet'


#Set nftables table name
var_nftables_table='filter'


IS_TABLE=$(nft list tables)
if [ -z "$IS_TABLE" ]
then
  nft create table "$var_nftables_family" "$var_nftables_table"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Wireless Networking Group contains 1 group and 1 rule

[ref] Wireless networking, such as 802.11 (WiFi) and Bluetooth, can present a security risk to sensitive or classified systems and networks. Wireless networking hardware is much more likely to be included in laptop or portable systems than in desktops or servers.

Removal of hardware provides the greatest assurance that the wireless capability remains disabled. Acquisition policies often include provisions to prevent the purchase of equipment that will be used in sensitive spaces and includes wireless capabilities. If it is impractical to remove the wireless hardware, and policy permits the device to enter sensitive spaces as long as wireless is disabled, efforts should instead focus on disabling wireless capability via software.

Group Disable Wireless Through Software Configuration Group contains 1 rule

[ref] If it is impossible to remove the wireless hardware from the device in question, disable as much of it as possible through software. The following methods can disable software support for wireless networking, but note that these methods do not prevent malicious software or careless users from re-activating the devices.

Rule Deactivate Wireless Network Interfaces [ref]

Deactivating wireless network interfaces should prevent normal usage of the wireless capability.

Configure the system to disable wireless network interfaces by issuing the following command for every active <WIFI-INTERFACE> in the system:

$ sudo wicked ifdown <WIFI-INTERFACE>

Also remove the configuration files for every wifi adapter from /etc/wicked/ifconfig/<WIFI-INTERFACE>.xml to prevent future connections.

Rationale:

The use of wireless networking can introduce many different attack vectors into the organization's network. Common attack vectors such as malicious association and ad hoc networks will allow an attacker to spoof a wireless access point (AP), allowing validated systems to connect to the malicious AP and enabling the attacker to monitor and record network traffic. These malicious APs can also serve to create a man-in-the-middle attack or be used to create a denial of service to valid network resources.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_wireless_disable_interfaces

Identifiers:

CCE-83286-5

References:

cis-csc	11, 12, 14, 15, 3, 8, 9
cobit5	APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06
cui	3.1.16
disa	CCI-000085, CCI-002418, CCI-002421, CCI-001443, CCI-001444
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
ism	1315, 1319
iso27001-2013	A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2
nist	AC-18(a), AC-18(3), CM-7(a), CM-7(b), CM-6(a), MP-7
nist-csf	PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4
pcidss	Req-1.3.3
os-srg	SRG-OS-000299-GPOS-00117, SRG-OS-000300-GPOS-00118, SRG-OS-000424-GPOS-00188, SRG-OS-000481-GPOS-000481
stigid	SLES-15-010380
cis	3.1.2
pcidss4	1.3.3
stigref	SV-234847r854193_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	false
Strategy:	unknown

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83286-5
  - DISA-STIG-SLES-15-010380
  - NIST-800-171-3.1.16
  - NIST-800-53-AC-18(3)
  - NIST-800-53-AC-18(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - PCI-DSS-Req-1.3.3
  - PCI-DSSv4-1.3.3
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy
  - wireless_disable_interfaces

- name: Service facts
  ansible.builtin.service_facts: null
  tags:
  - CCE-83286-5
  - DISA-STIG-SLES-15-010380
  - NIST-800-171-3.1.16
  - NIST-800-53-AC-18(3)
  - NIST-800-53-AC-18(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - PCI-DSS-Req-1.3.3
  - PCI-DSSv4-1.3.3
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy
  - wireless_disable_interfaces

- name: Wicked Deactivate Wireless Network Interfaces
  command: wicked ifdown {{ item }}
  loop: '{{ ansible_facts.interfaces }}'
  when:
  - ansible_facts.services['wickedd.service'].state == 'running'
  - item.startswith("wl")
  tags:
  - CCE-83286-5
  - DISA-STIG-SLES-15-010380
  - NIST-800-171-3.1.16
  - NIST-800-53-AC-18(3)
  - NIST-800-53-AC-18(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - PCI-DSS-Req-1.3.3
  - PCI-DSSv4-1.3.3
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy
  - wireless_disable_interfaces

- name: Wicked Disable Wireless Network Interfaces
  lineinfile:
    path: /etc/sysconfig/network/ifcfg-{{ item }}
    regexp: ^STARTMODE=
    line: STARTMODE=off
  loop: '{{ ansible_facts.interfaces }}'
  when:
  - ansible_facts.services['wickedd.service'].state == 'running'
  - item.startswith("wl")
  tags:
  - CCE-83286-5
  - DISA-STIG-SLES-15-010380
  - NIST-800-171-3.1.16
  - NIST-800-53-AC-18(3)
  - NIST-800-53-AC-18(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - PCI-DSS-Req-1.3.3
  - PCI-DSSv4-1.3.3
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy
  - wireless_disable_interfaces

- name: NetworkManager Deactivate Wireless Network Interfaces
  command: nmcli radio wifi off
  when:
  - '''NetworkManager'' in ansible_facts.packages'
  - ansible_facts.services['NetworkManager.service'].state == 'running'
  tags:
  - CCE-83286-5
  - DISA-STIG-SLES-15-010380
  - NIST-800-171-3.1.16
  - NIST-800-53-AC-18(3)
  - NIST-800-53-AC-18(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - PCI-DSS-Req-1.3.3
  - PCI-DSSv4-1.3.3
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy
  - wireless_disable_interfaces

Remediation Shell script ⇲


zypper install -y "NetworkManager"

if command -v nmcli >/dev/null 2>&1 && systemctl is-active NetworkManager >/dev/null 2>&1; then
    nmcli radio all off
fi

if command -v wicked >/dev/null 2>&1 && systemctl is-active wickedd >/dev/null 2>&1; then
  if [ -n "$(find /sys/class/net/*/ -type d -name wireless)" ]; then
    interfaces=$(find /sys/class/net/*/wireless -type d -name wireless | xargs -0 dirname | xargs basename)
    for iface in $interfaces; do
      wicked ifdown $iface
      sed -i 's/STARTMODE=.*/STARTMODE=off/' /etc/sysconfig/network/ifcfg-$iface
    done
  fi
fi

Group File Permissions and Masks Group contains 8 groups and 52 rules

[ref] Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which they should not have access.

Several of the commands in this section search filesystems for files or directories with certain characteristics, and are intended to be run on every local partition on a given system. When the variable PART appears in one of the commands below, it means that the command is intended to be run repeatedly, with the name of each local partition substituted for PART in turn.

The following command prints a list of all xfs partitions on the local system, which is the default filesystem for SUSE Linux Enterprise 15 installations:

$ mount -t xfs | awk '{print $3}'

For any systems that use a different local filesystem type, modify this command as appropriate.

Group Verify Permissions on Important Files and Directories Group contains 1 group and 29 rules

[ref] Permissions for many files on a system must be set restrictively to ensure sensitive information is properly protected. This section discusses important permission restrictions which can be verified to ensure that no harmful discrepancies have arisen.

Group Verify Permissions on Files with Local Account Information and Credentials Group contains 24 rules

[ref] The default restrictive permissions for files which act as important security databases such as passwd, shadow, group, and gshadow files must be maintained. Many utilities need read access to the passwd file in order to function properly, but read access to the shadow file allows malicious attacks against system passwords, and should never be enabled.

Rule Verify Group Who Owns Backup group File [ref]

To properly set the group owner of /etc/group-, run the command:

$ sudo chgrp root /etc/group-

Rationale:

The /etc/group- file is a backup file of /etc/group, and as such, it contains information regarding groups that are configured on the system. Protection of this file is important for system security.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_group

Identifiers:

CCE-91329-3

References:

disa	CCI-002223
nist	AC-6 (1)
pcidss	Req-8.7
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.7
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/group-
  stat:
    path: /etc/group-
  register: file_exists
  tags:
  - CCE-91329-3
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_backup_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/group-
  file:
    path: /etc/group-
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91329-3
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_backup_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chgrp 0 /etc/group-

Rule Verify Group Who Owns Backup gshadow File [ref]

To properly set the group owner of /etc/gshadow-, run the command:

$ sudo chgrp root /etc/gshadow-

Rationale:

The /etc/gshadow- file is a backup of /etc/gshadow, and as such, it contains group password hashes. Protection of this file is critical for system security.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_gshadow

Identifiers:

CCE-92698-0

References:

disa	CCI-002223
nist	AC-6 (1)
pcidss	Req-8.7
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/gshadow-
  stat:
    path: /etc/gshadow-
  register: file_exists
  tags:
  - CCE-92698-0
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - configure_strategy
  - file_groupowner_backup_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/gshadow-
  file:
    path: /etc/gshadow-
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-92698-0
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - configure_strategy
  - file_groupowner_backup_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chgrp 0 /etc/gshadow-

Rule Verify Group Who Owns Backup passwd File [ref]

To properly set the group owner of /etc/passwd-, run the command:

$ sudo chgrp root /etc/passwd-

Rationale:

The /etc/passwd- file is a backup file of /etc/passwd, and as such, it contains information about the users that are configured on the system. Protection of this file is critical for system security.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_passwd

Identifiers:

CCE-91323-6

References:

disa	CCI-002223
nist	AC-6 (1)
pcidss	Req-8.7
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.5
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/passwd-
  stat:
    path: /etc/passwd-
  register: file_exists
  tags:
  - CCE-91323-6
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_backup_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/passwd-
  file:
    path: /etc/passwd-
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91323-6
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_backup_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chgrp 0 /etc/passwd-

Rule Verify User Who Owns Backup shadow File [ref]

To properly set the group owner of /etc/shadow-, run the command:

$ sudo chgrp shadow /etc/shadow-

Rationale:

The /etc/shadow- file is a backup file of /etc/shadow, and as such, it contains the list of local system accounts and password hashes. Protection of this file is critical for system security.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_shadow

Identifiers:

CCE-91327-7

References:

pcidss	Req-8.7
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.6
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/shadow-
  stat:
    path: /etc/shadow-
  register: file_exists
  tags:
  - CCE-91327-7
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_backup_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 15 on /etc/shadow-
  file:
    path: /etc/shadow-
    group: '15'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91327-7
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_backup_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chgrp 15 /etc/shadow-

Rule Verify Group Who Owns group File [ref]

To properly set the group owner of /etc/group, run the command:

$ sudo chgrp root /etc/group

Rationale:

The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_etc_group

Identifiers:

CCE-85801-9

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cjis	5.5.2.2
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
pcidss	Req-8.7.c
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.4
anssi	R50
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/group
  stat:
    path: /etc/group
  register: file_exists
  tags:
  - CCE-85801-9
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/group
  file:
    path: /etc/group
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-85801-9
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chgrp 0 /etc/group

Rule Verify Group Who Owns gshadow File [ref]

To properly set the group owner of /etc/gshadow, run the command:

$ sudo chgrp root /etc/gshadow

Rationale:

The /etc/gshadow file contains group password hashes. Protection of this file is critical for system security.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_etc_gshadow

Identifiers:

CCE-91348-3

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.2
anssi	R50

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/gshadow
  stat:
    path: /etc/gshadow
  register: file_exists
  tags:
  - CCE-91348-3
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_groupowner_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/gshadow
  file:
    path: /etc/gshadow
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91348-3
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_groupowner_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chgrp 0 /etc/gshadow

Rule Verify Group Who Owns passwd File [ref]

To properly set the group owner of /etc/passwd, run the command:

$ sudo chgrp root /etc/passwd

Rationale:

The /etc/passwd file contains information about the users that are configured on the system. Protection of this file is critical for system security.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_etc_passwd

Identifiers:

CCE-85809-2

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cjis	5.5.2.2
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
pcidss	Req-8.7.c
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.2
anssi	R50
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/passwd
  stat:
    path: /etc/passwd
  register: file_exists
  tags:
  - CCE-85809-2
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/passwd
  file:
    path: /etc/passwd
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-85809-2
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chgrp 0 /etc/passwd

Rule Verify Group Who Owns shadow File [ref]

To properly set the group owner of /etc/shadow, run the command:

$ sudo chgrp shadow /etc/shadow

Rationale:

The /etc/shadow file stores password hashes. Protection of this file is critical for system security.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_etc_shadow

Identifiers:

CCE-85808-4

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cjis	5.5.2.2
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
pcidss	Req-8.7.c
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.3
anssi	R50
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/shadow
  stat:
    path: /etc/shadow
  register: file_exists
  tags:
  - CCE-85808-4
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 15 on /etc/shadow
  file:
    path: /etc/shadow
    group: '15'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-85808-4
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chgrp 15 /etc/shadow

Rule Verify User Who Owns Backup group File [ref]

To properly set the owner of /etc/group-, run the command:

$ sudo chown root /etc/group-

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_backup_etc_group

Identifiers:

CCE-91330-1

References:

disa	CCI-002223
nist	AC-6 (1)
pcidss	Req-8.7.c
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.7
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/group-
  stat:
    path: /etc/group-
  register: file_exists
  tags:
  - CCE-91330-1
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_backup_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/group-
  file:
    path: /etc/group-
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91330-1
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_backup_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chown 0 /etc/group-

Rule Verify User Who Owns Backup gshadow File [ref]

To properly set the owner of /etc/gshadow-, run the command:

$ sudo chown root /etc/gshadow-

Rationale:

The /etc/gshadow- file is a backup of /etc/gshadow, and as such, it contains group password hashes. Protection of this file is critical for system security.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_backup_etc_gshadow

Identifiers:

CCE-92699-8

References:

disa	CCI-002223
nist	AC-6 (1)
pcidss	Req-8.7
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/gshadow-
  stat:
    path: /etc/gshadow-
  register: file_exists
  tags:
  - CCE-92699-8
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - configure_strategy
  - file_owner_backup_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/gshadow-
  file:
    path: /etc/gshadow-
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-92699-8
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - configure_strategy
  - file_owner_backup_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chown 0 /etc/gshadow-

Rule Verify User Who Owns Backup passwd File [ref]

To properly set the owner of /etc/passwd-, run the command:

$ sudo chown root /etc/passwd-

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_backup_etc_passwd

Identifiers:

CCE-91324-4

References:

disa	CCI-002223
nist	AC-6 (1)
pcidss	Req-8.7.c
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.5
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/passwd-
  stat:
    path: /etc/passwd-
  register: file_exists
  tags:
  - CCE-91324-4
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_backup_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/passwd-
  file:
    path: /etc/passwd-
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91324-4
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_backup_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chown 0 /etc/passwd-

Rule Verify Group Who Owns Backup shadow File [ref]

To properly set the owner of /etc/shadow-, run the command:

$ sudo chown root /etc/shadow-

Rationale:

The /etc/shadow- file is a backup file of /etc/shadow, and as such, it contains the list of local system accounts and password hashes. Protection of this file is critical for system security.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_backup_etc_shadow

Identifiers:

CCE-91326-9

References:

disa	CCI-002223
nist	AC-6 (1)
pcidss	Req-8.7.c
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.6
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/shadow-
  stat:
    path: /etc/shadow-
  register: file_exists
  tags:
  - CCE-91326-9
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_backup_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/shadow-
  file:
    path: /etc/shadow-
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91326-9
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_backup_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chown 0 /etc/shadow-

Rule Verify User Who Owns group File [ref]

To properly set the owner of /etc/group, run the command:

$ sudo chown root /etc/group

Rationale:

The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_etc_group

Identifiers:

CCE-85802-7

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cjis	5.5.2.2
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
disa	CCI-002223
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
pcidss	Req-8.7.c
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.4
anssi	R50
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/group
  stat:
    path: /etc/group
  register: file_exists
  tags:
  - CCE-85802-7
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/group
  file:
    path: /etc/group
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-85802-7
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chown 0 /etc/group

Rule Verify User Who Owns gshadow File [ref]

To properly set the owner of /etc/gshadow, run the command:

$ sudo chown root /etc/gshadow

Rationale:

The /etc/gshadow file contains group password hashes. Protection of this file is critical for system security.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_etc_gshadow

Identifiers:

CCE-91230-3

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
disa	CCI-002223
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.2
anssi	R50

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/gshadow
  stat:
    path: /etc/gshadow
  register: file_exists
  tags:
  - CCE-91230-3
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_owner_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/gshadow
  file:
    path: /etc/gshadow
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91230-3
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_owner_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chown 0 /etc/gshadow

Rule Verify User Who Owns passwd File [ref]

To properly set the owner of /etc/passwd, run the command:

$ sudo chown root /etc/passwd

Rationale:

The /etc/passwd file contains information about the users that are configured on the system. Protection of this file is critical for system security.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_etc_passwd

Identifiers:

CCE-85806-8

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cjis	5.5.2.2
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
disa	CCI-002223
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
pcidss	Req-8.7.c
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.2
anssi	R50
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/passwd
  stat:
    path: /etc/passwd
  register: file_exists
  tags:
  - CCE-85806-8
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/passwd
  file:
    path: /etc/passwd
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-85806-8
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chown 0 /etc/passwd

Rule Verify User Who Owns shadow File [ref]

To properly set the owner of /etc/shadow, run the command:

$ sudo chown root /etc/shadow

Rationale:

The /etc/shadow file contains the list of local system accounts and stores password hashes. Protection of this file is critical for system security. Failure to give ownership of this file to root provides the designated owner with access to sensitive information which could weaken the system security posture.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_etc_shadow

Identifiers:

CCE-85807-6

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cjis	5.5.2.2
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
disa	CCI-002223
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
pcidss	Req-8.7.c
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.3
anssi	R50
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/shadow
  stat:
    path: /etc/shadow
  register: file_exists
  tags:
  - CCE-85807-6
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/shadow
  file:
    path: /etc/shadow
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-85807-6
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

chown 0 /etc/shadow

Rule Verify Permissions on Backup group File [ref]

To properly set the permissions of /etc/group-, run the command:

$ sudo chmod 0644 /etc/group-

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_backup_etc_group

Identifiers:

CCE-91331-9

References:

disa	CCI-002223
nist	AC-6 (1)
pcidss	Req-8.7.c
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.7
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/group-
  stat:
    path: /etc/group-
  register: file_exists
  tags:
  - CCE-91331-9
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_backup_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwt on /etc/group-
  file:
    path: /etc/group-
    mode: u-xs,g-xws,o-xwt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91331-9
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_backup_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure






chmod u-xs,g-xws,o-xwt /etc/group-

Rule Verify Permissions on Backup gshadow File [ref]

To properly set the permissions of /etc/gshadow-, run the command:

$ sudo chmod 0000 /etc/gshadow-

Rationale:

The /etc/gshadow- file is a backup of /etc/gshadow, and as such, it contains group password hashes. Protection of this file is critical for system security.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_backup_etc_gshadow

Identifiers:

CCE-92700-4

References:

disa	CCI-002223
nist	AC-6 (1)
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/gshadow-
  stat:
    path: /etc/gshadow-
  register: file_exists
  tags:
  - CCE-92700-4
  - NIST-800-53-AC-6 (1)
  - configure_strategy
  - file_permissions_backup_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xwrs,g-xwrs,o-xwrt on /etc/gshadow-
  file:
    path: /etc/gshadow-
    mode: u-xwrs,g-xwrs,o-xwrt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-92700-4
  - NIST-800-53-AC-6 (1)
  - configure_strategy
  - file_permissions_backup_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure






chmod u-xwrs,g-xwrs,o-xwrt /etc/gshadow-

Rule Verify Permissions on Backup passwd File [ref]

To properly set the permissions of /etc/passwd-, run the command:

$ sudo chmod 0644 /etc/passwd-

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_backup_etc_passwd

Identifiers:

CCE-91325-1

References:

disa	CCI-002223
nist	AC-6 (1)
pcidss	Req-8.7.c
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.5
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/passwd-
  stat:
    path: /etc/passwd-
  register: file_exists
  tags:
  - CCE-91325-1
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_backup_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwt on /etc/passwd-
  file:
    path: /etc/passwd-
    mode: u-xs,g-xws,o-xwt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91325-1
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_backup_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure






chmod u-xs,g-xws,o-xwt /etc/passwd-

Rule Verify Permissions on Backup shadow File [ref]

To properly set the permissions of /etc/shadow-, run the command:

$ sudo chmod 0000 /etc/shadow-

Rationale:

The /etc/shadow- file is a backup file of /etc/shadow, and as such, it contains the list of local system accounts and password hashes. Protection of this file is critical for system security.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_backup_etc_shadow

Identifiers:

CCE-91328-5

References:

disa	CCI-002223
nist	AC-6 (1)
pcidss	Req-8.7.c
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.6
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/shadow-
  stat:
    path: /etc/shadow-
  register: file_exists
  tags:
  - CCE-91328-5
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_backup_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xwrs,g-xwrs,o-xwrt on /etc/shadow-
  file:
    path: /etc/shadow-
    mode: u-xwrs,g-xwrs,o-xwrt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91328-5
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_backup_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure






chmod u-xwrs,g-xwrs,o-xwrt /etc/shadow-

Rule Verify Permissions on group File [ref]

To properly set the permissions of /etc/group, run the command:

$ sudo chmod 0644 /etc/group

Rationale:

The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_etc_group

Identifiers:

CCE-85803-5

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cjis	5.5.2.2
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
disa	CCI-002223
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
pcidss	Req-8.7.c
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.4
anssi	R50
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/group
  stat:
    path: /etc/group
  register: file_exists
  tags:
  - CCE-85803-5
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwt on /etc/group
  file:
    path: /etc/group
    mode: u-xs,g-xws,o-xwt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-85803-5
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure






chmod u-xs,g-xws,o-xwt /etc/group

Rule Verify Permissions on gshadow File [ref]

To properly set the permissions of /etc/gshadow, run the command:

$ sudo chmod 0000 /etc/gshadow

Rationale:

The /etc/gshadow file contains group password hashes. Protection of this file is critical for system security.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_etc_gshadow

Identifiers:

CCE-91231-1

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
disa	CCI-002223
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.2
anssi	R50

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/gshadow
  stat:
    path: /etc/gshadow
  register: file_exists
  tags:
  - CCE-91231-1
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xwrs,g-xwrs,o-xwrt on /etc/gshadow
  file:
    path: /etc/gshadow
    mode: u-xwrs,g-xwrs,o-xwrt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91231-1
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure






chmod u-xwrs,g-xwrs,o-xwrt /etc/gshadow

Rule Verify Permissions on passwd File [ref]

To properly set the permissions of /etc/passwd, run the command:

$ sudo chmod 0644 /etc/passwd

Rationale:

If the /etc/passwd file is writable by a group-owner or the world the risk of its compromise is increased. The file contains the list of accounts on the system and associated information, and protection of this file is critical for system security.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_etc_passwd

Identifiers:

CCE-85805-0

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cjis	5.5.2.2
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
disa	CCI-002223
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
pcidss	Req-8.7.c
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.2
anssi	R50
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/passwd
  stat:
    path: /etc/passwd
  register: file_exists
  tags:
  - CCE-85805-0
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwt on /etc/passwd
  file:
    path: /etc/passwd
    mode: u-xs,g-xws,o-xwt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-85805-0
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure






chmod u-xs,g-xws,o-xwt /etc/passwd

Rule Verify Permissions on shadow File [ref]

To properly set the permissions of /etc/shadow, run the command:

$ sudo chmod 0640 /etc/shadow

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_etc_shadow

Identifiers:

CCE-85804-3

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cjis	5.5.2.2
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
disa	CCI-002223
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
pcidss	Req-8.7.c
os-srg	SRG-OS-000480-GPOS-00227
cis	6.1.3
anssi	R50
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/shadow
  stat:
    path: /etc/shadow
  register: file_exists
  tags:
  - CCE-85804-3
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwrt on /etc/shadow
  file:
    path: /etc/shadow
    mode: u-xs,g-xws,o-xwrt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-85804-3
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure






chmod u-xs,g-xws,o-xwrt /etc/shadow

Rule Verify that All World-Writable Directories Have Sticky Bits Set [ref]

When the so-called 'sticky bit' is set on a directory, only the owner of a given file may remove that file from the directory. Without the sticky bit, any user with write access to a directory may remove any file in the directory. Setting the sticky bit prevents users from removing each other's files. In cases where there is no reason for a directory to be world-writable, a better solution is to remove that permission rather than to set the sticky bit. However, if a directory is used by a particular application, consult that application's documentation instead of blindly changing modes.
To set the sticky bit on a world-writable directory DIR, run the following command:

$ sudo chmod +t DIR

Warning: This rule can take a long time to perform the check and might consume a considerable amount of resources depending on the number of directories present on the system. It is not a problem in most cases, but especially systems with a large number of directories can be affected. See https://access.redhat.com/articles/6999111.

Rationale:

Failing to set the sticky bit on public directories allows unauthorized users to delete files in the directory structure.

The only authorized public directories are those temporary directories supplied with the system, or those designed to be temporary file repositories. The setting is normally reserved for directories used by the system, by users for temporary file storage (such as /tmp), and for directories requiring global read/write access.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_dir_perms_world_writable_sticky_bits

Identifiers:

CCE-83282-4

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
disa	CCI-001090
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000138-GPOS-00069
stigid	SLES-15-010300
cis	1.1.22
anssi	R54
pcidss4	2.2.6
stigref	SV-234828r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Verify that All World-Writable Directories Have Sticky Bits Set - Define Excluded
    (Non-Local) File Systems and Paths
  ansible.builtin.set_fact:
    excluded_fstypes:
    - afs
    - ceph
    - cifs
    - smb3
    - smbfs
    - sshfs
    - ncpfs
    - ncp
    - nfs
    - nfs4
    - gfs
    - gfs2
    - glusterfs
    - gpfs
    - pvfs2
    - ocfs2
    - lustre
    - davfs
    - fuse.sshfs
    excluded_paths:
    - dev
    - proc
    - run
    - sys
    search_paths: []
  tags:
  - CCE-83282-4
  - DISA-STIG-SLES-15-010300
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - dir_perms_world_writable_sticky_bits
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Verify that All World-Writable Directories Have Sticky Bits Set - Find Relevant
    Root Directories Ignoring Pre-Defined Excluded Paths
  ansible.builtin.find:
    paths: /
    file_type: directory
    excludes: '{{ excluded_paths }}'
    hidden: true
    recurse: false
  register: result_relevant_root_dirs
  tags:
  - CCE-83282-4
  - DISA-STIG-SLES-15-010300
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - dir_perms_world_writable_sticky_bits
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Verify that All World-Writable Directories Have Sticky Bits Set - Include
    Relevant Root Directories in a List of Paths to be Searched
  ansible.builtin.set_fact:
    search_paths: '{{ search_paths | union([item.path]) }}'
  loop: '{{ result_relevant_root_dirs.files }}'
  tags:
  - CCE-83282-4
  - DISA-STIG-SLES-15-010300
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - dir_perms_world_writable_sticky_bits
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Verify that All World-Writable Directories Have Sticky Bits Set - Increment
    Search Paths List with Local Partitions Mount Points
  ansible.builtin.set_fact:
    search_paths: '{{ search_paths | union([item.mount]) }}'
  loop: '{{ ansible_mounts }}'
  when:
  - item.fstype not in excluded_fstypes
  - item.mount != '/'
  tags:
  - CCE-83282-4
  - DISA-STIG-SLES-15-010300
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - dir_perms_world_writable_sticky_bits
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Verify that All World-Writable Directories Have Sticky Bits Set - Increment
    Search Paths List with Local NFS File System Targets
  ansible.builtin.set_fact:
    search_paths: '{{ search_paths | union([item.device.split('':'')[1]]) }}'
  loop: '{{ ansible_mounts }}'
  when: item.device is search("localhost:")
  tags:
  - CCE-83282-4
  - DISA-STIG-SLES-15-010300
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - dir_perms_world_writable_sticky_bits
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Verify that All World-Writable Directories Have Sticky Bits Set - Define Rule
    Specific Facts
  ansible.builtin.set_fact:
    world_writable_dirs: []
  tags:
  - CCE-83282-4
  - DISA-STIG-SLES-15-010300
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - dir_perms_world_writable_sticky_bits
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Verify that All World-Writable Directories Have Sticky Bits Set - Find All
    Uncompliant Directories in Local File Systems
  ansible.builtin.command:
    cmd: find {{ item }} -xdev -type d ( -perm -0002 -a ! -perm -1000 )
  loop: '{{ search_paths }}'
  changed_when: false
  register: result_found_dirs
  tags:
  - CCE-83282-4
  - DISA-STIG-SLES-15-010300
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - dir_perms_world_writable_sticky_bits
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Verify that All World-Writable Directories Have Sticky Bits Set - Create List
    of World Writable Directories Without Sticky Bit
  ansible.builtin.set_fact:
    world_writable_dirs: '{{ world_writable_dirs | union(item.stdout_lines) | list
      }}'
  loop: '{{ result_found_dirs.results }}'
  when: result_found_dirs is not skipped and item is not skipped
  tags:
  - CCE-83282-4
  - DISA-STIG-SLES-15-010300
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - dir_perms_world_writable_sticky_bits
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Verify that All World-Writable Directories Have Sticky Bits Set - Ensure Sticky
    Bit is Set on Local World Writable Directories
  ansible.builtin.file:
    path: '{{ item }}'
    mode: a+t
  loop: '{{ world_writable_dirs }}'
  tags:
  - CCE-83282-4
  - DISA-STIG-SLES-15-010300
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - dir_perms_world_writable_sticky_bits
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

df --local -P | awk '{if (NR!=1) print $6}' \
| xargs -I '$6' find '$6' -xdev -type d \
\( -perm -0002 -a ! -perm -1000 \) 2>/dev/null \
-exec chmod a+t {} +

Rule Ensure No World-Writable Files Exist [ref]

It is generally a good idea to remove global (other) write access to a file when it is discovered. However, check with documentation for specific applications before making changes. Also, monitor for recurring world-writable files, as these may be symptoms of a misconfigured application or user account. Finally, this applies to real files and not virtual files that are a part of pseudo file systems such as sysfs or procfs.

Warning: This rule can take a long time to perform the check and might consume a considerable amount of resources depending on the number of files present on the system. It is not a problem in most cases, but especially systems with a large number of files can be affected. See https://access.redhat.com/articles/6999111.

Rationale:

Data in world-writable files can be modified by any user on the system. In almost all circumstances, files can be configured using a combination of user and group permissions to support whatever legitimate access is needed without the risk caused by world-writable files.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_unauthorized_world_writable

Identifiers:

CCE-91233-7

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
cis	6.1.8
anssi	R54
pcidss4	2.2.6

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure


FILTER_NODEV=$(awk '/nodev/ { print $2 }' /proc/filesystems | paste -sd,)
PARTITIONS=$(findmnt -n -l -k -it $FILTER_NODEV | awk '{ print $1 }')
for PARTITION in $PARTITIONS; do
  find "${PARTITION}" -xdev -type f -perm -002 -exec chmod o-w {} \; 2>/dev/null
done

# Ensure /tmp is also fixed whem tmpfs is used.
if grep "^tmpfs /tmp" /proc/mounts; then
  find /tmp -xdev -type f -perm -002 -exec chmod o-w {} \; 2>/dev/null
fi

Rule Ensure All Files Are Owned by a Group [ref]

If any file is not group-owned by a group present in /etc/group, the cause of the lack of group-ownership must be investigated. Following this, those files should be deleted or assigned to an appropriate group. Locate the mount points related to local devices by the following command:

$ findmnt -n -l -k -it $(awk '/nodev/ { print $2 }' /proc/filesystems | paste -sd,)

For all mount points listed by the previous command, it is necessary to search for files which do not belong to a valid group using the following command:

$ sudo find MOUNTPOINT -xdev -nogroup 2>/dev/null

Warning: This rule only considers local groups as valid groups. If you have your groups defined outside /etc/group, the rule won't consider those.

Rationale:

Unowned files do not directly imply a security problem, but they are generally a sign that something is amiss. They may be caused by an intruder, by incorrect software installation or draft software removal, or by failure to remove all files belonging to a deleted account, or other similar cases. The files should be repaired so they will not cause problems when accounts are created in the future, and the cause should be discovered and addressed.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_ungroupowned

Identifiers:

CCE-85658-3

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.06, DSS06.10
disa	CCI-000366, CCI-002165
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5, PR.PT-3
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040410
cis	6.1.10
anssi	R53
pcidss4	2.2.6
stigref	SV-235029r622137_rule

Rule Ensure All Files Are Owned by a User [ref]

If any files are not owned by a user, then the cause of their lack of ownership should be investigated. Following this, the files should be deleted or assigned to an appropriate user. Locate the mount points related to local devices by the following command:

$ findmnt -n -l -k -it $(awk '/nodev/ { print $2 }' /proc/filesystems | paste -sd,)

For all mount points listed by the previous command, it is necessary to search for files which do not belong to a valid user using the following command:

$ sudo find MOUNTPOINT -xdev -nouser 2>/dev/null

Warning: For this rule to evaluate centralized user accounts, getent must be working properly so that running the command

getent passwd

returns a list of all users in your organization. If using the System Security Services Daemon (SSSD),

enumerate = true

must be configured in your organization's domain to return a complete list of users

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_no_files_unowned_by_user

Identifiers:

CCE-85657-5

References:

cis-csc	11, 12, 13, 14, 15, 16, 18, 3, 5, 9
cobit5	APO01.06, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.03, DSS06.06
disa	CCI-000366, CCI-002165
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 5.2, SR 7.6
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.AC-6, PR.DS-5, PR.IP-1, PR.PT-3
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040400
cis	6.1.9
anssi	R53
pcidss4	2.2.6
stigref	SV-235028r622137_rule

Rule Verify permissions of log files [ref]

Any operating system providing too much information in error messages risks compromising the data and security of the structure, and content of error messages needs to be carefully considered by the organization. Organizations carefully consider the structure/content of error messages. The extent to which information systems are able to identify and handle error conditions is guided by organizational policy and operational requirements. Information that could be exploited by adversaries includes, for example, erroneous logon attempts with passwords entered by mistake as the username, mission/business information that can be derived from (if not stated explicitly by) information recorded, and personal information, such as account numbers, social security numbers, and credit card numbers.

Rationale:

The SUSE Linux Enterprise 15 must generate error messages that provide information necessary for corrective actions without revealing information that could be exploited by adversaries.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_permissions_local_var_log

Identifiers:

CCE-85755-7

References:

disa	CCI-001312
nist	SI-11(a), SI-11(b), SI-11.1(iii)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000205-GPOS-00083
stigid	SLES-15-010340
cis	4.2.3
pcidss4	10.3.1
stigref	SV-234832r880884_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Find /var/log/ file(s) recursively
  command: find -H /var/log/  -perm /u+xs,g+xws,o+xwrt ! -name "*[bw]tmp" ! -name
    "*lastlog" -type f -regex ".*"
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  tags:
  - CCE-85755-7
  - DISA-STIG-SLES-15-010340
  - NIST-800-53-SI-11(a)
  - NIST-800-53-SI-11(b)
  - NIST-800-53-SI-11.1(iii)
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - permissions_local_var_log

- name: Set permissions for /var/log/ file(s)
  file:
    path: '{{ item }}'
    mode: u-xs,g-xws,o-xwrt
    state: file
  with_items:
  - '{{ files_found.stdout_lines }}'
  tags:
  - CCE-85755-7
  - DISA-STIG-SLES-15-010340
  - NIST-800-53-SI-11(a)
  - NIST-800-53-SI-11(b)
  - NIST-800-53-SI-11.1(iii)
  - PCI-DSSv4-10.3.1
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - permissions_local_var_log

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure






find -H /var/log/  -perm /u+xs,g+xws,o+xwrt ! -name '*[bw]tmp' ! -name '*lastlog' -type f -regex '.*' -exec chmod u-xs,g-xws,o-xwrt {} \;

Group Restrict Dynamic Mounting and Unmounting of Filesystems Group contains 3 rules

[ref] Linux includes a number of facilities for the automated addition and removal of filesystems on a running system. These facilities may be necessary in many environments, but this capability also carries some risk -- whether direct risk from allowing users to introduce arbitrary filesystems, or risk that software flaws in the automated mount facility itself could allow an attacker to compromise the system.

This command can be used to list the types of filesystems that are available to the currently executing kernel:

$ find /lib/modules/`uname -r`/kernel/fs -type f -name '*.ko'

If these filesystems are not required then they can be explicitly disabled in a configuratio file in /etc/modprobe.d.

Rule Disable the Automounter [ref]

The autofs daemon mounts and unmounts filesystems, such as user home directories shared via NFS, on demand. In addition, autofs can be used to handle removable media, and the default configuration provides the cdrom device as /misc/cd. However, this method of providing access to removable media is not common, so autofs can almost always be disabled if NFS is not in use. Even if NFS is required, it may be possible to configure filesystem mounts statically by editing /etc/fstab rather than relying on the automounter.

The autofs service can be disabled with the following command:

$ sudo systemctl mask --now autofs.service

Rationale:

Disabling the automounter permits the administrator to statically control filesystem mounting through /etc/fstab.

Additionally, automatically mounting filesystems permits easy introduction of unknown devices, thereby facilitating malicious activity.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_service_autofs_disabled

Identifiers:

CCE-83278-2

References:

cis-csc	1, 12, 15, 16, 5
cobit5	APO13.01, DSS01.04, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui	3.4.6
disa	CCI-000366, CCI-000778, CCI-001958
hipaa	164.308(a)(3)(i), 164.308(a)(3)(ii)(A), 164.310(d)(1), 164.310(d)(2), 164.312(a)(1), 164.312(a)(2)(iv), 164.312(b)
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.6
iso27001-2013	A.11.2.6, A.13.1.1, A.13.2.1, A.18.1.4, A.6.2.1, A.6.2.2, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nist	CM-7(a), CM-7(b), CM-6(a), MP-7
nist-csf	PR.AC-1, PR.AC-3, PR.AC-6, PR.AC-7
os-srg	SRG-OS-000114-GPOS-00059, SRG-OS-000378-GPOS-00163, SRG-OS-000480-GPOS-00227
stigid	SLES-15-010240
cis	1.1.23
stigref	SV-234823r854187_rule

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
masked = ["autofs"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83278-2
  - DISA-STIG-SLES-15-010240
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_autofs_disabled

- name: Disable the Automounter - Collect systemd Services Present in the System
  ansible.builtin.command: systemctl -q list-unit-files --type service
  register: service_exists
  changed_when: false
  failed_when: service_exists.rc not in [0, 1]
  check_mode: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "autofs" in ansible_facts.packages )
  tags:
  - CCE-83278-2
  - DISA-STIG-SLES-15-010240
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_autofs_disabled

- name: Disable the Automounter - Ensure autofs.service is Masked
  ansible.builtin.systemd:
    name: autofs.service
    state: stopped
    enabled: false
    masked: true
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "autofs" in ansible_facts.packages )
  - service_exists.stdout_lines is search("autofs.service", multiline=True)
  tags:
  - CCE-83278-2
  - DISA-STIG-SLES-15-010240
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_autofs_disabled

- name: Unit Socket Exists - autofs.socket
  ansible.builtin.command: systemctl -q list-unit-files autofs.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "autofs" in ansible_facts.packages )
  tags:
  - CCE-83278-2
  - DISA-STIG-SLES-15-010240
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_autofs_disabled

- name: Disable the Automounter - Disable Socket autofs
  ansible.builtin.systemd:
    name: autofs.socket
    enabled: false
    state: stopped
    masked: true
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "autofs" in ansible_facts.packages )
  - socket_file_exists.stdout_lines is search("autofs.socket", multiline=True)
  tags:
  - CCE-83278-2
  - DISA-STIG-SLES-15-010240
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_autofs_disabled

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include disable_autofs

class disable_autofs {
  service {'autofs':
    enable => false,
    ensure => 'stopped',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q autofs ); then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'autofs.service'
"$SYSTEMCTL_EXEC" disable 'autofs.service'
"$SYSTEMCTL_EXEC" mask 'autofs.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files autofs.socket; then
    "$SYSTEMCTL_EXEC" stop 'autofs.socket'
    "$SYSTEMCTL_EXEC" mask 'autofs.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'autofs.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable Mounting of udf [ref]

To configure the system to prevent the udf kernel module from being loaded, add the following line to the file /etc/modprobe.d/udf.conf:

install udf /bin/true

This effectively prevents usage of this uncommon filesystem. The udf filesystem type is the universal disk format used to implement the ISO/IEC 13346 and ECMA-167 specifications. This is an open vendor filesystem type for data storage on a broad range of media. This filesystem type is neccessary to support writing DVDs and newer optical disc formats.

Rationale:

Removing support for unneeded filesystem types reduces the local attack surface of the system.

Severity:

low

Rule ID: xccdf_org.ssgproject.content_rule_kernel_module_udf_disabled

Identifiers:

CCE-92453-0

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
cui	3.4.6
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	1.1.1.2

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: Ensure kernel module 'udf' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/udf.conf
    regexp: install\s+udf
    line: install udf /bin/false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92453-0
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - kernel_module_udf_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required

- name: Ensure kernel module 'udf' is blacklisted
  lineinfile:
    create: true
    dest: /etc/modprobe.d/udf.conf
    regexp: ^blacklist udf$
    line: blacklist udf
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92453-0
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - kernel_module_udf_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install udf" /etc/modprobe.d/udf.conf ; then
	
	sed -i 's#^install udf.*#install udf /bin/false#g' /etc/modprobe.d/udf.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/udf.conf
	echo "install udf /bin/false" >> /etc/modprobe.d/udf.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist udf$" /etc/modprobe.d/udf.conf ; then
	echo "blacklist udf" >> /etc/modprobe.d/udf.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable Modprobe Loading of USB Storage Driver [ref]

To prevent USB storage devices from being used, configure the kernel module loading system to prevent automatic loading of the USB storage driver. To configure the system to prevent the usb-storage kernel module from being loaded, add the following line to the file /etc/modprobe.d/usb-storage.conf:

install usb-storage /bin/true

This will prevent the modprobe program from loading the usb-storage module, but will not prevent an administrator (or another program) from using the insmod program to load the module manually.

Rationale:

USB storage devices such as thumb drives can be used to introduce malicious software.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_kernel_module_usb-storage_disabled

Identifiers:

CCE-83294-9

References:

cis-csc	1, 12, 15, 16, 5
cobit5	APO13.01, DSS01.04, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui	3.1.21
disa	CCI-000366, CCI-000778, CCI-001958
hipaa	164.308(a)(3)(i), 164.308(a)(3)(ii)(A), 164.310(d)(1), 164.310(d)(2), 164.312(a)(1), 164.312(a)(2)(iv), 164.312(b)
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.6
iso27001-2013	A.11.2.6, A.13.1.1, A.13.2.1, A.18.1.4, A.6.2.1, A.6.2.2, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3
nist	CM-7(a), CM-7(b), CM-6(a), MP-7
nist-csf	PR.AC-1, PR.AC-3, PR.AC-6, PR.AC-7
os-srg	SRG-OS-000114-GPOS-00059, SRG-OS-000378-GPOS-00163, SRG-OS-000480-GPOS-00227
app-srg-ctr	SRG-APP-000141-CTR-000315
stigid	SLES-15-010480
cis	1.1.23
pcidss4	3.4.2
stigref	SV-234856r854202_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: Ensure kernel module 'usb-storage' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/usb-storage.conf
    regexp: install\s+usb-storage
    line: install usb-storage /bin/false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83294-9
  - DISA-STIG-SLES-15-010480
  - NIST-800-171-3.1.21
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - PCI-DSSv4-3.4.2
  - disable_strategy
  - kernel_module_usb-storage_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

- name: Ensure kernel module 'usb-storage' is blacklisted
  lineinfile:
    create: true
    dest: /etc/modprobe.d/usb-storage.conf
    regexp: ^blacklist usb-storage$
    line: blacklist usb-storage
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83294-9
  - DISA-STIG-SLES-15-010480
  - NIST-800-171-3.1.21
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - PCI-DSSv4-3.4.2
  - disable_strategy
  - kernel_module_usb-storage_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install usb-storage" /etc/modprobe.d/usb-storage.conf ; then
	
	sed -i 's#^install usb-storage.*#install usb-storage /bin/false#g' /etc/modprobe.d/usb-storage.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/usb-storage.conf
	echo "install usb-storage /bin/false" >> /etc/modprobe.d/usb-storage.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist usb-storage$" /etc/modprobe.d/usb-storage.conf ; then
	echo "blacklist usb-storage" >> /etc/modprobe.d/usb-storage.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Restrict Partition Mount Options Group contains 13 rules

[ref] System partitions can be mounted with certain options that limit what files on those partitions can do. These options are set in the /etc/fstab configuration file, and can be used to make certain types of malicious behavior more difficult.

Rule Add nodev Option to /dev/shm [ref]

The nodev mount option can be used to prevent creation of device files in /dev/shm. Legitimate character and block devices should not exist within temporary directories like /dev/shm. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of /dev/shm.

Rationale:

The only legitimate location for device files is the /dev directory located on the root partition. The only exception to this is chroot jails.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_mount_option_dev_shm_nodev

Identifiers:

CCE-92457-1

References:

cis-csc	11, 13, 14, 3, 8, 9
cobit5	APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06
disa	CCI-001764
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7
nist-csf	PR.IP-1, PR.PT-2, PR.PT-3
os-srg	SRG-OS-000368-GPOS-00154
cis	1.1.8

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	high
Reboot:	false
Strategy:	configure

- name: 'Add nodev Option to /dev/shm: Check information associated to mountpoint'
  command: findmnt  '/dev/shm'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92457-1
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /dev/shm: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - CCE-92457-1
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /dev/shm: If /dev/shm not mounted, craft mount_info manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /dev/shm
    - tmpfs
    - tmpfs
    - defaults
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ("" | length == 0)
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length == 0)
  tags:
  - CCE-92457-1
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /dev/shm: Make sure nodev option is part of the to /dev/shm
    options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nodev''
      }) }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - mount_info is defined and "nodev" not in mount_info.options
  tags:
  - CCE-92457-1
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /dev/shm: Ensure /dev/shm is mounted with nodev option'
  mount:
    path: /dev/shm
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - mount_info is defined
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("" |
    length == 0)
  tags:
  - CCE-92457-1
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nodev
  - no_reboot_needed

Remediation Shell script ⇲

Reboot:	false

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

function perform_remediation {
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /dev/shm)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nodev)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type="tmpfs"
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo "tmpfs /dev/shm tmpfs defaults,${previous_mount_opts}nodev 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nodev"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nodev|" /etc/fstab
    fi


    if mkdir -p "/dev/shm"; then
        if mountpoint -q "/dev/shm"; then
            mount -o remount --target "/dev/shm"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Add noexec Option to /dev/shm [ref]

The noexec mount option can be used to prevent binaries from being executed out of /dev/shm. It can be dangerous to allow the execution of binaries from world-writable temporary storage directories such as /dev/shm. Add the noexec option to the fourth column of /etc/fstab for the line which controls mounting of /dev/shm.

Rationale:

Allowing users to execute binaries from world-writable directories such as /dev/shm can expose the system to potential compromise.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_mount_option_dev_shm_noexec

Identifiers:

CCE-92456-3

References:

cis-csc	11, 13, 14, 3, 8, 9
cobit5	APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06
disa	CCI-001764
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7
nist-csf	PR.IP-1, PR.PT-2, PR.PT-3
os-srg	SRG-OS-000368-GPOS-00154
cis	1.1.7

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	high
Reboot:	false
Strategy:	configure

- name: 'Add noexec Option to /dev/shm: Check information associated to mountpoint'
  command: findmnt  '/dev/shm'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92456-3
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /dev/shm: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - CCE-92456-3
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /dev/shm: If /dev/shm not mounted, craft mount_info
    manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /dev/shm
    - tmpfs
    - tmpfs
    - defaults
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ("" | length == 0)
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length == 0)
  tags:
  - CCE-92456-3
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /dev/shm: Make sure noexec option is part of the to
    /dev/shm options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',noexec''
      }) }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - mount_info is defined and "noexec" not in mount_info.options
  tags:
  - CCE-92456-3
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /dev/shm: Ensure /dev/shm is mounted with noexec option'
  mount:
    path: /dev/shm
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - mount_info is defined
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("" |
    length == 0)
  tags:
  - CCE-92456-3
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed

Remediation Shell script ⇲

Reboot:	false

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

function perform_remediation {
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /dev/shm)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|noexec)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type="tmpfs"
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo "tmpfs /dev/shm tmpfs defaults,${previous_mount_opts}noexec 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "noexec"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,noexec|" /etc/fstab
    fi


    if mkdir -p "/dev/shm"; then
        if mountpoint -q "/dev/shm"; then
            mount -o remount --target "/dev/shm"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Add nosuid Option to /dev/shm [ref]

The nosuid mount option can be used to prevent execution of setuid programs in /dev/shm. The SUID and SGID permissions should not be required in these world-writable directories. Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of /dev/shm.

Rationale:

The presence of SUID and SGID executables should be tightly controlled. Users should not be able to execute SUID or SGID binaries from temporary storage partitions.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_mount_option_dev_shm_nosuid

Identifiers:

CCE-92458-9

References:

cis-csc	11, 13, 14, 3, 8, 9
cobit5	APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06
disa	CCI-001764
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7
nist-csf	PR.IP-1, PR.PT-2, PR.PT-3
os-srg	SRG-OS-000368-GPOS-00154
cis	1.1.9

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	high
Reboot:	false
Strategy:	configure

- name: 'Add nosuid Option to /dev/shm: Check information associated to mountpoint'
  command: findmnt  '/dev/shm'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92458-9
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /dev/shm: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - CCE-92458-9
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /dev/shm: If /dev/shm not mounted, craft mount_info
    manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /dev/shm
    - tmpfs
    - tmpfs
    - defaults
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ("" | length == 0)
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length == 0)
  tags:
  - CCE-92458-9
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /dev/shm: Make sure nosuid option is part of the to
    /dev/shm options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nosuid''
      }) }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - mount_info is defined and "nosuid" not in mount_info.options
  tags:
  - CCE-92458-9
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /dev/shm: Ensure /dev/shm is mounted with nosuid option'
  mount:
    path: /dev/shm
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - mount_info is defined
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("" |
    length == 0)
  tags:
  - CCE-92458-9
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nosuid
  - no_reboot_needed

Remediation Shell script ⇲

Reboot:	false

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

function perform_remediation {
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /dev/shm)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type="tmpfs"
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo "tmpfs /dev/shm tmpfs defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi


    if mkdir -p "/dev/shm"; then
        if mountpoint -q "/dev/shm"; then
            mount -o remount --target "/dev/shm"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Add nodev Option to /home [ref]

The nodev mount option can be used to prevent device files from being created in /home. Legitimate character and block devices should exist only in the /dev directory on the root partition or within chroot jails built for system services. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of /home.

Rationale:

The only legitimate location for device files is the /dev directory located on the root partition. The only exception to this is chroot jails.

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_mount_option_home_nodev

Identifiers:

CCE-92460-5

References:

os-srg	SRG-OS-000368-GPOS-00154
cis	1.1.18

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	high
Reboot:	false
Strategy:	configure

- name: 'Add nodev Option to /home: Check information associated to mountpoint'
  command: findmnt --fstab '/home'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "/home" in ansible_mounts | map(attribute="mount") | list )
  tags:
  - CCE-92460-5
  - configure_strategy
  - high_disruption
  - low_complexity
  - mount_option_home_nodev
  - no_reboot_needed
  - unknown_severity

- name: 'Add nodev Option to /home: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/home" in ansible_mounts | map(attribute="mount") | list )
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - CCE-92460-5
  - configure_strategy
  - high_disruption
  - low_complexity
  - mount_option_home_nodev
  - no_reboot_needed
  - unknown_severity

- name: 'Add nodev Option to /home: If /home not mounted, craft mount_info manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /home
    - ''
    - ''
    - defaults
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/home" in ansible_mounts | map(attribute="mount") | list )
  - ("--fstab" | length == 0)
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length == 0)
  tags:
  - CCE-92460-5
  - configure_strategy
  - high_disruption
  - low_complexity
  - mount_option_home_nodev
  - no_reboot_needed
  - unknown_severity

- name: 'Add nodev Option to /home: Make sure nodev option is part of the to /home
    options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nodev''
      }) }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/home" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined and "nodev" not in mount_info.options
  tags:
  - CCE-92460-5
  - configure_strategy
  - high_disruption
  - low_complexity
  - mount_option_home_nodev
  - no_reboot_needed
  - unknown_severity

- name: 'Add nodev Option to /home: Ensure /home is mounted with nodev option'
  mount:
    path: /home
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/home" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("--fstab"
    | length == 0)
  tags:
  - CCE-92460-5
  - configure_strategy
  - high_disruption
  - low_complexity
  - mount_option_home_nodev
  - no_reboot_needed
  - unknown_severity

Remediation Shell script ⇲

Reboot:	false

# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && findmnt --kernel "/home" > /dev/null || findmnt --fstab "/home" > /dev/null ); then

function perform_remediation {
    
        # the mount point /home has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/home")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/home' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /home in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /home)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nodev)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /home  defaults,${previous_mount_opts}nodev 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nodev"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nodev|" /etc/fstab
    fi


    if mkdir -p "/home"; then
        if mountpoint -q "/home"; then
            mount -o remount --target "/home"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Add nodev Option to Removable Media Partitions [ref]

The nodev mount option prevents files from being interpreted as character or block devices. Legitimate character and block devices should exist only in the /dev directory on the root partition or within chroot jails built for system services. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of any removable media partitions.

Rationale:

The only legitimate location for device files is the /dev directory located on the root partition. An exception to this is chroot jails, and it is not advised to set nodev on partitions which contain their root filesystems.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_mount_option_nodev_removable_partitions

Identifiers:

CCE-92462-1

References:

cis-csc	11, 12, 13, 14, 16, 3, 8, 9
cobit5	APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.06, DSS05.07, DSS06.03, DSS06.06
disa	CCI-000366
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.11.2.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.7.1.1, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, A.9.2.1
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7
nist-csf	PR.AC-3, PR.AC-6, PR.IP-1, PR.PT-2, PR.PT-3
os-srg	SRG-OS-000480-GPOS-00227
cis	1.1.20

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	high
Reboot:	false
Strategy:	configure

- name: XCCDF Value var_removable_partition # promote to variable
  set_fact:
    var_removable_partition: !!str (N/A)
  tags:
    - always

- name: Ensure permission nodev are set on var_removable_partition
  lineinfile:
    path: /etc/fstab
    regexp: ^\s*({{ var_removable_partition }})\s+([^\s]*)\s+([^\s]*)\s+([^\s]*)(.*)$
    backrefs: true
    line: \1 \2 \3 \4,nodev \5
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92462-1
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_nodev_removable_partitions
  - no_reboot_needed

Remediation Shell script ⇲

Reboot:	false

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_removable_partition='(N/A)'


device_regex="^\s*$var_removable_partition\s\+"
mount_option="nodev"

if grep -q $device_regex /etc/fstab ; then
    previous_opts=$(grep $device_regex /etc/fstab | awk '{print $4}')
    sed -i "s|\($device_regex.*$previous_opts\)|\1,$mount_option|" /etc/fstab
else
    echo "Not remediating, because there is no record of $var_removable_partition in /etc/fstab" >&2
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Add noexec Option to Removable Media Partitions [ref]

The noexec mount option prevents the direct execution of binaries on the mounted filesystem. Preventing the direct execution of binaries from removable media (such as a USB key) provides a defense against malicious software that may be present on such untrusted media. Add the noexec option to the fourth column of /etc/fstab for the line which controls mounting of any removable media partitions.

Rationale:

Allowing users to execute binaries from removable media such as USB keys exposes the system to potential compromise.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_mount_option_noexec_removable_partitions

Identifiers:

CCE-92461-3

References:

cis-csc	11, 12, 13, 14, 16, 3, 8, 9
cobit5	APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.06, DSS05.07, DSS06.03, DSS06.06
disa	CCI-000087, CCI-000366
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.11.2.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.7.1.1, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, A.9.2.1
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7
nist-csf	PR.AC-3, PR.AC-6, PR.IP-1, PR.PT-2, PR.PT-3
os-srg	SRG-OS-000480-GPOS-00227
cis	1.1.19

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	high
Reboot:	false
Strategy:	configure

- name: XCCDF Value var_removable_partition # promote to variable
  set_fact:
    var_removable_partition: !!str (N/A)
  tags:
    - always

- name: Ensure permission noexec are set on var_removable_partition
  lineinfile:
    path: /etc/fstab
    regexp: ^\s*({{ var_removable_partition }})\s+([^\s]*)\s+([^\s]*)\s+([^\s]*)(.*)$
    backrefs: true
    line: \1 \2 \3 \4,noexec \5
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92461-3
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_noexec_removable_partitions
  - no_reboot_needed

Remediation Shell script ⇲

Reboot:	false

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_removable_partition='(N/A)'


device_regex="^\s*$var_removable_partition\s\+"
mount_option="noexec"

if grep -q $device_regex /etc/fstab ; then
    previous_opts=$(grep $device_regex /etc/fstab | awk '{print $4}')
    sed -i "s|\($device_regex.*$previous_opts\)|\1,$mount_option|" /etc/fstab
else
    echo "Not remediating, because there is no record of $var_removable_partition in /etc/fstab" >&2
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Add nosuid Option to Removable Media Partitions [ref]

The nosuid mount option prevents set-user-identifier (SUID) and set-group-identifier (SGID) permissions from taking effect. These permissions allow users to execute binaries with the same permissions as the owner and group of the file respectively. Users should not be allowed to introduce SUID and SGID files into the system via partitions mounted from removeable media. Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of any removable media partitions.

Rationale:

The presence of SUID and SGID executables should be tightly controlled. Allowing users to introduce SUID or SGID binaries from partitions mounted off of removable media would allow them to introduce their own highly-privileged programs.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_mount_option_nosuid_removable_partitions

Identifiers:

CCE-85634-4

References:

cis-csc	11, 12, 13, 14, 15, 16, 18, 3, 5, 8, 9
cobit5	APO01.06, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.06, DSS05.07, DSS06.02, DSS06.03, DSS06.06
disa	CCI-000366
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 5.2, SR 7.6
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.11.2.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7
nist-csf	PR.AC-3, PR.AC-4, PR.AC-6, PR.DS-5, PR.IP-1, PR.PT-2, PR.PT-3
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040150
cis	1.1.21
stigref	SV-234999r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	high
Reboot:	false
Strategy:	configure

- name: XCCDF Value var_removable_partition # promote to variable
  set_fact:
    var_removable_partition: !!str (N/A)
  tags:
    - always

- name: Ensure permission nosuid are set on var_removable_partition
  lineinfile:
    path: /etc/fstab
    regexp: ^\s*({{ var_removable_partition }})\s+([^\s]*)\s+([^\s]*)\s+([^\s]*)(.*)$
    backrefs: true
    line: \1 \2 \3 \4,nosuid \5
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85634-4
  - DISA-STIG-SLES-15-040150
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_nosuid_removable_partitions
  - no_reboot_needed

Remediation Shell script ⇲

Reboot:	false

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_removable_partition='(N/A)'


device_regex="^\s*$var_removable_partition\s\+"
mount_option="nosuid"

if grep -q $device_regex /etc/fstab ; then
    previous_opts=$(grep $device_regex /etc/fstab | awk '{print $4}')
    sed -i "s|\($device_regex.*$previous_opts\)|\1,$mount_option|" /etc/fstab
else
    echo "Not remediating, because there is no record of $var_removable_partition in /etc/fstab" >&2
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Add nodev Option to /tmp [ref]

The nodev mount option can be used to prevent device files from being created in /tmp. Legitimate character and block devices should not exist within temporary directories like /tmp. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of /tmp.

Rationale:

The only legitimate location for device files is the /dev directory located on the root partition. The only exception to this is chroot jails.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_mount_option_tmp_nodev

Identifiers:

CCE-92455-5

References:

cis-csc	11, 13, 14, 3, 8, 9
cobit5	APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06
disa	CCI-001764
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7
nist-csf	PR.IP-1, PR.PT-2, PR.PT-3
os-srg	SRG-OS-000368-GPOS-00154
cis	1.1.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	high
Reboot:	false
Strategy:	configure

- name: 'Add nodev Option to /tmp: Check information associated to mountpoint'
  command: findmnt --fstab '/tmp'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  tags:
  - CCE-92455-5
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /tmp: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - CCE-92455-5
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /tmp: If /tmp not mounted, craft mount_info manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /tmp
    - ''
    - ''
    - defaults
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - ("--fstab" | length == 0)
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length == 0)
  tags:
  - CCE-92455-5
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /tmp: Make sure nodev option is part of the to /tmp options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nodev''
      }) }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined and "nodev" not in mount_info.options
  tags:
  - CCE-92455-5
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /tmp: Ensure /tmp is mounted with nodev option'
  mount:
    path: /tmp
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("--fstab"
    | length == 0)
  tags:
  - CCE-92455-5
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nodev
  - no_reboot_needed

Remediation Shell script ⇲

Reboot:	false

# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && findmnt --kernel "/tmp" > /dev/null || findmnt --fstab "/tmp" > /dev/null ); then

function perform_remediation {
    
        # the mount point /tmp has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nodev)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /tmp  defaults,${previous_mount_opts}nodev 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nodev"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nodev|" /etc/fstab
    fi


    if mkdir -p "/tmp"; then
        if mountpoint -q "/tmp"; then
            mount -o remount --target "/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Add noexec Option to /tmp [ref]

The noexec mount option can be used to prevent binaries from being executed out of /tmp. Add the noexec option to the fourth column of /etc/fstab for the line which controls mounting of /tmp.

Rationale:

Allowing users to execute binaries from world-writable directories such as /tmp should never be necessary in normal operation and can expose the system to potential compromise.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_mount_option_tmp_noexec

Identifiers:

CCE-91272-5

References:

cis-csc	11, 13, 14, 3, 8, 9
cobit5	APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06
disa	CCI-001764
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7
nist-csf	PR.IP-1, PR.PT-2, PR.PT-3
os-srg	SRG-OS-000368-GPOS-00154
cis	1.1.3
anssi	R28

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	high
Reboot:	false
Strategy:	configure

- name: 'Add noexec Option to /tmp: Check information associated to mountpoint'
  command: findmnt --fstab '/tmp'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  tags:
  - CCE-91272-5
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /tmp: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - CCE-91272-5
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /tmp: If /tmp not mounted, craft mount_info manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /tmp
    - ''
    - ''
    - defaults
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - ("--fstab" | length == 0)
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length == 0)
  tags:
  - CCE-91272-5
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /tmp: Make sure noexec option is part of the to /tmp
    options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',noexec''
      }) }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined and "noexec" not in mount_info.options
  tags:
  - CCE-91272-5
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /tmp: Ensure /tmp is mounted with noexec option'
  mount:
    path: /tmp
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("--fstab"
    | length == 0)
  tags:
  - CCE-91272-5
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_noexec
  - no_reboot_needed

Remediation Shell script ⇲

Reboot:	false

# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && findmnt --kernel "/tmp" > /dev/null || findmnt --fstab "/tmp" > /dev/null ); then

function perform_remediation {
    
        # the mount point /tmp has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|noexec)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /tmp  defaults,${previous_mount_opts}noexec 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "noexec"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,noexec|" /etc/fstab
    fi


    if mkdir -p "/tmp"; then
        if mountpoint -q "/tmp"; then
            mount -o remount --target "/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Add nosuid Option to /tmp [ref]

The nosuid mount option can be used to prevent execution of setuid programs in /tmp. The SUID and SGID permissions should not be required in these world-writable directories. Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of /tmp.

Rationale:

The presence of SUID and SGID executables should be tightly controlled. Users should not be able to execute SUID or SGID binaries from temporary storage partitions.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_mount_option_tmp_nosuid

Identifiers:

CCE-91273-3

References:

cis-csc	11, 13, 14, 3, 8, 9
cobit5	APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06
disa	CCI-001764
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7
nist-csf	PR.IP-1, PR.PT-2, PR.PT-3
os-srg	SRG-OS-000368-GPOS-00154
cis	1.1.5
anssi	R28

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	high
Reboot:	false
Strategy:	configure

- name: 'Add nosuid Option to /tmp: Check information associated to mountpoint'
  command: findmnt --fstab '/tmp'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  tags:
  - CCE-91273-3
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /tmp: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - CCE-91273-3
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /tmp: If /tmp not mounted, craft mount_info manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /tmp
    - ''
    - ''
    - defaults
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - ("--fstab" | length == 0)
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length == 0)
  tags:
  - CCE-91273-3
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /tmp: Make sure nosuid option is part of the to /tmp
    options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nosuid''
      }) }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined and "nosuid" not in mount_info.options
  tags:
  - CCE-91273-3
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /tmp: Ensure /tmp is mounted with nosuid option'
  mount:
    path: /tmp
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("--fstab"
    | length == 0)
  tags:
  - CCE-91273-3
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nosuid
  - no_reboot_needed

Remediation Shell script ⇲

Reboot:	false

# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && findmnt --kernel "/tmp" > /dev/null || findmnt --fstab "/tmp" > /dev/null ); then

function perform_remediation {
    
        # the mount point /tmp has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /tmp  defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi


    if mkdir -p "/tmp"; then
        if mountpoint -q "/tmp"; then
            mount -o remount --target "/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Add nodev Option to /var/tmp [ref]

The nodev mount option can be used to prevent device files from being created in /var/tmp. Legitimate character and block devices should not exist within temporary directories like /var/tmp. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of /var/tmp.

Rationale:

The only legitimate location for device files is the /dev directory located on the root partition. The only exception to this is chroot jails.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_mount_option_var_tmp_nodev

Identifiers:

CCE-92459-7

References:

disa	CCI-001764
os-srg	SRG-OS-000368-GPOS-00154
cis	1.1.13

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	high
Reboot:	false
Strategy:	configure

- name: 'Add nodev Option to /var/tmp: Check information associated to mountpoint'
  command: findmnt --fstab '/var/tmp'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "/var/tmp" in ansible_mounts | map(attribute="mount") | list
    )
  tags:
  - CCE-92459-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /var/tmp: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - CCE-92459-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /var/tmp: If /var/tmp not mounted, craft mount_info manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /var/tmp
    - ''
    - ''
    - defaults
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - ("--fstab" | length == 0)
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length == 0)
  tags:
  - CCE-92459-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /var/tmp: Make sure nodev option is part of the to /var/tmp
    options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nodev''
      }) }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined and "nodev" not in mount_info.options
  tags:
  - CCE-92459-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /var/tmp: Ensure /var/tmp is mounted with nodev option'
  mount:
    path: /var/tmp
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("--fstab"
    | length == 0)
  tags:
  - CCE-92459-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nodev
  - no_reboot_needed

Remediation Shell script ⇲

Reboot:	false

# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && findmnt --kernel "/var/tmp" > /dev/null || findmnt --fstab "/var/tmp" > /dev/null ); then

function perform_remediation {
    
        # the mount point /var/tmp has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/var/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/var/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /var/tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /var/tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nodev)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /var/tmp  defaults,${previous_mount_opts}nodev 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nodev"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nodev|" /etc/fstab
    fi


    if mkdir -p "/var/tmp"; then
        if mountpoint -q "/var/tmp"; then
            mount -o remount --target "/var/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Add noexec Option to /var/tmp [ref]

The noexec mount option can be used to prevent binaries from being executed out of /var/tmp. Add the noexec option to the fourth column of /etc/fstab for the line which controls mounting of /var/tmp.

Rationale:

Allowing users to execute binaries from world-writable directories such as /var/tmp should never be necessary in normal operation and can expose the system to potential compromise.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_mount_option_var_tmp_noexec

Identifiers:

CCE-91278-2

References:

disa	CCI-001764
os-srg	SRG-OS-000368-GPOS-00154
cis	1.1.12
anssi	R28

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	high
Reboot:	false
Strategy:	configure

- name: 'Add noexec Option to /var/tmp: Check information associated to mountpoint'
  command: findmnt --fstab '/var/tmp'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "/var/tmp" in ansible_mounts | map(attribute="mount") | list
    )
  tags:
  - CCE-91278-2
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /var/tmp: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - CCE-91278-2
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /var/tmp: If /var/tmp not mounted, craft mount_info
    manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /var/tmp
    - ''
    - ''
    - defaults
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - ("--fstab" | length == 0)
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length == 0)
  tags:
  - CCE-91278-2
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /var/tmp: Make sure noexec option is part of the to
    /var/tmp options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',noexec''
      }) }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined and "noexec" not in mount_info.options
  tags:
  - CCE-91278-2
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /var/tmp: Ensure /var/tmp is mounted with noexec option'
  mount:
    path: /var/tmp
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("--fstab"
    | length == 0)
  tags:
  - CCE-91278-2
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_noexec
  - no_reboot_needed

Remediation Shell script ⇲

Reboot:	false

# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && findmnt --kernel "/var/tmp" > /dev/null || findmnt --fstab "/var/tmp" > /dev/null ); then

function perform_remediation {
    
        # the mount point /var/tmp has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/var/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/var/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /var/tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /var/tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|noexec)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /var/tmp  defaults,${previous_mount_opts}noexec 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "noexec"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,noexec|" /etc/fstab
    fi


    if mkdir -p "/var/tmp"; then
        if mountpoint -q "/var/tmp"; then
            mount -o remount --target "/var/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Add nosuid Option to /var/tmp [ref]

The nosuid mount option can be used to prevent execution of setuid programs in /var/tmp. The SUID and SGID permissions should not be required in these world-writable directories. Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of /var/tmp.

Rationale:

The presence of SUID and SGID executables should be tightly controlled. Users should not be able to execute SUID or SGID binaries from temporary storage partitions.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_mount_option_var_tmp_nosuid

Identifiers:

CCE-91279-0

References:

disa	CCI-001764
os-srg	SRG-OS-000368-GPOS-00154
cis	1.1.14
anssi	R28

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	high
Reboot:	false
Strategy:	configure

- name: 'Add nosuid Option to /var/tmp: Check information associated to mountpoint'
  command: findmnt --fstab '/var/tmp'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "/var/tmp" in ansible_mounts | map(attribute="mount") | list
    )
  tags:
  - CCE-91279-0
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /var/tmp: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - CCE-91279-0
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /var/tmp: If /var/tmp not mounted, craft mount_info
    manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /var/tmp
    - ''
    - ''
    - defaults
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - ("--fstab" | length == 0)
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length == 0)
  tags:
  - CCE-91279-0
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /var/tmp: Make sure nosuid option is part of the to
    /var/tmp options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nosuid''
      }) }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined and "nosuid" not in mount_info.options
  tags:
  - CCE-91279-0
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /var/tmp: Ensure /var/tmp is mounted with nosuid option'
  mount:
    path: /var/tmp
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("--fstab"
    | length == 0)
  tags:
  - CCE-91279-0
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nosuid
  - no_reboot_needed

Remediation Shell script ⇲

Reboot:	false

# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && findmnt --kernel "/var/tmp" > /dev/null || findmnt --fstab "/var/tmp" > /dev/null ); then

function perform_remediation {
    
        # the mount point /var/tmp has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/var/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/var/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /var/tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /var/tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /var/tmp  defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi


    if mkdir -p "/var/tmp"; then
        if mountpoint -q "/var/tmp"; then
            mount -o remount --target "/var/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Restrict Programs from Dangerous Execution Patterns Group contains 3 groups and 7 rules

[ref] The recommendations in this section are designed to ensure that the system's features to protect against potentially dangerous program execution are activated. These protections are applied at the system initialization or kernel level, and defend against certain types of badly-configured or compromised programs.

Group Disable Core Dumps Group contains 4 rules

[ref] A core dump file is the memory image of an executable program when it was terminated by the operating system due to errant behavior. In most cases, only software developers legitimately need to access these files. The core dump files may also contain sensitive information, or unnecessarily occupy large amounts of disk space.

Once a hard limit is set in /etc/security/limits.conf, or to a file within the /etc/security/limits.d/ directory, a user cannot increase that limit within his or her own session. If access to core dumps is required, consider restricting them to only certain users or groups. See the limits.conf man page for more information.

The core dumps of setuid programs are further protected. The sysctl variable fs.suid_dumpable controls whether the kernel allows core dumps from these programs at all. The default value of 0 is recommended.

Rule Disable core dump backtraces [ref]

The ProcessSizeMax option in [Coredump] section of /etc/systemd/coredump.conf specifies the maximum size in bytes of a core which will be processed. Core dumps exceeding this size may be stored, but the backtrace will not be generated.

Warning: If the /etc/systemd/coredump.conf file does not already contain the [Coredump] section, the value will not be configured correctly.

Rationale:

A core dump includes a memory image taken at the time the operating system terminates an application. The memory image could contain sensitive data and is generally useful only for developers or system operators trying to debug problems. Enabling core dumps on production systems is not recommended, however there may be overriding operational requirements to enable advanced debuging. Permitting temporary enablement of core dumps during such situations should be reviewed through local needs and policy.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_coredump_disable_backtraces

Identifiers:

CCE-85745-8

References:

disa	CCI-000366
nist	CM-6
ospp	FMT_SMF_EXT.1
pcidss	Req-3.2
os-srg	SRG-OS-000480-GPOS-00227
cis	1.6.1
pcidss4	3.3.1.1

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-85745-8
  - NIST-800-53-CM-6
  - PCI-DSS-Req-3.2
  - PCI-DSSv4-3.3.1.1
  - coredump_disable_backtraces
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: 'Disable core dump backtraces: Make sure Coredump section exist in remediation
    file'
  ansible.builtin.lineinfile:
    path: /etc/systemd/coredump.conf.d/oscap-autoremedy.conf
    line: '[Coredump]'
    create: true
  when: '"systemd" in ansible_facts.packages'
  tags:
  - CCE-85745-8
  - NIST-800-53-CM-6
  - PCI-DSS-Req-3.2
  - PCI-DSSv4-3.3.1.1
  - coredump_disable_backtraces
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Disable core dump backtraces
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/systemd/coredump.conf.d/oscap-autoremedy.conf
      create: true
      regexp: ^\s*ProcessSizeMax\s*=\s*
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/systemd/coredump.conf.d/oscap-autoremedy.conf
    lineinfile:
      path: /etc/systemd/coredump.conf.d/oscap-autoremedy.conf
      create: true
      regexp: ^\s*ProcessSizeMax\s*=\s*
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/systemd/coredump.conf.d/oscap-autoremedy.conf
    lineinfile:
      path: /etc/systemd/coredump.conf.d/oscap-autoremedy.conf
      create: true
      regexp: ^\s*ProcessSizeMax\s*=\s*
      line: ProcessSizeMax=0
      state: present
      insertafter: '[Coredump]'
  when: '"systemd" in ansible_facts.packages'
  tags:
  - CCE-85745-8
  - NIST-800-53-CM-6
  - PCI-DSS-Req-3.2
  - PCI-DSSv4-3.3.1.1
  - coredump_disable_backtraces
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if rpm --quiet -q systemd; then

mkdir -p /etc/systemd/coredump.conf.d/
if [ ! -f "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf" ]; then
   echo "[Coredump]" > "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf"
fi
if [ -e "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*ProcessSizeMax\s*=\s*/Id" "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf"
else
    touch "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf"

cp "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf" "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf.bak"
# Insert at the end of the file
printf '%s\n' "ProcessSizeMax=0" >> "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf"
# Clean up after ourselves.
rm "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable storing core dump [ref]

The Storage option in [Coredump] section of /etc/systemd/coredump.conf or /etc/systemd/coredump.conf.d/*.conf can be set to none to disable storing core dumps permanently.

Warning: If the /etc/systemd/coredump.conf file does not already contain the [Coredump] section, the value will not be configured correctly.

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_coredump_disable_storage

Identifiers:

CCE-85746-6

References:

disa	CCI-000366
nist	CM-6
ospp	FMT_SMF_EXT.1
pcidss	Req-3.2
os-srg	SRG-OS-000480-GPOS-00227
cis	1.6.1
pcidss4	3.3.1.1

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-85746-6
  - NIST-800-53-CM-6
  - PCI-DSS-Req-3.2
  - PCI-DSSv4-3.3.1.1
  - coredump_disable_storage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: 'Disable storing core dump: Make sure Coredump section exist in remediation
    file'
  ansible.builtin.lineinfile:
    path: /etc/systemd/coredump.conf.d/oscap-autoremedy.conf
    line: '[Coredump]'
    create: true
  when: '"systemd" in ansible_facts.packages'
  tags:
  - CCE-85746-6
  - NIST-800-53-CM-6
  - PCI-DSS-Req-3.2
  - PCI-DSSv4-3.3.1.1
  - coredump_disable_storage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Disable storing core dump
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/systemd/coredump.conf.d/oscap-autoremedy.conf
      create: true
      regexp: ^\s*Storage\s*=\s*
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/systemd/coredump.conf.d/oscap-autoremedy.conf
    lineinfile:
      path: /etc/systemd/coredump.conf.d/oscap-autoremedy.conf
      create: true
      regexp: ^\s*Storage\s*=\s*
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/systemd/coredump.conf.d/oscap-autoremedy.conf
    lineinfile:
      path: /etc/systemd/coredump.conf.d/oscap-autoremedy.conf
      create: true
      regexp: ^\s*Storage\s*=\s*
      line: Storage=none
      state: present
      insertafter: '[Coredump]'
  when: '"systemd" in ansible_facts.packages'
  tags:
  - CCE-85746-6
  - NIST-800-53-CM-6
  - PCI-DSS-Req-3.2
  - PCI-DSSv4-3.3.1.1
  - coredump_disable_storage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if rpm --quiet -q systemd; then

mkdir -p /etc/systemd/coredump.conf.d/
if [ ! -f "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf" ]; then
   echo "[Coredump]" > "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf"
fi
if [ -e "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*Storage\s*=\s*/Id" "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf"
else
    touch "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf"

cp "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf" "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf.bak"
# Insert at the end of the file
printf '%s\n' "Storage=none" >> "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf"
# Clean up after ourselves.
rm "/etc/systemd/coredump.conf.d/oscap-autoremedy.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable Core Dumps for All Users [ref]

To disable core dumps for all users, add the following line to /etc/security/limits.conf, or to a file within the /etc/security/limits.d/ directory:

*     hard   core    0

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_disable_users_coredumps

Identifiers:

CCE-85740-9

References:

cis-csc	1, 12, 13, 15, 16, 2, 7, 8
cobit5	APO13.01, BAI04.04, DSS01.03, DSS03.05, DSS05.07
disa	CCI-000366
isa-62443-2013	SR 6.2, SR 7.1, SR 7.2
iso27001-2013	A.12.1.3, A.17.2.1
nist	CM-6, SC-7(10)
nist-csf	DE.CM-1, PR.DS-4
os-srg	SRG-OS-000480-GPOS-00227
cis	1.6.1
pcidss4	3.3.1.1

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-85740-9
  - NIST-800-53-CM-6
  - NIST-800-53-SC-7(10)
  - PCI-DSSv4-3.3.1.1
  - disable_users_coredumps
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Disable core dumps with limits
  lineinfile:
    dest: /etc/security/limits.conf
    regexp: ^[^#].*core
    line: '*        hard       core      0'
    create: true
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-85740-9
  - NIST-800-53-CM-6
  - NIST-800-53-SC-7(10)
  - PCI-DSSv4-3.3.1.1
  - disable_users_coredumps
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

SECURITY_LIMITS_FILE="/etc/security/limits.conf"

if grep -qE '^\s*\*\s+hard\s+core' $SECURITY_LIMITS_FILE; then
        sed -ri 's/(hard\s+core\s+)[[:digit:]]+/\1 0/' $SECURITY_LIMITS_FILE
else
        echo "*     hard   core    0" >> $SECURITY_LIMITS_FILE
fi

if ls /etc/security/limits.d/*.conf > /dev/null; then
        sed -ri '/^\s*\*\s+hard\s+core/d' /etc/security/limits.d/*.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable Core Dumps for SUID programs [ref]

To set the runtime status of the fs.suid_dumpable kernel parameter, run the following command:

$ sudo sysctl -w fs.suid_dumpable=0

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

fs.suid_dumpable = 0

Rationale:

The core dump of a setuid program is more likely to contain sensitive data, as the program itself runs with greater privileges than the user who initiated execution of the program. Disabling the ability for any setuid program to write a core file decreases the risk of unauthorized access of such data.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_fs_suid_dumpable

Identifiers:

CCE-91447-3

References:

hipaa	164.308(a)(1)(ii)(D), 164.308(a)(3), 164.308(a)(4), 164.310(b), 164.310(c), 164.312(a), 164.312(e)
nist	SI-11(a), SI-11(b)
cis	1.6.1
anssi	R14
pcidss4	3.3.1.1

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*fs.suid_dumpable.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91447-3
  - NIST-800-53-SI-11(a)
  - NIST-800-53-SI-11(b)
  - PCI-DSSv4-3.3.1.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_fs_suid_dumpable

- name: Comment out any occurrences of fs.suid_dumpable from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*fs.suid_dumpable
    replace: '#fs.suid_dumpable'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91447-3
  - NIST-800-53-SI-11(a)
  - NIST-800-53-SI-11(b)
  - PCI-DSSv4-3.3.1.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_fs_suid_dumpable

- name: Comment out any occurrences of fs.suid_dumpable from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*fs.suid_dumpable
    replace: '#fs.suid_dumpable'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91447-3
  - NIST-800-53-SI-11(a)
  - NIST-800-53-SI-11(b)
  - PCI-DSSv4-3.3.1.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_fs_suid_dumpable

- name: Ensure sysctl fs.suid_dumpable is set to 0
  sysctl:
    name: fs.suid_dumpable
    value: '0'
    sysctl_file: /etc/sysctl.d/fs_suid_dumpable.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91447-3
  - NIST-800-53-SI-11(a)
  - NIST-800-53-SI-11(b)
  - PCI-DSSv4-3.3.1.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_fs_suid_dumpable

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of fs.suid_dumpable from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*fs.suid_dumpable.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "fs.suid_dumpable" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/fs_suid_dumpable.conf'


#
# Set runtime for fs.suid_dumpable
#
/sbin/sysctl -q -n -w fs.suid_dumpable="0"

#
# If fs.suid_dumpable present in /etc/sysctl.conf, change value to "0"
#	else, add "fs.suid_dumpable = 0" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^fs.suid_dumpable")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^fs.suid_dumpable\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^fs.suid_dumpable\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-91447-3"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Enable ExecShield Group contains 1 rule

[ref] ExecShield describes kernel features that provide protection against exploitation of memory corruption errors such as buffer overflows. These features include random placement of the stack and other memory regions, prevention of execution in memory that should only hold data, and special handling of text buffers. These protections are enabled by default on 32-bit systems and controlled through sysctl variables kernel.exec-shield and kernel.randomize_va_space. On the latest 64-bit systems, kernel.exec-shield cannot be enabled or disabled with sysctl.

Rule Enable Randomized Layout of Virtual Address Space [ref]

To set the runtime status of the kernel.randomize_va_space kernel parameter, run the following command:

$ sudo sysctl -w kernel.randomize_va_space=2

To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:

kernel.randomize_va_space = 2

Rationale:

Address space layout randomization (ASLR) makes it more difficult for an attacker to predict the location of attack code they have introduced into a process's address space during an attempt at exploitation. Additionally, ASLR makes it more difficult for an attacker to know the location of existing code in order to re-purpose it using return oriented programming (ROP) techniques.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sysctl_kernel_randomize_va_space

Identifiers:

CCE-83300-4

References:

cui	3.1.7
disa	CCI-000366, CCI-002824
hipaa	164.308(a)(1)(ii)(D), 164.308(a)(3), 164.308(a)(4), 164.310(b), 164.310(c), 164.312(a), 164.312(e)
nerc-cip	CIP-002-5 R1.1, CIP-002-5 R1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 4.1, CIP-004-6 4.2, CIP-004-6 R2.2.3, CIP-004-6 R2.2.4, CIP-004-6 R2.3, CIP-004-6 R4, CIP-005-6 R1, CIP-005-6 R1.1, CIP-005-6 R1.2, CIP-007-3 R3, CIP-007-3 R3.1, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, CIP-007-3 R8.4, CIP-009-6 R.1.1, CIP-009-6 R4
nist	SC-30, SC-30(2), CM-6(a)
pcidss	Req-2.2.1
os-srg	SRG-OS-000433-GPOS-00193, SRG-OS-000480-GPOS-00227
app-srg-ctr	SRG-APP-000450-CTR-001105
stigid	SLES-15-010550
cis	1.6.3
anssi	R9
pcidss4	3.3.1.1
stigref	SV-234862r854208_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /run/sysctl.d/
    - /etc/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /lib/sysctl.d/
    contains: ^[\s]*kernel.randomize_va_space.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83300-4
  - DISA-STIG-SLES-15-010550
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-30
  - NIST-800-53-SC-30(2)
  - PCI-DSS-Req-2.2.1
  - PCI-DSSv4-3.3.1.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_randomize_va_space

- name: Comment out any occurrences of kernel.randomize_va_space from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*kernel.randomize_va_space
    replace: '#kernel.randomize_va_space'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83300-4
  - DISA-STIG-SLES-15-010550
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-30
  - NIST-800-53-SC-30(2)
  - PCI-DSS-Req-2.2.1
  - PCI-DSSv4-3.3.1.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_randomize_va_space

- name: Comment out any occurrences of kernel.randomize_va_space from /etc/sysctl.conf
  replace:
    path: /etc/sysctl.conf
    regexp: ^[\s]*kernel.randomize_va_space
    replace: '#kernel.randomize_va_space'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83300-4
  - DISA-STIG-SLES-15-010550
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-30
  - NIST-800-53-SC-30(2)
  - PCI-DSS-Req-2.2.1
  - PCI-DSSv4-3.3.1.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_randomize_va_space

- name: Ensure sysctl kernel.randomize_va_space is set to 2
  sysctl:
    name: kernel.randomize_va_space
    value: '2'
    sysctl_file: /etc/sysctl.d/kernel_randomize_va_space.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83300-4
  - DISA-STIG-SLES-15-010550
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-30
  - NIST-800-53-SC-30(2)
  - PCI-DSS-Req-2.2.1
  - PCI-DSSv4-3.3.1.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_randomize_va_space

Remediation Shell script ⇲

Complexity:	low
Disruption:	medium
Reboot:	true
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of kernel.randomize_va_space from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.randomize_va_space.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.randomize_va_space" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE='/etc/sysctl.d/kernel_randomize_va_space.conf'


#
# Set runtime for kernel.randomize_va_space
#
/sbin/sysctl -q -n -w kernel.randomize_va_space="2"

#
# If kernel.randomize_va_space present in /etc/sysctl.conf, change value to "2"
#	else, add "kernel.randomize_va_space = 2" to /etc/sysctl.conf
#

sed -i "/^$SYSCONFIG_VAR/d" /etc/sysctl.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.randomize_va_space")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "2"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.randomize_va_space\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.randomize_va_space\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83300-4"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Enable Execute Disable (XD) or No Execute (NX) Support on x86 Systems Group contains 2 rules

[ref] Recent processors in the x86 family support the ability to prevent code execution on a per memory page basis. Generically and on AMD processors, this ability is called No Execute (NX), while on Intel processors it is called Execute Disable (XD). This ability can help prevent exploitation of buffer overflow vulnerabilities and should be activated whenever possible. Extra steps must be taken to ensure that this protection is enabled, particularly on 32-bit x86 systems. Other processors, such as Itanium and POWER, have included such support since inception and the standard kernel for those platforms supports the feature. This is enabled by default on the latest Oracle Linux, Red Hat and Fedora systems if supported by the hardware.

Rule Enable NX or XD Support in the BIOS [ref]

Reboot the system and enter the BIOS or Setup configuration menu. Navigate the BIOS configuration menu and make sure that the option is enabled. The setting may be located under a Security section. Look for Execute Disable (XD) on Intel-based systems and No Execute (NX) on AMD-based systems.

Rationale:

Computers with the ability to prevent this type of code execution frequently put an option in the BIOS that will allow users to turn the feature on or off at will.

Severity:

medium

Rule ID:

xccdf_org.ssgproject.content_rule_bios_enable_execution_restrictions

Identifiers:

CCE-91254-3

References:

cis-csc	11, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05
cui	3.1.7
disa	CCI-002824
isa-62443-2009	4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4
nist	SC-39, CM-6(a)
nist-csf	PR.IP-1
os-srg	SRG-OS-000433-GPOS-00192
app-srg-ctr	SRG-APP-000450-CTR-001105
cis	1.6.2
pcidss4	2.2.1

Rule Install PAE Kernel on Supported 32-bit x86 Systems [ref]

Systems that are using the 64-bit x86 kernel package do not need to install the kernel-PAE package because the 64-bit x86 kernel already includes this support. However, if the system is 32-bit and also supports the PAE and NX features as determined in the previous section, the kernel-PAE package should be installed to enable XD or NX support. The kernel-PAE package can be installed with the following command:

$ sudo zypper install kernel-PAE

The installation process should also have configured the bootloader to load the new kernel at boot. Verify this after reboot and modify /etc/default/grub if necessary.

Warning: The kernel-PAE package should not be installed on older systems that do not support the XD or NX bit, as 8this may prevent them from booting.8

Rationale:

On 32-bit systems that support the XD or NX bit, the vendor-supplied PAE kernel is required to enable either Execute Disable (XD) or No Execute (NX) support.

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_install_PAE_kernel_on_x86-32

Identifiers:

CCE-91255-0

References:

cis-csc	11, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05
cui	3.1.7
isa-62443-2009	4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4
nist	CM-6(a)
nist-csf	PR.IP-1
cis	1.6.2
anssi	R1
pcidss4	2.2.1

Group Services Group contains 43 groups and 99 rules

[ref] The best protection against vulnerable software is running less software. This section describes how to review the software which SUSE Linux Enterprise 15 installs on a system and disable software which is not needed. It then enumerates the software packages installed on a default SUSE Linux Enterprise 15 system and provides guidance about which ones can be safely disabled.

SUSE Linux Enterprise 15 provides a convenient minimal install option that essentially installs the bare necessities for a functional system. When building SUSE Linux Enterprise 15 systems, it is highly recommended to select the minimal packages and then build up the system from there.

Group Avahi Server Group contains 1 group and 3 rules

[ref] The Avahi daemon implements the DNS Service Discovery and Multicast DNS protocols, which provide service and host discovery on a network. It allows a system to automatically identify resources on the network, such as printers or web servers. This capability is also known as mDNSresponder and is a major part of Zeroconf networking.

Group Disable Avahi Server if Possible Group contains 3 rules

[ref] Because the Avahi daemon service keeps an open network port, it is subject to network attacks. Disabling it can reduce the system's vulnerability to such attacks.

Rule Uninstall avahi-autoipd Server Package [ref]

If the system does not need to have an Avahi server which implements the DNS Service Discovery and Multicast DNS protocols, the avahi-autoipd and avahi packages can be uninstalled.

Rationale:

Automatic discovery of network services is not normally required for system functionality. It is recommended to remove this package to reduce the potential attack surface.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_avahi-autoipd_removed

Identifiers:

CCE-92465-4

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
disa	CCI-000366
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	2.2.3

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure avahi-autoipd is removed
  package:
    name: avahi-autoipd
    state: absent
  tags:
  - CCE-92465-4
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_avahi-autoipd_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_avahi-autoipd

class remove_avahi-autoipd {
  package { 'avahi-autoipd':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove avahi-autoipd
#	   from the system, and may remove any packages
#	   that depend on avahi-autoipd. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "avahi-autoipd"

Rule Uninstall avahi Server Package [ref]

If the system does not need to have an Avahi server which implements the DNS Service Discovery and Multicast DNS protocols, the avahi-autoipd and avahi packages can be uninstalled.

Rationale:

Automatic discovery of network services is not normally required for system functionality. It is recommended to remove this package to reduce the potential attack surface.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_avahi_removed

Identifiers:

CCE-92464-7

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
disa	CCI-000366
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	2.2.3

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure avahi is removed
  package:
    name: avahi
    state: absent
  tags:
  - CCE-92464-7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_avahi_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_avahi

class remove_avahi {
  package { 'avahi':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove avahi
#	   from the system, and may remove any packages
#	   that depend on avahi. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "avahi"

Rule Disable Avahi Server Software [ref]

The avahi-daemon service can be disabled with the following command:

$ sudo systemctl mask --now avahi-daemon.service

Rationale:

Because the Avahi daemon service keeps an open network port, it is subject to network attacks. Its functionality is convenient but is only appropriate if the local network can be trusted.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_service_avahi-daemon_disabled

Identifiers:

CCE-91321-0

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
disa	CCI-000366
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	2.2.3
pcidss4	2.2.4

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
masked = ["avahi-daemon"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91321-0
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_avahi-daemon_disabled

- name: Disable Avahi Server Software - Collect systemd Services Present in the System
  ansible.builtin.command: systemctl -q list-unit-files --type service
  register: service_exists
  changed_when: false
  failed_when: service_exists.rc not in [0, 1]
  check_mode: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "avahi" in ansible_facts.packages )
  tags:
  - CCE-91321-0
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_avahi-daemon_disabled

- name: Disable Avahi Server Software - Ensure avahi-daemon.service is Masked
  ansible.builtin.systemd:
    name: avahi-daemon.service
    state: stopped
    enabled: false
    masked: true
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "avahi" in ansible_facts.packages )
  - service_exists.stdout_lines is search("avahi-daemon.service", multiline=True)
  tags:
  - CCE-91321-0
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_avahi-daemon_disabled

- name: Unit Socket Exists - avahi-daemon.socket
  ansible.builtin.command: systemctl -q list-unit-files avahi-daemon.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "avahi" in ansible_facts.packages )
  tags:
  - CCE-91321-0
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_avahi-daemon_disabled

- name: Disable Avahi Server Software - Disable Socket avahi-daemon
  ansible.builtin.systemd:
    name: avahi-daemon.socket
    enabled: false
    state: stopped
    masked: true
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "avahi" in ansible_facts.packages )
  - socket_file_exists.stdout_lines is search("avahi-daemon.socket", multiline=True)
  tags:
  - CCE-91321-0
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_avahi-daemon_disabled

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include disable_avahi-daemon

class disable_avahi-daemon {
  service {'avahi-daemon':
    enable => false,
    ensure => 'stopped',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q avahi ); then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'avahi-daemon.service'
"$SYSTEMCTL_EXEC" disable 'avahi-daemon.service'
"$SYSTEMCTL_EXEC" mask 'avahi-daemon.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files avahi-daemon.socket; then
    "$SYSTEMCTL_EXEC" stop 'avahi-daemon.socket'
    "$SYSTEMCTL_EXEC" mask 'avahi-daemon.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'avahi-daemon.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Cron and At Daemons Group contains 1 group and 28 rules

[ref] The cron and at services are used to allow commands to be executed at a later time. The cron service is required by almost all systems to perform necessary maintenance tasks, while at may or may not be required on a given system. Both daemons should be configured defensively.

Group Restrict at and cron to Authorized Users if Necessary Group contains 8 rules

[ref] The /etc/cron.allow and /etc/at.allow files contain lists of users who are allowed to use cron and at to delay execution of processes. If these files exist and if the corresponding files /etc/cron.deny and /etc/at.deny do not exist, then only users listed in the relevant allow files can run the crontab and at commands to submit jobs to be run at scheduled intervals. On many systems, only the system administrator needs the ability to schedule jobs. Note that even if a given user is not listed in cron.allow, cron jobs can still be run as that user. The cron.allow file controls only administrative access to the crontab command for scheduling and modifying cron jobs.

To restrict at and cron to only authorized users:

Remove the cron.deny file:
```
$ sudo rm /etc/cron.deny
```
Edit /etc/cron.allow, adding one line for each user allowed to use the crontab command to create cron jobs.
Remove the at.deny file:
```
$ sudo rm /etc/at.deny
```
Edit /etc/at.allow, adding one line for each user allowed to use the at command to create at jobs.

Rule Ensure that /etc/at.deny does not exist [ref]

The file /etc/at.deny should not exist. Use /etc/at.allow instead.

Rationale:

Access to at should be restricted. It is easier to manage an allow list than a deny list.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_at_deny_not_exist

Identifiers:

CCE-91313-7

References:

cis	5.1.9
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Remove /etc/at.deny
  file:
    path: /etc/at.deny
    state: absent
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91313-7
  - PCI-DSSv4-2.2.6
  - disable_strategy
  - file_at_deny_not_exist
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [[ -f  /etc/at.deny ]]; then
        rm /etc/at.deny
    fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure that /etc/cron.deny does not exist [ref]

The file /etc/cron.deny should not exist. Use /etc/cron.allow instead.

Rationale:

Access to cron should be restricted. It is easier to manage an allow list than a deny list.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_cron_deny_not_exist

Identifiers:

CCE-91314-5

References:

cis	5.1.8
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Remove /etc/cron.deny
  file:
    path: /etc/cron.deny
    state: absent
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91314-5
  - PCI-DSSv4-2.2.6
  - disable_strategy
  - file_cron_deny_not_exist
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [[ -f  /etc/cron.deny ]]; then
        rm /etc/cron.deny
    fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Group Who Owns /etc/at.allow file [ref]

If /etc/at.allow exists, it must be group-owned by root. To properly set the group owner of /etc/at.allow, run the command:

$ sudo chgrp root /etc/at.allow

Rationale:

If the owner of the at.allow file is not set to root, the possibility exists for an unauthorized user to view or edit sensitive information.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_at_allow

Identifiers:

CCE-91315-2

References:

cis	5.1.9
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/at.allow
  stat:
    path: /etc/at.allow
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91315-2
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_at_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/at.allow
  file:
    path: /etc/at.allow
    group: '0'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91315-2
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_at_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chgrp 0 /etc/at.allow

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Group Who Owns /etc/cron.allow file [ref]

If /etc/cron.allow exists, it must be group-owned by root. To properly set the group owner of /etc/cron.allow, run the command:

$ sudo chgrp root /etc/cron.allow

Rationale:

If the owner of the cron.allow file is not set to root, the possibility exists for an unauthorized user to view or edit sensitive information.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_cron_allow

Identifiers:

CCE-91316-0

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
disa	CCI-000366
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.8
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/cron.allow
  stat:
    path: /etc/cron.allow
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91316-0
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_cron_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/cron.allow
  file:
    path: /etc/cron.allow
    group: '0'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91316-0
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_cron_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chgrp 0 /etc/cron.allow

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify User Who Owns /etc/at.allow file [ref]

If /etc/at.allow exists, it must be owned by root. To properly set the owner of /etc/at.allow, run the command:

$ sudo chown root /etc/at.allow

Rationale:

If the owner of the at.allow file is not set to root, the possibility exists for an unauthorized user to view or edit sensitive information.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_at_allow

Identifiers:

CCE-91317-8

References:

cis	5.1.9
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/at.allow
  stat:
    path: /etc/at.allow
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91317-8
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_at_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/at.allow
  file:
    path: /etc/at.allow
    owner: '0'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91317-8
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_at_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chown 0 /etc/at.allow

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify User Who Owns /etc/cron.allow file [ref]

If /etc/cron.allow exists, it must be owned by root. To properly set the owner of /etc/cron.allow, run the command:

$ sudo chown root /etc/cron.allow

Rationale:

If the owner of the cron.allow file is not set to root, the possibility exists for an unauthorized user to view or edit sensitive information.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_cron_allow

Identifiers:

CCE-91318-6

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
disa	CCI-000366
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.8
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/cron.allow
  stat:
    path: /etc/cron.allow
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91318-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_cron_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/cron.allow
  file:
    path: /etc/cron.allow
    owner: '0'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91318-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_cron_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chown 0 /etc/cron.allow

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Permissions on /etc/at.allow file [ref]

If /etc/at.allow exists, it must have permissions 0640 or more restrictive. To properly set the permissions of /etc/at.allow, run the command:

$ sudo chmod 0640 /etc/at.allow

Rationale:

If the permissions of the at.allow file are not set to 0640 or more restrictive, the possibility exists for an unauthorized user to view or edit sensitive information.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_at_allow

Identifiers:

CCE-91319-4

References:

cis	5.1.9
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/at.allow
  stat:
    path: /etc/at.allow
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91319-4
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_at_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwrt on /etc/at.allow
  file:
    path: /etc/at.allow
    mode: u-xs,g-xws,o-xwrt
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91319-4
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_at_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chmod u-xs,g-xws,o-xwrt /etc/at.allow

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Permissions on /etc/cron.allow file [ref]

If /etc/cron.allow exists, it must have permissions 0640 or more restrictive. To properly set the permissions of /etc/cron.allow, run the command:

$ sudo chmod 0640 /etc/cron.allow

Rationale:

If the permissions of the cron.allow file are not set to 0640 or more restrictive, the possibility exists for an unauthorized user to view or edit sensitive information.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_cron_allow

Identifiers:

CCE-91320-2

References:

os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.8
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/cron.allow
  stat:
    path: /etc/cron.allow
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91320-2
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwrt on /etc/cron.allow
  file:
    path: /etc/cron.allow
    mode: u-xs,g-xws,o-xwrt
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91320-2
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chmod u-xs,g-xws,o-xwrt /etc/cron.allow

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Install the cron service [ref]

The Cron service should be installed.

Rationale:

The cron service allow periodic job execution, needed for almost all administrative tasks and services (software update, log rotating, etc.). Access to cron service should be restricted to administrative accounts only.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_cron_installed

Identifiers:

CCE-91379-8

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
hipaa	164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	5.1.1

Remediation OSBuild Blueprint snippet ⇲


[[packages]]
name = "cronie"
version = "*"

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

- name: Ensure cronie is installed
  package:
    name: cronie
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91379-8
  - NIST-800-53-CM-6(a)
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_cron_installed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include install_cronie

class install_cronie {
  package { 'cronie':
    ensure => 'installed',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

zypper install -y "cronie"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Enable cron Service [ref]

The crond service is used to execute commands at preconfigured times. It is required by almost all systems to perform necessary maintenance tasks, such as notifying root of system activity. The cron service can be enabled with the following command:

$ sudo systemctl enable cron.service

Rationale:

Due to its usage for maintenance and security-supporting tasks, enabling the cron daemon is essential.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_service_cron_enabled

Identifiers:

CCE-91437-4

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
hipaa	164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	5.1.1

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
enabled = ["cron"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

- name: Enable cron Service - Enable service cron
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Enable cron Service - Enable Service cron
    ansible.builtin.systemd:
      name: cron
      enabled: true
      state: started
      masked: false
    when:
    - '"cron" in ansible_facts.packages'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91437-4
  - NIST-800-53-CM-6(a)
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_cron_enabled

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include enable_cron

class enable_cron {
  service {'cron':
    enable => true,
    ensure => 'running',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'cron.service'
"$SYSTEMCTL_EXEC" start 'cron.service'
"$SYSTEMCTL_EXEC" enable 'cron.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Group Who Owns cron.d [ref]

To properly set the group owner of /etc/cron.d, run the command:

$ sudo chgrp root /etc/cron.d

Rationale:

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_cron_d

Identifiers:

CCE-91391-3

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.7
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Ensure group owner on /etc/cron.d/
  file:
    path: /etc/cron.d/
    state: directory
    group: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91391-3
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_cron_d
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.d/ -maxdepth 1 -type d -exec chgrp 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Group Who Owns cron.daily [ref]

To properly set the group owner of /etc/cron.daily, run the command:

$ sudo chgrp root /etc/cron.daily

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_cron_daily

Identifiers:

CCE-91385-5

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.4
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Ensure group owner on /etc/cron.daily/
  file:
    path: /etc/cron.daily/
    state: directory
    group: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91385-5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_cron_daily
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.daily/ -maxdepth 1 -type d -exec chgrp 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Group Who Owns cron.hourly [ref]

To properly set the group owner of /etc/cron.hourly, run the command:

$ sudo chgrp root /etc/cron.hourly

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_cron_hourly

Identifiers:

CCE-91382-2

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.3
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Ensure group owner on /etc/cron.hourly/
  file:
    path: /etc/cron.hourly/
    state: directory
    group: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91382-2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_cron_hourly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.hourly/ -maxdepth 1 -type d -exec chgrp 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Group Who Owns cron.monthly [ref]

To properly set the group owner of /etc/cron.monthly, run the command:

$ sudo chgrp root /etc/cron.monthly

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_cron_monthly

Identifiers:

CCE-91388-9

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.6
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Ensure group owner on /etc/cron.monthly/
  file:
    path: /etc/cron.monthly/
    state: directory
    group: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91388-9
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_cron_monthly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.monthly/ -maxdepth 1 -type d -exec chgrp 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Group Who Owns cron.weekly [ref]

To properly set the group owner of /etc/cron.weekly, run the command:

$ sudo chgrp root /etc/cron.weekly

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_cron_weekly

Identifiers:

CCE-91386-3

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.5
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Ensure group owner on /etc/cron.weekly/
  file:
    path: /etc/cron.weekly/
    state: directory
    group: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91386-3
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_cron_weekly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.weekly/ -maxdepth 1 -type d -exec chgrp 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Group Who Owns Crontab [ref]

To properly set the group owner of /etc/crontab, run the command:

$ sudo chgrp root /etc/crontab

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_crontab

Identifiers:

CCE-91380-6

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.2
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/crontab
  stat:
    path: /etc/crontab
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91380-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_crontab
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/crontab
  file:
    path: /etc/crontab
    group: '0'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91380-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_crontab
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chgrp 0 /etc/crontab

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Owner on cron.d [ref]

To properly set the owner of /etc/cron.d, run the command:

$ sudo chown root /etc/cron.d

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_cron_d

Identifiers:

CCE-91390-5

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.7
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Ensure owner on directory /etc/cron.d/
  file:
    path: /etc/cron.d/
    state: directory
    owner: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91390-5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_cron_d
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.d/ -maxdepth 1 -type d -exec chown 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Owner on cron.daily [ref]

To properly set the owner of /etc/cron.daily, run the command:

$ sudo chown root /etc/cron.daily

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_cron_daily

Identifiers:

CCE-91384-8

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.4
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Ensure owner on directory /etc/cron.daily/
  file:
    path: /etc/cron.daily/
    state: directory
    owner: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91384-8
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_cron_daily
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.daily/ -maxdepth 1 -type d -exec chown 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Owner on cron.hourly [ref]

To properly set the owner of /etc/cron.hourly, run the command:

$ sudo chown root /etc/cron.hourly

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_cron_hourly

Identifiers:

CCE-91383-0

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.3
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Ensure owner on directory /etc/cron.hourly/
  file:
    path: /etc/cron.hourly/
    state: directory
    owner: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91383-0
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_cron_hourly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.hourly/ -maxdepth 1 -type d -exec chown 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Owner on cron.monthly [ref]

To properly set the owner of /etc/cron.monthly, run the command:

$ sudo chown root /etc/cron.monthly

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_cron_monthly

Identifiers:

CCE-91389-7

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.6
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Ensure owner on directory /etc/cron.monthly/
  file:
    path: /etc/cron.monthly/
    state: directory
    owner: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91389-7
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_cron_monthly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.monthly/ -maxdepth 1 -type d -exec chown 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Owner on cron.weekly [ref]

To properly set the owner of /etc/cron.weekly, run the command:

$ sudo chown root /etc/cron.weekly

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_cron_weekly

Identifiers:

CCE-91387-1

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.5
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Ensure owner on directory /etc/cron.weekly/
  file:
    path: /etc/cron.weekly/
    state: directory
    owner: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91387-1
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_cron_weekly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.weekly/ -maxdepth 1 -type d -exec chown 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Owner on crontab [ref]

To properly set the owner of /etc/crontab, run the command:

$ sudo chown root /etc/crontab

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_crontab

Identifiers:

CCE-91381-4

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.2
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/crontab
  stat:
    path: /etc/crontab
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91381-4
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_crontab
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/crontab
  file:
    path: /etc/crontab
    owner: '0'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91381-4
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_crontab
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chown 0 /etc/crontab

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Permissions on cron.d [ref]

To properly set the permissions of /etc/cron.d, run the command:

$ sudo chmod 0700 /etc/cron.d

Rationale:

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_cron_d

Identifiers:

CCE-91304-6

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.7
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Find /etc/cron.d/ file(s)
  command: 'find -H /etc/cron.d/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt  -type d '
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91304-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_d
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set permissions for /etc/cron.d/ file(s)
  file:
    path: '{{ item }}'
    mode: u-s,g-xwrs,o-xwrt
    state: directory
  with_items:
  - '{{ files_found.stdout_lines }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91304-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_d
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.d/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Permissions on cron.daily [ref]

To properly set the permissions of /etc/cron.daily, run the command:

$ sudo chmod 0700 /etc/cron.daily

Rationale:

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_cron_daily

Identifiers:

CCE-91301-2

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.4
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Find /etc/cron.daily/ file(s)
  command: 'find -H /etc/cron.daily/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt  -type d '
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91301-2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_daily
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set permissions for /etc/cron.daily/ file(s)
  file:
    path: '{{ item }}'
    mode: u-s,g-xwrs,o-xwrt
    state: directory
  with_items:
  - '{{ files_found.stdout_lines }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91301-2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_daily
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.daily/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Permissions on cron.hourly [ref]

To properly set the permissions of /etc/cron.hourly, run the command:

$ sudo chmod 0700 /etc/cron.hourly

Rationale:

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_cron_hourly

Identifiers:

CCE-91300-4

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.3
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Find /etc/cron.hourly/ file(s)
  command: 'find -H /etc/cron.hourly/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt  -type
    d '
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91300-4
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_hourly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set permissions for /etc/cron.hourly/ file(s)
  file:
    path: '{{ item }}'
    mode: u-s,g-xwrs,o-xwrt
    state: directory
  with_items:
  - '{{ files_found.stdout_lines }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91300-4
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_hourly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.hourly/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Permissions on cron.monthly [ref]

To properly set the permissions of /etc/cron.monthly, run the command:

$ sudo chmod 0700 /etc/cron.monthly

Rationale:

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_cron_monthly

Identifiers:

CCE-91303-8

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.6
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Find /etc/cron.monthly/ file(s)
  command: 'find -H /etc/cron.monthly/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt  -type
    d '
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91303-8
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_monthly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set permissions for /etc/cron.monthly/ file(s)
  file:
    path: '{{ item }}'
    mode: u-s,g-xwrs,o-xwrt
    state: directory
  with_items:
  - '{{ files_found.stdout_lines }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91303-8
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_monthly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.monthly/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Permissions on cron.weekly [ref]

To properly set the permissions of /etc/cron.weekly, run the command:

$ sudo chmod 0700 /etc/cron.weekly

Rationale:

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_cron_weekly

Identifiers:

CCE-91302-0

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.5
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Find /etc/cron.weekly/ file(s)
  command: 'find -H /etc/cron.weekly/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt  -type
    d '
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91302-0
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_weekly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set permissions for /etc/cron.weekly/ file(s)
  file:
    path: '{{ item }}'
    mode: u-s,g-xwrs,o-xwrt
    state: directory
  with_items:
  - '{{ files_found.stdout_lines }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91302-0
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_weekly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.weekly/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Permissions on crontab [ref]

To properly set the permissions of /etc/crontab, run the command:

$ sudo chmod 0600 /etc/crontab

Rationale:

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_crontab

Identifiers:

CCE-91299-8

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.1.2
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/crontab
  stat:
    path: /etc/crontab
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91299-8
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_crontab
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xwrs,o-xwrt on /etc/crontab
  file:
    path: /etc/crontab
    mode: u-xs,g-xwrs,o-xwrt
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91299-8
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_crontab
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chmod u-xs,g-xwrs,o-xwrt /etc/crontab

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group DHCP Group contains 2 groups and 3 rules

[ref] The Dynamic Host Configuration Protocol (DHCP) allows systems to request and obtain an IP address and other configuration parameters from a server.

This guide recommends configuring networking on clients by manually editing the appropriate files under /etc/sysconfig. Use of DHCP can make client systems vulnerable to compromise by rogue DHCP servers, and should be avoided unless necessary. If using DHCP is necessary, however, there are best practices that should be followed to minimize security risk.

Group Disable DHCP Client Group contains 1 rule

[ref] DHCP is the default network configuration method provided by the system installer, and common on many networks. Nevertheless, manual management of IP addresses for systems implies a greater degree of management and accountability for network activity.

Rule Uninstall DHCP Client Package [ref]

If the system does not need to act as a DHCP client, the dhcp-client package can be uninstalled. The dhcp-client package can be removed with the following command:

$ sudo zypper remove dhcp-client

Rationale:

Removing the DHCP client is necessary when the system works or will work in a static network environment. In this case the system has/will have a static IP address assigned.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_dhcp_client_removed

Identifiers:

CCE-92511-5

References:

cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
disa	CCI-000366
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	2.2.5

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure dhcp-client is removed
  package:
    name: dhcp-client
    state: absent
  tags:
  - CCE-92511-5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_dhcp_client_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_dhcp-client

class remove_dhcp-client {
  package { 'dhcp-client':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove dhcp-client
#	   from the system, and may remove any packages
#	   that depend on dhcp-client. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "dhcp-client"

Group Disable DHCP Server Group contains 2 rules

[ref] The DHCP server dhcpd is not installed or activated by default. If the software was installed and activated, but the system does not need to act as a DHCP server, it should be disabled and removed.

Rule Uninstall DHCP Server Package [ref]

If the system does not need to act as a DHCP server, the dhcp package can be uninstalled. The dhcp-server package can be removed with the following command:

$ sudo zypper remove dhcp-server

Rationale:

Removing the DHCP server ensures that it cannot be easily or accidentally reactivated and disrupt network operation.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_dhcp_removed

Identifiers:

CCE-85759-9

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
disa	CCI-000366
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	2.2.5
anssi	R62
pcidss4	2.2.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure dhcp-server is removed
  package:
    name: dhcp-server
    state: absent
  tags:
  - CCE-85759-9
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_dhcp_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_dhcp-server

class remove_dhcp-server {
  package { 'dhcp-server':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove dhcp-server
#	   from the system, and may remove any packages
#	   that depend on dhcp-server. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "dhcp-server"

Rule Disable DHCP Service [ref]

The dhcpd service should be disabled on any system that does not need to act as a DHCP server. The dhcpd service can be disabled with the following command:

$ sudo systemctl mask --now dhcpd.service

Rationale:

Unmanaged or unintentionally activated DHCP servers may provide faulty information to clients, interfering with the operation of a legitimate site DHCP server if there is one.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_service_dhcpd_disabled

Identifiers:

CCE-91363-2

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
disa	CCI-000366
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	2.2.5

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
masked = ["dhcpd"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Disable DHCP Service - Collect systemd Services Present in the System
  ansible.builtin.command: systemctl -q list-unit-files --type service
  register: service_exists
  changed_when: false
  failed_when: service_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91363-2
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_dhcpd_disabled

- name: Disable DHCP Service - Ensure dhcpd.service is Masked
  ansible.builtin.systemd:
    name: dhcpd.service
    state: stopped
    enabled: false
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - service_exists.stdout_lines is search("dhcpd.service", multiline=True)
  tags:
  - CCE-91363-2
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_dhcpd_disabled

- name: Unit Socket Exists - dhcpd.socket
  ansible.builtin.command: systemctl -q list-unit-files dhcpd.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91363-2
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_dhcpd_disabled

- name: Disable DHCP Service - Disable Socket dhcpd
  ansible.builtin.systemd:
    name: dhcpd.socket
    enabled: false
    state: stopped
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - socket_file_exists.stdout_lines is search("dhcpd.socket", multiline=True)
  tags:
  - CCE-91363-2
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_dhcpd_disabled

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include disable_dhcpd

class disable_dhcpd {
  service {'dhcpd':
    enable => false,
    ensure => 'stopped',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'dhcpd.service'
"$SYSTEMCTL_EXEC" disable 'dhcpd.service'
"$SYSTEMCTL_EXEC" mask 'dhcpd.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files dhcpd.socket; then
    "$SYSTEMCTL_EXEC" stop 'dhcpd.socket'
    "$SYSTEMCTL_EXEC" mask 'dhcpd.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'dhcpd.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group DNS Server Group contains 1 group and 2 rules

[ref] Most organizations have an operational need to run at least one nameserver. However, there are many common attacks involving DNS server software, and this server software should be disabled on any system on which it is not needed.

Group Disable DNS Server Group contains 2 rules

[ref] DNS software should be disabled on any systems which does not need to be a nameserver. Note that the BIND DNS server software is not installed on SUSE Linux Enterprise 15 by default. The remainder of this section discusses secure configuration of systems which must be nameservers.

Rule Uninstall bind Package [ref]

The named service is provided by the bind package. The bind package can be removed with the following command:

$ sudo zypper remove bind

Rationale:

If there is no need to make DNS server software available, removing it provides a safeguard against its activation.

Severity:

low

Rule ID: xccdf_org.ssgproject.content_rule_package_bind_removed

Identifiers:

CCE-91285-7

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
disa	CCI-000366
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	2.2.9

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure bind is removed
  package:
    name: bind
    state: absent
  tags:
  - CCE-91285-7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - package_bind_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_bind

class remove_bind {
  package { 'bind':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove bind
#	   from the system, and may remove any packages
#	   that depend on bind. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "bind"

Rule Disable named Service [ref]

The named service can be disabled with the following command:

$ sudo systemctl mask --now named.service

Rationale:

All network services involve some risk of compromise due to implementation flaws and should be disabled if possible.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_service_named_disabled

Identifiers:

CCE-91365-7

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
disa	CCI-000366
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	2.2.9

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
masked = ["named"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Disable named Service - Collect systemd Services Present in the System
  ansible.builtin.command: systemctl -q list-unit-files --type service
  register: service_exists
  changed_when: false
  failed_when: service_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91365-7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_named_disabled

- name: Disable named Service - Ensure named.service is Masked
  ansible.builtin.systemd:
    name: named.service
    state: stopped
    enabled: false
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - service_exists.stdout_lines is search("named.service", multiline=True)
  tags:
  - CCE-91365-7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_named_disabled

- name: Unit Socket Exists - named.socket
  ansible.builtin.command: systemctl -q list-unit-files named.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91365-7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_named_disabled

- name: Disable named Service - Disable Socket named
  ansible.builtin.systemd:
    name: named.socket
    enabled: false
    state: stopped
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - socket_file_exists.stdout_lines is search("named.socket", multiline=True)
  tags:
  - CCE-91365-7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_named_disabled

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include disable_named

class disable_named {
  service {'named':
    enable => false,
    ensure => 'stopped',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'named.service'
"$SYSTEMCTL_EXEC" disable 'named.service'
"$SYSTEMCTL_EXEC" mask 'named.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files named.socket; then
    "$SYSTEMCTL_EXEC" stop 'named.socket'
    "$SYSTEMCTL_EXEC" mask 'named.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'named.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group FTP Server Group contains 1 group and 2 rules

[ref] FTP is a common method for allowing remote access to files. Like telnet, the FTP protocol is unencrypted, which means that passwords and other data transmitted during the session can be captured and that the session is vulnerable to hijacking. Therefore, running the FTP server software is not recommended.

However, there are some FTP server configurations which may be appropriate for some environments, particularly those which allow only read-only anonymous access as a means of downloading data available to the public.

Group Disable vsftpd if Possible Group contains 2 rules

[ref] To minimize attack surface, disable vsftpd if at all possible.

Rule Uninstall vsftpd Package [ref]

The vsftpd package can be removed with the following command:

 $ sudo zypper remove vsftpd

Rationale:

Removing the vsftpd package decreases the risk of its accidental activation.

Severity:

high

Rule ID: xccdf_org.ssgproject.content_rule_package_vsftpd_removed

Identifiers:

CCE-85700-3

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
disa	CCI-000197, CCI-000366, CCI-000381
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a), IA-5(1)(c), IA-5(1).1(v), CM-7, CM-7.1(ii)
nist-csf	PR.IP-1, PR.PT-3
os-srg	SRG-OS-000074-GPOS-00042, SRG-OS-000095-GPOS-00049, SRG-OS-000480-GPOS-00227
stigid	SLES-15-010030
cis	2.2.10
stigref	SV-234804r877396_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure vsftpd is removed
  package:
    name: vsftpd
    state: absent
  tags:
  - CCE-85700-3
  - DISA-STIG-SLES-15-010030
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-CM-7.1(ii)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(1).1(v)
  - disable_strategy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_vsftpd_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_vsftpd

class remove_vsftpd {
  package { 'vsftpd':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove vsftpd
#	   from the system, and may remove any packages
#	   that depend on vsftpd. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "vsftpd"

Rule Disable vsftpd Service [ref]

The vsftpd service can be disabled with the following command:

$ sudo systemctl mask --now vsftpd.service

Rationale:

Running FTP server software provides a network-based avenue of attack, and should be disabled if not needed. Furthermore, the FTP protocol is unencrypted and creates a risk of compromising sensitive information.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_service_vsftpd_disabled

Identifiers:

CCE-91366-5

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
disa	CCI-001436
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	2.2.10

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
masked = ["vsftpd"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Disable vsftpd Service - Collect systemd Services Present in the System
  ansible.builtin.command: systemctl -q list-unit-files --type service
  register: service_exists
  changed_when: false
  failed_when: service_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91366-5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_vsftpd_disabled

- name: Disable vsftpd Service - Ensure vsftpd.service is Masked
  ansible.builtin.systemd:
    name: vsftpd.service
    state: stopped
    enabled: false
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - service_exists.stdout_lines is search("vsftpd.service", multiline=True)
  tags:
  - CCE-91366-5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_vsftpd_disabled

- name: Unit Socket Exists - vsftpd.socket
  ansible.builtin.command: systemctl -q list-unit-files vsftpd.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91366-5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_vsftpd_disabled

- name: Disable vsftpd Service - Disable Socket vsftpd
  ansible.builtin.systemd:
    name: vsftpd.socket
    enabled: false
    state: stopped
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - socket_file_exists.stdout_lines is search("vsftpd.socket", multiline=True)
  tags:
  - CCE-91366-5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_vsftpd_disabled

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include disable_vsftpd

class disable_vsftpd {
  service {'vsftpd':
    enable => false,
    ensure => 'stopped',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'vsftpd.service'
"$SYSTEMCTL_EXEC" disable 'vsftpd.service'
"$SYSTEMCTL_EXEC" mask 'vsftpd.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files vsftpd.socket; then
    "$SYSTEMCTL_EXEC" stop 'vsftpd.socket'
    "$SYSTEMCTL_EXEC" mask 'vsftpd.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'vsftpd.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Web Server Group contains 1 group and 2 rules

[ref] The web server is responsible for providing access to content via the HTTP protocol. Web servers represent a significant security risk because:

The HTTP port is commonly probed by malicious sources
Web server software is very complex, and includes a long history of vulnerabilities
The HTTP protocol is unencrypted and vulnerable to passive monitoring

The system's default web server software is Apache 2 and is provided in the RPM package httpd.

Group Disable Apache if Possible Group contains 2 rules

[ref] If Apache was installed and activated, but the system does not need to act as a web server, then it should be disabled and removed from the system.

Rule Uninstall httpd Package [ref]

The httpd package can be removed with the following command:

$ sudo zypper remove httpd

Rationale:

If there is no need to make the web server software available, removing it provides a safeguard against its activation.

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_package_httpd_removed

Identifiers:

CCE-91286-5

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	2.2.11

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure httpd is removed
  package:
    name: httpd
    state: absent
  tags:
  - CCE-91286-5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_httpd_removed
  - unknown_severity

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_httpd

class remove_httpd {
  package { 'httpd':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove httpd
#	   from the system, and may remove any packages
#	   that depend on httpd. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "httpd"

Rule Disable httpd Service [ref]

The httpd service can be disabled with the following command:

$ sudo systemctl mask --now httpd.service

Rationale:

Running web server software provides a network-based avenue of attack, and should be disabled if not needed.

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_service_httpd_disabled

Identifiers:

CCE-91367-3

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	2.2.11

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
masked = ["httpd"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Disable httpd Service - Collect systemd Services Present in the System
  ansible.builtin.command: systemctl -q list-unit-files --type service
  register: service_exists
  changed_when: false
  failed_when: service_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91367-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_httpd_disabled
  - unknown_severity

- name: Disable httpd Service - Ensure httpd.service is Masked
  ansible.builtin.systemd:
    name: httpd.service
    state: stopped
    enabled: false
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - service_exists.stdout_lines is search("httpd.service", multiline=True)
  tags:
  - CCE-91367-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_httpd_disabled
  - unknown_severity

- name: Unit Socket Exists - httpd.socket
  ansible.builtin.command: systemctl -q list-unit-files httpd.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91367-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_httpd_disabled
  - unknown_severity

- name: Disable httpd Service - Disable Socket httpd
  ansible.builtin.systemd:
    name: httpd.socket
    enabled: false
    state: stopped
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - socket_file_exists.stdout_lines is search("httpd.socket", multiline=True)
  tags:
  - CCE-91367-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_httpd_disabled
  - unknown_severity

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include disable_httpd

class disable_httpd {
  service {'httpd':
    enable => false,
    ensure => 'stopped',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'httpd.service'
"$SYSTEMCTL_EXEC" disable 'httpd.service'
"$SYSTEMCTL_EXEC" mask 'httpd.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files httpd.socket; then
    "$SYSTEMCTL_EXEC" stop 'httpd.socket'
    "$SYSTEMCTL_EXEC" mask 'httpd.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'httpd.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group IMAP and POP3 Server Group contains 1 group and 2 rules

[ref] Dovecot provides IMAP and POP3 services. It is not installed by default. The project page at http://www.dovecot.org contains more detailed information about Dovecot configuration.

Group Disable Dovecot Group contains 2 rules

[ref] If the system does not need to operate as an IMAP or POP3 server, the dovecot software should be disabled and removed.

Rule Uninstall dovecot Package [ref]

The dovecot package can be removed with the following command:

$ sudo zypper remove dovecot

Rationale:

If there is no need to make the Dovecot software available, removing it provides a safeguard against its activation.

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_package_dovecot_removed

Identifiers:

CCE-91369-9

References:

cis	2.2.12

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure dovecot is removed
  package:
    name: dovecot
    state: absent
  tags:
  - CCE-91369-9
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_dovecot_removed
  - unknown_severity

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_dovecot

class remove_dovecot {
  package { 'dovecot':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove dovecot
#	   from the system, and may remove any packages
#	   that depend on dovecot. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "dovecot"

Rule Disable Dovecot Service [ref]

The dovecot service can be disabled with the following command:

$ sudo systemctl mask --now dovecot.service

Rationale:

Running an IMAP or POP3 server provides a network-based avenue of attack, and should be disabled if not needed.

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_service_dovecot_disabled

Identifiers:

CCE-91368-1

References:

cis	2.2.12

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
masked = ["dovecot"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Disable Dovecot Service - Collect systemd Services Present in the System
  ansible.builtin.command: systemctl -q list-unit-files --type service
  register: service_exists
  changed_when: false
  failed_when: service_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91368-1
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_dovecot_disabled
  - unknown_severity

- name: Disable Dovecot Service - Ensure dovecot.service is Masked
  ansible.builtin.systemd:
    name: dovecot.service
    state: stopped
    enabled: false
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - service_exists.stdout_lines is search("dovecot.service", multiline=True)
  tags:
  - CCE-91368-1
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_dovecot_disabled
  - unknown_severity

- name: Unit Socket Exists - dovecot.socket
  ansible.builtin.command: systemctl -q list-unit-files dovecot.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91368-1
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_dovecot_disabled
  - unknown_severity

- name: Disable Dovecot Service - Disable Socket dovecot
  ansible.builtin.systemd:
    name: dovecot.socket
    enabled: false
    state: stopped
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - socket_file_exists.stdout_lines is search("dovecot.socket", multiline=True)
  tags:
  - CCE-91368-1
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_dovecot_disabled
  - unknown_severity

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include disable_dovecot

class disable_dovecot {
  service {'dovecot':
    enable => false,
    ensure => 'stopped',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'dovecot.service'
"$SYSTEMCTL_EXEC" disable 'dovecot.service'
"$SYSTEMCTL_EXEC" mask 'dovecot.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files dovecot.socket; then
    "$SYSTEMCTL_EXEC" stop 'dovecot.socket'
    "$SYSTEMCTL_EXEC" mask 'dovecot.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'dovecot.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group LDAP Group contains 2 groups and 2 rules

[ref] LDAP is a popular directory service, that is, a standardized way of looking up information from a central database. SUSE Linux Enterprise 15 includes software that enables a system to act as both an LDAP client and server.

Group Configure OpenLDAP Clients Group contains 1 rule

[ref] This section provides information on which security settings are important to configure in OpenLDAP clients by manually editing the appropriate configuration files. SUSE Linux Enterprise 15 provides an automated configuration tool called authconfig and a graphical wrapper for authconfig called system-config-authentication. However, these tools do not provide as much control over configuration as manual editing of configuration files. The authconfig tools do not allow you to specify locations of SSL certificate files, which is useful when trying to use SSL cleanly across several protocols. Installation and configuration of OpenLDAP on SUSE Linux Enterprise 15 is available at

Warning: Before configuring any system to be an LDAP client, ensure that a working LDAP server is present on the network.

Rule Ensure LDAP client is not installed [ref]

The Lightweight Directory Access Protocol (LDAP) is a service that provides a method for looking up information from a central database. The openldap2-client package can be removed with the following command:

$ sudo zypper remove openldap2-client

Rationale:

If the system does not need to act as an LDAP client, it is recommended that the software is removed to reduce the potential attack surface.

Severity:

low

Rule ID: xccdf_org.ssgproject.content_rule_package_openldap-clients_removed

Identifiers:

CCE-91310-3

References:

cis	2.3.5

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure openldap2-client is removed
  package:
    name: openldap2-client
    state: absent
  tags:
  - CCE-91310-3
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - package_openldap-clients_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_openldap2-client

class remove_openldap2-client {
  package { 'openldap2-client':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove openldap2-client
#	   from the system, and may remove any packages
#	   that depend on openldap2-client. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "openldap2-client"

Group Configure OpenLDAP Server Group contains 1 rule

[ref] This section details some security-relevant settings for an OpenLDAP server.

Rule Uninstall openldap-servers Package [ref]

The openldap2 package is not installed by default on a SUSE Linux Enterprise 15 system. It is needed only by the OpenLDAP server, not by the clients which use LDAP for authentication. If the system is not intended for use as an LDAP Server it should be removed.

Rationale:

Unnecessary packages should not be installed to decrease the attack surface of the system. While this software is clearly essential on an LDAP server, it is not necessary on typical desktop or workstation systems.

Severity:

low

Rule ID: xccdf_org.ssgproject.content_rule_package_openldap-servers_removed

Identifiers:

CCE-91283-2

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
disa	CCI-000366
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure openldap2 is removed
  package:
    name: openldap2
    state: absent
  tags:
  - CCE-91283-2
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - package_openldap-servers_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_openldap2

class remove_openldap2 {
  package { 'openldap2':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove openldap2
#	   from the system, and may remove any packages
#	   that depend on openldap2. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "openldap2"

Group Mail Server Software Group contains 1 group and 1 rule

[ref] Mail servers are used to send and receive email over the network. Mail is a very common service, and Mail Transfer Agents (MTAs) are obvious targets of network attack. Ensure that systems are not running MTAs unnecessarily, and configure needed MTAs as defensively as possible.

Very few systems at any site should be configured to directly receive email over the network. Users should instead use mail client programs to retrieve email from a central server that supports protocols such as IMAP or POP3. However, it is normal for most systems to be independently capable of sending email, for instance so that cron jobs can report output to an administrator. Most MTAs, including Postfix, support a submission-only mode in which mail can be sent from the local system to a central site MTA (or directly delivered to a local account), but the system still cannot receive mail directly over a network.

The alternatives program in SUSE Linux Enterprise 15 permits selection of other mail server software (such as Sendmail), but Postfix is the default and is preferred. Postfix was coded with security in mind and can also be more effectively contained by SELinux as its modular design has resulted in separate processes performing specific actions. More information is available on its website, http://www.postfix.org.

Group Configure SMTP For Mail Clients Group contains 1 rule

[ref] This section discusses settings for Postfix in a submission-only e-mail configuration.

Rule Disable Postfix Network Listening [ref]

Edit the file /etc/postfix/main.cf to ensure that only the following inet_interfaces line appears:

inet_interfaces = loopback-only

Rationale:

This ensures postfix accepts mail messages (such as cron job reports) from the local system only, and not from the network, which protects it from network attack.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_postfix_network_listening_disabled

Identifiers:

CCE-91280-8

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
disa	CCI-000382
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	2.2.16
anssi	R74
pcidss4	1.4.2

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value var_postfix_inet_interfaces # promote to variable
  set_fact:
    var_postfix_inet_interfaces: !!str loopback-only
  tags:
    - always

- name: Gather list of packages
  package_facts:
    manager: auto
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ''
  tags:
  - CCE-91280-8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-1.4.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - postfix_network_listening_disabled
  - restrict_strategy

- name: Make changes to Postfix configuration file
  lineinfile:
    path: /etc/postfix/main.cf
    create: false
    regexp: ^inet_interfaces\s*=\s.*
    line: inet_interfaces = {{ var_postfix_inet_interfaces }}
    state: present
    insertafter: ^inet_interfaces\s*=\s.*
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"postfix" in ansible_facts.packages'
  - '"postfix" in ansible_facts.packages'
  tags:
  - CCE-91280-8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-1.4.2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - postfix_network_listening_disabled
  - restrict_strategy

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q postfix; }; then

var_postfix_inet_interfaces='loopback-only'


if [ -e "/etc/postfix/main.cf" ] ; then
    
    LC_ALL=C sed -i "/^\s*inet_interfaces\s\+=\s\+/Id" "/etc/postfix/main.cf"
else
    touch "/etc/postfix/main.cf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/postfix/main.cf"

cp "/etc/postfix/main.cf" "/etc/postfix/main.cf.bak"
# Insert at the end of the file
printf '%s\n' "inet_interfaces=$var_postfix_inet_interfaces" >> "/etc/postfix/main.cf"
# Clean up after ourselves.
rm "/etc/postfix/main.cf.bak"

systemctl restart postfix

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group NFS and RPC Group contains 4 groups and 4 rules

[ref] The Network File System is a popular distributed filesystem for the Unix environment, and is very widely deployed. This section discusses the circumstances under which it is possible to disable NFS and its dependencies, and then details steps which should be taken to secure NFS's configuration. This section is relevant to systems operating as NFS clients, as well as to those operating as NFS servers.

Group Disable All NFS Services if Possible Group contains 1 group and 2 rules

[ref] If there is not a reason for the system to operate as either an NFS client or an NFS server, follow all instructions in this section to disable subsystems required by NFS.

Warning: The steps in this section will prevent a system from operating as either an NFS client or an NFS server. Only perform these steps on systems which do not need NFS at all.

Group Disable Services Used Only by NFS Group contains 2 rules

[ref] If NFS is not needed, disable the NFS client daemons nfslock, rpcgssd, and rpcidmapd.

All of these daemons run with elevated privileges, and many listen for network connections. If they are not needed, they should be disabled to improve system security posture.

Rule Uninstall rpcbind Package [ref]

The rpcbind utility maps RPC services to the ports on which they listen. RPC processes notify rpcbind when they start, registering the ports they are listening on and the RPC program numbers they expect to serve. The rpcbind service redirects the client to the proper port number so it can communicate with the requested service. If the system does not require RPC (such as for NFS servers) then this service should be disabled. The rpcbind package can be removed with the following command:

$ sudo zypper remove rpcbind

Rationale:

If the system does not require rpc based services, it is recommended that rpcbind be disabled to reduce the attack surface.

Severity:

low

Rule ID: xccdf_org.ssgproject.content_rule_package_rpcbind_removed

Identifiers:

CCE-92467-0

References:

cis	2.2.8

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure rpcbind is removed
  package:
    name: rpcbind
    state: absent
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92467-0
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - package_rpcbind_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_rpcbind

class remove_rpcbind {
  package { 'rpcbind':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# CAUTION: This remediation script will remove rpcbind
#	   from the system, and may remove any packages
#	   that depend on rpcbind. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "rpcbind"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable rpcbind Service [ref]

$ sudo systemctl mask --now rpcbind.service

Rationale:

If the system does not require rpc based services, it is recommended that rpcbind be disabled to reduce the attack surface.

Severity:

low

Rule ID: xccdf_org.ssgproject.content_rule_service_rpcbind_disabled

Identifiers:

CCE-91312-9

References:

cis	2.2.8
pcidss4	2.2.4

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
masked = ["rpcbind"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Disable rpcbind Service - Collect systemd Services Present in the System
  ansible.builtin.command: systemctl -q list-unit-files --type service
  register: service_exists
  changed_when: false
  failed_when: service_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91312-9
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - service_rpcbind_disabled

- name: Disable rpcbind Service - Ensure rpcbind.service is Masked
  ansible.builtin.systemd:
    name: rpcbind.service
    state: stopped
    enabled: false
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - service_exists.stdout_lines is search("rpcbind.service", multiline=True)
  tags:
  - CCE-91312-9
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - service_rpcbind_disabled

- name: Unit Socket Exists - rpcbind.socket
  ansible.builtin.command: systemctl -q list-unit-files rpcbind.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91312-9
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - service_rpcbind_disabled

- name: Disable rpcbind Service - Disable Socket rpcbind
  ansible.builtin.systemd:
    name: rpcbind.socket
    enabled: false
    state: stopped
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - socket_file_exists.stdout_lines is search("rpcbind.socket", multiline=True)
  tags:
  - CCE-91312-9
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - service_rpcbind_disabled

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include disable_rpcbind

class disable_rpcbind {
  service {'rpcbind':
    enable => false,
    ensure => 'stopped',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'rpcbind.service'
"$SYSTEMCTL_EXEC" disable 'rpcbind.service'
"$SYSTEMCTL_EXEC" mask 'rpcbind.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files rpcbind.socket; then
    "$SYSTEMCTL_EXEC" stop 'rpcbind.socket'
    "$SYSTEMCTL_EXEC" mask 'rpcbind.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'rpcbind.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Configure NFS Clients Group contains 1 group and 1 rule

[ref] The steps in this section are appropriate for systems which operate as NFS clients.

Group Disable NFS Server Daemons Group contains 1 rule

[ref] There is no need to run the NFS server daemons nfs and rpcsvcgssd except on a small number of properly secured systems designated as NFS servers. Ensure that these daemons are turned off on clients.

Rule Disable Network File System (nfs) [ref]

The Network File System (NFS) service allows remote hosts to mount and interact with shared filesystems on the local system. If the local system is not designated as a NFS server then this service should be disabled. The nfs-server service can be disabled with the following command:

$ sudo systemctl mask --now nfs-server.service

Rationale:

Unnecessary services should be disabled to decrease the attack surface of the system.

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_service_nfs_disabled

Identifiers:

CCE-91364-0

References:

cis-csc	11, 12, 14, 15, 16, 18, 3, 5
cobit5	DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7
iso27001-2013	A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.AC-4, PR.AC-6, PR.PT-3
cis	2.2.7

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
masked = ["nfs-server"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Disable Network File System (nfs) - Collect systemd Services Present in the
    System
  ansible.builtin.command: systemctl -q list-unit-files --type service
  register: service_exists
  changed_when: false
  failed_when: service_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91364-0
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_nfs_disabled
  - unknown_severity

- name: Disable Network File System (nfs) - Ensure nfs-server.service is Masked
  ansible.builtin.systemd:
    name: nfs-server.service
    state: stopped
    enabled: false
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - service_exists.stdout_lines is search("nfs-server.service", multiline=True)
  tags:
  - CCE-91364-0
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_nfs_disabled
  - unknown_severity

- name: Unit Socket Exists - nfs-server.socket
  ansible.builtin.command: systemctl -q list-unit-files nfs-server.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91364-0
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_nfs_disabled
  - unknown_severity

- name: Disable Network File System (nfs) - Disable Socket nfs-server
  ansible.builtin.systemd:
    name: nfs-server.socket
    enabled: false
    state: stopped
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - socket_file_exists.stdout_lines is search("nfs-server.socket", multiline=True)
  tags:
  - CCE-91364-0
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_nfs_disabled
  - unknown_severity

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include disable_nfs-server

class disable_nfs-server {
  service {'nfs-server':
    enable => false,
    ensure => 'stopped',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'nfs-server.service'
"$SYSTEMCTL_EXEC" disable 'nfs-server.service'
"$SYSTEMCTL_EXEC" mask 'nfs-server.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files nfs-server.socket; then
    "$SYSTEMCTL_EXEC" stop 'nfs-server.socket'
    "$SYSTEMCTL_EXEC" mask 'nfs-server.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'nfs-server.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Uninstall nfs-utils Package [ref]

The nfs-utils package can be removed with the following command:

$ sudo zypper remove nfs-utils

Rationale:

nfs-utils provides a daemon for the kernel NFS server and related tools. This package also contains the showmount program. showmount queries the mount daemon on a remote host for information about the Network File System (NFS) server on the remote host. For example, showmount can display the clients which are mounted on that host.

Severity:

low

Rule ID: xccdf_org.ssgproject.content_rule_package_nfs-utils_removed

Identifiers:

CCE-91284-0

References:

os-srg	SRG-OS-000095-GPOS-00049
cis	2.2.7

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure nfs-utils is removed
  package:
    name: nfs-utils
    state: absent
  tags:
  - CCE-91284-0
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - package_nfs-utils_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_nfs-utils

class remove_nfs-utils {
  package { 'nfs-utils':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove nfs-utils
#	   from the system, and may remove any packages
#	   that depend on nfs-utils. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "nfs-utils"

Group Network Time Protocol Group contains 4 rules

[ref] The Network Time Protocol is used to manage the system clock over a network. Computer clocks are not very accurate, so time will drift unpredictably on unmanaged systems. Central time protocols can be used both to ensure that time is consistent among a network of systems, and that their time is consistent with the outside world.

If every system on a network reliably reports the same time, then it is much easier to correlate log messages in case of an attack. In addition, a number of cryptographic protocols (such as Kerberos) use timestamps to prevent certain types of attacks. If your network does not have synchronized time, these protocols may be unreliable or even unusable.

Depending on the specifics of the network, global time accuracy may be just as important as local synchronization, or not very important at all. If your network is connected to the Internet, using a public timeserver (or one provided by your enterprise) provides globally accurate timestamps which may be essential in investigating or responding to an attack which originated outside of your network.

A typical network setup involves a small number of internal systems operating as NTP servers, and the remainder obtaining time information from those internal servers.

There is a choice between the daemons ntpd and chronyd, which are available from the repositories in the ntp and chrony packages respectively.

The default chronyd daemon can work well when external time references are only intermittently accesible, can perform well even when the network is congested for longer periods of time, can usually synchronize the clock faster and with better time accuracy, and quickly adapts to sudden changes in the rate of the clock, for example, due to changes in the temperature of the crystal oscillator. Chronyd should be considered for all systems which are frequently suspended or otherwise intermittently disconnected and reconnected to a network. Mobile and virtual systems for example.

The ntpd NTP daemon fully supports NTP protocol version 4 (RFC 5905), including broadcast, multicast, manycast clients and servers, and the orphan mode. It also supports extra authentication schemes based on public-key cryptography (RFC 5906). The NTP daemon (ntpd) should be considered for systems which are normally kept permanently on. Systems which are required to use broadcast or multicast IP, or to perform authentication of packets with the Autokey protocol, should consider using ntpd.

Refer to https://docs.fedoraproject.org/en-US/fedora/latest/system-administrators-guide/servers/Configuring_NTP_Using_the_chrony_Suite/ for more detailed comparison of features of chronyd and ntpd daemon features respectively, and for further guidance how to choose between the two NTP daemons.

The upstream manual pages at https://chrony-project.org/documentation.html for chronyd and http://www.ntp.org for ntpd provide additional information on the capabilities and configuration of each of the NTP daemons.

Rule The Chrony package is installed [ref]

System time should be synchronized between all systems in an environment. This is typically done by establishing an authoritative time server or set of servers and having all systems synchronize their clocks to them. The chrony package can be installed with the following command:

$ sudo zypper install chrony

Rationale:

Time synchronization is important to support time sensitive security mechanisms like Kerberos and also ensures log files have consistent time records across the enterprise, which aids in forensic investigations.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_chrony_installed

Identifiers:

CCE-91229-5

References:

ism	0988, 1405
ospp	FMT_SMF_EXT.1
pcidss	Req-10.4
os-srg	SRG-OS-000355-GPOS-00143
cis	2.2.1.1
anssi	R71
pcidss4	10.6.1

Remediation OSBuild Blueprint snippet ⇲


[[packages]]
name = "chrony"
version = "*"

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

- name: Ensure chrony is installed
  package:
    name: chrony
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91229-5
  - PCI-DSS-Req-10.4
  - PCI-DSSv4-10.6.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_chrony_installed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include install_chrony

class install_chrony {
  package { 'chrony':
    ensure => 'installed',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

zypper install -y "chrony"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Chrony Configure Pool and Server [ref]

Chrony is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More information on chrony can be found at https://chrony-project.org/. Chrony can be configured to be a client and/or a server. Add or edit server or pool lines to /etc/chrony.conf as appropriate:

server <remote-server>

Multiple servers may be configured.

Rationale:

If chrony is in use on the system proper configuration is vital to ensuring time synchronization is working properly.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_chronyd_configure_pool_and_server

Identifiers:

CCE-92526-3

References:

disa	CCI-000160, CCI-001891
ism	0988, 1405
nist	CM-6(a), AU-8(1)(a)
pcidss	Req-10.4.3
cis	2.2.1.3
anssi	R71

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92526-3
  - NIST-800-53-AU-8(1)(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.4.3
  - chronyd_configure_pool_and_server
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
- name: XCCDF Value var_multiple_time_servers # promote to variable
  set_fact:
    var_multiple_time_servers: !!str 0.suse.pool.ntp.org,1.suse.pool.ntp.org,2.suse.pool.ntp.org,3.suse.pool.ntp.org
  tags:
    - always
- name: XCCDF Value var_multiple_time_pools # promote to variable
  set_fact:
    var_multiple_time_pools: !!str 0.suse.pool.ntp.org,1.suse.pool.ntp.org,2.suse.pool.ntp.org,3.suse.pool.ntp.org
  tags:
    - always

- name: Chrony Configure Pool and Server - Add missing / update wrong records for
    remote time servers
  ansible.builtin.lineinfile:
    path: /etc/chrony.conf
    regexp: ^\s*\bserver\b\s*\b{{ item }}\b$
    state: present
    line: server {{ item }}
    create: true
  with_items:
  - '{{ var_multiple_time_servers.split(",") }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"chrony" in ansible_facts.packages'
  tags:
  - CCE-92526-3
  - NIST-800-53-AU-8(1)(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.4.3
  - chronyd_configure_pool_and_server
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Chrony Configure Pool and Server - Add missing / update wrong records for
    remote time pools
  ansible.builtin.lineinfile:
    path: /etc/chrony.conf
    regexp: ^\s*\bpool\b\s*\b{{ item }}\b$
    state: present
    line: pool {{ item }}
    create: true
  with_items:
  - '{{ var_multiple_time_pools.split(",") }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"chrony" in ansible_facts.packages'
  tags:
  - CCE-92526-3
  - NIST-800-53-AU-8(1)(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.4.3
  - chronyd_configure_pool_and_server
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q chrony; }; then

var_multiple_time_servers='0.suse.pool.ntp.org,1.suse.pool.ntp.org,2.suse.pool.ntp.org,3.suse.pool.ntp.org'

var_multiple_time_pools='0.suse.pool.ntp.org,1.suse.pool.ntp.org,2.suse.pool.ntp.org,3.suse.pool.ntp.org'


config_file="/etc/chrony.conf"

# Check and configigure servers in /etc/chrony.conf
IFS="," read -a SERVERS <<< $var_multiple_time_servers
for srv in "${SERVERS[@]}"
do
   NTP_SRV=$(grep -w $srv $config_file)
   if [[ ! "$NTP_SRV" == "server "* ]]
   then
     time_server="server $srv"
     echo $time_server >> "$config_file"
   fi
done

# Check and configure pools in /etc/chrony.conf
IFS="," read -a POOLS <<< $var_multiple_time_pools
for srv in "${POOLS[@]}"
do
   NTP_POOL=$(grep -w $srv $config_file)
   if [[ ! "$NTP_POOL" == "pool "* ]]
   then
     time_server="pool $srv"
     echo $time_server >> "$config_file"
   fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure that chronyd is running under chrony user account [ref]

chrony is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More information on chrony can be found at https://chrony-project.org/. Chrony can be configured to be a client and/or a server. To ensure that chronyd is running under chrony user account, add or edit the OPTIONS variable in /etc/sysconfig/chronyd to include -u chrony:

OPTIONS="-u chrony"

This recommendation only applies if chrony is in use on the system.

Rationale:

If chrony is in use on the system proper configuration is vital to ensuring time synchronization is working properly.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_chronyd_run_as_chrony_user

Identifiers:

CCE-91360-8

References:

cis	2.2.1.3
pcidss4	10.6.3

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q chrony; }; then

if grep -q 'OPTIONS=.*' /etc/sysconfig/chronyd; then
	# trying to solve cases where the parameter after OPTIONS
	#may or may not be enclosed in quotes
	sed -i -E -e 's/\s*-u\s*\w+\s*/ /' -e 's/^([\s]*OPTIONS=["]?[^"]*)("?)/\1 -u chrony\2/' /etc/sysconfig/chronyd
else
	echo 'OPTIONS="-u chrony"' >> /etc/sysconfig/chronyd
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Configure Systemd Timesyncd Root Distance Servers [ref]

systemd-timesyncd server configuration should have RootDistanceMaxSec is listed in accordance with local policy. This setting describes the maximum estimated time required for a packet to travel to the server connected.

Rationale:

Configuring systemd-timesyncd RootDistanceMaxSec ensures time synchronization is using servers that are close enough to the client.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_service_timesyncd_root_distance_configured

Identifiers:

CCE-92514-9

References:

disa	CCI-001891
pcidss	Req-10.4.3
cis	2.2.1.2

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-92514-9
  - PCI-DSS-Req-10.4.3
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_timesyncd_root_distance_configured

- name: Configure Systemd Timesyncd Root Distance Servers - Add missing / update wrong
    records for root distance
  ansible.builtin.lineinfile:
    path: /etc/systemd/timesyncd.d/oscap-remedy.conf
    regexp: ^\s*RootDistanceMax\s*=
    state: present
    line: RootDistanceMax=1
    create: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"systemd" in ansible_facts.packages'
  tags:
  - CCE-92514-9
  - PCI-DSS-Req-10.4.3
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_timesyncd_root_distance_configured

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q systemd; }; then

config_file="/etc/systemd/timesyncd.d/oscap-remedy.conf"
IFS=" " mapfile -t current_cfg_arr < <(ls -1 /etc/systemd/timesyncd.d/* 2>/dev/null)
current_cfg_arr+=( "/etc/systemd/timesyncd.conf" )
# Comment existing NTP RootDistanceMax settings
if [ ${#current_cfg_arr[@]} -ne 0 ]; then
    for current_cfg in "${current_cfg_arr[@]}"
    do
        sed -i 's/^RootDistanceMax/#&/g' "$current_cfg"
    done
fi
# Set RootDistance in drop-in configuration
echo "RootDistanceMax=1" >> "$config_file"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Obsolete Services Group contains 5 groups and 11 rules

[ref] This section discusses a number of network-visible services which have historically caused problems for system security, and for which disabling or severely limiting the service has been the best available guidance for some time. As a result of this, many of these services are not installed as part of SUSE Linux Enterprise 15 by default.

Organizations which are running these services should switch to more secure equivalents as soon as possible. If it remains absolutely necessary to run one of these services for legacy reasons, care should be taken to restrict the service as much as possible, for instance by configuring host firewall software such as iptables to restrict access to the vulnerable service to only those remote hosts which have a known need to use it.

Group Xinetd Group contains 3 rules

[ref] The xinetd service acts as a dedicated listener for some network services (mostly, obsolete ones) and can be used to provide access controls and perform some logging. It has been largely obsoleted by other features, and it is not installed by default. The older Inetd service is not even available as part of SUSE Linux Enterprise 15.

Rule Uninstall tcpd Package [ref]

The tcpd package can be removed with the following command:

$ sudo zypper remove tcpd

Rationale:

Administrators can use TCP wrapper library and daemon for host control over network services. In these implementations, xinetd runs tcpd program, which first looks at the incomming connection as well as the access control lists in the /etc/hosts.allow and /etc/hosts.deny files. Removing the xinetd package decreases the risk of the xinetd service's accidental (or intentional) activation. The removal of tcpd package will support this protective measure in addition.

Severity:

low

Rule ID: xccdf_org.ssgproject.content_rule_package_tcp_wrappers_removed

Identifiers:

CCE-92476-1

References:

cis-csc	11, 12, 14, 15, 3, 8, 9
cobit5	APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06
disa	CCI-000305
hipaa	164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
iso27001-2013	A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4
cis	2.1.1

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure tcpd is removed
  package:
    name: tcpd
    state: absent
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92476-1
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - package_tcp_wrappers_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_tcpd

class remove_tcpd {
  package { 'tcpd':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# CAUTION: This remediation script will remove tcpd
#	   from the system, and may remove any packages
#	   that depend on tcpd. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "tcpd"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Uninstall xinetd Package [ref]

The xinetd package can be removed with the following command:

$ sudo zypper remove xinetd

Rationale:

Removing the xinetd package decreases the risk of the xinetd service's accidental (or intentional) activation.

Severity:

low

Rule ID: xccdf_org.ssgproject.content_rule_package_xinetd_removed

Identifiers:

CCE-91436-6

References:

cis-csc	11, 12, 14, 15, 3, 8, 9
cobit5	APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06
disa	CCI-000305
hipaa	164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
iso27001-2013	A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4
cis	2.1.1
anssi	R62
pcidss4	2.2.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure xinetd is removed
  package:
    name: xinetd
    state: absent
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91436-6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - package_xinetd_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_xinetd

class remove_xinetd {
  package { 'xinetd':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# CAUTION: This remediation script will remove xinetd
#	   from the system, and may remove any packages
#	   that depend on xinetd. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "xinetd"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable xinetd Service [ref]

The xinetd service can be disabled with the following command:

$ sudo systemctl mask --now xinetd.service

Rationale:

The xinetd service provides a dedicated listener service for some programs, which is no longer necessary for commonly-used network services. Disabling it ensures that these uncommon services are not running, and also prevents attacks against xinetd itself.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_service_xinetd_disabled

Identifiers:

CCE-91438-2

References:

cis-csc	11, 12, 14, 15, 3, 8, 9
cobit5	APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06
cui	3.4.7
disa	CCI-000305
hipaa	164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
iso27001-2013	A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4
cis	2.1.1

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
masked = ["xinetd"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Disable xinetd Service - Collect systemd Services Present in the System
  ansible.builtin.command: systemctl -q list-unit-files --type service
  register: service_exists
  changed_when: false
  failed_when: service_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91438-2
  - NIST-800-171-3.4.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_xinetd_disabled

- name: Disable xinetd Service - Ensure xinetd.service is Masked
  ansible.builtin.systemd:
    name: xinetd.service
    state: stopped
    enabled: false
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - service_exists.stdout_lines is search("xinetd.service", multiline=True)
  tags:
  - CCE-91438-2
  - NIST-800-171-3.4.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_xinetd_disabled

- name: Unit Socket Exists - xinetd.socket
  ansible.builtin.command: systemctl -q list-unit-files xinetd.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91438-2
  - NIST-800-171-3.4.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_xinetd_disabled

- name: Disable xinetd Service - Disable Socket xinetd
  ansible.builtin.systemd:
    name: xinetd.socket
    enabled: false
    state: stopped
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - socket_file_exists.stdout_lines is search("xinetd.socket", multiline=True)
  tags:
  - CCE-91438-2
  - NIST-800-171-3.4.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_xinetd_disabled

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include disable_xinetd

class disable_xinetd {
  service {'xinetd':
    enable => false,
    ensure => 'stopped',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'xinetd.service'
"$SYSTEMCTL_EXEC" disable 'xinetd.service'
"$SYSTEMCTL_EXEC" mask 'xinetd.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files xinetd.socket; then
    "$SYSTEMCTL_EXEC" stop 'xinetd.socket'
    "$SYSTEMCTL_EXEC" mask 'xinetd.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'xinetd.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group NIS Group contains 2 rules

[ref] The Network Information Service (NIS), also known as 'Yellow Pages' (YP), and its successor NIS+ have been made obsolete by Kerberos, LDAP, and other modern centralized authentication services. NIS should not be used because it suffers from security problems inherent in its design, such as inadequate protection of important authentication information.

Rule Remove NIS Client [ref]

The Network Information Service (NIS), formerly known as Yellow Pages, is a client-server directory service protocol used to distribute system configuration files. The NIS client (ypbind) was used to bind a system to an NIS server and receive the distributed configuration files.

Rationale:

The NIS service is inherently an insecure system that has been vulnerable to DOS attacks, buffer overflows and has poor authentication for querying NIS maps. NIS generally has been replaced by such protocols as Lightweight Directory Access Protocol (LDAP). It is recommended that the service be removed.

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_package_ypbind_removed

Identifiers:

CCE-91159-4

References:

hipaa	164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)
cis	2.3.1
anssi	R62
pcidss4	2.2.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure ypbind is removed
  package:
    name: ypbind
    state: absent
  tags:
  - CCE-91159-4
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_ypbind_removed
  - unknown_severity

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_ypbind

class remove_ypbind {
  package { 'ypbind':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove ypbind
#	   from the system, and may remove any packages
#	   that depend on ypbind. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "ypbind"

Rule Uninstall ypserv Package [ref]

The ypserv package can be removed with the following command:

$ sudo zypper remove ypserv

Rationale:

The NIS service provides an unencrypted authentication service which does not provide for the confidentiality and integrity of user passwords or the remote session. Removing the ypserv package decreases the risk of the accidental (or intentional) activation of NIS or NIS+ services.

Severity:

high

Rule ID: xccdf_org.ssgproject.content_rule_package_ypserv_removed

Identifiers:

CCE-91160-2

References:

cis-csc	11, 12, 14, 15, 3, 8, 9
cobit5	APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06
disa	CCI-000381
hipaa	164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
iso27001-2013	A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a), IA-5(1)(c)
nist-csf	PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4
pcidss	Req-2.2.2
os-srg	SRG-OS-000095-GPOS-00049
cis	2.2.18
anssi	R62
pcidss4	2.2.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure ypserv is removed
  package:
    name: ypserv
    state: absent
  tags:
  - CCE-91160-2
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-IA-5(1)(c)
  - PCI-DSS-Req-2.2.2
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_ypserv_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_ypserv

class remove_ypserv {
  package { 'ypserv':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove ypserv
#	   from the system, and may remove any packages
#	   that depend on ypserv. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "ypserv"

Group Rlogin, Rsh, and Rexec Group contains 1 rule

[ref] The Berkeley r-commands are legacy services which allow cleartext remote access and have an insecure trust model.

Rule Uninstall rsh Package [ref]

The rsh package contains the client commands for the rsh services

Rationale:

These legacy clients contain numerous security exposures and have been replaced with the more secure SSH package. Even if the server is removed, it is best to ensure the clients are also removed to prevent users from inadvertently attempting to use these commands and therefore exposing their credentials. Note that removing the rsh package removes the clients for rsh,rcp, and rlogin.

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_package_rsh_removed

Identifiers:

CCE-85760-7

References:

cui	3.1.13
hipaa	164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)
iso27001-2013	A.8.2.3, A.13.1.1, A.13.2.1, A.13.2.3, A.14.1.2, A.14.1.3
cis	2.3.2
anssi	R62
pcidss4	2.2.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure rsh is removed
  package:
    name: rsh
    state: absent
  tags:
  - CCE-85760-7
  - NIST-800-171-3.1.13
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_rsh_removed
  - unknown_severity

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_rsh

class remove_rsh {
  package { 'rsh':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove rsh
#	   from the system, and may remove any packages
#	   that depend on rsh. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "rsh"

Group Chat/Messaging Services Group contains 1 rule

[ref] The talk software makes it possible for users to send and receive messages across systems through a terminal session.

Rule Uninstall talk Package [ref]

The talk package contains the client program for the Internet talk protocol, which allows the user to chat with other users on different systems. Talk is a communication program which copies lines from one terminal to the terminal of another user. The talk package can be removed with the following command:

$ sudo zypper remove talk

Rationale:

The talk software presents a security risk as it uses unencrypted protocols for communications. Removing the talk package decreases the risk of the accidental (or intentional) activation of talk client program.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_talk_removed

Identifiers:

CCE-91432-5

References:

hipaa	164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)
cis	2.3.3
anssi	R62
pcidss4	2.2.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure talk is removed
  package:
    name: talk
    state: absent
  tags:
  - CCE-91432-5
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_talk_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_talk

class remove_talk {
  package { 'talk':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove talk
#	   from the system, and may remove any packages
#	   that depend on talk. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "talk"

Group Telnet Group contains 2 rules

[ref] The telnet protocol does not provide confidentiality or integrity for information transmitted on the network. This includes authentication information such as passwords. Organizations which use telnet should be actively working to migrate to a more secure protocol.

Rule Uninstall telnet-server Package [ref]

The telnet-server package can be removed with the following command:

$ sudo zypper remove telnet-server

Rationale:

It is detrimental for operating systems to provide, or install by default, functionality exceeding requirements or mission objectives. These unnecessary capabilities are often overlooked and therefore may remain unsecure. They increase the risk to the platform by providing additional attack vectors.
The telnet service provides an unencrypted remote access service which does not provide for the confidentiality and integrity of user passwords or the remote session. If a privileged user were to login using this service, the privileged user password could be compromised.
Removing the telnet-server package decreases the risk of the telnet service's accidental (or intentional) activation.

Severity:

high

Rule ID: xccdf_org.ssgproject.content_rule_package_telnet-server_removed

Identifiers:

CCE-83273-3

References:

cis-csc	11, 12, 14, 15, 3, 8, 9
cobit5	APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06
disa	CCI-000381
hipaa	164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
iso27001-2013	A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4
pcidss	Req-2.2.2
os-srg	SRG-OS-000095-GPOS-00049
stigid	SLES-15-010180
cis	2.2.19
anssi	R62
pcidss4	2.2.4
stigref	SV-234818r877396_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure telnet-server is removed
  package:
    name: telnet-server
    state: absent
  tags:
  - CCE-83273-3
  - DISA-STIG-SLES-15-010180
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-2.2.2
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_telnet-server_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_telnet-server

class remove_telnet-server {
  package { 'telnet-server':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove telnet-server
#	   from the system, and may remove any packages
#	   that depend on telnet-server. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "telnet-server"

Rule Remove telnet Clients [ref]

The telnet client allows users to start connections to other systems via the telnet protocol.

Rationale:

The telnet protocol is insecure and unencrypted. The use of an unencrypted transmission medium could allow an unauthorized user to steal credentials. The ssh package provides an encrypted session and stronger security and is included in SUSE Linux Enterprise 15.

Severity:

low

Rule ID: xccdf_org.ssgproject.content_rule_package_telnet_removed

Identifiers:

CCE-91434-1

References:

cui	3.1.13
hipaa	164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)
iso27001-2013	A.8.2.3, A.13.1.1, A.13.2.1, A.13.2.3, A.14.1.2, A.14.1.3
cis	2.3.4
anssi	R62
pcidss4	2.2.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure telnet is removed
  package:
    name: telnet
    state: absent
  tags:
  - CCE-91434-1
  - NIST-800-171-3.1.13
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - package_telnet_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_telnet

class remove_telnet {
  package { 'telnet':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove telnet
#	   from the system, and may remove any packages
#	   that depend on telnet. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "telnet"

Rule Uninstall rsync Package [ref]

The rsyncd service can be used to synchronize files between systems over network links. The rsync package can be removed with the following command:

$ sudo zypper remove rsync

Rationale:

The rsyncd service presents a security risk as it uses unencrypted protocols for communication.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_rsync_removed

Identifiers:

CCE-92468-8

References:

cis	2.2.17

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure rsync is removed
  package:
    name: rsync
    state: absent
  tags:
  - CCE-92468-8
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_rsync_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_rsync

class remove_rsync {
  package { 'rsync':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove rsync
#	   from the system, and may remove any packages
#	   that depend on rsync. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "rsync"

Rule Ensure rsyncd service is disabled [ref]

The rsyncd service can be disabled with the following command:

$ sudo systemctl mask --now rsyncd.service

Rationale:

The rsyncd service presents a security risk as it uses unencrypted protocols for communication.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_service_rsyncd_disabled

Identifiers:

CCE-91305-3

References:

cis	2.2.17
pcidss4	2.2.4

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
masked = ["rsyncd"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure rsyncd service is disabled - Collect systemd Services Present in the
    System
  ansible.builtin.command: systemctl -q list-unit-files --type service
  register: service_exists
  changed_when: false
  failed_when: service_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91305-3
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_rsyncd_disabled

- name: Ensure rsyncd service is disabled - Ensure rsyncd.service is Masked
  ansible.builtin.systemd:
    name: rsyncd.service
    state: stopped
    enabled: false
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - service_exists.stdout_lines is search("rsyncd.service", multiline=True)
  tags:
  - CCE-91305-3
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_rsyncd_disabled

- name: Unit Socket Exists - rsyncd.socket
  ansible.builtin.command: systemctl -q list-unit-files rsyncd.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91305-3
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_rsyncd_disabled

- name: Ensure rsyncd service is disabled - Disable Socket rsyncd
  ansible.builtin.systemd:
    name: rsyncd.socket
    enabled: false
    state: stopped
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - socket_file_exists.stdout_lines is search("rsyncd.socket", multiline=True)
  tags:
  - CCE-91305-3
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_rsyncd_disabled

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include disable_rsyncd

class disable_rsyncd {
  service {'rsyncd':
    enable => false,
    ensure => 'stopped',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'rsyncd.service'
"$SYSTEMCTL_EXEC" disable 'rsyncd.service'
"$SYSTEMCTL_EXEC" mask 'rsyncd.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files rsyncd.socket; then
    "$SYSTEMCTL_EXEC" stop 'rsyncd.socket'
    "$SYSTEMCTL_EXEC" mask 'rsyncd.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'rsyncd.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Print Support Group contains 2 rules

[ref] The Common Unix Printing System (CUPS) service provides both local and network printing support. A system running the CUPS service can accept print jobs from other systems, process them, and send them to the appropriate printer. It also provides an interface for remote administration through a web browser. The CUPS service is installed and activated by default. The project homepage and more detailed documentation are available at http://www.cups.org.

Rule Uninstall CUPS Package [ref]

The cups package can be removed with the following command:

$ sudo zypper remove cups

Rationale:

If the system does not need to print jobs or accept print jobs from other systems, it is recommended that CUPS be removed to reduce the potential attack surface.

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_package_cups_removed

Identifiers:

CCE-92466-2

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	2.2.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure cups is removed
  package:
    name: cups
    state: absent
  tags:
  - CCE-92466-2
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_cups_removed
  - unknown_severity

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_cups

class remove_cups {
  package { 'cups':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove cups
#	   from the system, and may remove any packages
#	   that depend on cups. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "cups"

Rule Disable the CUPS Service [ref]

The cups service can be disabled with the following command:

$ sudo systemctl mask --now cups.service

Rationale:

Turn off unneeded services to reduce attack surface.

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_service_cups_disabled

Identifiers:

CCE-91322-8

References:

cis-csc	11, 14, 3, 9
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06
isa-62443-2009	4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.IP-1, PR.PT-3
cis	2.2.4

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
masked = ["cups"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Disable the CUPS Service - Collect systemd Services Present in the System
  ansible.builtin.command: systemctl -q list-unit-files --type service
  register: service_exists
  changed_when: false
  failed_when: service_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91322-8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_cups_disabled
  - unknown_severity

- name: Disable the CUPS Service - Ensure cups.service is Masked
  ansible.builtin.systemd:
    name: cups.service
    state: stopped
    enabled: false
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - service_exists.stdout_lines is search("cups.service", multiline=True)
  tags:
  - CCE-91322-8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_cups_disabled
  - unknown_severity

- name: Unit Socket Exists - cups.socket
  ansible.builtin.command: systemctl -q list-unit-files cups.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91322-8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_cups_disabled
  - unknown_severity

- name: Disable the CUPS Service - Disable Socket cups
  ansible.builtin.systemd:
    name: cups.socket
    enabled: false
    state: stopped
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - socket_file_exists.stdout_lines is search("cups.socket", multiline=True)
  tags:
  - CCE-91322-8
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_cups_disabled
  - unknown_severity

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include disable_cups

class disable_cups {
  service {'cups':
    enable => false,
    ensure => 'stopped',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'cups.service'
"$SYSTEMCTL_EXEC" disable 'cups.service'
"$SYSTEMCTL_EXEC" mask 'cups.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files cups.socket; then
    "$SYSTEMCTL_EXEC" stop 'cups.socket'
    "$SYSTEMCTL_EXEC" mask 'cups.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'cups.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Proxy Server Group contains 1 group and 2 rules

[ref] A proxy server is a very desirable target for a potential adversary because much (or all) sensitive data for a given infrastructure may flow through it. Therefore, if one is required, the system acting as a proxy server should be dedicated to that purpose alone and be stored in a physically secure location. The system's default proxy server software is Squid, and provided in an RPM package of the same name.

Group Disable Squid if Possible Group contains 2 rules

[ref] If Squid was installed and activated, but the system does not need to act as a proxy server, then it should be disabled and removed.

Rule Uninstall squid Package [ref]

The squid package can be removed with the following command:

 $ sudo zypper remove squid

Rationale:

If there is no need to make the proxy server software available, removing it provides a safeguard against its activation.

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_package_squid_removed

Identifiers:

CCE-91372-3

References:

cis	2.2.14

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure squid is removed
  package:
    name: squid
    state: absent
  tags:
  - CCE-91372-3
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_squid_removed
  - unknown_severity

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_squid

class remove_squid {
  package { 'squid':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove squid
#	   from the system, and may remove any packages
#	   that depend on squid. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "squid"

Rule Disable Squid [ref]

The squid service can be disabled with the following command:

$ sudo systemctl mask --now squid.service

Rationale:

Running proxy server software provides a network-based avenue of attack, and should be removed if not needed.

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_service_squid_disabled

Identifiers:

CCE-91371-5

References:

cis	2.2.14

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
masked = ["squid"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91371-5
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_squid_disabled
  - unknown_severity

- name: Disable Squid - Collect systemd Services Present in the System
  ansible.builtin.command: systemctl -q list-unit-files --type service
  register: service_exists
  changed_when: false
  failed_when: service_exists.rc not in [0, 1]
  check_mode: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "squid" in ansible_facts.packages )
  tags:
  - CCE-91371-5
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_squid_disabled
  - unknown_severity

- name: Disable Squid - Ensure squid.service is Masked
  ansible.builtin.systemd:
    name: squid.service
    state: stopped
    enabled: false
    masked: true
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "squid" in ansible_facts.packages )
  - service_exists.stdout_lines is search("squid.service", multiline=True)
  tags:
  - CCE-91371-5
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_squid_disabled
  - unknown_severity

- name: Unit Socket Exists - squid.socket
  ansible.builtin.command: systemctl -q list-unit-files squid.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "squid" in ansible_facts.packages )
  tags:
  - CCE-91371-5
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_squid_disabled
  - unknown_severity

- name: Disable Squid - Disable Socket squid
  ansible.builtin.systemd:
    name: squid.socket
    enabled: false
    state: stopped
    masked: true
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "squid" in ansible_facts.packages )
  - socket_file_exists.stdout_lines is search("squid.socket", multiline=True)
  tags:
  - CCE-91371-5
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_squid_disabled
  - unknown_severity

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include disable_squid

class disable_squid {
  service {'squid':
    enable => false,
    ensure => 'stopped',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q squid ); then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'squid.service'
"$SYSTEMCTL_EXEC" disable 'squid.service'
"$SYSTEMCTL_EXEC" mask 'squid.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files squid.socket; then
    "$SYSTEMCTL_EXEC" stop 'squid.socket'
    "$SYSTEMCTL_EXEC" mask 'squid.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'squid.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group Samba(SMB) Microsoft Windows File Sharing Server Group contains 1 group and 2 rules

[ref] When properly configured, the Samba service allows Linux systems to provide file and print sharing to Microsoft Windows systems. There are two software packages that provide Samba support. The first, samba-client, provides a series of command line tools that enable a client system to access Samba shares. The second, simply labeled samba, provides the Samba service. It is this second package that allows a Linux system to act as an Active Directory server, a domain controller, or as a domain member. Only the samba-client package is installed by default.

Group Disable Samba if Possible Group contains 2 rules

[ref] Even after the Samba server package has been installed, it will remain disabled. Do not enable this service unless it is absolutely necessary to provide Microsoft Windows file and print sharing functionality.

Rule Uninstall Samba Package [ref]

The samba package can be removed with the following command:

 $ sudo zypper remove samba

Rationale:

If there is no need to make the Samba software available, removing it provides a safeguard against its activation.

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_package_samba_removed

Identifiers:

CCE-91287-3

References:

cis	2.2.13

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure samba is removed
  package:
    name: samba
    state: absent
  tags:
  - CCE-91287-3
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_samba_removed
  - unknown_severity

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_samba

class remove_samba {
  package { 'samba':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove samba
#	   from the system, and may remove any packages
#	   that depend on samba. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "samba"

Rule Disable Samba [ref]

The smb service can be disabled with the following command:

$ sudo systemctl mask --now smb.service

Rationale:

Running a Samba server provides a network-based avenue of attack, and should be disabled if not needed.

Severity:

low

Rule ID: xccdf_org.ssgproject.content_rule_service_smb_disabled

Identifiers:

CCE-91370-7

References:

disa	CCI-001436
cis	2.2.13

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
masked = ["smb"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Disable Samba - Collect systemd Services Present in the System
  ansible.builtin.command: systemctl -q list-unit-files --type service
  register: service_exists
  changed_when: false
  failed_when: service_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91370-7
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - service_smb_disabled

- name: Disable Samba - Ensure smb.service is Masked
  ansible.builtin.systemd:
    name: smb.service
    state: stopped
    enabled: false
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - service_exists.stdout_lines is search("smb.service", multiline=True)
  tags:
  - CCE-91370-7
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - service_smb_disabled

- name: Unit Socket Exists - smb.socket
  ansible.builtin.command: systemctl -q list-unit-files smb.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91370-7
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - service_smb_disabled

- name: Disable Samba - Disable Socket smb
  ansible.builtin.systemd:
    name: smb.socket
    enabled: false
    state: stopped
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - socket_file_exists.stdout_lines is search("smb.socket", multiline=True)
  tags:
  - CCE-91370-7
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - service_smb_disabled

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include disable_smb

class disable_smb {
  service {'smb':
    enable => false,
    ensure => 'stopped',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'smb.service'
"$SYSTEMCTL_EXEC" disable 'smb.service'
"$SYSTEMCTL_EXEC" mask 'smb.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files smb.socket; then
    "$SYSTEMCTL_EXEC" stop 'smb.socket'
    "$SYSTEMCTL_EXEC" mask 'smb.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'smb.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group SNMP Server Group contains 1 group and 2 rules

[ref] The Simple Network Management Protocol allows administrators to monitor the state of network devices, including computers. Older versions of SNMP were well-known for weak security, such as plaintext transmission of the community string (used for authentication) and usage of easily-guessable choices for the community string.

Group Disable SNMP Server if Possible Group contains 2 rules

[ref] The system includes an SNMP daemon that allows for its remote monitoring, though it not installed by default. If it was installed and activated but is not needed, the software should be disabled and removed.

Rule Uninstall net-snmp Package [ref]

The net-snmp package provides the snmpd service. The net-snmp package can be removed with the following command:

$ sudo zypper remove net-snmp

Rationale:

If there is no need to run SNMP server software, removing the package provides a safeguard against its activation.

Severity:

unknown

Rule ID: xccdf_org.ssgproject.content_rule_package_net-snmp_removed

Identifiers:

CCE-91288-1

References:

cis	2.2.15
pcidss4	2.2.4

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure net-snmp is removed
  package:
    name: net-snmp
    state: absent
  tags:
  - CCE-91288-1
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_net-snmp_removed
  - unknown_severity

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_net-snmp

class remove_net-snmp {
  package { 'net-snmp':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove net-snmp
#	   from the system, and may remove any packages
#	   that depend on net-snmp. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "net-snmp"

Rule Disable snmpd Service [ref]

The snmpd service can be disabled with the following command:

$ sudo systemctl mask --now snmpd.service

Rationale:

Running SNMP software provides a network-based avenue of attack, and should be disabled if not needed.

Severity:

low

Rule ID: xccdf_org.ssgproject.content_rule_service_snmpd_disabled

Identifiers:

CCE-91373-1

References:

ism	1311
cis	2.2.15

Remediation OSBuild Blueprint snippet ⇲


[customizations.services]
masked = ["snmpd"]

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-91373-1
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - service_snmpd_disabled

- name: Disable snmpd Service - Collect systemd Services Present in the System
  ansible.builtin.command: systemctl -q list-unit-files --type service
  register: service_exists
  changed_when: false
  failed_when: service_exists.rc not in [0, 1]
  check_mode: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "net-snmp" in ansible_facts.packages )
  tags:
  - CCE-91373-1
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - service_snmpd_disabled

- name: Disable snmpd Service - Ensure snmpd.service is Masked
  ansible.builtin.systemd:
    name: snmpd.service
    state: stopped
    enabled: false
    masked: true
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "net-snmp" in ansible_facts.packages )
  - service_exists.stdout_lines is search("snmpd.service", multiline=True)
  tags:
  - CCE-91373-1
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - service_snmpd_disabled

- name: Unit Socket Exists - snmpd.socket
  ansible.builtin.command: systemctl -q list-unit-files snmpd.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "net-snmp" in ansible_facts.packages )
  tags:
  - CCE-91373-1
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - service_snmpd_disabled

- name: Disable snmpd Service - Disable Socket snmpd
  ansible.builtin.systemd:
    name: snmpd.socket
    enabled: false
    state: stopped
    masked: true
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "net-snmp" in ansible_facts.packages )
  - socket_file_exists.stdout_lines is search("snmpd.socket", multiline=True)
  tags:
  - CCE-91373-1
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - service_snmpd_disabled

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	enable

include disable_snmpd

class disable_snmpd {
  service {'snmpd':
    enable => false,
    ensure => 'stopped',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q net-snmp ); then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'snmpd.service'
"$SYSTEMCTL_EXEC" disable 'snmpd.service'
"$SYSTEMCTL_EXEC" mask 'snmpd.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files snmpd.socket; then
    "$SYSTEMCTL_EXEC" stop 'snmpd.socket'
    "$SYSTEMCTL_EXEC" mask 'snmpd.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'snmpd.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group SSH Server Group contains 1 group and 25 rules

[ref] The SSH protocol is recommended for remote login and remote file transfer. SSH provides confidentiality and integrity for data exchanged between two systems, as well as server authentication, through the use of public key cryptography. The implementation included with the system is called OpenSSH, and more detailed documentation is available from its website, https://www.openssh.com. Its server program is called sshd and provided by the RPM package openssh-server.

Group Configure OpenSSH Server if Necessary Group contains 20 rules

[ref] If the system needs to act as an SSH server, then certain changes should be made to the OpenSSH daemon configuration file /etc/ssh/sshd_config. The following recommendations can be applied to this file. See the sshd_config(5) man page for more detailed information.

Rule Set SSH Client Alive Count Max [ref]

The SSH server sends at most ClientAliveCountMax messages during a SSH session and waits for a response from the SSH client. The option ClientAliveInterval configures timeout after each ClientAliveCountMax message. If the SSH server does not receive a response from the client, then the connection is considered unresponsive and terminated. For SSH earlier than v8.2, a ClientAliveCountMax value of 0 causes a timeout precisely when the ClientAliveInterval is set. Starting with v8.2, a value of 0 disables the timeout functionality completely. If the option is set to a number greater than 0, then the session will be disconnected after ClientAliveInterval * ClientAliveCountMax seconds without receiving a keep alive message.

Rationale:

This ensures a user login will be terminated as soon as the ClientAliveInterval is reached.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sshd_set_keepalive

Identifiers:

CCE-91228-7

References:

cis-csc	1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8
cjis	5.5.6
cobit5	APO13.01, BAI03.01, BAI03.02, BAI03.03, DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui	3.1.11
disa	CCI-000879, CCI-001133, CCI-002361
hipaa	164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2
iso27001-2013	A.12.4.1, A.12.4.3, A.14.1.1, A.14.2.1, A.14.2.5, A.18.1.4, A.6.1.2, A.6.1.5, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nerc-cip	CIP-004-6 R2.2.3, CIP-007-3 R5.1, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3
nist	AC-2(5), AC-12, AC-17(a), SC-10, CM-6(a)
nist-csf	DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.IP-2
pcidss	Req-8.1.8
os-srg	SRG-OS-000163-GPOS-00072, SRG-OS-000279-GPOS-00109
stigid	SLES-15-010320
cis	5.2.16
pcidss4	8.2.8
stigref	SV-234830r951636_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value var_sshd_set_keepalive # promote to variable
  set_fact:
    var_sshd_set_keepalive: !!str 0
  tags:
    - always

- name: Set SSH Client Alive Count Max
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*ClientAliveCountMax\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*ClientAliveCountMax\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*ClientAliveCountMax\s+
      line: ClientAliveCountMax {{ var_sshd_set_keepalive }}
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91228-7
  - CJIS-5.5.6
  - DISA-STIG-SLES-15-010320
  - NIST-800-171-3.1.11
  - NIST-800-53-AC-12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-2(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-10
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_set_keepalive

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_sshd_set_keepalive='0'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*ClientAliveCountMax\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "ClientAliveCountMax $var_sshd_set_keepalive" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Set SSH Client Alive Interval [ref]

SSH allows administrators to set a network responsiveness timeout interval. After this interval has passed, the unresponsive client will be automatically logged out.

To set this timeout interval, edit the following line in /etc/ssh/sshd_config as follows:

ClientAliveInterval 300

The timeout interval is given in seconds. For example, have a timeout of 10 minutes, set interval to 600.

If a shorter timeout has already been set for the login shell, that value will preempt any SSH setting made in /etc/ssh/sshd_config. Keep in mind that some processes may stop SSH from correctly detecting that the user is idle.

Warning: SSH disconnecting unresponsive clients will not have desired effect without also configuring ClientAliveCountMax in the SSH service configuration.

Warning: Following conditions may prevent the SSH session to time out:

Remote processes on the remote machine generates output. As the output has to be transferred over the network to the client, the timeout is reset every time such transfer happens.
Any scp or sftp activity by the same user to the host resets the timeout.

Rationale:

Terminating an idle ssh session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been let unattended.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sshd_set_idle_timeout

Identifiers:

CCE-83281-6

References:

cis-csc	1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8
cjis	5.5.6
cobit5	APO13.01, BAI03.01, BAI03.02, BAI03.03, DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10
cui	3.1.11
disa	CCI-000879, CCI-001133, CCI-002361
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2
iso27001-2013	A.12.4.1, A.12.4.3, A.14.1.1, A.14.2.1, A.14.2.5, A.18.1.4, A.6.1.2, A.6.1.5, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nerc-cip	CIP-004-6 R2.2.3, CIP-007-3 R5.1, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3
nist	CM-6(a), AC-17(a), AC-2(5), AC-12, AC-17(a), SC-10, CM-6(a)
nist-csf	DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.IP-2
pcidss	Req-8.1.8
os-srg	SRG-OS-000126-GPOS-00066, SRG-OS-000163-GPOS-00072, SRG-OS-000279-GPOS-00109, SRG-OS-000395-GPOS-00175
stigid	SLES-15-010280
cis	5.2.16
pcidss4	8.2.8
stigref	SV-234827r951634_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value sshd_idle_timeout_value # promote to variable
  set_fact:
    sshd_idle_timeout_value: !!str 300
  tags:
    - always

- name: Set SSH Client Alive Interval
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*ClientAliveInterval\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*ClientAliveInterval\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*ClientAliveInterval\s+
      line: ClientAliveInterval {{ sshd_idle_timeout_value }}
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83281-6
  - CJIS-5.5.6
  - DISA-STIG-SLES-15-010280
  - NIST-800-171-3.1.11
  - NIST-800-53-AC-12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-2(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-10
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_set_idle_timeout

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

sshd_idle_timeout_value='300'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*ClientAliveInterval\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "ClientAliveInterval $sshd_idle_timeout_value" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable Host-Based Authentication [ref]

SSH's cryptographic host-based authentication is more secure than .rhosts authentication. However, it is not recommended that hosts unilaterally trust one another, even within an organization.
The default SSH configuration disables host-based authentication. The appropriate configuration is used if no value is set for HostbasedAuthentication.
To explicitly disable host-based authentication, add or correct the following line in /etc/ssh/sshd_config:

HostbasedAuthentication no

Rationale:

SSH trust relationships mean a compromise on one host can allow an attacker to move trivially to other hosts.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_disable_host_auth

Identifiers:

CCE-91439-0

References:

cis-csc	11, 12, 14, 15, 16, 18, 3, 5, 9
cjis	5.5.6
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06
cui	3.1.12
disa	CCI-000366
hipaa	164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
ism	0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3
nist	AC-3, AC-17(a), CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.AC-4, PR.AC-6, PR.IP-1, PR.PT-3
ospp	FIA_UAU.1
os-srg	SRG-OS-000480-GPOS-00229
cis	5.2.9
pcidss4	8.3.1

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Disable Host-Based Authentication
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*HostbasedAuthentication\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*HostbasedAuthentication\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*HostbasedAuthentication\s+
      line: HostbasedAuthentication no
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91439-0
  - CJIS-5.5.6
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-8.3.1
  - disable_host_auth
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*HostbasedAuthentication\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "HostbasedAuthentication no" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable SSH Access via Empty Passwords [ref]

Disallow SSH login with empty passwords. The default SSH configuration disables logins with empty passwords. The appropriate configuration is used if no value is set for PermitEmptyPasswords.
To explicitly disallow SSH login from accounts with empty passwords, add or correct the following line in /etc/ssh/sshd_config:

PermitEmptyPasswords no

Any accounts with empty passwords should be disabled immediately, and PAM configuration should prevent users from being able to assign themselves empty passwords.

Rationale:

Configuring this setting for the SSH daemon provides additional assurance that remote login via SSH will require a password, even in the event of misconfiguration elsewhere.

Severity:

high

Rule ID: xccdf_org.ssgproject.content_rule_sshd_disable_empty_passwords

Identifiers:

CCE-85667-4

References:

cis-csc	11, 12, 13, 14, 15, 16, 18, 3, 5, 9
cjis	5.5.6
cobit5	APO01.06, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.03, DSS06.06
cui	3.1.1, 3.1.5
disa	CCI-000366, CCI-000766
hipaa	164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 5.2, SR 7.6
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	CM-6(b), CM-6.1(iv)
nist-csf	PR.AC-4, PR.AC-6, PR.DS-5, PR.IP-1, PR.PT-3
ospp	FIA_UAU.1
pcidss	Req-2.2.4
os-srg	SRG-OS-000106-GPOS-00053, SRG-OS-000480-GPOS-00229, SRG-OS-000480-GPOS-00227
stigid	SLES-15-040440
cis	5.2.11
pcidss4	2.2.6
stigref	SV-235032r951648_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Disable SSH Access via Empty Passwords
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*PermitEmptyPasswords\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*PermitEmptyPasswords\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*PermitEmptyPasswords\s+
      line: PermitEmptyPasswords no
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85667-4
  - CJIS-5.5.6
  - DISA-STIG-SLES-15-040440
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_empty_passwords

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*PermitEmptyPasswords\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "PermitEmptyPasswords no" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable SSH Support for .rhosts Files [ref]

SSH can emulate the behavior of the obsolete rsh command in allowing users to enable insecure access to their accounts via .rhosts files.
The default SSH configuration disables support for .rhosts. The appropriate configuration is used if no value is set for IgnoreRhosts.
To explicitly disable support for .rhosts files, add or correct the following line in /etc/ssh/sshd_config:

IgnoreRhosts yes

Rationale:

SSH trust relationships mean a compromise on one host can allow an attacker to move trivially to other hosts.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sshd_disable_rhosts

Identifiers:

CCE-91307-9

References:

cis-csc	11, 12, 14, 15, 16, 18, 3, 5, 9
cjis	5.5.6
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06
cui	3.1.12
disa	CCI-000366
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nist	AC-17(a), CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.AC-4, PR.AC-6, PR.IP-1, PR.PT-3
ospp	FIA_UAU.1
os-srg	SRG-OS-000480-GPOS-00227
cis	5.2.8
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Disable SSH Support for .rhosts Files
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*IgnoreRhosts\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*IgnoreRhosts\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*IgnoreRhosts\s+
      line: IgnoreRhosts yes
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91307-9
  - CJIS-5.5.6
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_rhosts

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*IgnoreRhosts\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "IgnoreRhosts yes" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Disable SSH Root Login [ref]

The root user should never be allowed to login to a system directly over a network. To disable root login via SSH, add or correct the following line in /etc/ssh/sshd_config:

PermitRootLogin no

Rationale:

Even though the communications channel may be encrypted, an additional layer of security is gained by extending the policy of not logging directly on as root. In addition, logging in with a user-specific account provides individual accountability of actions performed on the system and also helps to minimize direct attack attempts on root's password.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sshd_disable_root_login

Identifiers:

CCE-85557-7

References:

cis-csc	1, 11, 12, 13, 14, 15, 16, 18, 3, 5
cjis	5.5.6
cobit5	APO01.06, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.06, DSS06.10
cui	3.1.1, 3.1.5
disa	CCI-000366, CCI-000770
hipaa	164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3
nist	AC-6(2), AC-17(a), IA-2, IA-2(5), CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5, PR.PT-3
ospp	FAU_GEN.1
pcidss	Req-2.2.4
os-srg	SRG-OS-000109-GPOS-00056, SRG-OS-000480-GPOS-00227
app-srg-ctr	SRG-APP-000148-CTR-000335, SRG-APP-000190-CTR-000500
stigid	SLES-15-020040
cis	5.2.10
anssi	R33
pcidss4	2.2.6
stigref	SV-234870r951638_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Disable SSH Root Login
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*PermitRootLogin\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*PermitRootLogin\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*PermitRootLogin\s+
      line: PermitRootLogin no
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85557-7
  - CJIS-5.5.6
  - DISA-STIG-SLES-15-020040
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(2)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-IA-2
  - NIST-800-53-IA-2(5)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_root_login

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*PermitRootLogin\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "PermitRootLogin no" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Do Not Allow SSH Environment Options [ref]

Ensure that users are not able to override environment variables of the SSH daemon.
The default SSH configuration disables environment processing. The appropriate configuration is used if no value is set for PermitUserEnvironment.
To explicitly disable Environment options, add or correct the following /etc/ssh/sshd_config:

PermitUserEnvironment no

Rationale:

SSH environment options potentially allow users to bypass access restriction in some configurations.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sshd_do_not_permit_user_env

Identifiers:

CCE-85666-6

References:

cis-csc	11, 3, 9
cjis	5.5.6
cobit5	BAI10.01, BAI10.02, BAI10.03, BAI10.05
cui	3.1.12
disa	CCI-000366
hipaa	164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)
isa-62443-2009	4.3.4.3.2, 4.3.4.3.3
isa-62443-2013	SR 7.6
iso27001-2013	A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4
nist	CM-6(b), CM-6.1(iv)
nist-csf	PR.IP-1
pcidss	Req-2.2.4
os-srg	SRG-OS-000480-GPOS-00229
stigid	SLES-15-040440
cis	5.2.12
pcidss4	2.2.6
stigref	SV-235032r951648_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Do Not Allow SSH Environment Options
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*PermitUserEnvironment\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*PermitUserEnvironment\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*PermitUserEnvironment\s+
      line: PermitUserEnvironment no
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85666-6
  - CJIS-5.5.6
  - DISA-STIG-SLES-15-040440
  - NIST-800-171-3.1.12
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_do_not_permit_user_env

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*PermitUserEnvironment\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "PermitUserEnvironment no" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Enable PAM [ref]

UsePAM Enables the Pluggable Authentication Module interface. If set to “yes” this will enable PAM authentication using ChallengeResponseAuthentication and PasswordAuthentication in addition to PAM account and session module processing for all authentication types. To enable PAM authentication, add or correct the following line in /etc/ssh/sshd_config:

UsePAM yes

Rationale:

When UsePAM is set to yes, PAM runs through account and session types properly. This is important if you want to restrict access to services based off of IP, time or other factors of the account. Additionally, you can make sure users inherit certain environment variables on login or disallow access to the server.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sshd_enable_pam

Identifiers:

CCE-91333-5

References:

disa	CCI-000877
os-srg	SRG-OS-000125-GPOS-00065
cis	5.2.19
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Enable PAM
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*UsePAM\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*UsePAM\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*UsePAM\s+
      line: UsePAM yes
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91333-5
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_enable_pam

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*UsePAM\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "UsePAM yes" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Enable SSH Warning Banner [ref]

To enable the warning banner and ensure it is consistent across the system, add or correct the following line in /etc/ssh/sshd_config:

Banner /etc/issue

Another section contains information on how to create an appropriate system-wide warning banner.

Rationale:

The warning message reinforces policy awareness during the logon process and facilitates possible legal action against attackers. Alternatively, systems whose ownership should not be obvious should ensure usage of a banner that does not provide easy attribution.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sshd_enable_warning_banner

Identifiers:

CCE-83263-4

References:

cis-csc	1, 12, 15, 16
cjis	5.5.6
cobit5	DSS05.04, DSS05.10, DSS06.10
cui	3.1.9
disa	CCI-000048, CCI-000050, CCI-001384, CCI-001385, CCI-001386, CCI-001387, CCI-001388
hipaa	164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)
isa-62443-2009	4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9
isa-62443-2013	SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9
iso27001-2013	A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3
nist	AC-8(a), AC-8(c), AC-17(a), CM-6(a)
nist-csf	PR.AC-7
ospp	FTA_TAB.1
pcidss	Req-2.2.4
os-srg	SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088
stigid	SLES-15-010040
cis	5.2.18
stigref	SV-234805r951626_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Enable SSH Warning Banner
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*Banner\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*Banner\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*Banner\s+
      line: Banner /etc/issue
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83263-4
  - CJIS-5.5.6
  - DISA-STIG-SLES-15-010040
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(c)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-2.2.4
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_enable_warning_banner

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*Banner\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "Banner /etc/issue" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Limit Users' SSH Access [ref]

By default, the SSH configuration allows any user with an account to access the system. There are several options available to limit which users and group can access the system via SSH. It is recommended that at least one of the following options be leveraged: - AllowUsers variable gives the system administrator the option of allowing specific users to ssh into the system. The list consists of space separated user names. Numeric user IDs are not recognized with this variable. If a system administrator wants to restrict user access further by specifically allowing a user's access only from a particular host, the entry can be specified in the form of user@host. - AllowGroups variable gives the system administrator the option of allowing specific groups of users to ssh into the system. The list consists of space separated group names. Numeric group IDs are not recognized with this variable. - DenyUsers variable gives the system administrator the option of denying specific users to ssh into the system. The list consists of space separated user names. Numeric user IDs are not recognized with this variable. If a system administrator wants to restrict user access further by specifically denying a user's access from a particular host, the entry can be specified in the form of user@host. - DenyGroups variable gives the system administrator the option of denying specific groups of users to ssh into the system. The list consists of space separated group names. Numeric group IDs are not recognized with this variable.

Warning: Automated remediation is not available for this configuration check because each system has unique user names and group names.

Rationale:

Specifying which accounts are allowed SSH access into the system reduces the possibility of unauthorized access to the system.

Severity:

unknown

Rule ID:

xccdf_org.ssgproject.content_rule_sshd_limit_user_access

Identifiers:

CCE-91343-4

References:

cis-csc	11, 12, 14, 15, 16, 18, 3, 5
cobit5	DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06
cui	3.1.12
isa-62443-2009	4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7
iso27001-2013	A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3
nist	AC-3, CM-6(a)
nist-csf	PR.AC-4, PR.AC-6, PR.PT-3
pcidss	Req-2.2.4
cis	5.2.4
pcidss4	2.2.6

Rule Ensure SSH LoginGraceTime is configured [ref]

The LoginGraceTime parameter to the SSH server specifies the time allowed for successful authentication to the SSH server. The longer the Grace period is the more open unauthenticated connections can exist. Like other session controls in this session the Grace Period should be limited to appropriate limits to ensure the service is available for needed access.

Rationale:

Setting the LoginGraceTime parameter to a low number will minimize the risk of successful brute force attacks to the SSH server. It will also limit the number of concurrent unauthenticated connections.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sshd_set_login_grace_time

Identifiers:

CCE-91397-0

References:

cis	5.2.17
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value var_sshd_set_login_grace_time # promote to variable
  set_fact:
    var_sshd_set_login_grace_time: !!str 60
  tags:
    - always

- name: Ensure SSH LoginGraceTime is configured
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*LoginGraceTime\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*LoginGraceTime\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*LoginGraceTime\s+
      line: LoginGraceTime {{ var_sshd_set_login_grace_time }}
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91397-0
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_set_login_grace_time

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_sshd_set_login_grace_time='60'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*LoginGraceTime\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "LoginGraceTime $var_sshd_set_login_grace_time" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Set SSH Daemon LogLevel to VERBOSE [ref]

The VERBOSE parameter configures the SSH daemon to record login and logout activity. To specify the log level in SSH, add or correct the following line in /etc/ssh/sshd_config:

LogLevel VERBOSE

Rationale:

SSH provides several logging levels with varying amounts of verbosity. DEBUG is specifically not recommended other than strictly for debugging SSH communications since it provides so much data that it is difficult to identify important security information. INFO or VERBOSE level is the basic level that only records login activity of SSH users. In many situations, such as Incident Response, it is important to determine when a particular user was active on a system. The logout record can eliminate those users who disconnected, which helps narrow the field.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sshd_set_loglevel_verbose

Identifiers:

CCE-83270-9

References:

disa	CCI-000067
nerc-cip	CIP-007-3 R7.1
nist	AC-17(a), AC-17(1), CM-6(a)
pcidss	Req-2.2.4
os-srg	SRG-OS-000032-GPOS-00013
stigid	SLES-15-010150
cis	5.2.5
pcidss4	2.2.6
stigref	SV-234815r951628_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: Set SSH Daemon LogLevel to VERBOSE
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*LogLevel\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*LogLevel\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*LogLevel\s+
      line: LogLevel VERBOSE
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83270-9
  - DISA-STIG-SLES-15-010150
  - NIST-800-53-AC-17(1)
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_set_loglevel_verbose

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*LogLevel\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "LogLevel VERBOSE" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Set SSH authentication attempt limit [ref]

The MaxAuthTries parameter specifies the maximum number of authentication attempts permitted per connection. Once the number of failures reaches half this value, additional failures are logged. to set MaxAUthTries edit /etc/ssh/sshd_config as follows:

MaxAuthTries 4

Rationale:

Setting the MaxAuthTries parameter to a low number will minimize the risk of successful brute force attacks to the SSH server.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sshd_set_max_auth_tries

Identifiers:

CCE-91332-7

References:

ism	0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561
cis	5.2.7
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value sshd_max_auth_tries_value # promote to variable
  set_fact:
    sshd_max_auth_tries_value: !!str 4
  tags:
    - always

- name: Set SSH authentication attempt limit
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*MaxAuthTries\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*MaxAuthTries\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*MaxAuthTries\s+
      line: MaxAuthTries {{ sshd_max_auth_tries_value }}
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91332-7
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_set_max_auth_tries

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

sshd_max_auth_tries_value='4'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*MaxAuthTries\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "MaxAuthTries $sshd_max_auth_tries_value" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Set SSH MaxSessions limit [ref]

The MaxSessions parameter specifies the maximum number of open sessions permitted from a given connection. To set MaxSessions edit /etc/ssh/sshd_config as follows:

MaxSessions 10

Rationale:

To protect a system from denial of service due to a large number of concurrent sessions, use the rate limiting function of MaxSessions to protect availability of sshd logins and prevent overwhelming the daemon.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sshd_set_max_sessions

Identifiers:

CCE-91309-5

References:

cis	5.2.22
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: XCCDF Value var_sshd_max_sessions # promote to variable
  set_fact:
    var_sshd_max_sessions: !!str 10
  tags:
    - always

- name: Set SSH MaxSessions limit
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*MaxSessions\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*MaxSessions\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*MaxSessions\s+
      line: MaxSessions {{ var_sshd_max_sessions }}
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91309-5
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - sshd_set_max_sessions

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_sshd_max_sessions='10'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*MaxSessions\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "MaxSessions $var_sshd_max_sessions" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Ensure SSH MaxStartups is configured [ref]

The MaxStartups parameter specifies the maximum number of concurrent unauthenticated connections to the SSH daemon. Additional connections will be dropped until authentication succeeds or the LoginGraceTime expires for a connection. To confgure MaxStartups, you should add or correct the following line in the /etc/ssh/sshd_config file:

MaxStartups 10:30:60

CIS recommends a MaxStartups value of '10:30:60', or more restrictive where dictated by site policy.

Rationale:

To protect a system from denial of service due to a large number of pending authentication connection attempts, use the rate limiting function of MaxStartups to protect availability of sshd logins and prevent overwhelming the daemon.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sshd_set_maxstartups

Identifiers:

CCE-91308-7

References:

cis	5.2.21
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value var_sshd_set_maxstartups # promote to variable
  set_fact:
    var_sshd_set_maxstartups: !!str 10:30:60
  tags:
    - always

- name: Ensure SSH MaxStartups is configured
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*MaxStartups\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*MaxStartups\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*MaxStartups\s+
      line: MaxStartups {{ var_sshd_set_maxstartups }}
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91308-7
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_set_maxstartups

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_sshd_set_maxstartups='10:30:60'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*MaxStartups\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "MaxStartups $var_sshd_set_maxstartups" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Use Only FIPS 140-2 Validated Ciphers [ref]

Limit the ciphers to those algorithms which are FIPS-approved. Counter (CTR) mode is also preferred over cipher-block chaining (CBC) mode. The following line in /etc/ssh/sshd_config demonstrates use of FIPS-approved ciphers:

Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc

The man page sshd_config(5) contains a list of supported ciphers. The rule is parametrized to use the following ciphers: chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes128-gcm@openssh.com,aes256-ctr,aes192-ctr,aes128-ctr.

Warning: The system needs to be rebooted for these changes to take effect.

Warning: System Crypto Modules must be provided by a vendor that undergoes FIPS-140 certifications. FIPS-140 is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf To meet this, the system has to have cryptographic software provided by a vendor that has undergone this certification. This means providing documentation, test results, design information, and independent third party review by an accredited lab. While open source software is capable of meeting this, it does not meet FIPS-140 unless the vendor submits to this process.

Rationale:

Unapproved mechanisms that are used for authentication to the cryptographic module are not verified and therefore cannot be relied upon to provide confidentiality or integrity, and system data may be compromised.
Operating systems utilizing encryption are required to use FIPS-compliant mechanisms for authenticating to cryptographic modules.
FIPS 140-2 is the current standard for validating that mechanisms used to access cryptographic modules utilize authentication that meets industry and government requirements. For government systems, this allows Security Levels 1, 2, 3, or 4 for use on SUSE Linux Enterprise 15.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sshd_use_approved_ciphers

Identifiers:

CCE-91337-6

References:

cis-csc	1, 11, 12, 14, 15, 16, 18, 3, 5, 6, 8, 9
cjis	5.5.6
cobit5	APO11.04, APO13.01, BAI03.05, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10, MEA02.01
cui	3.1.13, 3.13.11, 3.13.8
disa	CCI-000068, CCI-000366, CCI-000803, CCI-000877, CCI-002890, CCI-003123
hipaa	164.308(b)(1), 164.308(b)(2), 164.312(e)(1), 164.312(e)(2)(i), 164.312(e)(2)(ii), 164.314(b)(2)(i)
isa-62443-2009	4.3.3.2.2, 4.3.3.3.9, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4
isa-62443-2013	SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
iso27001-2013	A.11.2.6, A.12.1.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.5.1, A.12.6.2, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.18.1.4, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-17(a), AC-17(2), SC-13, MA-4(6), IA-5(1)(c), SC-12(2), SC-12(3)
nist-csf	PR.AC-1, PR.AC-3, PR.AC-4, PR.AC-6, PR.AC-7, PR.IP-1, PR.PT-1, PR.PT-3, PR.PT-4
os-srg	SRG-OS-000033-GPOS-00014, SRG-OS-000120-GPOS-00061, SRG-OS-000125-GPOS-00065, SRG-OS-000250-GPOS-00093, SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174
stigid	SLES-15-010160
cis	5.2.13
pcidss4	2.2.7
stigref	SV-234816r951630_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value sshd_approved_ciphers # promote to variable
  set_fact:
    sshd_approved_ciphers: !!str chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes128-gcm@openssh.com,aes256-ctr,aes192-ctr,aes128-ctr
  tags:
    - always

- name: Use Only FIPS 140-2 Validated Ciphers
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*Ciphers\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*Ciphers\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*Ciphers\s+
      line: Ciphers {{ sshd_approved_ciphers }}
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91337-6
  - CJIS-5.5.6
  - DISA-STIG-SLES-15-010160
  - NIST-800-171-3.1.13
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-AC-17(2)
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-MA-4(6)
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - PCI-DSSv4-2.2.7
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_use_approved_ciphers

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

sshd_approved_ciphers='chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes128-gcm@openssh.com,aes256-ctr,aes192-ctr,aes128-ctr'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^Ciphers")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$sshd_approved_ciphers"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^Ciphers\\>" "/etc/ssh/sshd_config"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^Ciphers\\>.*/$escaped_formatted_output/gi" "/etc/ssh/sshd_config"
else
    if [[ -s "/etc/ssh/sshd_config" ]] && [[ -n "$(tail -c 1 -- "/etc/ssh/sshd_config" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/ssh/sshd_config"
    fi
    cce="CCE-91337-6"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/ssh/sshd_config" >> "/etc/ssh/sshd_config"
    printf '%s\n' "$formatted_output" >> "/etc/ssh/sshd_config"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Use Only FIPS 140-2 Validated MACs [ref]

Limit the MACs to those hash algorithms which are FIPS-approved. The following line in /etc/ssh/sshd_config demonstrates use of FIPS-approved MACs:

MACs hmac-sha2-512,hmac-sha2-256

The man page sshd_config(5) contains a list of supported MACs. The rule is parametrized to use the following MACs: hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512,hmac-sha2-256.

Warning: The system needs to be rebooted for these changes to take effect.

Rationale:

DoD Information Systems are required to use FIPS-approved cryptographic hash functions. The only SSHv2 hash algorithms meeting this requirement is SHA2.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sshd_use_approved_macs

Identifiers:

CCE-91338-4

References:

cis-csc	1, 12, 13, 15, 16, 5, 8
cobit5	APO01.06, APO13.01, DSS01.04, DSS05.02, DSS05.03, DSS05.04, DSS05.07, DSS06.02, DSS06.03
cui	3.1.13, 3.13.11, 3.13.8
disa	CCI-000068, CCI-000803, CCI-000877, CCI-001453, CCI-003123
hipaa	164.308(b)(1), 164.308(b)(2), 164.312(e)(1), 164.312(e)(2)(i), 164.312(e)(2)(ii), 164.314(b)(2)(i)
isa-62443-2009	4.3.3.5.1, 4.3.3.6.6
isa-62443-2013	SR 1.1, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.6, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.11.2.6, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5
nist	CM-6(a), AC-17(a), AC-17(2), SC-13, MA-4(6), SC-12(2), SC-12(3)
nist-csf	PR.AC-1, PR.AC-3, PR.DS-5, PR.PT-4
os-srg	SRG-OS-000125-GPOS-00065, SRG-OS-000250-GPOS-00093, SRG-OS-000394-GPOS-00174
stigid	SLES-15-010270
cis	5.2.14
pcidss4	2.2.7
stigref	SV-234826r951632_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value sshd_approved_macs # promote to variable
  set_fact:
    sshd_approved_macs: !!str hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512,hmac-sha2-256
  tags:
    - always

- name: Use Only FIPS 140-2 Validated MACs
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*MACs\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*MACs\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*MACs\s+
      line: MACs {{ sshd_approved_macs }}
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91338-4
  - DISA-STIG-SLES-15-010270
  - NIST-800-171-3.1.13
  - NIST-800-171-3.13.11
  - NIST-800-171-3.13.8
  - NIST-800-53-AC-17(2)
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-MA-4(6)
  - NIST-800-53-SC-12(2)
  - NIST-800-53-SC-12(3)
  - NIST-800-53-SC-13
  - PCI-DSSv4-2.2.7
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_use_approved_macs

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

sshd_approved_macs='hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512,hmac-sha2-256'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^MACs")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$sshd_approved_macs"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^MACs\\>" "/etc/ssh/sshd_config"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^MACs\\>.*/$escaped_formatted_output/gi" "/etc/ssh/sshd_config"
else
    if [[ -s "/etc/ssh/sshd_config" ]] && [[ -n "$(tail -c 1 -- "/etc/ssh/sshd_config" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/ssh/sshd_config"
    fi
    cce="CCE-91338-4"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/ssh/sshd_config" >> "/etc/ssh/sshd_config"
    printf '%s\n' "$formatted_output" >> "/etc/ssh/sshd_config"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Use Only Strong Ciphers [ref]

Limit the ciphers to strong algorithms. Counter (CTR) mode is also preferred over cipher-block chaining (CBC) mode. The following line in /etc/ssh/sshd_config demonstrates use of those ciphers:

Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes128-gcm@openssh.com,aes256-ctr,aes192-ctr,aes128-ctr

The man page sshd_config(5) contains a list of supported ciphers.

Rationale:

Based on research conducted at various institutions, it was determined that the symmetric portion of the SSH Transport Protocol (as described in RFC 4253) has security weaknesses that allowed recovery of up to 32 bits of plaintext from a block of ciphertext that was encrypted with the Cipher Block Chaining (CBD) method. From that research, new Counter mode algorithms (as described in RFC4344) were designed that are not vulnerable to these types of attacks and these algorithms are now recommended for standard use.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sshd_use_strong_ciphers

Identifiers:

CCE-91395-4

References:

cis	5.2.13

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*Ciphers\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "Ciphers aes128-ctr,aes192-ctr,aes256-ctr,chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes128-gcm@openssh.com" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Use Only Strong Key Exchange algorithms [ref]

Limit the Key Exchange to strong algorithms. The following line in /etc/ssh/sshd_config demonstrates use of those:

KexAlgorithms curve25519-sha256,curve25519-sha256@libssh.org,diffie-hellman-group14-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,ecdh-sha2-nistp521,ecdh-sha2-nistp384,ecdh-sha2-nistp256,diffie-hellman-group-exchange-sha256

Rationale:

Key exchange is any method in cryptography by which cryptographic keys are exchanged between two parties, allowing use of a cryptographic algorithm. If the sender and receiver wish to exchange encrypted messages, each must be equipped to encrypt messages to be sent and decrypt messages received

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sshd_use_strong_kex

Identifiers:

CCE-92626-1

References:

pcidss	Req-2.3
cis	5.2.15
pcidss4	2.2.7

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value sshd_strong_kex # promote to variable
  set_fact:
    sshd_strong_kex: !!str curve25519-sha256,curve25519-sha256@libssh.org,diffie-hellman-group14-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,ecdh-sha2-nistp521,ecdh-sha2-nistp384,ecdh-sha2-nistp256,diffie-hellman-group-exchange-sha256
  tags:
    - always

- name: Use Only Strong Key Exchange algorithms
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*KexAlgorithms\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*KexAlgorithms\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*KexAlgorithms\s+
      line: KexAlgorithms {{ sshd_strong_kex }}
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-92626-1
  - PCI-DSS-Req-2.3
  - PCI-DSSv4-2.2.7
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_use_strong_kex

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

sshd_strong_kex='curve25519-sha256,curve25519-sha256@libssh.org,diffie-hellman-group14-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,ecdh-sha2-nistp521,ecdh-sha2-nistp384,ecdh-sha2-nistp256,diffie-hellman-group-exchange-sha256'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*KexAlgorithms\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "KexAlgorithms $sshd_strong_kex" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Use Only Strong MACs [ref]

Limit the MACs to strong hash algorithms. The following line in /etc/ssh/sshd_config demonstrates use of those MACs:

MACs hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256

Rationale:

MD5 and 96-bit MAC algorithms are considered weak and have been shown to increase exploitability in SSH downgrade attacks. Weak algorithms continue to have a great deal of attention as a weak spot that can be exploited with expanded computing power. An attacker that breaks the algorithm could take advantage of a MiTM position to decrypt the SSH tunnel and capture credentials and information

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_sshd_use_strong_macs

Identifiers:

CCE-91396-2

References:

cis	5.2.14

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	restrict

- name: XCCDF Value sshd_strong_macs # promote to variable
  set_fact:
    sshd_strong_macs: !!str hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256
  tags:
    - always

- name: Use Only Strong MACs
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*MACs\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*MACs\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*MACs\s+
      line: MACs {{ sshd_strong_macs }}
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91396-2
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_use_strong_macs

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

sshd_strong_macs='hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^MACs")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$sshd_strong_macs"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^MACs\\>" "/etc/ssh/sshd_config"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^MACs\\>.*/$escaped_formatted_output/gi" "/etc/ssh/sshd_config"
else
    if [[ -s "/etc/ssh/sshd_config" ]] && [[ -n "$(tail -c 1 -- "/etc/ssh/sshd_config" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/ssh/sshd_config"
    fi
    cce="CCE-91396-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/ssh/sshd_config" >> "/etc/ssh/sshd_config"
    printf '%s\n' "$formatted_output" >> "/etc/ssh/sshd_config"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Group Who Owns SSH Server config file [ref]

To properly set the group owner of /etc/ssh/sshd_config, run the command:

$ sudo chgrp root /etc/ssh/sshd_config

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_groupowner_sshd_config

Identifiers:

CCE-91392-1

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	AC-17(a), CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.2.1
anssi	R50

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/ssh/sshd_config
  stat:
    path: /etc/ssh/sshd_config
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91392-1
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_groupowner_sshd_config
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/ssh/sshd_config
  file:
    path: /etc/ssh/sshd_config
    group: '0'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91392-1
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_groupowner_sshd_config
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chgrp 0 /etc/ssh/sshd_config

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Owner on SSH Server config file [ref]

To properly set the owner of /etc/ssh/sshd_config, run the command:

$ sudo chown root /etc/ssh/sshd_config

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_owner_sshd_config

Identifiers:

CCE-91393-9

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	AC-17(a), CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.2.1
anssi	R50

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/ssh/sshd_config
  stat:
    path: /etc/ssh/sshd_config
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91393-9
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_owner_sshd_config
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/ssh/sshd_config
  file:
    path: /etc/ssh/sshd_config
    owner: '0'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91393-9
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_owner_sshd_config
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chown 0 /etc/ssh/sshd_config

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Permissions on SSH Server config file [ref]

To properly set the permissions of /etc/ssh/sshd_config, run the command:

$ sudo chmod 0600 /etc/ssh/sshd_config

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_sshd_config

Identifiers:

CCE-91306-1

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	AC-17(a), CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
os-srg	SRG-OS-000480-GPOS-00227
cis	5.2.1
anssi	R50
pcidss4	2.2.6

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Test for existence /etc/ssh/sshd_config
  stat:
    path: /etc/ssh/sshd_config
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-91306-1
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_sshd_config
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xwrs,o-xwrt on /etc/ssh/sshd_config
  file:
    path: /etc/ssh/sshd_config
    mode: u-xs,g-xwrs,o-xwrt
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CCE-91306-1
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_sshd_config
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chmod u-xs,g-xwrs,o-xwrt /etc/ssh/sshd_config

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Permissions on SSH Server Private *_key Key Files [ref]

SSH server private keys - files that match the /etc/ssh/*_key glob, have to have restricted permissions. If those files are owned by the root user and the root group, they have to have the 0640 permission or stricter.

Rationale:

If an unauthorized user obtains the private SSH host key file, the host could be impersonated.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_sshd_private_key

Identifiers:

CCE-85644-3

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
cui	3.1.13, 3.13.10
disa	CCI-000366
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	AC-17(a), CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
pcidss	Req-2.2.4
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040250
cis	5.2.2
anssi	R50
pcidss4	2.2.6
stigref	SV-235009r880958_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Find root:root-owned keys
  ansible.builtin.command: find -H /etc/ssh/ -maxdepth 1 -user root -regex ".*_key$"
    -type f -group root -perm /u+xs,g+xws,o+xwrt
  register: root_owned_keys
  changed_when: false
  failed_when: false
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85644-3
  - DISA-STIG-SLES-15-040250
  - NIST-800-171-3.1.13
  - NIST-800-171-3.13.10
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_sshd_private_key
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set permissions for root:root-owned keys
  ansible.builtin.file:
    path: '{{ item }}'
    mode: u-xs,g-xws,o-xwrt
    state: file
  with_items:
  - '{{ root_owned_keys.stdout_lines }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85644-3
  - DISA-STIG-SLES-15-040250
  - NIST-800-171-3.1.13
  - NIST-800-171-3.13.10
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_sshd_private_key
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Puppet snippet ⇲

include ssh_private_key_perms

class ssh_private_key_perms {
  exec { 'sshd_priv_key':
    command => "chmod 0640 /etc/ssh/*_key",
    path    => '/bin:/usr/bin'
  }
}

Remediation Shell script ⇲

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

for keyfile in /etc/ssh/*_key; do
    test -f "$keyfile" || continue
    if test root:root = "$(stat -c "%U:%G" "$keyfile")"; then
    
	chmod u-xs,g-xws,o-xwrt "$keyfile"
    
    
    else
        echo "Key-like file '$keyfile' is owned by an unexpected user:group combination"
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule Verify Permissions on SSH Server Public *.pub Key Files [ref]

To properly set the permissions of /etc/ssh/*.pub, run the command:

$ sudo chmod 0644 /etc/ssh/*.pub

Rationale:

If a public host key file is modified by an unauthorized user, the SSH service may be compromised.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_file_permissions_sshd_pub_key

Identifiers:

CCE-85643-5

References:

cis-csc	12, 13, 14, 15, 16, 18, 3, 5
cobit5	APO01.06, DSS05.04, DSS05.07, DSS06.02
cui	3.1.13, 3.13.10
disa	CCI-000366
isa-62443-2009	4.3.3.7.3
isa-62443-2013	SR 2.1, SR 5.2
iso27001-2013	A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5
nerc-cip	CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2
nist	AC-17(a), CM-6(a), AC-6(1)
nist-csf	PR.AC-4, PR.DS-5
pcidss	Req-2.2.4
os-srg	SRG-OS-000480-GPOS-00227
stigid	SLES-15-040240
cis	5.2.3
anssi	R50
pcidss4	2.2.6
stigref	SV-235008r622137_rule

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

- name: Find /etc/ssh/ file(s)
  command: find -H /etc/ssh/ -maxdepth 1 -perm /u+xs,g+xws,o+xwt  -type f -regex "^.*\.pub$"
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85643-5
  - DISA-STIG-SLES-15-040240
  - NIST-800-171-3.1.13
  - NIST-800-171-3.13.10
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_sshd_pub_key
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set permissions for /etc/ssh/ file(s)
  file:
    path: '{{ item }}'
    mode: u-xs,g-xws,o-xwt
    state: file
  with_items:
  - '{{ files_found.stdout_lines }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85643-5
  - DISA-STIG-SLES-15-040240
  - NIST-800-171-3.1.13
  - NIST-800-171-3.13.10
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_sshd_pub_key
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Remediation Puppet snippet ⇲

include ssh_public_key_perms

class ssh_public_key_perms {
  exec { 'sshd_pub_key':
    command => "chmod 0644 /etc/ssh/*.pub",
    path    => '/bin:/usr/bin'
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	configure

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/ssh/ -maxdepth 1 -perm /u+xs,g+xws,o+xwt  -type f -regex '^.*\.pub$' -exec chmod u-xs,g-xws,o-xwt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Group X Window System Group contains 1 group and 2 rules

[ref] The X Window System implementation included with the system is called X.org.

Group Disable X Windows Group contains 2 rules

[ref] Unless there is a mission-critical reason for the system to run a graphical user interface, ensure X is not set to start automatically at boot and remove the X Windows software packages. There is usually no reason to run X Windows on a dedicated server system, as it increases the system's attack surface and consumes system resources. Administrators of server systems should instead login via SSH or on the text console.

Rule Remove the X Windows Package Group [ref]

By removing the xorg-x11-server-common package, the system no longer has X Windows installed. If X Windows is not installed then the system cannot boot into graphical user mode. This prevents the system from being accidentally or maliciously booted into a graphical.target mode. To do so, run the following command:

$ sudo zypper groupremove "X Window System"

$ sudo zypper remove xorg-x11-server-common

Warning: The installation and use of a Graphical User Interface (GUI) increases your attack vector and decreases your overall security posture. Removing the package xorg-x11-server-common package will remove the graphical target which might bring your system to an inconsistent state requiring additional configuration to access the system again. If a GUI is an operational requirement, a tailored profile that removes this rule should used before continuing installation.

Rationale:

Unnecessary service packages must not be installed to decrease the attack surface of the system. X windows has a long history of security vulnerabilities and should not be installed unless approved and documented.

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_package_xorg-x11-server-common_removed

Identifiers:

CCE-91361-6

References:

cis-csc	12, 15, 8
cobit5	APO13.01, DSS01.04, DSS05.02, DSS05.03
disa	CCI-000366
isa-62443-2009	4.3.3.6.6
isa-62443-2013	SR 1.13, SR 2.6, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6
iso27001-2013	A.11.2.6, A.13.1.1, A.13.2.1, A.14.1.3, A.6.2.1, A.6.2.2
nist	CM-7(a), CM-7(b), CM-6(a)
nist-csf	PR.AC-3, PR.PT-4
os-srg	SRG-OS-000480-GPOS-00227
cis	2.2.2

Remediation Ansible snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

- name: Ensure xorg-x11-server-common is removed
  package:
    name: xorg-x11-server-common
    state: absent
  tags:
  - CCE-91361-6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_xorg-x11-server-common_removed

Remediation Puppet snippet ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable

include remove_xorg-x11-server-common

class remove_xorg-x11-server-common {
  package { 'xorg-x11-server-common':
    ensure => 'purged',
  }
}

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	false
Strategy:	disable


# CAUTION: This remediation script will remove xorg-x11-server-common
#	   from the system, and may remove any packages
#	   that depend on xorg-x11-server-common. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

zypper remove -y "xorg-x11-server-common"

Rule Disable graphical user interface [ref]

By removing the following packages, the system no longer has X Windows installed. xorg-x11-server-Xorg xorg-x11-server-common xorg-x11-server-utils xorg-x11-server-Xwayland If X Windows is not installed then the system cannot boot into graphical user mode. This prevents the system from being accidentally or maliciously booted into a graphical.target mode. To do so, run the following command:

sudo zypper remove xorg-x11-server-Xorg xorg-x11-server-common xorg-x11-server-utils xorg-x11-server-Xwayland

Warning: The installation and use of a Graphical User Interface (GUI) increases your attack vector and decreases your overall security posture. Removing the package xorg-x11-server-common package will remove the graphical target which might bring your system to an inconsistent state requiring additional configuration to access the system again. The rule xwindows_runlevel_target can be used to configure the system to boot into the multi-user.target. If a GUI is an operational requirement, a tailored profile that removes this rule should be used before continuing installation.

Rationale:

Severity:

medium

Rule ID: xccdf_org.ssgproject.content_rule_xwindows_remove_packages

Identifiers:

CCE-91362-4

References:

disa	CCI-000366
nist	CM-6(b)
os-srg	SRG-OS-000480-GPOS-00227
cis	2.2.2

Remediation Anaconda snippet ⇲


package --remove=xorg-x11-server-Xorg --remove=xorg-x11-server-common --remove=xorg-x11-server-utils --remove=xorg-x11-server-Xwayland

Remediation Shell script ⇲

Complexity:	low
Disruption:	low
Reboot:	true
Strategy:	restrict



# remove packages
zypper remove -y "xorg-x11-server-Xorg"
zypper remove -y "xorg-x11-server-utils"
zypper remove -y "xorg-x11-server-common"

zypper remove -y "xorg-x11-server-Xwayland"

Red Hat and Red Hat Enterprise Linux are either registered trademarks or trademarks of Red Hat, Inc. in the United States and other countries. All other names are registered trademarks or trademarks of their respective companies.